Ajuste de TLV para Trabajos Inusuales IRRSST PDF
Ajuste de TLV para Trabajos Inusuales IRRSST PDF
Studies and
Research Projects
TECHNICAL GUIDE T-22
Daniel Drolet
OUR
RESEARCH
is working for you !
Mission
To contribute, through research, to the prevention of
industrial accidents and occupational diseases as well
as to the rehabilitation of affected workers.
To offer the laboratory services and expertise necessary
for the activities of the public occupational health and
safety prevention network.
To disseminate knowledge, and to act as scientific
benchmark and expert.
Funded by the Commission de la sant et de la scurit
du travail, the IRSST has a board of directors made up
of an equal number of employer and worker representatives.
Legal Deposit
Bibliothque et Archives nationales
2008
ISBN: 978-2-89631-239-9 (print format)
ISBN: 978-2-89631-240-5 (PDF)
ISBN: 2-551-22644-9 (Edition 2004)
ISSN: 0820-8395
Studies and
Research Projects
TECHNICAL GUIDE T-22
Disclaimer
The IRSST makes no guarantee
regarding the accuracy, reliability
or completeness of the information
contained in this document. In no
case shall the IRSST be held
responsible for any physical or
psychological injury or material
damage resulting from the use of
this information.
Daniel Drolet,
Laboratory Services and Expertise, IRSST
This study was financed by the IRSST. The conclusions and recommendations are those of the author.
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Acknowledgements
This guide was produced as a result of the work of numerous people during projects or activities
conducted in the past in collaboration with the Department of Environmental and Occupational Health of the
Universit de Montral and the IRSST: Adolf Vyskocil, Guy Perrault, Jules Brodeur, Daniel Drolet, Franois
Lemay, Thierry Petitjean-Roget, Robert Tardif and Ginette Truchon.
The members of Technical Committee (3.33.1) for Schedule I of the Regulation respecting occupational
health and safety (RROHS) and many professionals from the Qubec occupational health and safety network
also provided their support in these projects and/or activities.
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
iii
Table of contents
Acknowledgements ............................................................................................................................... i
IRSST Web Site .................................................................................................................................... i
New information in this version ............................................................................................................. i
Pramble .............................................................................................................................................. v
Introduction ..........................................................................................................................................1
Adjustment recommendations .............................................................................................................2
Definitions............................................................................................................................................. 2
Conditions of application ...................................................................................................................... 2
PEV adjustment procedure .................................................................................................................. 2
Calculating the AAEV........................................................................................................................... 3
Conclusion ...........................................................................................................................................5
References ..........................................................................................................................................7
Appendix I : Consensus of the Schedule I Committee ........................................................................8
Appendix II: Examples of PEV adjustment..........................................................................................9
Scenario 1: Hydrogen cyanide ............................................................................................................. 9
Scenario 2: Acetonitrile ........................................................................................................................ 9
Scenario 3 : Lead ................................................................................................................................. 9
Scenario 4 : Styrene............................................................................................................................. 9
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Pramble
The standards for chemical contaminants found in various national regulations and reference values such
as the TLVs (Threshold Limit Values) of the American Conference of Governmental Industrial Hygienists
(ACGIH)2 have contributed greatly to the prevention of occupational diseases caused by worker exposure to
hazardous substances. However, it is important to clearly understand the scope and limitations of the
standards and TLVs in order to discuss their adjustments. Standards such as TLVs assume an applicability
to workers with a regular work schedule of 8 hours per day, five days per week. The ACGIH emphasizes
that the adjustment of TLVs in the case of extended work schedules requires a particular judgment and has
recommended, for several years, the use of the Brief and Scala correction model. Since 2004, the ACGIH
has also referred to the model jointly developed by the Universit de Montral and the Institut de recherch
Robert-Sauv en Sant et en Scurit du Travail of Qubec described in this guide, while emphasizing that it
generates results even closer to the physiologically-based toxicokinetic models (PBPK) than the Brief & Scala
model.
This guide is the result of scientific expertise, consultations and the bipartite consensus of Technical
Committee (3.33.1) on Schedule I of the RROHS. It proposes a structured process that remains complex
despite the efforts that have been made to simplify it without increasing worker health risks. However, this
complexity reflects the significance and method of application of PEVs that serve as reference conditions.
PEV adjustment is based on the toxicological knowledge available in the scientific and technical literature.
However, the limits of our knowledge have to be recognized regarding dose-response relationships applicable
to humans, dose-absorption kinetics relating to saturation of defense mechanisms, animal-human
extrapolation of toxicological data, the distribution of contaminants and their metabolites at the point of action
of target organs, etc.
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Introduction
Current knowledge on the adjustment of PEVs to unusual work schedules, meaning schedules other than
eight hours per day, five days per week, was recently summarized in several publications particularly relevant
to the Qubec context3,4,5,6,7,8. These publications describe the main methods for calculating PEV adjustment
factors in the case of substances that require an adjustment.
The PEV adjustment process in this guide is based
Guiding principle
on a guiding principle that was agreed on in Technical
Committee 3.33.1 for Schedule I of the RROHS7. In
ensuring an equivalent degree of protection to
toxicological terms, for many chemical contaminants,
workers with a conventional schedule of 8 hours a
an equilibrium is established between the
day, 5 days a week, and to workers with unusual
accumulation of a contaminant in the body during the
work schedules.
time at work and the elimination of the contaminant
during the time away from work (this period is
assumed to be exposure-free) until the maximum body burden or accumulation plateau in the body is reached.
The time-weighted average exposure value (TWAEV) applicable to workers exposed to these contaminants
during unusual work schedules must therefore be modified to ensure that the maximum body burden does not
exceed the maximum body burden reached by a worker with a conventional work schedule. As a corollary,
no adjustment of the standard is necessary for any means of exposure or any toxic action of a contaminant
that is unrelated in any way to the body burden.
With this guiding principle as a basis and using the logic of the Occupational Safety and Health
Administration3 (OSHA) as inspiration, a group of toxicologists met at the IRSST to propose adjustment
categories9 (I, II, III and IV) for each of the substances found in Schedule I of the RROHS as well as a method
for calculating adjustment factors supported by toxicokinetic modeling10,11. This group of experts also defined
the conditions and limitations of application of the adjustment procedure.
Using these recommendations, the members of Technical Committee 3.33.1 for Schedule I of the RROHS
of the Commission de la Sant et de la Scurit du Travail (CSST, Qubec workers compensation board)
established a consensus on the conditions of application of PEV adjustment (see Appendix I). The present
guide is the tool for facilitating the application of PEV adjustment for unusual work schedules using
toxicological considerations as a basis as reviewed by consensus by the members of the Schedule I
committee. It provides several definitions and conditions of application, explains the PEV adjustment process
and the interpretation of the adjusted average exposure value (AAEV), and presents some application
examples in the appendix II.
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
Adjustment recommendations
Definitions
Repetitive work cycle: calendar period during which the work schedule (work shift) is exactly repeated on
a daily and weekly basis.
For example, a conventional schedule of 8h/d (Monday to Friday) and 5d/wk is a repetitive calendarweek work cycle; a schedule of 10 h/d (Tuesday to Friday) is also a repetitive calendar-week work
cycle. However, a schedule of 12 h/d for 7 consecutive days, followed by 7 days off, would be a 14-day
repetitive cycle. If this same schedule consists of alternating weeks of day and night shifts, it would
then be a 28-day repetitive cycle.
Average exposure duration in hours per week based on a repetitive work cycle: the arithmetic mean in
hours (Hw) of the weekly total (7 days) of the work shifts during the repetitive work cycle.
For example, a schedule of 8 h/d (Monday to Friday), 5 d/wk, gives an average exposure duration in
hours per week based on a repetitive work cycle of 40 h/wk; a schedule of 10 h/d, 4 d/wk (Tuesday to
Friday) also represents an average exposure duration in hours per week based on a repetitive work cycle
of 40 h/wk. However, a schedule of 12 h/d for 7 consecutive days, followed by 7 days off, corresponds
to an average exposure duration in hours per week based on a repetitive work cycle of 42 h/wk.
Multiple exposure: daily exposure to several substances
Nominal schedule: normal work schedule based on the agreement between the employer and worker
without including overtime and occasional replacement work. As a general rule, this schedule should
represent at least 80% of the hours actually worked.
Conditions of application
The short-term exposure values (STEV) and ceiling values (CV) are not subject to the adjustment
principle; only the TWAEVs are subject to the adjustment principle;
The TWAEV adjustment process applies only to nominal schedules with shifts of no less than 4 hours
and no more than 16 hours.
In no case can the AAEV be greater than the TWAEV.
In the case of daily exposures to several substances, the equation in part 3 of Schedule I of the RROHS
applies by replacing T (TWAEV) by Ta (AAEV).
The excursion limits for substances that have no STEV apply directly to the AAEV. Similarly,
exposures between the STEV and the TWAEV must be taken into consideration as described in the
RROHS by replacing the TWAEV by the AAEV.
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Adjustment classification
Type of adjustment
No adjustment
Daily adjustment
Weekly adjustment
II
IV
Fa = 8 / H d
Fa = 40 / H wk
Fa = adjustment factor
Hd = exposure duration in hours per shift
Hwk = average duration of work shifts per week based on a repetitive work cycle.
In the case of Category IV substances, the Fa must be calculated for each of the two equations for
Categories II and III, and the lowest Fa must be applied. It should be noted that the above-mentioned
computer-based tool automatically calculates the AAEV from the most conservative Fa.
To obtain Fa rapidly, Appendix IV of this document supplies the adjustment categories for all of the
substances in the RROHS, and Table 2 presents the Fa for most of the possible unusual schedules. The only
exception to the application of Table 2 involves Category II and IV substances in the case of work schedules
in which the work shifts vary in duration from day to day.
To use Table 2, the length of the repetitive work cycle must be determined and the average exposure
durations be established based on the adjustment category of the substance considered.
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
The time-weighted average concentration for an 8-hour workday and a 40-hour workweek of
a chemical substance (in the form of gases, dusts, fumes, vapours or mists) present in the air in
a worker's respiratory zone.
To verify compliance with the TWAEV, the occupational health and safety professional will evaluate the
concentration of a substance present in the workers breathing zone by weighting the result or results of the
measured concentrations on the basis of a workshift of eight consecutive hours. In this case, the repetitive
work cycle is one week and the duration of the work shifts is constant from day to day and corresponds to the
duration of the hours worked, or eight hours. Regardless of the nature of the pathologies that can be caused
by the presence of this substance in the workplace, verification of compliance with the TWAEV or AAEV is
always done a daily basis.
Table 2 :
Adjustment factor for unusual work schedules based on the duration of work shifts (h/d) and the
average duration of work weeks (h/wk)
Category I : No adjustment
Category III
FA
8,0
1,00
40
1,00
8,5
0,94
41
0,98
9,0
0,89
42
0,95
9,5
0,84
43
10,0
0,80
0,76
11,0
0,73
9,0
9,5
10,0 10,5 11,0 11,5 12,0 12,5 13,0 13,5 14,0 14,5 15,0 15,5 16,0
0,94
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
0,99
0,94
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
41,0
0,98
0,94
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
0,93
41,5
0,96
0,94
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
44
0,91
42,0
0,95
0,94
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
45
0,89
42,5
0,94
0,94
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
43,0
0,93
0,93
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
43,5
0,92
0,92
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
44,0
0,91
0,91
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
44,5
0,90
0,90
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
45,0
0,89
0,89
0,89
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
45,5
0,88
0,88
0,88
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
46,0
0,87
0,87
0,87
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
46,5
0,86
0,86
0,86
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
47,0
0,85
0,85
0,85
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
47,5
0,84
0,84
0,84
0,84
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
46
0,87
0,85
12,0
0,67
48
0,83
12,5
0,64
49
0,82
0,62
50
0,80
0,59
51
0,78
0,57
8,5
1,00
47
14,0
8,0
40,0
0,70
13,5
FA
40,5
11,5
13,0
h/day
h/wk FA
h/day
10,5
Category IV
52
0,77
Category II*
14,5
0,55
53
0,75
15,0
0,53
54
0,74
48,0
0,83
0,83
0,83
0,83
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
15,5
0,52
55
0,73
48,5
0,82
0,82
0,82
0,82
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
0,71
49,0
0,82
0,82
0,82
0,82
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
0,70
49,5
0,81
0,81
0,81
0,81
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
50,0
0,80
0,80
0,80
0,80
0,80
0,76
0,73
0,70
0,67
0,64
0,62
0,59
0,57
0,55
0,53
0,52
0,50
16,0
0,50
*: the duration of
work shifts must be
equal from one day
to the next
56
57
58
0,69
59
0,68
60
0,67
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Conclusion
The process of adjusting TWAEVs into AAEVs is summarized in Figure 1. An AAEV cannot be greater
than the TWAEV. STEVs and CVs are never adjusted. All the other definitions and provisions of the
RROHS apply to the AAEV by replacing the TWAEV with the AAEV in the text.
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
I
No
adjustment
II
Variable
Table 2, category II
Table 2, category II
III
IV
Table 2, category IV
FA based on to the duration of the work shifts
(h/d) and the average work week (h/wk)
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
References
1- Regulation respecting occupational health and safety, S-2.1, r.19.01, O.C. 1120-2006, modified by Order in
Council 1120-2006. diteur officiel du Qubec (1st quarter 2007). HTML file
2- American Conference of Governmental Industrial Hygienists. 2007 TLVs and BEIs. ACGIH, Cincinnati, Ohio,
238 p.
3- Paustenbach, D.J.: Occupational Exposure Limits, Pharmacokinetics and Unusual Work Schedule. in Pattys
Industrial Hygiene and Toxicology, 3rd Edition, Vol. 3, Part A, Edited by R.L. Harris, L.J. Cralley and L.V.
Cralley, 191-348, 1994.
4- Brodeur, J., Krishnan, K. and Goyal, R.: Analyse critique portant sur la conversion des valeurs limites tolrables
dans lair (TLV) et des valeurs limites tolrables dans les milieux biologiques (BLV) en vue de les adapter des
horaires de travail non conventionnels. IRSST report, June 1993, R-070.
http://www.irsst.qc.ca/files/documents/PubIRSST/R-070.pdf
5- Verma, D. K.: Adjustment of Occupational Exposure Limits for Unusual Work Schedules AIHAJ, 60: 367-374,
2001.
6- Brodeur, J., Vyskocil, A., Tardif, R., Perrault, G., Drolet, D., Truchon, G., Lemay, F.: Adjustment of Permissible
Exposure Values to Unusual Schedules AIHAJ, 62: 584-594, 2001.
7- Brodeur, J., Vyskocil, A., Tardif, R., Perrault, G., Drolet, D., Truchon, G., Lemay, F. : Ajustement des valeurs
dexposition admissibles pour des horaires des travail non conventionnels. IRSST report, R-168, October 1997,
32 p. http://www.irsst.qc.ca/files/documents/PubIRSST/R-168.pdf
8- Armstrong, T.A., Caldwell, D.J., Verma, D. K.: Occupational Exposure Limits: an Approach and Calculation Aid
for Extended Work Schedule Adjustments for Unusual Work Schedules. JOEHS, 2 : 600-607, 2005.
9- Institut de recherche en sant et en scurit du travail: Fiches dajustements IRSST report RA2-168, October
1997, 668 p. http://www.irsst.qc.ca/files/documents/PubIRSST/RA2-168-1.pdf ,
http://www.irsst.qc.ca/files/documents/PubIRSST/RA2-168-2.pdf
10- Lapar, S., Tardif, R. and Brodeur, J.: Contribution de la modlisation toxicocintique IRSST report, RA1-168,
October 1997, 68 p., http://www.irsst.qc.ca/files/documents/PubIRSST/RA1-168.pdf
11- Lapar, S., Brodeur, J., Tardif: Contribution of Toxicokinetic Modeling to the Adjustment of Exposure Limits to
Unusual Work Schedules AIHAJ, 64: 17-23, 2003.
12- Vyskocil A., Drolet D., Viau C., Lemay F., Lapointe G., Tardif R., Truchon G., Baril M., Gagnon N.,
Gagnon F., Bgin D., Grin M.: A web tool for the identification of potential interactive effects of chemical
mixtures. JOEHS, 4(4), 281-287, 2007.
13- Vyskocil A., Drolet D., Viau C., Brodeur J., Tardif R., Grin M., Baril M., Truchon G., Lapointe, G.
Database for the toxicological evaluation of mixtures in occupational atmospheres. Environmental Toxicology
and Pharmacology,18, (3), 235-242, 2004.
14- Institut de recherche en sant et en scurit du travail (IRSST). Sampling Guide for Air Contaminants in the
Workplace. 7th edition revised and updated. T-15, September 2000.
http://www.irsst.qc.ca/files/documents/PubIRSST/T-06.pdf
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
Include acetone, aniline, chlorine, hexane (other isomers) and hydrogen sulfide in Category I, without adjustment.
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Scenario 2: Acetonitrile
A laboratory technician uses acetonitrile regularly as a solvent. He works 12 h/d, 4 d/wk, with alternating
weeks from Monday to Thursday and from Tuesday to Friday. What is the AAEV that applies in his case?
The adjustment category for this substance as found in Appendix IV of this document indicates category II
for acetonitrile, or a daily adjustment. Figure 1 indicates that for all category II substances, one first has to
specify whether the work shifts in his nominal schedule are always the same length from day to day. In this
case, the duration of the work shifts is constant at 12 hours, so we consult Table 2. Under the Category II
heading, at 12.0 h/day, the adjustment factor is 0.67. The AAEV is therefore 45 mg/m (67 mg/m * 0.67).
The sampling strategy14 must anticipate a 12-hour weighting of the representative results for the entire
shift.
Scenario 3 : Lead
In a plant recovering lead from automobile batteries and other sources, workers have schedules with 12hour shifts for two consecutive weeks of 3 days and 4 days. What would be the AAEV for lead that would
apply to these workers?
The adjustment category for this substance as found in Appendix IV of this document indicates category
III for Lead and its inorganic compounds, dusts and fumes (expressed as Pb), or a weekly adjustment.
Figure 1 indicates that for all category III substances, the repetitive work cycle must first be specified, or two
weeks (14 days), and the average exposure duration in hours per week based on a repetitive work cycle, or 42
hours (36+48)/2. This allows us to consult Table 2; under the Category III heading, at 42.0 h/week, the
adjustment factor is 0.95. Therefore the AAEV becomes 0.14 mg/m (0.15 mg/m * 0.95).
The sampling strategy must anticipate a 12-hour weighting of the representative results14 for the entire
shift.
Scenario 4 : Styrene
A fiberglass pleasure boat manufacturing plant has a work schedule consisting of three working days
followed by three days off. All the work shifts are 12 h/d. For workers using styrene to manufacture the
polymeric coating, what would the AAEV be?
10
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
The adjustment category for this substance as found in Appendix IV of this document indicates category
IV for styrene, or that the most conservative daily or weekly value must be used. Figure 1 indicates that for
all category IV substances, categories II and III must be calculated and the most conservative result of the two
must be applied.
Therefore, for category II, since all the work shifts are of the same length, or 12 hours, Table 2, under
the Category II heading at 12 h/day, gives the adjustment factor as 0.67. The AAEV would therefore be
142 mg/m (213 mg/m * 0.67).
For category III, the repetitive work cycle must first be specified, which is 42 days, as summarized in the
following table:
Week
Monday
Tuesday
W: work
Wednesday Thursday
Friday
Saturday
Sunday
A: Absence
This cycle includes three weeks of 3 shifts (36 hours) and three weeks of 4 shifts (48 hours). The average
exposure duration in hours per week based on a repetitive work cycle is 42 hours ((36*3)+(48*3))/6. We then
consult Table 2; under the Category III heading, at 42.0 h/week, the adjustment factor is 0.95. Therefore the
AAEV would be 203 mg/m (213 mg/m * 0.95).
The AAEV of 142 mg/m, being the most conservative, is therefore applicable to these workers
exposure. Table 2 under the Category IV heading arrives at the same conclusion. In fact, the intersection
point of the 42-hour row and the 12-hour column gives an adjustment factor (Fa) of 0.67.
The sampling strategy must anticipate a 12-hour weighting of the representative results14 for the entire
shift.
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
11
12
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
I-a
I-b
I-b
I-c
I-a
II
I-b
I-c
II
I-b
III
I-b
III
III
IV
IV
I-b
I-b
I-b
I-b
Benzidine (production)
I-c
Benzo(a)pyrene
I-c
Benzo(b)fluoranthene
I-b
Arsine
Asbestos, Actinolite
Asbestos, Amosite
Asbestos, Anthophyllite
Asbestos, Chrysotile
Asbestos, Crocidolite
Asbestos, Tremolite
Asphalt (petroleum) fumes
Atrazine
Azinphos-methyl
Barium, soluble compounds (as
Ba)
Barium sulfate, Pt
Barium sulfate, Pr
Benomyl
Benz(a)anthracene
Benzene
p-Benzoquinone
Benzoyl peroxide
I-c
Benzyl chloride
I-c
III
III
II
III
I-b
I-b
III
I-b
I-c
II
II
III
Bromotrifluoromethane
III
III
II
I-c
III
sec-Butyl acetate
tert-Butyl acetate
III
IV
III
III
III
III
III
III
III
II
IV
n-Butyl acrylate
II
III
III
I-c
III
III
III
III
III
I-b
I-b
IV
III
I-b
III
n-Butyl alcohol
sec-Butyl alcohol
tert-Butyl alcohol
tert-Butyl chromate (as CrO3)
n-Butyl glycidyl ether (BGE)
n-Butyl lactate
Butyl mercaptan
n-Butylamine
o-sec-Butylphenol
p-tert-Butyltoluene
I-c
Carbon black
I-b
I-a
I-a
III
I-b
I-b
IV
I-c
III
I-c
III
I-b
Carbon dioxide
Carbon disulfide
Carbon monoxide
Carbon tetrabromide
Carbon tetrachloride
Carbonyl fluoride
Catechol
Cellulose (paper fibres), Pt
Cesium hydroxide
Chlordane
Chlorinated camphene
Chlorinated diphenyl oxide
I-b
I-b
I-b
I-a
II
II
I-a
III
I-b
I-b
I-a
I-b
III
III
I-c
III
I-b
I-b
I-b
I-c
I-c
I-c
I-b
I-b
I-b
III
III
IV
IV
III
I-c
IV
IV
IV
IV
IV
IV
I-c
I-b
IV
IV
III
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Chlorine
Chlorine dioxide
Chlorine trifluoride
Chloroacetaldehyde
Chloroacetone
alpha-Chloroacetophenone
Chloroacetyl chloride
Chlorobenzene
o-Chlorobenzylidene malononitrile
Chlorobromomethane
Chlorodifluoromethane
Chlorodiphenyl (42% chlorine)
Chlorodiphenyl (54% chlorine)
Chloroform
Chloromethyl methyl ether
bis (Chloromethyl) ether
1-Chloro-1-nitropropane
Chloropentafluoroethane
Chloropicrin
-Chloroprene
3-Chloropropene
2-chloropropionic acid
o-Chlorostyrene
o-Chlorotoluene
Chlorpyrifos
Chromite ore processing (chromate) (as Cr)
Chromium (metal)
Chromium (III) compounds (as Cr)
Chromium IV, water insoluble inorganic compounds (as Cr)
Chromium IV, water soluble inorganic compounds (as Cr)
Chromyl chloride
Chrysene
Clopidol
Coal dust (less than 5% crystalline
silica), Pr
Coal dust (more than 5% crystalline silica), Pr
Coal tar pitch volatiles, as benzene
solubles
Cobalt, elemental and inorganic
compounds (as Co)
Cobalt hydrocarbonyl (as Co)
Cobalt tetracarbonyl (as Co)
Copper [7440-50-8], Fume (as Cu)
Copper [7440-50-8], Dust and
mists (as Cu)
Corundum, Pt
Cotton dust, cotton waste processing operation of waste recycling
and garnetting
I-c
II
I-a
I-a
I-a
I-b
I-b
IV
I-a
III
I-c
III
III
IV
III
III
II
I-c
II
IV
III
III
IV
I-b
IV
III
III
III
Di-sec-octyl phthalate
III
Diacetone alcohol
III
1,6-Diaminohexane
III
III
I-c
III
2,6-Di-tert-butyl-p-cresol
Diazinon
Diazomethane
Diborane
1,2-Dibromoethane
Dibutyl phenyl phosphate
III
Dibutyl phosphate
III
Dibutyl phthalate
III
II
II
II
I-b
I-c
III
2-N-Dibutylaminoethanol
1,3-Dichloro -5,5-dimethyl hydantoin
Dichloroacetylene
o-Dichlorobenzene
p-Dichlorobenzene
3,3'-Dichlorobenzidine
1,4-Dichloro-2-butene
Dichlorodifluoromethane
1,1-Dichloroethane
III
1,2-Dichloroethane
III
1,1-Dichloroethylene
III
Dichlorofluoromethane
I-b
I-b
IV
II
I-b
I-a
I-b
I-a
I-b
IV
III
I-b
I-b
III
I-b
IV
I-c
III
IV
IV
IV
III
I-c
I-b
I-b
IV
IV
IV
III
IV
I-b
I-b
III
I-b
I-a
I-a
III
III
III
I-c
IV
Dichloroethyl ether
1,2-Dichloroethylene
1,1-Dichloro-1-nitroethane
1,2-Dichloropropane
Dichloropropene (cis and trans)
2,2-Dichloropropionic acid
1,2 Dichloro-1,1,2,2tetrafluoroethane
Dichlorvos
Dicrotophos
Dicyclopentadiene
Dicyclopentadienyl iron
Dieldrin
Diethanolamine
Diethyl ether
Diethyl ketone
Diethyl phthalate
Diethylamine
2-Diethylaminoethanol
Diethylene triamine
Difluorodibromomethane
Diglycidyl ether (DGE)
Diisobutyl ketone
Diisopropyl ether
Diisopropylamine
Dimethyl carbamoyl chloride
Dimethyl sulfate
N,N-Dimethylacetamide
Dimethylamine
N,N-Dimethylaniline
N,N-Dimethylformamide
1,1-Dimethylhydrazine
Dimethylphthalate
Dinitolmide
Dinitro-ortho-cresol
Dinitrobenzene (all isomers)
Dinitrotoluene
Dioxane
Dioxathion
Diphenylamine
Dipropylene glycol monomethyl
ether
Diquat, Pt
Diquat, Pr
Disulfiram
13
III
II
III
IV
IV
II
IV
IV
I-b
I-c
IV
IV
III
I-c
IV
I-b
I-b
II
III
I-b
I-b
III
IV
III
I-b
I-b
I-b
III
III
IV
I-b
IV
III
III
I-b
III
III
IV
IV
III
III
IV
II
III
III
II
14
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
Disulfoton
Diuron
Divinyl benzene
Emery, Pt
Endosulfan
Endrin
Enflurane
Epichlorohydrin
EPN
Ethane
Ethion
2-Ethoxyethanol (EGEE)
2-Ethoxyethyl acetate (EGEEA)
Ethyl acetate
Ethyl acrylate
Ethyl alcohol
Ethyl amyl ketone
Ethyl benzene
Ethyl bromide
Ethyl butyl ketone
Ethyl chloride
Ethyl formate
Ethyl mercaptan
Ethyl silicate
Ethylamine
Ethylene
Ethylene chlorohydrin
Ethylene glycol (vapour and mist)
Ethylene glycol dinitrate
Ethylene imine
Ethylene oxide
Ethylenediamine
Ethylidene norbornene
N-Ethylmorpholine
Fenamiphos
Fensulfothion
Fenthion
Ferbam
Ferrovanadium (dust)
Fibres, Artificial Vitreous Mineral
Fibres, Fibrous glass, continuous
filament, Pt
Fibres, Artificial Vitreous Mineral
Fibres, Fibrous glass, microfibres
Fibres, Artificial Vitreous Mineral
Fibres, Insulation wool fibres,
Glass wool
Fibres, Artificial Vitreous Mineral
Fibres, Insulation wool fibres, Rock
wool
Fibres, Artificial Vitreous Mineral
Fibres, Insulation wool fibres, Slag
IV
I-c
I-b
I-c
IV
II
II
IV
IV
I-c
IV
IV
IV
I-b
III
I-b
I-b
III
IV
II
IV
I-b
I-b
III
I-b
I-c
I-a
I-a
I-a
IV
III
III
I-a
II
IV
IV
IV
I-b
I-b
wool
sec-Hexyl acetate
Hexylene glycol
I-c
Hexachlorocyclopentadiene
Fluorine
Fonofos
Formaldehyde
Formamide
Formic acid
Furfural
Furfuryl alcohol
Gasoline
Germanium tetrahydride
Glutaraldehyde
Glycerin (mist)
Glycidol
Grain dust (oat, wheat, barley), Pt
Graphite (all forms except fibers),
Pr
Gypsum, Pt
Gypsum, Pr
Hafnium
Halothane
Helium
Heptachlor
Heptachlore epoxide
n-Heptane
Hexachlorobenzene
Hexachlorobutadiene
Hexachloroethane
III
I-b
Hexachloronaphthalene
Hexafluoroacetone
Hexamethyl phosphoramide
I-b
Hexamethylene diisocyanate
I-b
n-Hexane
III
III
I-a
Hydrazine
Hydrogen
Hydrogen bromide
Hydrogen chloride
I-b
Hydrogen cyanide
I-b
III
III
III
I-c
III
I-b
IV
I-a
III
I-b
I-b
I-b
II
II
I-a
I-c
I-b
IV
III
I-c
I-c
III
IV
I-c
IV
III
II
III
III
IV
III
III
IV
III
III
IV
I-c
Hydrogen peroxide
Hydrogen selenide (as Se)
Hydrogen sulfide
Hydrogenated terphenyls
Hydroquinone
2-Hydroxypropyl acrylate
Indene
Indium [7440-74-6] and compounds (as In)
Iodine
Iodoform
Iron pentacarbonyl (as Fe)
Iron salts, soluble (as Fe)
Iron trioxide, dust and fume (as Fe)
Isoamyl alcohol
Isobutyl acetate
Isobutyl alcohol
Isocyanate oligomers
Isooctyl alcohol
Isophorone
Isophorone diisocyanate
Isopropoxyethanol
Isopropyl acetate
Isopropyl alcohol
Isopropyl glycidyl ether (IGE)
Isopropylamine
N-Isopropylaniline
Kaolin, Pr
Ketene
L.P.G. (Liquified petroleum gas)
Lead and inorganic compounds
Lead arsenate (as Pb3(AsO4)2)
Lead chromate (as Cr)
Lead tetraethyl (as Pb)
Lead tetramethyl (as Pb)
Limestone, Pt
Lindane
Lithium hydride
Magnesite, Pt
Magnesium oxide fume (as Mg)
I-b
I-a
III
I-c
I-a
I-a
I-a
I-a
I-b
IV
I-c
III
IV
I-b
I-b
IV
I-a
II
II
I-b
III
II
I-b
I-b
III
II
I-a
III
III
I-b
II
III
I-b
II
III
II
I-c
III
IV
III
III
III
I-c
IV
I-b
I-c
II
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Malathion
Maleic anhydride
Manganese [7439-96-5] (as Mn),
Dust and compounds
Manganese (as Mn), Fume
Manganese cyclopentadienyl tricarbonyl (as Mn)
Manganese methyl cyclopentadienyl tricarbonyl (as Mn)
Manganese tetroxide
Mercury [7439-97-6], Alkyl compounds (as Hg)
Mercury [7439-97-6], aryl compounds (as Hg)
Mercury [7439-97-6], inorganic
compounds (as Hg)
Mercury [7439-97-6], mecury vapor (as Hg)
Mesityl oxide
Methacrylic acid
Methane
Methomyl
Methoxychlor
2-Methoxyethanol (EGME)
2-Methoxyethyl acetate (EGMEA)
4-Methoxyphenol
Methyl acetate
Methyl acetylene
Methyl acetylene-propadiene mixture (MAPP)
Methyl acrylate
Methyl alcohol
Methyl amyl alcohol
Methyl n-amyl ketone
Methyl bromide
Methyl tert-butyl ether
Methyl n-butyl ketone
Methyl chloride
Methyl chloroform
Methyl 2-cyanoacrylate
Methyl demeton
Methyl ethyl ketone (MEK)
Methyl ethyl ketone peroxide
Methyl formate
Methyl hydrazine
Methyl iodide
Methyl isoamyl ketone
Methyl isobutyl ketone
Methyl isocyanate
Methyl isopropyl ketone
Methyl mercaptan
Methyl methacrylate (monomer)
IV
IV
Methyl parathion
III
Methyl silicate
IV
IV
IV
Methylamine
III
N-Methylaniline
IV
Methylcyclohexane
III
Methylcyclohexanol
o-Methylcyclohexanone
III
Methylene chloride
III
I-b
I-b
I-c
IV
IV
IV
IV
I-b
II
I-c
IV
II
II
II
IV
I-b
I-b
IV
I-b
III
I-b
IV
Nitroglycerin (NG)
IV
Oxygen difluoride
III
III
III
II
III
III
I-c
Nitromethane
1-Nitropropane
2-Nitropropane
N-Nitrosodimethylamine
Nitrotoluene (all isomers)
Nitrous oxide
Nonane
Octachloronaphthalene
Octane
Osmium tetroxide (as Os)
Oxalic acid
Ozone
Paraffin wax, fume
III
I-c
Pentachloronaphthalene
Pentachloronitrobenzene
Pentachlorophenol
IV
I-b
IV
I-b
III
I-c
III
Pentaerythritol
III
3-Pentyl actetate
II
Perchloryl fluoride
III
Perfluoroisobutylene
II
I-c
II
IV
IV
IV
III
I-b
I-c
IV
II
II
Perlite, Pt
Morpholine
III
IV
I-b
I-b
IV
IV
III
IV
II
III
IV
I-b
I-a
I-b
I-a
IV
I-b
I-b
III
I-b
I-b
I-b
Naled
Naphthalene
-Naphthylamine
Neon
Nickel, Metal
Nitrapyrin
Nitric acid
p-Nitroaniline
Nitrobenzene
p-Nitrochlorobenzene
4-Nitrodiphenyl
Nitroethane
Nitrogen
Nitrogen dioxide
Nitrogen monoxide
Nitrogen trifluoride
III
I-a
IV
III
III
III
II
III
II
III
II
I-b
I-b
I-a
I-a
I-b
I-c
I-c
15
n-Pentane
n-Amyl acetate
sec-Amyl acetate
tert-Amyl acetate
Isoamyl acetate
2-Methyl-1-butyl acetate
Perchloroethylene
Perchloromethyl mercaptan
Perlite, Pr
Phenol
Phenothiazine
Phenyl ether, vapour
Phenyl glycidyl ether (PGE)
Phenyl mercaptan
meta-Phenylenediamine
ortho-Phenylenediamine
p-Phenylenediamine
Phenylhydrazine
n-Phenyl--naphthylamine
IV
II
III
III
III
I-c
II
I-b
I-b
I-b
I-b
I-b
I-b
IV
II
IV
I-a
I-c
I-c
IV
III
I-b
III
I-b
III
III
III
III
III
16
Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition IRSST
Phenylphosphine
Phorate
Phosdrin
Phosgene
Phosphine
Phosphoric acid
Phosphorus (yellow)
Phosphorus oxychloride
Phosphorus pentachloride
Phosphorus pentasulfide
Phosphorus trichloride
Phthalic anhydride
m-Phthalodinitrile
Picloram
Picric acid
Pindone
Piperazine dihydrochloride
Plaster of Paris, Pt
Plaster of Paris, Pr
Platinum, Metal
Platinum [7440-06-4], Soluble salts
(as Pt)
Polytetrafluoroethylene decomposition products
Portland cement, Pt
Portland cement, Pr
Potassium hydroxide
Propane
Propane sultone
Propargyl alcohol
-Propiolactone
Propionic acid
Propoxur (baygon)
n-Propyl acetate
n-Propyl alcohol
n-Propyl nitrate
Propylene
Propylene glycol dinitrate
Propylene glycol monomethyl
ether
Propylene imine
Propylene oxide
Pyrethrum
Pyridine
Resorcinol
Rhodium [7440-16-6], Metal and
insoluble compounds (as Rh)
Rhodium [7440-16-6], Soluble
compounds (as Rh)
Ronnel
Rosin core solder pyrolysis products (as Formaldehyde)
I-a
IV
IV
II
II
I-b
I-b
I-b
I-b
I-b
I-b
III
I-c
I-c
III
III
III
I-c
I-c
III
III
II
I-b
I-b
I-a
I-c
III
I-b
III
I-b
IV
I-b
I-b
II
I-c
IV
Sulfur pentafluoride
Rotenone
IV
I-c
II
IV
IV
III
Sulfur tetrafluoride
I-c
Rouge, Pt
Rubber solvent (Naphtha)
Selenium and compounds (as Se)
Selenium hexafluoride (as Se)
Sesone
Silica, Amorphous, Diatomaceous
earth (uncalcined), Pt
Silica - Amorphous, fumes, Pr
Silica, Amorphous, fused, Pr
Silica, Amorphous, gel, Pr
Silica, Amorphous, precipitated,
Pt
Silica, Crystalline, Cristobalite, Pr
Silica, Crystalline, Quartz, Pr
Silica, Crystalline, Tridymite, Pr
Silica, Crystalline, Tripoli, Pr
Silicon, Pt
Silicon carbide (non fibrous), Pt
Silicon tetrahydride
Silver, Metal
Silver [7440-22-4], Soluble compounds (as Ag)
Soapstone, Pt
Soapstone, Pr
Sodium azide
Sodium bisulfite
Sodium fluoroacetate
Sodium hydroxide
Sodium metabisulfite
Borates, tetra, sodium salt , Anhydrous
Borates, tetra, sodium salt , Decahydrate
Borates, tetra, sodium salt , Pentahydrate
Starch, Pt
Stibine (as Sb)
Stoddard solvent
Strontium chromate (as Cr)
IV
Strychnine
III
III
III
III
II
Styrene (monomer)
III
Sulfotep
III
Sulfur dioxide
IV
III
Sulfur hexafluoride
Sulfur monochloride
III
III
I-c
I-c
III
III
III
III
I-c
I-c
II
III
Sulfuric acid
Sulfuryl fluoride
Sulprofos
2,4,5-T
Talc, fibrous
Tantalum [7440-25-7], metal and
oxide dusts (as Ta)
Tellurium and compounds (as Te)
Tellurium hexafluoride (as Te)
Temephos
TEPP
Terephthalic acid
Terphenyls
1,1,2,2-Tetrabromoethane
1,1,1,2-Tetrachloro-2,2difluoroethane
1,1,2,2-Tetrachloro-1, 2difluoroethane
1,1,2,2-Tetrachloroethane
Tetrachloronaphthalene
III
Tetrahydrofuran
III
III
I-a
I-b
II
I-a
I-b
Tetramethyl succinonitrile
I-b
Thionyl chloride
I-b
Thiram
I-b
III
IV
IV
III
II
IV
I-c
I-b
I-c
III
IV
I-b
I-c
I-a
Tetranitromethane
Tetrasodium pyrophosphate
Tetryl
Thallium, elemental [7440-28-0],
and soluble compounds (as Tl)
4,4'-Thiobis (6-tert-butyl-m-cresol)
Thioglycolic acid
Tin, Metal
Tin [7440-31-5], Organic compounds (as Sn)
Tin [7440-31-5], Oxide and inorganic compounds, except SnH4
(as Sn)
Titanium dioxide, Pt
o-Tolidine
Toluene
Toluene diisocyanate (TDI) (isomers mixture)
o-Toluidine
m-Toluidine
p-Toluidine
Tributyl phosphate
Trichloroacetic acid
1,2,4-Trichlorobenzene
1,1,2-Trichloroethane
I-a
I-a
I-b
III
IV
I-c
III
III
I-c
IV
II
IV
IV
I-c
I-a
IV
IV
IV
IV
III
I-b
II
IV
I-b
III
III
I-c
I-b
I-a
III
III
III
III
I-c
III
IV
III
IV
II
IV
I-b
I-b
I-b
IV
IRSST - Guide for the adjustment of permissible exposure values (PEVs) for unusual work schedules, 3rd edition
Trichloroethylene
Trichlorofluoromethane
Trichloronaphthalene
1,2,3-Trichloropropane
1,1,2-Trichloro-1,2,2trifluoroethane
Tri-o-cresyl phosphate
Triethanolamine
Triethylamine
Triglycidyl isocyanurate (TGIC)
(alpha-)
Triglycidyl isocyanurate (TGIC)
(beta)
Triglycidyl isocyanurate (TGIC)
(mixed isomers)
Trimellitic anhydride
Trimethyl benzene
Trimethyl phosphite
Trimethylamine
2,4,6-Trinitrotoluene (TNT)
Triphenyl amine
Triphenyl phosphate
Tungsten [7440-33-7] (as W) , Insoluble compounds
Tungsten [7440-33-7] (as W) , Soluble compounds
Turpentine
Uranium [7440-61-1] (natural) , Insoluble compounds (as U)
Uranium (natural) [7440-61-1], Soluble compounds (as U)
n-Valeraldehyde
Vanadium pentoxide, fume and
respirable dust (as V2O5)
Vegetable oil mists (except castor,
cashew and other similar irritant
oils)
Vinyl acetate
Vinyl bromide
Vinyl chloride (monomer)
Vinyl cyclohexene dioxide
Vinyl toluene
VM&P Naphtha
Warfarin
Welding fumes (not otherwise
classified)
Wood dust (western red cedar), Pt
Wood dust hard and soft, except
red cedar, Pt
Xylene (o-,m-,p- isomers)
m-Xylene-alpha, alpha'-diamine
Xylidine (mixed isomers)
II
I-a
III
III
II
III
III
IV
III
III
III
III
III
I-b
I-b
III
I-c
IV
I-c
II
I-b
III
III
I-b
I-b
I-c
I-b
III
III
III
I-b
I-b
IV
II
III
III
II
I-a
III
III
III
II
Zinc stearate
Zinc, oxide, Fume
I-c
I-c
II
I-c
17