Professional Documents
Culture Documents
Interaction Ship Repair-Conversion and Shipbuilding
Interaction Ship Repair-Conversion and Shipbuilding
C/WP6(2008)6
28-May-2008
___________________________________________________________________________________________
English - Or. English
COUNCIL
ifie
d
C/WP6(2008)6
For Official Use
De
cla
ss
THE INTERACTION BETWEEN THE SHIP REPAIR, SHIP CONVERSION AND SHIPBUILDING
INDUSTRIES
This report is referred for the consideration of the WP6 at its meeting on 3-4 July 2008.
Contact: Structural Policy Division, Mr. Danny Scorpecci. tel: +33 1 45 24 94 33;
fax: +33 1 44 30 62 57; e- mail: [email protected], or
Mr. zgur Umut Senturk,Tel: +33 1 45 24 82 08; e-mail: [email protected]
JT03246634
Document complet disponible sur OLIS dans son format d'origine
Complete document available on OLIS in its original format
C/WP6(2008)6
Summary
This study of the interaction between the ship repair, conversion and shipbuilding sectors was largely
undertaken by Mr. zgur Umut Senturk, who has been seconded from the Government of Turkey to work
on shipbuilding matters. We thank Turkey for this generous voluntary contribution, without which this
project would not have been possible.
Action
This report is referred for the consideration of the WP6 at its meeting on 3-4 July 2008.
C/WP6(2008)6
TABLE OF CONTENTS
INTRODUCTION....................................................................................................................................... 4
THE SHIP REPAIR MARKET .................................................................................................................. 4
THE SHIP CONVERSION MARKET ....................................................................................................... 8
INTERACTIONS BETWEEN SHIP REPAIR/CONVERSION AND SHIPBUILDING INDUSTRIES 13
REGIONAL ACTIVITIES IN SHIP REPAIR/CONVERSION ............................................................... 17
ROLE OF GOVERNMENTS ................................................................................................................... 21
POSSIBLE FUTURE ISSUES IN THE REPAIR/CONVERSION SECTORS ....................................... 22
THE TRANSITION OF REPAIR/CONVERSION YARDS INTO NEWBUILDING WORK............... 24
SUMMARY AND CONCLUSIONS ........................................................................................................ 28
REFERENCES ............................................................................................................................................. 30
C/WP6(2008)6
INTRODUCTION
1.
Basically, ship repair yards offer maintenance services to ship owners, so that the ships can be
operated profitably and kept in proper condition in line with the regulations of the IMO (International
Maritime Organization), their flag states requirements and the minimum standards of classification
societies.
2.
Importantly, ship repair does not necessarily imply the need for a dock, as work (even complex
underwater work) can often be undertaken alongside at berths. This, of course, greatly increases the
flexibility with which ship repair service can be delivered, and minimises the need for extensive (and
expensive) fixed installations.
3.
On the other hand, ship conversion services alter the structure and/or configuration of vessels in
order to enable them to carry out a different purpose than was originally intended when the vessel was
built. The conversion of tankers to operate as bulk carriers is an example of such a conversion. These
conversions are generally substantial in nature, and require the availability of extensive facilities and
labour skills that are often indistinguishable from those required for a new vessel.
4.
Ship repair work is by nature labour intensive1 and not prone to automation. This provides an
immediate advantage to developing economies that have an abundant supply of low cost labour. On the
other hand, as already noted, ship conversion work has significant common characteristics with
shipbuilding, including automation and outsourcing and so this sector does not automatically share this
natural advantage.
5.
Traditional, big repair bases like Rotterdam, Hamburg, Singapore and Japan face increasingly
strong competition in services ranging from simple activities (such as general repairs) to complex tasks
such as extensive refits or conversions. This competition comes from yards Eastern Europe, China and
Vietnam, which are actively entering the market.
THE SHIP REPAIR MARKET
Different yards for different needs
6.
The technologies employed in ship repair have undergone major changes in recent years,
resulting in a drastic reduction in docking and lay up time for repairs. Many yards have invested in
sophisticated equipment to ensure high safety and environmental standards when carrying out maintenance
and repairs, such as the replacement of steel plates, the cleaning of tanks and so on. In addition, modern
vessels are increasingly complex, with automated systems that require constant attention as well as regular
maintenance and rectification and this has also increased the need for greater sophistication and skills on
the part of the service providers.
7.
However, despite advances in technology (such as robotics, modular fabrication, advanced IT
systems and procedures), ship-repair remains a labour intensive business, as virtually every job will be
unique in some respect (e.g. the amount, nature and location of steel replacement) so automation is not
always an available solution.
It is accepted that labour and steelwork related costs are the two main components of ship repair costs, and
that labour accounts for between 50%-70% of total costs.
C/WP6(2008)6
8.
This labour intensity means that facilities that have access to ample skilled, low cost labour will
have a cost advantage for less complex repair/maintenance work over their competitors in higher cost
centres, even if they cannot match them in terms of technology.
9.
This means that the selection of the appropriate ship repair centre has become crucially important
to shipowners, who frequently must decide between the choice of a financially attractive low-cost centre
with the need for a certain degree of reliability and technical sophistication. Therefore, while some owners
will be drawn to lower cost yards in locations such as China (because of favourable steelwork replacement
costs), others may choose yards elsewhere that might offer (albeit at higher cost) specialised vessel
servicing and overhaul. For example, the Singapore based Keppel repair yard have a strong reputation for
servicing LNG and LPG carriers, while some European and USA repair yards have established a
significant niche in the cruise ship sector.
10.
The availability of these different alternatives, give shipowners significant opportunities to select
the service of their choice, but significantly they may not always be able to effectively exercise that choice.
What drives demand for ship repair services?
11.
The main demand for ship repair work stems from pre-planned, scheduled routine maintenance
for the vessels. These scheduled activities are necessary in order to ensure that vessels are seaworthy, and
in optimum operating condition in order to maximise their earning capacity. These scheduled calls at ship
yards for routine repair/maintenance (which may require dry-docking) are also driven by the need for
regular class inspections by classification societies (normally every five years). The important common
characteristic of these scheduled activities is that are pre-planned, and therefore the ship owner or operator
has considerable freedom to choose the repair facility of their choice.
12.
On the other hand, unscheduled repairs, whether through breakdowns or incidents, are clearly
less predictable, and there may be little flexibility in the timing and choice of location to effect repairs. In
these instances shipowners and operators may have no choice but to use local ship repair services,
regardless of the cost or quality of those services.
13.
Apart from breakdowns and incidents, unscheduled repairs are increasingly being dictated by
PSC (Port State Control) authorities, which are targeting their inspections in order to maximise their
chances of discovering defects. These targeted campaigns can be based on types of vessels, flags of
registration and classifications societies, and frequently result in vessels with serious (and sometimes not
so serious) defects being detained until those defects are rectified.
14.
A further determinant of demand for unscheduled repairs is that arising from the conditions of
sale of second ships, where transactions frequently require evidence of a recent dry-docking by the vessel.
Consequently, the extent of the sale and purchase market can become a factor in the demand for dry dock
use.
15.
Also, the re-activation of vessels that are laid up (when demand for vessels is low) is another
element affecting the inspection, maintenance and repair activities. While this has not been an issue for
some time due to the very high level of world economic activity, from time to time it could be very
significant as it was in the 1980s, and it remains a factor in assessing nominal demand for drydock use
(Drewry 2001).
16.
Assessing the future demand for ship repair services is difficult, not the least because (as
mentioned above) a considerable amount of this demand is unscheduled, and will depend on exogenous
drivers. The one thing that can be said about future demand is that its growth will have some relationship
C/WP6(2008)6
with the growth of the world fleet; and based on current order books will be significant in the short to
medium term (eg. to 2012).
The growth of the world fleet
17.
During the course of 2007, the order book for the world merchant fleet grew to a record high
level, four times bigger than what was recorded before the current cycle started in 2003 (see Table 1). The
demand for new ships has exceeded the delivery capacity, and the shipyard order backlog have become
increasingly longer, with shipowners placing orders now not expecting delivery until 2012 or beyond. This
strong demand for new vessels will greatly increase the number of vessels in the worlds commercial fleet,
which will also (gradually and proportionately) increase the natural demand for ship repair and
maintenance services.
Table 1. Shipbuilding new orders in million cgt (2000-2007)
Year
2000
2001
2002
2003
2004
2005
2006
2007
CGT (mill.)
42.90
48.20
48.90
70.80
92.80
107.2
138.0
177.7
18.
Just as there are additions to the fleet, there are also deletions, as vessels become uneconomic or
unseaworthy and are recycled (or scrapped in earlier terminology). However, because of the very strong
demand for shipping service, and the delays in delivery of new vessels, since 2003 demolition levels have
been particularly low, at around 10% of new orders, compared to 70% during the previous cycle (BRS,
2008). Therefore, even as the world fleet is being renewed, the number of old ships is not commensurately
decreasing, particularly in the dry bulk sector where charter rates have been particularly strong, and where
owners have chosen to pass surveys for their older vessels and continue trading.2
19.
As a different measure, recycling was down from 7.2 million dwt in 2006 to 5.7 million dwt in
2007, which is the lowest scrapping activity seen since the early 1990s, indication that until the global
economy tightens (which may now be happening), or the value of scrap steel increases enough (see
Figure 1 ) to make the continued operation of older vessels to become uneconomic, we can expect the size
of the worlds fleet (and therefore the demand for associated ship repair and maintenance services), will
increase (Platou 2008).
Only around 680,000 dwt of dry bulk capacity was sold for demolition in 2007, consisted mostly of
handysizes and smaller units.
C/WP6(2008)6
Figure 1. Steel and scrap prices 1998-2007
20.
The available evidence clearly points to the overall demand for ship repair and maintenance
services increasing significantly in future years, as the maintenance cycles for the growing commercial
fleet (including the newbuildings) come into operation.
21.
While little can be said about the total demand for ship repair and maintenance services, it has
been reported by Worldyards Research3 that the demand for dock space to carry out the five year statutory
drydock cycles for big ships4 (which require dry-docking) is expected to rise rapidly through to 2015, as
shown in Figure 2. Based on the steeply increasing demand for such services (more than 100% between
2007 to 2015), it might be possible to speculate that there will be pressure on repair yard capacity,
especially if some of that capacity has been converted to either conversion or newbuilding work, to take
advantage of the very high demand and high prices for those services.
C/WP6(2008)6
Figure 2. Scheduled repair demand estimate (2007-2015)
C/WP6(2008)6
5
23.
In practice, conversions differ significantly from routine ship repair and maintenance because of
the complex, high value work that is associated with those conversion (with the commensurate need for
higher order facilities and skills). In addition, the time required for the work to be carried out is generally
greater, as conversion contracts might run for months, and in some cases for more than a year, rather than
days or weeks. In these respects ship conversions have elements that are very similar to shipbuilding, and
as such the sector could be considered as a bridge between the more routine ship repair/maintenance sector
and the dedicated shipbuilding yards.
24.
The demand for ship conversion services is driven by a variety of factors, none of them readily
amenable to forecasting. In normal times, shipowners may elect to undertake a conversion in order to
facilitate the entry of the vessels in a different market niche (for example, lengthening a tanker to increase
its capacity). Such decisions are generally opportunistic, and impossible to predict. Generally, however,
there would be few pressures to justify the expenditure of dry-docking such vessels over the alternative of
simply letting them operate (as sunk costs) until they are totally uneconomic and are recycled.
25.
However, this presumes that there is some normality in the shipping market, and that there are no
exogenous pressures that make the effort of conversion worthwhile. In fact, over the years (and at
present), there have been a number of relatively unique circumstances that have strengthened the demand
for ship conversion services.
26.
In our present period, the very rapid economic growth in recent years (principally generated by
China) has placed extreme pressure on the world commercial shipping fleet, especially for dry bulk
carriers. This demand has triggered a strong demand for new vessels that has exceeded the capacity of the
world shipbuilding market to deliver those vessels, leading to lengthening order books and delivery
periods. This in turn has led to a drying up of the normal recycling of older vessels, as shipowners keep
them in service to capitalise on market opportunities.
The Baltic Dry Index is an index covering dry bulk shipping rates and managed by the Baltic Exchange in
London.
C/WP6(2008)6
27.
In turn this strong demand for all types of vessels has created particular shortages in some ship
types, which can sometimes be met by converting some vessels to meet that demand. This has particularly
been the case in the dry bulk market, where demand has been particularly strong, and where, as shown in
Figure 4, increases in time charter rates have been dramatic.
28.
There was a significant increase in 2007 in the number of contracts that were being placed for the
conversion of single hull VLCCs into VLOCs,6 to the extent that it is being reported that ship conversion
yards have become saturated. At the end of the 2007, there were over fifty VLCCs scheduled to start a
second life as a bulk carrier in 2008 or 2009 as well as a number of Suezmax and Aframax vessels (BRS,
2008).
29.
The volume of conversion work is expected to be substantial in the coming years, especially in
Chinese yards such as the Cosco shipyard group7. For example, it was recently reported by Det Norske
Veritas (DNV) that the conversion market is very active, and that it had classed about 40 re-deliveries8 by
the end of 2007, a trend it expects to continue into 2008.
30.
These conversions are expected to contribute to quicker rebalancing of supply/demand in the
tanker fleet (which is oversupplied), and which still counts a sizeable number of relatively young singlehull vessels that could remain in service beyond 2010. On the other hand, these conversions will hasten the
imbalance in the large bulker fleet (vessels over 120 000 dwt) as the many newbuildings on the order
books come into service, even though the majority of the newbuildings are not due to be delivers until
2009 (130 vessels) and 2010 (250 vessels). (BRS, 2008).
31.
In addition to this pressure on the dry bulk market, there have been separate but parallel
regulatory actions at the International Maritime Organization (IMO) that have impacted significantly on
the market.
32.
The loss of the tanker the Erika in December 1999 had a profound impact on the shipping
industry. The IMO introduced new mandatory phase-out requirements which are contained within the new
revised MARPOL Annex I Regulation 13G. Under this Single Hull Phase-Out Schedule, many of single
hull tankers are due to exit the fleet as early as 2010, although some will be allowed to trade past 2010
depending on their Condition Assessment Scheme and flag state regulations. The expected single hull exits
in 20109 shown in Figure 4 (MMA 2007).
7
8
VLCC = Very Large Crude Carrier, VLOC = Very Large Ore Carrier
It operates a network of five yards in China and consolidates its position as the primary provider of ship
conversion services.
DNV makes safety pledge on single hull conversions - Lloyds List 14/11/07
It has been assumed by Mcquilling marine transport that approximately half of the vessels due to exit the
fleet will pass the Condition Assessment Scheme (CAS), and trade beyond 2010.
10
C/WP6(2008)6
Figure 4. Expected single hull exits in 2010
33.
This regulation has created a reservoir of single hulled tankers, capable of being converted for
dry bulk operation, that represent a diminishing assett value to their owners, as well as incurring higher
insurance costs. These tankers are prime candidates for conversion to bulk carrier operation.
34.
The second development that has triggered higher demand for conversion service is related to the
rapidly increasing price of oil. High oil prices and strong demand for oil are triggers for the bringing online of marginal oilfields, as these become more financially attractive. However, because of the lack of
permanent oil extraction and storage infrastructure (which may be uneconomic to provide in small oil
fields) many of these marginal oil enterprises will utilise Floating Production, Storage and Offloading
platforms (FPSOs)
35.
These FPSO take place of fixed platforms and have the added advantage of being relocated
relatively easily to take advantage of short term changes to the production opportunities and the oil market.
These FPSOs can either be purpose built, or be converted oil tankers (generally the large vessels such as
VLCCs Very Large Crude Carriers)..10
36.
Since 2004, the world has experienced a period of high oil and gas prices as shown in Figure 5.
This trend injected new life into the offshore industry during 2007 (BRS, 2008). The search for more and
more oil is driving technology forwards, with much of the exploration and development work being
undertaken in deep and ultra deep offshore waters. This has generated additional interest in FPSOs
(dedicated and converted), as these are virtually the only method of producing, storing and offloading oil
using a single unit from marginal fields in deep ocean sites.
10
The worlds first floating platform was a converted tanker installed in 1976 off Castellon in northern Spain.
At that time off-shore technology was still in its infancy and the tanker market was struggling due to
escalating oil costs caused by the Middle East conflict, which also shut the Suez Canal.
11
C/WP6(2008)6
Figure 5. Oil Prices 1994- 2008 (March)
37.
This has led to considerable interest in the conversion of single hull tankers to FPSOs or similar
units for offshore environments. FPSO conversion contracts typically require in-dock periods of around
210-245 days per contract, considerably less than the newbuild alternative. It has been estimated that
between two-thirds and three-quarters of the units operating as FPSOs, FSOs, etc. are conversions, and the
existing fleet numbers around 110-115 vessels.
38.
However, there is also a view that the FPSOs of the future will need to be larger and more
sophisticated, in order to incorporate more innovative designs and the efficient integration of operational
and marine functions, and this may mean that the simple conversion of tankers might not be viable in the
longer term (Drewry 2002). Nevertheless, the conversion of single hull tankers into ore carriers and
FPSOs is a significant development. In 2007, this absorbed 4 million dwt of tankers, but in 2008 it could
be closer to 15 million dwt, and could drag supply below the demand trend line as shown in Figure 6
(CRSL, 2008).
Figure 6. Conversion of single hull tankers
12
C/WP6(2008)6
INTERACTIONS BETWEEN SHIP REPAIR/CONVERSION AND SHIPBUILDING INDUSTRIES
39.
While there are some significant differences between the activities of the shipbuilding, ship
conversions and (particularly) ship repair sectors, there are nevertheless a number of similarities, and in
many case all of these activities could be carried out in the same yard, as is the case, for example, at the
Gdansk repair yard Remontowa.11
40.
It is suggested that these similarities, rather than their differences are the dominant elements that
need to be considered when looking at possible interactions between these otherwise separate sectors, and
these are considered in more detail below.
Location
41.
In most cases the basic infrastructure required by the ship repair and ship conversion industries
are generally similar to that of the shipbuilding industry, However, these are some special considerations
between the sectors that may affect where those yards that specialise in one particular sector of the
industry may locate their facilities.
42.
Generally, shipbuilding has generally been regarded as the more capital intensive activity, and
therefore higher in the value chain than ship repair. As such it has generally been the more attractive
option for yards in the more developed economies, which made significant investments in major
shipbuilding facilities. While this increasingly also been the case in the emerging economies, it is also true
that their focus has been ship repair/conversion, which was more suitable for the large number of small
yards in those emerging economies, which although not technically advanced could count on a significant
supply of low cost, relatively skilled labour.
43.
While yards that specialise in newbuilds or major conversions would not be so sensitive to
location (because of the discretionary nature of the contracts and the length of time that the work would
take), those yards that specialise in the ship repair sector would have a distinct advantage if they were
located close to major sea lanes or key loading/discharge points. This is because such strategic locations
will minimise the amount of vessels down-time experienced by shipowners, and would make those repair
facilities more attractive than those that are situated in less convenient locations. Examples of such
strategic locations are Singapore, the Arabian Gulf and the Mediterranean.
44.
Further, in order to take advantage of economies of scale, there is usually a clustering of
shipbuilding and ship repairs industries at some specific locations. Within the leading shipbuilding
economies there are dedicated shipyard clusters for shipbuilding and ship repair activities in order to
achieve a more focussed work force and extract production efficiencies. Although this is not a hard and
fast rule, the effect of this can be seen in Japan, China and South Korea which are better known as
shipbuilding economies, whereas Singapore, Dubai and Bahrain have emerged as ship repair centres.
Operational issues
45.
One of the other critical differences between ship construction and ship repair (but to a lesser
degree ship conversions) is that in ship construction any change in work pattern or schedule is avoided if at
all possible, whereas in ship repair the expectation is that there will be change.
11
The yard was established in 1952 and privatized in 2001. Remontowa S.A. specialises in ship repairs and
conversions, design and construction of new ships, offshore units and steel structures.
13
C/WP6(2008)6
46.
A ship construction project, once the design is sufficiently advanced and assuming there is a
well-organised production system in place, can be planned in detail with a high degree of certainty. This
planning certainty means that in order to be as efficient as possible, newbuilding activities have become
increasingly industrialised in their mode of operation, and have become more ship assemblers than ship
builders.
47.
Therefore, the focus is increasingly on the control and management of all construction processes
that are needed to maximise efficiency and reduce construction costs. This has brought to the fore crucial
areas such as modularisation, information systems, logistics management, sub-contracting, working with
external suppliers and adopting industrial rather than workshop methods of construction. As a
consequence, the fabrication of components in shipbuilding is therefore increasingly outsourced.
48.
However, such a rigid (albeit efficient) procedure cannot always be applied to ship conversions,
largely due to the uncertainties that are inherent in such major vessel modifications; regardless of the preplanning that may take place. Uncertainties about the condition of the existing structure and systems may
mean that the conversion may need to be re-planned after the initial stages.
49.
Therefore, by their very nature ship conversions will require considerably more internal
flexibility to undertake a variety of tasks in-house, and the yard must retain many of the skilled workers
and workshop facilities that shipbuilders are increasingly keen to outsource.
50.
In many cases, conversion projects will affect the longitudinal strength, structural integrity and
stability of the vessel. This will also require the yard to retain design and construction skills, as well as
equipment and infrastructure, capable of dealing with significant structural changes to vessels.
51.
The scale and complexity of many conversion projects means that these operations are very
similar to the building and new ships, and in some cases could also justify the techniques used in newbuild
yards; the outsourcing of a lengthening section of a hull, for example.
52.
At the other end of the scale, for the ship repairer the operational challenges are far more
complex. In the first instance, there are few routine jobs which can be used as a basis for productivity
measurement. While work such as hull cleaning or painting can be based on the specification and area to
be covered, the actual underwater hull condition, which is the starting point, may only be clear when the
ship is docked. In addition, for many items the workload associated with the task is variable, so that once
work commences there may be variations in the tasks, which result in significant variations in the manhours needed.
53.
This means than many workshop skills need to be kept in-house, which although making the
yard more flexible (and therefore more able to respond quickly to unexpected circumstances) it also means
that they would incur higher costs than their dedicated counterpart yards. Also, as dedicated repair yards
they would have to keep a relatively high inventory of spare parts and components in order to minimise
down time for shipowners who use their facilities.
54.
Generally, it would seem that ship conversion activities are a bridge between pure shipbuilding
and ship repair, although it seems to have much greater affinity with the former rather than the latter. It
would also appear that it would be easier for shipbuilding yards to take on ship repairs than vice versa, but
repair yards have been known to shift from ship repair12 to shipbuilding, as they have acquired better skills
12
On the other hand, developing economies like India and China have found that ship repairs are not only
attractive, but also useful to generate employment and as a source of regular revenue.
14
C/WP6(2008)6
and improved their infrastructure. Some of the shared characteristics between the sectors are explored in
more detail below.
Shared characteristics
55.
The similarities between ship repair/conversion, and shipbuilding, facilities mean that the
conversion from one focus to the other, while complex in terms of repositioning the business, would not be
impossible.
56.
For example, shipbuilding yards take the opportunity of fluctuations in demand for new
constructions by also offering repair and maintenance services. In some cases it also works the other way,
as small and medium sized repair yards (in particular) might complement their repair activities by engaging
in small-scale new-building activities; perhaps ferries, tugs and smaller commercial vessels, in order to
cope with cyclical fluctuations in the repair and maintenance business. As an example, HMD-Vinashin13
yard decided in 2007 to start building a series of Handymax bulkers in their yards, which until then had
focused exclusively on repairs and conversions (BRS 2008).
57.
This flexibility in the positioning of yards depends to a large degree on the availability of
facilities and skills in the yards, and the type, magnitude and complexity of work that these facilities and
skills would allow. As explored earlier, dedicated shipbuilding shipyards are moving more and more into
assembly, with more and more parts/components being outsourced. This would reduce the ability of such
industrialised yards to effectively compete in the more flexible repair market (but this would be unlikely
to affect their ability to move into the conversion sector).
58.
From the opposite direction, dedicated repair yards might lack the design and logistics
management skills, and equipment/infrastructure to compete effectively against the dedicated shipbuilding
yards, although they might be able to compensate for this through access to large amounts of low cost
labour (and especially if the there is an excess of demand over capacity).
59.
Table 2 shows the main facilities that might be common, or different, in two yards, one
specialising in repair, and the other in shipbuilding. It indicates conceptually the areas where one or the
other would find themselves uncompetitive (or at least inadequately prepared) if a decision were taken to
move from one activity to the other. Because of its greater affinity to shipbuilding than to ship repair, a
ship conversion facility would share the greatest commonality with shipbuilding yards (Chabane 2004).
13
Hyundai Vinashin Shipyard Co., Ltd. (HVS), founded in 1999 as s service shipyard that serves multiple
repairs, conversion.
15
C/WP6(2008)6
Table 2. Common facilities between ship repair and shipbuilding/conversion yards
60.
What this table essentially shows is that there can be considerable differences between the yard
facilities that could be expected to be found in yards that specialise in either construction (and probably
conversion) or repair. This is not to suggest that this differentiation will be found in all yards, but that
these differences are indicative of the kind of specialised in-house facilities that could expected to be
found in (or absent from) such yards as they head towards their particular specialisation.
61.
One important aspect of the inherent differences between these different types of facilities is that
yards that specialise in repair, with little need for advanced design capability, would find it more difficult
to enter the newbuilding market where such capabilities are essential.
62.
Conversely a yard that. as part of specialising in newbuildings outsources smaller steel
fabrications, might find it more difficult to move to ship repair work where such a capability would be in
constant demand because of the type of work that ship repair would entail.
63.
Therefore, from the above it would be possible to generally conclude that while both ship
repair/conversion, and new building facilities share the same basic needs and characteristics, there are also
some significant differences which means that they are not always totally technically, operationally and
commercially interchangeable.
64.
Like shipbuilding facilities, repair yards require a heavy financial investment. Dry docks are
expensive, and most integrated repair yards also have two or more piers supplied with appropriate cranes,
power, water and access which are a necessity for alongside repairs14. These items also need to be
accessed by the dock or the shore position. The easiest and quickest means by which a repair facility can
increase its capacity is through the acquisition of floating docks, which are inherently unsuitable for new
constructions. Table 3 shows the basic specifications of dock systems (one of the most expensive
14
In ship repair, it can be assumed that on average 70% of the work can be done when the ship is lying in the
water, and that he ship has to be dry-docked for only 30% of the work.
16
C/WP6(2008)6
infrastructure items in newbuild and repair yard investment), including their operation possibilities in both
repair and new construction (Drewry 2002).
Table 3. Main Ship repair dock systems
Operational
possibilities
Docking times
Operation
Maintenance
Service Life
Slipway System
Shiplift/Lift Dock
System
Floating Dock
Graving (Dry)
Dock
principally new
construction
Repair/conversion &
new construction
Normally, repairs
and minor
conversions only
Repair/conversion
and new
construction
Approx. 1 hour
Skilled personnel
needed
Skilled personnel
needed
Skilled personnel
needed
Simple operation
Significant
Minor
Considerable
Minor
Breakdown of rails
after long period of
corrosion. Servicing
of winches
Limited corrosion of
platform as
submerged only
during docking
Protection of the
steel structure
against corrosion
is necessary
Locking gates,
pumps etc.
10-15 years
25 years
15-20 years
30 years
65.
While some the workshops in both shipbuilding and repair yards would be almost identical, in
some instances workshop extent, layout and design would differ depending on the target vessel types for
the facility. The optimum yard layout for any particular repair site is not something that can be drawn from
a specific template, due to different sites and management strategies, geographical location and support
industries.
66.
In addition, repair yards must have a wider variety of tools than those required by shipbuilders,
since each repair job can be unique. On the other hand ship repair yards do not need to invest as heavily
in major capital equipment as shipbuilding yards, and any such investment that is undertaken is more
directly connected with the prospect of using those facilities for ship construction when shipbuilding
demands makes a shift in focus economically viable.
REGIONAL ACTIVITIES IN SHIP REPAIR/CONVERSION
67.
This paper is not intended to be an exhaustive analysis of the ship repair and conversion sectors,
but is intended to be an overview of the interactions between these largely service sectors, and the
shipbuilding industry. Nevertheless, an attempt has been made to lay out some of the major regional
activities involving ship repair and conversions, in order to provide a basic understanding of where
activities are focused, and what major groupings are functioning.
Europe
68.
European repairers, faced with strong competition from lower cost repairers in Singapore, China
and the Middle East, have focused their attention on intra-regional markets, as well as more complex
conversion and specialist activities. Privatization, restructuring, and a shift to more flexible work practices
encompassing a greater degree of subcontracted work, have characterized European repair developments
17
C/WP6(2008)6
since the 1990s (OSC 2002). Emphasis on quality, expertise, and tight scheduling has also helped bolster
repair/conversion activity among some European yards.
69.
Repair facilities based in the Mediterranean are also likely to face increased competition from
expanding yards in the Black Sea, as well as yards in Asia. Whilst it is expected that general repair work
will continue to form the core of Mediterranean yard activity, a number of those yards are expected to
expand into more specialist services, such as the focus by the Italian Fincantieri group on repair/conversion
(particularly for cruise vessels) at its dedicated yard in Palermo.
70.
The opening up of Central and Eastern Europe since the early 1990s has added to the supply of
repair/conversion facilities, especially as state owned facilities have been progressively privatised, thus
enabling them to greatly increase the range of services offered. While these new yards brought a measure
of low cost competition in the European scene it appears that some are already losing their cost advantages
to newer entrants, and it has was recently reported in Lloyd`s List15 that ship owners are now weighing up
sailing times if they are considering Baltic or Polish yards, since it could be more economical to have
maintenance and repairs done closer to their main trade routes.
Middle East
71.
In the Middle East, particularly in the UAE and Bahrain, there has been considerable investment
in facilities and the importation of labour from low cost regions such as India, Pakistan and the Philippines,
to build up a competitive ship repair industry. The yards at Dubai and Bahrain are able to capture many of
the tanker vessels that converge here, as well as ships supplying commodities to the Gulf States. On a
percentile scale,16 if the cost of ship repair in the Middle East is set at 100, costs are estimated to be 250 in
Japan, 150 in Europe and 50 in China.
72.
It has recently been reported by Lloyds List that construction of the Ras Laffan shiprepair yard
17
project in Qatar is making tangible progress, with the 43ha repair yard primarily focusing on servicing
LNG carriers. However, the intention is that it will also service and repair a wide range of vessels, as well
as conversion of tankers to FPSO and FSOs.
Asia (excluding China)
73.
South Korea, perhaps benefiting from the restructuring that followed the Asian financial crisis in
the second half of the 1990s (when the Won lost about 40 - 50% of its value in four months), has
maintained a successful balance between ship repair and new building activity and continues to broaden its
capability to handle a broad range of commercial vessels.
74.
On the other hand, Japans higher labour costs has made it less competitive in the repair market
than the competition in China, Korea and Singapore, and it is understood that this has led Japanese repair
yards to concentrate on domestic niche markets (see Table 4 ), where efficiency and automation, rather
than simply low costs, can give them a competitive edge. By doing this Japan will maintain a strategic
level of ship repair capability, even though the market share of its shipbuilding industry has declined
following its dominance in the 1970s and 1980s.
15
16
Reported in Lloyd`s List 21\04\08 in the article Albwardy to benefit from its partnership with Damen.
17
18
C/WP6(2008)6
Table 4. Japan shiprepair industry domestic/foreign vessels
Year
Domestic vessels
Foreign vessels
No.
No.
1997
31,094
150,955
1,697
27,995
1998
29,494
162,105
1,598
25,860
1999
28,605
110,804
1,598
24,568
2000
26,821
101,960
1,460
19,714
2001
26,130
94,861
1,403
22,784
2002
23,477
87,220
1,145
23,194
2003
21,505
120,107
967
18,610
2004
20,353
135,724
1,135
23,728
2005
19,003
79,309
944
21,162
2006
18,681
78,251
823
26,152
18
75.
Singapore has traditionally been a very active ship repair and conversion centre, its dedicated
yards benefiting from its strategic position in one of the busiest sea-lanes in the world and the popularity of
its port (also one of the busiest in the world). Its reputation for high quality work and its unparalleled
location are key factors for Singapore continuing as a significant repair/conversion centre in the future. In
addition, there is evidence that Singapore yards are increasingly looking at newbuildings to diversify their
activities.
76.
Also, Singapore has sought to maintain its leading role in ship repair by entering into alliance
agreements with major ship owners and operators, and attempting to retain its long-standing reputation as a
relatively low cost centre by hiring labour from lower cost sources such as China, Malaysia, India and the
Philippines.
77.
A number of Singapore facilities which may be uncompetitive at basic ship repair activities are
key players in specialist sectors. An example is Sembcorp Marine, which while probably being at a cost
disadvantages in conventional repair work compared to rival yards in lower cost centres, has used its
expertise in offshore conversion to retain a strong market presence.
78.
Vietnam is the most significant of the recent entrants in the worlds shipbuilding market, and is
attracting considerable investment from foreign investor into its yards because of the support from the
Vietnamese government, the availability of infrastructure and its large pool of skilled, low-cost labour.
79.
While it is understood that the majority of this foreign involvement is focused on newbuilding
facilities, there will be an inevitable flow-on effect on other Vietnamese facilities; especially the older ones
that may no longer be attractive for newbuilding construction, but which may find a niche by providing
repair and conversion services.
18
19
C/WP6(2008)6
80.
While India has not traditionally been considered as a ship repair/conversion centre (except for
domestic users) it has been published in the report Working Group for Indian Shipbuilding and Ship
Repair Industry for the Eleventh Five Year Plan (2007-2012) by the Government of India, that the
existing docking facilities had not grown to meet the requirements of modern tonnage. This meant that
with the commencement of new refineries on the Indian coast, the number of VLCCs used on those trades
is bound to increase, with growing potential for the docking of such vessels. Moreover, it has been
reported in this report that the vicinity of Gujarat to the adjacent Middle East oil fields could also attract
substantial tanker repair business (IMS 2007).
China
81.
Since the opening up of the Chinese economy there has been considerable expansion in its repair
and building capacity on account of low labour costs and investment incentives. Chinese yards are also
continuously improving quality, expertise, and productivity and broadening the range of work that they can
undertake.
82.
During the last decade, there has been evidence of an increasing Chinese yard presence, with
some FPSO conversion work also being undertaken. As far back as 1996, the Shanhaiguan yard was
involved in FPSO conversion work, under sub-contract to Hyundai HI. This yard and others, such as
Sembawang Bohai, Qingdao Beihai and Yantai Raffles, continue to operate successfully in the offshore
sector for rig work and/or FPSO/FSO related work. (SRJ 2007).
83.
Foreign investment in Chinese repair facilities is set to expand, with established repairers in
Hong Kong, Singapore and Japan seeking joint-venture projects in order to establish facilities supported by
a low cost base. Ongoing investment in facilities and skills is set to sustain long term growth, and increase
the volume of higher value repairs and conversion contracts.
84.
Nevertheless, despite this investment in both repair and newbuilding capacity, Chinas repair
yards are all experiencing very high levels of utilisation and are also experiencing the shortages of skilled
labour that is affecting the industry as a whole at the present time, and will need to reach further into its
labour pool in order to find skilled employees.
85.
Significantly, from a structural perspective, it has been recently reported by Lloyds List that the
COSCO Shipyard Group19 is looking to acquire ship repair yards overseas in order to overcome rising
costs in China, rather than develop new greenfield sites. However, it is not clear where such expansion in
the repair area would take place. Recent experience involving other economies suggests that South-East
Asia could be a target, as Hyundai has entered into a joint venture with Vinashin in Vietnam, and
Singapores Keppel Shipyard has ventured to the Philippines with investment in three yards in that
economy.
86.
In June 2007, a new 300,000 dwt dry dock was completed at Cosco Zhoushan yard in China,
following the opening of a new 80,000 dwt dry dock that was commissioned in March 2007. As a result of
these two projects, Cosco has picked up a series of major conversion contracts such as VLCC to VLOC
and FPSO conversions. As a result of these investments the groups annual repair capacity increased to 1.7
million dwt, an increase of 28% compared with the position at the end of 2006.
87.
Indeed, 2007 was a very significant year for Chinas ship repair and conversion industry, with the
countrys largest single repair yard now in operation on Mazhou Island in the Pearl River delta, near the
growing port of Shenzen. Operated by the well-established Chinese ship repairer Yiu Lian Dockyards, the
new USD 292 million repair facility, which covers an area of 700 000 square metres, opened in May 2007
19
COSCO shipyard group looking to acquire overseas shiprepair yards - Lloyds List 22/02/08
20
C/WP6(2008)6
when its 3 000 metres of repair berths became operational. The facilitys core business will be repair and
conversion, primarily of VLCCs, as well as specialised containership repairs.
88.
Moreover, it has been recently reported by COSCO Corp (Singapore),20 a subsidiary of Chinas
largest shipping group, that ship repair and conversion operations have started at its new joint venture
shipyard Lianyungang in Jiangsu province. The yard comprises three 220 m long berths, an 80 000 dwt
capacity floating dock and covers 220 000 sq m. A further eight berths will be developed in four phases by
2011 at Qidong in Jiangsu province, following a land purchase deal with COSCO Nantong Shipyard
agreed in January 2008.
Other geographic areas
89.
While there are other minor centres where ship repairs and conversions are undertaken, these
tend to be either high cost, domestically oriented, or lack the technical expertise to attract significant
outside contracts. Australia/NZ, Africa (especially South Africa) and central and South American facilities
tend to fall into one of these categories.
90.
In the US, the repair industry continues to be focused on captive Jones Act vessels (as is its
newbuilding industry) as well as offshore and cruise ship work (the latter associated with the US and the
Caribbean status as the worlds largest cruise ship market).
ROLE OF GOVERNMENTS
91.
Traditionally ship repair activities have been largely national rather than commercial in nature,
with considerable public sector ownership of facilities which could be used or leased by one or several
repair companies. However, in recent decades this picture has changed, due to the privatisation of state run
operations, the possibility of establishing joint ventures to bring outside commercial capital and expertise
into state facilities, and business consolidation.
92.
Also, the more liberal investment rules and the opening up of access to lower cost locations has
led the creation of wider and more complex business arrangements that have created a reach into regional
and global markets.
93.
While it was clearly governments that began this liberalising process, it is actually quite difficult
to establish what their ongoing role is in the development of the ship repair and conversion sectors. It is
known that while government support for the shipbuilding sector generally has decreased, there are still
significant financial and other incentives provided to the industry (for details, see the OECD Inventory of
Subsidies and other Support Measures).
94.
However, the focus of data seems to be on the newbuilding sector, and it is virtually impossible
to establish what proportion of this assistance (if any) is directly provided to the ship repair and conversion
sectors. It may be that with many yards working in both sectors such distinctions may be difficult, or
indeed impossible, but the point here is that this is unknown, and so too (by consequence) is the true role of
governments in the sectors.
95.
Governments may give assistance to ship repair industry and shipbuilders in a variety of ways
such as direct subsidies, tax incentives, cheap credits and restructuring assistance. Governments also
heavily support R&D and innovation programmes, and while these are probably mainly are related
shipbuilding activities (where the benefits of such activities are more likely to accrue), some might also
concern repair and conversion activities, due to the commonality of many processes and techniques.
20
21
C/WP6(2008)6
96.
Governments should have considerable interest in ship repair and conversion activities because of
their significant potential for direct and indirect employment of labour. Unlike shipbuilding where almost
70% of the equipment and materials (including steel) in terms of value are imported, the reverse is the case
in ship repairs where almost 100% work is done locally. Therefore, in many economies governments
apply some measures such as soft loans, exemption from service tax, relief from custom and excise duties
and others in order to support those activities (see IMS 2007 for an example).
97.
However, an intensive search for specific government objectives and targets for the ship repair
and conversion sectors, as well as details of direct or indirect support provided to them, has failed to find
any significant information sources. This could be because the shipbuilding sector is treated as a
homogeneous activity, with no distinction between newbuildings, conversions and repairs, or that the
repair/conversion sectors tend to be less visible and fail to be separately accounted for. While the former is
more likely to be the case, it might be significant that even in the case of the extensive statistics collected
and published commercially, most of them fail to provide regular data on their outputs including quite
significant conversion activities. This might be fertile ground for further investigation in the future.
POSSIBLE FUTURE ISSUES IN THE REPAIR/CONVERSION SECTORS
98.
Because it is so difficult to find information related specifically to these sectors of the broader
shipbuilding industry, this section is necessarily brief and relatively speculative, and has been drawn from
snippets of information collected in the course of preparing this analysis.
99.
It has already been established that the demand for ship repair services is directly related to the
size of the worlds fleet (particularly for programmed maintenance), and that this is currently rapidly
growing; a situation that is unlikely to be affected (at least in the short to medium term) by the present
financial problems precipitated by the US sub-prime problems.
100.
The choice faced by owners as to which repair facilities to use will remain broadly similar, and
will centre around price, location or specific specialisation. However, it is understood that, since the
introduction of tougher safety regulations by IMO and the introduction of the International Safety
Management Code for the Safe Operation of Vessels,21 many owners are now looking more seriously at the
quality of repairs (NG 2003).
101.
It is possible that ship repair yards could be asked to provide stronger guarantees of steel work in
the near future, since steel quality and the need for guarantees of work for up to five years are early
suggestions coming out of the IMO debate into goal-based standards. The issue of the quality of steelwork
is also being discussed as part of a research project looking at the effects of repairs on tankers, which is
considering how the effects of a repair can change over time, and how they may create unknown and
unpredicted stresses on a ships hull.22
102.
Developments such as these, aimed at establishing minimum quality standards for ship repairs,
could be a significant factor in the future, and may act to strengthen the appeal of some of the more
traditional repair/conversion facilities in higher cost locations. At the very least, facilities that offer low
cost repair/conversion services will have to ensure that they can meet these future requirements.
21
This is known as the International Safety Management (ISM) Code and applies to all types of vessels of
over 500 gross tons, including mobile offshore units.
22
Reported in Lloyds List 16/10/07 in the article Yards encouraged to guarantee standard of steel repair
work
22
C/WP6(2008)6
103.
The conversion sector is less predictable, but it can be anticipated that once the 2010 target for
the removal of most single hulled tankers has been reached, then the ready supply of vessels that would
otherwise be approaching their shelf life will dry up. This will probably severely limit future demand for
the conversion of tankers to bulk carriers.
104.
As noted earlier in this report, there some issues are already being raised regarding the future
suitability of FPSO conversions to meet expected the higher standards and capabilities demanded for their
operation as floating oil platforms. In any event, as the demand for newbuildings slows, as it is doing right
now, then this will free up newbuilding yards to undertake the work, and the falling demand, together with
rapidly growing shipbuilding capacity, is likely to also bring down the cost of newbuilt FPSOs.
105.
It has also pertinent that it has been reported by Lloyds List23 that owners of single-hull tankers
are starting to review the economics behind conversions to very large ore carriers, due to rising cost of
steel for the conversions (see Figure 7), and the higher prices being paid for vessels offered for demolition.
As an example of the latter, the price paid by vessels recyclers in Bangladesh for tankers recently increased
to USD 715 per ltd24, around 25% more than the USD 500 per ltd price on offer at the start of the year.
Figure 7. Heavy steel plate export price 2003-2007
106.
Measuring future demand for ship repair services is difficult because while some maintenance
and inspection activities are predictable, and can be programmed, others due to breakdowns or incidents
are not, and need to be undertaken at short notice. Also demand for repairs is governed by the need to
balance the laying up of vessels to keep it in a seaworthy condition, with the necessity of keeping it
commercially operational to meet market demands. Crucially, all of these elements are subject to variation
and tend to be in a state of flux. However, despite this unpredictability, in an aggregate sense demand for
ship repair services is related with demand for shipping services and the development of the world fleet,
and this permits some general trends to be drawn from developments in the markets.
107.
The Shiprepair and Conversion Technology journal reported that 2007 saw a remarkable upsurge
of underwater repair work globally, particularly in the commercial sector, which traditionally has been
more reliant upon dry-docking. The range of repairs undertaken without dry-docking has also increased,
23
VLCCs head for breakers as demo prises soar - Lloyds List 10/03/08.
24
LTD = light ton displacement , it is a general used measurement to calculate the scrap value of a vessel.
23
C/WP6(2008)6
and has included work such as the fitting of anodes25 and complete hull plate repairs by means of
underwater welding, as well as hull cleaning of yachts, naval vessels, commercial ships of all sizes and
FPSOs. These developments will have the effect of easing pressure on dry-dock facilities at times when
high demand for the construction of new vessels tends to absorb these facilities; even those that tend to
specialise in repair and maintenance work. The successful continuation of these innovative practices when
pressure on dry-dock facilities ease (as they almost certainly will, as demand for newbuildings is falling)
will depend on whether these specialised services can remain technically and economically attractive.
108.
Citigroup Global Markets reported that Asia, in particular, is set to accelerate its phase-out of
single hull tankers, which might cause an increase in conversion activities26. This is largely as a result of
higher insurance costs and tighter regulations following the recent Hebei Spirit oil spill in South Korea, as
well as to the high volume of soon-to-be-retired single hull VLCCs operating in the region (see Figure 8).
Figure 8. Single hull VLCC vessels
27
Source: Clarkson .
25
Anodes are fitted under water hull area for the external cathodic protection of vessels.
26
South Korea and India are the only countries to have increased the number of single hull, very large crude
carriers on charter in the last two years, and nearly 96% of single hull VLCCs now trade in Asia, due to
tighter rules in USA and Europe.
27
Asia to sound death knell for single hull tankers Lloyds list 12/12/2007
24
C/WP6(2008)6
111.
The latest shipbuilding boom has now extended for most of this decade, and as postulated in
Figure 9 has virtually doubles the rate of deliveries per year between 2003 and 2010 (although demand is
expected to soften to a still historically high level from 2011 onwards) and represents an almost tenfold increase in demand since the late 1980s (ABS 2007).
Figure 9. Historic and projected deliveries mdwt
112.
As a result of this sustained high demand for newbuildings, prices have also climbed
significantly, making the entry into the construction of new vessels more attractive (Figures 10, and 11).
Figure 10. Bulk carrier and container ships building prices
25
C/WP6(2008)6
Figure 11. Tanker building prices
113.
Shipyards responded to this market opportunity by expanding their facilities, investing in new
greenfield sites, and increasingly moving from ship repair/conversion to construction, in order to add to
their building capacity. In turn this has had the effect of tightening the market for those types of services,
and there is concern that the level of transition by ship repair/conversion yards into the new building
market is seriously affecting the ship repair market.
114.
The most visible sign of the shipbuilding boom is the rush to expand facilities, convert ship repair
yards and build new yards in China, which has rapidly increased its order books to the extent that it expects
to challenge becoming the largest shipbuilding economy within the next decade, if recent trends continue.
115.
New shipyards have been opening up in China almost on a monthly basis in order to offer early
deliveries of bulk carriers. Based on the delivery dates in its orderbook, China will deliver 25.3 million dwt
in 2008; 45.9 million dwt in 2009 and 58.3 million dwt in 2010, which if achieved would propel China to
the top of the shipbuilding league (Figure 12) (Stopford 2007).
116.
As an example of this, Cosco Shipyard Group (CSG), which until recently specialised in repair
and conversion, has decided to move heavily into the newbuilding market,28 with the group envisaging the
opening of several construction sites at Dalian, Zhoushan and Guangzhou.
117.
Also since 2002, as one of the signs of Chinese repair yard transformation into newbuilding
activities, there have been 29 VLCC29 docks either created or planned for construction by 2010, whereas
there were only 3 docks built before 2002 as shown in Table 5. (BRS 2008)
28
Reported in Lloyds List 22/02/08 in the article COSCO shipyard group looking to acquire overseas
shiprepair yards
29
26
C/WP6(2008)6
Figure 12. China Shipbuilding deliveries 1997-2011
Yard name
Year 2002-2007
Planned
Ownership
Behai
2 (2008)
State owned
Bohai
State owned
Cosco Dalian
State owned
1 (2008)
State owned
Cosco Zhoushan
Dalian New yard
State owned
Dalian yard
State owned
State owned
Jiangnan Changxing
State owned
Jinhaiwan
Private
NACKS
Private
Nantong Rongsheng
1 (2008)
Private
New Century
Hudong Zonghua
State owned
Qingdao Beihai
State owned
SWS
State owned
Yantai Raffles
Private
Total
25
27
Provincial
C/WP6(2008)6
118.
There are some significant signs that, especially in China, there is concern that significant
bottlenecks will appear in ship repair activities, and some specific remedial action has begun to be put in
place. For example, Chinese Titan Quanzhou is currently active in the shipbuilding sector only, but the
yard is building a major new repair facility which should be operational by 2009. It is expected to be
capable of carrying out VLCC repairs and FPSO conversion projects. (SRJ 2007)
119.
It has also been reported by CSG (COSCO Shipyard Group) that the Lianyungang yard in China
will boost the groups ship repair and conversion capacity, which has been reduced during the past year as
it shifted into the shipbuilding business. Following its move into shipbuilding at the beginning of 2007,
CSG has captured some USD 3.4 billion worth of orders for 84 newbuildings during the year, taking up a
good portion of its shiprepair capacity. Some owners have confirmed fears that there could be a shortage of
ship repair capacity as more and more yards opt for higher value newbuilding work.
120.
Another example for the movement of yards from ship repair to shipbuilding is Hong Kong based
IMC (International Maritime Carriers) Group, which is expanding its shipyard business in China with two
new yards,30 one focusing on ship repair and the other on shipbuilding. IMC is already in the ship repair
business in Thailand with Unithai Shipyard and in China with Zhoushan IMC-Yongue Shipyard.
121.
However, as a final point, the dramatic increase in world shipbuilding capacity may turn out to be
excessive if demand softens in 2011 as is widely expected, which will almost certainly mean that many of
those repair yards that progressed to shipbuilding may start reverting back to their core functions at about
that time.
SUMMARY AND CONCLUSIONS
122.
The principal purpose of this paper was to explore the interaction between the ship repair, ship
conversion and shipbuilding industries, and was not intended to be an in-depth analysis of the ship repair
and conversion sectors themselves.
123.
While the differentiation between the ship repair and conversion is somewhat fuzzy and artificial,
because of the ability of dedicated yards to move from one activity to the other, or even undertake the
different activities simultaneously, there are nevertheless some observations that can be made about them.
124.
For ship repair (including scheduled maintenance activities), the rapidly growing fleet will
provide the foundations of an on-going base work load providing services for that fleet.
125.
This strong demand may encourage yards to retain skills and operational flexibility to continue to
specialise in the repair market, but it can also be expected to attract conversion and construction yards to
enter the repair market if demand for conversions and new buildings declines (as it is expected to after
about 2011).
126.
On the other hand, on current trends, the ship conversion sector has a somewhat uncertain future.
First, the availability of single hull tankers (which have formed the mainstay of ship conversion activities)
is likely to dry up as the IMO deadline for their being taken out of service approaches. In addition, the
continuing high price of steel may also sentice owners to recycle their old vessels rather than risk a
conversion.
30
These two new yards will be located in Zhoushan and Dalian Chengxing.
28
C/WP6(2008)6
127.
Second, even if some availability remains there are indications that the bulk carrier fleet (which
has absorbed many conversions) is likely to become saturated, especially if newbuilding slots become
more freely available as newbuilding demand falls.
128.
Third, even the conversion to FPSO may diminish in the near future, as more marginal fields
come on stream that will require more sophisticated and versatile FPSOs than can be economically
provided through the conversion of old tankers.
129.
This may also place considerable pressure on yards that are largely dedicated to conversion work
to consider their future, and the decision to remain in conversion, or switch at least some of their capacity
to newbuilding or repair, will not be easy.
130.
The transition of repair/conversion yards to newbuilding work to take advantage of the very high
demand in recent years has been covered in the report. Whether such transitions can survive in the longer
term is a significant issue, but not one that could be examined in detail in this paper.
131.
However, the implications of this; that repair, conversion and newbuilding yards have sufficient
similarities that enable them to move from one sector to the other, opens up another interesting area,
which is what does such flexibility do for overall shipbuilding capacity?
132.
While dedicated shipbuilding facilities are clearly the most important in establishing the
magnitude of shipbuilding capacity, it would seem that the ability of other yards to move in and out of
newbuilding activities would have some impact on the overall capacity of the shipbuilding sector, and
should not be ignored.
133.
One particular area where this concept might be particularly important is negotiations on a new
Shipbuilding Agreement, which were paused in September 2005. In those negotiations the issue of
whether the ship repair sector should be covered by the Agreement (as it was in the 1994 Agreement) was
unresolved, and perhaps this analysis will provide some additional material and viewpoints for
consideration when those negotiations resume (presuming they do).
29
C/WP6(2008)6
REFERENCES
C/WP6(2008)6
31