BSC6910 GU V100R016C00SPC650 Parameter Reference
BSC6910 GU V100R016C00SPC650 Parameter Reference
V100R016C00
Parameter List
Issue
06
Date
2014/12/30
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei T
All other trademarks and trade names mentioned in this document are the property of their respective h
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part
features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the c
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any
The information in this document is subject to change without notice. Every effort has been made in the preparation of this docum
contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express
Website:
http://www.huawei.com
Email:
ved.
y any means without prior written consent of Huawei Technologies Co., Ltd.
Co., Ltd.
t made between Huawei and the customer. All or part of the products, services and
r the usage scope. Unless otherwise specified in the contract, all statements,
hout warranties, guarantees or representations of any kind, either express or implied.
effort has been made in the preparation of this document to ensure accuracy of the
ment do not constitute a warranty of any kind, express or implied.
Purpose
This document describes the MO parameters of BSC6910. For the details about the parameters re
northbound interface interconnection, see the BSC6910 GSM V100R016 Parameter List and BSC
V100R016 Parameter List.
Intended Audience
This document is intended for:
Network planners
System engineers
Field engineers
Shift operators
Site maintainers
Network operators
Structure
The following table describes the attributes of each parameter.
Parameter Attribute
MO
Parameter ID
Parameter Name
NE
MML Command
Meaning
IsKey
Mandatory
Feature ID
Feature Name
Value Type
Issue 01 (06/12/2015)
Enumeration Number/Bit
Unit
Actual Value Range
Default Value
Recommended Value
Impact
Parameter Relationship
Access
Interruption Scope
Interruption Duration (min)
Caution
Issue 01 (06/12/2015)
Validation of Modification
Impact on Radio Network Performance
Introduced in Version
Attribute
Issue 01 (06/12/2015)
ument describes the MO parameters of BSC6910. For the details about the parameters related to
und interface interconnection, see the BSC6910 GSM V100R016 Parameter List and BSC6910 UMTS
16 Parameter List.
Description
Managed object of NE.
A simple character string used for identifying a parameter.
Name of a parameter.
NEs on which the parameter is set.
Man Machine Language (MML) command related to the parameter.
Function of a parameter, protocol that defines the parameter, whether the parameter is out of use in later versions, an
whether the parameter is an advanced parameter.
If the parameter will be out of use, a related description beginning with "Disuse statement" will be provided in the para
meaning.
Advanced parameters are not configured through northbound interfaces. To modify these parameters, contact Huawe
Customer Service Center for technical support.
If parameters meet one of the following conditions, they are treated as advanced parameters:
1. Parameters are temporarily introduced in a new feature or a customized feature to achieve optimal network perform
These parameters will have fixed values and will be deleted after the beta test or test at the customized site.
2. Modifications to these parameters have a great impact on network KPIs or performance.
Normally, modifications of these parameters are not required for features. To achieve optimal network performance, m
parameters must be modified because modification of a single parameter has little effect on the network and even ma
cause accidents, for example, service interruption.
Whether the parameter is used to identify an MO instance.
Whether the parameter is mandatory for creating an MO instance.
Type of a parameter value. For example, IP Address Type, Compound Type, Enumeration Type, Interval Type, Bit Fie
Type, Character String Type, Wildcard Mask Type, Subnet Mask Type, Password Type, Any Type, BCD Number Type
Issue 01 (06/12/2015)
Initial value assigned by the system for a parameter. For a mandatory parameter, no default value is available. For a b
parameter, if the value of a sub-parameter is ON, the bit representing the sub-parameter is set to 1; if the value of a s
parameter is OFF, the bit representing the sub-parameter is set to 0. None indicates that no default value is available
Generally, it is displayed on the configuration window of an ADD command but not displayed on the configuration win
a MOD/RMV/DSP/LST/SET command.
Source
for the
initial
configurationfor
of a
parameter.
The initial value source can be:
Parameter
values
recommended
different
scenarios.
Radio planning (Internal planning): The parameter value comes from the radio network plan, facilitating resource
management on the NE.
Radio planning (Negotiation with the peer): The parameter value comes from the radio network plan. The NE nego
this value with the peer device to ensure successful interworking.
Transport planning (Internal planning): The parameter value comes from the transport network plan, facilitating res
management on the NE.
Transport planning (Negotiation with the peer): The parameter value comes from the transport network plan. The
negotiates this value with the peer device to ensure successful interworking.
Equipment planning: The parameter value comes from the equipment plan.
Engineering design: The parameter value comes from the algorithm or function design.
Default/recommended value: The parameter value uses the default or recommended value, where the recommend
value is preferential. The default/recommended value can be used in most scenarios and adjusted for a specific scen
Parameter
impact scope.
N/A:
The parameter
value is not required.
Relationship with other parameters. For example, to use this parameter, you need to set related switches and parame
Whether a parameter has one of the following properties:
Read/Write: The parameter can be added, deleted, or modified.
Read Only: The parameter can be added or deleted only.
Whether the parameter modification interrupts the ongoing services. One of the following comments is provided:
Yes: The modification interrupts the ongoing services.
No (And no impact on the UE in idle mode): The modification does not interrupt the ongoing services, and has no
on the network access of UEs in idle mode.
No (Impact on the UE in idle mode): The modification does not interrupt the ongoing services, but affects the netwo
access of UEs in idle mode.
N/A: This comment is used when a parameter cannot be modified.
Possible interruption scope.
Possible interruption duration (unit: minute).
Cautions to be taken during the modification.
Issue 01 (06/12/2015)
How this parameter takes effect and whether the equipment needs to be restarted after the modification. The parame
modification does not impact the equipment means that the parameter takes effect immediately after the modification
Impact of the parameter on radio network performance.
Product version in which the parameter is introduced.
Whether the parameter is a radio parameter, a transport parameter, or an equipment parameter.
Issue 01 (06/12/2015)
10
dvanced parameters:
ed feature to achieve optimal network performance.
ta test or test at the customized site.
PIs or performance.
s. To achieve optimal network performance, multiple
er has little effect on the network and even may
Issue 01 (06/12/2015)
11
ML message), or ---
is null
e can be:
the radio network plan, facilitating resource
Issue 01 (06/12/2015)
12
n equipment parameter.
Issue 01 (06/12/2015)
13
273357673.xlsx
MO
G2GNCELL
06/12/2015
Parameter ID
Parameter Name
NE
BSC6910
MML Command
ADD G2GNCELL
MOD G2GNCELL
Meaning
Period during
which the
conditions for
handovers to
a better cell
are met.
According to
the P/N rule,
handovers to
a better cell
can be
triggered
when the
conditions for
handovers to
a better cell
are met for P
seconds
within N
seconds.
This
parameter
specifies P in
the P/N rule.
14597
273357673.xlsx
G2GNCELL
06/12/2015
ADD G2GNCELL
MOD G2GNCELL
Period during
which
handovers to
a better cell
are
measured.
According to
the P/N rule,
handovers to
a better cell
can be
triggered
when the
conditions for
handovers to
a better cell
are met for P
seconds
within N
seconds.
This
parameter
specifies N in
the P/N rule.
15597
273357673.xlsx
G2GNCELL BQLASTTIME
G2GNCELL BQSTATTIME
06/12/2015
BQ HO Valid Time
BQ HO Watch Time
BSC6910
BSC6910
ADD G2GNCELL
MOD G2GNCELL
According to
the P/N rule,
if the
conditions for
emergency
BQ handover
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.
ADD G2GNCELL
MOD G2GNCELL
According to
the P/N rule,
if the
conditions for
emergency
BQ handover
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.
16597
273357673.xlsx
G2GNCELL
06/12/2015
Directed Retry
DRHOLEVRANG
Handover Level
E
Range
BSC6910
ADD G2GNCELL
MOD G2GNCELL
handover
algorithm II,
this
parameter is
used to
calculate the
hysteresis of
handovers
due to
directed retry
using the
following
formula:
Hysteresis of
handovers
due to
directed retry
= Value of
"INTERCELL
HYST" Value of this
parameter.
Handovers
due to
directed retry
to a
neighboring
cell can be
triggered
when the
following
condition is
met:
(Downlink
receive level
of the
neighboring
17597
273357673.xlsx
G2GNCELL
06/12/2015
BSC6910
ADD G2GNCELL
MOD G2GNCELL
neighboring
cell can be
triggered
when either
of the
following
condition is
met:
Uplink
receive level
of the serving
cell after
power control
compensatio
n < Value of
"ULEDGETH
RES" + Value
of this
parameter 64
Downlink
receive level
of the serving
cell after
power control
compensatio
n < Value of
"DLEDGETH
RES" + Value
of this
parameter 64
In the case of
Huawei
handover
algorithm II,
handovers to
18597
273357673.xlsx
G2GNCELL HCSLASTTIME
06/12/2015
BSC6910
ADD G2GNCELL
MOD G2GNCELL
According to
the P/N rule,
if the
conditions for
the handover
to a different
micro cell
due to fast
movement
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.
19597
273357673.xlsx
G2GNCELL HCSSTATTIME
06/12/2015
ADD G2GNCELL
MOD G2GNCELL
According to
the P/N rule,
if the
conditions for
the handover
to a different
micro cell
due to fast
movement
are met in P
of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.
20597
273357673.xlsx
G2GNCELL INTERCELLHYST
06/12/2015
Inter-cell HO
Hysteresis
BSC6910
ADD G2GNCELL
MOD G2GNCELL
Hysteresis
value during
the
handovers
between
cells, This
value is used
to suppress
ping-pong
handovers
between
cells. The
actual value
of this
parameter is
equal to the
GUI value
minus 64.
21597
273357673.xlsx
G2GNCELL NCELLPUNEN
06/12/2015
Neighboring Cell
Penalty Switch
BSC6910
ADD G2GNCELL
MOD G2GNCELL
Whether to
apply penalty
on a
neighboring
cell when the
PBGT
handover,
concentric
cell
handover, or
hierarchical
handover in
handover
algorithm I is
triggered, or
when the
better cell
handover in
handover
algorithm II is
triggered.
This prevents
a call from
experiencing
ping-pong
handovers.
22597
273357673.xlsx
G2GNCELL TALASTTIME
06/12/2015
TA HO Valid Time
BSC6910
ADD G2GNCELL
MOD G2GNCELL
The P/N
criterion must
be met for
triggering a
TA handover.
That is, the
TA handover
can be
triggered only
if P
measuremen
t reports
among N
measuremen
t reports
meet the
triggering
conditions.
This
parameter
corresponds
to P in the
P/N criterion.
23597
273357673.xlsx
G2GNCELL TASTATTIME
06/12/2015
TA HO Watch Time
BSC6910
ADD G2GNCELL
MOD G2GNCELL
The P/N
criterion must
be met for
triggering a
TA handover.
That is, the
TA handover
can be
triggered only
if P
measuremen
t reports
among N
measuremen
t reports
meet the
triggering
conditions.
This
parameter
corresponds
to N in the
P/N criterion.
24597
273357673.xlsx
06/12/2015
BSC6910
ADD G2GNCELL
MOD G2GNCELL
Period during
which the
conditions for
handovers
without a
downlink
measuremen
t report.
According to
the P/N rule,
handovers
without a
downlink
measuremen
t report can
be triggered
when the
conditions for
handovers
without a
downlink
measuremen
t report are
met for P
seconds
within N
seconds.
This
parameter
specifies P in
the P/N rule.
25597
273357673.xlsx
G2GNCELL ULBQSTATTIME
06/12/2015
ADD G2GNCELL
MOD G2GNCELL
Period during
which the
conditions for
handovers
without a
downlink
measuremen
t report.
According to
the P/N rule,
handovers
without a
downlink
measuremen
t report can
be triggered
when the
conditions for
handovers
without a
downlink
measuremen
t report are
met for P
seconds
within N
seconds.
This
parameter
specifies N in
the P/N rule.
26597
273357673.xlsx
GCELLCHM HALFRATEREPA
TCHH Integration
GAD
CKINGSWITCH
06/12/2015
BSC6910
BSC6910
SET
GCELLCHMGAD
Whether to
convert
TCHHs to
TCHFs. If
this
parameter is
set to YES,
TCHHs are
converted to
TCHFs to
reduce
channel
segments
and ensure
that idle
TCHFs are
sufficient. If
this
parameter is
set to NO,
TCHHs are
not converted
to TCHFs.
SET GCELLHOAD
This
parameter is
a cell-level
parameter. If
the traffic
load in this
cell is lower
than the
threshold
specified by
this
parameter,
the cell can
absorb traffic
from
neighboring
cells.
27597
273357673.xlsx
GCELLHOA
BANTIME
D
06/12/2015
BSC6910
SET GCELLHOAD
intra-cell
handovers
reaches
"MAXCNTNU
M". If
"INTRACELL
SINUSEREN
" is set to
YES,
specified
MSs in a cell
are not
allowed to
initiate intracell
handovers
due to quality
problems
within the
duration
specified by
this
parameter. If
"INTRACELL
SINUSEREN
" is set to
NO, all MSs
in the cell are
not allowed
to initiate
intra-cell
handovers.
For MSs that
use handover
algorithm I,
intra-cell
handovers
due to quality
28597
273357673.xlsx
GCELLHOA
CONTINTV
D
06/12/2015
Interval for
BSC6910
Consecutive HO Jud.
SET GCELLHOAD
due to quality
problems
initiated by
an MS in a
cell at an
interval
specified by
this
parameter
are
consecutive.
If
"INTRACELL
SINUSEREN
" is set to
NO, the two
intra-cell
handovers
initiated by all
MSs in the
cell at an
interval
specified by
this
parameter
are
consecutive.
When
handover
algorithm I is
used, this
parameter
specifies the
interval
between
intra-cell
handover
29597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
The receive
quality
equals the
sum of the
30597
273357673.xlsx
06/12/2015
SET GCELLHOAD
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the downlink
receive
quality
threshold is
obtained
from the sum
of the values
of the
downlink
receive level
and this
parameter
during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the
downlink
receive
quality
threshold and
the value of
"INTERFERE
DLQUALOFF
OL". If
"INTERFER
OFFSWITCH
OL" is set to
31597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the downlink
receive
quality
threshold is
obtained
from the sum
of the values
of the
downlink
receive level
and
"INTERFERE
DLEVOFFOL
" during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the
downlink
receive
quality
threshold and
the value of
this
parameter. If
"INTERFER
32597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
quality at the
current uplink
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
33597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
calls.
The receive
quality
34597
273357673.xlsx
06/12/2015
SET GCELLHOAD
When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the uplink
receive
quality
threshold is
obtained
from the sum
of the values
of the uplink
level and this
parameter
during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the uplink
receive
quality
threshold and
the value of
"INTERFERE
ULQUALOFF
OL". If
"INTERFER
OFFSWITCH
OL" is set to
NO(No), the
35597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
decision
conditions.
When
handover
algorithm II is
used and
"INTERFER
OFFSWITCH
OL" is set to
YES(Yes),
the uplink
receive
quality
threshold is
obtained
from the sum
of the values
of the uplink
receive level
and
"INTERFERE
ULEVOFFOL
" during the
interference
handover
decision. The
final
threshold is
obtained
from the sum
of the uplink
receive
quality
threshold and
the value of
this
parameter. If
"INTERFER
36597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
threshold for
the receive
quality at the
current uplink
level.
The downlink
receive
quality after
filtering is
greater than
the specified
threshold for
the receive
quality at the
current
downlink
level.
At the current
uplink and
downlink
levels
(including the
correspondin
g level
offset), the
parameters
for specifying
the
thresholds for
the uplink
and downlink
receive
quality are as
follows:
"RXQUALn"
(1 <= n <=
12): used for
non-AMR FR
37597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
parameter is
set to
YES(Yes),
the four
parameters
"INTERFERE
ULEVOFFOL
",
"INTERFERE
DLEVOFFOL
",
"INTERFERE
ULQUALOFF
OL", and
"INTERFERE
DLQUALOFF
OL" are used
for decisions
on handovers
due to
interference
in overlaid
subcells. If
this
parameter is
set to
NO(No), the
four original
parameters
"INTERFERE
ULEVOFF",
"INTERFERE
DLEVOFF",
"INTERFERE
UQUALOFF",
and
"INTERFERE
DQUALOFF"
38597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
Whether to
adjust cell
coverage
based on cell
load. If this
parameter is
set to
YES(Yes),
the handover
margin is
adjusted
when the
load in the
serving cell is
high,
reducing the
coverage of
the serving
cell from the
aspects of
neighboring
cells at the
same layer.
39597
273357673.xlsx
GCELLHOA
LOADHOPERIOD Load HO Step Period BSC6910
D
06/12/2015
SET GCELLHOAD
"Load HO
Threshold",
all calls in the
serving cell
initiate
handover
requests at
the same
time, which
will suddenly
increase the
load of the
CPU. When
the traffic
volume is
high,
congestion
occurs in the
cell, leading
to call drops.
To resolve
this problem,
the BSC
uses the
hierarchical
load
handover
algorithm to
control the
number of
MSs included
in each level
of handovers.
This
parameter
indicates the
duration of
40597
273357673.xlsx
GCELLHOA
LOADOFFSET
D
06/12/2015
Load HO Bandwidth
BSC6910
SET GCELLHOAD
handovers
can be
performed
only when
the receive
level of the
current
serving cell is
in the range
"Edge HO DL
RX_LEV
Threshold" to
"Edge HO DL
RX_LEV
Threshold" +
"Load HO
Bandwidth".
In handover
algorithm II,
load
handovers
can be
performed
only when
the level
difference
between the
neighboring
cell and the
serving cell is
between
("Inter-cell
HO
Hysteresis" 64) - "Load
HO
Bandwidth"
and ("Inter-
41597
273357673.xlsx
GCELLHOA
MAXCNTNUM
D
06/12/2015
MAX Consecutive HO
BSC6910
Times
SET GCELLHOAD
or equal to
the value of
this
parameter,
intra-cell
handovers
are not
allowed for
the MS within
the duration
specified by
"BANTIME".
If
"INTRACELL
SINUSEREN
" is set to
NO, when
the interval
between two
intra-cell
handovers
initiated by all
MSs in the
cell is less
than
"CONTINTV"
, the two
intra-cell
handovers
are
consecutive.
If the number
of
consecutive
intra-cell
handovers is
greater than
or equal to
42597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOAD
Triggering
threshold for
an inter-layer
load-based
handover.
When the
load in the
serving cell is
higher than
or equal to
the threshold
specified by
this
parameter,
an inter-layer
load-based
handover is
triggered. If
this
parameter is
set to 0, the
inter-layer
load-based
handover
algorithm
does not take
effect.
43597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
during AMR
TCHF-toTCHH
handovers.
This
parameter
works with
"AMRFULLT
OHALFHOQ
UALTHRESH
". AMR
TCHF-toTCHH
handovers
can be
triggered
when both of
the following
conditions
are met:
Uplink
receive
signal quality
<= Value of
"AMRFULLT
OHALFHOQ
UALTHRESH
" + Value of
"AMRF2HHO
QUALTHFIN
E" x 0.1
Downlink
receive
signal quality
<= Value of
"AMRFULLT
OHALFHOQ
44597
273357673.xlsx
GCELLHOB AMRFULLTOHAL
AMR F-H Ho Allowed BSC6910
ASIC
FHOALLOW
06/12/2015
SET
GCELLHOBASIC
Whether to
enable the
algorithm for
load- and
quality-based
AMR TCHFto-TCHH
handovers.
45597
273357673.xlsx
AMRFULLTOHAL
GCELLHOB
AMR F-H Ho ATCB
FHOATCBADJST
ASIC
Adjust Step
EP
06/12/2015
BSC6910
SET
GCELLHOBASIC
With "F-H Ho
Period" and
the duration
for triggering
handover
from full rate
to half rate,
this
parameter
determines
the current
ATCB offset
by which to
choose the
MSs to
undergo
handover
from full rate
to half rate.
ATCB offset
= (duration
for triggering
handover
from full rate
to half
rate/"F-H Ho
Period" + 1) x
"AMR F-H Ho
ATCB Adjust
Step"
46597
273357673.xlsx
AMRFULLTOHAL
GCELLHOB
AMR F-H Ho ATCB
FHOATCBTHRES
ASIC
Threshold
H
06/12/2015
BSC6910
SET
GCELLHOBASIC
Threshold for
the AdapTive
Cell Border
(ATCB)
during AMR
TCHF-toTCHH
handovers.
AMR TCHFto-TCHH
handovers
can be
triggered
when the
following
condition is
met:
ATCB of an
AMR full-rate
call >= Value
of this
parameter ATCB offset
If the call is
initiated in an
overlaid
subcell, its
ATCB
excludes the
ATCB offset
in the
overlaid
subcell.
47597
273357673.xlsx
AMRFULLTOHAL
GCELLHOB
AMR F-H Ho Pathloss
FHOPATHADJST
BSC6910
ASIC
Adjust Step
EP
06/12/2015
SET
GCELLHOBASIC
With "F-H Ho
Period" and
the duration
for triggering
handover
from full rate
to half rate,
this
parameter
determines
the current
path loss
offset by
which to
choose the
MSs to
undergo
handover
from full rate
to half rate.
Path loss
offset =
(duration for
triggering
handover
from full rate
to half
rate/"F-H Ho
Period" + 1) x
"AMR F-H Ho
Pathloss
Adjust Step"
48597
273357673.xlsx
AMRFULLTOHAL
GCELLHOB
AMR F-H Ho Pathloss
FHOPATHTHRES
BSC6910
ASIC
Threshold
H
06/12/2015
SET
GCELLHOBASIC
Threshold for
the path loss
during AMR
TCHF-toTCHH
handovers.
AMR TCHFto-TCHH
handovers
can be
triggered
when the
following
condition is
met:
Path loss of
an AMR fullrate call <=
Value of this
parameter +
Path loss
offset
If the call is
initiated in an
overlaid
subcell, its
path loss
includes the
path loss
offset in the
overlaid
subcell.
49597
273357673.xlsx
AMRFULLTOHAL
GCELLHOB
AMR F-H Ho Qual.
FHOQUALTHRES
ASIC
Threshold
H
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
Quality
threshold for
the AMR
handover
from full rate
to half rate. If
the uplink
and downlink
receive
quality levels
of an AMR
full rate call
are both
equal to or
less than
"AMRFULLT
OHALFHOQ
UALTHRESH
"+
"AMRF2HHO
QUALTHFIN
E"*0.1, the
AMR call is
handed over
from full rate
to half rate.
SET
GCELLHOBASIC
Threshold for
the load in a
cell during
AMR TCHFto-TCHH
handovers.
AMR TCHFto-TCHH
handover
decisions can
be made
when the cell
load is higher
than this
threshold.
50597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
during AMR
TCHH-toTCHF
handovers.
This
parameter
works with
"AMRHALFT
OFULLHOQ
UALTHRESH
". AMR
TCHH-toTCHF
handovers
can be
triggered
when one of
the following
conditions is
met:
Uplink
receive
signal quality
>= Value of
"AMRHALFT
OFULLHOQ
UALTHRESH
" + Value of
"AMRH2FHO
QUALFINEE"
x 0.1
Downlink
receive
signal quality
>= Value of
"AMRHALFT
OFULLHOQ
51597
273357673.xlsx
AMRHALFTOFUL
GCELLHOB
AMR H-F Ho ATCB
LHOATCBTHRES
ASIC
Threshold
H
06/12/2015
BSC6910
SET
GCELLHOBASIC
Threshold for
the AdapTive
Cell Border
(ATCB)
during AMR
TCHH-toTCHF
handovers.
AMR TCHHto-TCHF
handovers
can be
triggered
when the
ATCB of an
AMR halfrate call is
less than or
equal to this
threshold.
If the call is
initiated in an
overlaid
subcell, its
ATCB
excludes the
ATCB offset
in the
overlaid
subcell.
52597
273357673.xlsx
AMRHALFTOFUL
GCELLHOB
AMR H-F Ho Pathloss
LHOPATHTHRES
BSC6910
ASIC
Threshold
H
06/12/2015
SET
GCELLHOBASIC
Threshold for
the path loss
during AMR
TCHH-toTCHF
handovers.
AMR TCHHto-TCHF
handovers
can be
triggered
when the
following
condition is
met:
Path loss of
an AMR halfrate call >=
Value of this
parameter +
Path loss
offset
If the call is
initiated in an
overlaid
subcell, its
path loss
includes the
path loss
offset in the
overlaid
subcell.
53597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
Whether to
enable the
algorithm for
quality-based
AMR TCHHto-TCHF
handovers.
Even if the
cell load
does not
reach the
threshold,
TCHH-toTCHF
handover
decisions can
be made
when this
parameter is
set to
YES(Yes).
54597
273357673.xlsx
AMRHALFTOFUL
GCELLHOB
AMR H-F Ho Qual.
LHOQUALTHRES
ASIC
Threshold
H
06/12/2015
BSC6910
SET
GCELLHOBASIC
Quality
threshold for
the AMR
handover
from half rate
to full rate. If
the uplink or
downlink
receive
quality level
of an AMR
half rate call
is equal to or
greater than
"AMRHALFT
OFULLHOQ
UALTHRESH
"+
"AMRH2FHO
QUALFINE"*
0.1, the AMR
call is
handed over
from half rate
to full rate.
55597
273357673.xlsx
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
When
"AMRFULLT
OHALFHOAL
LOW" is set
to YES and
the load of a
cell is lower
than this
threshold, a
decision on
AMR H-F
handovers is
made. When
"IBCAIIHRPri
Sw" is set to
YES and the
load of a cell
is lower than
this
threshold, do
not enable
the IBCA II
half-rate
TCHH
allocation
optimization
function.
SET
GCELLHOBASIC
Whether to
enable the
algorithm for
the handover
to a better
cell
56597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
HO
Hysteresis".F
or an MS
with high
receive level,
the receive
level of the
neighboring
cell must be
greater than
or equal to
the receive
level of the
serving cell
plus
"INTERCELL
HYST".In the
overlaid
subcell of a
concentric
cell, the BSC
regards an
MS as a lowlevel MS
after
detecting that
the downlink
receive level
of the MS is
less than the
value of
"DLEDGETH
RES". In
other
scenarios,
the BSC
regards an
MS as a low-
57597
273357673.xlsx
GCELLHOB
EDGELAST
ASIC
GCELLHOB
EDGESTAT
ASIC
06/12/2015
Handover Algorithm II
BSC6910
Edge HO Valid Time
Handover Algorithm II
BSC6910
Edge HO Watch Time
SET
GCELLHOBASIC
According to
the P/N rule,
if the
conditions for
edge
handover are
met in P of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number P.
SET
GCELLHOBASIC
According to
the P/N rule,
if the
conditions for
edge
handover are
met in P of N
measuremen
t reports, the
handover is
triggered.
This
parameter
specifies the
number N.
58597
273357673.xlsx
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
handover
based on the
load.
If the cell
load is less
than
"AMRFULLT
OHALFHOT
HRESH"-"Ful
lToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRFUL
LTOHALFTH
RESH"-"FullT
oHalfHoLoad
Stf", an AMR
or non-AMR
TCHF-TCHH
handover is
stopped.
If the cell
load is more
than
"AMRHALFT
OFULLHOTH
RESH"+"Full
ToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRHAL
FTOFULLTH
RESH"+"Full
ToHalfHoLoa
dStf", an
AMR or non-
SET
GCELLHOBASIC
ATCB
threshold for
the overlaid
subcell,
which is
equal to the
sum of
TCHF-TCHH
handover
ATCB
threshold and
the value of
this
parameter.
59597
273357673.xlsx
GCELLHOB FULLTOHALFHO
F-H Ho Duration
ASIC
DURATION
06/12/2015
BSC6910
SET
GCELLHOBASIC
Duration of
the handover
from full rate
to half rate. If
the cell load
is greater
than the
preset
threshold, the
calls that
meet the
conditions for
the handover
from full rate
to half rate
are handed
over from full
rate to half
rate in this
duration.
60597
273357673.xlsx
GCELLHOB FULLTOHALFHOL
F-H Ho Last Time
ASIC
ASTTIME
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHF-TCHH
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number P.
SET
GCELLHOBASIC
Threshold of
path loss for
TCHF-TCHH
handovers in
overlaid
subcells,
which is
equal to the
difference
between path
loss for
TCHF-TCHH
handovers
and this
parameter.
61597
273357673.xlsx
GCELLHOB FULLTOHALFHO
F-H Ho Period
ASIC
PERIOD
06/12/2015
BSC6910
SET
GCELLHOBASIC
AMR TCHFto-TCHH
handovers.
When the
cell load is
higher than
the threshold
specified by
"AMRFULLT
OHALFHOT
HRESH" or
"NOAMRFUL
LTOHALFTH
RESH", the
calls that
meet the
conditions for
AMR TCHFto-TCHH
handovers
can be
handed over
from a TCHF
to a TCHH
within the
period
specified by
"FULLTOHAL
FHODURATI
ON". This
parameter is
also used to
specify the
bandwidth for
handovers at
each
hierarchy
62597
273357673.xlsx
GCELLHOB FULLTOHALFHO
F-H Ho Stat. Time
ASIC
STATTIME
06/12/2015
BSC6910
SET
GCELLHOBASIC
According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHF-TCHH
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number N.
63597
273357673.xlsx
06/12/2015
SET
GCELLHOBASIC
RESH",
"AMRHALFT
OFULLHOTH
RESH" and
"NOAMRHAL
FTOFULLTH
RESH"to
prevent pingpong
handovers.
If the cell
load is less
than
"AMRFULLT
OHALFHOT
HRESH"-"Ful
lToHalfHoLoa
dStf" or if the
cell load is
less than
"NOAMRFUL
LTOHALFTH
RESH"-"FullT
oHalfHoLoad
Stf", an AMR
or non-AMR
TCHF-TCHH
handover is
stopped.
If the cell
load is more
than
"AMRHALFT
OFULLHOTH
RESH"+"Full
ToHalfHoLoa
dStf" or if the
64597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
Difference
between the
ATCB
threshold in
an overlaid
subcell and
that in an
underlaid
subcell
during AMR
TCHH-toTCHF
handovers.
65597
273357673.xlsx
GCELLHOB HALFTOFULLHO
H-F Ho Duration
ASIC
DURATION
06/12/2015
BSC6910
SET
GCELLHOBASIC
Period of
AMR TCHHto-TCHF
handovers.
When the
cell load is
lower than
the threshold
specified by
"AMRFULLT
OHALFHOT
HRESH" or
"NOAMRFUL
LTOHALFTH
RESH", the
calls that
meet the
conditions for
AMR TCHHto-TCHF
handovers
can be
handed over
from a TCHH
to a TCHF
within the
period
specified by
this
parameter.
66597
273357673.xlsx
GCELLHOB HALFTOFULLHO
H-F Ho Last Time
ASIC
LASTTIME
06/12/2015
BSC6910
SET
GCELLHOBASIC
According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHH-TCHF
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number P.
67597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
Path loss
difference
between the
overlaid and
underlaid
subcells.
68597
273357673.xlsx
GCELLHOB HALFTOFULLHO
H-F Ho Stat. Time
ASIC
STATTIME
06/12/2015
BSC6910
SET
GCELLHOBASIC
According to
the P/N rule,
if P out of N
MRs meet
the
conditions for
TCHH-TCHF
handovers,
such
handovers
are triggered.
This
parameter
specifies the
number N.
69597
273357673.xlsx
GCELLHOB
HOPRIOMODEN HO Priority Adjustment BSC6910
ASIC
06/12/2015
SET
GCELLHOBASIC
handover
priority in
handover
algorithm II. If
this
parameter is
set to
YES(Yes), an
edge
handover
using
handover
algorithm II is
not an
emergency
handover,
cell level,
priority, and
load are
considered in
an
emergency
handover,
and a better
cell handover
takes
precedence
over an
emergency
handover. If
this
parameter is
set to
NO(No), the
handover
priority in
handover
70597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
The
triggering of
interference
handovers
must meet
the P/N
criteria, that
is, when P
out of N
measuremen
t reports
meet the
condition for
interference
handovers, a
concentric
circle
handover is
triggered.
This
parameter
corresponds
to the P in
the P/N
criteria.
71597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
The
triggering of
interference
handovers
must meet
the P/N
criteria, that
is, when P
out of N
measuremen
t reports
meet the
condition for
interference
handovers, a
concentric
circle
handover is
triggered.
This
parameter
corresponds
to the N in
the P/N
criteria.
72597
273357673.xlsx
GCELLHOB
INTERFHOEN
ASIC
06/12/2015
Interference HO
Allowed
BSC6910
SET
GCELLHOBASIC
Whether to
allow the
interference
handover
algorithm.
Interference
handovers
are triggered
when the
receive
quality level
is greater
than the
expected
receive
quality
threshold
based on the
current
receive level.
That is,
handovers
are required
when the
MSs are
subject to all
kinds of radio
interferences.
73597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
Whether to
optimize load
control
method for
TCHF-TCHH
handovers. If
this
parameter is
set to YES,
the number
of MSs
involved in a
TCHF-TCHH
handover is
accurately
determined
based on the
load range. If
this
parameter is
set to NO,
the number
of MSs
involved in a
TCHF-TCHH
handover is
accurately
determined
based on the
signal level
band range.
74597
273357673.xlsx
Non-AMR F-H HO
GCELLHOB NOAMRF2HHOQ
Quality Thres. Fine
ASIC
UALTHFINE
Tune
06/12/2015
BSC6910
SET
GCELLHOBASIC
75597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
Whether to
allow nonAMR voice FH handover.
76597
273357673.xlsx
NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOATCBADJ
ASIC
ATCB Adjust Step
STEP
06/12/2015
BSC6910
SET
GCELLHOBASIC
Decides the
offset of the
current ATCB
together with
other two
parameters:
"F-H Ho
Period" and
period of
triggering a
F-H
handover,
thus
selecting
target users
for F-H
handovers.
ATCB offset
= (Period of
triggering a
F-H
handover /
"F-H Ho
Period" + 1) *
"Non-AMR FH Ho ATCB
Adjust Step".
77597
273357673.xlsx
NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOATCBTHR
ASIC
ATCB Threshold
ESH
06/12/2015
BSC6910
SET
GCELLHOBASIC
Threshold for
the AdapTive
Cell Border
(ATCB)
during nonAMR TCHFto-TCHH
handovers.
Non-AMR
TCHF-toTCHH
handovers
can be
triggered
when the
following
condition is
met:
ATCB of a
non-AMR
full-rate call +
ATCB offset
>= Value of
this
parameter
78597
273357673.xlsx
NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOPATHADJ
ASIC
Pathloss Adjust Step
STEP
06/12/2015
BSC6910
SET
GCELLHOBASIC
Decides the
current path
cost offset
together with
other two
parameters:
"F-H Ho
Period" and
period of
triggering a
F-H
handover,
thus
selecting
target users
for F-H
handovers.
Path cost
offset =
(Period of
triggering a
F-H
handover /
"F-H Ho
Period" + 1) *
"Non-AMR FH Ho
Pathloss
Adjust Step".
79597
273357673.xlsx
NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOPATHTHR
ASIC
Pathloss Threshold
ESH
06/12/2015
BSC6910
SET
GCELLHOBASIC
Threshold for
the path loss
during nonAMR TCHFto-TCHH
handovers.
Non-AMR
TCHF-toTCHH
handovers
can be
triggered
when the
following
condition is
met:
Path loss of
an AMR fullrate call <=
Value of this
parameter +
Path loss
offset.
80597
273357673.xlsx
NOAMRFULLTOH
GCELLHOB
Non-AMR F-H Ho
ALFHOQUALTHR
ASIC
Qual. Threshold
ESH
06/12/2015
BSC6910
SET
GCELLHOBASIC
Quality
threshold for
non-AMR FH handovers.
When the
uplink
receive
quality and
downlink
receive
quality of a
user are both
equal to or
less than
"NOAMRFUL
LTOHALFHO
QUALTHRES
H" +
"NOAMRF2H
HOQUALTH
FINE"*0.1, a
F-H
handover can
be triggered
for the user.
81597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOBASIC
Threshold for
the load in a
cell during
non-AMR
TCHF-toTCHH
handovers.
Non-AMR
TCHF-toTCHH
handover
decisions can
be made
when the cell
load is higher
than this
threshold.
82597
273357673.xlsx
Non-AMR H-F HO
GCELLHOB NOAMRH2FHOQ
Quality Thres. Fine
ASIC
UALFINE
Tune
NOAMRHALFTOF
GCELLHOB
Non-AMR H-F Ho
ULLHOATCBTHR
ASIC
ATCB Threshold
ESH
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
SET
GCELLHOBASIC
When the
ATCB value
of non-AMR
half rate
voice is equal
to or less
than this
threshold, the
condition for
non-AMR HF handovers
is met.
83597
273357673.xlsx
NOAMRHALFTOF
GCELLHOB
Non-AMR H-F Ho
ULLHOPATHTHR
ASIC
Pathloss Threshold
ESH
NOAMRHALFTOF
GCELLHOB
Allow Non-AMR H-F
ULLHOQUALALL
ASIC
Quality-based HO
OW
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
When the
path loss
value of nonAMR half
rate voice is
no smaller
than this
threshold, the
condition for
non-AMR HF handovers
is met.
SET
GCELLHOBASIC
Whether to
trigger nonAMR H-F
handovers
according to
the uplink
and downlink
receive
quality.
84597
273357673.xlsx
NOAMRHALFTOF
GCELLHOB
Non-AMR H-F Ho
ULLHOQUALTHR
ASIC
Qual. Threshold
ESH
06/12/2015
BSC6910
SET
GCELLHOBASIC
AMR TCHHto-TCHF
handovers.
This
parameter is
used with
"NOAMRHAL
FTOFULLHO
QUALTHRES
H". Non-AMR
TCHH-toTCHF
handovers
can be
triggered
when either
of the
following
conditions is
met:
Uplink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES
H" + Value of
"NOAMRH2F
HOQUALFIN
E" x 0.1
Downlink
receive
signal quality
>= Value of
"NOAMRHAL
FTOFULLHO
QUALTHRES
85597
273357673.xlsx
GCELLHOB
PATHLOSSHOEN Pathloss Ho. Enable
ASIC
06/12/2015
BSC6910
BSC6910
SET
GCELLHOBASIC
When
"NOAMRFUL
LTOHALFHO
ALLOW" is
set to YES
and the load
of a cell is
lower than
this
threshold, a
decision on
non-AMR HF handovers
is made.
When
"IBCAIIHRPri
Sw" is set to
ON and the
load of a cell
is lower than
this
threshold, do
not enable
the IBCA II
half-rate
TCHH
allocation
optimization
function.
SET
GCELLHOBASIC
Whether to
perform path
loss-based
sorting in a
better cell
handover
algorithm.
86597
273357673.xlsx
GCELLHOE
ULQUALIMIT
MG
GCELLHOFI
INITUPFILEN
TPEN
06/12/2015
UL Qual. Threshold
Initial Increment
Filtering Allowed
BSC6910
BSC6910
An
emergency
handover
due to bad
quality is
triggered
SET GCELLHOEMG when the
uplink
receive
quality is not
smaller than
"UL Qual.
Threshold".
SET
GCELLHOFITPEN
filtering
algorithm is
enabled. If
this
parameter is
set to
YES(Yes),
the initial
incremental
filtering
algorithm is
enabled
when a call
accesses a
new channel,
and the timer
specified by
"TCHHOMINI
NTV" or
"SDHOMININ
TV" is
enabled
simultaneous
ly with
incremental
filtering. If
this
parameter is
set to
NO(No), the
initial
incremental
filtering
algorithm is
disabled.
This
parameter is
87597
273357673.xlsx
BSC6910
06/12/2015
SET
GCELLHOFITPEN
Period in
which
interference
handovers
are not
allowed after
a successful
or failed
interference
handover is
performed.
SET
GCELLHOFITPEN
After a load
handover
succeeds,
the BSC
punishes the
former
serving cell
during
"Penalty
Time on
Load HO" by
subtracting
"Penalty
Value on
Load HO"
from the
receive level
of the former
serving cell,
thus avoiding
ping-pong
handovers.
88597
273357673.xlsx
06/12/2015
SET
GCELLHOFITPEN
After a load
handover
succeeds,
the BSC
punishes the
former
serving cell
during
"Penalty
Time on
Load HO" by
subtracting
"Penalty
Value on
Load HO"
from the
receive level
of the former
serving cell,
thus avoiding
ping-pong
handovers.
89597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOFITPEN
Whether to
enable
penalty
inheritance
for loadbased
handovers.
With the
handover
penalty
inheritance
function, the
penalty list
will be
transferred to
the target cell
along with a
call
handover.
90597
273357673.xlsx
GCELLHOFI
NCell Filter Length for
NSIGSTRFLTLEN
BSC6910
TPEN
SDCCH Level
06/12/2015
SET
GCELLHOFITPEN
For the
purpose of
accurately
reflecting the
radio
environment
of a network,
filtering is
performed on
the
measured
values in
several
consecutive
measuremen
t reports.
This
parameter
indicates the
number of
measuremen
t reports
received on
signaling
channels
used for the
filtering of
neighboring
cell signal
strength.
91597
273357673.xlsx
06/12/2015
BSC6910
SET
GCELLHOFITPEN
When the
network
receives
measuremen
t reports, the
measuremen
t values in
several
straight
measuremen
t reports are
filtered to
reflect the
radio
operating
environment
for the sake
of accuracy.
This
parameter
specifies the
number of
measuremen
t reports
sampled for
filtering the
TA on the
signaling
channel.
92597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOIUO
Initial signal
level used to
compute the
handover
zone for an
MS during
the
hierarchical
load-based
handover
from the
underlaid
subcell to the
overlaid
subcell of the
enhanced
concentric
cell.
93597
273357673.xlsx
06/12/2015
SET GCELLHOIUO
concentric
cell. When
this
parameter is
set to
TCHMAXPO
WER, the
BSC
compensates
for the level
of the
overlaid
subcell using
the maximum
TCH transmit
power. When
this
parameter is
set to
ULBCCHPO
WER, the
BSC
compensates
for the level
of the
overlaid
subcell using
the BCCH
level of the
underlaid
subcell for an
enhanced
concentric
cell or using
the sum of
maximum
TCH transmit
power and
94597
273357673.xlsx
06/12/2015
BSC6910
SET GCELLHOIUO
underlaid
subcell. If this
parameter is
set to YES,
the number
of MSs to be
handed over
is accurately
determined
based on the
load range
when loadbased
handovers
are
performed
between
overlaid and
underlaid
subcells in an
enhanced
concentric
cell. If this
parameter is
set to NO,
the number
of MSs is
determined
based on the
signal level
band range
when loadbased
handovers
are
performed
between
overlaid and
95597
273357673.xlsx
IsKey
NO
06/12/2015
Mandatory
NO
Feature ID
GBFD510501
Feature Name
HUAWEI II
Handover
Value Type
Interval Type
1~32
96597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
97597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
06/12/2015
98597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
0~128
99597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
0~127
100597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
101597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
102597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD118106
GBFD510501
HUAWEI I
Handover
Dynamic Power
Sharing
HUAWEI II
Handover
Interval Type
0~127
103597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
104597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
105597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
106597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~8
107597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~8
108597
273357673.xlsx
NO
NO
GBFD113402
GBFD115504
NO
NO
GBFD510501
06/12/2015
Dynamic
Adjustment
Between FR and
HR
Enumeration Type NO(No), YES(Yes)
AMR FR/HR
Dynamic
Adjustment
HUAWEI II
Handover
Interval Type
0~100
109597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
1~200
110597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
1~200
111597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-30~30
112597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
GBFD510501
Concentric Cell
HUAWEI II
Handover
Interval Type
-30~30
113597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
GBFD510501
Concentric Cell
HUAWEI II
Handover
Interval Type
-30~30
114597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-30~30
115597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-30~30
116597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
GBFD510501
Concentric Cell
HUAWEI II
Handover
Interval Type
-30~30
117597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
GBFD510501
Concentric Cell
HUAWEI II
Handover
Interval Type
-30~30
118597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-30~30
119597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
GBFD510501
Concentric Cell
HUAWEI II
Handover
120597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
121597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
1~255
122597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
0~63
123597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
1~20
124597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~100
125597
273357673.xlsx
NO
06/12/2015
NO
GBFD113402
GBFD510501
Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover
0~9
126597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
HUAWEI I
Handover
127597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
128597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-63~255
129597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
130597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
131597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~7
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~100
06/12/2015
132597
273357673.xlsx
NO
06/12/2015
NO
GBFD113402
GBFD510501
Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover
0~9
133597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-63~255
134597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
135597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
HUAWEI I
Handover
136597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
HUAWEI I
Handover
Interval Type
0~7
137597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
NO
NO
GBFD510501
HUAWEI II
Handover
06/12/2015
0~100
138597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
139597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
06/12/2015
140597
273357673.xlsx
NO
NO
GBFD113402
NO
NO
GBFD510501
06/12/2015
Dynamic
Adjustment
Enumeration Type OFF(Off), ON(On)
Between FR and
HR
HUAWEI II
Handover
Interval Type
0~255
141597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~600
142597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
06/12/2015
143597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~600
144597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
145597
273357673.xlsx
NO
06/12/2015
NO
GBFD113402
GBFD510501
Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover
0~100
146597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
147597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~600
148597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
149597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
150597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~32
151597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
152597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
153597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
1~16
154597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
155597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
156597
273357673.xlsx
NO
06/12/2015
NO
GBFD113402
GBFD510501
Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover
0~9
157597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
158597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
159597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
-63~255
160597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
161597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~255
162597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~7
163597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~100
164597
273357673.xlsx
NO
NO
GBFD113402
GBFD510501
NO
NO
GBFD510501
06/12/2015
Dynamic
Adjustment
Between FR and
Interval Type
HR
HUAWEI II
Handover
0~9
HUAWEI II
Handover
-63~255
Interval Type
165597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
NO
NO
GBFD510501
HUAWEI II
Handover
06/12/2015
0~255
166597
273357673.xlsx
NO
06/12/2015
NO
GBFD510501
HUAWEI II
Handover
Interval Type
0~7
167597
273357673.xlsx
NO
NO
GBFD510501
HUAWEI II
Handover
Interval Type
NO
NO
GBFD510501
HUAWEI II
Handover
06/12/2015
0~100
168597
273357673.xlsx
NO
NO
GBFD110601
GBFD510501
NO
NO
GBFD510501
06/12/2015
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
HUAWEI II
Handover
0~70
169597
273357673.xlsx
NO
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
0~255
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
0~255
170597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
0~63
171597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
172597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
1~31
173597
273357673.xlsx
NO
06/12/2015
NO
GBFD110601
GBFD510501
HUAWEI I
Handover
HUAWEI II
Handover
Interval Type
1~31
174597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
Concentric Cell
Interval Type
0~63
175597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
Concentric Cell
TCHMAXPOWER(Tc
h Max Power),
Enumeration Type
ULBCCHPOWER(Un
derlaid BCCH Power)
176597
273357673.xlsx
NO
06/12/2015
NO
GBFD113201
Concentric Cell
177597
273357673.xlsx
Enumeration Number/Bit
N/A
06/12/2015
Unit
480ms
480~15360
Default Value
178597
273357673.xlsx
N/A
06/12/2015
480ms
480~15360
179597
273357673.xlsx
N/A
470ms;
480ms
480~7680(TCH);470~752
0(SDCCH)
N/A
470ms;
480ms
480~7680(TCH);470~752
0(SDCCH)
06/12/2015
180597
273357673.xlsx
N/A
06/12/2015
dB
0~128
72
181597
273357673.xlsx
N/A
06/12/2015
None
-64~63
64
182597
273357673.xlsx
N/A
06/12/2015
0.5s
0.5~8
183597
273357673.xlsx
N/A
06/12/2015
0.5s
0.5~8
184597
273357673.xlsx
N/A
06/12/2015
dB
-64~63
68
185597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
186597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~7680(TCH);470~752
0(SDCCH)
187597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~7680(TCH);470~752
0(SDCCH)
188597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~3840(TCH);470~376
0(SDCCH)
189597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~3840(TCH);470~376
0(SDCCH)
190597
273357673.xlsx
NO~0, YES~1
None
NO, YES
N/A
None
0~100
06/12/2015
NO(No)
100
191597
273357673.xlsx
N/A
06/12/2015
1~200
20
192597
273357673.xlsx
N/A
06/12/2015
1~200
193597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
194597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
195597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
10
196597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
197597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
198597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
-10
199597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
200597
273357673.xlsx
N/A
06/12/2015
dB
-30~30
201597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
202597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
203597
273357673.xlsx
N/A
06/12/2015
1~255
10
204597
273357673.xlsx
N/A
06/12/2015
dB
0~63
25
205597
273357673.xlsx
N/A
06/12/2015
None
1~20
206597
273357673.xlsx
N/A
06/12/2015
None
0~100
207597
273357673.xlsx
N/A
06/12/2015
None
0~9
208597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
209597
273357673.xlsx
N/A
06/12/2015
dB
0~255
210597
273357673.xlsx
N/A
06/12/2015
dB
-63~255
20
211597
273357673.xlsx
N/A
06/12/2015
dB
0~255
212597
273357673.xlsx
N/A
06/12/2015
dB
0~255
100
213597
273357673.xlsx
N/A
None
0~7
N/A
0~100
06/12/2015
75
214597
273357673.xlsx
N/A
06/12/2015
None
0~9
215597
273357673.xlsx
N/A
06/12/2015
dB
-63~255
216597
273357673.xlsx
N/A
06/12/2015
dB
0~255
108
217597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
218597
273357673.xlsx
N/A
06/12/2015
None
0~7
219597
273357673.xlsx
N/A
0~100
NO~0, YES~1
None
NO, YES
06/12/2015
15
YES(Yes)
220597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
221597
273357673.xlsx
N/A
470ms;
480ms
480~15360(TCH);470~15
040(SDCCH)
N/A
470ms;
480ms
480~15360(TCH);470~15
040(SDCCH)
06/12/2015
222597
273357673.xlsx
OFF~0, ON~1
None
OFF, ON
N/A
dB
0~255
06/12/2015
OFF(Off)
20
223597
273357673.xlsx
N/A
06/12/2015
0~600
224597
273357673.xlsx
N/A
480ms
480~15360
N/A
dB
0~255
06/12/2015
10
225597
273357673.xlsx
N/A
06/12/2015
0~600
226597
273357673.xlsx
N/A
06/12/2015
480ms
480~15360
227597
273357673.xlsx
N/A
06/12/2015
None
0~100
10
228597
273357673.xlsx
N/A
06/12/2015
dB
0~255
20
229597
273357673.xlsx
N/A
06/12/2015
0~600
230597
273357673.xlsx
N/A
06/12/2015
480ms
480~15360
231597
273357673.xlsx
N/A
06/12/2015
dB
0~255
10
232597
273357673.xlsx
N/A
06/12/2015
480ms
480~15360
233597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
234597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~7680(TCH);470~752
0(SDCCH)
235597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~7680(TCH);470~752
0(SDCCH)
236597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
YES(Yes)
237597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
238597
273357673.xlsx
N/A
06/12/2015
None
0~9
239597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
240597
273357673.xlsx
N/A
06/12/2015
dB
0~255
241597
273357673.xlsx
N/A
06/12/2015
dB
-63~255
30
242597
273357673.xlsx
N/A
06/12/2015
dB
0~255
243597
273357673.xlsx
N/A
06/12/2015
dB
0~255
95
244597
273357673.xlsx
N/A
06/12/2015
None
0~7
245597
273357673.xlsx
N/A
06/12/2015
0~100
85
246597
273357673.xlsx
N/A
None
0~9
N/A
dB
-63~255
06/12/2015
14
247597
273357673.xlsx
N/A
dB
0~255
NO~0, YES~1
None
NO, YES
06/12/2015
103
NO(No)
248597
273357673.xlsx
N/A
06/12/2015
None
0~7
249597
273357673.xlsx
N/A
0~100
NO~0, YES~1
None
NO, YES
06/12/2015
25
NO(No)
250597
273357673.xlsx
N/A
None
0~70
NO~0, YES~1
None
NO, YES
06/12/2015
55
NO(No)
251597
273357673.xlsx
N/A
0~255
15
N/A
0~255
10
06/12/2015
252597
273357673.xlsx
N/A
06/12/2015
dB
0~63
63
253597
273357673.xlsx
OFF~0, ON~1
06/12/2015
None
OFF, ON
OFF(Off)
254597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~14880(TCH);470~14
570(SDCCH)
255597
273357673.xlsx
N/A
06/12/2015
470ms;
480ms
480~14880(TCH);470~14
570(SDCCH)
256597
273357673.xlsx
N/A
06/12/2015
dB
0~63
63
257597
273357673.xlsx
TCHMAXPOWER~0,
ULBCCHPOWER~1
06/12/2015
None
TCHMAXPOWER,
ULBCCHPOWER
ULBCCHPOWER(Unde
rlaid BCCH Power)
258597
273357673.xlsx
NO~0, YES~1
06/12/2015
None
NO, YES
NO(No)
259597
273357673.xlsx
Recommended Value
06/12/2015
Impact
Cell
Parameter Relationship
260597
273357673.xlsx
06/12/2015
Cell
261597
273357673.xlsx
06/12/2015
Cell
Cell
262597
273357673.xlsx
72
06/12/2015
Cell
263597
273357673.xlsx
64
06/12/2015
Cell
264597
273357673.xlsx
06/12/2015
Cell
265597
273357673.xlsx
06/12/2015
Cell
266597
273357673.xlsx
06/12/2015
Cell
267597
273357673.xlsx
NO(No)
06/12/2015
Cell
268597
273357673.xlsx
06/12/2015
Cell
269597
273357673.xlsx
06/12/2015
Cell
270597
273357673.xlsx
06/12/2015
Cell
271597
273357673.xlsx
06/12/2015
Cell
272597
273357673.xlsx
Default/Recommended
Value
NO(No)
100
06/12/2015
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes),
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
and
[GCELLCHMGAD:TCHLOADOPT
SWITCH] is set to ON(On).
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II).
273597
273357673.xlsx
20
06/12/2015
Cell
-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:CONTINTV] and
[GCELLHOAD:MAXCNTNUM] to
prevent frequent intra-cell
handovers.
274597
273357673.xlsx
06/12/2015
Cell
-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:BANTIME] and
[GCELLHOAD:MAXCNTNUM] to
prevent frequent intra-cell
handovers.
275597
273357673.xlsx
06/12/2015
Cell
-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
are both set to YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.
276597
273357673.xlsx
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
[GCELLHOBASIC:INTERFHOEN]
is set to YES, and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] is set to YES.
277597
273357673.xlsx
10
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
[GCELLHOBASIC:INTERFHOEN]
is set to YES, and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] is set to YES.
278597
273357673.xlsx
06/12/2015
Cell
-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
are both set to YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.
279597
273357673.xlsx
06/12/2015
Cell
-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
in this command are both set to
YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.
280597
273357673.xlsx
-10
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTERFHOEN]
and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] in this command are
both set to YES(Yes).
281597
273357673.xlsx
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTERFHOEN]
and
[GCELLHOAD:INTERFEROFFSW
ITCHOL] in this command are
both set to YES(Yes).
282597
273357673.xlsx
06/12/2015
Cell
-Others:
1. This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] and
[GCELLHOBASIC:INTERFHOEN]
in this command are both set to
YES(Yes).
2. This parameter is used with
"RXQUALn" to determine the
interference handover threshold.
283597
273357673.xlsx
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] set to HOALGORITHM2 and
[GCELLHOBASIC:INTERFHOEN]
is set to YES.
284597
273357673.xlsx
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:LoadHoEn] is
set to YES(Yes).
285597
273357673.xlsx
10("HOCTRLSWITCH" in
"SET GCELLHOBASIC" is set
to
Radio Planning (Internal
HOALGORITHM1);5("HOCTR
planning)
LSWITCH" in "SET
GCELLHOBASIC" is set to
HOALGORITHM2)
06/12/2015
Cell
-Others:
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is used with
[GCELLHOAD:LOADHOPERIOD],
[GCELLHOAD:LOADHOSTEP],
[GCELLHOAD:LOADOFFSET],
and
[GCELLHOBASIC:DLEDGETHRE
S] to determine the scope of
hierarchical load-based
handovers.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is used with
[GCELLHOAD:LOADHOPERIOD],
[GCELLHOAD:LOADHOSTEP],
[GCELLHOAD:LOADOFFSET],
and [G2GNCELL:EDGEHOHYST]
or
[G2GNCELL:INTERCELLHYST]
to determine the scope of
hierarchical load-based
handovers.
286597
273357673.xlsx
25("HOCTRLSWITCH" in
"SET GCELLHOBASIC" is set
to
Radio Planning (Internal
HOALGORITHM1);8("HOCTR
planning)
LSWITCH" in "SET
GCELLHOBASIC" is set to
HOALGORITHM2)
06/12/2015
Cell
-Others:
This parameter is valid only when
[GCELLHOBASIC:LOADHOEN] is
set to YES.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
the default value of this parameter
is 25. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
the default value of this parameter
is 8.
The value of this parameter must
be greater than or equal to the
value of
[GCELLHOAD:LOADHOSTEP].
287597
273357673.xlsx
06/12/2015
Cell
-Others:
1. If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM1,
this parameter is valid when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES or
[GCELLHOBASIC:INTRACELLFH
HOEN] is set to a value other than
NO.
If
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2,
this parameter is valid only when
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES.
2. This parameter is used with
[GCELLHOAD:CONTINTV] and
[GCELLHOAD:BANTIME] to limit
the frequency of intra-cell
handovers.
288597
273357673.xlsx
06/12/2015
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II).
289597
273357673.xlsx
06/12/2015
Cell
290597
273357673.xlsx
NO(No)
06/12/2015
Cell
291597
273357673.xlsx
06/12/2015
Cell
292597
273357673.xlsx
20
06/12/2015
Cell
293597
273357673.xlsx
06/12/2015
Cell
294597
273357673.xlsx
100
06/12/2015
Cell
295597
273357673.xlsx
75
06/12/2015
Cell
Cell
296597
273357673.xlsx
06/12/2015
Cell
297597
273357673.xlsx
06/12/2015
Cell
298597
273357673.xlsx
108
06/12/2015
Cell
299597
273357673.xlsx
NO(No)
06/12/2015
Cell
300597
273357673.xlsx
06/12/2015
Cell
301597
273357673.xlsx
15
YES(Yes)
06/12/2015
Cell
Cell
302597
273357673.xlsx
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
303597
273357673.xlsx
06/12/2015
Cell
Cell
304597
273357673.xlsx
OFF(Off)
Engineering Design
20
06/12/2015
Cell
Cell
305597
273357673.xlsx
06/12/2015
Cell
306597
273357673.xlsx
10
06/12/2015
Cell
Cell
307597
273357673.xlsx
06/12/2015
Cell
308597
273357673.xlsx
06/12/2015
Cell
309597
273357673.xlsx
10 Engineering Design
06/12/2015
Cell
310597
273357673.xlsx
20
06/12/2015
Cell
311597
273357673.xlsx
06/12/2015
Cell
312597
273357673.xlsx
06/12/2015
Cell
313597
273357673.xlsx
10
06/12/2015
Cell
314597
273357673.xlsx
06/12/2015
Cell
315597
273357673.xlsx
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II).
316597
273357673.xlsx
06/12/2015
Cell
317597
273357673.xlsx
06/12/2015
Cell
318597
273357673.xlsx
YES(Yes)
06/12/2015
Cell
-Others:
This parameter is valid only if
either of the following conditions is
met: 1.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM1(Handover
algorithm I). 2.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes).
319597
273357673.xlsx
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes) and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
320597
273357673.xlsx
06/12/2015
Cell
321597
273357673.xlsx
NO(No)
06/12/2015
Cell
322597
273357673.xlsx
06/12/2015
Cell
323597
273357673.xlsx
30
06/12/2015
Cell
324597
273357673.xlsx
06/12/2015
Cell
325597
273357673.xlsx
95
06/12/2015
Cell
326597
273357673.xlsx
06/12/2015
Cell
327597
273357673.xlsx
85
06/12/2015
Cell
328597
273357673.xlsx
14
06/12/2015
Cell
Cell
329597
273357673.xlsx
103
NO(No)
06/12/2015
Cell
Cell
330597
273357673.xlsx
06/12/2015
Cell
331597
273357673.xlsx
25
NO(No)
06/12/2015
Cell
Cell
332597
273357673.xlsx
55
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:BQHOEN] is
set to YES or
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and
[GCELLHOEMG:NODLMRHOEN]
is set to YES.
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to
HOALGORITHM2(Handover
algorithm II) and
[GCELLHOCTRL:BTSMESRPTP
REPROC] is set to
BSC_Preprocessing(BSC
preprocessing).
333597
273357673.xlsx
15
10
06/12/2015
Cell
Cell
334597
273357673.xlsx
63
06/12/2015
Cell
335597
273357673.xlsx
OFF(Off)
06/12/2015
Engineering Design
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2
and [GCELLHOBASIC:LoadHoEn]
is set to YES.
336597
273357673.xlsx
06/12/2015
Cell
337597
273357673.xlsx
06/12/2015
Cell
338597
273357673.xlsx
63
06/12/2015
Cell
339597
273357673.xlsx
ULBCCHPOWER(Underlaid
BCCH Power)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if all of
the following conditions are met:
1.
[GCELLPWRBASIC:PWRCTRLS
W] is set to PWR3 and
[GCELLPWR3:PWRCTRLOPTIMI
ZEDEN] is set to YES.
2.
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
3.
[GCELLOTHEXT:PCHOCMPCON]
is set to YES.
340597
273357673.xlsx
NO(No)
06/12/2015
Default/Recommended
Value
Cell
-Others:
This parameter is valid only if
[GCELLHOBASIC:INTRACELLHO
EN] is set to YES(Yes) and
[GCELLHOBASIC:HOCTRLSWIT
CH] is set to HOALGORITHM2.
341597
273357673.xlsx
Access
06/12/2015
Interruption Scope
N/A
342597
273357673.xlsx
06/12/2015
N/A
343597
273357673.xlsx
N/A
N/A
06/12/2015
344597
273357673.xlsx
06/12/2015
N/A
345597
273357673.xlsx
06/12/2015
N/A
346597
273357673.xlsx
06/12/2015
N/A
347597
273357673.xlsx
06/12/2015
N/A
348597
273357673.xlsx
06/12/2015
N/A
349597
273357673.xlsx
06/12/2015
N/A
350597
273357673.xlsx
06/12/2015
N/A
351597
273357673.xlsx
06/12/2015
N/A
352597
273357673.xlsx
06/12/2015
N/A
353597
273357673.xlsx
06/12/2015
N/A
354597
273357673.xlsx
N/A
N/A
06/12/2015
355597
273357673.xlsx
06/12/2015
N/A
356597
273357673.xlsx
06/12/2015
N/A
357597
273357673.xlsx
06/12/2015
N/A
358597
273357673.xlsx
06/12/2015
N/A
359597
273357673.xlsx
06/12/2015
N/A
360597
273357673.xlsx
06/12/2015
N/A
361597
273357673.xlsx
06/12/2015
N/A
362597
273357673.xlsx
06/12/2015
N/A
363597
273357673.xlsx
06/12/2015
N/A
364597
273357673.xlsx
06/12/2015
N/A
365597
273357673.xlsx
06/12/2015
N/A
366597
273357673.xlsx
06/12/2015
N/A
367597
273357673.xlsx
06/12/2015
N/A
368597
273357673.xlsx
06/12/2015
N/A
369597
273357673.xlsx
06/12/2015
N/A
370597
273357673.xlsx
06/12/2015
N/A
371597
273357673.xlsx
06/12/2015
N/A
372597
273357673.xlsx
06/12/2015
N/A
373597
273357673.xlsx
06/12/2015
N/A
374597
273357673.xlsx
06/12/2015
N/A
375597
273357673.xlsx
06/12/2015
N/A
376597
273357673.xlsx
06/12/2015
N/A
377597
273357673.xlsx
N/A
N/A
06/12/2015
378597
273357673.xlsx
06/12/2015
N/A
379597
273357673.xlsx
06/12/2015
N/A
380597
273357673.xlsx
06/12/2015
N/A
381597
273357673.xlsx
06/12/2015
N/A
382597
273357673.xlsx
06/12/2015
N/A
383597
273357673.xlsx
N/A
N/A
06/12/2015
384597
273357673.xlsx
06/12/2015
N/A
385597
273357673.xlsx
N/A
N/A
06/12/2015
386597
273357673.xlsx
N/A
N/A
06/12/2015
387597
273357673.xlsx
06/12/2015
N/A
388597
273357673.xlsx
N/A
N/A
06/12/2015
389597
273357673.xlsx
06/12/2015
N/A
390597
273357673.xlsx
06/12/2015
N/A
391597
273357673.xlsx
06/12/2015
N/A
392597
273357673.xlsx
06/12/2015
N/A
393597
273357673.xlsx
06/12/2015
N/A
394597
273357673.xlsx
06/12/2015
N/A
395597
273357673.xlsx
06/12/2015
N/A
396597
273357673.xlsx
06/12/2015
N/A
397597
273357673.xlsx
06/12/2015
N/A
398597
273357673.xlsx
06/12/2015
N/A
399597
273357673.xlsx
06/12/2015
N/A
400597
273357673.xlsx
06/12/2015
N/A
401597
273357673.xlsx
06/12/2015
N/A
402597
273357673.xlsx
06/12/2015
N/A
403597
273357673.xlsx
06/12/2015
N/A
404597
273357673.xlsx
06/12/2015
N/A
405597
273357673.xlsx
06/12/2015
N/A
406597
273357673.xlsx
06/12/2015
N/A
407597
273357673.xlsx
06/12/2015
N/A
408597
273357673.xlsx
06/12/2015
N/A
409597
273357673.xlsx
06/12/2015
N/A
410597
273357673.xlsx
N/A
N/A
06/12/2015
411597
273357673.xlsx
N/A
N/A
06/12/2015
412597
273357673.xlsx
06/12/2015
N/A
413597
273357673.xlsx
N/A
N/A
06/12/2015
414597
273357673.xlsx
N/A
N/A
06/12/2015
415597
273357673.xlsx
N/A
N/A
06/12/2015
416597
273357673.xlsx
06/12/2015
N/A
417597
273357673.xlsx
06/12/2015
N/A
418597
273357673.xlsx
06/12/2015
N/A
419597
273357673.xlsx
06/12/2015
N/A
420597
273357673.xlsx
06/12/2015
N/A
421597
273357673.xlsx
06/12/2015
N/A
422597
273357673.xlsx
06/12/2015
N/A
423597
273357673.xlsx
N/A
06/12/2015
Caution
None
Validation of Modification
424597
273357673.xlsx
N/A
06/12/2015
None
425597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
426597
273357673.xlsx
N/A
06/12/2015
None
427597
273357673.xlsx
N/A
06/12/2015
None
428597
273357673.xlsx
N/A
06/12/2015
None
429597
273357673.xlsx
N/A
06/12/2015
None
430597
273357673.xlsx
N/A
06/12/2015
None
431597
273357673.xlsx
N/A
06/12/2015
None
432597
273357673.xlsx
N/A
06/12/2015
None
433597
273357673.xlsx
N/A
06/12/2015
None
434597
273357673.xlsx
N/A
06/12/2015
None
435597
273357673.xlsx
N/A
06/12/2015
None
436597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
437597
273357673.xlsx
N/A
06/12/2015
None
438597
273357673.xlsx
N/A
06/12/2015
None
439597
273357673.xlsx
N/A
06/12/2015
None
440597
273357673.xlsx
N/A
06/12/2015
None
N/A
441597
273357673.xlsx
N/A
06/12/2015
None
N/A
442597
273357673.xlsx
N/A
06/12/2015
None
443597
273357673.xlsx
N/A
06/12/2015
None
444597
273357673.xlsx
N/A
06/12/2015
None
N/A
445597
273357673.xlsx
N/A
06/12/2015
None
N/A
446597
273357673.xlsx
N/A
06/12/2015
None
447597
273357673.xlsx
N/A
06/12/2015
None
N/A
448597
273357673.xlsx
N/A
06/12/2015
None
449597
273357673.xlsx
N/A
06/12/2015
If the value of
"Current HO
Control
Algorithm" in
"SET
GCELLHOB
ASIC" is
changed, the
The parameter modification has
value of this
no impact on the equipment.
parameter is
automatically
changed to
the default
value
correspondin
g to the
algorithm.
450597
273357673.xlsx
N/A
06/12/2015
If the value of
"Current HO
Control
Algorithm" in
"SET
GCELLHOB
ASIC" is
changed, the
The parameter modification has
value of this
no impact on the equipment.
parameter is
automatically
changed to
the default
value
correspondin
g to the
algorithm.
451597
273357673.xlsx
N/A
06/12/2015
None
452597
273357673.xlsx
N/A
06/12/2015
None
453597
273357673.xlsx
N/A
06/12/2015
None
454597
273357673.xlsx
N/A
06/12/2015
None
455597
273357673.xlsx
N/A
06/12/2015
None
456597
273357673.xlsx
N/A
06/12/2015
None
457597
273357673.xlsx
N/A
06/12/2015
None
458597
273357673.xlsx
N/A
06/12/2015
None
459597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
460597
273357673.xlsx
N/A
06/12/2015
None
461597
273357673.xlsx
N/A
06/12/2015
None
462597
273357673.xlsx
N/A
06/12/2015
None
463597
273357673.xlsx
N/A
06/12/2015
None
464597
273357673.xlsx
N/A
06/12/2015
None
465597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
466597
273357673.xlsx
N/A
06/12/2015
None
467597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
468597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
469597
273357673.xlsx
N/A
06/12/2015
None
470597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
471597
273357673.xlsx
N/A
06/12/2015
None
472597
273357673.xlsx
N/A
06/12/2015
None
473597
273357673.xlsx
N/A
06/12/2015
None
474597
273357673.xlsx
N/A
06/12/2015
None
475597
273357673.xlsx
N/A
06/12/2015
None
476597
273357673.xlsx
N/A
06/12/2015
None
477597
273357673.xlsx
N/A
06/12/2015
None
478597
273357673.xlsx
N/A
06/12/2015
None
479597
273357673.xlsx
N/A
06/12/2015
None
480597
273357673.xlsx
N/A
06/12/2015
None
481597
273357673.xlsx
N/A
06/12/2015
None
482597
273357673.xlsx
N/A
06/12/2015
None
483597
273357673.xlsx
N/A
06/12/2015
None
484597
273357673.xlsx
N/A
06/12/2015
None
485597
273357673.xlsx
N/A
06/12/2015
None
486597
273357673.xlsx
N/A
06/12/2015
None
487597
273357673.xlsx
N/A
06/12/2015
None
488597
273357673.xlsx
N/A
06/12/2015
None
489597
273357673.xlsx
N/A
06/12/2015
None
490597
273357673.xlsx
N/A
06/12/2015
None
491597
273357673.xlsx
N/A
06/12/2015
None
492597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
493597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
494597
273357673.xlsx
N/A
06/12/2015
None
495597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
496597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
497597
273357673.xlsx
N/A
None
N/A
None
06/12/2015
498597
273357673.xlsx
N/A
06/12/2015
None
499597
273357673.xlsx
N/A
06/12/2015
None
500597
273357673.xlsx
N/A
06/12/2015
None
501597
273357673.xlsx
N/A
06/12/2015
None
502597
273357673.xlsx
N/A
06/12/2015
None
503597
273357673.xlsx
N/A
06/12/2015
None
504597
273357673.xlsx
N/A
06/12/2015
None
505597
273357673.xlsx
06/12/2015
Introduced in Version
BSC6910 V100R015C00
Attribute
Radio
506597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
507597
273357673.xlsx
BSC6910 V100R015C00
Radio
BSC6910 V100R015C00
Radio
06/12/2015
508597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
509597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
510597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
511597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
512597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
513597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
514597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
515597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
516597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
517597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
518597
273357673.xlsx
BSC6910 V100R015C00
Radio
BSC6910 V100R015C00
Radio
06/12/2015
519597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
520597
273357673.xlsx
06/12/2015
Radio
521597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
522597
273357673.xlsx
06/12/2015
Radio
523597
273357673.xlsx
06/12/2015
Radio
524597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
525597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
526597
273357673.xlsx
06/12/2015
Radio
527597
273357673.xlsx
06/12/2015
Radio
528597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
529597
273357673.xlsx
06/12/2015
Radio
530597
273357673.xlsx
06/12/2015
Radio
531597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
532597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
533597
273357673.xlsx
06/12/2015
Radio
534597
273357673.xlsx
If this parameter is set to a small value, the interlayer load-based handover is likely to trigger in
the serving cell and MSs are likely to hand over to
BSC6910 V100R015C00
a neighboring cell of a low layer. If this parameter
is set to a large value, the inter-layer load-based
handover is unlikely to trigger in the serving cell.
06/12/2015
Radio
535597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
536597
273357673.xlsx
06/12/2015
Radio
537597
273357673.xlsx
06/12/2015
Radio
538597
273357673.xlsx
06/12/2015
Radio
539597
273357673.xlsx
06/12/2015
Radio
540597
273357673.xlsx
06/12/2015
Radio
541597
273357673.xlsx
Radio
Radio
06/12/2015
542597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
543597
273357673.xlsx
06/12/2015
Radio
544597
273357673.xlsx
06/12/2015
Radio
545597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
546597
273357673.xlsx
06/12/2015
Radio
547597
273357673.xlsx
Radio
None
Radio
06/12/2015
BSC6910 V100R015C00
548597
273357673.xlsx
06/12/2015
Radio
549597
273357673.xlsx
BSC6910 V100R015C00
Radio
BSC6910 V100R015C00
Radio
06/12/2015
550597
273357673.xlsx
None
BSC6910 V100R015C00
Radio
BSC6910 V100R015C00
Radio
06/12/2015
551597
273357673.xlsx
06/12/2015
Radio
552597
273357673.xlsx
BSC6910 V100R015C00
Radio
Radio
06/12/2015
553597
273357673.xlsx
06/12/2015
Radio
554597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
555597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
556597
273357673.xlsx
06/12/2015
Radio
557597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
558597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
559597
273357673.xlsx
06/12/2015
Radio
560597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
561597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
562597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
563597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
564597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
565597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
566597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
567597
273357673.xlsx
06/12/2015
Radio
568597
273357673.xlsx
06/12/2015
Radio
569597
273357673.xlsx
06/12/2015
Radio
570597
273357673.xlsx
06/12/2015
Radio
571597
273357673.xlsx
06/12/2015
Radio
572597
273357673.xlsx
06/12/2015
Radio
573597
273357673.xlsx
06/12/2015
Radio
574597
273357673.xlsx
None
BSC6910 V100R015C00
Radio
Radio
06/12/2015
575597
273357673.xlsx
Radio
None
Radio
06/12/2015
BSC6910 V100R015C00
576597
273357673.xlsx
06/12/2015
Radio
577597
273357673.xlsx
Radio
None
Radio
06/12/2015
BSC6910 V100R015C00
578597
273357673.xlsx
Radio
Radio
06/12/2015
579597
273357673.xlsx
BSC6910 V100R015C00
Radio
Radio
06/12/2015
580597
273357673.xlsx
06/12/2015
Radio
581597
273357673.xlsx
06/12/2015
BSC6910 V100R015C00
Radio
582597
273357673.xlsx
06/12/2015
Radio
583597
273357673.xlsx
None
06/12/2015
BSC6910 V100R015C00
Radio
584597
273357673.xlsx
06/12/2015
Radio
585597
273357673.xlsx
06/12/2015
BSC6910 V100R016C00
Radio
586597
273357673.xlsx
If this parameter is set to YES, intra-cell loadbased handovers between overlaid and underlaid
BSC6910 V100R015C00
subcells are precisely controlled to avoid pingpong handovers due to intra-cell load adjustment.
06/12/2015
Radio
587597
MO
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
G2GNCELL
Parameter ID
BETTERCELLLASTTIME
BETTERCELLSTATTIME
BQLASTTIME
BQSTATTIME
DRHOLEVRANGE
EDOUTHOOFFSET
HCSLASTTIME
HCSSTATTIME
TALASTTIME
TASTATTIME
ULBQLASTTIME
ULBQSTATTIME
Parameter Name
Better Cell HO Valid Time
Better Cell HO Watch Time
BQ HO Valid Time
BQ HO Watch Time
Directed Retry Handover Level Rang
Enhanced Outgoing Cell Handover O
HCS HO Valid Time
HCS HO Watch Time
TA HO Valid Time
TA HO Watch Time
UL BQ HO Last Time
UL BQ HO Static Time
GCELLCHMGHALFRATEREPACKINGSWITCH
TCHH Integration
GCELLHOADACCTHRESLAYER
GCELLHOADINTERFEREDLEVOFF
GCELLHOADINTERFEREDLEVOFFOL
GCELLHOADINTERFEREDLQUALOFFOL
GCELLHOADINTERFEREDQUALOFF
GCELLHOADINTERFEREULEVOFF
GCELLHOADINTERFEREULEVOFFOL
GCELLHOADINTERFEREULQUALOFFOL
GCELLHOADINTERFEREUQUALOFF
GCELLHOADINTERFEROFFSWITCHOL
GCELLHOADLOADHOHYSTADAPEN
GCELLHOADTRIGTHRESLAYER
GCELLHOBABETTERCELLHOEN
GCELLHOBAEDGEHOHYSTEN
GCELLHOBAEDGELAST
GCELLHOBAEDGESTAT
GCELLHOBAHOPRIOMODEN
GCELLHOBAINTERFERELASTTIME
GCELLHOBAINTERFERESTATTIME
GCELLHOBAINTRACELLFHOPTSWITCH
GCELLHOBAPATHLOSSHOEN
GCELLHOEMULQUALIMIT
GCELLHOFITINITUPFILEN
GCELLHOFITINTERFEREHOPENTIME
GCELLHOFITLOADHOPENTIME
GCELLHOFITLOADHOPENVALUE
GCELLHOFITLoadHoPunishInheritSwitch
GCELLHOFITNSIGSTRFLTLEN
GCELLHOFITTASIGSTRFLTLEN
GCELLHOIU ENUTOOLOADINILEV
GCELLHOIU IUOOlPowerCompPolicy
GCELLHOIU UOLOADOPTSWITCH
NE
MML Command Meaning
IsKey
Mandatory Feature ID Feature Name Value Type
ADD G2GNCELL
BSC6910
Period during NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
Period during NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
According to the P/N rule, if the conditions for emergency BQ handover are met in P of N measurem
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This
parameter
number
P. for emergency BQ handover are met in P of N measurem
ADD G2GNCELL
According
to thespecifies
P/N rule,the
if the
conditions
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This parameter specifies the number N. GBFD-110601HUAWEI I Handover
ADD G2GNCELL
BSC6910
Difference
bet
N
O
NO
Interval
Typeof "ULEDGETHRES
Uplink receive level of the serving cell after
power control compensation
< Value
MOD
G2GNCELL
GBFD-510501
Handover
ADD G2GNCELL
GBFD-110601HUAWEI
HUAWEI II
I Handover
BSC6910
Downlink receive
NO level of the
NO
serving cell after power control compensation
Interval<Type
Value of "DLEDGETHR
MOD
G2GNCELL
GBFD-510501
HUAWEI
Handover
ADD G2GNCELL
According
toofthe
P/N rule,
if the conditions
forhandovers
the handover
to
a IIdifferent
micro cell
to fast
move
In
the
case
Huawei
handover
algorithm
II,
to
a
better
neighboring
cell due
can be
triggered
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This
parameter
number
P. for the handover to a different micro cell due to fast move
ADD G2GNCELL
According
to thespecifies
P/N rule,the
if the
conditions
BSC6910
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
This parameter specifies the number N.
ADD G2GNCELL
BSC6910
The P/N crite NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
The P/N crite NO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
Period duringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD
G2GNCELL
ADD G2GNCELL
BSC6910
Period duringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
MOD G2GNCELL
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
SET GCELL
NO
This parameter
NO
GBFD-51050
HUAWEI II HaInterval Type
"RXQUALn"
(1
<= n <= 12):NO
used for non-AMR
FR calls.
The receive quality
NO equals the
NO sum of theGBFD-51050
value of "RXQUALn"
HUAWEIand
II Hathe
Interval
corresponding
Type
quality offset
GBFD-113201Concentric Cell
2
<=
n
<=
12
Downlink receNO
NO
Interval Type
HUAWEI
Handover
Downlink receive quality threshold offset GBFD-510501
GBFD-113201
for overlaid subcells
Concentric
in II
a Cell
concentric cell during the interfere
NO
Interval Type
"RXQUALn"
(1
<=
n <= 12):IINO
used
forand
non-AMR
FR calls.
When
handover
algorithm
is used
GBFD-510501
"INTERFEROFFSWITCHOL"
HUAWEI II Handover
is set to YES(Yes), the downl
The receive quality
NO
NO
sumforofnon-AMR
theGBFD-51050
value FR
of "RXQUALn"
HUAWEIand
II Hathe
Interval
corresponding
Type
quality offset
"RXQUALn"
(1
<= nequals
<= 12):the
used
calls.
2
<=receive
n <= 12quality
NO equals the
NO sum of theGBFD-51050
HUAWEIand
II Hathe
Interval
Type
The
value of "RXQUALn"
corresponding
quality offset
Uplink
level offset for overlaid subcells
GBFD-113201
in a concentric
Concentric
cell Cell
during the interference handover d
2 <= n receive
<= 12 NO
NO
Interval Type
When
algorithm
II is used
"INTERFEROFFSWITCHOL"
HUAWEI
II Cell
Handover
is set
YES(Yes),
the uplink
Uplink handover
receive quality
threshold
offsetand
forGBFD-510501
GBFD-113201
overlaid subcells
Concentric
in a concentric
celltoduring
the interference
NO
NO
Interval
Type
"RXQUALn"
(1 <=
n <= 12):II used
forand
non-AMR
FR calls.
When
handover
algorithm
is used
GBFD-510501
"INTERFEROFFSWITCHOL"
HUAWEI II Handover
is set to YES(Yes), the uplink
The receive quality
NO equals the
NO sum of theGBFD-51050
value of "RXQUALn"
HUAWEIand
II Hathe
Interval
corresponding
Type
quality offset
2 <= n <= 12
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
BSC6910
GBFD-113201Concentric Cell
SET GCELL Whether to usNO
NO
Enumeration
GBFD-510501HUAWEI II Handover
SET GCELL Whether to adj
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
SET GCELL Triggering thr NO
NO
GBFD-51050 HUAWEI II HaInterval Type
SET GCELLHWhether
ena
NO
GBFD-51050 HUAWEI II HaEnumeration
When thistoparameter
is set NO
to YES:
SET GCELLHFor an MS with
NOlow receiveNO
GBFD-51050
HUAWEI
II HaEnumeration
level, the receive
level of the
neighboring
cell must be greater than or eq
According to the P/N rule,
the
conditions for edge handover are met in P of N measurement report
is setifNO
to
NO:
SET GCELLHWhen this parameter
NO
GBFD-51050 HUAWEI II HaInterval Type
This
parameter
number
P. for edge handover are met in P of N measurement report
According
to thespecifies
P/N rule,the
if the
conditions
SET GCELLH
NO
NO
GBFD-51050 HUAWEI II HaInterval Type
This parameter specifies the number N.
SET GCELLHWhether to adj
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
SET GCELLHThe triggeringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
SET GCELLHThe triggeringNO
NO
GBFD-51050 HUAWEI II HaInterval Type
SET GCELLHWhether to opNO
NO
GBFD-51050 HUAWEI II HaEnumeration
SET GCELLHWhether to per
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
GBFD-110601HUAWEI I Handover
SET GCELL An emergencyNO
h
NO
Interval Type
GBFD-510501HUAWEI II Handover
SET GCELLHWhether the in
NO
NO
GBFD-51050 HUAWEI II HaEnumeration
GBFD-110601HUAWEI I Handover
SET GCELLHPeriod in whicNO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHAfter a load NO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHAfter a load NO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHWhether to ena
NO
NO
Enumeration
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHFor the purpos
NO
NO
Interval Type
GBFD-510501
Handover
GBFD-110601HUAWEI
HUAWEI II
I Handover
SET GCELLHWhen the netw
NO
NO
Interval Type
GBFD-510501HUAWEI II Handover
SET GCELLHInitial signal NO
NO
GBFD-11320 Concentric CeInterval Type
SET GCELLHLevel compens
NO
NO
GBFD-11320 Concentric CeEnumeration
SET GCELLHWhether to opNO
NO
GBFD-11320 Concentric CeEnumeration
GUI Value
Enumeration
Range
Number/Bit
Unit Actual Value Range
Default Value
Recommended
Initial
Value
Value SourceImpact
1~32
N/A
480ms
480~15360
4
4 Radio Planning
Cell
1~32
N/A
480ms
480~15360
6
6 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
0~128
N/A
dB
0~128
72
72 Radio Planning
Cell
0~127
N/A
None
-64~63
64
64 Radio Planning
Cell
1~16
N/A
0.5s
0.5~8
2
2 Radio Planning
Cell
1~16
N/A
0.5s
0.5~8
3
3 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
1~16
N/A
470ms; 480m480~7680(TC
1
1 Radio Planning
Cell
1~8
N/A
470ms; 480m480~3840(TC
1
1 Radio Planning
Cell
1~8
N/A
470ms; 480m480~3840(TC
1
1 Radio Planning
Cell
NO, YES
0~100
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
0~100
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
-30~30
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
None
dB
dB
dB
dB
dB
dB
dB
dB
NO(No)
NO(No)
100
0
0
0
0
10
0
0
0
0
-10
0
0
0
0
Default/Reco Cell
Parameter
Relationship
Service
Access
After
Interruption
Modification
Interruption
Scope Duration
Caution
Validation
Impact
of Modification
on Radio Network
Performance
This parameter
is
validInterrupted
only when [G2GNCELL:NCELLTYPE]
is set to(min)
HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If this parameter is set to a large
The
parameter
Read
will
be
&
WriteNo
set
with
(And
NULL
no
when
im
N/A
it
is
invalid.
N/A
None
The
parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The
parameter
Read
will
be
&
WriteNo
set
with
(And
NULL
no
when
im
N/A
it
is
invalid.
N/A
None
The
parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
this
parameter
is
set
to
a
If this parameter is set to a smal
large
-Others:
Read
& WriteNo
(And
no
imN/A
None
The parameter
The
will
be
set
with
NULL
when
it is invalid. N/A
This parameter
parameter
is valid
only
when
[G2GNCELL:NCELLTYPE]
is set to
HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
this
parameter
is
set
to
a
smal
If
this
parameter
is
set
to
a
large
-Others:
Read
&
WriteNo
(And
no
im
N/A
N/A
None
The
parameter
The
parameter
will
be
set
with
NULL
when
it
is
invalid.
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If this parameter
is set to a smal
-Others:
The
parameter
Read
will be
& WriteNo
set with (And
NULLno
when
imN/A
it is invalid. N/A
None
The parameter
None
The parameter will be set with NULL when it is invalid.
-Others:
Read
& WriteNo
imN/A
None
The parameter
None
The
parameter
will be
set with (And
NULLno
when
it is invalid. N/A
-Others:
If this parameter is set to a large
-Others:
Read
& WriteNo
imN/A
None
The parameter
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
If
is
to a
If this
this parameter
parameter
is set
set
a smal
large
This
parameter
is valid
only if [GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm
II)toand
[GC
-Others:
Read
&
WriteNo
(And
no
im
N/A
N/A
None
The
parameter
This parameter is valid only when [G2GNCELL:NCELLTYPE] is set to HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If
this
parameter
is
set
to
a
smal
If
this
parameter
is
set
to
a
large
This
parameter
is valid
only
if [GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm II) and [GC
Read
& WriteNo
(And
no
imN/A
None
The parameter
The parameter
will
be
set
with
NULL
when
it is invalid. N/A
This
parameter
is valid
only
when
[G2GNCELL:NCELLTYPE]
is set to
HANDOVERANDIBCANCELL,
HANDOVERNCELL.
If this parameter
is set to a smal
-Others:
Read
& WriteNo
imN/A
None
The parameter
None
The
will
set
NULL
when
itit is
The parameter
parameter
will be
be
set with
with (And
NULLno
when
is invalid.
invalid. N/A
If this parameter is set to a large
-Others:
-Others:
Read
& WriteNo
imN/A
None
The parameter
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
If
is
to a
If this
this parameter
parameter
is set
set
a smal
large
This
parameter
is valid
only if [GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm
II)toand
[GC
-Others:
Read
& WriteNo
(And no imN/A
N/A
None
The parameter
If this parameter is set to a smal
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
This
parameter is
valid only if
[GCELLHOB
ASIC:INTRA
CELLHOEN]
is set to
YES(Yes),
[GCELLHOB
ASIC:HOCT Read & WriteNo (And no imN/A
RLSWITCH]
is set to
HOALGORI
THM2, and
[GCELLCH
MGAD:TCH
LOADOPTS
WITCH] is
set to
ON(On).
N/A
None
The parameter
If this parame
-Others:
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this parame
-Others:
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A
N/A
None
is set to HOALGORITHM2(Handover
The parameter
None
algorithm II) and [G
-Others:
2. This parameter
is
used
with
"RXQUALn"
to
determine
the
interference
handover
threshold.
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2, [GCELLHOBASIC:INTERFHOE
-Others:
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
-Others:
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2, [GCELLHOBASIC:INTERFHOE
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A
N/A
None
is set to HOALGORITHM2(Handover
The parameter
None
algorithm II) and [G
-Others:
2.
with if(And
"RXQUALn"
the interference
handover
threshold.
Readis
WriteNo
no imN/Ato determine
N/A
None
The
parameter
None
1. This
This parameter
parameter
is&used
valid
only
[GCELLHOBASIC:HOCTRLSWITCH]
is set
to HOALGORITHM2(Handover
algorithm II) and [G
-Others:
2. This parameter
is
used
with
"RXQUALn"
to
determine
the
interference
handover
threshold.
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
Read & WriteNo (And no imN/A
N/A
None
N/A
The smaller th
-Others:
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
1. This parameter
Readis&valid
WriteNo
only if(And
[GCELLHOBASIC:HOCTRLSWITCH]
no imN/A
N/A
None
is set to HOALGORITHM2(Handover
The parameter
None
algorithm II) and [G
2. This parameter is used with "RXQUALn" to determine the interference handover threshold.
-Others:
Read & WriteNo (And no imN/A
N/A
None
N/A
If this parame
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] set to HOALGORITHM2 and [GCELLHOBASIC:INTERFHO
-Others:
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this param
This
parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II) and [GC
-Others:
Read & WriteNo
(And no imN/A
N/A
None
The parameter
If this parame
-Parameter
relationship
withifconditions:
This parameter
is valid only
[GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2(Handover algorithm II).
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
None
This parameter
is valid
only when
[GCELLHOBASIC:HOCTRLSWITCH]
-Others:
The parameter
will
be
set
with
NULL
when
it
is
invalid.
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
If this parame
This parameter
parameter
is valid
valid
only ifwhen
[GCELLHOBASIC:HOCTRLSWITCH]
This
is
only
[GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2.If this parameter is set to a large
The
parameter
Read
will
be
&
WriteNo
set
with
(And
NULL
no
when
im
N/A
it
is
invalid.
N/A
None
The
parameter
This parameter is valid only when [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The parameter
Read
will be
& WriteNo
set with (And
NULLno
when
imN/A
it is invalid. N/A
None
The parameter
If
this
parameter
is
set
to
a
smal
-Others:
-Others:
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
If this parame
This parameter
parameter
is valid
valid
only ifwhen
[GCELLHOBASIC:HOCTRLSWITCH]
This
is
only
[GCELLHOBASIC:HOCTRLSWITCH]
is set to HOALGORITHM2(Handover
algorithm
II).
If this parameter is set to a large
The
Read
will
be
& WriteNo
set
with
(And
NULL
no
when
imN/A
it is invalid. N/A
Noneis set to HOALGORITHM2.
The parameter
This parameter
parameter
is valid
only
when
[GCELLHOBASIC:HOCTRLSWITCH]
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
Read
& WriteNo
imN/A
None
The parameter
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
If
this
parameter
is
set
to
a
smal
-Others:
-Others:
Read
& WriteNo
(And
no imN/A
N/A
Noneis set to HOALGORITHM2.
The parameter
If this parame
This
parameter
is
valid
only
when
[GCELLHOBASIC:HOCTRLSWITCH]
This parameter is valid only if [GCELLHOBASIC:INTRACELLHOEN] is set to YES(Yes) and [GCELLHOBASIC:HOCTRLSWITC
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
Read
& WriteNo
imN/A
None
The parameter
None
-Others:
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this parame
This
parameter is valid only if [GCELLHOBASIC:BQHOEN] is set to YES or [GCELLHOBASIC:HOCTRLSWITCH] is set to HOA
-Others:
Read
&
WriteNo
(And
no
im
N/A
N/A
None
The
parameter
If this parame
This
[GCELLHOFITPEN:HOCTRLSWITCH]
to HOALGORITHM2.
This parameter
parameter is
is valid
valid only
only when
if [GCELLHOBASIC:HOCTRLSWITCH]
is set is
toset
HOALGORITHM2(Handover
algorithm II) and [GC
The
will
be
set
with
NULL
when
it is invalid. N/A
Read
& WriteNo
(And
no
imN/A
None is set toThe
parameter
If this parame
This parameter
parameter
is valid
only
when
[GCELLHOFITPEN:HOCTRLSWITCH]
HOALGORITHM2.
If this parameter is set to a large
-Others:
The
will
be
set
with
NULL
when
it is invalid. N/A
Read
& WriteNo
(And
no
imN/A
None is set toThe
parameter
This parameter
parameter
is valid
only
when
[GCELLHOFITPEN:HOCTRLSWITCH]
HOALGORITHM2.
If
If this
this parameter
parameter is
is set
set to
to a
a smal
large
-Others:
The parameter
will be
set with (And
NULLno
when
it is invalid. N/A
Read
& WriteNo
imN/A
None
The parameter
If
this
parameter
is
set
to
a
smal
-Others:
Read
& WriteNo
(And
no imN/A
N/A
None is set toThe
parameter
If this param
This
parameter
is
valid
only
when
[GCELLHOFITPEN:HOCTRLSWITCH]
HOALGORITHM2.
This parameter is valid only if [GCELLHOBASIC:HOCTRLSWITCH] is set to HOALGORITHM2 and [GCELLHOBASIC:LoadHo
The
parameter
will be
set
with
NULLno
when
it is invalid. N/A
Read
& WriteNo
(And
imN/A
None
The parameter
The value of
-Parameter
relationship
with
conditions:
-Others:
This
Read
is
& WriteNo
only
(And
[GCELLHOFITPEN:HOCTRLSWITCH]
no imN/A
N/A
None
is to
setHOALGORITHM2.
toThe
HOALGORITHM2.
parameter
None
This parameter
parameter
is valid
valid
only when
when
[GCELLHOIUO:HOCTRLSWITCH]
is set
The
parameter
will
be
set
with
NULL
when
it
is
invalid.
The
Read
will
be
& WriteNo
set
with
(And
NULL
no
when
imN/A
it is invalid.
N/A are met: None
The parameter
If this parame
This parameter
parameter
is valid
only
if all
of the
following
conditions
-Others:
1.
[GCELLPWRBASIC:PWRCTRLSW]
Read & WriteNo (And no im
isN/A
set to PWR3N/A
and [GCELLPWR3:PWRCTRLOPTIMIZEDEN]
None
The parameter
Setting this
is set to YES.
-Others:
2. [GCELLHOBASIC:HOCTRLSWITCH]
is
set
to
HOALGORITHM2.
Read & WriteNo (And no imN/A
N/A
None
The parameter
If this parame
This parameter is valid only if [GCELLHOBASIC:INTRACELLHOEN] is set to YES(Yes) and [GCELLHOBASIC:HOCTRLSWITC
Introduced in Version
Attribute
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio
BSC6910 V1 Radio