Professional Documents
Culture Documents
Problems On Manometer & Barometer
Problems On Manometer & Barometer
isocr.blogspot.com
1. The water in a tank is pressurized by air, and the pressure is measured by a multi fluid
manometer as shown in Fig.. Determine the gage pressure of air in the tank if h1 = 0.2 m,
h2 =
0.3 m, and h3 = 0.46 m. Take the densities of water, oil, and mercury to be 1000
3. Consider a U-tube whose arms are open to the atmo- sphere. Now water is poured into
the U-tube from one arm, and light oil (= 790 kg/m 3) from the other. One arm contains
70-cm-high water, while the other arm contains both fluids with an oil-to-water height
ratio of 4. Determine the height of each fluid in that arm.
4. Freshwater and seawater flowing in parallel horizontal pipelines are connected to each
other by a double U-tube manometer, as shown in Fig. Determine the pressure difference
between the two pipelines. Take the density of sea- water at that location to be = 1035
kg/m3. Can the air column be ignored in the analysis?
5. The pressure in a natural gas pipeline is measured by the manometer shown in Fig with
one of the arms open to the atmosphere where the local atmospheric pressure is 14.2
measured
to
be
80
kPa.
7. Consider a double-fluid manometer attached to an air pipe shown in Fig.If the specific
gravity of one fluid is 13.55, determine the specific gravity of the other fluid for the
indicated absolute pressure of air. Take the atmospheric pressure to be 100 kPa.
8. Consider the system shown in Fig.If a change of 0.7 kPa in the pressure of air causes
the brinemercury interface in the right column to drop by 5 mm in the brine level in
the right column while the pressure in the brine pipe remains constant, determine the ratio
of A2/A1.
gravities
determine the height of a mercury column that would create the same pressure at A.