Professional Documents
Culture Documents
RENDEROC HSXtra
RENDEROC HSXtra
constructive solutions
Properties
Test method
Typical results
Permeability:
(DIN 1048 Part 5)
< 5 mm
Flexural strength:
(BS 6319 Part 3)
2
>13 N/mm at 28 days
Tensile strength:
(BS 6319 Part 7)
Compressive strength:
1
(BS 1881 Part 116 )
60 N/mm2 at 7 days
2
80 N/mm at 28 days
Water absorption:
(BS 1881 Part 121)
< 2%
< 500 columbs
i.
ii.
Technical support
Design criteria
Description
Page 1
10 mm
up to 50 mm thick
up to 75 mm thick
up to 100 mm thick
up to 3 m
Renderoc HS Xtra
Note: If the repair area exceeds 2.5 m2, consideration
should be given to the use of mass fill by means of
either Renderoc LAXtra spray applied mortar or
Renderoc LAXtra micro-concrete.
Storage
Shelf life
Renderoc HSXtra has a shelf life of 12 months if kept in a
dry environment, in its original, unopened packing. If stored
in conditions of high humidity and/or temperature, the shelf
life will be reduced.
(ii)
In situations where a substrate/repair barrier
is required, or enhanced bond strength/working time
is required, or where the substrate is likely to be
permanently wet or damp (e.g. seawalls, quays etc.),
Nitobond EP epoxy bonding agent should be used.
(iii)
Standard compliance
Renderoc HSXtra repair mortar system complies with the
following international standards:
ASTM C-157-93
DIN 1048 Part 5
BS 1881 part 121
:
:
:
Precautions
Application instructions
Estimating
During use, avoid inhalation of the dust and contact with the
skin or eyes. Wear suitable protective clothing eye
protection, gloves and respiratory equipment (particularly in
confined spaces).
Supply
Renderoc HSXtra:
20 kg bags
Yield
Renderoc HSXtra:
Limitations
Fire
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
www.fosroc.com
email: [email protected]
Regional Offices
Jeddah Sales Office
Jeddah Showroom
Riyadh
Dammam
Khamis Mushayt
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2
FO SA/Renderoc HSxtra/05/A