Nitoproof 600 PDF
Nitoproof 600 PDF
constructive solutions
Properties
15 hours
48 hours @ 1.3mm
thickness
Advantages
! One component; ready to apply direct from the can
! Liquid application means details are simplified and there
are no joints in the membrane
! Highly elastic, cures to give a permanently flexible resilient
barrier over a wide range of temperatures
! Rapid installation; significantly reduces time spent on
preparatory works and detailing
! Excellent adhesion, can be applied to a wide range of
substrates. Continuous adhesion prevents lateral
migration of water
! Impervious - outstanding barrier properties ensure
protection against corrosive soil conditions
! Thermally stable - irreversible chemical cure eliminates
melting and flow at high temperature
! Excellent resistance to oxidation and embrittlement
! Mechanical damage to the membrane can be easily
repaired by spot application
620 %
1.5 N/mm2
0.62 N/mm2
95 %
15 N
No cracking or tearing
-40C to 70C
Chemical properties
Standard compliance
Nitoproof 600 meets the requirements of ASTM C836-84.
Description
Nitoproof 600*
Nitoproof 600*
Instructions for use
Preparation
All right angle bends must have a cant strip or coving detail
installed. This may be formed in either sand & cement or
Plastijoint* and it must be bedded into a layer of Nitoproof 600,
then given a reinforcing pretreatment by application of a 1.3mm
thick coat extending 150mm either side of the coving. Whilst
still wet, a 150mm wide strip of Nitoproof Scrim is embedded
into the Nitoproof 600 as reinforcement (ensure thorough
wetting).
Priming
Application
Movement joints
All expansion and movement joints should be sealed with
Nitoseal 220*. When cured, Nitoseal Debonding Tape*
should be applied to the top surface of the sealant and the
joint then overcoated with a 1.3mm thick application of Nitoproof
600 extending 150mm each side of the tape. Embed a 100mm
or 150mm wide strip of Nitoproof Scrim*, then allow to cure
before general application.
Cracks
All shrinkage and non-moving structural cracks should be
pretreated with not less than a 1.3mm coating of Nitoproof
600 extending 75mm either side of the crack. Allow to cure
overnight before general application.
Nitoproof 600*
Curing and protection
Storage
Shelf life
Limitations
Fire
Technical support
Fosroc offers a comprehensive range of high performance,
high quality repair, maintenance and construction products. In
addition, Fosroc offers a technical support package to
specifiers, end-users and contractors, as well as on-site
technical assistance in locations all over the world.
Supply
:
:
:
:
:
20 litre drums
1 litre packs
20 litre containers
1000 mm wide x 50 m long
5 and 25 litre containers
:
:
Coverage
Nitoproof 600
Nitoprime 32
45C
23C
33C
Estimating
Nitoproof 600
Nitoprime 32
Nitoproof Reflectacoat
Nitoproof Scrim
Fosroc Solvent 102
:
:
:
Nitoproof 600*
Additional Information
Fosroc manufactures a wide range of complementary
products which include :
! waterproofing membranes & waterstops
! joint sealants & filler boards
! cementitious & epoxy grouts
! specialised flooring materials
Fosroc additionally offers a comprehensive package of
products specifically designed for the repair and
refurbishment of damaged concrete. Fosrocs Systematic
Approach to concrete repair features the following :
! hand-placed repair mortars
! spray grade repair mortars
! fluid micro-concretes
! chemically resistant epoxy mortars
! anti-carbonation/anti-chloride protective coatings
! chemical and abrasion resistant coatings
For further information on any of the above, please consult
your local Fosroc office - as below.
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard
Conditions for the Supply of Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the users
responsibility to obtain the recent version. Refer to www.fosroc.com.
Al Gurg Fosroc
LLC
Post Box 657, Dubai
United Arab Emirates
www.fosroc.com
Head Office
telephone: (+9714) 2039699
email: [email protected]
Regional offices
Abu Dhabi, Al Gurg Fosroc
Bahrain, YBA Kanoo
email: [email protected]
email: [email protected]
Kuwait, Boodai
Oman, Al Amana
Qatar, Tadmur
telephone: 4817618
telephone: 24815080
telephone: 4500607
fax: 4832124
fax: 24817554
fax: 4500543
email: [email protected]
email: [email protected]
email: [email protected]
UAE/0282/00/B