TQM & HR - Final
TQM & HR - Final
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Response is speed.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
The benefit of ISO 14001 are applicable to: the organization which adopts
it; adjacent property owner & environment
TQM & HR
26.
27.
Cause & effect diagram used to: identity & organize possible causes of
problem; identify possible causes of problem & determining its relation
28.
29.
30.
31.
32.
33.
34.
Process capability is only calculated when it qualify Bell shape curve. True
35.
36.
39.
40.
41.
42.
43.
44.
45.
46.
Drive out fear so that everyone may work effectively for the company. (A point
I Demings 14 point program).
47.
48.
The core processes are those which have a Direct contribution to the
business of an organization.
49.
Like you have internal customers there are internal suppliers too. True
50.
and
practical
guidelines
for
developing:
organizational
security
TQM & HR
52.
Soft domain consists of Software for using the machines and facilities to
achieve business objectives.
53.
54.
55.
will:
has expected
specific
properties;
generic
properties;
defining
properties
56.
57.
Quality costs or cost of quality or cost of poor quality are all: almost synonyms
58.
59.
60.
61.
62.
63.
64.
65.
66.
67.
The process is ingrained in the way work is performed and there is commitment
and thus consistency to perform the process that way only is termed as:
Institutionalization
Match the following:
Integrated supplier management
process management
Organization innovation and deployment
project management
Configuration management
technical purpose
Technical solution
engineering
70.
71.
72.
TQM & HR
73.
74.
75.
76.
77.
78.
79.
External environment consists of: land, water, air; natural resources, flora,
fauna
80.
Being capable is the quality of process and means that the process is able to
deliver the desired outcome.
81.
Select the contains required for relational data base for key measurements:
product; core or support behaviour; quality
82.
Annexure C of ISO 14001 deals with how to go about hazard identification and
the assessment and control of risk. True
83.
84.
Two headings under failure costs are, as in ASQC 1986 are: internal failure
costs; external failure costs
85.
86.
of
monitoring
and
measurement;
examining
compliance
88.
ISO 17799:2005 contains the best practices for control objectives and control in
the following areas of information security management: security policy;
organization of information security
89.
90.
91.
92.
TQM & HR
93.
94.
95.
96.
97.
The power base is not relevant in deciding the ability to take decisions and lead
the organization towards the desired change. True
98.
Quality is not an act, it is a habit, the statement was made by: Aristotle
101.
102.
103.
104.
105.
106.
107.
108.
The way people get led is the relationship between culture and leadership.
109.
The quality gurus have given an interpretation of TQM as: philosophy from a
specific angle; per ones experience in guiding organizations; standard
112.
113.
114.
TQM & HR
115.
Plan takes into account quality and time aspects for customer.
116.
The process means a sequence of activities for transforming input into output.
117.
118.
The common theme in quality are: quality is free, quality is in the process;
quality management itself is a process
119.
120.
121.
122.
123.
124.
planning and organizing for TQM includes: developing a clear long term
strategy for TQM process; developing prevention based activities;
defining an approach for developing a quality management system as a
tool to operate business with reference to strategy for business
125.
in ISO 14001 in paragraph of standard the requirement for planning the stages
are: identify environmental aspects; determine those that can have a
significant impact; understand the legal and other requirements
126.
127.
the core processes are those which have a direct contribution to the business
of an organisation.
128.
129.
130.
131.
132.
133.
134.
135.
136.
137.
TQM & HR
138.
the scope of audit during the audit of sales could be to examine: the customer
satisfaction; market research; contribution to the turnover
139.
140.
141.
142.
143.
144.
145.
146.
in hierarchy of human needs the need and desire for self-fulfillment, becoming
everything one is capable of becoming comes under self actualization.
147.
148.
in ISO 14001 in paragraph of standard the requirement for planning the stages
are: define target to be achieved to meet policy; assign responsibilities
and resources too; state clearly the time frame for achieving
149.
150.
151.
each process area has components under three headings that is: required;
expected; informative
152.
153.
the management practices on the appraisal results are very important on the
three aspects at the organisational level which are: retaining people with
skills and competencies; reinforcing values and thus a work culture of
quality performance; maintaining a high motivation at all levels in that
organisation
154.
155.
156.
each
process
area
has
required
components
that
describes
what
an
the use of a CMMI model for the purpose of making it suitable for a specific
application. To align application of a model to an organisations business is termed
as: CMMI model tailoring
158.
TQM believes and propagates that quality, like the business process, is in
sequence form.
159.
160.
TQM & HR
161.
162.
163.
164.
165.
166.
Crosby introduced the idea of The quality management grid: this is one of
his 14 point program
167.
supplier
agreement
management
comes
under
category
of:
project
management
168.
169.
170.
171.
failure costs are incurred because = the defects are removed by way
172.
173.
174.
175.
176.
177.
178.
179.
180.
181.
182.
183.
184.
185.
186.
187.
TQM & HR
188.
189.
190.
191.
192.
the business is likely to ignore local concerns such as: political scenario; the
environment; the culture
193.
194.
195.
196.
the measurement plan must address all the processes = and reports as in
MIS defined for
197.
198.
199.
200.
201.
the future picture in the vision: demands that the organization moves
towards it
202.
because there are levels of processes, there are levels in the organization or
management. True
203.
204.
205.
206.
guideline to be followed for preparing the flow charts is to involve people who
carry out parts.
207.
top management of Karnataka Steel Ltd. Being concerned about the welfare of
workers.
208.
209.
you walk the talk and: people demonstrate alignment to what you ask for
a define indication to high morale; create an organizational culture;
you are instrumental in establishing a behaviour pattern
210.
211.
212.
213.
some areas for which management needs decisions are: range of product
and service; finance, pricing
TQM & HR
214.
215.
216.
217.
the quality gurus have given an interpretation of TQM as: philosophy from a
specific angle; per ones experience in guiding organisations; standard
218.
219.
220.
the
first
step
in
understanding
the
intervention
by
HR
processes
in
222.
223.
224.
Internalization
is
summation
of
the
Psychological
characteristics
of
organisational culture.
225.
226.
227.
228.
229.
TQM & HR
232.
Time required to complete on order or one production lot or one project for
design, after which the next similar set of activities can start is termed as Cycle
time.
233.
234.
235.
the constraints business can encounter can be summarized into 7 Ms. True
236.
Dr. Peter Drucker says on organisation design that how the culture is built
depends upon what results are needed.
237.
238.
239.
240.
Mount Consulting Service Pvt. Ltd provides process consultancy for quality
models like ISO 9001 and CMMI.
241.
242.
243.
244.
245.
246.
247.
248.
The statistical tools have the roles: data collection; data processing;
summarizing of data
249.
War and business are names of the same conflict operations. True
250.
From quality management view and from the point of excelling in business,
before deciding to launch product/service any analysis of process must result in
providing information on: our capacity to provide the output required;
efforts and time required; knowledge of competency
251.
Your thinking and ideas need to be developed as the subject of quality: has a
strategic impact on business performance
254.
255.
256.
Customer is: one who pays for product or service; an end user; internal
TQM & HR
257.
258.
259.
260.
261.
Reliability, defects and defect removal efficiency are examples of: Process
Measures
262.
Good
quality
product/service
gets
marketed
by
its
qualities
such
as:
Like you have internal customers there are internal suppliers too. True
264.
265.
266.
267.
True/False
Question
ISO is Quality management system.
Correct Answer
True
Multiple Choice Single Answer
Question
Evolution of quality concept. Current era is
Correct Answer
Continual Improvement
Multiple Choice Multiple Answer
Question
Service Assurance is :Correct Answer
Confidence with customer , Customer have trust , Employee have
knowledge
Multiple Choice Single Answer
Question
TQM is a:Correct Answer
Philosophy
Multiple Choice Multiple Answer
Question
Cause & Effect diagram used to :Correct Answer
Identify & organize possible causes of problem , Identify possible causes
of problem & determining its relation
Select The Blank
Question
________ helps organization reduce employee turnover and absenteeism.
Correct Answer
Training & development
Multiple Choice Single Answer
Question
In statistical quality control, primary concern is :Correct Answer
Control
Multiple Choice Single Answer
Question
The management review is carried :-
TQM & HR
Correct Answer
To ensure effectiveness Of QMS
Select The Blank
Question
While calculating PPK standard deviation is________.
Correct Answer
Calculated
True/False
Question
Quality circle benefit to Employee.
Correct Answer
True
Select The Blank
Question
While calculating CPK standard deviation is________.
Correct Answer
Estimated
Multiple Choice Multiple Answer
Question
How TQM helps in reducing cost?
Correct Answer
By reducing internal failure , By reducing external failure cost
Select The Blank
Question
Working together for excellence is ________.
Correct Answer
Team work
True/False
Question
TQM & ISO both focuses on employee.
Correct Answer
False
Match The Following
Question
Correct Answer
Your Answer
Overhead
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
True/False
Question
The need for TQM is due to Cut throat competition.
Correct Answer
True
Multiple Choice Multiple Answer
Question
Multi- disciplinary approach means :Correct Answer
People from different discipline in organization , People from different
department having diff skill
Select The Blank
Question
Arrow indicates ________.
Correct Answer
Direction of flow
Select The Blank
Question
The TQM approach is based on employee's ________.
Correct Answer
Participation
Multiple Choice Single Answer
TQM & HR
Question
Correct Answer
Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question
Reliability of product means :Correct Answer
Consistency of performance , Performance over period
Multiple Choice Multiple Answer
Question
Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
Multiple Choice Multiple Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect , Action on only detected defect
Select The Blank
Question
Response is________.
Correct Answer
Speed
True/False
Question
The European award uses the criteria of efficiency & effectiveness.
Correct Answer
True
Select The Blank
Question
Process Quality planning means ________.
Correct Answer
Building quality into processes
Multiple Choice Multiple Answer
Question
Does TQM approach have relevance to Indian industry in context to
Correct Answer
People involvement , Customer satisfaction
Multiple Choice Multiple Answer
Question
Process evaluation is to identify :Correct Answer
Potential failure prevention , Correctness of product
Select The Blank
Question
The planning & implementing Enviromental policy is responsibility
of________
Correct Answer
Management representative.
Multiple Choice Single Answer
Question
The management review to be conducted :Correct Answer
As & when required
Multiple Choice Multiple Answer
Question
The evaluation & selection of vendor :Correct Answer
Must have predetermined procedure , Must be assessed
Multiple Choice Single Answer
Question
The evaluation & selection of vendor :Correct Answer
Must have procedure for it
TQM & HR
Multiple Choice Single Answer
Question
Environment policy must contain :Correct Answer
Mission & core values with respect to the enviroment
Multiple Choice Single Answer
Question
According to traditional thinking, quality improvement leads to :Correct Answer
Lower productivity
Multiple Choice Multiple Answer
Question
The mean is :Correct Answer
Center of process , Target of process
Multiple Choice Single Answer
Question
TQM approach is:Correct Answer
Centered on quality
True/False
Question
Leadership from top should be totally honest & transparent in dealing .
Correct Answer
True
True/False
Question
Quality approach is potential failure prevention.
Correct Answer
True
Multiple Choice Single Answer
Question
According to Deming quality improvement is analogous :Correct Answer
To reduction of Variation
True/False
Question
The ISO is based on Plan - do - check- Act.
Correct Answer
True
Select The Blank
Question
The Design & Development Review to be carried ________
Correct Answer
To evaluate ability of product to meet requirements
Multiple Choice Multiple Answer
Question
Which are pillar of Tqm :Correct Answer
Morale , Delivery
Select The Blank
Question
TQM emphasises on ________.
Correct Answer
Small improvement
Multiple Choice Single Answer
Question
In Quality circle, which problems are solved?
Correct Answer
Work related
Multiple Choice Multiple Answer
Question
Following are the phases of intervention:-
TQM & HR
Correct Answer
Formulation stage , Maintenance stage , Implementation stage
Multiple Choice Multiple Answer
Question
Leadership style from top to bottom is :Correct Answer
Totally honest & transparent , Providing consistent vision / direction
Multiple Choice Multiple Answer
Question
Tqm focus on :Correct Answer
Employee , Customer
Multiple Choice Multiple Answer
Question
While recruiting person he should
Correct Answer
Competent to perform job , Trained to perform specified job
Multiple Choice Multiple Answer
Question
Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
Match The Following
Question
Correct Answer
Your Answer
Cost reduction
Software organization
Correct Answer
Enhancing customer satisfaction , Delighting customer
Multiple Choice Single Answer
Question
Strategic quality management means :Correct Answer
Strategic Improvement
Multiple Choice Multiple Answer
Question
Process evaluation is to identify :Correct Answer
Potential failure prevention , Correctness of product
True/False
Question
CPK is 1' 33 means 64 PPM.
Correct Answer
True
True/False
Question
TQM & ISO both focuses on employee.
Correct Answer
False
Select The Blank
Question
While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
TQM & HR
Select The Blank
Question
________ helps organization reduce employee turnover and absenteeism.
Correct Answer
Training & development
Multiple Choice Single Answer
Question
The management review is carried :Correct Answer
To ensure effectiveness Of QMS
Multiple Choice Single Answer
Question
While setting Quality objective, What is to be consider :Correct Answer
Customer need
True/False
Question
By Applying basic principle, the process improvement will be in
organization's focuses on work process.
Correct Answer
True
Multiple Choice Single Answer
Question
ISO - 14001 is :Correct Answer
Powerful management tool to be used by an organisation to control the
environmental hazards.
Select The Blank
Question
________ is responsible for quality objective.
Correct Answer
Top management
Multiple Choice Single Answer
Question
What is CMM ?
Correct Answer
Capability maturity model
Multiple Choice Single Answer
Question
According to Deming, Quality problems are :Correct Answer
Due to management
Select The Blank
Question
________organisations are not eligible for MBNQA.
Correct Answer
Software
Multiple Choice Single Answer
Question
ISO 14001 is the management representative, responsible for :Correct Answer
Planning and implementing policy
Multiple Choice Multiple Answer
Question
Does TQM approach have relevance to Indian industry in context to
Correct Answer
Customer satisfaction , People involvement
Multiple Choice Single Answer
Question
Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer
Total quality management
True/False
Question
Business objectives are derived from mission statement.
TQM & HR
Correct Answer
True
Multiple Choice Multiple Answer
Question
By Applying basic principle the process improvement will be in
organization's :Correct Answer
Focus on work process , Maintain self esteem of other
True/False
Question
The European award uses the criteria of efficiency & effectiveness.
Correct Answer
True
Select The Blank
Question
Reputation means________.
Correct Answer
Past performance
Multiple Choice Multiple Answer
Question
While setting Goal ,following things to be consider.
Correct Answer
Marketability of product , Organization need
Multiple Choice Single Answer
Question
Integrity means :Correct Answer
True to our words
Multiple Choice Single Answer
Question
Documents in company are controlled by :Correct Answer
Management Representative.
Multiple Choice Multiple Answer
Question
PP & PPK is calculated for :Correct Answer
Initial production run , Initial process setting
Select The Blank
Question
TQM promotes________
Correct Answer
Team work
Select The Blank
Question
The planning & implementing Enviromental policy is responsibility
of________
Correct Answer
Management representative.
Multiple Choice Single Answer
Question
In Quality circle, which problems are solved?
Correct Answer
Work related
Select The Blank
Question
Payment Against warranty is________.
Correct Answer
External failure cost
True/False
Question
The role of management in QMS is to provide resources.
Correct Answer
True
True/False
TQM & HR
Question
Correct Answer
True
Select The Blank
Question
Quality means________.
Correct Answer
Fitness for use
True/False
Question
Zero Deviation means product is set on mean.
Correct Answer
True
Multiple Choice Multiple Answer
Question
The competence of the employee means :Correct Answer
Competence of personnel performing work affective quality , Evaluale
the effectiveness of action taken , Maintain appropriate Record
Multiple Choice Multiple Answer
Question
Employee should be involved in :Correct Answer
Decision making , Participation
Select The Blank
Question
The supplier must provided ________ information to management.
Correct Answer
Adequate
True/False
Question
Quality approach is continual improvement.
Correct Answer
True
Select The Blank
Question
TQM emphasises on ________.
Correct Answer
Small improvement
True/False
Question
Value is for which customer is paying.
Correct Answer
True
Multiple Choice Single Answer
Question
What is quality policy?
Correct Answer
Overall intention & direction of organization towards quality
Multiple Choice Multiple Answer
Question
Special characteristic means :Correct Answer
Product characteristic which affect fit/ function / Regulation ,
Characteristic of product which are regulatory requirement.
True/False
Question
Recruitment & Selection are critical HR issue.
Correct Answer
True
True/False
Question
Enviromental impact is any change to the environment, whether adverse
or beneficial.
TQM & HR
Correct Answer
True
Multiple Choice Multiple Answer
Question
Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
Select The Blank
Question
The documents of external origin ________
Correct Answer
Should be controlled separately
True/False
Question
The soft side of TQM include Training on job
Correct Answer
True
Multiple Choice Single Answer
Question
TQM is aiming :Correct Answer
Long term success
Select The Blank
Question
In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
True/False
Question
Training helps organization Reduces employee' turnover.
Correct Answer
True
Multiple Choice Single Answer
Question
CMM is use for :Correct Answer
Managing software project
Multiple Choice Single Answer
Question
In business, vision involve :Correct Answer
Mission statement
Multiple Choice Single Answer
Question
Which is not part of cost of poor quality ?
Correct Answer
Appraisal cost
Multiple Choice Single Answer
Question
Dr. Deming Believes that :Correct Answer
Quality & Productivity walk in hands
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Select The Blank
Question
Planning of internal hazardous material & its disposal________.
Correct Answer
Contains Planing aspect
Multiple Choice Multiple Answer
TQM & HR
Question
Correct Answer
Organisation , Employee
True/False
Question
Failure mode & effect Analysis is prevention tool.
Correct Answer
True
Select The Blank
Question
While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
Select The Blank
Question
________ is responsible for quality objective.
Correct Answer
Top management
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
True/False
Question
ISO calls for Product approach.
Correct Answer
False
True/False
Question
Enviroment indudes natural resources.
Correct Answer
True
True/False
Question
ISO - 9000 -2000 this revision of ISO is currently in use.
Correct Answer
True
Select The Blank
Question
Model used in software industry to check the quality is called________
Correct Answer
Capability maturity model
Multiple Choice Multiple Answer
Question
Need for Tqm is due :Correct Answer
Cut throat competition , Customer requirement
Multiple Choice Single Answer
Question
What is quality policy?
Correct Answer
Overall intention & direction of organization towards quality
Match The Following
Question
Correct Answer
Your Answer
To prevent defect
Ishikawa development
Common causes
TQM & HR
Crosby's objective of quality
Histogram
Correct Answer
Your Answer
Dimension
Physical facility
Service characteristic
Physical facility
TQM & HR
Multiple Choice Multiple Answer
Question
The inviromental policy must contain & communicate the :Correct Answer
Mission & value with respect to enviroment , Control & improve
enviroment , Enviromental impact
Multiple Choice Multiple Answer
Question
The Quality problems arises :Correct Answer
Due to management , Due to Employee
Multiple Choice Multiple Answer
Question
Bar chart is :Correct Answer
Frequency Distribution tool , Data analysis tool
Multiple Choice Multiple Answer
Question
Competitive advantage will be achieved by :Correct Answer
Serving customer in excellent fashion , Get in pat from customer &
convert in service , Technological improvement
Select The Blank
Question
Diamond represent ________ while plotting flow chart.
Correct Answer
Decision point
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Multiple Choice Single Answer
Question
Which of the following is not process input?
Correct Answer
Testing
Multiple Choice Single Answer
Question
Before Accepting the order :Correct Answer
It should be reviewed
Multiple Choice Multiple Answer
Question
The role of management is :Correct Answer
To provide Resources , To define EMS , To monitor the effectiveness of the
system
Multiple Choice Multiple Answer
Question
Cost of poor quality comprises :Correct Answer
Cost of internal failure , Cost of external failure
Multiple Choice Single Answer
Question
The quality manual have :Correct Answer
Level 3
True/False
Question
ISO 9000 & TQM are supportive to each other.
Correct Answer
True
Multiple Choice Multiple Answer
TQM & HR
Question
Correct Answer
Identify & organize possible causes of problem , Identify possible causes
of problem & determining its relation
True/False
Question
European award is given to any country.
Correct Answer
False
Multiple Choice Single Answer
Question
TQM focuses on :Correct Answer
Customer
True/False
Question
The quality manual have one Level.
Correct Answer
False
Select The Blank
Question
The planning & implementing Enviromental policy is responsibility
of________
Correct Answer
Management representative.
Select The Blank
Question
The documents of external origin ________
Correct Answer
Should be controlled separately
True/False
Question
Quality is fitness for Purpose
Correct Answer
True
Select The Blank
Question
Rectangle represent ________ While plotting flow chart.
Correct Answer
Steps in Activity
True/False
Question
Failure mode & effect Analysis is prevention tool.
Correct Answer
True
Select The Blank
Question
Response is________.
Correct Answer
Speed
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Select The Blank
Question
In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
Match The Following
Question
Correct Answer
Your Answer
Quality approch
Continiual improvement
TQM & HR
management
Pillor of TQM
-Delivery
TQM focusses on
Employee
True/False
Question
The performance of process is in controlled condition then it is called
process at managed level.
Correct Answer
False
Multiple Choice Single Answer
Question
What is part of cost of poor quality?
Correct Answer
External failure cost
Select The Blank
Question
________ provides the competitive advantage.
Correct Answer
Serving customer in excellent fashion
Multiple Choice Multiple Answer
Question
Following are the phases of intervention:Correct Answer
Formulation stage , Maintenance stage , Implementation stage
Multiple Choice Single Answer
Question
In ISO the focus is on :Correct Answer
Enhancing customer satisfaction
Multiple Choice Single Answer
Question
The variability in process is reduced, then the process become more :-Correct Answer
Predictable
Multiple Choice Single Answer
Question
What is document control?
Correct Answer
Document Required by EMS to be controlled
True/False
Question
ISO - 9000 -2000 this revision of ISO is currently in use.
Correct Answer
True
Multiple Choice Multiple Answer
Question
CMM is nothing but :Correct Answer
Use of process means , Capability maturity model
True/False
Question
Quality circle benefit to Employee.
Correct Answer
True
Multiple Choice Multiple Answer
Question
CP & CPK is calculated :Correct Answer
To predict future process , To predict future product performance
Select The Blank
TQM & HR
Question
Correct Answer
Potential failure prevention
Select The Blank
Question
________ helps organization reduce employee turnover and absenteeism.
Correct Answer
Training & development
Multiple Choice Single Answer
Question
ISO 14001 is the management representative, responsible for :Correct Answer
Planning and implementing policy
Multiple Choice Single Answer
Question
The human Resource :Correct Answer
Must be competent
Multiple Choice Multiple Answer
Question
Common elements of winners are :Correct Answer
Senior management was actively involved , Control of overall process ,
Focus on customer
Multiple Choice Multiple Answer
Question
Reliability of product means :Correct Answer
Consistency of performance , Performance over period
Multiple Choice Single Answer
Question
What CPL indicates ?
Correct Answer
Process capability relative to lower specification limit
Match The Following
Question
Correct Answer
Circle symbol
Pareto analysis is
X bar means
Average of reading
LCT means
Delay in Activity
Your Answer
TQM & HR
Correct Answer
The process of controlling environment
Multiple Choice Single Answer
Question
By adopting TQM philosophy, it benefits to :Correct Answer
Organisation & employee
Multiple Choice Multiple Answer
Question
Tqm focus on :Correct Answer
Employee , Customer
Select The Blank
Question
Reputation means________.
Correct Answer
Past performance
True/False
Question
In TQM, approach to employee is to involve people.
Correct Answer
True
Multiple Choice Single Answer
Question
When the process is called under control?
Correct Answer
When it is within specification
True/False
Question
Recruitment & Selection are critical HR issue.
Correct Answer
True
Multiple Choice Multiple Answer
Question
Benefit of model based improvement are :Correct Answer
Establish common language , Models are comprehensive
Multiple Choice Multiple Answer
Question
Common features of CMM is how to produce software product which
are :Correct Answer
Consistence , Repeatable , Predictable
Select The Blank
Question
The base of Tqm is________
Correct Answer
Employee involvement
True/False
Question
Each Environmental objective must be traceable back to the
Environmental Policy statement.
Correct Answer
True
Multiple Choice Single Answer
Question
What is environment?
Correct Answer
Surrounding in which an organization operates.
Multiple Choice Single Answer
Question
Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer
Total quality management
Match The Following
TQM & HR
Question
Correct Answer
Your Answer
ISO emphasis on
Prevention
Prevention
ISO
Lead assessor
TQM & HR
Correct Answer
Prevention
Select The Blank
Question
________ is a strategic effort, directed at attaining business objective,
through preventive action.
Correct Answer
Quality
Multiple Choice Multiple Answer
Question
In ISO the focus is on :Correct Answer
Enhancing customer satisfaction , Delighting customer
Multiple Choice Multiple Answer
Question
ISO - 14001 gives stress on :Correct Answer
Plan - Do -check -Act , Enviromental protection , Prevention rather than
detection
Multiple Choice Single Answer
Question
Which is not Business objectivity?
Correct Answer
Supplier satisfaction
True/False
Question
The soft side of TQM include Training on job
Correct Answer
True
Select The Blank
Question
Tool is used in TQM implementation is ________.
Correct Answer
P -D - C - A
Select The Blank
Question
Knowing capability of any process is required to ________.
Correct Answer
Predict the behavior of process
Select The Blank
Question
________ is the machine down time.
Correct Answer
Waste
Multiple Choice Single Answer
Question
Before Accepting the order :Correct Answer
It should be reviewed
True/False
Question
The European award uses the criteria of efficiency & effectiveness.
Correct Answer
True
Select The Blank
Question
When the process is ________ then it is under control.
Correct Answer
Within specification
True/False
Question
The main business process objective is to serve the customer in excellent
manner.
Correct Answer
True
Select The Blank
TQM & HR
Question
Correct Answer
Adequate
Multiple Choice Multiple Answer
Question
The inviromental policy must contain & communicate the :Correct Answer
Mission & value with respect to enviroment , Control & improve
enviroment , Enviromental impact
Multiple Choice Multiple Answer
Question
Quality circle encourage :Correct Answer
Tem work , Participation
Multiple Choice Multiple Answer
Question
Service Assurance is :Correct Answer
Confidence with customer , Customer have trust , Employee have
knowledge
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Multiple Choice Multiple Answer
Question
The management review to be conducted :Correct Answer
At predetermined Interval , As & when required
Multiple Choice Single Answer
Question
Process Quality planning means :Correct Answer
Building quality into processes
Multiple Choice Single Answer
Question
Control chart shows :Correct Answer
Performance of process
Multiple Choice Multiple Answer
Question
Which are pillar of Tqm :Correct Answer
Morale , Delivery
Multiple Choice Multiple Answer
Question
Zone in Tolerance means :Correct Answer
Gap between adequate service & desired service , Gap between min &
max expectation
True/False
Question
Quality policy is defined by employee of organisation
Correct Answer
False
Multiple Choice Single Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect
Multiple Choice Single Answer
Question
Who is responsible for Deploying quality policy?
Correct Answer
Top management
TQM & HR
Multiple Choice Multiple Answer
Question
Does TQM approach have relevance to Indian industry in context to
Correct Answer
Customer satisfaction , People involvement
True/False
Question
TQM approach is based on Participation.
Correct Answer
True
Multiple Choice Single Answer
Question
ISO 9000 & TQM are :Correct Answer
Supportive to each other
Select The Blank
Question
While calculating CPK standard deviation is________.
Correct Answer
Estimated
True/False
Question
Bar chart shows how data is spread across the range.
Correct Answer
True
Multiple Choice Multiple Answer
Question
Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
True/False
Question
There is a growing awareness by employers of the value of the employer
`Brand'.
Correct Answer
True
Your Answer True
Multiple Choice Single Answer
Question
The following personality holds the view that HRD is a developmental
oriented planned effort in the personnel area :Correct Answer
C S Sanker
Multiple Choice Single Answer
Question
HRD is a total system with various :Correct Answer
Sub systems
Select The Blank
Question
Occasionally, learning curves show ________, which are the areas in the
learning curve which indicate no progress in learning.
Correct Answer
Plateaus
Multiple Choice Single Answer
Question
One of the advantages of 360 degree appraisals is that :Correct Answer
It reduces bias / prejudice
Multiple Choice Multiple Answer
Question
The model of planning as a people process has benefits to :-
TQM & HR
Correct Answer
Groups , Divisions , Constituent companies
Multiple Choice Single Answer
Question
The following is not an essential objective of HRD :Correct Answer
To minimize the utilization of human resources for the achievement of
individual
True/False
Question
Different application forms may be necessary for different kinds of work.
Correct Answer
True
Multiple Choice Single Answer
Question
The very purpose of worker being at workplace is his :Correct Answer
Work
Multiple Choice Multiple Answer
Question
In Results Method to appraisals, Manager can consider results in form
of :Correct Answer
Sales figures , Production output
Match The Following
Question
Correct Answer
Your Answer
Forecasts
Based on measures of
Based on measures of
productivity
productivity
Estimate made by management
Simplest method of assessment
Simplest method of assessment
Statistical method
Work study method
TQM & HR
Correct Answer
Commitment
True/False
Question
Employees of an organisation cannot participate in HRD audit. It is
concerned only with top management's views and goals.
Correct Answer
False
True/False
Question
Organisational change through continuous learning is necessary for
organisations to survive in today's world.
Correct Answer
True
Select The Blank
Question
Performance Ratings must be ________.
Correct Answer
Job related
Multiple Choice Multiple Answer
Question
Job data on features of the job can be collected from :Correct Answer
Employees who perform the job , Other employees who watch the
workers , Trade job analysts
True/False
Question
One of the reasons for delayed improvement of QWL is lack of
consciousness among employees.
Correct Answer
True
Multiple Choice Multiple Answer
Question
HRD at organisational level talks of :Correct Answer
Organisation's manpower planning , Training , Performance appraisal
True/False
Question
A trainer should concentrate developmental activities on category of
"Problem Children" to get best results.
Correct Answer
True
Multiple Choice Single Answer
Question
HRD has become a popular concept now, particularly in the :Correct Answer
Business world
Multiple Choice Single Answer
Question
HR Manager has to consider these dimensions while planning for career
developmental activities:Correct Answer
Age & Performance
Multiple Choice Single Answer
Question
Balancing the cost between the utilization of plant & work force is
especially important :Correct Answer
When costing projects
Match The Following
Question
Correct Answer
Your Answer
TQM & HR
Sensitivity training
TQM & HR
Select The Blank
Question
Organizations should take positive measures to facilitate ________ of new
employees through Induction.
Correct Answer
Social adaptation
Multiple Choice Single Answer
Question
Management succession is a direct responsibility of :Correct Answer
CEO & Top Management
Multiple Choice Multiple Answer
Question
If Appraisals are not conducted properly, it can lead to :Correct Answer
Wastage of time , Feeling of frustration , Strategic failure
Multiple Choice Single Answer
Question
A well designed training programme :Correct Answer
Is planned in logical manner
True/False
Question
Good HRD practices do not make any difference on many counts.
Correct Answer
False
Multiple Choice Single Answer
Question
The Personnel needs of an organisation are identified in :Correct Answer
Human resource planning
Select The Blank
Question
The drawbacks of skill-based pay schemes are ________ and the lack of
performance contingency.
Correct Answer
Tendency to "Top out"
True/False
Question
Training helps organization Reduces employee' turnover.
Correct Answer
True
Multiple Choice Multiple Answer
Question
The customer requirement to be reviewed :Correct Answer
Before supply of product , Before commitment of supply of product
Match The Following
Question
Correct Answer
Your Answer
Dimension
Physical facility
Physical facility
Service characteristic
TQM & HR
Question
Correct Answer
Japan
True/False
Question
The European award uses the criteria of efficiency & effectiveness.
Correct Answer
True
True/False
Question
Quality is fitness for Purpose
Correct Answer
True
Select The Blank
Question
________ is important in providing some underpinning of the sense of
shared responsibility.
Correct Answer
Single status
Multiple Choice Single Answer
Question
Vender Assessment is :Correct Answer
Appraisal cost
Multiple Choice Multiple Answer
Question
Continual improvement is in :Correct Answer
Enviromental objective , Audit Result , Corrective action
True/False
Question
Prevention of pollution is prevention of cause of pollution.
Correct Answer
True
True/False
Question
ISO - 9000 -2000 this revision of ISO is currently in use.
Correct Answer
True
Select The Blank
Question
The primary responsibility of human Resource is ________
Correct Answer
To provide competent person
Select The Blank
Question
ISO - 9000- 1994 is ________
Correct Answer
Model for quality Assurance
Select The Blank
Question
While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
True/False
Question
Continious improvement is improvement of inviromental system.
Correct Answer
True
Multiple Choice Single Answer
Question
The documents of external origin :Correct Answer
Should be controlled separately
TQM & HR
Multiple Choice Multiple Answer
Question
Employee should be involved in :Correct Answer
Decision making , Participation
Match The Following
Question
Correct Answer
Your Answer
The management
Establishment &
Enhancing customer satisfaction
representative is responsible
implementation
far
of QMS
The management review As & when required
As & when required
conducted
In ISO the focus on customer
Enhancing customer
Supplier satisfaction
satisfaction
Responsibility for quality Top management
Establishment & implementation
objective
of QMS
True/False
Question
Continual improvement which focusses on the improvement of of the
EMS, must be reviewed every monthefor any changed aspects and
impacts.
Correct Answer
False
Select The Blank
Question
The evaluation & selection of vendor ________.
Correct Answer
Must have procedure for selection
Multiple Choice Single Answer
Question
What is document control?
Correct Answer
Document Required by EMS to be controlled
Multiple Choice Multiple Answer
Question
What are critical HR issue ?
Correct Answer
Recruitment & Selection , Training & development , Appraisal
Multiple Choice Multiple Answer
Question
The management review to be conducted :Correct Answer
At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question
Zone in Tolerance means :Correct Answer
Gap between adequate service & desired service , Gap between min &
max expectation
Multiple Choice Single Answer
Question
ISO calls far :Correct Answer
Product approach
True/False
Question
In TQM "Total" means Total Organization.
Correct Answer
True
Select The Blank
Question
The TQM approach is based on employee's ________.
Correct Answer
Participation
TQM & HR
Multiple Choice Single Answer
Question
In quality Assurance primary concern is:Correct Answer
Co-ordination
Select The Blank
Question
Knowing capability of any process is required to ________.
Correct Answer
Predict the behavior of process
Multiple Choice Multiple Answer
Question
Competitive advantage will be achieved by :Correct Answer
Serving customer in excellent fashion , Get in pat from customer &
convert in service , Technological improvement
Multiple Choice Single Answer
Question
The need fore CMM is :Correct Answer
To ensure that the product is consistent
Multiple Choice Multiple Answer
Question
Multi- disciplinary approach means :Correct Answer
People from different discipline in organization , People from different
department having diff skill
Multiple Choice Multiple Answer
Question
The competence of the employee means :Correct Answer
Competence of personnel performing work affective quality , Evaluale
the effectiveness of action taken , Maintain appropriate Record
Multiple Choice Single Answer
Question
What is core value?
Correct Answer
Excellence
Multiple Choice Single Answer
Question
Calibration Activity in company is :Correct Answer
Appraisal cost
Select The Blank
Question
________organisations are not eligible for MBNQA.
Correct Answer
Software
Multiple Choice Multiple Answer
Question
The role of management is :Correct Answer
To provide Resources , To define EMS , To monitor the effectiveness of the
system
Multiple Choice Single Answer
Question
Process capability is :Correct Answer
Long term performance of process
Multiple Choice Multiple Answer
Question
While setting Goal ,following things to be consider.
Correct Answer
Marketability of product , Organization need
True/False
Question
Finance is pillar of TQM.
TQM & HR
Correct Answer
False
Multiple Choice Single Answer
Question
TQM approach is:Correct Answer
Centered on quality
Select The Blank
Question
________ provides the competitive advantage.
Correct Answer
Serving customer in excellent fashion
Select The Blank
Question
Arrow indicates ________.
Correct Answer
Direction of flow
True/False
Question
TQM & ISO both focuses on employee.
Correct Answer
False
Select The Blank
Question
The supplier must provided ________ information to management.
Correct Answer
Adequate
Multiple Choice Multiple Answer
Question
Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
Select The Blank
Question
While calculating CPK standard deviation is________.
Correct Answer
Estimated
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
Multiple Choice Single Answer
Question
In TQM "Total" refers to :Correct Answer
Total organisation
True/False
Question
CPK is 1' 33 means four sigma process.
Correct Answer
True
Select The Blank
Question
The base of Tqm is________
Correct Answer
Employee involvement
Multiple Choice Multiple Answer
Question
The benefits of Quality circle can be experienced by :Correct Answer
Employees , Organization
Select The Blank
TQM & HR
Question
Correct Answer
At predetermined interval
True/False
Question
The control of enviromental aspect Life side analysis.
Correct Answer
True
Multiple Choice Multiple Answer
Question
The inviromental policy must :Correct Answer
Be Relevant to the activity , Comply with legislation , Commits to
prevention of pollution
True/False
Question
Poor service is due to Poor people.
Correct Answer
False
True/False
Question
Enviromental impact is any change to the environment, whether adverse
or beneficial.
Correct Answer
True
Multiple Choice Single Answer
Question
Which is not pillar of TQM
Correct Answer
Finance
Multiple Choice Multiple Answer
Question
If some activity are outsourced :Correct Answer
Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Select The Blank
Question
The documents of external origin ________
Correct Answer
Should be controlled separately
Multiple Choice Single Answer
Question
The management review is carried :Correct Answer
To ensure effectiveness Of QMS
Multiple Choice Multiple Answer
Question
ISO - 14001 gives stress on :Correct Answer
Plan - Do -check -Act , Enviromental protection , Prevention rather than
detection
True/False
Question
Significant aspect means Perceived Risk.
Correct Answer
True
Select The Blank
Question
________ is a strategic effort, directed at attaining business objective,
through preventive action.
Correct Answer
Quality
True/False
Question
The process mapping means sequence & interaction of process.
TQM & HR
Correct Answer
True
Multiple Choice Single Answer
Question
Evolution of quality concept. Current era is
Correct Answer
Continual Improvement
Match The Following
Question
Correct Answer
Your Answer
Process is controlled
Process capability
CMM is
Capability maturity
Capability maturity
Performance is model
respectable
Correct Answer
Your Answer
Appraisal cost
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
TQM & HR
Correct Answer
Team work
Multiple Choice Single Answer
Question
Who is responsible for Deploying quality policy?
Correct Answer
Top management
Select The Blank
Question
The enviromental management system followed by organisation is
________.
Correct Answer
IS0-14001
Multiple Choice Single Answer
Question
ISO 9000 & TQM are :Correct Answer
Supportive to each other
True/False
Question
ISO calls for Product approach.
Correct Answer
False
Multiple Choice Multiple Answer
Question
Measuring instrument should be :Correct Answer
Calibrated , Adjested & Re-Adjested , Properly located
Select The Blank
Question
In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
True/False
Question
Cause & effect diagram shows relation between causes & its effect.
Correct Answer
True
Multiple Choice Multiple Answer
Question
The evaluation & selection of vendor :Correct Answer
Must have predetermined procedure , Must be assessed
True/False
Question
In TQM - M stands for Money.
Correct Answer
False
Multiple Choice Single Answer
Question
TQM is a:Correct Answer
Philosophy
Multiple Choice Multiple Answer
Question
Which are pillar of Tqm :Correct Answer
Morale , Delivery
Multiple Choice Single Answer
Question
The Enviromental policy contains :Correct Answer
Commitment to prevention of pollution
Multiple Choice Multiple Answer
TQM & HR
Question
Correct Answer
Customer satisfaction , People involvement
Multiple Choice Multiple Answer
Question
The Quality problems arises :Correct Answer
Due to management , Due to Employee
Select The Blank
Question
When the process is in mature stage, it means ________.
Correct Answer
Process is defined
Multiple Choice Single Answer
Question
The ISO is based on :Correct Answer
Plan - do - check- Act
Multiple Choice Multiple Answer
Question
In parato Analysis, we have to focus on problem which contribute :Correct Answer
80 % Of total problem , 80 % Of causes.
Select The Blank
Question
________ is the machine down time.
Correct Answer
Waste
Select The Blank
Question
When the process is ________ then it is under control.
Correct Answer
Within specification
Multiple Choice Single Answer
Question
The human Resource :Correct Answer
Must be competent
Select The Blank
Question
Payment Against warranty is________.
Correct Answer
External failure cost
Select The Blank
Question
The quality approach is ________
Correct Answer
Potential failure prevention
Select The Blank
Question
Reputation means________.
Correct Answer
Past performance
Select The Blank
Question
________ is responsible for quality objective.
Correct Answer
Top management
Multiple Choice Multiple Answer
Question
Type of waste are :-
TQM & HR
Correct Answer
Waiting time , Transport , Processing waste
Multiple Choice Single Answer
Question
Before Accepting the order :Correct Answer
It should be reviewed
Select The Blank
Question
________ brings cultural change.
Correct Answer
Small improvement
Select The Blank
Question
Model used in software industry to check the quality is called________
Correct Answer
Capability maturity model
True/False
Question
Enviroment indudes natural resources.
Correct Answer
True
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Select The Blank
Question
While calculating PPK standard deviation is________.
Correct Answer
Calculated
Multiple Choice Multiple Answer
Question
The company collect document to :Correct Answer
Demonstrate effectiveness of system , Requirement of QMS
Multiple Choice Single Answer
Question
Total points in MBNQA is :Correct Answer
1000
True/False
Question
TQM approach centered on quality.
Correct Answer
True
Match The Following
Question
Correct Answer
Your Answer
Quality is
As per manufacturer
Japan
TQM & HR
Question
TQM & HR
True/False
Question
Quality circle benefit to Employee.
Correct Answer
True
Multiple Choice Multiple Answer
Question
What are main business process objective
Correct Answer
Customer service , Profit & loss
Multiple Choice Single Answer
Question
ISO - 140001 is built upon which of the following?
Correct Answer
Plan - Do - check - Act
Multiple Choice Multiple Answer
Question
Cost of poor quality comprises :Correct Answer
Cost of internal failure , Cost of external failure
Multiple Choice Multiple Answer
Question
Validation of process is required to demonstrate :Correct Answer
Planned results , To verify result
Select The Blank
Question
Working together for excellence is ________.
Correct Answer
Team work
Multiple Choice Multiple Answer
Question
The benefite of ISO 14001 are applicable to :Correct Answer
The organisation which adopts it , Adjacent property owner & enviroment
Multiple Choice Multiple Answer
Question
Service Assurance is :Correct Answer
Confidence with customer , Customer have trust , Employee have
knowledge
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
True/False
Question
Bar chart shows how data is spread across the range.
Correct Answer
True
Multiple Choice Single Answer
Question
If TQM done properly :Correct Answer
It brings significant organisational changes
Multiple Choice Multiple Answer
Question
While recruiting person he should
Correct Answer
Competent to perform job , Trained to perform specified job
True/False
Question
Value is for which customer is paying.
TQM & HR
Correct Answer
True
Multiple Choice Multiple Answer
Question
Reliability of product means :Correct Answer
Consistency of performance , Performance over period
Select The Blank
Question
Quality means________.
Correct Answer
Fitness for use
TQM & HR
True/False
Question TQM focuses on customer by Delighting customer.
Correct Answer True
Select The Blank
Question TQM promotes________
Correct Answer Team work
True/False
Question TQM approach centered on quality.
Correct Answer True
Select The Blank
Question ISO - 9000- 1994 is ________
Correct Answer Model for quality Assurance
Multiple Choice Multiple Answer
Question Corrective action means :Correct Answer Action taken on detecting NC , Action taken on observed NC
True/False
Question In TQM, approach to employee is to involve people.
Correct Answer True
Multiple Choice Single Answer
Question By adopting TQM philosophy, it benefits to :Correct Answer Organisation & employee
Select The Blank
Question The quality approach is ________
Correct Answer Potential failure prevention
True/False
Question The role of management in QMS is to provide resources.
Correct Answer True
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
Select The Blank
Question The primary responsibility of human Resource is ________
Correct Answer To provide competent person
Multiple Choice Single Answer
Question The role of management in QMS is :Correct Answer To provide resources
Multiple Choice Single Answer
Question The Design & Development Review to be carried :Correct Answer To evaluate the ability of Design to meet Specification
Select The Blank
Question The evaluation & selection of vendor ________.
TQM & HR
Correct Answer Must have procedure for selection
Multiple Choice Single Answer
Question Process capability is :Correct Answer Long term performance of process
True/False
Question The soft side of TQM include Training on job
Correct Answer True
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer Frequency Distribution tool , Data analysis tool
Select The Blank
Question The Design & Development Review to be carried ________
Correct Answer To evaluate ability of product to meet requirements
Select The Blank
Question ________ is a strategic effort, directed at attaining business objective,
through preventive action.
Correct Answer Quality
Multiple Choice Single Answer
Question While setting Quality objective, What is to be consider :Correct Answer Customer need
Multiple Choice Multiple Answer
Question The competence of the employee means :Correct Answer Competence of personnel performing work affective quality ,
Evaluale the effectiveness of action taken , Maintain appropriate Record
Select The Blank
Question The base of Tqm is________
Correct Answer Employee involvement
True/False
Question Gap 5 is Gap between expectation & perceived service.
Correct Answer True
Match The Following
Question
Correct Answer
Process is managed level
Performance is model respectable
Critical process maturity concept include
Process capability
Managed level of process
Process is controlled
CMM is
Capability maturity
Multiple Choice Multiple Answer
Question While recruiting person he should
Correct Answer Competent to perform job , Trained to perform specified job
True/False
Question Process capability is only calculated when it qualify Bell shape curve.
Correct Answer True
True/False
Question The main business process objective is to serve the customer in excellent
manner.
TQM & HR
Correct Answer True
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
Multiple Choice Multiple Answer
Question When cpk is less than one, :Correct Answer Process is not capable , Process is volatile
Match The Following
Question
Correct Answer
Dimension
Physical facility
Service characteristic
Vary from time to time
Customer satisfaction survey
To assess customer satisfaction level
Poor service is due to
Inadequate resource
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Multiple Choice Single Answer
Question Service characteristic is :Correct Answer It is intangible
Multiple Choice Single Answer
Question In control chart, X bar means :Correct Answer Average of Reading
Multiple Choice Single Answer
Question The ISO is based on :Correct Answer Plan - do - check- Act
Multiple Choice Multiple Answer
Question CMM is nothing but :Correct Answer Use of process means , Capability maturity model
Multiple Choice Single Answer
Question Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer Total quality management
Select The Blank
Question TQM promotes________
Correct Answer Team work
Select The Blank
Question Documents in company are controlled by ________.
Correct Answer Management Representative
Multiple Choice Multiple Answer
Question In ISO the focus is on :Correct Answer Enhancing customer satisfaction , Delighting customer
True/False
Question ISO emphasis on Detection.
Correct Answer False
True/False
TQM & HR
Question The process mapping means sequence & interaction of process.
Correct Answer True
Multiple Choice Multiple Answer
Question Control chart is :Correct Answer Process monitoring tool , Process control tool
Multiple Choice Single Answer
Question In business, vision involve :Correct Answer Mission statement
Multiple Choice Single Answer
Question CMM is applicable to :Correct Answer Software industry
Multiple Choice Multiple Answer
Question What are main business process objective
Correct Answer Customer service , Profit & loss
Multiple Choice Single Answer
Question The documents of external origin :Correct Answer Should be controlled separately
Match The Following
Question Correct Answer Your Answer
ISO emphasis on
Prevention
ISO
International organization far standard
Lead assessor
Qualified personnel
ISO currently in use
ISO - 9000 -2000
Select The Blank
Question The objective of ISO-9000________
Correct Answer Customer satisfaction
Multiple Choice Multiple Answer
Question Common elements of winners are :Correct Answer Senior management was actively involved , Control of overall
process , Focus on customer
Multiple Choice Single Answer
Question Which is not part of cost of poor quality ?
Correct Answer Appraisal cost
Multiple Choice Multiple Answer
Question Tqm focus on :Correct Answer Employee , Customer
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question Evolution of quality concept. Current era is
Correct Answer Continual Improvement
Multiple Choice Single Answer
Question CMM assumes that :Correct Answer Problems are of managerial nature
TQM & HR
Select The Blank
Question Process Quality planning means ________.
Correct Answer Building quality into processes
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Select The Blank
Question Response is________.
Correct Answer Speed
Multiple Choice Single Answer
Question Strategic quality management means :Correct Answer Strategic Improvement
Select The Blank
Question Working together for excellence is ________.
Correct Answer Team work
Multiple Choice Single Answer
Question Who is responsible for quality objective?
Correct Answer Top management
Select The Blank
Question ________ is the machine down time.
Correct Answer Waste
True/False
Question By Applying basic principle, the process improvement will be in
organization's focuses on work process.
Correct Answer True
True/False
Question The performance process is repeatable level.
Correct Answer True
Multiple Choice Multiple Answer
Question Benefit of model based improvement are :Correct Answer Establish common language , Models are comprehensive
Select The Blank
Question The non conforming products are ________.
Correct Answer Identified & controlled
Select The Blank
Question Arrow indicates ________.
Correct Answer Direction of flow
Multiple Choice Single Answer
Question TQM & ISO both focuses on :Correct Answer Customer
Multiple Choice Multiple Answer
Question Continual improvement is in :Correct Answer Enviromental objective , Audit Result , Corrective action
TQM & HR
Multiple Choice Multiple Answer
Question Reliability of product means :Correct Answer Consistency of performance , Performance over period
Multiple Choice Single Answer
Question ISO - 9000- 1994 is :Correct Answer Model for quality Assurance
Multiple Choice Multiple Answer
Question Which of the following are depicted as the levels of the TQM?
Correct Answer Culture , Management style
True/False
Question Leadership from top should be totally honest & transparent in dealing .
Correct Answer True
True/False
Question Enviromental impact is any change to the environment, whether adverse
or beneficial.
Correct Answer True
True/False
Question ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer True
Match The Following
Question Correct Answer Your Answer
TQM promotes
Kaizen is
Small
Quality circle can solve problem related to
Quality circle benefit to
Employee participation
change
Continuous improvement
Employee
TQM & HR
Correct Answer True
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer Frequency Distribution tool , Data analysis tool
Multiple Choice Multiple Answer
Question The benefite of ISO 14001 are applicable to :Correct Answer The organisation which adopts it , Adjacent property owner &
enviroment
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer External failure cost
Select The Blank
Question The evaluation & selection of vendor ________.
Correct Answer Must have procedure for selection
Multiple Choice Multiple Answer
Question In parato Analysis, we have to focus on problem which contribute :Correct Answer 80 % Of total problem , 80 % Of causes.
Multiple Choice Multiple Answer
Question Cost of poor quality comprises :Correct Answer Cost of internal failure , Cost of external failure
Multiple Choice Multiple Answer
Question While setting Goal ,following things to be consider.
Correct Answer Marketability of product , Organization need
Multiple Choice Single Answer
Question Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer Total quality management
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Multiple Choice Multiple Answer
Question Following are the phases of intervention:Correct Answer Formulation stage , Maintenance stage , Implementation stage
Multiple Choice Single Answer
Question The documents of external origin :Correct Answer Should be controlled separately
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer Qualified personnel , Leading team of auditor
Select The Blank
Question While calculating CPK standard deviation is________.
Correct Answer Estimated
Select The Blank
Question TQM promotes________
Correct Answer Team work
TQM & HR
True/False
Question Value is for which customer is paying.
Correct Answer True
Select The Blank
Question While setting Quality objective, ________ to be considered.
Correct Answer Customer need
True/False
Question CPK is 1' 33 means four sigma process.
Correct Answer True
Multiple Choice Single Answer
Question By adopting TQM philosophy, it benefits to :Correct Answer Organisation & employee
Multiple Choice Single Answer
Question The process mapping means :Correct Answer The sequence of operation & interaction of process
True/False
Question Recruitment & Selection are critical HR issue.
Correct Answer True
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer Training & development
Multiple Choice Multiple Answer
Question Internal audits to be conducted to check the :Correct Answer Conformance to ISO - 14001 , Conformance of system for
effectiveness , Stuatutory Requirement
Multiple Choice Single Answer
Question Mission conveys the massage about what & who is :Correct Answer Company
Select The Blank
Question Quality means________.
Correct Answer Fitness for use
Select The Blank
Question ________ is important in providing some underpinning of the sense of
shared responsibility.
Correct Answer Single status
Select The Blank
Question The planning & implementing Enviromental policy is responsibility
of________
Correct Answer Management representative.
Select The Blank
Question While calculating PPK standard deviation is________.
Correct Answer Calculated
Select The Blank
Question Arrow indicates ________.
TQM & HR
Correct Answer Direction of flow
True/False
Question Leadership from top should be totally honest & transparent in dealing .
Correct Answer True
True/False
Question Lead assessor is Qualified personnel.
Correct Answer True
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
True/False
Question ISO is Quality management system.
Correct Answer True
True/False
Question Quality is fitness for Purpose
Correct Answer True
True/False
Question By Applying basic principle, the process improvement will be in
organization's focuses on work process.
Correct Answer True
Multiple Choice Single Answer
Question TQM culture is :Correct Answer Continuous improvement
Multiple Choice Single Answer
Question Dr. Deming worked in which country ?
Correct Answer Japan
Multiple Choice Single Answer
Question Analysis is :Correct Answer Process monitoring tool
True/False
Question Enviroment indudes natural resources.
Correct Answer True
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer Gap between expectation & perceived service
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question The role of management is :Correct Answer To provide Resources , To define EMS , To monitor the effectiveness
of the system
TQM & HR
Multiple Choice Single Answer
Question The operational control in EMS is :Correct Answer The process of controlling environment
Select The Blank
Question Planning of internal hazardous material & its disposal________.
Correct Answer Contains Planing aspect
Multiple Choice Multiple Answer
Question The company collect document to :Correct Answer Demonstrate effectiveness of system , Requirement of QMS
Select The Blank
Question Payment Against warranty is________.
Correct Answer External failure cost
Select The Blank
Question Model used in software industry to check the quality is called________
Correct Answer Capability maturity model
True/False
Question Bar chart shows how data is spread across the range.
Correct Answer True
Multiple Choice Single Answer
Question Dr. Deming's contribution is in the field of :Correct Answer Quality
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
True/False
Question The European award uses the criteria of efficiency & effectiveness.
Correct Answer True
Multiple Choice Single Answer
Question CMM is applicable to :Correct Answer Software industry
Multiple Choice Multiple Answer
Question The competence of the employee means :Correct Answer Competence of personnel performing work affective quality ,
Evaluale the effectiveness of action taken , Maintain appropriate Record
Multiple Choice Single Answer
Question Process capability is :Correct Answer Long term performance of process
Select The Blank
Question Any process is to be ________.
Correct Answer Controllable
Select The Blank
Question The quality approach is ________
Correct Answer Potential failure prevention
TQM & HR
Multiple Choice Single Answer
Question All employee in organization must :Correct Answer Understand & recognize commitment
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Select The Blank
Question The enviromental management system followed by organisation is
________.
Correct Answer IS0-14001
Select The Blank
Question In ISO the focus on customer is ________
Correct Answer In Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question Process evaluation is to identify :Correct Answer Potential failure prevention , Correctness of product
True/False
Question Each Environmental objective must be traceable back to the
Environmental Policy statement.
Correct Answer True
Match The Following
Question
Correct Answer
Circle symbol
Binging or end of operation
Pareto analysis is Data analysis told
X bar means
Average of reading
LCT means
Lower control limit
Multiple Choice Single Answer
Question In ISO the focus is on :Correct Answer Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question Leadership style from top to bottom is :Correct Answer Totally honest & transparent , Providing consistent vision / direction
True/False
Question Continious improvement is improvement of inviromental system.
Correct Answer True
Select The Blank
Question Knowing capability of any process is required to ________.
Correct Answer Predict the behavior of process
Select The Blank
Question ________ is responsible for quality objective.
Correct Answer Top management
Multiple Choice Single Answer
Question The management review is carried :Correct Answer To ensure effectiveness Of QMS
True/False
TQM & HR
Question ISO calls for Product approach.
Correct Answer False
Select The Blank
Question The base of TQM is________
Correct Answer Employee involvement
Multiple Choice Multiple Answer
Question The benefits of Quality circle can be experienced by :Correct Answer Employees , Organization
Multiple Choice Multiple Answer
Question How TQM helps in reducing cost?
Correct Answer By reducing external failure cost , By reducing internal failure
Multiple Choice Multiple Answer
Question Which of the following are depicted as the levels of the TQM?
Correct Answer Management style , Culture
Multiple Choice Single Answer
Question Which type of organization is not eligible for MBNQA?
Correct Answer Manufacturing
True/False
Question ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer True
True/False
Question Prevention of pollution is prevention of cause of pollution.
Correct Answer True
Multiple Choice Single Answer
Question CPK indicate :Correct Answer Process capability of two side process with centre
Multiple Choice Single Answer
Question The need for TQM is due to :Correct Answer Cut throat competition
True/False
Question In TQM - M stands for Money.
Correct Answer False
True/False
Question Cause & effect diagram shows relation between causes & its effect.
Correct Answer True
Multiple Choice Multiple Answer
Question Common features of CMM is how to produce software product which are :Correct Answer Consistence , Repeatable , Predictable
Multiple Choice Multiple Answer
Question Factor in GAP 1 is :Correct Answer In sufficient market research , Luck of interaction between
management & customer , Luck of communication
Select The Blank
Question ________ is one of the major business processes.
TQM & HR
Correct Answer Customer servive & supply chain
Multiple Choice Multiple Answer
Question The records shall be maintained to provide :Correct Answer Evidence of conformity to requirement , Demonstrate effectiveness
of system
Multiple Choice Single Answer
Question ISO 9000 & TQM are :Correct Answer Supportive to each other
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question In quality Assurance primary concern is:Correct Answer Co-ordination
Multiple Choice Multiple Answer
Question Failure Mode & Effect analysis is used as :Correct Answer Prevention tool , Analysis tool
Select The Blank
Question Response is________.
Correct Answer Speed
Multiple Choice Single Answer
Question Creativity means :Correct Answer Unlimited thinking
1.
Explain the various levels of SEI-CMM in detail.
Continuous process improvement is based on many small, evolutionary steps rather
than revolutionary innovations. The staged structure of the CMM is based on principles
of product quality espoused by Walter Shewart, W. Edwards Deming, Joseph Juran, and
Philip Crosby. The CMM provides a framework for organizing these evolutionary steps
into five maturity levels that lay successive foundations for continuous process
improvement. These five maturity levels define an ordinal scale for measuring the
maturity of an organization's software process and for evaluating its software process
capability. The levels also help an organization prioritize its improvement efforts.
A maturity level is a well-defined evolutionary plateau toward achieving a mature
software process. Each maturity level comprises a set of process goals that, when
satisfied, stabilize an important component of the software process. Achieving each
level of the maturity framework establishes a different component in the software
process, resulting in an increase in the process capability of the organization.
Five Maturity Levels
TQM & HR
Optimizing
(5)
Managed
(4)
Defined
(3)
Repeatable
(2)
Initial
(1)
Organizing the CMM into the five levels shown in Fig. prioritizes improvement actions
for increasing software process maturity. The labeled arrows in Fig. indicate the type of
process capability being institutionalized by the organization at each step of the
maturity framework.
Level 1: Initial
This process is characterized as ad hoc, and occasionally even chaotic. Few processes
are defined, and success depends on the individuals efforts and heroics.
Understanding the initial maturity level
Performance driven by the competence and heroics of the people doing the work.
Consistency and compliance to standards driven by management priorities
usually schedule is top priority
High quality and exceptional performance possible so long as the best people can
be hired.
Unpredictability- For good or ill- Characterizes the initial level organisation.
Level 2: Repeatable
Basic project management processes are established to track cost, schedule and
functionality. The necessary process discipline is in place to repeat earlier successes
on projects with similar applications. The KPAs that are adhered to at this level are:
Requirement management (RM) Plan, manage, analyze requirements
Software project planning (PP) Project and increment planning
SW project tracking, oversight (PT) Track production versus plans, targets
SW subcontract management (SM) Select, manage qualified contractors
SW quality assurance (QA) Product verification, certification
SW configuration management (CM) Engineering change
Understanding the repeatable maturity level:
Management must Walk the talk to initiate an improvement effort.
Only with management discipline will good software engineering practices be
retained in the crunch.
Management processes establish role models for process improvement.
TQM & HR
Management And process Discipline empowers the engineering processes and
the technical staff.
Key process area
Practiced
Documented
Enforced
Trained
Measured
Able to improve.
Level 3: Defined
Management and engineering activities are documented, standardized and integrated
into a family of standard software process for the organization. Projects use a tailored
version of the organizations standard software process for developing and
maintaining software. The additional KPAs that are in compliance at this level over
Level 2 are:
Peer reviews
Inter group coordination.
Software product engineering.
Integrated software management.
Training program.
Organisation process definition
Organisation process focus
TQM & HR
A well defined process can be characterised by:
Readiness criteria
Inputs
Verification mechanisms
Outputs
Complexion criteria
Level 4: Managed
Detailed measures of the software process and product quality are collected. Software
processes and products are quantitatively understood and controlled. The KPAs
addressed at this level additionally are:
Level 5: Optimizing
Continuous process improvement is facilitated by quantitative feedback from the
process and from piloting innovative ideas and technologies. The KPAs adhered to at
this level are:
Defect prevention (DP) Identify, track sources of defects
Technology change management (TM) Identify beneficial new technologies
Process change management (PC) Continually improving performance
Understanding the Optimizing maturity level
TQM & HR
Control chart with common cause
Word of mouth
communications
Personal needs
Past Experience
TQM & HR
Expected service
Perceived Service
Customer
Expectations
Management perception of
customer expectation
Gap 1 may stem from any combination of the following factors:
Key factors:
Insufficient market research
Inadequate use of market research
Lack of interaction between management and customers
Insufficient communication between contact employee and managers
Too many layers between contact personnel and top management.
Gap2: Between management perception of customer expectation and service
quality specification
Gap 2 arises when there is a discrepancy between what managers perceive that
customers expect and the actual standards that they (the managers) set for service
delivery. This gap may occur when management is aware of customers expectations
but may not be willing or able to put systems in place that meet or exceed those
expectations. For example, putting systems in place may require changes in
fundamental organizational work processes, acquiring expensive new technology, or
refocusing organizational attitudes to understand service from the customers point of
view.
Management perception of
customer expectation
TQM & HR
Service Quality
Specifications
Key factors:
Service Delivery
Service quality
Specification
Gap 4: Between service delivery and external communication to customer
Your advertisements brag about your organizations exceptional service, and raise
your customers expectations. But are you able to deliver on the promise? Customers
perceive that organizations are delivering low-quality service when a gap appears
between promised levels of service and the service that is actually delivered. This gap
is created when advertising, personal selling or public relations over-promise or
misrepresent service levels. This gap can also occur when companies do not inform
their customers of special behind-the scenes efforts that are designed to serve to
improve service levels, but are not visible to customers. Making customers aware of
these standards or efforts can heighten their service perceptions. If either or both of
the following indicators are present, Gap 4 probably exists. Inadequate horizontal
TQM & HR
communication within and across departments (operations, marketing, and human
resources) and branches can be responsible for Gap 4. This problem can be alleviated
when customer-contact staff have input in the planning and execution of advertising,
and/or are made aware of external communications aimed at customers before it hits
the streets. Also, when customer service and sales functions are separate and
distinct, the sales force must communicate with customer-contact staff to discuss the
level of service that can be promised to customers.
Another major cause of Gap 4 is a propensity to over promise in external
communications. As a result, the companys promises do not accurately reflect what
customers receive in the service encounter. Commonly, a higher degree of
discrepancy occurs when there is increasing pressure inside the company to generate
new business or when competing organizations over promise to gain new customers.
Key factors:
Inadequate communication between sales people and operations.
Inadequate communication between advertising and operations
Differences in policies and procedures across departments
Puffery in advertising.
Puffery in personal selling.
Service Quality Model:
Word of mouth
Personal Needs
Past Experience
Expected service
Customer
Gap 5
Perceived Service
Service Delivery
Gap 1
Gap
4
Gap
3
External
Communication to
customer
Gap
2
Management perception
of customer
Expectations
TQM & HR
Responsiveness - the willingness to help customers and provide prompt service.
Empathy - the degree to which customers are treated as individuals.
Assurance - the ability to inspire trust and confidence.
Tangibles - physical elements of the service such as facilities and equipment.
Dimension
Refers to
Specific criteria that
customers use
RELIABILITY
Your ability to perform the
Timeliness
Delivering on promisespromised service dependably Consistency/Regularity
and accurately
Accuracy
ASSURANCE
Inspiring trust and
confidence
TQM & HR
4.2.3 Control of documents
4.2.4 Control of records
5. Management responsibilities
5.1 Management commitment
5.2 Customer focus
5.3 Quality policy
5.4 Planning (title only)
5.4.1 Quality objectives
5.4.2 Quality management system planning
5.5 Responsibility, authority and communication
5.5.1 Responsibility and authority
5.5.2 Management representative
5.5.3 Internal communication
5.6 Management review
5.6.1 General
5.6.2 Review input
5.6.3 Review output
6. Resource management
6.1 Provision of resources
6.2 Human resources
6.2.1 General
6.2.2 Competence, awareness and training
6.3 Infrastructure
6.4 Work environment
7. Product realizations
7.1 Planning of product realization
7.2 Customer-related processes
7.2.1 Determination of requirements related to the product
7.2.2 Review of requirements related to the product
7.2.3 Customer communication
7.3 Design and development
7.3.1 Design and development planning
7.3.2 Design and development inputs
7.3.3 Design and development outputs
7.3.4 Design and development review
7.3.5 Design and development verification
7.3.6 Design and development validation
7.3.7 Control of design and development changes
7.4 Purchasing
7.4.1 Purchasing process
7.4.2 Purchasing information
7.4.3 Verification of purchased product
7.5 Production and service provision
7.5.1 Control of production and service provision
7.5.2 Validation of processes for production and service provision
7.5.3 Identification and traceability
7.5.4 Customer property
7.5.5 Preservation of product
7.6 Control of monitoring and measuring devices
8. Measurement, analysis and improvement
8.1 General
8.2 Monitoring and measurement
8.2.1 Customer satisfaction
8.2.2 Internal audit
8.2.3 Monitoring and measurement of processes
8.2.4 Monitoring and measurement of product
TQM & HR
8.3
8.4
8.5
Product Realisation:
Clause 7.1 Planning of Realisation processes
Product realisation is that sequence of processes and sub-processes required
achieving the product, and the clause specifies the requirements to be met to achieve
this.
Clause 7.2 Customer-related processes
This is divided into 3 sub-clauses:
7.2.1 Determination of requirements related to the product
7.2.2 Review of requirements related to the product
7.2.3 Customer communication
This sub-clause is essentially a new requirement, the organisation being required to
implement effective liaison with customers, with the aim of meeting customer
requirements.
Clause 7.3 Design and/or development
This is divided into 7 sub-clauses:
7.3.1 Design and development planning
7.3.2 Design and development inputs
7.3.3 Design and development outputs
7.3.4 Design and development review
7.3.5 Design and development verification
7.3.6 Design and development validation
7.3.7 Control of design and development changes
Clause 7.4 Purchasing
This is divided into 3 sub-clauses:
7.4.1 Purchasing process
7.4.2 Purchasing information
7.4.3 Verification of purchased product
Clause 7.5 Production and service operations
This is divided into 4 sub-clauses:
7.5.1 Control of production and services
7.5.2 Validation of process for production and service provision
7.5.3 Identification and traceability
7.5.4 Customer property
7.5.5 Preservation of product
Clause 7.6 Control of monitoring and measuring devices
New requirements for software developed for tests have been added:
Software used for monitoring and measuring of specified requirements
shall be validated prior to use.
Clause
7
7.1
7.2
Control
Meaning
Product
Realisation
Planning of Determine the quality objectives and requirements for your
Product
products,
Realization Ensure that you adequately plan all of the processes and subprocesses needed to provide your products/services,
Plan the required inspection/testing activities,
Identify what records must be kept, to prove that the product has
been properly produced
Customer Related
Process
TQM & HR
7.2.1
7.2.2
7.3
7.3.1
7.3.2
7.3.3
7.3.4
7.3.5
7.3.6
7.3.7
7.4
7.4.1
Determination You
of must find out what your Customer requires from you, with
Requirementsregard to the actual product or service that you supply and also any
Related to theobligations that arise from it (such as legal requirements, warranties,
Product and support, etc)
Review of You must ensure that customer requirements are defined. If they are
Requirementsnot defined in writing, you must identify how you confirm what it is
Related to thethat you thought the Customer wanted. You must ensure you have
Product the resources to supply what has been ordered before you accept
the order.
You must define how changes in requirements are recorded how the
information is circulated around the relevant sections of your
organisation.
Design and You must plan and control all aspects of your design/development
Developmentwork.
Planning You must ensure that you identify the various design / development
processes and the related review stages. Also identify all relevant
responsibilities
Inputs
you must identify what the design inputs are (i.e. what information
do you need in order to design or develop your product or service?)
Your inputs should include any relevant functional requirements,
standards, legal requirements (e.g. mandatory safety requirements,
packaging
disposal/recycling
requirements,
CE
marking
requirements, etc). Where it is relevant, you should
Output
You must specify the design outputs (e.g. plans, drawings,
schematics, etc) in such a way that they can be checked to ensure
that they meet the design requirements. They must be suitable for
use by the organisation that receives them. For example, your
manufacturing department may require a Bill Of Materials, a "gold"
sample, and a full set of engineering drawings, etc. Your design
plans should state what is required, after you have discussed and
agreed this with the recipient (whether an external Customer or an
internal department).
Review
You must review the progress of the design activities at appropriate
stages. These can include theoretical calculation checks, Beta
testing, etc. You must identify and record any problems and propose
follow-up actions. Your plans should identify what these stages are
and when they occur. You must keep records of these reviews.
Verification You must verify your designs to ensure that the design meets the
design input requirements. Your plans should state how and when
you plan to do this.
Validation You must ensure that the product or service works correctly in
practice. In some cases, validation may include reviews of Customer
feedback after release of the product. This may lead to subsequent
design changes, or changes in future products. Your plans should
state how you plan to do this.
Changes You must ensure that any changes are reviewed and recorded. You
must consider the effect that the changes may have on any sections
of the design work already completed or under way.
Purchasing
Purchasing Documented procedures must be established and maintained in the
process company in order to ensure that purchased product or service
conforms to specified requirement. The type and extent of control
applied to the supplier and the purchased product will be dependant
upon the effect of the purchased product on subsequent product
realisation or the final product.
Evaluation and selection of vendors/suppliers.
This must include procedures for evaluating, selecting, and deleting
vendors/suppliers based on their ability to meet the requirement and
TQM & HR
7.4.2
7.4.3
7.5
7.5.1
7.5.2
7.5.3
for defining the type and degree of control exercised over them.
Purchasing Purchase orders (or letters of contract, etc) must clearly state what
information it is that you want (clever stuff, huh?). These must be reviewed for
adequacy before they are sent to the Vendor
Verification ofThis section is concerned with how you verify that the Vendor has
purchased product
supplied the correct items to you (in the 1994 version of the
standard, this was usually conducted at "Receiving Inspection", or
sometimes after the item was installed in another assembly ("Inprocess Inspection").
The second part of this section of the standard is relevant when you
intend to inspect checks at your Vendor's premises before the goods
are released (whether to you or directly to your Customer). In this
case, you must specify when they will be checked ("within 10 days
of notification by the Vendor", "following installation of sub-assembly
31", etc) and how they will be released ("not to be released until in
receipt of our written release instruction", etc). This must be
specified in the purchasing documents (this can be included on the
purchase order that you send to the Vendor, or included in a "Terms
& Conditions" document or "Contract of Supply", etc).
Production and
.
service provision
Control of This section is concerned with the process of producing your goods
production and
or services. You should consider how you control these processes,
service provision
including:
Information which specifies the characteristics of the product (so
that inspections and functional tests can be properly conducted)
Provision of work instructions (or SOPs, Method Statements, etc).
This can be by written instructions, drawings, photographs,
samples, etc.
Provision of suitable equipment and appropriate maintenance of
the equipment
Availability and use of suitable monitoring and measuring devices
Provision of procedures for release, delivery and (if applicable)
post-delivery activities (e.g. installation, commissioning, servicing,
etc)
Validation ofThis section is concerned with processes which produce items that
process of cannot be tested directly (e.g. specialist welding operations, where
production and
the only method is to ensure that properly trained and qualified
service provision
welders use highly-specified materials and equipment. The resulting
welds cannot be internally inspected, so all of the correct conditions
must be ensured). Other methods (e.g. for testing of crimped
electrical connectors) might include destructive testing of first and
last-off items or a sample destructive testing, etc.
In this case, you must define how you:
TQM & HR
7.5.4
7.5.5
7.6
on the wall with a picture of the items. Metal rods can have colored
paint put the end. However, if the differences are immediately
obvious, there may be no need to label goods. Do not overdo it!
Similarly, in some industries it may be necessary to be able to trace
exactly which materials from which supplier were used in which
goods. This may also extend to knowing which operators were
involved. The aerospace industry is a good example of this sort of
level of traceability.
In the software industry, configuration management fulfils this
requirement.
Customer property
If you receive goods from your Customer which you then build into
the items that you supply back to the Customer, then this clause of
the standard applies to you. Also, if your activities involve items
belonging to the Customer (e.g. if you service household electronic
items, etc), you must take care of them, etc.
In that case, you must record the goods upon receipt, and check that
they are suitable for use. If any problems are discovered, or it is
damaged or lost whilst under your control, you must report this back
to the Customer.
Customer data can be included under this heading (e.g. you provide
an analytical service and you analyse the data, or you are an
architect and you receive plans, property deeds, etc from the
Customer. Also, if you receive confidential information from your
Customer, etc).
Preservation of
You must have procedures in place which ensure that all materials,
product subassemblies and finished goods, etc are stored and handled so as
to prevent them from damage or deterioration.
However, this is not just limited to your stores or warehouse. It
includes all areas where materials are handled, processed or moved.
(The clause might have been more illuminating if had been entitled
"Materials Handling"!)
Also included in this section are the steps that you take to ensure
that goods are not damaged following your final inspection. If it is
your responsibility to deliver goods to your Client (that is, they do
not arrange for the collection of the goods), then you must also
choose you method of carriage appropriately. (If you use a
carrier/courier, then they should be included in your supplier
selection methods.
Control and You must identify what measurements need to be made, and what
monitoring ofequipment must be used. Where measuring equipment is used to
devices inspect or set up the goods that you manufacture, you must ensure
that they are accurate enough for the purpose. You should have then
regularly checked (calibrated). You must be able to prove that the
equipment is calibrated, so keep records of it!
If you find that the equipment is faulty, you must consider the effect
of that fault on the measurements taken using the equipment since
the last time you knew it was OK. This may mean that you have to
recall goods (e.g. if a braking system on a motor vehicle could have
been adversely affected), or it may mean that no action is required
(e.g. if the inaccuracy is not enough to cause any adverse
consequences). Either way, you must formally consider the matter
and record the consideration and the decision.
TQM & HR
Core values: Generally following core values are considered as important by most
organisations.
Excellence: We will be best especially in satisfying all our customers needs and we
will empower our employees to continuously improve the process that serve them
Innovation and Creativity: We are unconventional and unlimited in our thinking. We
apply creative mans to issues in order to discover possibilities for new solutions.
We are prepared with the entrepreneurial spirit to take calculated risks and do
things differently if it helps us to meet the needs of our customers.
Integrity: We are true to our word. All our actions are consistent with our word and
we are always honest about our capabilities and intensions. We are reliable
trustworthy and operate with integrity. We communicate openly, honestly and with
responsibility. We respect each other and speak openly and honestly without fear of
reprisal and regardless of our position. We listen carefully to what others have to
say.
Team work: We recognize that only by working in teams we will produce excellent
results. Taking full advantage of the unique contribution can ensure success
through teamwork
Leadership:
Uncompromising about their value systems.
Care deeply about people
Demand that each person be innovative contributor.
Tough on values, tender in support of the people
Speak constantly of vision.
Obsessive attention to detail.
Leadership is a key element in successful implementation of large scale change:
The leader shows the need and sets the vision, defining the basic purpose, goals, and
parameters or requirements of TQM. The leader needs to take a long term perspective,
and must be able to motivate others to stick with the process during early stages
when resistance and obstacles may seem insurmountable. The preferred leadership
style would be a participative one, so that staff may be involved in the design of the
specific system elements. This may seem in contradiction to the earlier stated
preference for an "intervention" approach as opposed to traditional participative
decision making. In the former, the leader is, in fact directive regarding the big picture
and overall goals, i.e., establishing PDM. Once that strategic direction has been
determined, a participative style may be used on implementation details. Prior to this
decision, of course, the manger should study TQM, talk to others who have used it,
and perhaps attend a preliminary training session. This is important in order for the
manager to accurately assess the fit between TQM and her/his style. This will be
necessary in establishing an organizational culture which is compatible with TQM,
nurturing and reinforcing continuous quality improvement.
In designing a comprehensive change process, the leader must acknowledge the
existing organizational culture (norms and values, managers' leadership philosophies
and styles at all levels) to ensure a good fit. TQM also needs to be congruent with or
aligned with other organizational processes, including reward systems, financial &
information systems, and training systems.
Implementing TQM essentially involves organizational transformation: beginning to
operate in new ways, developing a new culture. This also includes redesigning other
systems, as has been described above. Such change, while difficult, is possible in the
public sector, in spite of Swiss's (1992) reservations (Packard and Reid, 1990).
TQM & HR
Business Strategy:
It refers to the managerial game plan for single business. Business strategy concerns
the actions and the approaches crafted by management to produce successful
performance in one specific line of business. Business strategy is powerful if it
produces sizable and sustainable competitive advantage. It is weak if it results in
competitive disadvantage. Functional strategy concerns the game plan for running a
major functional activity or process within business. Effective strategy making begins
with a vision of where the organisational needs to head.
Business Vision:
Business vision involves coming up with mission statement that defines what business
the company is presently in and conveys the essence of Who we are?, What we do?,
and where we are now?
We shall be recognised as the best by every single customer as being the best in
sustained total customer satisfaction, in pursuit of our business.
Business Objective:
Customer satisfaction : To exceed customers satisfaction, to delight our
customers.
Employee Satisfaction : To Enhance motivation and personal growth of all
employees
Market Share
: To beat competition and increase the market share.
Profit and Return on assets : To increase profits and provide shareholders with a
satisfactory
return on their investments
TQM:
TQM is a philosophy of managing a set of business practices that emphasizes
continuous improvement in all phases of operations, 100 percent accuracy in
performing activities, involvement and empowerment of employees at all levels, team
based work design, benchmarking and fully satisfying customer expectations. Quality
improvement processes have now become a globally pervasive part of the fabric of
implementing strategies keyed to defect free manufacture, superior product quality,
superior customer service and total customer satisfaction. TQM entails creating a total
quality culture bent on continuously improving the performance of every task and
value chain activity.
Aligning business processes with business objectives
In any TQM philosophy aligning business processes to fulfill business objectives is the
major exercise. Functions/Activities are performed to achieve business objectives.
Departmental objectives are derived from business objectives. Activities are
performed in the department to achieve departmental objectives. For each activity
there is immediate internal or external customer and supplier.
It is necessary for every process owner to think about My Customer and What I
provide to them and about My Suppliers and What they provide to me. It is
necessary to identify major business processes in the organisation and measurement
of process performance. Following are some commonly identified as major business
processes in the industry:
TQM & HR
New product
Interviewing end users and understanding their needs
New product planning
New product design and manufacturing
New product marketing plans
Sales marketing
Market research
Stimulation of end users interest
Excellent marketing execution with our customers
Developing customer partnerships
Acquiring new customers
People
Hiring, appraising, training and development
Communicating
Reward and recognition
Developing organisation to meet customers needs
Conclusion
TQM plays a vital role in successfully implementing business strategy. When TQM is
not a part of a wider effort to improve strategy execution and business performance
they deteriorate into strategy-blind efforts to manage better.
6. What are the various building blocks of TQM?
The building blocks of TQM: processes, people, management systems and
performance
Measurement:
Everything we do is a Process, which is the transformation of a set of inputs, which can
include action, methods and operations, into the desired outputs, which satisfy the
customers needs and expectations. In each area or function within an organisation
there will be many processes taking place, and each can be analysed by an
examination of the inputs and outputs to determine the action necessary to improve
quality. In every organisation there are some very large processes, which are groups of
smaller processes, called key or core business processes. These must be carried out
well if an organisation is to achieve its mission and objectives. The section on
Processes discusses processes and how to improve them, and Implementation covers
how to prioritise and select the right process for improvement.
Total Quality Management:
Total:
Encompasses
all
functions,
all
activities,
all
employees,
all
subcontractors/Vendors/ Suppliers, complete all the time.
Quality: Measure of customer satisfaction and delight with the product and service.
Management: Leadership, Organisational structure, Working systems, Procedures
and Processes to make it happen and people.
Building Blocks of TQM:
Continuous
Improvement
Learning
Strategic
Innovation Quality Planning
People
TQM & HR
Continuous Improvement
How to review the process and results of annual plans and how to act
upon the knowledge gained
People:
People are a fundamental building block of any TQM organisation. The only point at
which true responsibility for quality can lie is with the people actually doing the job or
carrying out the process. The complexity of most processes in an organisation places
them beyond the control of any one individual, so the only efficient way to tackle
process improvement or re-design is through teamwork.
When properly managed and developed, teamwork improves processes and produces
results quickly and economically through the free exchange of ideas, information,
knowledge and data. It is an essential component of a total quality organisation,
building trust, improving communication and developing a culture of interdependence,
rather than one of independence.
The only point at which true responsibility for performance and quality can lie is with
the People who actually do the job or carry out the process, each of which has one or
several suppliers and customers. An efficient and effective way to tackle process or
quality improvement is through teamwork. However, people will not engage in
improvement activities without commitment and recognition from the organisations
leaders, a climate for improvement and a strategy that is implemented thoughtfully
and effectively. The section on People expands on these issues, covering roles within
teams, team selection and development and models for successful teamwork.
Quality in Daily work:
Because of the time we have invested in awareness and skill training, many of the
quality tools and concepts have become integrated into the way we do business,
either transforming or reinforcing staff behaviors and attitudes.
Below are a few examples of quality tools and principles that we now see incorporated
into daily activities: Self-Directed Work Teams: The development of Self-Directed Work Teams is
growing expression of teamwork, flattening the organization, and empowerment
principles. Team members will tell us that is a lot of work, but that the end result
produces efficiency and better service for the customer.
Customers as Partners: In a quality environment you begin to see your
customers as partners. We have instituted several formal partnership programs
with Schools and Colleges to plan for the effective use of information technology
resources and deliver those services. As well, we strive for a sense of partnering
with customers in developing and delivering our products and services.
TQM & HR
General Meeting Effectiveness: One of the most significant changes we have
noticed from the application of quality principles and tools is in the increased
effectiveness of our meetings.
Continuous Improvement:
The Continuous Improvement component allows organizations to examine their
current business environment relative to their diversity strategy and make changes
based on current challenges in their workforce, workplace and marketplace. It extends
current diversity learning through continued reinforcement.
Complacency is to be avoided, as it is a major hurdle in improvements. Widely
supported incremental improvement programs in every area of the organisation are a
sure way of achieving this objective. It is believed that that getting 1% improvement in
all areas is better for the organisation than 100% improvement in one area. Therefore
small projects initiated by the employees themselves taken up in all areas give a
boost and strength to this movement and also help in developing potential of the
people.
Continuous Improvement Objectives:
Identify New Challenges/Opportunities
Review Strategic Plan
Follow-up Assessment
TQM & HR
Quality
Planning
Quality
Improvement
Prove that the process can produce the product under operating
Quality Control conditions with minimal inspection.
Transfer the process to Operations.
TQM & HR
8. Drive out fear, so everyone may work effectively for the company,
9. Break down barriers between departments. People in research, design, sales, and
production must work as a team, to foresee problems of production and in use that
may be encountered.
10. Eliminate slogans, exhortations, and targets of the work force asking for zero
defects and new levels of productivity. Such exhortations only create adversarial
relationships, as the bulk of the causes of low quality and low productivity belong
to the system and thus fie beyond the power of the workforce.
11. a. Eliminate work standards (quotas) on the factory floor. Substitute leadership.
b. Eliminate management by objective. Eliminate management by numbers,
numerical goals. Substitute leadership.
12. a. Remove barriers that rob the hourly worker of his right to pride of workmanship.
The responsibility of supervisors must change from numbers to quality.
b. Remove barriers that rob people in management and in engineering of their right
to pride of workmanship. This means abolishment of the annual or merit rating and
of management by objective.
13. Institute a vigorous program of education and self-improvement.
14. Put everybody in the company to work to accomplish the transformation.
According to Demings Theory, A production system in composed of many interacting
sub systems. Managements job is to set the purpose for the system and to optimize
the system. Variation is an inherent part of any system. Common causes of variation
account for 80-90% of the total variation; assignable causes account for the rest. Only
management can address common causes of variation. Knowledge is not possible
without theory. Experience alone does not establish a theory. Copying an example of
someone elses success without understanding it with theory can lead to disaster.
By practice of using only visible and measurable figures to judge performance,
company creates another roadblock to implement Demings approach. He
acknowledges the usefulness of figures, but states that focusing on the visible figures
alone is quick route to failure. The end of quarter or year panic leads the management
to manipulate everything to get the right numbers. Other important things like quality,
research, education, are pushed aside by the numbers game.
It can be seen from the Demings theory that he has thought out the matter in great
depth and shows practical wisdom which can be used by the companies worldwide.
8. Explain Malcom Baldrige National Quality award and European Quality
award.
Malcolm Baldrige National Quality Award:
The Malcolm Baldrige National Quality Award is one of three global quality awards
coveted by companies all over the world. While the award is largely US-centric, the
basic parameters for selection of companies have been adapted by several
organisations across the globe to evaluate quality.
The award has been instituted in the memory of Malcolm Baldrige, who served as the
US secretary of commerce for seven years in the Ronald Reagan administration.
Baldrige's award-winning managerial excellence contributed to long-term
improvement in the US economy, and efficiency and effectiveness in the government.
Prior to entering government service, he served as chairman and chief executive
officer of Scovill Inc, where he is credited with leading its transformation from a
financially troubled brass mill to a highly diversified manufacturer of consumer,
housing and industrial goods.
The award is traditionally presented by the president of the United States at a special
ceremony in Washington, D.C., to companies in five categories:
Manufacturing companies
Service companies
TQM & HR
Small business
Health care Organisations
Educational institutions.
The evaluation criteria:
The award is based on an evaluation of companies on various parameters, for which a
scoring system has been devised. These are:
TQM & HR
Malcom Baldrige Award Criteria
Customer and Market focused Strategy and action plans
2
Strategic
Planning
5
Human
Resource
Focus
1
Leadership
7
Business Results
3
Customer
and Market
Focus
6
Process
Management
4
Information and Analysis
Whole companies
Operational units of companies
Small and medium sized companies
Public sector organisations.
TQM & HR
There are four levels of recognition in each category available to Applicants for the
European Quality Award. They are shown below in descending order.
Award Winner
The European Quality Award is presented annually to the organisation judged to be the
best in each of the Award categories providing also they meet all the requirements set
annually by the Award jurors.
Award winners are exceptional organisations - they are European or global role models
in their approaches and the results they achieve. As these are exceptional
organisations, the independent jury does not always identify an Award winner in each
category, further increasing the prestige for those who reach this level.
Every Award winner will be entitled to retain the trophy for a full year and at the end of
this time receive a smaller replica. They are also entitled to use the European Quality
Award winner logo on letterheads, business cards, advertisements, etc.
Prize Winners
Prizes are presented annually to organisations that excel in one or more of the eight
fundamental concepts of Excellence. The new definition of Prizes based on the
fundamental concepts of the EFQM Excellence Model was introduced for five of them
for the fist time in 2003. Now, in 2004, they are extending the recognition at Prize
winner level to cover all of the fundamental concepts in each category in the following
areas:
Leadership and constancy of purpose
Customer focus
Corporate social responsibility
People development and involvement
Results orientation
Management by processes and facts
Continuous learning, innovation and improvement
Partnership development
These Prizes will allow us to identify and celebrate more role models and should be
readily understood by managers in general and the press. It will be possible for an
organisation to win more than one Prize, and for there to be more than one winner of a
Prize where the jury decide there is more than one role model organisation.
Finalists
Each year, several Finalists may be declared in each category. Finalists are
organisations that demonstrate a high degree of Excellence in the management of
quality as their fundamental process for continuous improvement. Finalists receive a
framed certificate and are also entitled to use the European Quality Award Finalist logo
on letterheads, business cards, advertisements etc.
Recognised for Excellence
All Applicants for the Award are asked if they are interested in being recognised at this
level which is the middle level of EFQM Levels of Excellence. Those who achieve a
score in excess of 400 points after site visit are recognised for Excellence. This
indicates that the organisation is well managed and aspires to achieve role model
status.
The European Quality award is used as a self assessment tool. It has nine elements
that have been identified as the key components of business excellence:
TQM & HR
People
Management
10%
Leadership
10%
Policy &
Strategy
10%
Resources
10%
Enablers 50%
People
Satisfaction
9%
Processes
10%
Business
Results
15%
Customer
Satisfaction
10%
Impact on
Society
6%
Results 50%
TQM & HR
pollution. Many different concerns manifest themselves as 'acid rain'. Acid rain,
particularly caused by sulfur-dioxide causes extensive damage to ecosystems. Low
level ozone generation from the release of hydrocarbons from industry and vehicles is
a problem, particularly during summer when sunlight creates a photochemical smog.
Air pollution is cause for many disorders like asthma, bronchitis, eye infections and
headaches.
Water Pollution
Water pollution is caused by nitrates from agricultural operations, discharges from
factories either directly or through water treatment plants, sewage discharges,
spillage of chemicals, run-off from mining and quarrying operations and ground water
contamination due to landfill sites. Classification scheme for river and canal water is
as follows:
Ecosystem Degradation
In pursuit of industrialisation, large scale destruction of geographical regions is
causing massive degradation of the ecosystem. Inadequate planning and poor
management of the resources are resulting in destruction of rain forests and upland
regions. Exploitation of forests for wood (as industrial raw material, fuel and
construction material), mineral extraction and construction of dams for irrigation and
power generation are creating imbalance in the ecosystem.
Environmental concerns
Managements of Business organisations are under constant pressure from various
groups like Legislation, Customers, Markets, Insurance, Public and Media to achieve
and demonstrate sound environmental performance.
Legislation
Organisations need to adhere to the statutory and regulatory requirements applicable
to the country to be in business. There is no equal pressure in all the countries. In
developed and advanced countries, the legislation for protection of environment has
become a high priority. Environmental regulatory bodies, like the Pollution Control
Board play, a significant role in the implementation and monitoring of the legislative
requirements.
Customers
Individual customers and corporate customers would like to purchase products from
manufacturers who are committed to environmental protection. Eco-Label award or
certification to ISO 14000 EMS standards provides confidence to the customers that
the suppliers are committed to environmental protection and improvement.
Market Trends
Environmental issues have influenced the consumption patterns of many products.
Manufacturers need to study the market trends to prepare the business plans. Some
examples of this changing trend are
Usage pattern of pesticides, refrigerants and solvents
Reduction in the use of solvents due to water based alternatives
Alternatives to wood being developed
Usage of sodium hexafluoride as insulating gas under threat
Insurance
Insurance companies are creating pressure on the industry to institute an EMS by
providing tailored insurance policies than general policies. Pollution liability is
restricted to sudden and accidental and no cover for gradual pollution incidents.
Sudden and accidental
-Bhopal, Chernobyl etc.,
Gradual - Disposal of toxic waste by burial
- Leakage of pipes, tanks or pits
- Discharge into streams or rivers
- Release of fumes into atmosphere
Public and Media
Public consisting of local residents, organisation's workforce, investors and insurers,
customers and environmental interest groups like Greenpeace and Friends of the Earth
are creating awareness on environmental issues. Wide usage of the Internet and
TQM & HR
government regulations will lead organisations to provide information on the
environmental performance.
Environmental Management Systems - Need
Organisations of all kinds are increasingly concerned to achieve and demonstrate
sound environmental performance by controlling the impact of their activities,
products and services on the environment taking into consideration their
environmental policy and objectives. The Environmental Management System of an
organisation is expected to meet the following needs:
Meet the regulatory, and legislative requirements
1.Improve the control of the environmental impact
2.Provide confidence to the customers that the products and services are
manufactured with the aim of reducing the negative impact on the environment
3.Suitably accommodate changing market trends and gain competitive edge
4.Reduce the costs associated with environmental liabilities and Insurance Gain public
and media support
Environmental Management Systems - Scope
The Environmental Management System enables an Organisation to formulate policy
and objectives taking into consideration legislative requirements and significant
environmental impacts and specifies the environmental performance criteria. The
scope of the Environmental Management System of an organisation consists of :
* Implement. Maintain and improve EMS.
* Conformance to the stated policies and objectives.
* Demonstrate conformance to the EMS through certification.
Environment Management System of an organisation shall consider the following
issues:
* Improvement to the Quality of life
* Benefits to society
* Commitment to the future generations
* Minimizations of environment risk
* Prevention of pollution
* Environment care and continuous improvements
* Save resources
Environmental Management Systems - Benefits
Environmental Management System benefits the organisation as well as the society.
Significant benefits of the EMS are
TQM & HR
Key elements of Environment Management Systems:
TQM & HR
Any TQM model expects that organisation is socially responsible, fulfilling the
environment management systems as per ISO 14001 any organisation demonstrate
their concern for the environment.
10. Explain the role of HR promoting TQM in an organisation.
TQM is primarily an organizational strategy considered as a change programme to
achieve excellence and therefore HR has an important role to play in designing the
interventions to prepare the people and the organizations for the desired change.
The role of the HR Department in improving quality can be considerable. Broadly, it
can:
Assist in the formulation of the firm's strategic direction and needs.
Identify the human resource philosophies or culture consistent with the business
needs.
Develop and implement policies and activities consistent with the culture.
Ensure that the quality improvement process is consistent with the other human
resource activities.
The HR department can play a significant role in the change process by establishing a
specific programme that is responsible for dealing with the change. This programme
can involve:
Establishing a senior HR council and executive operating committee
Naming a major initiative that rallies all employees to the change
Developing a leadership programme that ensures that the change clearly
includes the top management [ a senior management development
programme].
Additionally, within the HR department there can be further division of roles and
responsibilities. This often involves clarifying the relationship between the corporatelevel HR department and the business unit - level departments. Taking a proactive
stance, the corporate-level department can13:
Assist senior managers in formulating change
Become a model of change
Develop and guide divisional human resource departments
Change organisational structure
Serve as a clearinghouse
Serve as trainer for other HR staff
Do benchmark analysis
Develop HRIS [Human Resource Information System] capacity
Audit competencies
Development of Total Quality People:
The first pillar of TQM is internal customer satisfaction. People involved in each
process have to treat those next in the process as their customer. In addition to the
external customer, every activity in the factory has an internal customer. The service
to the internal customer is the one which will help gear up the organization to deliver
finally the required service to the customer. For example if Marketing dept. deals with
external
customer,
its
commitments
are
to
be
backed up by other departments for whom the marketing dept. itself becomes a
customer. Therefore, all the departments and the people are to be oriented towards
achieving total quality and the attitude of " Help us to help you better " must be
developed on the philosophy of internal customers. Here lies the importance of HR in
developing total quality people i.e. people with positive attitude, values in consonance
with organizational mission and change the mindset so that the foundation becomes
very strong. The HR effort should be to bring in/foster real spirit of TQM i.e. spirit of
reciprocity in interactions and not merely the mechanics of it. The HR initiative in TQM
activity
should
be
oriented
to
demonstrate
the
efficacy of Win-Win relationships as contrasted to Win-Lose or Lose-Lose relationships
and thereby enabling effective spirit of team work.
TQM & HR
Training
HR has also to undertake intensive training of personnel in understanding the
application of TQM methods & its tools. In Japan, this part of applying TQM methods &
tools are very much wide spread & people at all levels starting from top to bottom are
very much conversant with this and apply in all spheres of their activity. HR initiatives
in
this
context
have
to
address in training of personnel in becoming "data minded than opinion minded". The
mindset of " What is wrong" than " Who is wrong" to be generated & built up. Though
it is a formidable task, HR has to trigger this thinking in an organization to realise
thought
revolution
of
TQM
dimension.
Employee Involvement:
Further, HR has to initiate employee involvement in TQM activity. Ultimately, quality is
physically produced by the operator on the shop floor. It is therefore very important
that he understands the quality requirements of his job. This is possible provided his
involvement in the job is very high and he is a very committed and empowered
worker. It is in this context that Japanese have introduced Quality Circles which have
generated high level of commitment of workers and finally helped Japan to become as
world leader in the business. Quality circles are based on the fundamental principles of
collaboration,
involvement & empowerment. HR has to facilitate the culture of team work either in
the form of Quality Circles, Quality Teams, Task force, CFT, Suggestion schemes or any
such others innovative employee involvement schemes for TQM activity.
Education and communication:
Companies place great emphasis on this, through a variety of vehicles videos,
briefing, magazines, newsletters, notice boards, story boards and so on, so as to
promulgate and reinforce the quality message. However its inadequate for senior
management to express their commitment solely through communicating vision and
mission statements.
Recruitment and Selection:
TQM has an effect on selection procedures. Some companies have sophisticated
recruitment and selection techniques, including psychometric and aptitude tests and
assessment centers to identify team workers or problem solvers appropriate to quality
culture.
Appraisal:
Performance appraisal is seen playing an important role as a tool to communicate to
managers whether quality standards are being met, given the importance of the
customer evaluation of managerial performance in the overall appraisal.
Communication and recognition:
Placing so much emphasis on training requires that the company communicate
regularly with employees about the developmental opportunities being offered. These
are more than just communication vehicles. They serve as a means of worker
recognition, which the company takes seriously. Other ways of recognizing employees
include:
Recognition DayAn annual celebration at each location in which individual
employees and teams are recognized publicly for their accomplishments
Incentive Recognition AwardsAn annual monetary award for excellence above
and beyond normal job duties
Seniority Recognition ProgramA program in which every employee receives a
card and small gift on the anniversary of his or her date of hire.
Labor relations:
One of the distinctive features of human resources program is that the program makes
no distinctions between exempt and nonexempt employees. The organization surveys
TQM & HR
union members about their opinions right along with salaried employees. Union
members participate in the employee-suggestion program, and they can attend the
Front-Line Leadership Training regardless of whether or not they have any supervisory
responsibility.
Job design:
Employees are more likely to show commitment when jobs are meaningful and involve
significant responsibility and where employees are able to get direct feedback on their
performance. TQM emphasis on flexibility and teamwork may also require a move
away from detailed fixed job descriptions.
Finally
1) The
2) The
3) The
HR has to create TQM mindset by focusing following three main orientations:customer orientation
process orientation
people orientation.
TQM & HR
HR may also be able to make contribution to TQM at the review level either on regular
basis or part of ongoing procedure for evaluating progress. Such intervention could
include:
1. Contributing to leading the preparation of annual TQM reports.
2. Assuring effectiveness of TQM infrastructure
3. Preparing and administrating employee attitude surveys on TQM
Application Stage:
Finally and to some extent in conjunction with each of these stages, HR function can
apply to TQM to review their own activities along the lines of the undertaken by the
internal contractors as analysed earlier. The precise list of practices depends on
organisation and function involved. Some of them may be:
1. Preparing offer and contract letters within a specified time.
2. Advising staff on their terms and condition of employment
3. Evaluating Training provision on annual basis.
4. Continual review of its activities using the people related criteria in EFQM model
and MBNQA.
Multiple Choice Single Answer
Question Payment Against warranty is :Correct Answer External failure cost
Select The Blank
Question Planning of internal hazardous material & its disposal________.
Correct Answer Contains Planing aspect
True/False
Question Quality is fitness for Purpose
Correct Answer True
Multiple Choice Single Answer
Question Record may be :Correct Answer Procedure to control its use.
Multiple Choice Single Answer
Question ISO is known for :Correct Answer Quality management
Select The Blank
Question The non conforming products are ________.
Correct Answer Identified & controlled
Multiple Choice Multiple Answer
Question The inviromental policy must contain & communicate the :Correct Answer Mission & value with respect to enviroment , Control & improve
enviroment ,
Enviromental impact
True/False
Question Continual improvement which focusses on the improvement of of the EMS,
must be
reviewed every monthefor any changed aspects and impacts.
Correct Answer False
True/False
Question Gap 5 is Gap between expectation & perceived service.
Correct Answer True
TQM & HR
Select The Blank
Question ________organisations are not eligible for MBNQA.
Correct Answer Software
Select The Blank
Question ________ is a strategic effort, directed at attaining business objective, through
preventive action.
Correct Answer Quality
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Multiple Choice Multiple Answer
Question Common elements of winners are :Correct Answer Senior management was actively involved , Control of overall process ,
Focus on
customer
True/False
Question Quality approach is potential failure prevention.
Correct Answer True
Multiple Choice Multiple Answer
Question The mean is :Correct Answer Center of process , Target of process
Multiple Choice Single Answer
Question Integrity means :Correct Answer True to our words
Select The Blank
Question When the process is ________ then it is under control.
Correct Answer Within specification
Multiple Choice Single Answer
Question Which of the following is not process input?
Correct Answer Testing
Select The Blank
Question The planning & implementing Enviromental policy is responsibility of________
Correct Answer Management representative.
Multiple Choice Multiple Answer
Question Which of the following are depicted as the levels of the TQM?
Correct Answer Culture , Management style
Select The Blank
Question Tool is used in TQM implementation is ________.
Correct Answer P -D - C - A
True/False
Question In TQM, approach to employee is to involve people.
Correct Answer True
Multiple Choice Multiple Answer
Question Corrective action means :Correct Answer Action taken on detecting NC , Action taken on observed NC
TQM & HR
Multiple Choice Multiple Answer
Question TQM focus on :Correct Answer Employee , Customer
Multiple Choice Multiple Answer
Question The benefite of ISO 14001 are applicable to :Correct Answer The organisation which adopts it , Adjacent property owner &
environment
True/False
Question Enviroment indudes natural resources.
Correct Answer True
True/False
Question Zero Deviation means product is set on mean.
Correct Answer True
Multiple Choice Single Answer
Question Which revision of ISO is currently in use?
Correct Answer ISO - 9000 -2000
Multiple Choice Single Answer
Question Which type of organization is not eligible for MBNQA?
Correct Answer Manufacturing
Multiple Choice Multiple Answer
Question In parato Analysis, we have to focus on problem which contribute :Correct Answer 80 % Of total problem , 80 % Of causes.
Multiple Choice Single Answer
Question Service characteristic of perish ability means :Correct Answer Service can not store
Select The Blank
Question ________ brings cultural change.
Correct Answer Small improvement
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer Frequency Distribution tool , Data analysis tool
True/False
Question Periodic review of process to be taken to ensure consistency of process.
Correct Answer True
Select The Blank
Question Quality approach is________
Correct Answer Potential failure prevention
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer Training & development
Multiple Choice Multiple Answer
Question Failure Mode & Effect analysis is used as :Correct Answer Prevention tool , Analysis tool
Multiple Choice Single Answer
Question Malcolm Baldrige national quality award is for ( MBNQA ) :-
TQM & HR
Correct Answer Total quality management
Multiple Choice Single Answer
Question In ISO - 90001Quality policy declare by management. Similarly what is
specified in ISO
- 14001?
Correct Answer Enviromrntal Policy
Multiple Choice Single Answer
Question Tally chart is :Correct Answer Data collection tool
Multiple Choice Multiple Answer
Question Factor in GAP 1 is :Correct Answer In sufficient market research , Luck of interaction between
management & customer ,
Luck of communication
Multiple Choice Single Answer
Question TQM approach is:Correct Answer Centered on quality
True/False
Question In TQM "Total" means Total Organization.
Correct Answer True
Multiple Choice Multiple Answer
Question ISO - 14001 gives stress on :Correct Answer Plan - Do -check -Act , Enviromental protection , Prevention rather than
detection
Select The Blank
Question ________ is one of the major business processes.
Correct Answer Customer servive & supply chain
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Multiple Choice Single Answer
Question
The operational control in EMS is :Correct Answer
The process of controlling environment
Multiple Choice Multiple Answer
Question
Factor in GAP 1 is :Correct Answer
In sufficient market research , Luck of interaction between management &
customer , Luck of communication
Multiple Choice Multiple Answer
Question
If some activity are outsourced :Correct Answer
Vendors are assessed on predetermined criteria , Procedure to be followed for
assessing vendor
Select The Blank
Question
While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
TQM & HR
Multiple Choice Single Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect
Multiple Choice Single Answer
Question
In TQM approach towards employee is :Correct Answer
Involve people
Multiple Choice Single Answer
Question
The need fore CMM is :Correct Answer
To ensure that the product is consistent
Multiple Choice Single Answer
Question
ISO 9000 & TQM are :Correct Answer
Supportive to each other
Match The Following
Question
Correct Answer
Your Answer
Continiual improvement
management
Productivity quality - cost
-Delivery
Cut throat competition
Continiual improvement
management
Productivity quality - cost
-Delivery
Cut throat competition
TQM focusses on
Employee
Employee
Quality approch
Pillor of TQM
Correct Answer
True
Multiple Choice Single Answer
Question
Tally chart shows the :Correct Answer
Frequency of event
True/False
Question
Correct Answer
False
Multiple Choice Single Answer
Question
If some of the activities are outsourced :Correct Answer
Vendors are approached on predetermined criteria
Select The Blank
Question
The base of Tqm is________
TQM & HR
Correct Answer
Employee involvement
Multiple Choice Multiple Answer
Question
Measuring instrument should be :Correct Answer
Calibrated , Adjested & Re-Adjested , Properly located
Multiple Choice Single Answer
Question
Which is not part of cost of poor quality ?
Correct Answer
Appraisal cost
Select The Blank
Question
Documents in company are controlled by ________.
Correct Answer
Management Representative
Multiple Choice Single Answer
Question
In ISO - 90001Quality policy declare by management. Similarly what is
specified in ISO - 14001?
Correct Answer
Environmental Policy
Select The Blank
Question
The documents of external origin ________
Correct Answer
Should be controlled separately
Multiple Choice Single Answer
Question
In statistical quality control, primary concern is :Correct Answer
Control
Multiple Choice Multiple Answer
Question
Control chart is :Correct Answer
Process monitoring tool , Process control tool
Multiple Choice Multiple Answer
Question
The records shall be maintained to provide :Correct Answer
Evidence of conformity to requirement , Demonstrate effectiveness of system
True/False
Question
True/False
Question
True/False
Question
Correct Answer
True
Select The Blank
Question
Working together for excellence is ________.
Correct Answer
Team work
Select The Blank
TQM & HR
Question
Correct Answer
Must have procedure for selection
Multiple Choice Multiple Answer
Question
PP & PPK is calculated for :Correct Answer
Initial production run , Initial process setting
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
Excellence means :Correct Answer
Satisfy all customer need
Multiple Choice Multiple Answer
Question
In ISO the focus is on :Correct Answer
Enhancing customer satisfaction , Delighting customer
Multiple Choice Multiple Answer
Question
Leadership style from top to bottom is :Correct Answer
Totally honest & transparent , Providing consistent vision / direction
True/False
Question
Correct Answer
False
Match The Following
Question
Correct Answer
Bureaucratic
Excellence mean
Unlimited thinking
True/False
Question
Your Answer
Correct Answer
True
Select The Blank
Question
Process Quality planning means ________.
Correct Answer
Building quality into processes
Multiple Choice Multiple Answer
Question
Competitive advantage will be achieved by :-
TQM & HR
Correct Answer
Serving customer in excellent fashion , Get in pat from customer & convert in
service , Technological improvement
Select The Blank
Question
Reputation means________.
Correct Answer
Past performance
Select The Blank
Question
________ is important in providing some underpinning of the sense of shared
responsibility.
Correct Answer
Single status
Multiple Choice Multiple Answer
Question
Quality circle encourage :Correct Answer
Participation , Tem work
Multiple Choice Single Answer
Question
While providing service, what is to be remembered is :Correct Answer
One instance of poor service will wash out all properly delivered service.
Select The Blank
Question
The primary responsibility of human Resource is ________
Correct Answer
To provide competent person
True/False
Question
Correct Answer
True
True/False
Question
The quality manual have one Level.
Correct Answer
False
Multiple Choice Single Answer
Question
The management representative is responsible for :Correct Answer
Establishment & implementation of QMS
Multiple Choice Single Answer
Question
According to Deming, Quality problems are :Correct Answer
Due to management
Multiple Choice Multiple Answer
Question
What are main business process objective
Correct Answer
Customer service , Profit & loss
Select The Blank
Question
The TQM approach is based on employee's ________.
Correct Answer
Participation
Multiple Choice Single Answer
Question
The ISO is based on :Correct Answer
Plan - do - check- Act
Multiple Choice Multiple Answer
TQM & HR
Question
Correct Answer
Recruitment & Selection , Training & development , Appraisal
Multiple Choice Single Answer
Question
Mission conveys the massage about what & who is :Correct Answer
Company
Multiple Choice Multiple Answer
Question
Continual improvement is in :Correct Answer
Enviromental objective , Audit Result , Corrective action
Multiple Choice Multiple Answer
Question
If some activity are outsourced :Correct Answer
Vendors are assessed on predetermined criteria , Procedure to be followed for
assessing vendor
Multiple Choice Single Answer
Question
Environment policy must contain :Correct Answer
Mission & core values with respect to the enviroment
True/False
Question
Significant aspect means Perceived Risk.
Correct Answer
True
Select The Blank
Question
________ is responsible for quality objective.
Correct Answer
Top management
Multiple Choice Multiple Answer
Question
The customer requirement to be reviewed :Correct Answer
Before supply of product , Before commitment of supply of product
Multiple Choice Multiple Answer
Question
Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
Select The Blank
Question
Payment Against warranty is________.
Correct Answer
External failure cost
Select The Blank
Question
When the process is in mature stage, it means ________.
Correct Answer
Process is defined
Multiple Choice Multiple Answer
Question
In ISO the focus is on :Correct Answer
Enhancing customer satisfaction , Delighting customer
Select The Blank
Question
________ is calibration activity in company.
Correct Answer
Appraisal cost
TQM & HR
Multiple Choice Single Answer
Question
What is part of cost of poor quality?
Correct Answer
External failure cost
Multiple Choice Multiple Answer
Question
Leadership style from top to bottom is :Correct Answer
Totally honest & transparent , Providing consistent vision / direction
Select The Blank
Question
Diamond represent ________ while plotting flow chart.
Correct Answer
Decision point
True/False
Question
Failure mode & effect Analysis is prevention tool.
Correct Answer
True
Multiple Choice Single Answer
Question
Gap 5 is :Correct Answer
Gap between expectation & perceived service
Select The Blank
Question
Arrow indicates ________.
Correct Answer
Direction of flow
True/False
Question
Quality policy is defined by employee of organisation
Correct Answer
False
True/False
Question
The difference of USL & LSL is range.
Correct Answer
False
Multiple Choice Single Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect
Select The Blank
Question
The primary responsibility of human Resource is ________
Correct Answer
To provide competent person
Multiple Choice Multiple Answer
Question
Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
Match The Following
Question
Correct Answer
Circle symbol
Pareto analysis is
X bar means
Average of reading
Average of reading
Your Answer
TQM & HR
LCT means
TQM & HR
Question
Correct Answer
Your Answer
Dimension
Physical facility
Physical facility
Service characteristic
TQM & HR
Question CMM is applicable to :Correct Answer Software industry
Multiple Choice Multiple Answer
Question What are main business process objective
Correct Answer Customer service , Profit & loss
Multiple Choice Single Answer
Question The documents of external origin :Correct Answer Should be controlled separately
Select The Blank
Question The objective of ISO-9000________
Correct Answer Customer satisfaction
Multiple Choice Multiple Answer
Question Common elements of winners are :Correct Answer Senior management was actively involved , Control of overall
process , Focus on customer
Multiple Choice Single Answer
Question Which is not part of cost of poor quality ?
Correct Answer Appraisal cost
Multiple Choice Multiple Answer
Question Tqm focus on :Correct Answer Employee , Customer
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question Evolution of quality concept. Current era is
Correct Answer Continual Improvement
Multiple Choice Single Answer
Question CMM assumes that :Correct Answer Problems are of managerial nature
Select The Blank
Question Process Quality planning means ________.
Correct Answer Building quality into processes
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Select The Blank
Question Response is________.
Correct Answer Speed
Multiple Choice Single Answer
Question Strategic quality management means :Correct Answer Strategic Improvement
Select The Blank
Question Working together for excellence is ________.
TQM & HR
Correct Answer Team work
Multiple Choice Single Answer
Question Who is responsible for quality objective?
Correct Answer Top management
Select The Blank
Question ________ is the machine down time.
Correct Answer Waste
True/False
Question By Applying basic principle, the process improvement will be in
organization's focuses on work process.
Correct Answer True
True/False
Question The performance process is repeatable level.
Correct Answer True
Multiple Choice Multiple Answer
Question Benefit of model based improvement are :Correct Answer Establish common language , Models are comprehensive
Select The Blank
Question The non conforming products are ________.
Correct Answer Identified & controlled
Select The Blank
Question Arrow indicates ________.
Correct Answer Direction of flow
Multiple Choice Single Answer
Question TQM & ISO both focuses on :Correct Answer Customer
Multiple Choice Multiple Answer
Question Continual improvement is in :Correct Answer Enviromental objective , Audit Result , Corrective action
Multiple Choice Multiple Answer
Question Reliability of product means :Correct Answer Consistency of performance , Performance over period
Multiple Choice Single Answer
Question ISO - 9000- 1994 is :Correct Answer Model for quality Assurance
Multiple Choice Multiple Answer
Question Which of the following are depicted as the levels of the TQM?
Correct Answer Culture , Management style
True/False
Question Leadership from top should be totally honest & transparent in dealing .
Correct Answer True
True/False
Question Enviromental impact is any change to the environment, whether adverse
or beneficial.
TQM & HR
Correct Answer True
True/False
Question ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer True
Multiple Choice Multiple Answer
Question Does TQM approach have relevance to Indian industry in context to
Correct Answer Customer satisfaction , People involvement
True/False
Question The ISO is based on Plan - do - check- Act.
Correct Answer True
Multiple Choice Single Answer
Question If TQM done properly :Correct Answer It brings significant organisational changes
True/False
Question Prevention of pollution is prevention of cause of pollution.
Correct Answer True
Multiple Choice Multiple Answer
Question The benefits of Quality circle can be experienced by :Correct Answer Employees , Organization
True/False
Question Product quality planning should address capability & qualification of
equipment.
Correct Answer True
Multiple Choice Multiple Answer
Question In inspection primary concern is :Correct Answer Detection of Defect , Action on only detected defect
True/False
Question CPK is 1' 33 means four sigma process.
Correct Answer True
Multiple Choice Multiple Answer
Question By Applying basic principle the process improvement will be in
organization's :Correct Answer Focus on work process , Maintain self esteem of other
Select The Blank
Question The supplier must provided ________ information to management.
Correct Answer Adequate
Multiple Choice Multiple Answer
Question Following are the phases of intervention:Correct Answer Formulation stage , Maintenance stage , Implementation stage
Select The Blank
Question ________ is important in providing some underpinning of the sense of
shared responsibility.
Correct Answer Single status
TQM & HR
Select The Blank
Question In ISO the focus on customer is ________
Correct Answer In Enhancing customer satisfaction
Multiple Choice Single Answer
Question Tally chart shows the :Correct Answer Frequency of event
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer Gap between expectation & perceived service
True/False
Question TQM focuses on customer by Delighting customer.
Correct Answer True
Select The Blank
Question TQM promotes________
Correct Answer Team work
True/False
Question TQM approach centered on quality.
Correct Answer True
Select The Blank
Question ISO - 9000- 1994 is ________
Correct Answer Model for quality Assurance
Multiple Choice Multiple Answer
Question Corrective action means :Correct Answer Action taken on detecting NC , Action taken on observed NC
True/False
Question In TQM, approach to employee is to involve people.
Correct Answer True
Multiple Choice Single Answer
Question By adopting TQM philosophy, it benefits to :Correct Answer Organisation & employee
Select The Blank
Question The quality approach is ________
Correct Answer Potential failure prevention
True/False
Question The role of management in QMS is to provide resources.
Correct Answer True
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
Select The Blank
Question The primary responsibility of human Resource is ________
TQM & HR
Correct Answer To provide competent person
Multiple Choice Single Answer
Question The role of management in QMS is :Correct Answer To provide resources
Multiple Choice Single Answer
Question The Design & Development Review to be carried :Correct Answer To evaluate the ability of Design to meet Specification
Select The Blank
Question The evaluation & selection of vendor ________.
Correct Answer Must have procedure for selection
Multiple Choice Single Answer
Question Process capability is :Correct Answer Long term performance of process
True/False
Question The soft side of TQM include Training on job
Correct Answer True
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer Frequency Distribution tool , Data analysis tool
Select The Blank
Question The Design & Development Review to be carried ________
Correct Answer To evaluate ability of product to meet requirements
Select The Blank
Question ________ is a strategic effort, directed at attaining business objective,
through preventive action. Correct Answer Quality
Multiple Choice Single Answer
Question While setting Quality objective, What is to be consider :Correct Answer Customer need
Multiple Choice Multiple Answer
Question The competence of the employee means :Correct Answer Competence of personnel performing work affective quality ,
Evaluale the effectiveness of action taken , Maintain appropriate Record
Select The Blank
Question The base of Tqm is________
Correct Answer Employee involvement
True/False
Question Gap 5 is Gap between expectation & perceived service.
Correct Answer True
Multiple Choice Multiple Answer
Question While recruiting person he should
Correct Answer Competent to perform job , Trained to perform specified job
True/False
Question Process capability is only calculated when it qualify Bell shape curve.
Correct Answer True
TQM & HR
True/False
Question The main business process objective is to serve the customer in excellent
manner.
Correct Answer True
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
Multiple Choice Multiple Answer
Question When cpk is less than one, :Correct Answer Process is not capable , Process is volatile
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Multiple Choice Single Answer
Question Service characteristic is :Correct Answer It is intangible
Multiple Choice Single Answer
Question In control chart, X bar means :Correct Answer Average of Reading
Multiple Choice Single Answer
Question The ISO is based on :Correct Answer Plan - do - check- Act
Multiple Choice Multiple Answer
Question CMM is nothing but :Correct Answer Use of process means , Capability maturity model
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
The customer requirement to be reviewed :Correct Answer
Before supply of product , Before commitment of supply of product
Match The Following
Question
Correct Answer
Your Answer
Dimension
Physical facility
Physical facility
Service characteristic
TQM & HR
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Select The Blank
Question
________ is important in providing some underpinning of the sense of
shared responsibility.
Correct Answer
Single status
Multiple Choice Single Answer
Question
Vender Assessment is :Correct Answer
Appraisal cost
Multiple Choice Multiple Answer
Question
Continual improvement is in :Correct Answer
Enviromental objective , Audit Result , Corrective action
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Select The Blank
Question
The primary responsibility of human Resource is ________
Correct Answer
To provide competent person
Select The Blank
Question
ISO - 9000- 1994 is ________
Correct Answer
Model for quality Assurance
Select The Blank
Question
While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
The documents of external origin :Correct Answer
Should be controlled separately
Multiple Choice Multiple Answer
Question
Employee should be involved in :-
TQM & HR
Correct Answer
Decision making , Participation
Match The Following
Question
Correct Answer
Your Answer
The management
Establishment &
Enhancing customer satisfaction
representative is responsible
implementation
far
of QMS
The management review As & when required
As & when required
conducted
In ISO the focus on customer
Enhancing customer
Supplier satisfaction
satisfaction
Responsibility for quality Top management
Establishment & implementation
objective
of QMS
True/False
Question
Continual improvement which focusses on the improvement of of the
EMS, must be reviewed every monthefor any changed aspects and
impacts.
Correct Answer
False
Select The Blank
Question
The evaluation & selection of vendor ________.
Correct Answer
Must have procedure for selection
Multiple Choice Single Answer
Question
What is document control?
Correct Answer
Document Required by EMS to be controlled
Multiple Choice Multiple Answer
Question
What are critical HR issue ?
Correct Answer
Recruitment & Selection , Training & development , Appraisal
Multiple Choice Multiple Answer
Question
The management review to be conducted :Correct Answer
At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question
Zone in Tolerance means :Correct Answer
Gap between adequate service & desired service , Gap between min &
max expectation
Multiple Choice Single Answer
Question
ISO calls far :Correct Answer
Product approach
True/False
Question
Correct Answer
True
Select The Blank
Question
The TQM approach is based on employee's ________.
Correct Answer
Participation
Multiple Choice Single Answer
Question
In quality Assurance primary concern is:-
TQM & HR
Correct Answer
Co-ordination
Select The Blank
Question
Knowing capability of any process is required to ________.
Correct Answer
Predict the behavior of process
Multiple Choice Multiple Answer
Question
Competitive advantage will be achieved by :Correct Answer
Serving customer in excellent fashion , Get in pat from customer &
convert in service , Technological improvement
Multiple Choice Single Answer
Question
The need fore CMM is :Correct Answer
To ensure that the product is consistent
Multiple Choice Multiple Answer
Question
Multi- disciplinary approach means :Correct Answer
People from different discipline in organization , People from different
department having diff skill
Multiple Choice Multiple Answer
Question
The competence of the employee means :Correct Answer
Competence of personnel performing work affective quality , Evaluale
the effectiveness of action taken , Maintain appropriate Record
Multiple Choice Single Answer
Question
What is core value?
Correct Answer
Excellence
Multiple Choice Single Answer
Question
Calibration Activity in company is :Correct Answer
Appraisal cost
Select The Blank
Question
________organisations are not eligible for MBNQA.
Correct Answer
Software
Multiple Choice Multiple Answer
Question
The role of management is :Correct Answer
To provide Resources , To define EMS , To monitor the effectiveness of
the system
Multiple Choice Single Answer
Question
Process capability is :Correct Answer
Long term performance of process
Multiple Choice Multiple Answer
Question
While setting Goal ,following things to be consider.
Correct Answer
Marketability of product , Organization need
True/False
Question
Correct Answer
False
Multiple Choice Single Answer
TQM & HR
Question
Correct Answer
Centered on quality
Select The Blank
Question
________ provides the competitive advantage.
Correct Answer
Serving customer in excellent fashion
Select The Blank
Question
Arrow indicates ________.
Correct Answer
Direction of flow
True/False
Question
Correct Answer
False
Select The Blank
Question
The supplier must provided ________ information to management.
Correct Answer
Adequate
Multiple Choice Multiple Answer
Question
Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
Select The Blank
Question
While calculating CPK standard deviation is________.
Correct Answer
Estimated
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
Multiple Choice Single Answer
Question
In TQM "Total" refers to :Correct Answer
Total organisation
True/False
Question
Correct Answer
True
Select The Blank
Question
The base of Tqm is________
Correct Answer
Employee involvement
Multiple Choice Multiple Answer
Question
The benefits of Quality circle can be experienced by :Correct Answer
Employees , Organization
True/False
Question
TQM & HR
Correct Answer
True
Multiple Choice Multiple Answer
Question
The inviromental policy must :Correct Answer
Be Relevant to the activity , Comply with legislation , Commits to
prevention of pollution
True/False
Question
Poor service is due to Poor people.
Correct Answer
False
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
Evolution of quality concept. Current era is
Correct Answer
Continual Improvement
Match The Following
TQM & HR
Question
Correct Answer
Your Answer
Process is controlled
Process capability
CMM is
Capability maturity
Capability maturity
Performance is model
respectable
Correct Answer
True
Multiple Choice Multiple Answer
Question
By Applying basic principle the process improvement will be in
organization's :Correct Answer
Focus on work process , Maintain self esteem of other
Multiple Choice Single Answer
Question
ISO emphasis on :Correct Answer
Prevention
Match The Following
Question
Correct Answer
Your Answer
Appraisal cost
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
TQM & HR
Question
Correct Answer
False
Multiple Choice Multiple Answer
Question
Measuring instrument should be :Correct Answer
Calibrated , Adjested & Re-Adjested , Properly located
Select The Blank
Question
In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
True/False
Question
Cause & effect diagram shows relation between causes & its effect.
Correct Answer
True
Multiple Choice Multiple Answer
Question
The evaluation & selection of vendor :Correct Answer
Must have predetermined procedure , Must be assessed
True/False
Question
Correct Answer
False
Multiple Choice Single Answer
Question
TQM is a:Correct Answer
Philosophy
Multiple Choice Multiple Answer
Question
Which are pillar of Tqm :Correct Answer
Morale , Delivery
Multiple Choice Single Answer
Question
The Enviromental policy contains :Correct Answer
Commitment to prevention of pollution
Multiple Choice Multiple Answer
Question
Does TQM approach have relevance to Indian industry in context to
Correct Answer
Customer satisfaction , People involvement
Multiple Choice Multiple Answer
Question
The Quality problems arises :Correct Answer
Due to management , Due to Employee
TQM & HR
Select The Blank
Question
When the process is in mature stage, it means ________.
Correct Answer
Process is defined
Multiple Choice Single Answer
Question
The ISO is based on :Correct Answer
Plan - do - check- Act
Multiple Choice Multiple Answer
Question
In parato Analysis, we have to focus on problem which contribute :Correct Answer
80 % Of total problem , 80 % Of causes.
Select The Blank
Question
________ is the machine down time.
Correct Answer
Waste
Select The Blank
Question
When the process is ________ then it is under control.
Correct Answer
Within specification
Select The Blank
Question
Payment Against warranty is________.
Correct Answer
External failure cost
Select The Blank
Question
The quality approach is ________
Correct Answer
Potential failure prevention
Select The Blank
Question
Reputation means________.
Correct Answer
Past performance
Select The Blank
Question
________ is responsible for quality objective.
Correct Answer
Top management
Multiple Choice Multiple Answer
Question
Type of waste are :Correct Answer
Waiting time , Transport , Processing waste
Multiple Choice Single Answer
Question
Before Accepting the order :Correct Answer
It should be reviewed
Select The Blank
Question
________ brings cultural change.
Correct Answer
Small improvement
Select The Blank
Question
Model used in software industry to check the quality is called________
TQM & HR
Correct Answer
Capability maturity model
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Select The Blank
Question
While calculating PPK standard deviation is________.
Correct Answer
Calculated
Multiple Choice Multiple Answer
Question
The company collect document to :Correct Answer
Demonstrate effectiveness of system , Requirement of QMS
Multiple Choice Single Answer
Question
Total points in MBNQA is :Correct Answer
1000
True/False
Question
Correct Answer
True
Match The Following
Question
Correct Answer
Your Answer
Quality is
As per manufacturer
Japan
True/False
Question
Correct Answer
False
Multiple Choice Multiple Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect , Action on only detected defect
TQM & HR
Multiple Choice Multiple Answer
Question
Corrective action means :Correct Answer
Action taken on detecting NC , Action taken on observed NC
Select The Blank
Question
TQM promotes________
Correct Answer
Team work
Multiple Choice Single Answer
Question
Which is not part of cost of poor quality ?
Correct Answer
Appraisal cost
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
True/False
Question
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
While setting Quality objective, What is to be consider :Correct Answer
Customer need
Multiple Choice Single Answer
Question
In Quality circle, which problems are solved?
Correct Answer
Work related
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
What are main business process objective
Correct Answer
Customer service , Profit & loss
Multiple Choice Single Answer
Question
ISO - 140001 is built upon which of the following?
Correct Answer
Plan - Do - check - Act
Multiple Choice Multiple Answer
Question
Cost of poor quality comprises :-
TQM & HR
Correct Answer
Cost of internal failure , Cost of external failure
Multiple Choice Multiple Answer
Question
Validation of process is required to demonstrate :Correct Answer
Planned results , To verify result
Select The Blank
Question
Working together for excellence is ________.
Correct Answer
Team work
Multiple Choice Multiple Answer
Question
The benefite of ISO 14001 are applicable to :Correct Answer
The organisation which adopts it , Adjacent property owner &
enviroment
Multiple Choice Multiple Answer
Question
Service Assurance is :Correct Answer
Confidence with customer , Customer have trust , Employee have
knowledge
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
If TQM done properly :Correct Answer
It brings significant organisational changes
Multiple Choice Multiple Answer
Question
While recruiting person he should
Correct Answer
Competent to perform job , Trained to perform specified job
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
Reliability of product means :Correct Answer
Consistency of performance , Performance over period
Select The Blank
Question
Quality means________.
Correct Answer
Fitness for use
True/False
Question
TQM & HR
Multiple Choice Single Answer
Question
What is environment?
Correct Answer
Surrounding in which an organization operates.
Multiple Choice Single Answer
Question
Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer
Total quality management
Match The Following
Question
Correct Answer
Your Answer
ISO emphasis on
Prevention
Prevention
ISO
Lead assessor
Correct Answer
True
Multiple Choice Single Answer
Question
In control chart, X bar means :Correct Answer
Average of Reading
Multiple Choice Single Answer
Question
In ISO - 90001Quality policy declare by management. Similarly what is
specified in ISO - 14001?
Correct Answer
Enviromrntal Policy
Select The Blank
Question
ISO - 9000- 1994 is ________
Correct Answer
Model for quality Assurance
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
Dimensions of quality are :Correct Answer
Performance , Feature , Reliability
Select The Blank
Question
Diamond represent ________ while plotting flow chart.
Correct Answer
Decision point
Match The Following
Question
Correct Answer
Your Answer
TQM & HR
Tally chart is
True/False
Question
Correct Answer
True
Select The Blank
Question
Tool is used in TQM implementation is ________.
Correct Answer
P -D - C - A
Select The Blank
Question
Knowing capability of any process is required to ________.
Correct Answer
Predict the behavior of process
True/False
Question
Correct Answer
True
True/False
Question
TQM & HR
Question
Correct Answer
Adequate
Multiple Choice Multiple Answer
Question
The inviromental policy must contain & communicate the :Correct Answer
Mission & value with respect to enviroment , Control & improve
enviroment , Enviromental impact
Multiple Choice Multiple Answer
Question
Quality circle encourage :Correct Answer
Tem work , Participation
Multiple Choice Multiple Answer
Question
Service Assurance is :Correct Answer
Confidence with customer , Customer have trust , Employee have
knowledge
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Multiple Choice Multiple Answer
Question
The management review to be conducted :Correct Answer
At predetermined Interval , As & when required
Multiple Choice Single Answer
Question
Process Quality planning means :Correct Answer
Building quality into processes
Multiple Choice Single Answer
Question
Control chart shows :Correct Answer
Performance of process
Multiple Choice Multiple Answer
Question
Which are pillar of Tqm :Correct Answer
Morale , Delivery
Multiple Choice Multiple Answer
Question
Zone in Tolerance means :Correct Answer
Gap between adequate service & desired service , Gap between min &
max expectation
True/False
Question
Quality policy is defined by employee of organisation
Correct Answer
False
Your Answer False
Multiple Choice Single Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect
Multiple Choice Single Answer
Question
Who is responsible for Deploying quality policy?
TQM & HR
Correct Answer
Top management
Multiple Choice Multiple Answer
Question
Does TQM approach have relevance to Indian industry in context to
Correct Answer
Customer satisfaction , People involvement
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
ISO 9000 & TQM are :Correct Answer
Supportive to each other
Select The Blank
Question
While calculating CPK standard deviation is________.
Correct Answer
Estimated
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
Multiple Choice Single Answer
Question
The quality manual have :Correct Answer
Level 3
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
Cause & Effect diagram used to :Correct Answer
Identify & organize possible causes of problem , Identify possible
causes of problem & determining its relation
True/False
Question
European award is given to any country.
Correct Answer
False
Multiple Choice Single Answer
Question
TQM focuses on :Correct Answer
Customer
True/False
Question
Correct Answer
False
Select The Blank
TQM & HR
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Select The Blank
Question
Response is________.
Correct Answer
Speed
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Select The Blank
Question
In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
Match The Following
Question
Correct Answer
Your Answer
Continiual improvement
management
Productivity quality - cost
-Delivery
Cut throat competition
TQM focusses on
Employee
Quality approch
Pillor of TQM
True/False
Question
TQM & HR
Correct Answer
Formulation stage , Maintenance stage , Implementation stage
Multiple Choice Single Answer
Question
In ISO the focus is on :Correct Answer
Enhancing customer satisfaction
Multiple Choice Single Answer
Question
The variability in process is reduced, then the process become more :-Correct Answer
Predictable
Multiple Choice Single Answer
Question
What is document control?
Correct Answer
Document Required by EMS to be controlled
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
CMM is nothing but :Correct Answer
Use of process means , Capability maturity model
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
CP & CPK is calculated :Correct Answer
To predict future process , To predict future product performance
Select The Blank
Question
The quality approach is ________
Correct Answer
Potential failure prevention
Select The Blank
Question
________ helps organization reduce employee turnover and
absenteeism.
Correct Answer
Training & development
Multiple Choice Single Answer
Question
ISO 14001 is the management representative, responsible for :Correct Answer
Planning and implementing policy
Multiple Choice Single Answer
Question
The human Resource :Correct Answer
Must be competent
Multiple Choice Multiple Answer
Question
Common elements of winners are :Correct Answer
Senior management was actively involved , Control of overall process ,
Focus on customer
Multiple Choice Multiple Answer
TQM & HR
Question
Correct Answer
Consistency of performance , Performance over period
Multiple Choice Single Answer
Question
What CPL indicates ?
Correct Answer
Process capability relative to lower specification limit
Match The Following
Question
Correct Answer
Circle symbol
Pareto analysis is
X bar means
Average of reading
LCT means
Delay in Activity
Your Answer
Correct Answer
True
Multiple Choice Single Answer
Question
When the process is called under control?
Correct Answer
When it is within specification
TQM & HR
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
Benefit of model based improvement are :Correct Answer
Establish common language , Models are comprehensive
Multiple Choice Multiple Answer
Question
Common features of CMM is how to produce software product which are
:Correct Answer
Consistence , Repeatable , Predictable
Select The Blank
Question
The base of Tqm is________
Correct Answer
Employee involvement
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
CMM is use for :Correct Answer
Managing software project
Multiple Choice Single Answer
Question
In business, vision involve :Correct Answer
Mission statement
Multiple Choice Single Answer
Question
Dr. Deming Believes that :Correct Answer
Quality & Productivity walk in hands
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Select The Blank
Question
Planning of internal hazardous material & its disposal________.
TQM & HR
Correct Answer
Contains Planing aspect
Multiple Choice Multiple Answer
Question
By adopting Tqm philosophy, it benefit to :Correct Answer
Organisation , Employee
True/False
Question
Correct Answer
True
Select The Blank
Question
While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
Select The Blank
Question
________ is responsible for quality objective.
Correct Answer
Top management
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
True/False
Question
Correct Answer
False
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Select The Blank
Question
Model used in software industry to check the quality is called________
Correct Answer
Capability maturity model
Multiple Choice Multiple Answer
Question
Need for Tqm is due :Correct Answer
Cut throat competition , Customer requirement
Multiple Choice Single Answer
Question
What is quality policy?
Correct Answer
Overall intention & direction of organization towards quality
Match The Following
Question
Correct Answer
Your Answer
To prevent defect
Ishikawa development
TQM & HR
Type of variation is due to Common causes
Common causes
Correct Answer
False
Multiple Choice Single Answer
Question
What is environment?
Correct Answer
Surrounding in which an organization operates.
Multiple Choice Single Answer
Question
What is EMS?
Correct Answer
Enviromentel management system
Multiple Choice Multiple Answer
Question
PP & PPK is calculated for :Correct Answer
Initial production run , Initial process setting
Match The Following
Question
Correct Answer
Your Answer
Dimension
Physical facility
Service characteristic
Physical facility
TQM & HR
Correct Answer
True
Multiple Choice Multiple Answer
Question
The inviromental policy must contain & communicate the :Correct Answer
Mission & value with respect to enviroment , Control & improve
enviroment , Enviromental impact
Multiple Choice Multiple Answer
Question
The Quality problems arises :Correct Answer
Due to management , Due to Employee
Multiple Choice Multiple Answer
Question
Bar chart is :Correct Answer
Frequency Distribution tool , Data analysis tool
Multiple Choice Multiple Answer
Question
Competitive advantage will be achieved by :Correct Answer
Serving customer in excellent fashion , Get in pat from customer &
convert in service , Technological improvement
Select The Blank
Question
Diamond represent ________ while plotting flow chart.
Correct Answer
Decision point
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Multiple Choice Single Answer
Question
Which of the following is not process input?
Correct Answer
Testing
Multiple Choice Single Answer
Question
Before Accepting the order :Correct Answer
It should be reviewed
Multiple Choice Multiple Answer
Question
The role of management is :Correct Answer
To provide Resources , To define EMS , To monitor the effectiveness of
the system
Multiple Choice Multiple Answer
Question
Tqm focus on :Correct Answer
Employee , Customer
Multiple Choice Multiple Answer
Question
While recruiting person he should
Correct Answer
Competent to perform job , Trained to perform specified job
Multiple Choice Multiple Answer
Question
Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
TQM & HR
Match The Following
Question
Correct Answer
Your Answer
Correct Answer
True
True/False
Question
Correct Answer
False
Select The Blank
Question
________ helps organization reduce employee turnover and
absenteeism.
Correct Answer
Training & development
Multiple Choice Single Answer
Question
The management review is carried :Correct Answer
To ensure effectiveness Of QMS
Multiple Choice Single Answer
Question
While setting Quality objective, What is to be consider :Correct Answer
Customer need
True/False
Question
TQM & HR
Question
Correct Answer
Software
Multiple Choice Single Answer
Question
ISO 14001 is the management representative, responsible for :Correct Answer
Planning and implementing policy
Multiple Choice Multiple Answer
Question
Does TQM approach have relevance to Indian industry in context to
Correct Answer
Customer satisfaction , People involvement
Multiple Choice Single Answer
Question
Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer
Total quality management
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
By Applying basic principle the process improvement will be in
organization's :Correct Answer
Focus on work process , Maintain self esteem of other
True/False
Question
Correct Answer
True
Select The Blank
Question
Reputation means________.
Correct Answer
Past performance
Multiple Choice Multiple Answer
Question
While setting Goal ,following things to be consider.
Correct Answer
Marketability of product , Organization need
Multiple Choice Single Answer
Question
Integrity means :Correct Answer
True to our words
Multiple Choice Single Answer
Question
Documents in company are controlled by :Correct Answer
Management Representative.
Multiple Choice Multiple Answer
Question
PP & PPK is calculated for :Correct Answer
Initial production run , Initial process setting
Select The Blank
Question
The planning & implementing Enviromental policy is responsibility
of________
Correct Answer
Management representative.
TQM & HR
Select The Blank
Question
Payment Against warranty is________.
Correct Answer
External failure cost
True/False
Question
Correct Answer
True
True/False
Question
Correct Answer
True
Select The Blank
Question
Quality means________.
Correct Answer
Fitness for use
True/False
Question
Correct Answer
True
Multiple Choice Multiple Answer
Question
The competence of the employee means :Correct Answer
Competence of personnel performing work affective quality , Evaluale
the effectiveness of action taken , Maintain appropriate Record
Select The Blank
Question
The supplier must provided ________ information to management.
Correct Answer
Adequate
True/False
Question
Correct Answer
True
Select The Blank
Question
TQM emphasises on ________.
Correct Answer
Small improvement
True/False
Question
Correct Answer
True
Multiple Choice Single Answer
Question
What is quality policy?
Correct Answer
Overall intention & direction of organization towards quality
Multiple Choice Multiple Answer
Question
Special characteristic means :Correct Answer
Product characteristic which affect fit/ function / Regulation ,
Characteristic of product which are regulatory requirement.
Select The Blank
Question
TQM emphasises on ________.
TQM & HR
Correct Answer Small improvement
True/False
Question
TQM & HR
Question
Correct Answer
Circle symbol
Pareto analysis is
X bar means
Average of reading
Average of reading
LCT means
True/False
Question
Your Answer
TQM & HR
Correct Answer Unlimited thinking
Select The Blank
Question
Model used in software industry to check the quality is called________
Correct Answer Capability maturity model
Multiple Choice Single Answer
Question
Dr. Deming worked in which country ?
Correct Answer Japan
Multiple Choice Single Answer
Question
The soft side of TQM involve :Correct Answer Training on job
Multiple Choice Multiple Answer
Question
If some activity are outsourced :Correct Answer Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Multiple Choice Single Answer
Question
The management review is carried :Correct Answer To ensure effectiveness Of QMS
True/False
Question
Correct Answer
Your Answer
Employee
Employee
TQM promotes
Employee participation
Employee participation
Kaizen is
Small change
Small change
TQM & HR
Question
TQM & HR
impacts.
Correct Answer
False
True/False
Question
The main business process objective is to serve the customer in excellent
manner.
Correct Answer
True
Multiple Choice Single Answer
Question
Which is not part of cost of poor quality ?
Correct Answer
Appraisal cost
True/False
Question
Business objectives are derived from mission statement.
Correct Answer
True
Multiple Choice Multiple Answer
Question
Control chart is :Correct Answer
Process monitoring tool , Process control tool
Multiple Choice Multiple Answer
Question
Cost of poor quality comprises :Correct Answer
Cost of internal failure , Cost of external failure
Select The Blank
Question
TQM promotes________
Correct Answer
Team work
Select The Blank
Question
The objective of ISO-9000________
Correct Answer
Customer satisfaction
Multiple Choice Multiple Answer
Question
Failure Mode & Effect analysis is used as :Correct Answer
Prevention tool , Analysis tool
Multiple Choice Multiple Answer
Question
Corrective action means :Correct Answer
Action taken on detecting NC , Action taken on observed NC
Select The Blank
Question
Rectangle represent ________ While plotting flow chart.
Correct Answer
Steps in Activity
Multiple Choice Multiple Answer
Question
The customer requirement to be reviewed :Correct Answer
Before supply of product , Before commitment of supply of product
Select The Blank
Question
________ brings cultural change.
Correct Answer
Small improvement
TQM & HR
Multiple Choice Single Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect
Multiple Choice Multiple Answer
Question
Common features of CMM is how to produce software product which
are :Correct Answer
Consistence , Repeatable , Predictable
Multiple Choice Single Answer
Question
According to traditional thinking, quality improvement leads to :Correct Answer
Lower productivity
Multiple Choice Single Answer
Question
What is quality policy?
Correct Answer
Overall intention & direction of organization towards quality
Select The Blank
Question
Circle represent ________ while plotting flow chart.
Correct Answer
Beginning or end of operation
True/False
Question
TQM approach centered on quality.
Correct Answer
True
Match The Following
Question
Correct Answer
Circle symbol
Pareto analysis is
X bar means
Average of reading
Average of reading
LCT means
Your Answer
TQM & HR
Correct Answer
Control
Multiple Choice Single Answer
Question
TQM focuses on :Correct Answer
Customer
Multiple Choice Single Answer
Question
TQM approach is based on :Correct Answer
Participation
Multiple Choice Single Answer
Question
In quality Assurance primary concern is:Correct Answer
Co-ordination
Multiple Choice Multiple Answer
Question
By adopting Tqm philosophy, it benefit to :Correct Answer
Organisation , Employee
Multiple Choice Single Answer
Question
The process evaluation is to identify :Correct Answer
Potential improvement in process
Match The Following
Question
Correct Answer
The management
Establishment &
representative is responsible
implementation
far
of QMS
The management review As & when required
conducted
In ISO the focus on customer
Enhancing customer
satisfaction
Responsibility for quality Top management
objective
Multiple Choice Multiple Answer
Question
The evaluation & selection of vendor :-
Your Answer
Enhancing customer satisfaction
As & when required
Establishment & implementation
of QMS
Top management
Correct Answer
Must have predetermined procedure , Must be assessed
Multiple Choice Multiple Answer
Question
The records shall be maintained to provide :Correct Answer
Evidence of conformity to requirement , Demonstrate effectiveness of
system
Multiple Choice Single Answer
Question
The management representative is responsible for :Correct Answer
Establishment & implementation of QMS
Select The Blank
Question
The primary responsibility of human Resource is ________
Correct Answer
To provide competent person
True/False
Question
In TQM "Total" means Total Organization.
Correct Answer
True
TQM & HR
Select The Blank
Question
The quality approach is ________
Correct Answer
Potential failure prevention
Multiple Choice Single Answer
Question
According to she wart, types of variation are :Correct Answer
As common & special causes
True/False
Question
The quality manual have one Level.
Correct Answer
False
Select The Blank
Question
Intangibility is ________.
Correct Answer
Service is intangible
True/False
Question
The need for TQM is due to Cut throat competition.
Correct Answer
True
Multiple Choice Single Answer
Question
The management review is carried :Correct Answer
To ensure effectiveness Of QMS
True/False
Question
Leadership from top should be totally honest & transparent in dealing .
Correct Answer
True
Multiple Choice Single Answer
Question
Strategic quality management means :Correct Answer
Strategic Improvement
True/False
Question
Documents in company are controlled by Management Representatives.
Correct Answer
True
Multiple Choice Single Answer
Question
In TQM "Total" refers to :Correct Answer
Total organisation
Select The Blank
Question Payment Against warranty is________.
Correct Answer External failure cost
Select The Blank
Question Model used in software industry to check the quality is called________
Correct Answer Capability maturity model
True/False
Question Bar chart shows how data is spread across the range.
Correct Answer True
TQM & HR
Multiple Choice Single Answer
Question Dr. Deming's contribution is in the field of :Correct Answer Quality
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
True/False
Question The European award uses the criteria of efficiency & effectiveness.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question CMM is applicable to :Correct Answer Software industry
Your Answer Software industry
Multiple Choice Multiple Answer
Question The competence of the employee means :Correct Answer Competence of personnel performing work affective quality ,
Evaluale the effectiveness of action taken , Maintain appropriate Record
Your Answer Competence of personnel performing work affective quality , Evaluale
the effectiveness of action taken , Maintain appropriate Record
Multiple Choice Single Answer
Question Process capability is :Correct Answer Long term performance of process
Your Answer Long term performance of process
Select The Blank
Question Any process is to be ________.
Correct Answer Controllable
Your Answer Monitored
Select The Blank
Question The quality approach is ________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
Multiple Choice Single Answer
Question All employee in organization must :Correct Answer Understand & recognize commitment
Your Answer Understand & recognize commitment
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Your Answer Detection of Defect
Select The Blank
Question The enviromental management system followed by organisation is
________.
Correct Answer IS0-14001
Your Answer IS0-9000
Select The Blank
Question In ISO the focus on customer is ________
TQM & HR
Correct Answer In Enhancing customer satisfaction
Your Answer In Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question Process evaluation is to identify :Correct Answer Potential failure prevention , Correctness of product
Your Answer Potential failure prevention , Correctness of product , Verification of
product
True/False
Question Each Environmental objective must be traceable back to the
Environmental Policy statement.
Correct Answer True
Your Answer True
Match The Following
Question Correct Answer Your Answer
Circle symbol Binging or end of operation Binging or end of operation
Pareto analysis is Data analysis told Data analysis told
X bar means Average of reading Average of reading
LCT means Lower control limit Lower control limit
Multiple Choice Single Answer
Question In ISO the focus is on :Correct Answer Enhancing customer satisfaction
Your Answer Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question Leadership style from top to bottom is :Correct Answer Totally honest & transparent , Providing consistent vision / direction
Your Answer Totally honest & transparent , Providing consistent vision / direction
True/False
Question Continious improvement is improvement of inviromental system.
Correct Answer True
Your Answer True
Select The Blank
Question Knowing capability of any process is required to ________.
Correct Answer Predict the behavior of process
Your Answer Draw control chart
Select The Blank
Question ________ is responsible for quality objective.
Correct Answer Top management
Your Answer Quality Assurance
Multiple Choice Single Answer
Question The management review is carried :Correct Answer To ensure effectiveness Of QMS
Your Answer To ensure effectiveness Of QMS
True/False
TQM & HR
Question ISO calls for Product approach.
Correct Answer False
Your Answer True
Select The Blank
Question The base of Tqm is________
Correct Answer Employee involvement
Your Answer Employee involvement
Multiple Choice Multiple Answer
Question The benefits of Quality circle can be experienced by :Correct Answer Employees , Organization
Your Answer Employees , Organization , Management
Multiple Choice Multiple Answer
Question How TQM helps in reducing cost?
Correct Answer By reducing external failure cost , By reducing internal failure
Your Answer By reducing external failure cost , By reducing internal failure , By
avoiding inspection
Multiple Choice Multiple Answer
Question Which of the following are depicted as the levels of the TQM?
Correct Answer Management style , Culture
Your Answer Culture , Management style , Devlopment , Policy management
Multiple Choice Single Answer
Question Which type of organization is not eligible for MBNQA?
Correct Answer Manufacturing
Your Answer Software
True/False
Question ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer True
Your Answer True
Match The Following
Question Correct Answer Your Answer
Tally chart is Data analysis told Data collection tool
True/False
Question Prevention of pollution is prevention of cause of pollution.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question CPK indicate :Correct Answer Process capability of two side process with centre
Your Answer Process capability of two side process with centre
Multiple Choice Single Answer
Question The need for TQM is due to :Correct Answer Cut throat competition
Your Answer Improving profit
True/False
Question In TQM - M stands for Money.
TQM & HR
Correct Answer False
Your Answer False
True/False
Question Cause & effect diagram shows relation between causes & its effect.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Common features of CMM is how to produce software product which are :Correct Answer Consistence , Repeatable , Predictable
Your Answer Consistence , Predictable , User friendly
Multiple Choice Multiple Answer
Question Factor in GAP 1 is :Correct Answer In sufficient market research , Luck of interaction between
management & customer , Luck of communication
Your Answer Luck of interaction between management & customer , Luck of
communication
Select The Blank
Question ________ is one of the major business processes.
Correct Answer Customer servive & supply chain
Your Answer Staff involvement
Multiple Choice Multiple Answer
Question The records shall be maintained to provide :Correct Answer Evidence of conformity to requirement , Demonstrate effectiveness
of system
Your Answer Evidence of conformity to requirement , Demonstrate effectiveness of
system , Easy understanding
Multiple Choice Single Answer
Question ISO 9000 & TQM are :Correct Answer Supportive to each other
Your Answer Supportive to each other
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Your Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question In quality Assurance primary concern is:Correct Answer Co-ordination
Your Answer Detection of Defect.
Multiple Choice Multiple Answer
Question Failure Mode & Effect analysis is used as :Correct Answer Prevention tool , Analysis tool
Your Answer Prevention tool , Analysis tool , Correction tool
Select The Blank
Question Response is________.
Correct Answer Speed
Your Answer Time taken
Multiple Choice Single Answer
TQM & HR
Question Creativity means :Correct Answer Unlimited thinking
Your Answer Unlimited thinking
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer Frequency Distribution tool , Data analysis tool
Your Answer Frequency Distribution tool , Data analysis tool
Multiple Choice Multiple Answer
Question The benefite of ISO 14001 are applicable to :Correct Answer The organisation which adopts it , Adjacent property owner &
enviroment
Your Answer The organisation which adopts it , Adjacent property owner &
enviroment
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer External failure cost
Your Answer External failure cost
Select The Blank
Question The evaluation & selection of vendor ________.
Correct Answer Must have procedure for selection
Your Answer Must have record of document
Multiple Choice Multiple Answer
Question In parato Analysis, we have to focus on problem which contribute :Correct Answer 80 % Of total problem , 80 % Of causes.
Your Answer 80 % Of total problem , 80 % Of causes.
Multiple Choice Multiple Answer
Question Cost of poor quality comprises :Correct Answer Cost of internal failure , Cost of external failure
Your Answer Cost of internal failure , Cost of external failure
Multiple Choice Multiple Answer
Question While setting Goal ,following things to be consider.
Correct Answer Marketability of product , Organization need
Your Answer Customer need , Marketability of product
Multiple Choice Single Answer
Question Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer Total quality management
Your Answer Total quality management
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Following are the phases of intervention:Correct Answer Formulation stage , Maintenance stage , Implementation stage
Your Answer Formulation stage , Maintenance stage , Implementation stage
TQM & HR
Multiple Choice Single Answer
Question The documents of external origin :Correct Answer Should be controlled separately
Your Answer Should be controlled separately
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer Qualified personnel , Leading team of auditor
Your Answer Qualified personnel , Leading team of auditor
Select The Blank
Question While calculating CPK standard deviation is________.
Correct Answer Estimated
Your Answer Estimated
Select The Blank
Question TQM promotes________
Correct Answer Team work
Your Answer Team work
True/False
Question Value is for which customer is paying.
Correct Answer True
Your Answer True
Select The Blank
Question While setting Quality objective, ________ to be considered.
Correct Answer Customer need
Your Answer Customer need
True/False
Question CPK is 1' 33 means four sigma process.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question By adopting TQM philosophy, it benefits to :Correct Answer Organisation & employee
Your Answer Organisation & employee
Multiple Choice Single Answer
Question The process mapping means :Correct Answer The sequence of operation & interaction of process
Your Answer The sequence of operation & interaction of process
True/False
Question Recruitment & Selection are critical HR issue.
Correct Answer True
Your Answer True
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer Training & development
Your Answer Training & development
Multiple Choice Multiple Answer
Question Internal audits to be conducted to check the :-
TQM & HR
Correct Answer Conformance to ISO - 14001 , Conformance of system for
effectiveness , Stuatutory Requirement
Your Answer Conformance of system for effectiveness , Management review
Match The Following
Question Correct Answer Your Answer
Process is managed level Performance is model respectable Process is controlled
Critical process maturity concept include Process capability Process capability
Managed level of process Process is controlled Performance is model respectable
CMM is Capability maturity Capability maturity
Multiple Choice Single Answer
Question Mission conveys the massage about what & who is :Correct Answer Company
Your Answer Company
Select The Blank
Question Quality means________.
Correct Answer Fitness for use
Your Answer Fitness for use
Select The Blank
Question ________ is important in providing some underpinning of the sense of
shared responsibility.
Correct Answer Single status
Your Answer Training & development
Select The Blank
Question The planning & implementing Enviromental policy is responsibility
of________
Correct Answer Management representative.
Your Answer Management representative.
Select The Blank
Question While calculating PPK standard deviation is________.
Correct Answer Calculated
Your Answer Calculated
Select The Blank
Question Arrow indicates ________.
Correct Answer Direction of flow
Your Answer Direction of flow
True/False
Question Leadership from top should be totally honest & transparent in dealing .
Correct Answer True
Your Answer True
True/False
Question Lead assessor is Qualified personnel.
Correct Answer True
Your Answer True
TQM & HR
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Your Answer Continual improvement , Prevention of defect
True/False
Question ISO is Quality management system.
Correct Answer True
Your Answer True
True/False
Question Quality is fitness for Purpose
Correct Answer True
Your Answer True
True/False
Question By Applying basic principle, the process improvement will be in
organization's focuses on work process.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question TQM culture is :Correct Answer Continuous improvement
Your Answer Long term improvement
Match The Following
Question Correct Answer Your Answer
The quality manual have Level 3 Level 3
The process mapping The sequence of operation & interaction of process The
sequence of operation & interaction of process
The role of management in QMS To provide resources To provide resources
Activities outsourced Vendors are assessed based on predetermined criteria Vendors
are assessed based on predetermined criteria
Multiple Choice Single Answer
Question Dr. Deming worked in which country ?
Correct Answer Japan
Your Answer Japan
Multiple Choice Single Answer
Question Analysis is :Correct Answer Process monitoring tool
Your Answer Process monitoring tool
True/False
Question Enviroment indudes natural resources.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
TQM & HR
Your Answer Management Representative.
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer Gap between expectation & perceived service
Your Answer Gap between expectation & perceived service
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Your Answer At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question The role of management is :Correct Answer To provide Resources , To define EMS , To monitor the effectiveness
of the system
Your Answer To provide Resources , To monitor the effectiveness of the system , To
provide mission
Multiple Choice Single Answer
Question The operational control in EMS is :Correct Answer The process of controlling environment
Your Answer The process of controlling environmental system
Select The Blank
Question Planning of internal hazardous material & its disposal________.
Correct Answer Contains Planing aspect
Your Answer Contains Planing aspect
Multiple Choice Multiple Answer
Question The company collect document to :Correct Answer Demonstrate effectiveness of system , Requirement of QMS
Your Answer Demonstrate effectiveness of system , To analyses , To preserve it
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Multiple Answer
Question The role of management is :Correct Answer To monitor the effectiveness of the system , To provide Resources ,
To define EMS
Your Answer To monitor the effectiveness of the system , To provide mission
Multiple Choice Single Answer
Question Excellence means :Correct Answer Satisfy all customer need
Your Answer Satisfy all customer need
Multiple Choice Multiple Answer
Question Reliability of product means :Correct Answer Consistency of performance , Performance over period
Your Answer Consistency of performance , Performance over period , Useful life
True/False
Question The main business process objective is to serve the customer in excellent
manner.
Correct Answer True
Your Answer True
TQM & HR
Select The Blank
Question ________ is a strategic effort, directed at attaining business objective,
through preventive action.
Correct Answer Quality
Your Answer Quality
True/False
Question The soft side of TQM include Training on job
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Cost of poor quality comprises :Correct Answer Cost of internal failure , Cost of external failure
Your Answer Cost of internal failure , Cost of external failure
Multiple Choice Single Answer
Question In TQM - M stands for :Correct Answer Management
Your Answer Management
True/False
Question The control of enviromental aspect Life side analysis.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Which is not pillar of TQM
Correct Answer Finance
Your Answer Productivity
Multiple Choice Multiple Answer
Question When cpk is less than one, :Correct Answer Process is not capable , Process is volatile
Your Answer Process is not capable
Multiple Choice Multiple Answer
Question If some activity are outsourced :Correct Answer Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Your Answer Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Multiple Choice Single Answer
Question CMM is applicable to :Correct Answer Software industry
Your Answer Software industry
True/False
Question Continual improvement which focusses on the improvement of of the EMS,
must be reviewed every monthefor any changed aspects and
impacts.
Correct Answer False
Your Answer False
Multiple Choice Multiple Answer
Question Process evaluation is to identify :Correct Answer Potential failure prevention , Correctness of product
TQM & HR
Your Answer Potential failure prevention , Correctness of product , Verification of
product
True/False
Question TQM approach is based on Participation.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Your Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question ISO 14001 is the management representative, responsible for :Correct Answer Planning and implementing policy
Your Answer Planning and implementing policy
True/False
Question The process mapping means sequence & interaction of process.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer Gap between expectation & perceived service
Your Answer Gap between expectation & perceived service
Match The Following
Question Correct Answer Your Answer
Dimension Physical facility Physical facility
Service characteristic Vary from time to time . Vary from time to time.
Customer satisfaction survey To assess customer satisfaction level To assess customer
satisfaction level
Poor service is due to Inadequate resource Inadequate resource
Multiple Choice Multiple Answer
Question Does TQM approach have relevance to Indian industry in context to
Correct Answer Customer satisfaction , People involvement
Your Answer Customer satisfaction , People involvement , Policy management
True/False
Question In TQM "Total" means Total Organization.
Correct Answer True
Your Answer True
Select The Blank
Question When the process is ________ then it is under control.
Correct Answer Within specification
Your Answer Within specification
Select The Blank
Question ISO - 9000- 1994 is ________
Correct Answer Model for quality Assurance
Your Answer Model for quality Assurance
TQM & HR
Multiple Choice Single Answer
Question If TQM done properly :Correct Answer It brings significant organisational changes
Your Answer It brings significant organisational changes
Multiple Choice Multiple Answer
Question The inviromental policy must :Correct Answer Comply with legislation , Commits to prevention of pollution , Be
Relevant to the activity
Your Answer Be Relevant to the activity , Comply with legislation ,Commits to
prevention of pollution
True/False
Question Bar chart shows how data is spread across the range.
Correct Answer True
Your Answer False
Select The Blank
Question ________ is the machine down time.
Correct Answer Waste
Your Answer Waste
Select The Blank
Question Response is________.
Correct Answer Speed
Your Answer Service
Select The Blank
Question Diamond represent ________ while plotting flow chart.
Correct Answer Decision point
Your Answer Decision point
Select The Blank
Question TQM emphasises on ________.
Correct Answer Small improvement
Your Answer Continuous improvement
Multiple Choice Single Answer
Question Range is :Correct Answer Difference of minimum & maximum
Your Answer Diff of highest & lowest
Multiple Choice Multiple Answer
Question What are main business process objective
Correct Answer Customer service , Profit & loss
Your Answer Customer service , New product , Profit & loss
Multiple Choice Single Answer
Question Which is not Business objectivity?
Correct Answer Supplier satisfaction
Your Answer Supplier satisfaction
Select The Blank
Question ________ is calibration activity in company.
Correct Answer Appraisal cost
Your Answer Appraisal cost
Match The Following
TQM & HR
Question Correct Answer Your Answer
MBQA is eligible for Manufacturing organization Manufacturing organization
Malcolm baldring award seeks improvement in Quality & productivity Quality &
productivity
European quality award is for Improving efficiency Improving efficiency
Common elements of winners are Senior management was activity involved Senior
management was activity involved
Multiple Choice Single Answer
Question Integrity means :Correct Answer True to our words
Your Answer True to our words
Multiple Choice Single Answer
Question Enviromental impact is :Correct Answer Any change to envioment resulting from organization activity
Your Answer Any change to envioment resulting from organization activity
Multiple Choice Single Answer
Question Quality planning is :Correct Answer Prevention cost
Your Answer Prevention cost
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer Training & development
Your Answer Training & development
Select The Blank
Question The supplier must provided ________ information to management.
Correct Answer Adequate
Your Answer Adequate
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer Qualified personnel , Leading team of auditor
Your Answer Qualified personnel , Leading team of auditor
tqm n hr
True/False
Question When process improvements are institutionlized, the process is optimized
level
Correct Answer False
Your Answer True
Select The Blank
Question Quality approach is________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
TQM & HR
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Your Answer Continual improvement , Prevention of defect , Service
Multiple Choice Multiple Answer
Question
By Applying basic principle the process improvement will be in
organization's :Correct Answer
Focus on work process , Maintain self esteem of other
Your Answer Focus on work process , Good Decision making
True/False
Question
Correct Answer
Your Answer
Appraisal cost
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
True/False
Question
TQM & HR
Your Answer Morale , Training , Development
Select The Blank
Question
In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
Your Answer In Enhancing customer satisfaction
Multiple Choice Single Answer
Question
Enviromental impact is :Correct Answer
Any change to envioment resulting from organization activity
Your Answer Any change to envioment resulting from organization activity
Multiple Choice Multiple Answer
Question
Dimensions of quality are :Correct Answer
Performance , Feature , Reliability
Your Answer Performance , Feature , Reliability
Multiple Choice Single Answer
Question
The Enviromental policy contains :Correct Answer
Commitment to prevention of pollution
Your Answer Commitment to prevention of pollution
Multiple Choice Single Answer
Question
Analysis is :Correct Answer
Process monitoring tool
Your Answer Data analysis tool
True/False
Question
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
Common features of CMM is how to produce software product which are :Correct Answer
Consistence , Repeatable , Predictable
Your Answer Consistence , Repeatable , Predictable
Multiple Choice Single Answer
Question
The need fore CMM is :-
TQM & HR
Correct Answer
To ensure that the product is consistent
Your Answer To ensure that the product is consistent
Select The Blank
Question
Any process is to be ________.
Correct Answer
Controllable
Your Answer Monitored
Select The Blank
Question
The management review to be conducted ________.
Correct Answer
At predetermined interval
Your Answer At predetermined interval
Multiple Choice Multiple Answer
Question
Service Assurance is :Correct Answer
Confidence with customer , Customer have trust , Employee have knowledge
Your Answer Customer have trust , Employee have knowledge
Multiple Choice Multiple Answer
Question
CP & CPK is calculated :Correct Answer
To predict future process , To predict future product performance
Your Answer To predict future process , To predict future product performance
Multiple Choice Single Answer
Question
What is core value?
Correct Answer
Excellence
Your Answer Excellence
True/False
Question
Correct Answer
True
Your Answer False
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
Your Answer Potential failure prevention
Select The Blank
TQM & HR
Question
Correct Answer
Customer need
Your Answer Customer need
Multiple Choice Multiple Answer
Question
The benefits of Quality circle can be experienced by :Correct Answer
Employees , Organization
Your Answer Employees , Organization , Management
Match The Following
Question
Correct Answer
Your Answer
Process capability
CMM is
True/False
Question
Capability maturity
Process is controlled
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Your Answer To provide resources , To provide guidance , To provide Direction
Multiple Choice Single Answer
Question
TQM is aiming :Correct Answer
Long term success
Your Answer Long term success
Multiple Choice Multiple Answer
Question
Measuring instrument should be :Correct Answer
Calibrated , Adjested & Re-Adjested , Properly located
Your Answer Calibrated , Adjested & Re-Adjested , Properly located
Multiple Choice Single Answer
Question
Dr. Deming worked in which country ?
TQM & HR
Correct Answer
Japan
Your Answer Japan
True/False
Question
Correct Answer
True
Your Answer True
True/False
Question
True/False
Question
Correct Answer
True
Your Answer True
True/False
Question
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
The ISO is based on :Correct Answer
Plan - Do - check - Act , Continual improvement
Your Answer Plan - Do - check - Act , Continual improvement
Multiple Choice Single Answer
Question
The management review to be conducted :Correct Answer
As & when required
Your Answer At predetermined interval
Select The Blank
Question
TQM emphasises on ________.
Correct Answer
Small improvement
Your Answer Continuous improvement
Multiple Choice Single Answer
TQM & HR
Question
Correct Answer
Understand & recognize commitment
Your Answer Understand & recognize commitment
Multiple Choice Single Answer
Question
In ISO the focus is on :Correct Answer
Enhancing customer satisfaction
Your Answer Enhancing customer satisfaction
True/False
Question
Correct Answer
False
Your Answer False
Select The Blank
Question
Model used in software industry to check the quality is called________
Correct Answer
Capability maturity model
Your Answer Capability maturity model
Select The Blank
Question
Circle represent ________ while plotting flow chart.
Correct Answer
Beginning or end of operation
Your Answer Beginning or end of operation
Select The Blank
Question
The quality approach is ________
Correct Answer
Potential failure prevention
Your Answer Potential failure prevention
Select The Blank
Question
ISO - 9000- 1994 is ________
Correct Answer
Model for quality Assurance
Your Answer Quality management system
Multiple Choice Multiple Answer
Question
Control chart is :Correct Answer
Process monitoring tool , Process control tool
Your Answer Process monitoring tool , Process control tool
TQM & HR
Select The Blank
Question
________ is the machine down time.
Correct Answer
Waste
Your Answer Waste
Multiple Choice Single Answer
Question
While calculating PPK standard deviation is :Correct Answer
Calculated
Your Answer Calculated
Multiple Choice Single Answer
Question
Payment Against warranty is :Correct Answer
External failure cost
Your Answer External failure cost
Select The Blank
Question
Planning of internal hazardous material & its disposal________.
Correct Answer
Contains Planing aspect
Your Answer Planning of inveroment
Match The Following
Question
Correct Answer
Your Answer
Correct Answer
True
Your Answer True
Multiple Choice Single Answer
Question
Record may be :Correct Answer
Procedure to control its use.
Your Answer An evidence to conformity
TQM & HR
Multiple Choice Single Answer
Question
ISO is known for :Correct Answer
Quality management
Your Answer Quality management
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Your Answer Identified & controlled
Multiple Choice Multiple Answer
Question
The inviromental policy must contain & communicate the :Correct Answer
Mission & value with respect to enviroment , Control & improve enviroment ,
Enviromental impact
Your Answer Mission & value with respect to enviroment , Control & improve enviroment ,
Enviromental impact
True/False
Question
True/False
Question
Correct Answer
True
Your Answer True
Select The Blank
Question
________organisations are not eligible for MBNQA.
Correct Answer
Software
Your Answer Software
Select The Blank
Question
________ is a strategic effort, directed at attaining business objective, through
preventive action.
Correct Answer
Quality
Your Answer Quality
True/False
Question
Correct Answer
True
TQM & HR
Your Answer True
Multiple Choice Multiple Answer
Question
Common elements of winners are :Correct Answer
Senior management was actively involved , Control of overall process , Focus
on customer
Your Answer Senior management was actively involved , Control of overall process , Focus
on customer
True/False
Question
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
The mean is :Correct Answer
Center of process , Target of process
Your Answer Center of process , Target of process
Multiple Choice Single Answer
Question
Integrity means :Correct Answer
True to our words
Your Answer True to our words
Select The Blank
Question
When the process is ________ then it is under control.
Correct Answer
Within specification
Your Answer Within specification
Multiple Choice Single Answer
Question
Which of the following is not process input?
Correct Answer
Testing
Your Answer Testing
Select The Blank
Question
The planning & implementing Enviromental policy is responsibility of________
Correct Answer
Management representative.
Your Answer Management representative.
Multiple Choice Multiple Answer
Question
Which of the following are depicted as the levels of the TQM?
TQM & HR
Correct Answer
Culture , Management style
Your Answer Culture , Management style
Select The Blank
Question
Tool is used in TQM implementation is ________.
Correct Answer
P -D - C - A
Your Answer Quality circle
True/False
Question
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
Corrective action means :Correct Answer
Action taken on detecting NC , Action taken on observed NC
Your Answer Action taken on detecting NC , Action taken on observed NC , Action taken on
defects
Multiple Choice Multiple Answer
Question
Tqm focus on :Correct Answer
Employee , Customer
Your Answer Employee , Customer , Management
Multiple Choice Multiple Answer
Question
The benefite of ISO 14001 are applicable to :Correct Answer
The organisation which adopts it , Adjacent property owner & enviroment
Your Answer The organisation which adopts it , Adjacent property owner & enviroment
True/False
Question
Correct Answer
True
Your Answer True
True/False
Question
Correct Answer
True
Your Answer True
Multiple Choice Single Answer
TQM & HR
Question
Correct Answer
ISO - 9000 -2000
Your Answer ISO - 9000 -2000
Multiple Choice Single Answer
Question
Which type of organization is not eligible for MBNQA?
Correct Answer
Manufacturing
Your Answer Software
Multiple Choice Multiple Answer
Question
In parato Analysis, we have to focus on problem which contribute :Correct Answer
80 % Of total problem , 80 % Of causes.
Your Answer 80 % Of total problem , 20 % Of total problem
Multiple Choice Single Answer
Question
Service characteristic of perish ability means :Correct Answer
Service can not store
Your Answer It have limited shelf life
Select The Blank
Question
________ brings cultural change.
Correct Answer
Small improvement
Your Answer Continuous improvement
Multiple Choice Multiple Answer
Question
Bar chart is :Correct Answer
Frequency Distribution tool , Data analysis tool
Your Answer Prevention tool , Process control tool
True/False
Question
Correct Answer
True
Your Answer True
Select The Blank
Question
Quality approach is________
Correct Answer
Potential failure prevention
Your Answer Potential failure prevention
TQM & HR
Select The Blank
Question
________ helps organization reduce employee turnover and absenteeism.
Correct Answer
Training & development
Your Answer Training & development
Multiple Choice Multiple Answer
Question
Failure Mode & Effect analysis is used as :Correct Answer
Prevention tool , Analysis tool
Your Answer Correction tool , Inspection tool
Multiple Choice Single Answer
Question
Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer
Total quality management
Your Answer Total quality management
Multiple Choice Single Answer
Question
In ISO - 90001Quality policy declare by management. Similarly what is
specified in ISO - 14001?
Correct Answer
Enviromrntal Policy
Your Answer Enviromrntal Policy
Multiple Choice Single Answer
Question
Tally chart is :Correct Answer
Data collection tool
Your Answer Data analysis tool
Multiple Choice Multiple Answer
Question
Factor in GAP 1 is :Correct Answer
In sufficient market research , Luck of interaction between management &
customer , Luck of communication
Your Answer In sufficient market research , Luck of interaction between management &
customer , Gap between expectation & Perception
Multiple Choice Single Answer
Question
TQM approach is:Correct Answer
Centered on quality
Your Answer Centered on quality
True/False
Question
TQM & HR
Correct Answer
True
Your Answer True
Match The Following
Question
Correct Answer
Your Answer
TQM promotes
Employee participation
Employee participation
Kaizen is
Small change
Small change
TQM & HR
Question
Correct Answer
External failure cost
Your Answer External failure cost
Select The Blank
Question
The non conforming products are ________.
Correct Answer
Identified & controlled
Your Answer Identified & controlled
Multiple Choice Single Answer
Question
Who is responsible for quality objective?
Correct Answer
Top management
Your Answer Top management
Multiple Choice Single Answer
Question
Which is not Business objectivity?
Correct Answer
Supplier satisfaction
Your Answer Supplier satisfaction
Multiple Choice Multiple Answer
Question
Competitive advantage will be achieved by :Correct Answer
Serving customer in excellent fashion , Get in pat from customer & convert in
service , Technological improvement
Your Answer Serving customer in excellent fashion , Get in pat from customer & convert in
service , Technological improvement
Multiple Choice Single Answer
Question
Strategic quality management means :Correct Answer
Strategic Improvement
Your Answer Detection of Defect.
Multiple Choice Single Answer
Question
ISO 9000 & TQM are :Correct Answer
Supportive to each other
Your Answer Supportive to each other
Multiple Choice Single Answer
Question
In statistical quality control, primary concern is :Correct Answer
Control
Your Answer Control
TQM & HR
Match The Following
Question
Correct Answer
Your Answer
TQM & HR
Multiple Choice Multiple Answer
Question
By Applying basic principle the process improvement will be in organization's :Correct Answer
Focus on work process , Maintain self esteem of other
Your Answer Focus on work process , Maintain self esteem of other
True/False
Question
Periodic review of process to be taken to ensure consistency of process.
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
The mean is :Correct Answer
Center of process , Target of process
Your Answer Center of process , Target of process
Multiple Choice Single Answer
Question
In quality Assurance primary concern is:Correct Answer
Co-ordination
Your Answer Co-ordination
Multiple Choice Single Answer
Question
Evolution of quality concept. Current era is
Correct Answer
Continual Improvement
Your Answer Continual Improvement
Match The Following
Question
Correct Answer
Your Answer
Appraisal cost
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
TQM & HR
Question
Correct Answer
Training & development
Your Answer Training & development
Multiple Choice Single Answer
Question
Quality planning is :Correct Answer
Prevention cost
Your Answer Prevention cost
Select The Blank
Question
Response is________.
Correct Answer
Speed
Your Answer Speed
Select The Blank
Question
The management review to be conducted ________.
Correct Answer
At predetermined interval
Your Answer At predetermined interval
True/False
Question
Value is for which customer is paying.
Correct Answer
True
Your Answer True
Multiple Choice Single Answer
Question
Analysis is :Correct Answer
Process monitoring tool
Your Answer Prevention tool
Multiple Choice Multiple Answer
Question
The Quality problems arises :Correct Answer
Due to management , Due to Employee
Your Answer Due to management , Due to method
Select The Blank
Question
The documents of external origin ________
Correct Answer
Should be controlled separately
Your Answer Should be controlled separately
TQM & HR
Multiple Choice Single Answer
Question
Control chart shows :Correct Answer
Performance of process
Your Answer Performance of process
Multiple Choice Single Answer
Question
In inspection primary concern is :Correct Answer
Detection of Defect
Your Answer Detection of Defect
True/False
Question
Quality circle encourages Employee Participation.
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
Continual improvement is in :Correct Answer
Enviromental objective , Audit Result , Corrective action
Your Answer Enviromental objective , Audit Result , Corrective action
Multiple Choice Multiple Answer
Question
Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
Your Answer Qualified personnel , Leading team of auditor
Select The Blank
Question
The quality approach is ________
Correct Answer
Potential failure prevention
Your Answer Potential failure prevention
True/False
Question
ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer
True
Your Answer True
True/False
Question
Failure mode & effect Analysis is prevention tool.
Correct Answer
True
Your Answer True
TQM & HR
Multiple Choice Single Answer
Question
TQM focuses on :Correct Answer
Customer
Your Answer Customer
True/False
Question
Lead assessor is Qualified personnel.
Correct Answer
True
Your Answer True
True/False
Question
ISO calls for Product approach.
Correct Answer
False
Your Answer False
True/False
Question
Gap 5 is Gap between expectation & perceived service.
Correct Answer
True
Your Answer True
Multiple Choice Multiple Answer
Question
Quality circle encourage :Correct Answer
Participation , Tem work
Your Answer Participation , Tem work
Multiple Choice Multiple Answer
Question
The role of management in QMS is :Correct Answer
To provide resources , To provide support
Your Answer To provide resources , To provide support
Multiple Choice Single Answer
Question Incoming material inspection is :Correct Answer Appraisal cost
Your Answer Appraisal cost
True/False
Question Significant aspect means Perceived Risk.
Correct Answer True
Your Answer True
Select The Blank
Question In ISO the focus on customer is ________
TQM & HR
Correct Answer In Enhancing customer satisfaction
Your Answer In Enhancing customer satisfaction
Multiple Choice Single Answer
Question ISO emphasis on :Correct Answer Prevention
Your Answer Prevention
Select The Blank
Question Quality approach is________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
Multiple Choice Multiple Answer
Question What are critical HR issue ?
Correct Answer Recruitment & Selection , Training & development , Appraisal
Your Answer Recruitment & Selection , Training & development , Appraisal
Select The Blank
Question Documents in company are controlled by ________.
Correct Answer Management Representative
Your Answer Management Representative
Select The Blank
Question ________ is calibration activity in company.
Correct Answer Appraisal cost
Your Answer Appraisal cost
Match The Following
Question Correct Answer Your Answer
The difference ppk & cpk Method of calculating Std. Deviation Method of calculating
Std. Deviation
Process capability is Device to find out Whether process follows natural variation or
not Whether process follows natural variation or not
PPK is device when To establish initial process specification To establish initial process
specification
Capability of any process To predict the behavior of processes To predict the behavior
of processes
True/False
Question Enviroment indudes natural resources.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
Your Answer Control
Multiple Choice Single Answer
Question Service characteristic of perish ability means :Correct Answer Service can not store
Your Answer Service can not store
TQM & HR
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Your Answer Continual improvement , Prevention of defect
Multiple Choice Single Answer
Question Who is responsible for quality objective?
Correct Answer Top management
Your Answer Top management
Multiple Choice Multiple Answer
Question In inspection primary concern is :Correct Answer Detection of Defect , Action on only detected defect
Your Answer Detection of Defect , Action on only detected defect
Multiple Choice Multiple Answer
Question In ISO the focus is on :Correct Answer Enhancing customer satisfaction , Delighting customer
Your Answer Enhancing customer satisfaction , Delighting customer
Multiple Choice Single Answer
Question In quality Assurance primary concern is:Correct Answer Co-ordination
Your Answer Co-ordination
Select The Blank
Question Response is________.
Correct Answer Speed
Your Answer Speed
True/False
Question Gap 5 is Gap between expectation & perceived service.
Correct Answer True
Your Answer True
Select The Blank
Question Quality means________.
Correct Answer Fitness for use
Your Answer Meeting of excellence
Multiple Choice Single Answer
Question Evolution of quality concept. Current era is
Correct Answer Continual Improvement
Your Answer Continual Improvement
Multiple Choice Single Answer
Question Strategic quality management means :Correct Answer Strategic Improvement
Your Answer Strategic Improvement
Multiple Choice Multiple Answer
Question The ISO is based on :Correct Answer Plan - Do - check - Act , Continual improvement
Your Answer Plan - Do - check - Act , Continual improvement
Select The Blank
Question The quality approach is ________
TQM & HR
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
True/False
Question Quality approach is potential failure prevention.
Correct Answer True
Your Answer True
Select The Blank
Question The management review to be conducted ________.
Correct Answer At predetermined interval
Your Answer At predetermined interval
True/False
Question The quality manual have one Level.
Correct Answer False
Your Answer False
Select The Blank
Question Model used in software industry to check the quality is called________
Correct Answer Capability maturity model
Your Answer Capability maturity model
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Your Answer Detection of Defect
Multiple Choice Single Answer
Question In TQM - M stands for :Correct Answer Management
Your Answer Management
Multiple Choice Multiple Answer
Question When cpk is less than one, :Correct Answer Process is volatile , Process is not capable
Your Answer Process is not capable , Process is volatile
Select The Blank
Question The objective of ISO-9000________
Correct Answer Customer satisfaction
Your Answer Customer satisfaction
True/False
Question Training helps organization Reduces employee' turnover.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Your Answer At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question Continual improvement is in :Correct Answer Enviromental objective , Audit Result , Corrective action
Your Answer Enviromental objective , Audit Result , Corrective action
TQM & HR
Multiple Choice Multiple Answer
Question Reliability of product means :Correct Answer Consistency of performance , Performance over period
Your Answer Consistency of performance , Performance over period
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
Your Answer Management Representative.
Multiple Choice Single Answer
Question Which is not part of cost of poor quality ?
Correct Answer Appraisal cost
Your Answer Manufacturing cost
Match The Following
Question Correct Answer Your Answer
Quality approach is Potential failure prevention Potential failure prevention
TQM approach is Employee participation Employee participation
TQM & ISO both focuses on Customer satisfaction Customer satisfaction
Which tool is used in implementing ISO-9000 P - D - C - A P - D - C - A
True/False
Question Physical facilities is tangible dimension.
Correct Answer True
Your Answer True
True/False
Question Product quality planning should address capability & qualification of
equipment.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Service characteristic is :Correct Answer It is intangible
Your Answer It is intangible
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer External failure cost
Your Answer External failure cost
Select The Blank
Question Working together for excellence is ________.
Correct Answer Team work
Your Answer Team work
TQM & HR
Multiple Choice Multiple Answer
Question Corrective action means :Correct Answer Action taken on detecting NC , Action taken on observed NC
Your Answer Action taken on detecting NC , Action taken on observed NC
Multiple Choice Single Answer
Question The management review is carried :Correct Answer To ensure effectiveness Of QMS
Your Answer To ensure effectiveness Of QMS
Uma Ganesan--Assgn 1
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Single Answer
Question Incoming material inspection is :Correct Answer Appraisal cost
Your Answer Appraisal cost
True/False
Question Significant aspect means Perceived Risk.
Correct Answer True
Your Answer True
Select The Blank
Question In ISO the focus on customer is ________
Correct Answer In Enhancing customer satisfaction
Your Answer In Enhancing customer satisfaction
Multiple Choice Single Answer
Question ISO emphasis on :Correct Answer Prevention
Your Answer Prevention
Select The Blank
Question Quality approach is________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
Multiple Choice Multiple Answer
Question What are critical HR issue ?
Correct Answer Recruitment & Selection , Training & development , Appraisal
Your Answer Recruitment & Selection , Training & development , Appraisal
Select The Blank
Question Documents in company are controlled by ________.
Correct Answer Management Representative
Your Answer Management Representative
Select The Blank
Question ________ is calibration activity in company.
Correct Answer Appraisal cost
Your Answer Appraisal cost
Match The Following
TQM & HR
Question Correct Answer Your Answer
The difference ppk & cpk Method of calculating Std. Deviation Method of calculating
Std. Deviation
Process capability is Device to find out Whether process follows natural variation or
not Whether process follows natural variation or not
PPK is device when To establish initial process specification To establish initial process
specification
Capability of any process To predict the behavior of processes To predict the behavior
of processes
True/False
Question Enviroment indudes natural resources.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
Your Answer Control
Multiple Choice Single Answer
Question Service characteristic of perish ability means :Correct Answer Service can not store
Your Answer Service can not store
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Your Answer Continual improvement , Prevention of defect
Multiple Choice Single Answer
Question Who is responsible for quality objective?
Correct Answer Top management
Your Answer Top management
Multiple Choice Multiple Answer
Question In inspection primary concern is :Correct Answer Detection of Defect , Action on only detected defect
Your Answer Detection of Defect , Action on only detected defect
Multiple Choice Multiple Answer
Question In ISO the focus is on :Correct Answer Enhancing customer satisfaction , Delighting customer
Your Answer Enhancing customer satisfaction , Delighting customer
Multiple Choice Single Answer
Question In quality Assurance primary concern is:Correct Answer Co-ordination
Your Answer Co-ordination
Select The Blank
Question Response is________.
Correct Answer Speed
TQM & HR
Your Answer Speed
True/False
Question Gap 5 is Gap between expectation & perceived service.
Correct Answer True
Your Answer True
Select The Blank
Question Quality means________.
Correct Answer Fitness for use
Your Answer Meeting of excellence
Multiple Choice Single Answer
Question Evolution of quality concept. Current era is
Correct Answer Continual Improvement
Your Answer Continual Improvement
Multiple Choice Single Answer
Question Strategic quality management means :Correct Answer Strategic Improvement
Your Answer Strategic Improvement
Multiple Choice Multiple Answer
Question The ISO is based on :Correct Answer Plan - Do - check - Act , Continual improvement
Your Answer Plan - Do - check - Act , Continual improvement
Select The Blank
Question The quality approach is ________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
True/False
Question Quality approach is potential failure prevention.
Correct Answer True
Your Answer True
Select The Blank
Question The management review to be conducted ________.
Correct Answer At predetermined interval
Your Answer At predetermined interval
True/False
Question The quality manual have one Level.
Correct Answer False
Your Answer False
Select The Blank
Question Model used in software industry to check the quality is called________
Correct Answer Capability maturity model
Your Answer Capability maturity model
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Your Answer Detection of Defect
Multiple Choice Single Answer
TQM & HR
Question In TQM - M stands for :Correct Answer Management
Your Answer Management
Multiple Choice Multiple Answer
Question When cpk is less than one, :Correct Answer Process is volatile , Process is not capable
Your Answer Process is not capable , Process is volatile
Select The Blank
Question The objective of ISO-9000________
Correct Answer Customer satisfaction
Your Answer Customer satisfaction
True/False
Question Training helps organization Reduces employee' turnover.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Your Answer At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question Continual improvement is in :Correct Answer Enviromental objective , Audit Result , Corrective action
Your Answer Enviromental objective , Audit Result , Corrective action
Multiple Choice Multiple Answer
Question Reliability of product means :Correct Answer Consistency of performance , Performance over period
Your Answer Consistency of performance , Performance over period
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
Your Answer Management Representative.
Multiple Choice Single Answer
Question Which is not part of cost of poor quality ?
Correct Answer Appraisal cost
Your Answer Manufacturing cost
Match The Following
Question Correct Answer Your Answer
Quality approach is Potential failure prevention Potential failure prevention
TQM approach is Employee participation Employee participation
TQM & ISO both focuses on Customer satisfaction Customer satisfaction
Which tool is used in implementing ISO-9000 P - D - C - A P - D - C - A
True/False
Question Physical facilities is tangible dimension.
TQM & HR
Correct Answer True
Your Answer True
True/False
Question Product quality planning should address capability & qualification of
equipment.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Service characteristic is :Correct Answer It is intangible
Your Answer It is intangible
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer External failure cost
Your Answer External failure cost
Select The Blank
Question Working together for excellence is ________.
Correct Answer Team work
Your Answer Team work
Multiple Choice Multiple Answer
Question Corrective action means :Correct Answer Action taken on detecting NC , Action taken on observed NC
Your Answer Action taken on detecting NC , Action taken on observed NC
Multiple Choice Single Answer
Question The management review is carried :Correct Answer To ensure effectiveness Of QMS
Your Answer To ensure effectiveness Of QMS
*****************
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Multiple Answer
Question Control chart is :Correct Answer
Process control tool , Process monitoring tool
Your Answer
Process monitoring tool , Process control tool
True/False
Question The main business process objective is to serve the customer in excellent
manner.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
TQM & HR
Question The quality manual have :Correct Answer
Level 3
Your Answer
Level 3
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer
External failure cost
Your Answer
External failure cost
Select The Blank
Question The non conforming products are ________.
Correct Answer
Identified & controlled
Your Answer
Identified & controlled
Multiple Choice Single Answer
Question Who is responsible for quality objective?
Correct Answer
Top management
Your Answer
Top management
Multiple Choice Single Answer
Question Which is not Business objectivity?
Correct Answer
Supplier satisfaction
Your Answer
Supplier satisfaction
Multiple Choice Multiple Answer
Question Competitive advantage will be achieved by :Correct Answer
Serving customer in excellent fashion , Get in pat from customer &
convert in service , Technological improvement
Your Answer
Serving customer in excellent fashion , Get in pat from customer &
convert in service , Technological improvement
Multiple Choice Single Answer
Question Strategic quality management means :Correct Answer
Strategic Improvement
Your Answer
Detection of Defect.
Multiple Choice Single Answer
Question ISO 9000 & TQM are :Correct Answer
Supportive to each other
Your Answer
Supportive to each other
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer
Control
Your Answer
Control
Match The Following
Question
Correct Answer
Your Answer
To predict the
Method of calculating
Process capability is Device to find out Whether process follows natural variation or
not
Whether process follows natural variation or not
TQM & HR
PPK is device when To establish initial process specification
process specification
To establish initial
TQM & HR
Your Answer
Continual Improvement
Your Answer
How TQM helps in reducing cost By reducing external sale By reducing external sale
Calibration activity carried in company is
Quality planning is Prevention cost
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
Appraisal cost
Appraisal cost
TQM & HR
Multiple Choice Single Answer
Question Control chart shows :Correct Answer
Performance of process
Your Answer
Performance of process
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer
Detection of Defect
Your Answer
Detection of Defect
True/False
Question Quality circle encourages Employee Participation.
Correct Answer
True
Your Answer
True
Multiple Choice Multiple Answer
Question Continual improvement is in :Correct Answer
Enviromental objective , Audit Result , Corrective action
Your Answer
Enviromental objective , Audit Result , Corrective action
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
Your Answer
Qualified personnel , Leading team of auditor
Select The Blank
Question The quality approach is ________
Correct Answer
Potential failure prevention
Your Answer
Potential failure prevention
True/False
Question ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer
True
Your Answer
True
True/False
Question Failure mode & effect Analysis is prevention tool.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question TQM focuses on :Correct Answer
Customer
Your Answer
Customer
True/False
Question Lead assessor is Qualified personnel.
Correct Answer
True
Your Answer
True
True/False
Question ISO calls for Product approach.
Correct Answer
False
Your Answer
False
True/False
Question
TQM & HR
Correct Answer
Your Answer
True
True
Your Answer
To predict the
Process capability is Device to find out Whether process follows natural variation or
not
Process is not capable
PPK is device when To establish initial process specification
follows natural variation or not
Whether process
To establish initial
True/False
Question Quality is fitness for Purpose
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question Record may be :Correct Answer
Procedure to control its use.
Your Answer
An evidence to conformity
Multiple Choice Single Answer
Question ISO is known for :Correct Answer
Quality management
Your Answer
Quality management
TQM & HR
Select The Blank
Question The non conforming products are ________.
Correct Answer
Identified & controlled
Your Answer
Identified & controlled
Multiple Choice Multiple Answer
Question The inviromental policy must contain & communicate the :Correct Answer
Mission & value with respect to enviroment , Control & improve
enviroment , Enviromental impact
Your Answer
Mission & value with respect to enviroment , Control & improve
enviroment , Enviromental impact
True/False
Question Continual improvement which focusses on the improvement of of the
EMS, must be reviewed every monthefor any changed aspects and impacts.
Correct Answer
False
Your Answer
True
True/False
Question Gap 5 is Gap between expectation & perceived service.
Correct Answer
True
Your Answer
True
Select The Blank
Question ________organisations are not eligible for MBNQA.
Correct Answer
Software
Your Answer
Software
Select The Blank
Question ________ is a strategic effort, directed at attaining business objective,
through preventive action.
Correct Answer
Quality
Your Answer
Quality
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer
True
Your Answer
True
Multiple Choice Multiple Answer
Question Common elements of winners are :Correct Answer
Senior management was actively involved , Control of overall
process , Focus on customer
Your Answer
Senior management was actively involved , Control of overall
process , Focus on customer
True/False
Question Quality approach is potential failure prevention.
Correct Answer
True
Your Answer
True
Multiple Choice Multiple Answer
Question The mean is :Correct Answer
Center of process , Target of process
Your Answer
Center of process , Target of process
Multiple Choice Single Answer
Question Integrity means :-
TQM & HR
Correct Answer
Your Answer
TQM & HR
Question Zero Deviation means product is set on mean.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question Which revision of ISO is currently in use?
Correct Answer
ISO - 9000 -2000
Your Answer
ISO - 9000 -2000
Multiple Choice Single Answer
Question Which type of organization is not eligible for MBNQA?
Correct Answer
Manufacturing
Your Answer
Software
Multiple Choice Multiple Answer
Question In parato Analysis, we have to focus on problem which contribute :Correct Answer
80 % Of total problem , 80 % Of causes.
Your Answer
80 % Of total problem , 20 % Of total problem
Multiple Choice Single Answer
Question Service characteristic of perish ability means :Correct Answer
Service can not store
Your Answer
It have limited shelf life
Select The Blank
Question ________ brings cultural change.
Correct Answer
Small improvement
Your Answer
Continuous improvement
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer
Frequency Distribution tool , Data analysis tool
Your Answer
Prevention tool , Process control tool
True/False
Question Periodic review of process to be taken to ensure consistency of process.
Correct Answer
True
Your Answer
True
Select The Blank
Question Quality approach is________
Correct Answer
Potential failure prevention
Your Answer
Potential failure prevention
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer
Training & development
Your Answer
Training & development
Multiple Choice Multiple Answer
Question Failure Mode & Effect analysis is used as :Correct Answer
Prevention tool , Analysis tool
Your Answer
Correction tool , Inspection tool
Multiple Choice Single Answer
Question Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer
Total quality management
Your Answer
Total quality management
TQM & HR
Multiple Choice Single Answer
Question In ISO - 90001Quality policy declare by management. Similarly what is
specified in ISO - 14001?
Correct Answer
Enviromrntal Policy
Your Answer
Enviromrntal Policy
Multiple Choice Single Answer
Question Tally chart is :Correct Answer
Data collection tool
Your Answer
Data analysis tool
Multiple Choice Multiple Answer
Question Factor in GAP 1 is :Correct Answer
In sufficient market research , Luck of interaction between
management & customer , Luck of communication
Your Answer
In sufficient market research , Luck of interaction between
management & customer , Gap between expectation & Perception
Multiple Choice Single Answer
Question TQM approach is:Correct Answer
Centered on quality
Your Answer
Centered on quality
True/False
Question In TQM "Total" means Total Organization.
Correct Answer
True
Your Answer
True
Match The Following
Question
Correct Answer
TQM promotes
Kaizen is
Your Answer
Employee participation
Small change
Small change
Employee participation
Employee
Employee
TQM & HR
Total Quality Management & HR assgn :02: Grace
Multiple Choice Multiple Answer
Question By Applying basic principle the process improvement will be in
organization's :Correct Answer
Focus on work process , Maintain self esteem of other
Your Answer
Focus on work process , Good Decision making
True/False
Question When process improvements are institutionlized, the process is optimized
level
Correct Answer
False
Your Answer
True
Match The Following
Question
Correct Answer
Your Answer
How TQM helps in reducing cost By reducing external sale By reducing external sale
Calibration activity carried in company is
Quality planning is Prevention cost
Vender assessment is
Appraisal cost
Appraisal cost
Prevention cost
Appraisal cost
Appraisal cost
True/False
Question The performance of process is in controlled condition then it is called
process at managed level.
Correct Answer
False
Your Answer
True
Multiple Choice Multiple Answer
Question PP & PPK is calculated for :Correct Answer
Initial production run , Initial process setting
Your Answer
Initial process setting , Future process
Multiple Choice Single Answer
Question ISO 14001 is the management representative, responsible for :Correct Answer
Planning and implementing policy
Your Answer
Planning and implementing policy
Multiple Choice Multiple Answer
Question Which are pillar of Tqm :Correct Answer
Morale , Delivery
Your Answer
Morale , Training , Development
Select The Blank
Question In ISO the focus on customer is ________
Correct Answer
In Enhancing customer satisfaction
Your Answer
In Enhancing customer satisfaction
Multiple Choice Single Answer
Question Enviromental impact is :Correct Answer
Any change to envioment resulting from organization activity
Your Answer
Any change to envioment resulting from organization activity
Multiple Choice Multiple Answer
Question Dimensions of quality are :-
TQM & HR
Correct Answer
Your Answer
TQM & HR
Select The Blank
Question Quality approach is________
Correct Answer
Potential failure prevention
Your Answer
Potential failure prevention
Select The Blank
Question While setting Quality objective, ________ to be considered.
Correct Answer
Customer need
Your Answer
Customer need
Multiple Choice Multiple Answer
Question The benefits of Quality circle can be experienced by :Correct Answer
Employees , Organization
Your Answer
Employees , Organization , Management
Match The Following
Question
Correct Answer
Your Answer
Capability maturity
Process is controlled
True/False
Question The soft side of TQM include Training on job
Correct Answer
True
Your Answer
True
Multiple Choice Multiple Answer
Question The role of management in QMS is :Correct Answer
To provide resources , To provide support
Your Answer
To provide resources , To provide guidance , To provide Direction
Multiple Choice Single Answer
Question TQM is aiming :Correct Answer
Long term success
Your Answer
Long term success
Multiple Choice Multiple Answer
Question Measuring instrument should be :Correct Answer
Calibrated , Adjested & Re-Adjested , Properly located
Your Answer
Calibrated , Adjested & Re-Adjested , Properly located
Multiple Choice Single Answer
Question Dr. Deming worked in which country ?
Correct Answer
Japan
Your Answer
Japan
True/False
Question Physical facilities is tangible dimension.
Correct Answer
True
Your Answer
True
TQM & HR
True/False
Question Each Environmental objective must be traceable back to the
Environmental Policy statement.
Correct Answer
True
Your Answer
True
True/False
Question ISO - 9000 -2000 this revision of ISO is currently in use.
Correct Answer
True
Your Answer
True
True/False
Question ISO 9000 & TQM are supportive to each other.
Correct Answer
True
Your Answer
True
Multiple Choice Multiple Answer
Question The ISO is based on :Correct Answer
Plan - Do - check - Act , Continual improvement
Your Answer
Plan - Do - check - Act , Continual improvement
Multiple Choice Single Answer
Question The management review to be conducted :Correct Answer
As & when required
Your Answer
At predetermined interval
Select The Blank
Question TQM emphasises on ________.
Correct Answer
Small improvement
Your Answer
Continuous improvement
Multiple Choice Single Answer
Question All employee in organization must :Correct Answer
Understand & recognize commitment
Your Answer
Understand & recognize commitment
Multiple Choice Single Answer
Question In ISO the focus is on :Correct Answer
Enhancing customer satisfaction
Your Answer
Enhancing customer satisfaction
True/False
Question Poor service is due to Poor people.
Correct Answer
False
Your Answer
False
Select The Blank
Question Model used in software industry to check the quality is called________
Correct Answer
Capability maturity model
Your Answer
Capability maturity model
Select The Blank
Question Circle represent ________ while plotting flow chart.
Correct Answer
Beginning or end of operation
Your Answer
Beginning or end of operation
Select The Blank
Question The quality approach is ________
TQM & HR
Correct Answer
Your Answer
TQM & HR
Question The soft side of TQM include Training on job
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Cost of poor quality comprises :Correct Answer Cost of internal failure , Cost of external failure
Your Answer Cost of internal failure , Cost of external failure
Multiple Choice Single Answer
Question In TQM - M stands for :Correct Answer Management
Your Answer Management
True/False
Question The control of enviromental aspect Life side analysis.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Which is not pillar of TQM
Correct Answer Finance
Your Answer Productivity
Multiple Choice Multiple Answer
Question When cpk is less than one, :Correct Answer Process is not capable , Process is volatile
Your Answer Process is not capable
Multiple Choice Multiple Answer
Question If some activity are outsourced :Correct Answer Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Your Answer Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Multiple Choice Single Answer
Question CMM is applicable to :Correct Answer Software industry
Your Answer Software industry
True/False
Question Continual improvement which focusses on the improvement of of the EMS,
must be reviewed every monthefor any changed aspects and
impacts.
Correct Answer False
Your Answer False
Multiple Choice Multiple Answer
Question Process evaluation is to identify :Correct Answer Potential failure prevention , Correctness of product
Your Answer Potential failure prevention , Correctness of product , Verification of
product
True/False
Question TQM approach is based on Participation.
Correct Answer True
Your Answer True
TQM & HR
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Your Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question ISO 14001 is the management representative, responsible for :Correct Answer Planning and implementing policy
Your Answer Planning and implementing policy
True/False
Question The process mapping means sequence & interaction of process.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer Gap between expectation & perceived service
Your Answer Gap between expectation & perceived service
Match The Following
Question Correct Answer Your Answer
Dimension Physical facility Physical facility
Service characteristic Vary from time to time . Vary from time to time.
Customer satisfaction survey To assess customer satisfaction level To assess customer
satisfaction level
Poor service is due to Inadequate resource Inadequate resource
Multiple Choice Multiple Answer
Question Does TQM approach have relevance to Indian industry in context to
Correct Answer Customer satisfaction , People involvement
Your Answer Customer satisfaction , People involvement , Policy management
True/False
Question In TQM "Total" means Total Organization.
Correct Answer True
Your Answer True
Select The Blank
Question When the process is ________ then it is under control.
Correct Answer Within specification
Your Answer Within specification
Select The Blank
Question ISO - 9000- 1994 is ________
Correct Answer Model for quality Assurance
Your Answer Model for quality Assurance
Multiple Choice Single Answer
Question If TQM done properly :Correct Answer It brings significant organisational changes
Your Answer It brings significant organisational changes
Multiple Choice Multiple Answer
Question The inviromental policy must :-
TQM & HR
Correct Answer Comply with legislation , Commits to prevention of pollution , Be
Relevant to the activity
Your Answer Be Relevant to the activity , Comply with legislation ,Commits to
prevention of pollution
True/False
Question Bar chart shows how data is spread across the range.
Correct Answer True
Your Answer False
Select The Blank
Question ________ is the machine down time.
Correct Answer Waste
Your Answer Waste
Select The Blank
Question Response is________.
Correct Answer Speed
Your Answer Service
Select The Blank
Question Diamond represent ________ while plotting flow chart.
Correct Answer Decision point
Your Answer Decision point
Select The Blank
Question TQM emphasises on ________.
Correct Answer Small improvement
Your Answer Continuous improvement
Multiple Choice Single Answer
Question Range is :Correct Answer Difference of minimum & maximum
Your Answer Diff of highest & lowest
Multiple Choice Multiple Answer
Question What are main business process objective
Correct Answer Customer service , Profit & loss
Your Answer Customer service , New product , Profit & loss
Multiple Choice Single Answer
Question Which is not Business objectivity?
Correct Answer Supplier satisfaction
Your Answer Supplier satisfaction
Select The Blank
Question ________ is calibration activity in company.
Correct Answer Appraisal cost
Your Answer Appraisal cost
Match The Following
Question Correct Answer Your Answer
MBQA is eligible for Manufacturing organization Manufacturing organization
Malcolm baldring award seeks improvement in Quality & productivity Quality &
productivity
European quality award is for Improving efficiency Improving efficiency
TQM & HR
Common elements of winners are Senior management was activity involved Senior
management was activity involved
Multiple Choice Single Answer
Question Integrity means :Correct Answer True to our words
Your Answer True to our words
Multiple Choice Single Answer
Question Enviromental impact is :Correct Answer Any change to envioment resulting from organization activity
Your Answer Any change to envioment resulting from organization activity
Multiple Choice Single Answer
Question Quality planning is :Correct Answer Prevention cost
Your Answer Prevention cost
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer Training & development
Your Answer Training & development
Select The Blank
Question The supplier must provided ________ information to management.
Correct Answer Adequate
Your Answer Adequate
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer Qualified personnel , Leading team of auditor
Your Answer Qualified personnel , Leading team of auditor
tqm n hr
True/False
Question When process improvements are institutionlized, the process is optimized
level
Correct Answer False
Your Answer True
Select The Blank
Question Quality approach is________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Your Answer Continual improvement , Prevention of defect , Service
****************************************************
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
TQM & HR
Multiple Choice Multiple Answer
Question Bar chart is :Correct Answer Frequency Distribution tool , Data analysis tool
Your Answer Frequency Distribution tool , Data analysis tool
Multiple Choice Multiple Answer
Question The benefite of ISO 14001 are applicable to :Correct Answer The organisation which adopts it , Adjacent property owner &
enviroment
Your Answer The organisation which adopts it , Adjacent property owner &
enviroment
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer External failure cost
Your Answer External failure cost
Select The Blank
Question The evaluation & selection of vendor ________.
Correct Answer Must have procedure for selection
Your Answer Must have record of document
Multiple Choice Multiple Answer
Question In parato Analysis, we have to focus on problem which contribute :Correct Answer 80 % Of total problem , 80 % Of causes.
Your Answer 80 % Of total problem , 80 % Of causes.
Multiple Choice Multiple Answer
Question Cost of poor quality comprises :Correct Answer Cost of internal failure , Cost of external failure
Your Answer Cost of internal failure , Cost of external failure
Multiple Choice Multiple Answer
Question While setting Goal ,following things to be consider.
Correct Answer Marketability of product , Organization need
Your Answer Customer need , Marketability of product
Multiple Choice Single Answer
Question Malcolm Baldrige national quality award is for ( MBNQA ) :Correct Answer Total quality management
Your Answer Total quality management
True/False
Question Objective of finding cost of quality is to analyze it, reduce it.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Following are the phases of intervention:Correct Answer Formulation stage , Maintenance stage , Implementation stage
Your Answer Formulation stage , Maintenance stage , Implementation stage
Multiple Choice Single Answer
Question The documents of external origin :Correct Answer Should be controlled separately
Your Answer Should be controlled separately
TQM & HR
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer Qualified personnel , Leading team of auditor
Your Answer Qualified personnel , Leading team of auditor
Select The Blank
Question While calculating CPK standard deviation is________.
Correct Answer Estimated
Your Answer Estimated
Select The Blank
Question TQM promotes________
Correct Answer Team work
Your Answer Team work
True/False
Question Value is for which customer is paying.
Correct Answer True
Your Answer True
Select The Blank
Question While setting Quality objective, ________ to be considered.
Correct Answer Customer need
Your Answer Customer need
True/False
Question CPK is 1' 33 means four sigma process.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question By adopting TQM philosophy, it benefits to :Correct Answer Organisation & employee
Your Answer Organisation & employee
Multiple Choice Single Answer
Question The process mapping means :Correct Answer The sequence of operation & interaction of process
Your Answer The sequence of operation & interaction of process
True/False
Question Recruitment & Selection are critical HR issue.
Correct Answer True
Your Answer True
Select The Blank
Question ________ helps organization reduce employee turnover and absenteeism.
Correct Answer Training & development
Your Answer Training & development
Multiple Choice Multiple Answer
Question Internal audits to be conducted to check the :Correct Answer Conformance to ISO - 14001 , Conformance of system for
effectiveness , Stuatutory Requirement
Your Answer Conformance of system for effectiveness , Management review
Match The Following
Question Correct Answer Your Answer
TQM & HR
Process is managed level Performance is model respectable Process is controlled
Critical process maturity concept include Process capability Process capability
Managed level of process Process is controlled Performance is model respectable
CMM is Capability maturity Capability maturity
Multiple Choice Single Answer
Question Mission conveys the massage about what & who is :Correct Answer Company
Your Answer Company
Select The Blank
Question Quality means________.
Correct Answer Fitness for use
Your Answer Fitness for use
Select The Blank
Question ________ is important in providing some underpinning of the sense of
shared responsibility.
Correct Answer Single status
Your Answer Training & development
Select The Blank
Question The planning & implementing Enviromental policy is responsibility
of________
Correct Answer Management representative.
Your Answer Management representative.
Select The Blank
Question While calculating PPK standard deviation is________.
Correct Answer Calculated
Your Answer Calculated
Select The Blank
Question Arrow indicates ________.
Correct Answer Direction of flow
Your Answer Direction of flow
True/False
Question Leadership from top should be totally honest & transparent in dealing .
Correct Answer True
Your Answer True
True/False
Question Lead assessor is Qualified personnel.
Correct Answer True
Your Answer True
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer Continual improvement , Prevention of defect
Your Answer Continual improvement , Prevention of defect
True/False
TQM & HR
Question ISO is Quality management system.
Correct Answer True
Your Answer True
True/False
Question Quality is fitness for Purpose
Correct Answer True
Your Answer True
True/False
Question By Applying basic principle, the process improvement will be in
organization's focuses on work process.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question TQM culture is :Correct Answer Continuous improvement
Your Answer Long term improvement
Match The Following
Question Correct Answer Your Answer
The quality manual have Level 3 Level 3
The process mapping The sequence of operation & interaction of process The
sequence of operation & interaction of process
The role of management in QMS To provide resources To provide resources
Activities outsourced Vendors are assessed based on predetermined criteria Vendors
are assessed based on predetermined criteria
Multiple Choice Single Answer
Question Dr. Deming worked in which country ?
Correct Answer Japan
Your Answer Japan
Multiple Choice Single Answer
Question Analysis is :Correct Answer Process monitoring tool
Your Answer Process monitoring tool
True/False
Question Enviroment indudes natural resources.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Documents in company are controlled by :Correct Answer Management Representative.
Your Answer Management Representative.
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer Gap between expectation & perceived service
Your Answer Gap between expectation & perceived service
TQM & HR
Multiple Choice Multiple Answer
Question The management review to be conducted :Correct Answer At predetermined Interval , As & when required
Your Answer At predetermined Interval , As & when required
Multiple Choice Multiple Answer
Question The role of management is :Correct Answer To provide Resources , To define EMS , To monitor the effectiveness
of the system
Your Answer To provide Resources , To monitor the effectiveness of the system , To
provide mission
Multiple Choice Single Answer
Question The operational control in EMS is :Correct Answer The process of controlling environment
Your Answer The process of controlling environmental system
Select The Blank
Question Planning of internal hazardous material & its disposal________.
Correct Answer Contains Planing aspect
Your Answer Contains Planing aspect
Multiple Choice Multiple Answer
Question The company collect document to :Correct Answer Demonstrate effectiveness of system , Requirement of QMS
Your Answer Demonstrate effectiveness of system , To analyses , To preserve it
***************************************
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Select The Blank
Question Payment Against warranty is________.
Correct Answer External failure cost
Your Answer External failure cost
Select The Blank
Question Model used in software industry to check the quality is called________
Correct Answer Capability maturity model
Your Answer Capability maturity model
True/False
Question Bar chart shows how data is spread across the range.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question Dr. Deming's contribution is in the field of :Correct Answer Quality
Your Answer Quality
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer Control
Your Answer Detection of Defect.
TQM & HR
True/False
Question The European award uses the criteria of efficiency & effectiveness.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question CMM is applicable to :Correct Answer Software industry
Your Answer Software industry
Multiple Choice Multiple Answer
Question The competence of the employee means :Correct Answer Competence of personnel performing work affective quality ,
Evaluale the effectiveness of action taken , Maintain appropriate Record
Your Answer Competence of personnel performing work affective quality , Evaluale
the effectiveness of action taken , Maintain appropriate Record
Multiple Choice Single Answer
Question Process capability is :Correct Answer Long term performance of process
Your Answer Long term performance of process
Select The Blank
Question Any process is to be ________.
Correct Answer Controllable
Your Answer Monitored
Select The Blank
Question The quality approach is ________
Correct Answer Potential failure prevention
Your Answer Potential failure prevention
Multiple Choice Single Answer
Question All employee in organization must :Correct Answer Understand & recognize commitment
Your Answer Understand & recognize commitment
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer Detection of Defect
Your Answer Detection of Defect
Select The Blank
Question The enviromental management system followed by organisation is
________.
Correct Answer IS0-14001
Your Answer IS0-9000
Select The Blank
Question In ISO the focus on customer is ________
Correct Answer In Enhancing customer satisfaction
Your Answer In Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question Process evaluation is to identify :Correct Answer Potential failure prevention , Correctness of product
Your Answer Potential failure prevention , Correctness of product , Verification of
product
TQM & HR
True/False
Question Each Environmental objective must be traceable back to the
Environmental Policy statement.
Correct Answer True
Your Answer True
Match The Following
Question Correct Answer Your Answer
Circle symbol Binging or end of operation Binging or end of operation
Pareto analysis is Data analysis told Data analysis told
X bar means Average of reading Average of reading
LCT means Lower control limit Lower control limit
Multiple Choice Single Answer
Question In ISO the focus is on :Correct Answer Enhancing customer satisfaction
Your Answer Enhancing customer satisfaction
Multiple Choice Multiple Answer
Question Leadership style from top to bottom is :Correct Answer Totally honest & transparent , Providing consistent vision / direction
Your Answer Totally honest & transparent , Providing consistent vision / direction
True/False
Question Continious improvement is improvement of inviromental system.
Correct Answer True
Your Answer True
Select The Blank
Question Knowing capability of any process is required to ________.
Correct Answer Predict the behavior of process
Your Answer Draw control chart
Select The Blank
Question ________ is responsible for quality objective.
Correct Answer Top management
Your Answer Quality Assurance
Multiple Choice Single Answer
Question The management review is carried :Correct Answer To ensure effectiveness Of QMS
Your Answer To ensure effectiveness Of QMS
True/False
Question ISO calls for Product approach.
Correct Answer False
Your Answer True
Select The Blank
Question The base of Tqm is________
Correct Answer Employee involvement
Your Answer Employee involvement
TQM & HR
Multiple Choice Multiple Answer
Question The benefits of Quality circle can be experienced by :Correct Answer Employees , Organization
Your Answer Employees , Organization , Management
Multiple Choice Multiple Answer
Question How TQM helps in reducing cost?
Correct Answer By reducing external failure cost , By reducing internal failure
Your Answer By reducing external failure cost , By reducing internal failure , By
avoiding inspection
Multiple Choice Multiple Answer
Question Which of the following are depicted as the levels of the TQM?
Correct Answer Management style , Culture
Your Answer Culture , Management style , Devlopment , Policy management
Multiple Choice Single Answer
Question Which type of organization is not eligible for MBNQA?
Correct Answer Manufacturing
Your Answer Software
True/False
Question ISO - 9000- 1994 is Model for quality Assurance.
Correct Answer True
Your Answer True
Match The Following
Question Correct Answer Your Answer
Tally chart is Data analysis told Data collection tool
True/False
Question Prevention of pollution is prevention of cause of pollution.
Correct Answer True
Your Answer True
Multiple Choice Single Answer
Question CPK indicate :Correct Answer Process capability of two side process with centre
Your Answer Process capability of two side process with centre
Multiple Choice Single Answer
Question The need for TQM is due to :Correct Answer Cut throat competition
Your Answer Improving profit
True/False
Question In TQM - M stands for Money.
Correct Answer False
Your Answer False
True/False
Question Cause & effect diagram shows relation between causes & its effect.
Correct Answer True
Your Answer True
TQM & HR
Multiple Choice Multiple Answer
Question Common features of CMM is how to produce software product which are :Correct Answer Consistence , Repeatable , Predictable
Your Answer Consistence , Predictable , User friendly
Multiple Choice Multiple Answer
Question Factor in GAP 1 is :Correct Answer In sufficient market research , Luck of interaction between
management & customer , Luck of communication
Your Answer Luck of interaction between management & customer , Luck of
communication
Select The Blank
Question ________ is one of the major business processes.
Correct Answer Customer servive & supply chain
Your Answer Staff involvement
Multiple Choice Multiple Answer
Question The records shall be maintained to provide :Correct Answer Evidence of conformity to requirement , Demonstrate effectiveness
of system
Your Answer Evidence of conformity to requirement , Demonstrate effectiveness of
system , Easy understanding
Multiple Choice Single Answer
Question ISO 9000 & TQM are :Correct Answer Supportive to each other
Your Answer Supportive to each other
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer Before supply of product , Before commitment of supply of product
Your Answer Before supply of product , Before commitment of supply of product
Multiple Choice Single Answer
Question In quality Assurance primary concern is:Correct Answer Co-ordination
Your Answer Detection of Defect.
Multiple Choice Multiple Answer
Question Failure Mode & Effect analysis is used as :Correct Answer Prevention tool , Analysis tool
Your Answer Prevention tool , Analysis tool , Correction tool
Select The Blank
Question Response is________.
Correct Answer Speed
Your Answer Time taken
Multiple Choice Single Answer
Question Creativity means :Correct Answer Unlimited thinking
Your Answer Unlimited thinking
***********************************************
TQM & HR
LIST OF ATTEMPTED QUESTIONS AND ANSWERS
Multiple Choice Multiple Answer
Question Does TQM approach have relevance to Indian industry in context to
Correct Answer
Customer satisfaction , People involvement
Your Answer
Customer satisfaction , People involvement
True/False
Question Continual improvement which focusses on the improvement of of the
EMS, must be reviewed every monthefor any changed aspects and impacts.
Correct Answer
False
Your Answer
True
True/False
Question The main business process objective is to serve the customer in excellent
manner.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question Which is not part of cost of poor quality ?
Correct Answer
Appraisal cost
Your Answer
Appraisal cost
True/False
Question Business objectives are derived from mission statement.
Correct Answer
True
Your Answer
False
Multiple Choice Multiple Answer
Question Control chart is :Correct Answer
Process monitoring tool , Process control tool
Your Answer
Process monitoring tool , Process control tool
Multiple Choice Multiple Answer
Question Cost of poor quality comprises :Correct Answer
Cost of internal failure , Cost of external failure
Your Answer
Cost of internal failure , Cost of external failure
Select The Blank
Question TQM promotes________
Correct Answer
Team work
Your Answer
Team work
Select The Blank
Question The objective of ISO-9000________
Correct Answer
Customer satisfaction
Your Answer
Customer satisfaction
Multiple Choice Multiple Answer
Question Failure Mode & Effect analysis is used as :Correct Answer
Prevention tool , Analysis tool
Your Answer
Prevention tool , Correction tool
Multiple Choice Multiple Answer
Question Corrective action means :Correct Answer
Action taken on detecting NC , Action taken on observed NC
Your Answer
Action taken on detecting NC , Action taken on observed NC
TQM & HR
Select The Blank
Question Rectangle represent ________ While plotting flow chart.
Correct Answer
Steps in Activity
Your Answer
Steps in Activity
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer
Before supply of product , Before commitment of supply of product
Your Answer
Before supply of product , After supply of product
Select The Blank
Question ________ brings cultural change.
Correct Answer
Small improvement
Your Answer
Small improvement
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer
Detection of Defect
Your Answer
Detection of Defect
Multiple Choice Multiple Answer
Question Common features of CMM is how to produce software product which are :Correct Answer
Consistence , Repeatable , Predictable
Your Answer
Consistence , Repeatable , Predictable
Multiple Choice Single Answer
Question According to traditional thinking, quality improvement leads to :Correct Answer
Lower productivity
Your Answer
Lower productivity
Multiple Choice Single Answer
Question What is quality policy?
Correct Answer
Overall intention & direction of organization towards quality
Your Answer
Overall intention & direction of organization towards quality
Select The Blank
Question Circle represent ________ while plotting flow chart.
Correct Answer
Beginning or end of operation
Your Answer
Beginning or end of operation
True/False
Question TQM approach centered on quality.
Correct Answer
True
Your Answer
True
Match The Following
Question
Correct Answer
Your Answer
Circle symbol
Pareto analysis is
TQM & HR
Multiple Choice Single Answer
Question Evolution of quality concept. Current era is
Correct Answer
Continual Improvement
Your Answer
Continual Improvement
Multiple Choice Multiple Answer
Question Reliability of product means :Correct Answer
Consistency of performance , Performance over period
Your Answer
Performance over period , Post performance
True/False
Question The soft side of TQM include Training on job
Correct Answer
True
Your Answer
True
Select The Blank
Question ________organisations are not eligible for MBNQA.
Correct Answer
Software
Your Answer
Software
Multiple Choice Single Answer
Question In statistical quality control, primary concern is :Correct Answer
Control
Your Answer
Control
Multiple Choice Single Answer
Question TQM focuses on :Correct Answer
Customer
Your Answer
Employee
Multiple Choice Single Answer
Question TQM approach is based on :Correct Answer
Participation
Your Answer
Participation
Multiple Choice Single Answer
Question In quality Assurance primary concern is:Correct Answer
Co-ordination
Your Answer
Co-ordination
Multiple Choice Multiple Answer
Question By adopting Tqm philosophy, it benefit to :Correct Answer
Organisation , Employee
Your Answer
Organisation , Employee
Multiple Choice Single Answer
Question The process evaluation is to identify :Correct Answer
Potential improvement in process
Your Answer
Potential improvement in process
Match The Following
Question
Correct Answer
Your Answer
TQM & HR
In ISO the focus on customer
implementation of QMS
Top management
Top management
TQM & HR
Multiple Choice Single Answer
Question The management review is carried :Correct Answer
To ensure effectiveness Of QMS
Your Answer
To ensure effectiveness Of QMS
True/False
Question Leadership from top should be totally honest & transparent in dealing .
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question Strategic quality management means :Correct Answer
Strategic Improvement
Your Answer
Strategic Improvement
True/False
Question Documents in company are controlled by Management Representatives.
Correct Answer
True
Your Answer
False
Multiple Choice Single Answer
Question In TQM "Total" refers to :Correct Answer
Total organisation
Your Answer
Total organisation
******************************************
Total Quality Management & HR assgn :01: Grace
True/False
Question The quality manual have one Level.
Correct Answer
False
Your Answer
False
Multiple Choice Single Answer
Question The management representative is responsible for :Correct Answer
Establishment & implementation of QMS
Your Answer
Establishment & implementation of QMS
Multiple Choice Single Answer
Question According to Deming, Quality problems are :Correct Answer
Due to management
Your Answer
Due to management
Multiple Choice Multiple Answer
Question What are main business process objective
Correct Answer
Customer service , Profit & loss
Your Answer
Customer service , Supplier chain , New product
Select The Blank
Question The TQM approach is based on employee's ________.
Correct Answer
Participation
Your Answer
Involvement
Multiple Choice Single Answer
Question The ISO is based on :Correct Answer
Plan - do - check- Act
Your Answer
Plan - do - check- Act
TQM & HR
Multiple Choice Multiple Answer
Question What are critical HR issue ?
Correct Answer
Recruitment & Selection , Training & development , Appraisal
Your Answer
Recruitment & Selection , Training & development , Appraisal
Multiple Choice Single Answer
Question Mission conveys the massage about what & who is :Correct Answer
Company
Your Answer
Company
Multiple Choice Multiple Answer
Question Continual improvement is in :Correct Answer
Enviromental objective , Audit Result , Corrective action
Your Answer
Enviromental objective , Corrective action , Sales
Multiple Choice Multiple Answer
Question If some activity are outsourced :Correct Answer
Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Your Answer
Vendors are assessed on predetermined criteria , Procedure to be
followed for assessing vendor
Multiple Choice Single Answer
Question Environment policy must contain :Correct Answer
Mission & core values with respect to the enviroment
Your Answer
Mission & core values with respect to the enviroment
True/False
Question Significant aspect means Perceived Risk.
Correct Answer
True
Your Answer
True
Select The Blank
Question ________ is responsible for quality objective.
Correct Answer
Top management
Your Answer
Top management
Multiple Choice Multiple Answer
Question The customer requirement to be reviewed :Correct Answer
Before supply of product , Before commitment of supply of product
Your Answer
Before supply of product , Before commitment of supply of
product , After Receiving pox.
Multiple Choice Multiple Answer
Question Lead assessor is :Correct Answer
Qualified personnel , Leading team of auditor
Your Answer
Qualified personnel , Leading team of auditor
Select The Blank
Question Payment Against warranty is________.
Correct Answer
External failure cost
Your Answer
External failure cost
Select The Blank
Question When the process is in mature stage, it means ________.
Correct Answer
Process is defined
Your Answer
Process is under control
TQM & HR
Multiple Choice Multiple Answer
Question In ISO the focus is on :Correct Answer
Enhancing customer satisfaction , Delighting customer
Your Answer
Enhancing customer satisfaction , Delighting customer , Satisfying
customer
Select The Blank
Question ________ is calibration activity in company.
Correct Answer
Appraisal cost
Your Answer
Manufacture cost
Multiple Choice Single Answer
Question What is part of cost of poor quality?
Correct Answer
External failure cost
Your Answer
External failure cost
Multiple Choice Multiple Answer
Question Leadership style from top to bottom is :Correct Answer
Totally honest & transparent , Providing consistent vision / direction
Your Answer
Providing consistent vision / direction , Only direction from top
Select The Blank
Question Diamond represent ________ while plotting flow chart.
Correct Answer
Decision point
Your Answer
Decision point
True/False
Question Failure mode & effect Analysis is prevention tool.
Correct Answer
True
Your Answer
True
Multiple Choice Single Answer
Question Gap 5 is :Correct Answer
Gap between expectation & perceived service
Your Answer
Gap between expectation & perceived service
Select The Blank
Question Arrow indicates ________.
Correct Answer
Direction of flow
Your Answer
Direction of flow
True/False
Question Quality policy is defined by employee of organisation
Correct Answer
False
Your Answer
False
True/False
Question The difference of USL & LSL is range.
Correct Answer
False
Your Answer
False
Multiple Choice Single Answer
Question In inspection primary concern is :Correct Answer
Detection of Defect
Your Answer
Detection of Defect
Select The Blank
TQM & HR
Question The primary responsibility of human Resource is ________
Correct Answer
To provide competent person
Your Answer
To provide competent person
Multiple Choice Multiple Answer
Question Current quality concept is :Correct Answer
Continual improvement , Prevention of defect
Your Answer
Continual improvement , Prevention of defect , Service
Match The Following
Question
Correct Answer
Your Answer
Circle symbol
Pareto analysis is
TQM & HR
Correct Answer
Your Answer
Calculated
Calculated
Your Answer
Dimension
Physical facility
Physical facility
Service characteristic
Inadequate resource
To assess