Professional Documents
Culture Documents
Coatings Bro PDF
Coatings Bro PDF
Performance
Coatings
Productivity, investment
protection and cost reduction
The total economic loss from metal corrosion can approach a staggering
5%. This huge loss comes from products that must be sold as a lower grade;
or must be repickled, reprocessed or scrapped due to corrosive attack
while in the plant. This leads to lost productivity. The high cost of corrosion
also includes rust claims and freight costs for returned goods.
Traditional coatings rely on sacrificial metals (zinc, chromates, aluminum) for inhibition. Due to the large particle
size of these inhibitors, gaps exist which allow corrosion to
start and eventually expand, causing coating failure.
Cortecs permanent coatings provide long-term VpCI and barrier corrosion protection.
permanent PRIMERS
Typically applied as a base coat prior to
topcoat. Enhances the long-term performance of the total corrosion control coating
system.
Water based
VpCI-373
Fast Drying Chromate Primer
Replacement
Conforms to MIL-P-15328D
Excellent intercoat adhesion
VpCI-374
Long Lasting Performance Primer
High solids
Works well with waterborne topcoats
Resists sagging
Effective in indoor and outdoor environments
VpCI-397
High Temperature Primer
Extremely hard (9H pencil hardness)
High temperature capabilities (1100F (593C))
MER resistant
CorrVerter
VpCI Rust Converter and Primer
Excellent for rusty or poorly prepared steel surfaces
Penetrates and eliminates rust
Stops further rusting
Can be used as a primer
Epoxy
VpCI-393
Tight-Sealing, Penetrating Film Primer
Excellent for use over pre-rusted steel
Also seals concrete or wood
2K system
VpCI-395
Fast Drying Water Based
Epoxy for Severe Conditions
Excellent adhesion on difficult-toadhere-to substrates
Outperforms comparable epoxies by 20%
High solids
VOC compliant
2K system
Urethane
VpCI-396
Our Most Durable Long Lasting
Coating Available
Moisture-cure
Single component package
Can be applied at low temperatures
Excellent chemical resistance
Extremely long-lasting
Permanent
TOPCOATS
Designed for long-term durability, Cortec
coatings are the second component of the
total corrosion control coating system.
Water based
VpCI-383
Immersion Coating
Permanent acrylic coating
Strong adhesion at thin mil thickness
Easily topcoated
Custom matched colors
Weldable
VpCI-385
Non-Skid Coating
Good adhesion
Formulated for floors, ramps, stairs
VpCI-386
Our Original Topcoat for Multiple Uses
Permanent acrylic coating
Available in standard and custom colors
Can be overcoated
Gloss finish
VpCI-387
A High Build Topcoat for Moderate Conditions
High build acrylic coating
Effective with or without a primer
UV resistance
Semigloss appearance
VpCI-386FR
Fire Retardant Topcoat
Passes ASTM-D-3806-79 Fire Retardant Paint Test
With VpCI-374 gives excellent salt spray protection
UV resistant
CorrShield Gold
True Gold Water-Based Coating
Permanent acrylic coating
Attractive gold appearance
Gloss finish
Epoxy
VpCI-365
Replacement for Coal Tar Epoxies
High flash point
Ideal for outdoor or wet environments
Medium to severe environment applications
2K system
TEMPORARY
COATINGS
Used over both painted and unpainted surfaces. Provides
protection during assembly, storage and shipment. Cortec
coatings are easily removed.
Solvent based
VpCI-367
Dry Film Temporary Coating
Excellent salt/humidity resistance
Removable with EcoLine Cleaner/Degreaser
Can be overcoated
VpCI-368
Our Best Temporary Coating
Outdoor coating
Firm, wax-like film
UV resistance
Conforms to MIL-C-16173E (Grade 1 & 2), QPL product
NSN 8030-00-62-6950
NATO 6850-66-132-5848
NATO 6850-55-132-6099
VpCI-369
Self-Healing Barrier Coating
Self-healing film
Excellent lubricity
Conforms to MIL-C-16173E (Grades 1, 2 & 4), QPL product
NSN 8030-00-244-1297
Water based
VpCI-372
Strippable, Peelable Coating
Dry film
Fast drying
Can be disposed of as solid waste when removed
Effective for masking operations
VpCI-384
Two Component Urethane Finish Coat
Very hard coating
Excellent solvent resistance
Excellent flexibility
High gloss when fully cured
Excellent adhesion to moisture cure
urethanes even when fully cured
VpCI-388
Removable Tack Free Coating
Excellent for long-term indoor
corrosion protection
Dries clear, firm
Environmentally friendly disposal
VpCI-389
Waxy Film Coating for Severe Conditions
Excellent for long-term outdoor applications
Excellent salt spray resistance
Stays slightly tacky
VpCI-390
Hard Film Temporary Coating
Excellent salt spray resistance
Drys hard, non-tacky
Easily removed
VpCI-391
Non-Tacky Water Based Coating
Excellent salt spray resistance
Drys hard, non-tacky
Easily removed
Custom colors available
CorrShield Strippable Coating
Excellent salt spray resistance
Dry film
Provides mechanical and corrosion protection
Custom colors available
CorrShield VpCI Transit Coating
for Shipping and Storage
Waxy film
Zero VOC
Easily removable
Dilutable
VOC
Dry Time
g/l (lb/gal)
Solids
%
Coverage
ft2/gal (m2/l)
Application
Method
0.5-1mil (12.5-25 m)
20 min.
151 (0.17)
33
1050 (26.2)
VpCI-374
Hard
2 mil (50 m)
20 min.
150 (1.25)
39
306 (7.5)
VpCI-397
Hard
2 hrs.
250 (2.04)
33
529 (13.1)
Spray, dip
VpCI-CorrVerter
Hard
2 hrs.
70 (0.56)
56
VpCI-393
Hard
0.5-1mil (12.5-25 m)
8 hrs.
100
1590 (38.8)
VpCI-395
Hard
2 mil (50 m)
10 min.
150 (1.25)
60
400 (9.7)
Spray
VpCI-396
Hard
2-4mil (50-110 m)
2 hrs.
330 (2.75)
70
561 (13.53)
VpCI-383
Hard
0.5-1mil (12.5-25 m)
30 min.
295 (2.46)
36
722 (17.42)
VpCI-385
Hard
5mil (125 m)
1 hr.
40 (0.40)
35
112 (13.9)
Roll, brush
VpCI-386
Hard
1.5-3mil (37.5-75 m)
1 hr.
150 (1.25)
30
240 (5.8)
VpCI-386
Aluminum
Hard
1.5-2mil (37.5-50 m)
30 min.
152 (1.27)
34-37
280 (6.9)
VpCI-386FR
Hard
4-8mil (100-200 m)
46-49
190.5 (4.675)
VpCI-387
Hard
6-8mil (125-175 m)
1 hr.
150 (1.25)
40
92 (2.2)
VpCI-CorrShield
Gold
Hard
152 (1.27)
37-40
320 (7.9)
VpCI-365
Hard
3-5mil (75-125 m)
17 hrs.
225 (1.78)
70
281 (7.0)
VpCI-367
Hard
2-2.5mil (50-67.5 m)
8 hrs.
300 (2.5)
66-72
530 (13.1)
VpCI-368
30 min.
350 (2.42)
55
300 (7.4)
Water-Based
Urethane
Epoxy
Water-Based
Hard
Epoxy
mil (m)
VpCI-373
Water-Based
Topcoats
Temporary Coatings
Film
Type
Solvent-based
Permanent Coatings
Primers
Product
VpCI-369
Oily
1-2mil (25-50 m)
n/a
30 (0.25)
97
800 (19.6)
VpCI-372
Hard
2-6mil (50-150 m)
1 hr.
50 (0.42)
57
225 (5.4)
VpCI-388
Hard
1-2mil (25-50 m)
1 hr.
135 (1.13)
39
625 (15.1)
VpCI-389
1 hr.
170 (1.42)
40
650 (16.1)
VpCI-390
Hard
2-2.5mil (50-62.5 m)
8-12 hrs.
226 (2.7)
30-34
257 (6.29)
VpCI-391
Hard
1-2.5mil (25-62.5 m)
1-2 hrs.
120 (1.0)
45-50
609 (15.0)
CorrShield
Hard
2-2.5mil (50-62.5 m)
66-72
365 (8.95)
30 min.
66-72
642 (15.7)
Strippable
CorrShield
Transit
Product
Description
Removal/
Cleanup
Topcoat- Length of
ablity
Protection
VpCI-373
Soft, thin, flexible primer for adhesion to aluminum, stainless steel, galvanized and difficult-toadhere-to surfaces. Must be top coated. Good replacement for chromate treatments.
VpCI-433
Long term
VpCI-374
VpCI-433
Long term
VpCI-397
Extremely hard (9H), high temperature aluminum water based silicone coating with a maximum
operating temperature of 1100F (593C). Does not require a topcoat.
MEK
Long term
VpCI-CorrVerter
Non-toxic, water-based primer recommended for application to rusty or poorly prepared steel
surfaces.
VpCI-433
Long term
VpCI-393
A pre-prime that penetrates and binds loose rust and metal into one film. Flexible, and can be top
coated with any of our top coats or epoxies. Contains no VOCs! Excellent salt spray resistance.
MEK
Long term
VpCI-395
VpCI-433
Long term
VpCI-396
A single package moisture cure urethane designed for long-term performance in severe
environments.
MEK
25 yrs.
VpCI-383
An ideal coating for dip applications. For OEM specs. Clear or colors. Semi-gloss appearance.
Can be applied at low thickness.
VpCI-433
3 yrs.
VpCI-385
VpCI-433
6 yrs.
VpCI-386
Our original top coat for multimetal protection. Clear and colors. High gloss (70).
VpCI-433
5 yrs.
VpCI-386
Aluminum
VpCI-433
5 yrs.
VpCI-386FR
VpCI-433
5 yrs.
VpCI-387
VpCI-433
5 yrs.
VpCI-CorrShield
Gold
VpCI-433
5 yrs.
VpCI-365
Available in three colors: black, aluminum, tan. Excellent resistance to salt spray.
VpCI-433
10 yrs.
VpCI-367
Excellent salt spray protection, forms a hard film for medium to long term outdoor storage.
EcoLine
Cleaner/
Degreaser, Solvents
5 yrs.
VpCI-368
Our best temporary coating (oil-based). Dries to a non-tacky film. Conforms to MIL-C-16173E
(Grade 1). Can be removed.
VpCI-411
5 yrs.
VpCI-369
Removable oil-based, outdoor coating that provides a lubricating film. Remains wet to touch.
VpCI-410 Series
5 yrs.
VpCI-372
Our strippable coating, dries semi-transparent. Protects from damaging nicks and scratches.
VpCI-433
3 yrs.
VpCI-388
A removable tack free, firm coating. Matte finish. Dilutable. Ideal for dip or spray. Long-term
indoor storage, short- to medium-term outdoor storage (sheltered).
VpCI-411
3 yrs.
VpCI-389
Our most protective water-based temporary coating. Excellent salt resistance, dilutable. Forms a
lightly tacky film, dries clear, removable. Medium to long-term outdoor storage.
VpCI-411, 414
3 yrs.
VpCI-390
Excellent salt spray protection, with a hard coating for medium to long term outdoor storage.
VpCI-411, 414
3 yrs.
VpCI-391
Excellent salt spray resistance. Easily removable. Medium to long term outdoor storage, available
in custom colors.
VpCI-411, 414
3 yrs.
CorrShield
VpCI-433
2 yrs.
Excellent for protecting equipment, parts and tools during shipping and storage.
VpCI-410 Series
2 yrs.
Strippable
CorrShield
Transit
Visit our web site for more information on Cortec Vapor phase Corrosion Inhibitors.
CortecVCI.com
Total Corrosion Control
Cortec Corporation is dedicated to controlling corrosion at all stages of a product life cycle. Cortec Corporation
has developed a diverse range of corrosion protection products including cleaners, metalworking fluids, waterand oil-based coatings and corrosion inhibitors, rust removers, paint strippers, emitters, powders, packaging foams, paper, films, surface treatments and admixtures for concrete as well as additives for water, oil &
polymers. Contact Cortec for additional brochures and information.
LIMITED WARRANTY
All statements, technical information and recommendations contained herein are based on tests Cortec
Corporation believes to be reliable, but the accuracy or completeness thereof is not guaranteed.
Cortec Corporation warrants Cortec products will be free from defects when shipped to
customer. Cortec Corporations obligation under this warranty shall be limited to replacement of
product that proves to be defective. To obtain replacement product under this warranty,
the customer must notify Cortec Corporation of the claimed defect within six months after shipment
of product to customer. All freight charges for replacement product shall be paid by customer.
Cortec Corporation shall have no liability for any injury, loss or damage arising out of the use of or the
inability to use the products.
BEFORE USING, USER SHALL DETERMINE THE SUITABILITY OF THE PRODUCT FOR ITS INTENDED
USE, AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH.
No representation or recommendation not contained herein shall have any force or effect unless in a written
document signed by an officer of Cortec Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS,
IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO CASE SHALL CORTEC
CORPORATION BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Distributed by:
www.Cortecvci.com