Tester Macrotest
Tester Macrotest
Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without prior notice.
MACROTEST5035_PS_v01
Created on 12/2/2005 2:24:38 PM
Prepared by Fung
Page 1of 6
Accessories
3-wire shuko cable (C2033)
Kit of 3 cables,4 crocodiles and 2 test lead (KITGE80)
Carrying case containing 4 cables banana-banana and 4 earth rods (KITTERRNE)
Software on CD-ROM (EUROLINK2000)
Serial cable (C2001 RS232)
Carrying bag (BORSA2050)
Calibration certificate ISO9000
Instruction manual
Optional accessories
Accessory for impedance measurement at high resolution.(IMP57)
Kit of strap and hooks to hang the instrument on the neck.(CN0050)
Standards
CE mark
Continuity test (EN 61557-4)
Insulation Resistance (EN 61557-2)
Earth resistance (EN 61557-5)
RCD test (EN 61557-6)
EMC Standards (EN 61326)
Safety of electrical devices equipment (EN 60204-1)
Type-tested assemblies TTA and partially type-tested assemblies PTTA (IEC 60439-1)
EN 61008
EN 61009
EN 61010-1
16th edition
HD 384
VDE 0413
Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without prior notice.
MACROTEST5035_PS_v01
Created on 12/2/2005 2:24:38 PM
Prepared by Fung
Page 2of 6
1. TECHNICAL SPECIFICATIONS
CONTINUITY TEST ON PROTECTIVE AND EQUALIZING CONDUCTORS
(modes: AUTO, RTimer+, RTimer-)
Range []
Resolution []
Accuracy*
0.01 - 19.99
0.01
(2% reading + 2 dgt)
20.0 - 99.9
0.1
* after cable calibration (which eliminates the cable resistance)
Test current > 200mA DC for R 5 (after calibration)
Current measurement resolution: 1mA
Open-circuit voltage: 4V Vo 24V
100
250
500
1000
Range [M]
Resolution [M]
0.01 -19.99
20.0 -49.9
50.0 -99.9
0.01 -19.99
20.0 -99.9
100.0 -199.9
0.01 -19.99
20.0 -199.9
200 -249
250 -499
0.01 -19.99
20.0 -199.9
200 -499
500 -999
0.01 -19.99
20.0 -199.9
200 -999
1000 -1999
0.01
0.1
0.1
0.01
0.1
0.1
0.01
0.1
1
1
0.01
0.1
1
1
0.01
0.1
1
1
Accuracy
(2% reading + 2 dgt) if V/R>1A
(5% reading + 2 dgt) if V/R1A
(2% reading + 2 dgt) if V/R>1A
(5% reading + 2 dgt) if V/R1A
(2% reading + 2 dgt) if V/R>1A
(5% reading + 2 dgt) if V/R1A
(2% reading + 2 dgt) if V/R>1A
(5% reading + 2 dgt) if V/R1A
(2% reading + 2 dgt) if V/R>1A
(5% reading + 2 dgt) if V/R1A
RCD TEST
Nominal tripping currents (IN) 10mA, 30mA, 100mA, 300mA, 500mA
RCD type AC, A General and Selective
Phase-Earth voltage 100V - 265V 50 Hz
Accuracy
(2% reading+2dgt)
Contact voltage Ut
Range [V]
0 - 2Utlim
Resolution [V]
0.1
Accuracy
- 0%, +(2% reading + 2 dgt)
Range []
1 -1999
Resolution []
1
Accuracy IN
- 0%, +(5% reading + 2 dgt)
RCD
AC
A
Range IN [mA]
(0.5 -1.4) IN
(0.5 -2.4) IN
Resolution [mA]
0.1 IN
0.1 IN
Accuracy IN
- 0%, +5% IN
- 0%, +5% IN
Range IN [mA]
(0.5 -1.4)IN
(0.5 -2) IN
Resolution [mA]
0.1 IN
0.1 IN
Accuracy IN
- 0%, +5% IN
- 0%, +5% IN
Resolution (Hz)
0.1
Accuracy
(0.1% reading+1 dgt)
IN > 10mA
RCD
AC
A
FREQUENCY
Range (Hz)
47.0 -63.6
Loop and RCD measurements are active only at 50Hz
Accuracy
(3% reading + 2 dgt)
Accuracy
(5% reading + 3 dgt)
Accuracy
(5% reading + 3 dgt)
Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without prior notice.
MACROTEST5035_PS_v01
Created on 12/2/2005 2:24:38 PM
Prepared by Fung
Page 4of 6
Resolution []
0.01
0.1
1
Accuracy
(5% reading + 3 dgt)
EARTH RESISTIVITY
Range (*)
0.60 -19.99 m
20.0 - 199.9m
200 -1999m
2.00 - 19.99km
20.0 - 125.5km
Resolution
0.01 m
0.1 m
1 m
0.01 km
0.1 km
Accuracy
2. GENERAL SPECIFICATIONS
REFERENCE STANDARD FOR SAFETY TESTS
VDE 413 German safety tests standard
EN 61008 RCDs without breakers
EN 61009 RCDs with breakers
EN60439-1 (CEI17/13) test on protective conductors
EN 60947-2 point B 4.2.4.1.
GENERAL INFO ON ACCURACY
Accuracy is indicated as [% reading + no. of digits].
DISPLAY AND MEMORY
Features Custom LCD
Visible area 63mmx63mm
Memory 999 misure
MECHANICAL FEATURES
Dimensions 225x165x 105mm
Weight (battery included) about 1,2kg
POWER SUPPLY
Batteries 6 batteries 1.5-LR6-AA-AM3-MN 1500
Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without prior notice.
MACROTEST5035_PS_v01
Created on 12/2/2005 2:24:38 PM
Prepared by Fung
Page 5of 6
Due to our policy of continual product development, we reserve the right to amend the specifications of all mentioned products without prior notice.
MACROTEST5035_PS_v01
Created on 12/2/2005 2:24:38 PM
Prepared by Fung
Page 6of 6