Products

MSPP: TJ1100
Compact CPE with E1, Ethernet interfaces for access networks

Overview
Key Benefits
Specifications
Overview: TJ1100 is an ultra-compact Customer Premise Equipment with STM-1, E1 and 10/100 Mbps Ethernet
interfaces in a fixed configuration. It combines innovative optical networking software, with the intelligence of
SDH/SONET, to deliver an efficient solution to today's service providers.

Ideal Environment: It is designed for the access part of optical network with low to medium traffic volume. It can be
used in multiple access applications transport of E1 & Ethernet from 2G/2.5G/3G wireless backhaul, DSLAM
aggregation from remote locations & enterprise connectivity.

Key Benefits
Compact Node: TJ1100 is a compact 1U STM-1 node with E1 & Ethernet that serves a wide scope of access
needs. It is a cost effective, low-power and easy to manage equipment with plug & play benefits.
Service Protection: TJ1100 provides multi-level protection schemes including MSP & SNCP. It ensures that
even in case of fiber cut in the access networks, your network is still up & running.
Various Topologies: TJ1100 fits into liner, ring, bus and mesh topologies. The TJ1100 can be configured as a
Terminal Multiplexer (TMUX) or an Add-Drop Multiplexer (ADM). Thus it caters to all possible access network
scenarios.
Seamless Integration with TJ1000 family: It is the entry level offering in the Tejas TJ1000 family of
SDH/SONET MSPP products. The product family covers all your networking requirements from CPE to core
optical nodes. The equipments are managed by an intelligent management system that ensures efficient
network operations.

Specifications

Technical Specifications*

Network Topology
Linear, Ring, Bus and Mesh

Network Element Configurations

Add-Drop Multiplexer (ADM)
Terminal Multiplexer (TMUX)

Aggregate Interfaces
2xSTM-1 e/o
S1.1, L 1.1, L 1.2 (ITU-T G.957 compliant)

Other Interfaces
21xE1 (120 ohm / 75 ohm)
4x10/100BaseT

Ethernet
LCAS
GFP
Lower and Higher Order Virtual Concatenation
Full/half duplex, auto-negotiation

Cross-Connect
4 x 4 STM-1
Fully non-blocking
Line-to-line, Line-to-tributary, Tributary-to-line, Tributary-to-tributary

Network Maintenance
Element Management System: TejNES supports full FCAPS functionality
In-band channel control
Alarm signaling indicators and External Contacts

Maintenance
Higher-order and Lower-order POH, SDH/SONET Level alarms and performance monitoring as Per
ITU-T Rec. G.826 and G.784
Remote software downloads
Local and Remote-loop-back
Engineering Order Wire

Timing & Synchronization

Timing & Synchronization of System as per ITU-T Rec. G.813
Internal G.703 compliant oscillator capable of supplying a Stratum3 SEC
Support of SSM byte
Internal and External Timing interfaces: Two E1 BITS interfaces (as per ITU-T G.703)
E1 Tributary re-timing

Protection
SNCP
1 + 1 line protection switching

Alarms and User Data Channel

F1 byte for user data channel

Four potential-free outputs and two potential-free inputs

Environmental
Operating Temperature: 0C to 50C
Relative Humidity: 10% to 90%, non condensing

Power Supply
-48 V DC nominal, -36 V to 60 V or 230 V 50 Hz AC Power Supply
Power Consumption less than 30 W

Compliances
RoHS compliant
*Specifications are subject to change without notification

Products
MSPP: TJ1270
Compact STM-1/4/16 MSPP ideal for data capable access networks

Overview
Key Benefits
Specifications
Overview: TJ1270 is an ultra-compact and dense customer premise bandwidth provisioning equipment designed to
progressively scale from STM-1 to STM-16 capacity (both SDH & SONET versions) to accommodate surging bandwidth
demands in the Access. In addition, it supports line-rate Fast Ethernet and Gigabit Ethernet interfaces with CarrierEthernet capabilities.

Ideal Environment: TJ1270 is ideal for access locations with low to medium traffic. It can be used for connectivity of
E1, E3 and Ethernet interfaces, Electrical and Optical. It supports reconfigurable optical ports and the same product can
be used as part of STM1, STM4 or STM16 rings as the network evolves. These added with Carrier Ethernet capabilities
make it suitable to deliver stringent SLA- backed EPL/EVPL/ELAN services, Voice over IP (VoIP) and mobile traffic
aggregation in 2G/3G backhaul.

Key Benefits
Compact Flexible Node: TJ1270 is a compact 1U node with E1, STM-1/4/16, 10/100/1000 Mbps (Layer 1 &
Layer 2) Ethernet interfaces in the base. It has a traffic slot where a wide variety of traffic modules can be
accommodated. These traffic modules are usable across the product family. Moreover it comes with
different cross size options, power supply redundancy & extended temperature operation for additional
flexibility.
Network Scalability: The control-plane scales to large size networks and the network link speeds can be
scaled from 155Mbps to 2.5Gbps. Service interfaces scale from 2 Mbps to 1 Gbps and support TDM and
Ethernet traffic.
Service Protection: In addition to SDH/SONET protection schemes, TJ1270 also supports new packet-based
protection schemes like Ethernet Ring Protection Scheme (ERPS ITU G.8032) which guarantees sub 50ms
protection switching. Spanning Tree Protocol based restoration is also available for mesh topologies.
Quality of Service: Tejas nodes implement an advanced Quality of Service that allows fine-grained
differentiation and shaping of transport tunnels, customer services and sub-services. Services can be
completely isolated with Virtual Rings.
Integrated Multi Service Delivery: TJ1270 is part of the Future Proof Transport Solution from Tejas that

ensures efficient use of transport bandwidth for provisioning of voice & data services. While supporting
SDH/SONET transport of today, its advanced packet switching technology makes it future ready.

Specifications

Technical Specifications*

Network Topology
Linear, Ring, Mesh

Network Element Configurations

Add-Drop Multiplexer (ADM)
Terminal Multiplexer (TMUX)
Regenerator

Aggregate Interfaces
x STM-1
x STM-4
1/2xSTM-16
S4.1, L 4.1, L 4.2, S16.1, L16.2 (ITU-T G.957 SFP optics)

Tributary Interfaces
21x E1/DS1 on base
63xE1/DS1, 3xE3/DS3
8 x STM-1o / STM-1e
2xSTM-4o

Ethernet Interfaces
FE and GE L1 on base
Line-rate GE over SDH/SONET
Carrier Ethernet switching
MEF EPL/EVPL/ELANservices

Cross-Connect
Non-blocking at VC-12/VC-3/VC-4
Line-to-Line, Line-to-Tributary, Tributary-to-Line, Tributary-to-Tributary

Network Maintenance
Element Management System: TejNES supports full FCAPS functionality
In-band control support using SDH/SONET Overhead Bytes
E1 management channel with drop facility
Alarm signaling indicators and External Contacts
10/100 Base T (RJ45) Management Interface

Maintenance
Higher-order and Lower-order POH, SDH/SONET Level alarms and performance monitoring as Per
ITU-T Rec. G.826 and G.784
Software Downloads
Local and remote loop-back

Timing & Synchronization

Timing & Synchronization of System as per ITU-T Rec. G.813
Internal oscillator capable of supplying a G.813 compliant Stratum3 SEC
Support of SSM byte
Internal & External Timing interfaces: Two E1 BITS interfaces (as per ITU-T G.703)

Alarms and User Data Channel

F1 byte for user data channel
Four potential-free outputs and seven potential-free inputs

Physical Dimensions
Dimensions (H x W x D): 44 mm x 445 mm x 250 mm

Environmental
Operating Temperature: 0C to 50C
Extended Temperature: -20C to 70C (to be ordered separately)
Relative Humidity: 10% to 90%, non condensing

Power Supply
-48 V DC nominal, -40 V to 58 V pull-in range
Power consumption 45W for base configurations and 75W for fully loaded configurations

*Specifications are subject to change without notification

Products
MSPP: TJ100ME
High reliability STM-16 MSPP ideal for high data traffic aggregation

Overview
Key Benefits
Specifications

Products
MSPP: TJ100ME
High reliability STM-16 MSPP ideal for high data traffic aggregation

Overview
Key Benefits
Specifications

Overview: The TJ100ME is a future-proof, carrier-class Multi Service Provisioning Platform ideal for use at regional hub
locations. It is a redundant STM-1/4/16 equipment (both SDH & SONET versions) with tributary protection and Carrier
Ethernet Switching features in a modular architecture.

Ideal Environment: TJ100ME can be used for a wide range of applications such as - high-density access for E1/E3/DS3
and Ethernet services, compact communication backhaul node in wireless networks, aggregation and transport of realtime traffic in optical transport networks. It supports reconfigurable ports and can be used to subtend STM-1, STM-4 &
STM-16 rings. With cutting edge Carrier Ethernet features, it is ideal for packet dominated networks of the future.

Key Benefits
High Density & Compact Solution: In 4.5U form factor, TJ100ME provides 4 traffic slots that can support a
wide variety of traffic modules as per your requirement. As a result, it provides best in class interface
density such as 40x STM-1 & 252x E1. It comes with multiple cross connect size options to help you grow
your network as traffic increases ensuring optimal capex utilization.
High Availability: TJ100ME provides redundancy for cross connect, power supply as well as tributary
protection.
Carrier Ethernet: TJ100ME supports full-fledged Carrier Ethernet based on standardized PBB and PBB-TE
technologies that provide unmatched scalability and Connection Oriented Ethernet.
Service Protection: In addition to SDH/SONET protection schemes, TJ100ME also supports new packetbased protection schemes like Ethernet Ring Protection Scheme (ERPS ITU G.8032) which guarantees sub
50ms protection switching. Spanning Tree Protocol based restoration is available for mesh topologies.
Quality of Service: Tejas nodes implement an advanced Quality of Service that allows fine-grained
differentiation and shaping of transport tunnels, customer services and sub-services. Services can be
completely isolated with Virtual Rings.
Integrated Multi Service Delivery: TJ100ME is part of the Future Proof Transport Solution from Tejas that
ensures efficient use of transport bandwidth for provisioning of voice & data services. While supporting
SDH/SONET transport of today, its advanced packet switching technology makes it future ready.

Specifications

Technical Specifications*

Network Topology
Linear, Ring

Network Element Configurations

Digital Cross-Connect (DXC)
Add-Drop Multiplexer (ADM)
Terminal Multiplexer (TMUX))
In-Line Amplifier
Regenerator

Aggregate Interfaces
1/2 x STM-1/4/16 1310 or 1550 nm (ITU-T G.957 compliant)
S/L 1.1, L 1.2, S/L 4.1, L 4.2, S/L 16.1, L16.2
Upgrade through SFP-change

Tributary Interfaces
E1/DS1, E3/DS3
STM-1o / STM-1e, STM-4
STM-16
10/100/1000 Ethernet Interfaces

Carrier-Ethernet Functionality
PBB based on IEEE 802.1ah
PBB-TE based on IEEE 802.1Qay
Sub-50ms linear and ring protection based on ITU-T G.8031/8032
CFM-OAM (IEEE 802.1ag) and ITU-T EthOAM (ITU Y.1731) for SDH/SONET-like OAM and performance
monitoring
Independent pure-packet mode for 'TDM to Packet migration

Maintenance
HO and LO POH, SDH/SONET level alarms
Performance monitoring as per ITU-T Rec. G.826 and G.784
Local and Remote loop back
Remote Software Downloads

Network Management
TejNES (Networks Element Software) supports full FCAPS functionality
V.24/V.28 Modem interface for remote management
In-band channel control
10/100 Base-Tx (RJ-45) management interface
SNMP interface for NMS

Alarms, User Data channel and Order wire

7 input alarms and 4 output alarms
E1/E2 bytes for Express Order wire
F1 byte for user data channel

Timing & Synchronization

Timing & Synchronization of System as per ITU-T Rec. G.813 compliant Stratum3 SEC
SSM support on S1 byte
External Timing interfaces: Two E1 BITS interfaces (G.703)
Accepts/ Provides 2 Mbps/2 MHz clock references

Protection
SDH/SONET: SNCP, 1+1 MSP, MS-SPRing
Data: RSTP, MSTP, ERPS, ELPS
4VC-12, VC-3 level path protection
E1/E3 Tributary Protection

*Specifications are subject to change without notification