Professional Documents
Culture Documents
80 3689 01 Threaded Connections
80 3689 01 Threaded Connections
MOLYKOTE
LUBRICANTS
Harsh environments, heavy loads and extreme speeds can challenge your
productivity. Molykote brand Anti-Seize Pastes and Anti-Friction Coatings
(AFCs) help keep your equipment and processes moving smoothly.
IMPROVE PERFORMANCE
OF THREADED CONNECTIONS
BY PREVENTING:
Inconsistent coefficients of friction, resulting in inconsistent
bolt tension
Stick-slip
Stress corrosion cracking
Fretting
Galling
Seizing
Molykote brand lubricants can help your threaded connections
perform well in service, from initial assembly through repeated
disassemblies. They are specially formulated to withstand harsh
conditions, perform in a wide range of service temperatures and
resist the effects of heavy loads, salt-spray or other contaminants.
THE BENEFITS
OF PROPER LUBRICATION
K*
0.094
0.087
0.18
0.12
0.06
0.16
0.10
0.13
0.08
0.19
*All values in this table were calculated by using the K-Factor formula.
0.12
0.15
0.16
0.14
0.10
0.11
0.06
0.12
0.09
0.08
0.08
0.10
0.11
0.15
0.24
0.21
0.21
0.18
0.17
0.22
Failure Mechanisms
Defined
Torque
Proper bolt torque is required to achieve appropriate bolt
tension and elongation. Torque must overcome all sources
of friction before elongation can occur. Thread and bolthead friction can be reduced and made consistent by
adding a lubricant.
crest
pitch
minor dia.
thread angle
K=
(0.5dp)(tan + t sec )
(1 - t tan sec )
Where
D = nominal bolt shank diameter
= thread half-angle = 60/2 = 30
= thread helix angle = tan-1 (p/dp)
dp = bolt pitch diameter
t = coefficient of thread friction
c = coefficient of collar (head) friction
depth
K-FACTOR FORMULA
{[
major dia.
root
pitch dia.
+[0.625c ]
Galling
During sliding contact, the oxide layer of
threaded materials peels away. Asperities
transfer from one part to the other, then
break away, destroying the surface and
preventing disassembly.
Seizing
Caused by fretting, oxide-free surfaces
cold weld under extreme pressure,
preventing disassembly.
LUBRICANTS ARE
NOT
CREATED
EQUAL
DIFFERENT BY DESIGN
Graphite
Anti-Seize Pastes
Molykote brand Anti-Seize Pastes are highperformance products specially formulated for
harsh conditions. Unlike conventional greases or
compounds, Molykote Anti-Seize Pastes create
and maintain a lubricating layer, despite extreme
loads and temperatures.
Molykote pastes provide:
Wear protection
Reliable performance across wide
temperature ranges
Consistent coefficient of friction ()
Water washout resistance
Corrosion protection
Immediate lubrication once applied
Long-term lubrication
Easy, quick and accurate application of Anti-Seize
Pastes can be achieved by brushing or dispensed
pumping. Some Anti-Seize Pastes are also available
in spray form.
Anti-Friction Coatings
Molykote brand Anti-Friction Coatings are very
useful for parts exposed to dusty environments or
inaccessible areas where long-term lubrication is
desired. The parts can be pre-lubricated in a clean
environment to reduce handling during field
assembly operations.
Molykote brand AFCs are formulated to offer
these benefits after curing:
Dry lubrication
Coating that is nonflammable
Is dry lubrication
needed?
YES, my application is
exposed to dust, dirt and
debris and would benefit
from dry lubrication.
Choose Molykote brand
Anti-Friction Coatings.
NO:
Choose Molykote brand
Anti-Seize Pastes.
NO:
Consider Molykote
Anti-Seize Pastes.
SELECT
PRODUCT NAME
KEY FEATURES
TEMPERATURE
RANGE C
(F)
Stro
ng
Cap Adhes
i on
abi l i t
y
M e ta
lCom Free
pos i t
ion Galling
Prevention
Gallin
g Pre
ventio
n
Fretting
Frett Corrosion
ing C
Protection
or
Prote
ction rosion
Water
Wate Resistance
r Res
istan
ce
High
HHigighhLoading
LLooaaCapability
Carrying
d
CCaarrry ding
yininggC
Caappaa
bbililitto
Suitable
ityy
Suita for Low
b
le
Moderate
r Low
Mode foLoads
to
rate L
oads
Using Anti-Seize Pastes is one of the best ways to reduce and control friction in threaded
connections, ensuring long-term performance and easy disassembly and reassembly. To determine
the appropriate Anti-Seize Paste, consider the load, environment, temperature and speed of your
application. Below is a general description of Molykote Anti-Seize Pastes that Dow Corning
identifies as best suited for threaded connections.
SOLID
LUBRICANTS
-28 to 204
(-18 to 399)
MoS2,
white solids
MOLYKOTE G-n
PLUS PASTE
Copper-free
Up to 204
(Up to 399)
MoS2, graphite,
white solids
MOLYKOTE G-RAPID
PLUS PASTE/SPRAY
-37 to 232
(-35 to 450)
MoS2, graphite,
white solids
-34 to 343
(-30 to 650)
Copper and
graphite,
white solids
-43 to 232
(-45 to 450)
MoS2
High purity
Suitable for stainless, austenite and high
nickel chromium steel
Prevents stress corrosion cracking and
solder embrittlement
Up to 782
(Up to 1440)
Zirconium dioxide
Metal-free
Suitable for water contact
-40 to 649
(-40 to 1200)
-40 to 200
(-40 to 392)
MOLYKOTE
P-1900 PASTE
-30 to 300
(-22 to 575)
White solids
Up to 188
(Up to 370)
anc e
Corro
s
Frett
ing
Corro
s
ion R
esist
ion
anc e
O il R
es i s t
anc e
Fuel
&
i c al R
es i s t
Carr
yi
Chem
SOLID
LUBRICANT/
BINDER
oad
TEMPERATURE
RANGE C
(F)
KEY
FEATURES
High
L
PRODUCT NAME
ng
Using an AFC is one of the best ways to reduce and control friction in threaded connections,
ensure long-term performance, and easy disassembly and reassembly. To determine the
appropriate AFC, remember to consider service requirements, the desired coating method
and the specific advantages for different applications. Below are general descriptions of
Molykote AFCs that Dow Corning identifies as best suited for threaded connections.
MOLYKOTE 3402-C
LEAD FREE ANTIFRICTION COATING
-200 to 310
(-328 to 590)
Solids: MoS2
Binder: proprietary
MOLYKOTE D-708
ANTI-FRICTION
COATING
Heat curing
Black glossy finish
-64 to 240
(-84 to 464)
Solids: PTFE
Binder: epoxy
MOLYKOTE D-7409
ANTI-FRICTION
COATING
Heat curing
Suitable for high
temperatures
-70 to 300
(-94 to 572)
Solids: MoS2
Binder:
polyamide-imide
Heat curing
Excellent adhesion
-200 to 260
(-328 to 500)
Solids: MoS2
Binder: epoxy
MOLYKOTE D-321 R
ANTI-FRICTION
COATING
-180 to 450
(-292 to 842)
Solids: MoS2,
graphite
Binder: titanate
MOLYKOTE 106
ANTI-FRICTION
COATING
Heat curing
Easy to apply
-240 to 370
(-400 to 698)
Solids: MoS2
Binder: epoxy
MOLYKOTE 3400A
ANTI-FRICTION
COATING LEAD FREE
molykote.com
Learn More
Molykote lubricants are available through a distributor
network of more than 3,000 distributors worldwide.
And, Dow Corning has Lubricant Expertise Centers
strategically located globally to provide you with
expert technical service and support.
In addition to Molykote Anti-Seize Pastes and Anti-Friction
Coatings, our other Smart Lubrication solutions include
multipurpose oils, synthetic and ultra-high-purity
mineral oil fluids, specialty compounds, greases and
more. Learn more now about our extensive product
and service offering by visiting molykote.com or email
[email protected].
Images: Page 1, AV18647; Page 2, AV19522; Page 3, AV19512, AV19520, AV17005; Page 4, AV19519, AV19516;
Page 5, AV19513; Page 6, AV19514, AV19524; Page 8, AV19521; Page 10, AV19523; Page 11, AV19515