D31
D31
HORSEPOWER
70 HP 52 kW
OPERATING WEIGHT
14,640 - 15,850 lb
6655 - 7205 kg
D31-20
D31-20
D31E-20/D31P-20
WALK-AROUND
Operator Oriented Design for Easy Operation
Wrist-control type single-lever
(joystick) for blade control
reduces operating effort for
blade lift/dig, tilt and angle.
A HYDROSHIFT transmission
allows quick speed and
directional changes (F3/R3).
Efficient Turbocharged
S4D102E engine
provides powerful and
fuel-saving operation.
Simplified Maintenance
4 Spin-on filters, air cleaner with dust evacuator.
4 Easy-to-drain fuel tank minimizes maintenance.
4 Automatic fan belt tensioner and radiator coolant
reservoir facilitate simplified maintenance.
OPERATORS COMPARTMENT
Responsive Operation
Joysticks are the logical choice
for providing smooth, precise
control in order to gain maximum
productivity. Their operation
mirrors the natural motion of the
activity the operator wishes to
perform.
LH
RH
N
2
LH
RH
Float
Down
Angle
Tilt
Tilt
Up
D31E-20/D31P-20 SPECIFICATIONS
ENGINE
Model..........................................................Komatsu S4D102E-1
Type .................................4-cycle, water-cooled, direct injection
Aspiration ..............................................................Turbocharged
No. of cylinders ..........................................................................4
Bore .......................................................................4.02" 102 mm
Stroke ....................................................................4.72" 120 mm
Piston Displacement ..............................................240 in3 3.9 ltr.
Gross Horsepower* ........................75 HP 56 kW @ 2350 RPM
Flywheel Horsepower** ..................70 HP 52 kW @ 2350 RPM
Net Max. Torque ........................217 ft lb 294 Nm @ 1400 RPM
Governor ..................................................All-speed, mechanical
*Per SAE J1995 conditions.
**Engine equipped with air cleaner, alternator (not charging),
muffler and fan (SAE J1349).
DAMPER
Wet-type damper, with built-in torsion and friction springs,
absorbs engine torque vibrations as well as stress from external impacts.
HYDROSHIFT TRANSMISSION
The unique Komatsu HYDROSHIFT transmission with planetary gears is hydraulically-controlled and force-lubricated.
Efficient power flow and simplified direction and speed
changes (3 forward and 3 reverse).
D31E-20
Travel speed Forward
Rated drawbar pull
Reverse
1st
1.4 MPH
16,180 lb
1.5 MPH
2.2 km/h
7340 kg
2.4 km/h
2nd
2.4 MPH
8,710 lb
2.7 MPH
3.9 km/h
3950 kg
4.3 km/h
3rd
4.0 MPH
4,780 lb
4.4 MPH
6.5 km/h
2170 kg
7.1 km/h
Max. drawbar pull ..........................................19,910 lb 9030 kg
D31P-20
Travel speed Forward
Rated drawbar pull
Reverse
1st
1.4 MPH
16,070 lb
1.5 MPH
2.2 km/h
7290 kg
2.4 km/h
2nd
2.4 MPH
8,600 lb
2.7 MPH
3.9 km/h
3900 kg
4.3 km/h
3rd
4.0 MPH
4,630 lb
4.4 MPH
6.5 km/h
2100 kg
7.1 km/h
Max. drawbar pull ..........................................19,760 lb 8960 kg
UNDERCARRIAGE
Suspension ..................................................................Rigid type
Track roller frame .......................................High-tensile-strength
steel construction.
Rollers and idlers..................Lubricated idlers, track and carrier
rollers are sealed with floating seals.
Track shoes ...............................................Single-grouser shoes
Unique dust seals prevent entry of dust into pin-to-bushing
clearances for extended service. Track tension is easily adjusted with a grease gun.
No. of shoes
No. of track rollers
No. of carrier rollers
Track gauge
Grouser height
Shoe width (standard)
Ground contact area
Ground pressure
(fully equipped)
D31E-20
37
5
1
4'9" 1450 mm
1.9" 47 mm
13.0" 330 mm
1,923 in2
12410 cm2
7.5 PSI
0.53 kg/cm2
D31P-20
41
6
1
5'5" 1650 mm
1.9" 47 mm
23.6" 600 mm
4,064 in2
26220 cm2
3.9 PSI
0.27 kg/cm2
22 ltr.
115 ltr.
14 ltr.
1.5 ltr.
13 ltr.
47 ltr.
9.5 ltr.
12 ltr.
HYDRAULIC SYSTEM
STEERING
Single steering lever controls all direction movement. Wet, multiple-disc steering clutches are PPC controlled and interconnected with wet, contracting-band, steering brakes to allow easy,
light-touch steering/braking actions. A PPC valve built into the
steering circuit facilitates smooth, shockless steering control.
Inching pedal assures smooth, easy starting and stopping, precise inching approaches to obstacles and impact digging.
FINAL DRIVE
Spur gear, single-reduction final drives. Bolt-on type sprockets
for easy replacement.
DIMENSIONS
Unit: ft. in. mm
6'5" 1955
8'9" 2675
2'10" 865
1'2" 350
6'2" 1880
10'8" 3240
12'2" 3710
1'3" 370
4'9" 1450
7'11" 2415
8'10" 2695
4'4" 1310
4'1" 1250
3'0" 915
6'5" 1955
8'9" 2675
7'2" 2185
11'7" 3520
12'11" 3940
1'1" 320
1'5" 420
5'5" 1650
9'5" 2875
8'10" 2695
4'4" 1310
4'1" 1250
DOZER EQUIPMENT
Use of high-tensile-strength steel in moldboard for extended service life. Hydraulic hoses for blade angle and tilt are
protected with steel plates.
Power-angle-tiltdozer
D31E-20
D31P-20
Overall
length
with dozer
12'2"
3710 mm
12'11"
3940 mm
Blade Capacity
*LH
Blade
length x height
2.22 yd3
1.70 m3
2.34 yd3
1.79 m3
7'11" x 2'9"
2415 mm x 840 mm
9'5" x 2'7"
2875 mm x 790 mm
SAE
3
1.65 yd
1.26 m3
1.70 yd3
1.3 m3
Max. lift
above
ground
2'10"
865 mm
3'0"
915 mm
Max. drop
Max. tilt
below
adjustment
ground
1'3"
1'2"
370 mm
350 mm
1'1"
1'5"
320 mm
420 mm
Additional weight
Hydraulic
control unit
1,870 lb
400 lb
850 kg
180 kg
1,980 lb
400 lb
900 kg
180 kg
Blade
Additional
ground
pressure
1.13 PSI/
0.08 kg/cm2
0.57 PSI/
0.04 kg/cm2
(24V)
Power Train and Controls:
Sprockets, one piece
type
Mono-lever steering with
PPC
Transmission, F3R3
Undercarriage:
Idler with recoil spring
Track frames, 5 roller
(D31E-20),
6 roller (D31P-20)
Track roller guards, end
section
Track shoe assembly,
13" (330 mm) (D31E-20),
23.6" (600 mm)
(D31P-20), single grouser
shoes with sealed and
lubricated link assembly
blade
Vandalism Protection:
Filler cap locks and cover
locks
Other Standard
Equipment:
Marks and plates, English
*ROPS canopy or ROPS
cab must be ordered for all
machines.
*Dozer assembly and rear
mounted equipment are
not included.
OPTIONAL EQUIPMENT
Fire extinguisher
Front pull hook, for use
with under guard
Full length, segmented
track roller guards
Front sweeps
Power angle tilt dozer
Front, side & rear screens Instrument panel lock
cover
Heater-defroster for cab
Hitch
Radiator reservoir tank
Hydraulics for ripper
ROPS Cab*
Meets ISO 3471, SAE J1040a and SAE J395a standards.
Includes: floor mat, front & rear wipers, and electric fan.
Additional weight (to tractor) . . . . . . . . . . . . . . .1,030 lb 470 kg
Additional ground pressure
D31E 0.68 psi 0.048 kg/cm2
D31P 0.33 psi 0.023 kg/cm2
ROPS Canopy*
Meets ISO 3471, SAE J1040a and SAE J395a standards.
Additional weight (to tractor) . . . . . . . . . . . . . . . .505 lb 230 kg
Additional ground pressure
D31E 0.41 psi 0.029 kg/cm2
D31P 0.20 psi 0.014 kg/cm2
Optional Ripper
Type
Multi-Shank
No. of Shanks
3 (5 shanks attachable)
970 lb 440 kg
1'5" 440 mm
1'0" 310 mm
Beam length
5'0" 1529 mm
Additional length
2'7" 785 mm
*Note: ROPS Cab or ROPS Canopy must be ordered for all machines.
Optional shoes
Model
D31E-20
D31P-20
Type of shoe
15.8" 400 mm
single-grouser shoe
23.6" 600 mm
circular arc shoe
*Additional weight
+176 lb +80 kg
+33 lb +15 kg
2,331 in
15040 cm2
4,064 in2
26220 cm2
1.00 PSI
0.07 kg/cm2
*Additional height
1" 20 mm
*Addition to tractor.
SUPPORT
Count on Komatsu and your local distributor for the
support you deserve. Our success depends on satisfying your need for productive equipment and supporting that equipment. Thats why we have one
of the largest and strongest heavy-equipment
distributor organizations in North America. Their
personnel are not only trained to help you select
the equipment that is best-matched for your business but to support that equipment.
Parts Three computer-linked parts distribution centers provide fast access to anywhere in the U.S. and Canada. Most parts are
available overnight. Plus, Komatsu distributors keep a large assortment of commonly
used parts in stock for immediate access.
AESS442-00
Printed in USA
C-11/97(10M)
11/97 (EV-1)
www.KomatsuAmerica.com