Bobcat Manual
Bobcat Manual
Bobcat Manual
OPERATING INSTRUCTIONS
Contents
Controls and indicators ...................................................................................................................................................21
Multi-function dial ..................................................................................................................................................22
Right console ........................................................................................................................................................24
Left multi-function lever.........................................................................................................................................27
Right multi-function lever ......................................................................................................................................27
Boom function control joystick ..............................................................................................................................28
Controls for hazard warning lights and rotating beacon........................................................................................28
Longitudinal stability indicator ...............................................................................................................................29
Control for the cant correction (CDL) device.........................................................................................................30
Transversal inclinometer.......................................................................................................................................30
CDL middle position indicator ...............................................................................................................................30
Ignition Switch.......................................................................................................................................................31
Steering wheel ......................................................................................................................................................31
Steering wheel tilt adjustment ...............................................................................................................................31
Pedals ...................................................................................................................................................................32
Handbrake ............................................................................................................................................................32
Reservoir for windscreen washer liquid ................................................................................................................32
Cab heating and defogging control .......................................................................................................................33
Hydraulic system...................................................................................................................................................33
Batch of data sheets .............................................................................................................................................33
Rear window .........................................................................................................................................................33
Fire Extinguisher Location ....................................................................................................................................33
Door ......................................................................................................................................................................34
Left window ...........................................................................................................................................................34
Circuit breaker.......................................................................................................................................................35
Daily Inspection...............................................................................................................................................................35
Preparation Before Operation .........................................................................................................................................36
Operation and Maintenance Manual.....................................................................................................................36
Tanking on diesel fuel ...........................................................................................................................................36
Adjusting the seat .................................................................................................................................................36
Driving the machine ........................................................................................................................................................37
Starting..................................................................................................................................................................37
Driving...................................................................................................................................................................37
Stopping................................................................................................................................................................37
4900056-EN (01-06)
19
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Handling loads................................................................................................................................................................ 38
Longitudinal stability indicator .............................................................................................................................. 38
Load charts .......................................................................................................................................................... 38
Picking up a load from the ground ....................................................................................................................... 39
Placing a load on the ground ............................................................................................................................... 39
Picking up a raised load ....................................................................................................................................... 40
Placing a raised load............................................................................................................................................ 41
Recovery and transport of the machine ......................................................................................................................... 42
Towing the machine ............................................................................................................................................. 42
Hoisting the machine............................................................................................................................................ 43
Securing the machine .......................................................................................................................................... 44
Driving on public roads................................................................................................................................................... 46
Warning................................................................................................................................................................ 46
Driving in some countries..................................................................................................................................... 46
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
20
4900056-EN (01-06)
OPERATING INSTRUCTIONS
12
5 4 3 2 1 0 1 2 3 4 5
30
20
10
0
10 2
30
14
9
7 10
15
20
10
25
30
11
RPM x 100
electronics
6
8
13
17
5
15
Reference
16
Designation
S0416
See
p. 28
Multi-function dial
p. 22
p. 29
Right console
p. 24
p. 30
Ignition Switch
p. 31
p. 88
p. 33
p. 27
10
p. 27
11
p. 28
12
Steering wheel
p. 31
13
p. 31
14
Transversal inclinometer
p. 30
15
p. 32
16
Accelerator pedal
p. 32
17
Handbrake
p. 32
4900056-EN (01-06)
21
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Multi-function dial
The multi-function dial comprises 16 lights and 5 indicators. The indicator lights are only visible when they are on.
The indicators are lit when the side-lights are on.
Figure 2
12 13 14 15
11
10
16
18
19
20
17
7
6
21
0000000
1
S0306
Reference
Icon
Description
Function
Fuel gauge
RPM counter
Hour meter
10
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
22
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Reference
Icon
Description
Function
11
12
13
14
Not used
15
Not used
16
17
18
19
20
21
4900056-EN (01-06)
23
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Right console
Figure 3
10
13
17
12
11
14
18
16
15
19
20
S0417
Reference
1
Icon
Description
Trailer turn indicator
Function
The lower green light flashes when the trailer's turn indicators are activated.
The upper red indicator light is not used on this model.
Steering mode
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
24
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Reference
Icon
Description
Function
Headlamps
Push the switch to reverse the airflow through the radiator for cleaning purposes.
10
11
Rear hydraulic connection (option) 2-position toggle switch with stable central position:
down position: activates a constant flow to the rear hydraulic connector.
central position: deactivates a constant flow to the rear hydraulic connector.
up position: activates a constant flow in the opposite direction to the rear hydraulic
connector.
12
13
Transmission mode
14
4900056-EN (01-06)
25
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Reference
Icon
Description
Function
15
16
17
18
19
20
Not used.
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
26
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Figure 4
horn control.
Figure 5
S0308
S0309
Travel Direction
Windscreen wiper
stop,
slow sweep,
WARNING
fast sweep.
Windscreen washer
Travel Speed
Lights
When the lighting switch is off, pull the lever towards you
to flash the headlamps.
Road horn
IMPORTANT
It is possible to change from one speed to another without stopping the machine.
4900056-EN (01-06)
Press the button at the end of the lever to sound the horn.
27
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Figure 7
9
1
5 7
4
3
6 8
2
1
10
2
S0316
S0418
Reference
Icon
Description
Function
Joystick pushed
forwards
Joystick pulled
backwards
10
Switch to activate/
deactivate the second
hydraulic function at
the front of the boom
head (option)
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
28
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Reference
Figure 8
S0301
WARNING
Icon
Reference
Icon
4900056-EN (01-06)
29
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Transversal inclinometer
The lateral inclinometer is installed in the upper right corner of the cab. It indicates the angle of tilt (in degrees) of
the chassis with reference to the horizontal.
Figure 9
Figure 10
1
2
5 4 3 2 1 0 1 2 3 4 5
S0303
30
20
Reference
Icon
10
0
10 2
30
Function
Cant correction device control
The control returns to neutral when
released.
pushed towards the right (1):
correction of cant towards the right at a
proportional speed.
pushed towards the left (2): correction
of cant towards the left at a
proportional speed.
S0313
Reference
Description
Function
Fine scale
Large scale
WARNING
When carrying out handling work, carefully monitor this inclinometer and adopt the necessary measures.
WARNING
Do not use the CDL function when the load is
raised. Correct the cant before lifting the load.
Operate the control slowly and smoothly. Observe
the inclinometer to determine when the chassis is
level. Any movement or stopping of the chassis
that is too sudden could cause the boom to swing.
The risk of overturning is greater when the boom is
raised or deployed.
S1208
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
30
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Ignition Switch
Steering wheel
Turn the steering wheel clockwise to steer the machine to
the right.
Figure 12
STOP
RUN
PREHEAT
START
S0304
Position
Function
STOP
RUN
PREHEAT
START
S0312
IMPORTANT
WARNING
Never drive or operate the machine if the console is
not properly locked.
Never tilt the console when the machine is in
motion.
4900056-EN (01-06)
31
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Pedals
Handbrake
This lever has two functions:
Figure 14
handbrake control.
control of the emergency brake, in case of failure of the
service brake.
Figure 15
2
S0314
Ref.
1
Description
Brake pedal
Accelerator pedal
Function
This pedal fulfils the function of service brake:
Press the pedal to gradually slow down the
machine until it stops.
Release the pedal to gradually decrease
the brake action until it cancels out.
In the beginning, braking is hydrostatic.
When the diesel engine is in continuous
mode, the machine's travel speed is
reduced until it stops, in proportion to the
action on the pedal.
On the rest of the stroke, braking is
mechanical (with the brake discs).
S0315
S0503
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
32
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Figure 18
93732
S0307
Reference
1
Description
Temperature
adjustment
Fan control
Function
To increase temperature:
turn clockwise to increase the
temperature in the cab.
To decrease temperature:
turn counterclockwise to lower the
temperature in the cab.
Rear window
This window can open 90.
WARNING
This window can be used as an emergency exit; do
not block its opening control mechanism or limit its
features.
Hydraulic system
Fire Extinguisher Location
Attachment points for the fire extinguisher support device
are provided on the right hand side of the rear panel in the
cab.
WARNING
Diesel fuel or hydraulic fluid under pressure can
penetrate skin or eyes, causing serious injury or
death. Fluid leaks under pressure may not be visible. Use a piece of cardboard or wood to find leaks.
Do not use your bare hand. Wear safety goggles. If
fluid enters skin or eyes, get immediate medical
attention from a physician familiar with this injury.
Figure 19
WARNING
AVOID BURNS
Hydraulic fluid, tubes, fittings and quick couplers
can get hot when running machine and attachments. Be careful when connecting and disconnecting quick couplers.
4900056-EN (01-06)
S0432
33
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Door
Left window
Figure 20
S0381
S0374
Figure 21
Figure 23
S0382
S0360
S0361
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
34
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Circuit breaker
Daily Inspection
Figure 25
WARNING
If the telescopic handler is new, carry out the specific checks described in the Maintenance section
before using the machine for the first time.
S0433
To close the circuit: insert the key in the switch then turn
clockwise until indexing.
WARNING
WARNING
It is recommended to open the circuit when the
machine is stopped for a long period.
4900056-EN (01-06)
35
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
WARNING
Fasten your seat belt.
Figure 26
S0383
WARNING
Operator must have instructions before running
the machine. Untrained operators can cause injury
or death.
93715
Reference
Description
Adjusting the
length of the seat
Adjusting the
suspension
Adjusting the
height of the seat
Adjustment
S0505
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
36
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Starting
WARNING
When the operating temperatures are not stabilised, only increase the engine speed gradually.
Driving
Figure 29
STOP
RUN
PREHEAT
START
S0304
IMPORTANT
WARNING
WARNING
4900056-EN (01-06)
37
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
WARNING
13. Make sure all covers are properly closed and locked.
WARNING
WARNING
Never leave the machine when the engine is running or when the boom is not lowered so that the
forks or attachment are in contact with the ground.
Handling loads
Load charts
Always check the state of the longitudinal stability indicators during handling or lifting operations.
WARNING
WARNING
Always follow the load chart indications.
WARNING
The operator should perform periodic inspections
to check correct operation of the indicator lights.
WARNING
Never leave the machine when the engine is running or when the boom is not lowered so that the
forks or attachment are in contact with the ground.
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
38
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Figure 30
93748A
93746A
93748B
93746B
Figure 36
93748C
93746C
Figure 37
93748D
Figure 33
93746D
4900056-EN (01-06)
39
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Figure 40
WARNING
All boom movement or machine displacement
manoeuvres with a raised load must be carried out
with the greatest care and as slowly as possible.
93747C
Figure 38
93747A
WARNING
Make sure you leave the necessary distance to
slide the forks entirely under the load, between the
front of the machine and the pile of loads, using
only the minimum length of the telescopic boom.
93747D
93747B
WARNING
Do not knock against the load with the forks or the
stack with the machine.
40
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Figure 44
WARNING
All boom movement or machine displacement
manoeuvres with a raised load must be carried out
with the greatest care and as slowly as possible.
93749C
Figure 42
93749A
Figure 45
93749D
93749B
4900056-EN (01-06)
41
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Release the handbrake. This will open the hydraulic circuit. It is not possible to manually release the brakes
when the hydraulic circuit is closed.
At each end of the central part of the front axle are two
screws (see [Figure 67]). When screwed in, these
screws will remove the spring pressure that block the
brake disks.
[Figure 68] shows the function of such a screw inside
the axle.
The work will first be carried out on the two screws on
one side of the front axle then on the other side:
WARNING
It is impossible for oil to circulate in a hydrostatic transmission in a closed circuit when the machine is not running,
this operation involves making oil circulation possible:
IMPORTANT
When the transmission disengagement with valve
is installed, see p. 89.
S1394
Figure 48
Figure 46
S1395
S0441
IMPORTANT
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
42
4900056-EN (01-06)
OPERATING INSTRUCTIONS
WARNING
Before carrying out the hoisting operation, make
sure, that in relation to the machine mass and
dimensions:
WARNING
Towing
When towing:
Figure 49
1116 mm
7980 daN
Where this towing is to be carried out on public roads, comply with the Highway Code.
3780 daN
4200 daN
WARNING
The machine must be towed:
at a maximum speed of 5 km/h,
over very short distances so that it can be loaded
onto a trailer,
with means appropriate to its weight and size.
S1779
After towing
Figure 50
1320 mm
1034 mm
7660 daN
3360 daN
4300 daN
WARNING
Do not forget to carry out these two operations to
avoid any risk of accident that might be caused by
incorrect operation of the machine after its startup.
S1780
4900056-EN (01-06)
43
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
Figure 51
WARNING
Before loading the machine on the trailer, make
sure that:
All safety instructions for the trailer are complied
with.
The driver of the trailer has been informed of the
dimensions and weights of the machine.
The trailer platform is big enough and has sufficient capacity to transport the machine.
The admissible pressure on the trailer platform is
compatible with the machine.
S0439
S1781
S0493
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
44
4900056-EN (01-06)
OPERATING INSTRUCTIONS
Figure 54
Figure 57
S1782
S1211
S1227
S1210
4900056-EN (01-06)
45
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
OPERATING INSTRUCTIONS
WARNING
The transport of loads on public roads is prohibited. Attachments that can be fitted to the machine
must:
either be fitted with appropriate signs and safety
devices
or be removed from the machine
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
46
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
PREVENTIVE MAINTENANCE
Contents
Maintenance Safety ........................................................................................................................................................49
Maintenance interval .......................................................................................................................................................50
Operator Cab ..................................................................................................................................................................51
ROPS/FOPS Protection........................................................................................................................................51
Removing dust/replacing the cab filter..................................................................................................................51
Engine cover ...................................................................................................................................................................51
Air filter maintenance ......................................................................................................................................................52
Cleaning the air filters main cartridge...................................................................................................................52
Replacing the air filters main cartridge.................................................................................................................52
Replacing the air filters safety cartridge ...............................................................................................................52
Fuel system.....................................................................................................................................................................53
Fuel Specifications................................................................................................................................................53
Filling The Fuel Tank ............................................................................................................................................53
Replacing the fuel filter cartridge ..........................................................................................................................53
Lubrication circuit ............................................................................................................................................................54
Checking and topping up engine oil......................................................................................................................54
Oil Chart................................................................................................................................................................54
Draining and changing oil and filter.......................................................................................................................54
Engine Cooling System...................................................................................................................................................55
Checking the cooling fluid level.............................................................................................................................55
Checking the cooling fluid .....................................................................................................................................56
Adjusting The Alternator Belt ..........................................................................................................................................56
Electrical System.............................................................................................................................................................57
Description ............................................................................................................................................................57
Checking the battery fluid level .............................................................................................................................57
Checking the condition of fuses, diodes and relays..............................................................................................57
Checking the working order of controls, lighting and signalling ............................................................................57
Checking the condition of electric connections .....................................................................................................57
Fuses, diodes and relay drawing ..........................................................................................................................58
4900056-EN (01-06)
47
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
48
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Maintenance Safety
WARNING
Instructions are necessary before operating or servicing the machine. Read and understand the Operation & Maintenance Manual and
machine signs (decals). Follow warnings and instructions in this manual when making repairs, adjustments or servicing. Check for correct operation after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.
Incorrect
Incorrect
Disconnecting or loosening any hydraulic tubeline, hose, fitting, defective component or part can cause lift arms to
drop. Do not go under lift arms when
raised unless supported by an approved
lift arm support device. Replace if damaged.
Incorrect
Incorrect
Incorrect
Correct
Wear eye protection to guard from battery acid, compressed springs, fluids
under pressure and flying debris when
engines are running or tools are used.
Use eye protection approved for type of
welding.
Wear eye protection to guard from battery acid, compressed springs, fluids
under pressure and flying debris when
engines are running or tools are used.
Use eye protection approved for type of
welding.
Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator without any specific technical training. Maintenance procedures which are not in this manual must be performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL.
Always use genuine Bobcat replacement parts.
4900056-EN (01-06)
49
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Maintenance interval
Maintenance operations should be carried out according to the intervals defined in the table below.
WARNING
Depending on the working conditions under which you operate the machine, the recommended interval must be reduced in order to
keep the machine properly maintained and to prevent possible damage, malfunctions or accidents. These conditions are (non-exhaustive list) in particular: dusty environment, humid atmosphere, muddy environment, abrasive environment.
Operation
Page
Hours
10
50
200
500
800 (4)
1000 (5)
Diesel engine
Cleaning the air filters main cartridge (6)
Replacing the air filters main cartridge (6)
Replacing the air filters safety cartridge (6)
Checking the cooling fluid level
Checking the cooling fluid
Checking the radiators are clean
Checking the engine oil level
Draining and changing oil and filter of the engine
Replacing the lubricating oil filter cartridge
Checking the state and tension of the alternator belt (2)
Replacing the fuel filter cartridge (7)
p. 52
p. 52
p. 52
p. 55
p. 56
p. 54
p. 54
p. 55
p. 56
p. 53
Hydraulic system
p. 60
p. 60
p. 61
p. 61
p. 61
Mechanical transmission
p. 62
p. 62
p. 62
p. 62
p. 62
p. 62
p. 63
p. 63
p. 64
p. 64
p. 64
p. 65
p. 65
p. 65
monthly
monthly
monthly
Structure
Cleaning dust out of the cab filter
Replacing the cab filter
Lubricating the hinge pins
Lubricating the booms guide rail shoes
Checking the tightness of screws and bolts
Checking wear on the boom's guide rail shoes
Checking wear on flanges and hinge pins
p. 51
p. 51
p. 68
p. 68
Electrical system
p. 57
p. 57
p. 57
p. 57
p. 57
Check wheel nut torque every 8 hours for the first 24 hours.
First maintenance after 50 hours then according to the table.
Replace the first time after 100 hrs, then according to the table.
Or every 12 months.
Or every 12 months.
Frequency may vary in certain dusty environments.
To be replaced after 250 hours if the fuel filter bowl is badly fouled.
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
50
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Operator Cab
Engine cover
ROPS/FOPS Protection
The Bobcat telescopic handler has a ROPS/ FOPS operator cab as standard equipment to protect the operator from
rollover and falling objects. Check with your dealer if the
operator cab has been damaged.
Figure 2
WARNING
Never modify the operator cab by welding, grinding, drilling holes or adding attachments unless
instructed to do so by Bobcat. Changes to the cab
can cause loss of operator protection from rollover
and falling objects, and result in injury or death.
S1694
S0389
4900056-EN (01-06)
51
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
See Maintenance interval on page 50 for the correct frequency of maintenance work.
Figure 5
93761
IMPORTANT
1. Remove the cover from the air filter [Figure 81] and
take out the main cartridge.
Figure 4
S0444
IMPORTANT
The filter element is fragile. In the event of accidental
damage to the cartridge during this operation, it must be
replaced.
S0445
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
52
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Fuel system
WARNING
Fuel Specifications
No. 2
No. 1
100%
0%
50%
50%
0%
100%
S0446
4900056-EN (01-06)
53
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Lubrication circuit
Oil Chart
Figure 10
C
-40
-34
-29
-23
-18
-13
-7
-1
+4
+10
Figure 8
SAE 15W-40
SAE 30W
*SAE 5W-30
SAE 20W-20
SAE 10W
SYNTHETIC OIL: PLEASE FOLLOW THE MANUFACTURERS RECOMMENDATION
-40
-30
-20
-10
F
S0568
S0447
Figure 9
IMPORTANT
Use a good quality motor oil that meets the correct
API CD Service Classification or better (Oil Chart
on page 54).
S0506
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
54
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Check the cooling system every day to prevent overheating, loss of performance or engine damage.
WARNING
Do not start the engine without oil or let it run at
idle speed if the oil pressure indicator light does
not go out 5 seconds after starting.
IMPORTANT
The interval of this operation is made to coincide with
the draining and changing of the lubricating oil.
WARNING
Carry out this operation whilst draining the oil.
S0449
4900056-EN (01-06)
55
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
This tension is measured on the strand between the crankshaft and the alternator.
Figure 14
4.5 daN
WARNING
AVOID ENGINE DAMAGE
10 mm
S0430
Its correct value is 35.5 daN, i.e. a 10-mm deflection measured in the centre of the strand when a force of 4.5 daN is
applied to this point (the equivalent of a moderate effort
applied with the thumb).
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
56
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Electrical System
Description
The purpose of this operation is to keep the machine properly maintained and to prevent possible damage or
accidents. See Fuses, diodes and relay drawing on
page 58.
WARNING
Replace any faulty fuse, diode or relay immediately
even if the function that it protects does not seem
important. This applies even over and above the
recommended frequency.
Figure 15
Figure 16
MAX
MIN
S0386
93789
The two fuses and relay for engine preheating and starting
are located in the engine compartment, as indicated in the
lower part of [Figure 94].
The purpose of this operation is to keep the machine properly maintained and to prevent possible damage or
accidents.
IMPORTANT
WARNING
Replace or repair immediately any faulty component even if its function does not seem important. This applies even over and above the
recommended frequency.
WARNING
The battery contains acid.
4900056-EN (01-06)
57
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
E17
E16
E15
E18
F2
F3 1
F
E2
E1
S0401
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
58
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Relays
[Figure 94]
[Figure 94]
Reference
Gauge
Function protected
Reference
Function performed
15 A
15 A
10 A
Road horn
15 A
Headlamps
7.5 A
15 A
Full-beam
Headlamps
10 A
Cigarette lighter
Full-beam
7.5 A
Left side-lights
7.5 A
Right side-lights
10
7.5 A
10
Not used
11
DIODE 1 A
Parking brake
11
12
DIODE 1 A
12
13
10 A
13
14
15 A
14
Not used
15
7.5 A
15
16
3A
16
Stabilisers
17
7.5 A
17
18
10 A
18
19
7.5 A
19
20
15 A
Front wiper
20
Not used
21
7.5 A
21
Not used
22
7.5 A
Engine cutoff
23
7.5 A
Joystick supply
24
7.5 A
Direction indicators
25
10 A
26
E01
Glowplugs
E02
Starter control
E15
20 A
Heating fan
E16
27
7.5 A
Direction of travel
E17
28
7.5 A
E18
29
10 A
30
7.5 A
31
10 A
32
7.5 A
01
20 A
02
7.5 A
F01
50 A
F02
40 A
F03
70 A
Glow plugs
4900056-EN (01-06)
59
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Hydraulic/Hydrostatic System
Figure 19
IMPORTANT
Use only recommended fluid in the hydraulic/hydrostatic system.
S0542
WARNING
Be careful to keep impurities from getting into the
hydraulic/hydrostatic system.
Figure 18
MAX
MIN
WARNING
The oil level should not exceed the reference
marks.
S0454
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
60
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
See Maintenance interval on page 50 for the correct service interval for replacing the hydraulic filter.
WARNING
Figure 22
S0453
S0541
The purpose of this operation is to keep the machine properly maintained and to prevent possible damage or
accidents.
WARNING
WARNING
4900056-EN (01-06)
61
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Mechanical transmission
Figure 25
Dimensions
Pression
(bar)
DUNLOP
(standard)
4.00 bar
TITAN
(option)
400/70 - 20 150B
4.00 bar
WARNING
DUNLOP
(option)
4.25 bar
DUNLOP
(option)
405/70 - 20 SPT9
5.50 bar
BFGOODRICH
(option)
400/70 - 20
4.10 bar
S1213
S1212
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
62
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Figure 29
S1217
Figure 27
S1215
S1219
S1216
2. Unscrew the
[Figure 105].
level
plug
[Figure 104]
and
4900056-EN (01-06)
63
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Figure 31
Figure 33
S1218
S1221
Figure 34
S1222
S1220
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
S1217
64
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
Figure 36
Figure 38
S1226
S1224
S1223
4900056-EN (01-06)
65
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
Structure
Checking the tension of the telescoping chains
Figure 40
18 Nm
Figure 39
30 Nm
IMPORTANT
3
2
4
S0487
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
66
4900056-EN (01-06)
PREVENTIVE MAINTENANCE
10
11
L
S0581
WARNING
The measurement must be taken as shown in the
diagram, at the outside of the pins of the chain.
IMPORTANT
We recommend you contact your Bobcat dealer
when replacing chains, rollers and axes.
Each time you measure L, write down the date it is
checked and the number of hours on the machine.
4900056-EN (01-06)
67
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
PREVENTIVE MAINTENANCE
T3571L
S1784
Bobcat T35120SL/T35120L
Operation and Maintenance Manual
68
4900056-EN (01-06)