Professional Documents
Culture Documents
Dactyloscopy 2
Dactyloscopy 2
COLLEGE OF CRIMINOLOGY
URDANETA CITY
DACTYLOSCOPY
CHAPTER 1
VALUE OF FINGERPRINTS
I. INTRODUCTION
Fingerprint Science is a positive means of identification and in the hands of
knowledgeable technician and expert; it is a potent weapon in the continuing fight
against crime. Its formation started during the embryo growth stage and perfected
within around four (4) months. Friction ridges can be distinctively observed on how
these friction ridges:
a.
b.
c.
d.
Design ends
Joint
Separate and
Cross each other
The individualized characteristics are never affected by:
a. Physical growth
b. Aging of the human body
It has been established that in criminal investigation fingerprints is absolutely
impermissible to misidentify a person or to classify a non-criminal as a criminal. In
contrast, personal identification by means of fingerprints has an absolute certainty.
The system is based on the undisputed fact after so many studies, that NO TWO
PERSONS HAVE EXACTLY THE SAME FINGERPRINT INDIVIDUAL
CHARACTERISTICS.
The ridges do not tell everything about a person neither his race nor sex, yet
it surely a perfect means of identifying him. This contention verily adds to facilitate
and mobilize the granting of justice and the punishment of the guilty in the light and
shadow of a criminal act.
Surprisingly, fingerprint ridges start their development and differentiation on
the third embryonic life and continue to grow until the complete development and
growth factors governing the life span of man.
II. NATURE OF FINGERPRINTS
A. Concept
Fingerprints are composite of the ridge outlines formed/reproduced when
perspiring. On non-hairy skin the ridges are formed by the different patterns
determined to distinguish identity whereas on hairy skin, the ridges are
irregular, slender and intermittent and do not form any pattern.
3
fingerprinting was Rajyadhar Konai a local businessman, to frighten him out
all thought of repudiating his signature to a contract. In 177, he requested
permission to take fingerprints of prisoners in jail, but was denied.
1880 Dr. Henry Faulds English doctor stationed in Tokyo, Japan. He
published the practical use of fingerprints to identify criminals. He introduced the
practical theory of reproducing fingerprints through the use of greasy materials.
Discovered too the presence of skin furrows. He propagated the PRINCIPLE OF
INFALLIBILITY.
1883 Mark Twain (Samuel L. Clemens) wrote an episode entitled Mark
Twains Life in Mississippi, the episode relates how a murderer perpetrated the
crime. Eleven years later, he caused the publication of Puddin Head Wilson, a
noble based on dramatic fingerprint identification during a court trial. His story
pointed on the infallibility of fingerprint identification.
1888 Sir Francis Galton a British Anthropologist and Biologist who
published his study on classification and filing system using all the ten (10)
fingers. He assigned the patterns in to three (3) general types: ARCHES, LOOPS
and WHORLS. He concluded that no two prints are identical and an individuals
prints remain unchanged from year to year.
1888 - 1901 Sir Edward Richard Henry succeeded Sir Herschel and
published his study on the four divisions of fingerprint classification known as
Henry Fingerprint Classification System. The first man to successfully apply
fingerprints for identification. He was known as the Father of Modern
Fingerprints.
1901 Marked the official introduction of fingerprinting for criminal
identification in England and Wales. Sir Henry simplified fingerprint classification
and made it applicable to police identification. The basic Henry system with the
modifications and extensions is used by the FBI and Law Enforcement agencies
throughout US today.
Alphonse Bertillon a French Criminologist who devised specific method
of identifying criminals through anthropometric measurements and personal
characteristics such as the color of eyes, scars and body measurements. His
introduction was known as the Bertillon System
1891 - 1896 Juan Vucetich an Argentinean Police Officer who installed
fingerprint the first files as an official means of Criminal Identification in Argentina.
He was known as the father of fingerprints in all Spanish-speaking countries.
In 1892, he made the first criminal fingerprint identification. He was able to
identify a woman by the name of Rojas who murdered her two sons, and cut her
throat in an attempt to place the blame on another. Her bloody print was left on a
door post, proving her identity as the murderer.
E. Official Use of the Fingerprints in the United States
1882 Gilbert Thompson a U.S. Geodetic Surveyor who used thumbprint
for camp order on an expedition to New Mexico. He used his own fingerprints on
a document to prevent forgery. This is the first known use of fingerprints in the
United States.
1902 Dec. 19 Sir Henry P. Forrest - Chief Medical Examiner of New York
Civil Service Commission and an American Preacher used fingerprints to identify
4
applicants to take the qualifying Civil Service Exam. Installed the first known
systematic use of fingerprints.
1903 New York State of Prison in Albany claims the first practical
systematic use of fingerprints in the US to identify criminals.
Captain James Parke of the New York State of Prison officially
installed/adapted the Henry Fingerprint System as a means of personal
identification of prisoners.
1924 the FBI Identification Divisions was established after J. Edgar Hoover was
appointed Director.
F. Evolution of Fingerprint
1903 Fingerprints were adopted in the following penitentiaries:
a.
b.
c.
d.
Singing Sing
Napanoch
Auborn
Clinton
5
1922 Haken Jersengen, the sub-director of police in Copenhagen,
Denmark introduced the first long distance identification to the US at a Police
conference. The method was adopted and published in a magazine entitled,
Publications of the International Police Conference, New York City Police
Department, 1932.
1924 The book entitled, Single Fingerprint System, by T.K. Larson was
first published in US (Barkley, Police Monograph Series D), Application and Co.,
New York City.
1924 The first National Bureau of identification was created by the act of
Congress in US DOJ, Washington DC.
1925 Harry J. Myers II installed the first official fact finger print system for
infants in the Jewish Maternity Hospital in Philadelphia, Pennsylvania, USA. The first
identification system in the United States.
1925 The Commonwealth of Pennsylvania, USA used compulsory foot and
fingerprinting of new born infants and mothers, which was enacted into law by Act of
General Assembly as approved on April 20, 1925.
1933 The Bureau of Identification, US Department of Justice adopted the
Single Fingerprint Identification System. The first national use of single print for
identification for purposes of certain crimes only. Later, in the same year the first
National Civil Voluntary Fingerprint file was established.
1937 The Institute of Applied Sciences installed the Photographic and
Firearms Identification (Forensic Ballistics) laboratories. The first private school in
US which installed laboratories for instructional purposes only.
1938 A book by Harry J. Myers II, History of Identification of Fingerprints in
US, was published in Fingerprint and Identification Magazine (Chicago, Illinois, Vol.
20, No. 4; October 1938).
G. Fingerprint Use in the Philippines
1819 Fingerprint has been used or introduced in the Philippines by Chinese
traders
1937 Attorney Augustin Patricio the first Filipino authority in fingerprinting
and who topped the first examination on fingerprints given by Captain Thomas
Dugon of the New York Police Department.
1937 Mr. Flaviano Guerrero the lone Filipino member of the FBI who
gave the first examination of fingerprint in the Philippines
Mr. Generoso Reyes the first fingerprint expert employed by the Philippine
Constabulary, Camp Crame, Quezon City.
Philippine Educational Institute (now PCCr) - First school authorized by
the Government to teach Police Sciences.
III. OTHER METHODS OF PERSONAL IDENTIFICATION
a. Tattooing old times signifies family group, clan or tribal relations. It
did not last long because it can be duplicated, changed or disfigured.
6
b. Scarification cutting some parts of the body to leave scars or marks.
c. Bertillon System Personal description, portrait parle speaking
likeness photography. Anthropometry identification based on the
measurements of the various bony structure of the human body.
d. Blood Samples/Examination now DNA, comparison of tissues and
fibers to determine cells/chromosomes.
e. Odontology denture comparison and identification
f. Hair Sampling DNA examination and comparison (Fingerprinting)
IV. Uses of Fingerprints
a. Identification of criminals whose fingerprints are found at the crime scene
b. Identification of fugitive through a comparison of fingerprints
c. Assistance to prosecutors in the presenting their cases in the light of
defendants previous records
d. Imposition of more equitable sentence by the courts
e. Furnishing identification data to probation and parole officers and parole
boards for their enlightenment in decision makings
f. Means of personal identification
g. Identification of unidentified deceased
h. Recognition by the government of honored dead
i. Prevention of hospital mistakes in the identification of infants
j. Identification of persons suffering from amnesia and unconscious where
fingerprints are on file
k. Identification of missing persons
l. Personal identification of victims of disaster works
m. Licensing procedures for automobile, aircraft and other equipment
CHAPTER 2
PRINCIPLES OF FINGERPRINTS
1. TWO FIELDS OF FINGERPRINT STUDY
A. Classification dividing the fingerprints by type and characteristics according
to their pattern and transforming them into a formula for easy filing and future
reference.
B. Identification or Comparison
i.
ii.
iii.
Admissibility
UK 14-16
9
23. Upthrust an ending ridge of any length rising at a sufficient degree from
the horizontal plane.
24. Ridge Characteristics are those points of the tails in the formation of the
pattern.
Kinds of Ridge Characteristics
a. Appendage a short ridge at the top or summit of a recurve usually
at right angle
b. Bifurcation - the dividing of one line into two or more branches
c. Converging ridge a ridge whose close end is angular and serves
as a point of convergence; pointed and abrupt
d. Core a point on a ridge formation usually located at the center or
heart of a pattern
e. Delta a point on the first ridge formation directly at or in front and
near the center of the divergence of the type lines.
f. Enclosure, island or islet a bifurcation, which does not remain
open but which the legs of the bifurcation after running along side
by side for a short distance, come together again to form a single
ridge once more.
g. Dot or series of dots
h. Ending ridge
i. Incipient ridges unusual type of ridges found in small percentage
of patterns; short, narrow and badly formed ridges found between
two well-formed and full-bodied ridges.
j. Short or series of short ridges
10
CHAPTER 3
1. LEGALITY OF FINGERPRINTS
It is a universal knowledge that fingerprint is the most positive means of
personal identification. As such, fingerprint as evidence is accepted in every court of
justice in any part of the globe.
It is an accepted principle that there is no possibility of finding two individuals
to possess identical fingerprints or that nature never duplicates itself in the smallest
details.
Pioneers of fingerprints, Galton and Locard believe in the Law of Probability in
the duplication of fingerprints between two individuals. This view however is
disputable considering that fingerprints are as old as mankind. If Adam and Eve, the
first man and woman who have populated the earth, have fingerprints then the
probability of duplication of fingerprints among individuals may have been a
possibility. But up to the present time, every police department of the world used
Fingerprints as a means of personal identification; NOBODY has ever found
individuals possessing identical fingerprints.
A. USA CASES
1. PEOPLE VS. JENNINGS, Illinois (1911). Illinois Appellate Court first
court to pass upon the admissibility of fingerprint as evidence.
-The US Supreme Court passed upon the admissibility of fingerprint
evidence stating that persons experience on the matter of fingerprint
identification may give their opinion; and further said, there being no
question as to the accuracy or authenticity of the photographs on how
fingerprints were collected, the weight shall be given to the testimony of
experts and in issue thereto shall be resolved by the jury.
2. STATE VS. CERCIELLO, New Jersey (1914)
-The New Jersey Court of Errors and Appeals held that the fingerprints
found upon a hatchet near the body of a murdered person are admissible
in evidence. The evolution in practical affairs of life whereby the
progressive and scientific tenderness of the age are manifested in every
other department of human endeavor cannot be ignored in legal
procedure. It is for those scientific processes, which are the work of
educated and skilled men in their various departments, leaving the weight
and effect entirely to the consideration of the jury.
3. COMMONWEALTH VS. ALBRIGHT, 101 Pa Sup. CL 317 (1931)
A Fingerprint expert testified that the fingerprint on a piece of glass,
established to be from a pane in a door that had been broken to effect
entrance to the house was the same as the impression of the defendants
left index finger. The expert explained the details of the identity.
The court said, the papillary lines and marks on the fingers of every
man, woman and child posses an individual character different from those
any other persons and that identical characteristics is very remote.
11
a. PHILIPPINES
4. BILANGAWA VS. AMADOR, Court of Appeals No. 37320-b)
A Fingerprint Expert and constabulary Sergeant testified and
successfully defended fingerprint evidence based on eight (8) identical ridge
points.
5. PEOPLE VS. MEDINA (59 Phil. 330)
- This is the first leading judicial decision in Philippines Jurisprudence on the
Science of Fingerprint. The Supreme Court held, that evidence as to the
correspondence of fingerprints is admissible for the purpose of identity. That
although a portion of the impression on the box was somewhat blurred, it did not
seriously interfere with the comparison of the two fingerprints. It is a settled rule that
where the collection of evidence is not in question, the admissibility is lodged with
the court.
II. ADMISSIBILITY OF FINGERPRINT TESTIMONY
Settled is the rule, that fingerprint evidence has become a fixed part of our
system of jurisprudence. It has become relatively accurate in establishing personal
identity.
Query:
Ans.
No, as long as the dermis of the bulbs of the fingers is not completely
destroyed, the fingerprints will always remain unchanged and indestructible.
Query:
Ans.:
There is a considerable controversy regarding the possibility of forging
fingerprints by burning them with acid or making a simulated impressions or a
perfect replica of impressions of the fingers. Various experiments conducted by
authorities and although they could almost make an accurate reproduction, still
there is no case on record known or had been written that forgery of fingerprints
has been a complete success. The introduction of modern scientific equipments,
new techniques and up to date knowledge in crime detection always foil the
attempt.
Query: Are fingerprints inherited?
Answer: The general shape or overall pattern of fingers and palms can be inherited.
Family members will often have similar patterns or designs on the same fingers of
their hands. The tiny details in the fingerprints, ridges, however, ARE NOT inherited
and is different between all friction skin areas of all persons - - - even between twins.
III. REQUISITES AS BASIS FOR ABSOLUTE IDENTITY
There is NO national or international rule or laws that fix the number of ridge
characteristics that must be present in both the Questioned and Standard prints
that should be used as a basis for establishing absolute identity.
However, fingerprint experts in these countries believe that identity can be
established in lower number of guidelines laid down by the famous French
Criminologist, Dr. Edmond Locard,
12
a)
b)
c)
d)
e)
Yes, provided the arrest was legal, this is to establish the true identity.
IV. WEIGHT OF FINGERPRINT
The weight to be given to evidence of correspondence of fingerprint when
offered to prove identity of the accused as the person committing a crime is for the
determination of the court in the light of all the surrounding facts and circumstances.
A slight blurring or imperfection of the fingerprint preventing positive
identification will not affect the sufficiency of such proof as to effect a conviction
based with the crime. To warrant conviction, the fingerprints corresponding to those
of the accused must have been found in the place where the crime has been
committed.
V. REASONS WHY FINGERPRINT IS ONE OF THE MOST INFALLIBLE MEANS
OF PERSONAL IDENTIFICATION
INFALLIBLE means incapable of error
1) Fingerprints are already formed 3 to 4 months of intra-uterine life and
will remain unchanged through out life until decomposition of the body
sets
2) The patterns formed by the papillary ridges contains peculiar
characteristics upon which a person can always be identified
3) Almost every police and law enforcement agencies through out the
world accept, adopt and utilize the fingerprint system as a means of
absolute identification of a person
4) The court and other authorities had taken cognizance of its importance
and reliability as a means of identification.
13
CHAPTER 4
REAL OR TRUE FINGERPRINT IMPRESSIONS AND DATA BASE MAKING
A. What are real Impressions?
Impressions of the finger bulbs with the use of the fingerprint ink on the
surface of the paper through any coloring materials, which will produce
visibility.
B. Two methods of producing impressions:
1. Rolled Impressions requires that the thumb be rolled away from the
center of the subjects body.
2. Plain Impressions requires that the fingers be taken or printed
simultaneously, then the thumbs without rolling.
Equipment
a.
b.
c.
d.
e.
f.
14
a. Aberration of printing of the fingerprint
b. Ink too much thick
c. Too fast rolling speed
d. Press to hard
e. Rotation is not smooth, as they roll the finger on the paper
E. Fingerprint System is an arrangement, which in order to effectively utilize
fingerprints in criminal investigation, provides for their systematic collection,
classification, arrangement, custody and use.
* Two (2) Sub-systems:
1) Ten (10) Fingerprint System include the ten (10) fingerprints in
cards taken upon lawful arrest. This is to confirm the identity and
the criminal history of the arrested person.
2) Single Fingerprint System fingerprints of suspect collected one
by one. This is to deduce the identity of the criminal through his
latent fingerprints. Under this system, the prints of all the ten (10)
fingers are kept one by one in custody as basic material.
* Methods and Effects on the Use of Single Fingerprint System
a) Positive deduction of suspects identity This is to deduce
the
identity of a suspect by comparing a latent fingerprint with the single
fingerprint card.
b) Designation Inquiry This is an inquiry made, whenever a
suspect has come to the fore with respect to a case for which the scene finger
prints have been forwarded from the police station, i.e., to the fingerprint
center by designating the name with whom comparison is needed.
c) Under-name Fingerprints Fingerprints impressed under a
signature on an application for pawning or any other official document.
Criminals often disguise themselves in transactions involving documents but
the fingerprints impressed on the document will reveal the true identity of the
person.
d) Identification of other crimes Latent prints when matched to
the fingerprints establishes absolute identity.
* Preparation and Custody of Fingerprint Materials
Since fingerprint materials are permanently kept in custody and utilized
as the basic materials of the fingerprint system, they should be correctly prepared
and kept in custody:
1) Preparation of fingerprint materials
a) Fingerprint the suspect immediately upon arrest
b) Take palm prints too
c) Employ the rolled and plain impressions method
2) Impressions of Fingerprints To make correct classifications possible, all
impressions must be made correctly and clearly
3) Methods of Impressing
15
a) Rolling Impressions done by fully rolling the fingers from one side to
the other
b) Flat or Plain Impressions done in order to make sure whether or not
rolling impressions are correctly impressed unto the specified column. In
impressing, it must be up to the middle phalange.
c) Palm print impressing is to impress palms unto the palm print
impression column. Impress it fully with extended palms.
4) Impressing Techniques
a) General Technique or Ordinary Impressing
Position of Impresser/Operator the impressing plate is on the left side of the
table while the glass plate or cardholder is on its right side.
Positions of Persons The Impressing attendant or operator is on the left side
while subject is on the right side of the operator and about 20 cm off/away from
the impressing table
b) General Rules in Impressing
1) Maintain impressing implement cure of glass plates and roller from
dust
2) Wash fingers thoroughly
3) Dry the fingers before impressing
4) Apply proper amount of ink
5) Dont double impress
6) Dont forget flay impressing
c) How to thin ink
Place small amount of ink, thin the ink evenly with a pallet and a roller, The
roller is rolled one way leaving the glass plate after every stroke, the ink can be
thinned quickly and evenly.
Density of Ink the amount of ink needed for impression per person is the
volume of a match head.
Impressing Subject is advised to look to the front or side, without stiffening his
hand.
d) Extra-ordinary Impressing
Excessively sweating fingers apply formalin alcohol liquid to each finger, then
print;
Finger with stiff joints Impress after shaking the subjects hand grasped by the
wrist up and down several times to smoothen the joint movement.
Fingers with stiff surface skin, coarse fingers, and fingers suffering from
dermatophytosis wrap fingers in a steamed towel for several minutes then
impress
F. Problems encountered by fingerprint operator
16
17
* Fingers without percolate (strained) wipe them with a piece of cloth/gauge
with alcohol, soften them thoroughly with your fingertips, stretch wrinkles and then
impress.
* Fingers with percolate use molding process after drying with lycopodium
powder
In order to obtain fingerprint impressions from silicon molds, strippable paint
or cortex shall be used. This technique is as follows:
The molded silicon rubber shall be stretched and split
Its circumference shall be pinned up
Strippable paint or cortex shall be thinly applied to it with a small flat brush and
then be dried with a dryer
After repeating this operation several times, the mold shall be stripped of the
film, which shall be round, the operators finger be applied with ink and then be
impressed.
4. Fingers with Peeled-off surface skin
* When the true skin is exposed, take photograph after applying ink to the true
skin.
5. Fingers of charred body
* In case it is feared that they will disintegrate even by the slightest touch or
move their photographs shall be taken as they are.
6. Mummified or Adipocered ( fat from decomposition tissues)
Fingers
* Take their mold with silicon, make films with strippable paint or cortex, and
impress.
H. POSTMORTEM FINGERPRINTING Benefits
1.
2.
3.
4.
18
CHAPTER 5
TYPES OF PATTERNS AND INTERPRETATION OF FINGERPRINTS
A. GENERAL TYPE OF PATTERNS each group bearing the same general
characteristics or family resemblance. The patterns may be further divided into subgroups by means of the smaller differences existing between the patterns in the
same general group.
1. Arch 5 % (Plain and Tented) are impressions in a pattern area where the
ridges enter on one side of the impression and exit on the other side with a
wave or rise in the center.
2. Loops 60% - 65% (Ulnar and Radial) are type of patterns in which one or
more of the ridges enter on either side of the impression, recurve, touch or pass
an imaginary line drawn from the delta to the core and terminate toward the
same side of the impression where it originally entered.
3. Whorls 30% - 35% (Plain, Double Loop, Central Pocket Loop and
Accidental) are types of pattern in which at least with two deltas present.
B. RULES GOVERNING THE SELECTION OF DELTA
01. The Delta may not be located at a bifurcation, which does not open
towards the core;
02. When there is a choice between a bifurcation and another type of
delta, the bifurcation is selected;
03. When there are two or more possible deltas, which conform to the
definition, the one nearest to the core is chosen;
04. The Delta may not be located in the middle of the ridge running
between the type lines towards the core, but at the nearest end only.
a. RULES GOVERNING
SELECTION OF CORE
THE
19
D. PATTERN INTERPRETATIONS
1. Arches
a. Plain Arch the fingerprint pattern in which the ridges enter on one side
of the impression then flow out on the other side with a rise or wave in
the center.
b. Tented Arch fingerprint pattern in which most of the ridges enter upon
one side of the impression and flow out upon the other side, as in plain
arch type, however, the ridge or ridges at the center do not.
Types of Tented Arch
1) One or several ridges in the center form an up thrust
2) The ridge or ridges at the center form a definite angle, that is 90
degrees or less
3) That type in which, the pattern may have two or three of the four
essential requisites of a loop pattern.
2. Loops That pattern in which one or more of the ridges enter on either side of
the impression, recurve, touch or pass upon an imaginary line drawn from the
delta to the core and terminate or tend to terminate in or toward the same side
of the impression from where such ridge or ridges enter.
a. Ulnar Loop (U) type of pattern in which the ridges flow toward the ulna
bone or little finger.
b. Radial Loop (R) derived its name from the radius bone of the forearm;
it is a type of pattern in which the ridges run its direction towards the
radius bone or thumb.
Requisites of a loop pattern;
-
* RIDGE COUNTING - the process of counting the ridges intervening between the
delta and the core. Neither the delta nor the core is counted when an imaginary
line is drawn connecting them.
1) When a bifurcation is exactly at the point where the imaginary line crosses,
two ridges are counted.
2) If the line crosses an island both sides are counted.
3) Fragments and dots are counted as ridges only if they appear as thick and
heavy as the other ridges in the immediate pattern.
3. Whorls
a. Plain Whorl simplest form of whorl construction and is the most
common of all types of whorl. It is a fingerprint pattern, which has two
deltas and at least one ridge making a complete circuit in the form of a
spiral, oval, circular or any variant of a circle MUST touch or cross the
imaginary line drawn between the two deltas.
20
b. Central Pocket Loop - a fingerprint pattern, which has two deltas and at
least NO ridge making a complete circuit, which may be spiral, oval,
circular or any variant of a circle DO NOT touch or cross the imaginary
line connecting the two deltas. It is called a composite or transitional
pattern because it is made up of two patterns in one, a whorl inside a
loop.
c. Double Loop Whorl consist of two separate and distinct loop
formations, with two sets of shoulders and two deltas. One of the loops
surrounds or overlaps the other and also called composite pattern, like
the central pocket loop whorl.
d. Accidental Whorl it is a pattern consisting of a combination of two or
more different types of pattern except plain arch with two or more deltas.
* WHORL TRACING When the deltas have been located, the ridge emanating
from the lower side or point of the extreme left delta is traced until the point nearest
or opposite the extreme right delta is reached. The number of ridges intervening
between the tracing ridge and the right delta are then counted.
Ridge traced inside is three or more Inner or I
Ridge traced outside is three or more Outer or O
Ridge traced inside/outside is two or less Meeting or M
E. COMPONENT OF FINGERPRINT PATTERNS
1. Pattern Area part of a loop or whorl in which appear the cores, deltas and
ridges
2. Friction Ridges/Papillary/Epidermal Ridges - are the raised strips of the skin
on the end joints of our fingers and thumbs, by which fingerprints are made.
3. Furrows are depressions or canal-like between the ridges which maybe
compared with the low area in a tire tread.
21
10. Forms of a Delta
a. Bifurcation
b. An abrupt ending ridge
c. Dot or series of dots
d. Eyelet/islet/island or enclosure ridge
e. A short ridge
f. A point on the first recurving ridge located nearest to the
center and in front of the divergence of the type lines
11. Forms of a Core
a. Bar or a rod
b. Staple core
c. Fragmentary core
12. Recurving Ridge a ridge that curves back in the direction in which it started.
13. Appendage A short ridge at the top or summit of a recurve usually at right
angle
14. Incipient or Nascent Ridges a kind of ridge which is madly formed, thin,
short or broken which appear or appears in the depressions between two well
formed ridges
15. Puckering as growth go, some or several ends of the ridges curls slightly.
16. Staple Single recurving ridge at the center of the pattern area
17. Spike An ending ridge at the center of a pattern, which forms the upthrust
18. Delta A point on a ridge at, or in front of, or nearest to the center of, the
divergence of type lines.
19. Core the central point of convergence of the pattern of approximate center of
the pattern
20. Convergence two or more lines forming an angle, a ridge whose closed end
is angular and serves as a joint or convergent.
F. QUESTIONABLE PATTERNS
Reasons why there are questionable patterns:
1) No two fingerprints will appear exactly alike;
2) Differences in the degree of judgment and interpretation of the individual
classifying fingerprints;
22
3) Difference in the amount of pressure used by the person taking the prints;
and
4) The amount or kind of ink used.
Rules of consideration:
1) A very difficult and unusual pattern it has characteristics of three types,
the whorl, the loop and the tented arch. It is given the preference of an
ACCIDENTAL TYPE OF WHORL (reference to as loop and as tented arch).
2) The difficulty lies in locating the delta, type lines and the core in order to
determine what type of pattern is it.
G. THE CLASSIFICATION FORMULA AND EXTENSION
1. The Classification Formula
At this point it is necessary to mention that when prints are classified,
markings are indicated at the bottom of each finger block to reflect the type. The
following symbols are used:
a) Under the Index Finger, the appropriate capital letters should be
placed for every pattern except the Ulnar Loop;
b) Under all other fingers, the appropriate letter should be placed
for every pattern except the ulnar loop and the whorl as follows:
Arch . . . . . . . . . . . a
Tented Arch . . . . . t
Radial Loop . . . . . . r
c) Ulnar loops in any finger are designated by a diagonal line
slanting in the direction of the loop.
d) Whorls in any finger are designated by the letter W.
* The classification formula may be composed of the following divisions:
1) Primary
2) Secondary
3) Sub-secondary
4) Major
5) Final
6) Key
Key
Final
Major
Primary
Secondary
Sub secondary
Div
Class
Class
Class
M
L
32
32
U
W
101
000
10
9
Major
Primary
Secondary
Second Subsecondary
Classification
Subsecondary
Div
Class
Class
Class
23
20
1.
M
L
32
32
U
W
SLM
SSL
101
000
10
9
SECONDARY CLASSIFICATION
The Secondary classification appears just to the right of the fractional numerals,
which represents the Primary. It is shown in the formula by capital letters
representing the basic types of patterns appearing in the index fingers of each hand,
the right hand being the numerator and the left hand the denominator.
There are five (5) basic types of patterns, which can appear:
1. Arch - - - - - - - - - - 2. Tented Arch - - - - - 3. Radial Loop - - - - - 4. Ulnar Loop - - - - - 5. Whorl - - - - - - - - - 3.
A
T
R
U
W, C, D, X
Prints with an arch or tented arch in any finger or a radial loop in any except the
index finger constitute the small letter group of the secondary classification. Such
small-letters, with the exception of those appearing in the index fingers, are
brought up into the classification formula in their proper relative positions
immediately adjacent to the index fingers.
4.
SUB-SECONDARY CLASSIFICATION grouping of loops and whorls placed
just to the right of the secondary classification.. Only six fingers are involved,
2,3,4,7,8 and 9.
Ridge Count
Index Finger
1 9 = Inner/I
10 or more = O
Middle Finger
1 10 = Inner/I
11 or more = O
Ridge Tracing
Ring Finger
1 13 = Inner/I
14 or more = O
= Inner or I
= Outer or O
= Meeting or M
24
5. MAJOR DIVISION is placed just left of the Primary Division.
CLASSIFICATION CHART
R THUMB
R INDEX
RIGHT HAND
R MIDDLE
R RING
R LITTLE
is 16 OR less
1-11=S
12-16=M
17 and over=L
1-9=I
1-10=I
1-13=I
10 or over=O
11 and over=O
14 and over=
RIDGE COUNT OF SECOND SUBSECONDARY
is 17 OR over
1-17=S
18-22=M
23 and over=L
1-5=S
6-12=M
13 and over=L
L THUMB
L INDEX
1-8=S
9-14=M
15 and over=L
LEFT HAND
L MIDDLE
1-11=S
12-16=M
17 and over=L
1-10=S
11-18=M
19 nd over = L
L RING
L LITTLE
1 to 17
ridges count
25
o On the right hand, by counting the intervening ridges from left delta to
the core
o On the left hand, by counting the intervening ridges from right delta to
the core
Double Loops, count the ridges from delta to the core of the upright loop or
O If the double loop is horizontal, the nearest core is used.
7. KEY DIVISION It is obtained by counting the ridges of the first loop appearing
on the fingerprint card (beginning with the right thumb), exclusive of the little fingers,
which are never considered for the key as they are reserved for the final. The Key no
matter where found, is always placed to the extreme left of the numerator of the
classification formula.
H. CLASSIFICATION OF SCARRED PATTERNS/AMPUTATION MISSING AT
BIRTH
Rules:
1) When an impression is so scarred that neither the general type of pattern nor
the ridge tracing or count can be determined with reasonable accuracy, the
impression should be given both the general type value and the sub classification
value of the corresponding finger of the other hand;
2) When an impression is partially scarred, attempt to use ridge counting or tracing
of the impressions; otherwise refer to the corresponding finger of the other hand;
3) When both fingers are scarred, both patterns are given the arbitrary value of
whorls with meeting tracing.
Classification of amputations and fingers missing at birth
The purpose is to prevent the appearance on later cards of impressions of
fingers though to have been amputated but which in reality were merely injured
and bandaged when previous prints were submitted.
0 If one finger is amputated, it is given a classification identical with that of the
opposite finger, including the pattern and ridge count or tracing and referenced to
every other possible classification;
0 If two or more fingers are amputated, they are given classifications identical
with the fingers opposite, with no additional references;
0 If two amputated fingers are opposite each other, both are given the
classification of whorls with meeting tracings.
0 If all ten (10) fingers are amputated or missing at birth, classification will be
M32W MMM.
M32W MMM
0 Partially amputated fingers shall be filed as amputations or nonamputations. As no definite rule may be applied, it is a matter of experience and
judgment as to their preferred classification.
26
CHAPTER 6
LATENT/CHANCE FINGERPRINT IMPRESSIONS
Latent Fingerprints fingerprints found at the crime scene.
Latent Prints are those markings, usually rather indistinct left by oily matters or
perspiration exuded from the fingertips upon any substance, which the fingers may
have touched.
Scene fingerprints are extremely valuable materials for criminal investigation.
It being impressed carelessly and are perishable, it is necessary to thoroughly
observe their impressed condition prior to collecting and then collect them as soon
as possible by selecting a collecting method suitable. In observing the prints, it is
best to observe it OBLIQUELY. In selecting the use of powder, apply the
PRINCIPLE OF CONTRAST, meaning the use of powder that blends with the
background color where the latent prints has been impressed.
I. Causes of the Markings:
1. Ridges or the raised strip of the epidermis
2. Sweat or perspiration
a. Composition of Sweat
98 % - 99% - Sweat gland excreta is a colorless, transparent substance of
neutral or low acidity (PH4-7) known as moisture or water; and
1% - 2% are organic and non-organic matters;
organic matters are salt, calcium, magnesium, etc. while non-organic matters
are urea, lactic acid, albumin, amino acid and others)
Sebaceous Excreta is a colorless, transparent substance consisting of fatty acids,
vitamins, etc. Quality and quantity of excreta vary from person to person.
Query:
How are latent prints developed?
Ans.:
The finger surface is always wet with excreta from sweat glands
distributed on ridges and fat, which is continuously excreted from the skin, and is
stuck with excreta from the sebaceous glands caused by contact with other skin. If
such a wet finger touches an object, its excreta would move onto the object to
impress a fingerprint. Since the transfer of excreta onto an object impresses latent
prints, they are more easily impressed on a well-dried object with smooth surface.
II. Life span is influenced by:
Climate/temperature/humidity
Physical and mental condition of the subject
Nutrition or the kind of food the body eat
Impurities on the skin surface
27
General View
Distance shot and close-up shot of latent print
Photographs of every object bearing latent prints
Photographs of every latent print before lifting
28
Ken-saku is the method of searching activities for finding scene
fingerprints and where they are impressed.
Most scene fingerprints are usually found at the points of Entry, departure
and places ransacked/attacked.
i. Do not remove object from their original position or touch anything
unless fingerprints are developed and lifted
ii. Search for latent print should be in a systematic and intelligent
manner
iii. Consider the points of entry, attack and exit
iv. Use correct amount and quality of powder to develop latent print
c. Evidence preservation of scene fingerprints
i. Whenever scene prints have been found, confirmation by a
witness shall be made prior to collection.
ii. Photograph the prints prior to collection in order to clarify the
position of an object and the latent prints,
-
1) Name of incident
2) Date and hour taken
3) Place
4) Witness/es and signature/s
5) Collectors affiliation and name
-
29
thereafter lightly sweep excess powder to clean it; applied to dry, slippery
and sticky surfaces.
b) Use of spray gun when prints are found on large object, large
space, wide area. Ex. Leather, synthetic, etc.
c) Rolling (rocking) method place appropriate quantity of powder
on an object to be examined, lightly bend and tilt, spreading out powder all
over the object in order that the powder shall adhere to the fingerprints, the
fingerprint is developed by flipping the back side of the object to remove
excess powder. Applied to high quality dried paper.
d) Light-striking method or Patting Method after having the
powder adhere to a fingerprint, lightly strike the object to be examined with a
brush tip to which the powder has been applied, the fingerprint is developed
with another brush to which no powder is applied or by air blowing with a
blower-brush or a spray to remove excess powder.
e) Sprinkling Method white powder applied on rubber, leather,
greasy fingerprint.
Major Powder material and applicable evidence:
Applicable Evidence
Cautions of Handling
Pottery/ceramics
(containers,
ornament, tiles, etc.)
Metallic
items
(knives,
metallic
paints,
stainless,
etc.)
Extremely
strong
adhesive powder. Apply
little by little. Do not use
too much
Apply little by little only.
Not to use to much
carelessly
Mixture of the black
(carbon
powder,
aluminum powder and
lycopodium
powder
carefully differentiates
color depend upon the
color of the suspected
objects.
Black Powder
Brushing
Method
In
higher
moisture
contains in the air (rain
season) time, misture
ration is change from
7:3 into 6:4 or 5:5 by
adjusting
to
the
situations.
* This method has a
wider application field
by pattern.
Black powder is light
and easily scattering
around
that
easily
30
adheres
on
the
suspected
objects/evidence on the
surface.
Carefully
handle and do not fly
away around.
Rolling
or * Do not use brush due
Spray Method
to
weak
adhesive
powder.
* Fingerprint on the
leather
should
be
photographed
to
preserved or to record.
Do not use scoth tape
or transplant method.
Fingerprint
becomes
inaccurate.
31
1) Metal
2) Plastics/synthetics resin
3) Painted Wood
4) Leather products
5) Adhesive tape (adherence surface side, not the sticky side)
6) Glossy paper
7) Plywood
8) Skin of the human body
Methods
1) Cyano Gas Treatment Method
a. Few drops of Cyanoacrelate mighty bond drop on the gauze/cotton cut into 4 -5
cm.
b. Place into the container with cover, like plastic bag with closed mouth fix its
position, not to get in touch to subject/ object.
c. Wait for 15 20 minutes while observing fingerprint exposure condition.
Reaction to moisture in the fingerprint, crystals in white color fingerprint can be
observed with the naked eye.
d. In this case, cotton and gauze, paper with the cyanoacrelate Mighty Bond is put
on to consist amount of water so the reaction will be agitated.
e. Take photograph as the fingerprint is formed into a white color.
2) Cyanoacrelate Adherence Method
a. White paper (nature of this paper is no absorbent, prevent cyano acrelito
bond not to be absorbed), cut it into the suspected substance (fingerprint) size. Drop
few drops (1-3 drops = 0.1 0.3 g) of cyano bond.
b. Leave the paper for 2 3 seconds and shake lightly and make it in semi dried
condition.
c. Place this semi dried Cyano bond applied paper on the suspected substance
(fingerprint) area with the applied side on the substance and cover it with plastic to
prevent evaporation of the gas contents.
d. With 10 20 minutes, fingerprint will expose in white color.
e. Take a photo record of the detected fingerprint.
3) Fuming Box Method Structure of fuming box and logic of this method
a. Metal Box 40 x 40 x 50 cm size developed for this purposes of fingerprint
sampling by Cyanoacrelate Method. Bottom part consists of a round .05 of hot plate.
Heat of this hot plate agitates the evaporation condition of Cyanoacrelate group of
bond glue and shortens time detection. Sidewall has 5 x 5 cm size window.
b. Switch on to heat up the hot plate
c. Open the cover of the fuming box and place the suspected object/evidence in
convection current all over the box. If No result is noted.
d. Put few drops of Cyanoacrelate mighty bond on the hot plate
e. Put fingerprint on the transparent plastic sheet cover window of the fuming box.
With the plastic bag fix the sheet with the magnet, while exposing fingerprint in the
inner side of the Cyanoacrelate gas. Through the window, you can monitor the
formation of the fingerprint.
f. Put the cover and wait for 7 8 minutes.
g. While waiting for the processing, you can attend to other sample mention on
letter e. Over doing the processing is the cause of destruction. Protuberant line
32
might be corrupt. Carefully observe the fingerprint on the window and decide when
to finish the processing of the fingerprint inside the fuming box.
h. Take photo record.
C. Ninhydrin Method There are two solutions of the ninhydrin powder,
namely: ninhydrin petroleum benzine and ninhydrin acetone solution. This is applied
by soaking a brush into the solution, and then applies on the paper in a single stroke
until the entire suspected portion containing latent prints is covered. At normal
atmospheric temperature, the latent print is observed after 24 hours of application.
To confirm the print in a short time the use of a flat iron may be used. Dry the paper
using a portable ninhydrin heater, if none, just let it dry.
* The application of the solution will have a chemical reaction between the amino
acid and ninhydorine that will change the color into bluish purple.
Ninhydrine Acetone solution:
a. Applicable to
1) Paper
2) White wood
3) Blood stained fingerprint
4) Paper wrapping of cigarette-stick, etc.
b. How to make solution (in case of 100cc of 0.5% solution making)
> To make 0.5% Ninhydrine Acetone solution, by 0.5g of Ninhydrine powder
dissolved into 100ml of Acetone.
c. Detection Method
1) Dip brush into reagent, apply on the suspected surface evenly
2) Evaporate acetone with heat
3)Take a photo of the developed fingerprint
d. Restoration
1) Wash it in hot water, for easy removal of the chemical
2) Dip the whole item into the 3% solution of the Hydrogen Peroxide (H2O2)
Ninhydrin Petroleum Benzine Solution
a. Applicable to
1) Paper printed/written (advantage of this method is written letters with ball
pen and other ink on the paper are not destroyed.)
b. How to make (in case 100cc of 0.5% solution)
1) 0.5 of Ninhydrine powder is dissolved into 10ml of Ethel Alcohol. Ninhydrin
powder cannot be dissolved into the petroleum benzene, directly. Dissolve it into
Ethyl alcohol first, then in to benzene.
2) Add 90ml of petroleum benzene, and mix up well to make 0.5% Ninhydrine
petroleum benzene solution.
c. Method
33
1) Dip brush into solution and apply on the suspected surface evenly
2) Evaporate petroleum Benzine and add heat
3) Take a photo of the detected fingerprint.
D. Ninhydrin and Zinc chloride solutions this is one of the least
expensive and easiest to use in developing latent prints on paper documents.
Formula 1: Mix 20 grams of ninhydrin crystals with 3,300 cc of acetone
Formula 2: Using a magnetic stirrer, dissolve 5 gms of ninhydrin crystals in 30 ml
of methanol. Add 40 ml of two (2) propanol then stir. Add 930 ml of petroleum or
pentane then stir.
E. SPWA (Special Method)
1) Applicable to
a. Wet (watered)
> Plastic bag
> Metal product
> Plastic product
> Vehicle body
> Bathroom tile
> Weekly magazine cover
> Glass product
> Smooth surface with no water absorbent
b. Adherent surface of the adhesive tape
c. Magnetic Card
d. Crappy plastic bag
2) How to make a reagent liquid
a. Bring 3g of SP Black powder in the mortar, to make it into even
sizes.
b. Add 3 ml of drew prevention chemical for photo (Konica
duxs/Drywell) and mix well, then add 10ml of water and mix again.
3) Detection Technique
a. Dip brush in the reagent, cover object/evidence with this solution
well and leave it for 30 second.
b. Wash away excess powder while confirming detection (exposure)
condition. Repeat the same application again when the detected fingerprint is not
clear enough.
c. After it has dried well, no moisture contains, transfer chemically and
take photo. Not transferable from the adhesive tape, photo record is
recommendable.
F. Tetramethybenzidine Benzidine (C16 H20 N2) or TMB Method
Applying chemical reaction to certain enzyme in the blood. React to the TMB and
turn into blue green color. (1/20,000 solution contains of the blood can be sensed by
this method). With this method the invisible amount of blood stained fingerprint can
be detected. Fingerprint on the kitchen knife, and other blades used as a weapon,
are effectively detected.
34
Formula:
Solution A - 100 ml Ethanol consist if 0.5ml of TMB powder solution.
Solution B Ethanol added to the same amount of distilled water, and 30 %
hydrogen peroxide mixed up in 9:1 ratio.
Detection Technique:
a. Before starting working on the suspected area, take photo record (original
appearance)
b. Apply solution A with a brush, then solution B after its dry.
c. If there is an existing blood stained fingerprint, it will turn into blue green. Take a
photo record of the fingerprint.
Preservation of the solution
It will last only for one (1) month under the direct exposure to sun and above 60
degrees centigrade of the climate. But if it is preserved at the temperature of 12 to
20 degrees centigrade it will last at least five (5) months with out any influence
weather condition. Further in dark places, after 15 months no changes will be
observed. Remarks : confirm the effectivity of the solution always, before using it.
Fingerprint Detection technique by the TMB from (human) skin
Apply gelatin paper/scoth tape on the suspected area that the bloody fingerprint
might be existing, and transfer the subject fingerprint on the gelatin paper. Apply the
solution
A on the surface (gelatin paper) then another close to the paper of which is
absorbed solution B with blood stained fingerprint transferred, gelatin coated side.
It will turn into blue green color if actual fingerprint exist.
G. Gentian Violet (crystal violet) used to develop prints on adhesives.
This solution is useful on all types of rubberlike adhesive tapes, but not on watersoluble tapes.
Formula:
ml
of distilled water.
35
36
b. Collecting Methods to visible type of latent prints
1) Dust Fingerprint lifted directly with gelatin paper
but if it may peel it off use photograph;
2) Blood Fingerprint lifted directly with gelatin paper
3) Oil/grease fingerprint If dry, it is collected by lifting it onto
Binio roll lifter.
If not dry, dry it under a shade then collect it as in the
above case.
37
MULTIPLE CHOICES: Encircle the letter of the correct answer. Strictly no erasures
01. A handprint found at the crime scene maybe identified by scientific examination
is known as
a. Dactyloscopy
b. Palmistry
c. Spectro-analysis
d. Dactylography
e. Micro - analysis
02. Dactyloscopy, the science of fingerprint identification was first used by law
enforcement in 1886. Which of these countries was the first to adopt this system of
identification?
a. USA
b. France
c. Argentina
d. Japan
03. The most likely place to look for fingerprints of the thief in an automobile, which
has been stolen and abandoned is on the
a. Door handles
b. Steering wheel
c. Gear Shift knob
d. Rearview Mirror
e. Dash Board
04. The length of time an undeveloped fingerprint will remain on an object depends
most on the
a. Side at which the person touched the object
b. Physical state of the person leaving the fingerprint
c. Specific density of the object
d. Color of the object
e. Porosity of the object
05. Are means of personal identification; they aid the investigator in identifying
persons in custody; when found at a crime scene, they lead the investigator to the
perpetrator.
a. Fingerprints
c. Trading Evidence
b. Circumstantial evidence
d. Motive and Intent
06. The technique of fingerprinting is called.
a. Dactyloscopy
b. Poroscopy c. Palmistry
d. Latent Print
07. Practically all fingerprint experts believe that fingerprint patterns are:
a. Inherited as Mendelian characteristics
b. Never inherited
c. Always inherited
d. Wash his both hands before taking prints
09. In the development of impressions, the fingerprint powder should be applied as
soon as the ridges become visible
a. In the interspaces
b. In the direction of the ridge trend
c. Across the ridge
d. Uniformly cover the center of the print
10. The following types of fingerprint registration
a. The 10-print or principal registration and the single print registration
b. Whole print with classification
c. Impression of the 10 fingers
d. All of the foregoing
11. It has long been a rule that is required for minimum identical and characteristic
details must be found to justify the conclusion of identity between two points
a. Ten (10) b. Twelve (12)
c. Fifteen (15)
d. Sixteen (16)
38
12. It is a triangular shaped detail of the pattern formed by the bifurcation of forking
of a ridge at the outer portion of the pattern, and it determines the other boundary of
the pattern as it flows around the pattern.
a. Delta
b. Core
c. Ending Ridge
d. Appendage
13. Are those fingerprints left at the crime scene; and it is either imprints or
impressions
a. Oily matters
b. Latent prints
c. Accidental prints d. Greasy prints
14. Is that center of the fingerprint; it may be ridge resemblance a loop, a rod, or a
spiral in the very center of the pattern
a. Core
b. Delta
c. Ridge
d. Imaginary line
15. Is a kind of fingerprint in which one or more ridges enter on either side of the
impression by a recurve, pass out to terminate on the same side as the ridge or
ridges entered
a. Loop
b. Whorls
c. Arches
d. Recurving Ridges
16. Of the following fingerprint patterns, one in which the downward slant of the ridge
or ridges is from the thumb toward the little finger or ulna bone
a. Loop
b. Ulnar Loop
c. Ulnar Loop
d. Central Pocket Loop
17. A fingerprint pattern in which the downward slant or ridge or ridges from the little
finger toward the radius bone
a. Radial Loop
b. Loop
c. Ulnar Loop
d. Central Pocket Loop
18. A fingerprint pattern in which the ridges flow from circle to the other without
recurving, usually having a slight upward curve in the center, giving the appearance
of an arch
a. Plain
Arch
b. Ulnar Loop
c. Radial Loop
d.
Tented Arch
19. A fingerprint pattern in which the ridges flow from circle to the other without
recurving but differ from plain arches, as the ridges rise in the center giving the
pattern the appearance of tent is
a. Whorl
b. Tented Arch
c. Plain Loop d. Radial Loop
20. A fingerprint pattern in which the ridges form a series of circles or spirals
around \d the core axes
a. Tented Arch
b. Whorls
c. Central Pocket Loop
d. Double Loop
21. Are those patterns in which most of the ridges represent the pattern known as
loop, but when one or more ridges within such loop or those surrounding the core
recurve down through its axis, thereby forming the second delta
a. Central Pocket Loop
b. Whorls
c. Double Loop d. Accidental Whorl
22. Is a kind of fingerprint pattern consisting of two separate loop formation, with two
separate and distinct sets of shoulders and two deltas
a. Accidental Whorl
c. Central Pocket Loop
b. Double Loop
d. Whorl
23. Is a kind of fingerprint pattern in which two of the different types of patters are
represented except the plain loop
a. Double Loop
b. Accidental Whorl
c. Central Pocket Loop
d. Plain Whorl
39
24. A German criminologist who had thoroughly studied the history of fingerprints in
the Far East and found that fingerprinting were already commonly used for
identification purposed during the Tang Dynasty from 618 to 906AD
a. Robert Heindle
c. Prof. Johannes Hames Herschel
b. Henry Faulds
d. Dr. Nehemiah Greu
25. A British Scientist and a cousin of Scientist Charles Darwin, who devoted himself
to the study of fingerprints, and who established his own system in England
a.
Alphonse Bertillon
b.
Samuel Clemens
c. Sir Francis Galton
d. Robert Heindle
26. An American who used his own fingerprint on commissary orders in New Mexico
in order to prevent forgery, and was the first authenticated record of official use of
fingerprints in the United States.
a. Mr. Gilbert Thompson
c. Alphonse Bertillon
b. Samuel Clemens
d. Robert Heindle
27. Known for his anthropometrics measurement, and who was the first to propose
his system in the year 1879, and was the first Chief of the Identification Bureau of
the Paris, France, Criminal Police
a. Mr. Gilbert Thompson
c. Samuel Clemens
b. Alphonse Bertillon
d. Sir Francis Galton
28. Known as the Father of Fingerprints who has Herschels successor in India
who developed a fingerprint classification; was adopted in Scotland Yard, London
a. Alphonse Bertillon
c. Juan Vucetich
b. Sir Edward Richard Henry
d. Dr. Henry P. de Forest
29. The first leading judicial decision I the Philippines Jurisprudence on the science
of fingerprinting
a. PP vs. Medina, 59 Phil. 330
b. PP vs. Pacana, 47 Phil. 48
c. US vs. Asensi, 34 Phil. 48
d. PP vs. Pnfereda, at al. 54 Phil. 68
30. The first Filipino authority on fingerprinting, and who topped the first examination
in fingerprints in 1937 which was given by Capt. Thomas Dugon of New York Police
Department
a. Col. Jose Lukban
c. Atty. Lorenxo Sunico
b. Atty. Agustin Patricio
d. Gen. Rafael Crame
31. The easiest way to discover latent impressions is to view the area
a. Directly
c. At a distance of about one-half inch
b. Obliquely
d. All of the foregoing
32. To aid in identifying the subject, when seeking information from the Immigration
Commission regarding an alien , it is most important to provide that agency with data
regarding the
a. Port of entry of the alien
b. Residence of the alien
c. Occupation of the alien
d. Educational background
33. The body of a man is found in a river. The body is fully clothed but badly
mutilated, water clogged and swollen. The clothing contains no identifying papers.
One of the following means of identification of the body that is least reliable is
a. Scars of the body
b. Measurements of the body
40
c. Tattoo marks of the body
d. Fingerprints
41
a. Papillary Ridges b. Friction Ridges
c. Ridges
45. The most positive means of human identification as well as the cheapest and
most practical method is
a. Palmistry
b. Odontology
c. Fingerprinting
d. DNA
46. One of the methods in producing real impressions is
a. Fingerprinting
c. Plain impressions
b. Powder Development
d. Mechanical Method
47. The following are methods of recording fingerprint
a. Slab or Roller Method
c. Printmatic Method
b. Porelon Method
d. All of the above
48. One of the most basic requirements in taking legible fingerprints is
a. Always relax the hand of the subject
b. Cleanliness of the equipment
c. Insure that the ink is spread wisely
d. All of the above
49. It used to lift print from the skin surface by placing the card over the skin in the
suspected area and applying pressure for about 3 seconds is
a. Molding Card
b. Kromekote Card c. Fingerprint Card d. Bonlio Card
50. That type of pattern in which there are two loops surrounding or overlapping the
other in which the core ridges have their axis on the same sides of the pattern is
called
a. Double Loop
c. Lateral Pocket Loop
e. Central Pocket Loop
b. Twin Loop
d. Accidental Pattern
51. Latent prints are made through
a. Ridge of the skin
c. Ridge formation e. Furrows of the skin
b. Caused by greasy materials
d. Perspiration out of the finger epidermis
52. Is a system by which a particular impression of the ridge is shown to be
exclusively made by a specific individual is
a. Fingerprint Identification
c. Ridge Tracing
e. All of the above
b. Fingerprint Classification
d. Ridge Counting
53. Practically a kind of a Loop pattern with the important exception that the core
ridges of said loop have their axis on opposite sides of the pattern is
a. Double Loop
c. Lateral Pocket Loop
e. Radial Loop
b. Twin Loop
d. Central Pocket Loop
54. A noted British Anthropologist who established the individuality and performance
of fingerprints is
a. Henry Faulds
c. Sir Edward Henry
e. Sir Francis Galton
b. Marcelo Malpigi d. Sir William James Herschel
55. That formula classification that considers the ridge count of the first loop in a set
of patterns except the little fingers is
a. Final Classification
c. Major Classification
e. Key Classification
b. Primary Classification d. Secondary Classification
56. In 1901, for a period of nine (9) yeas, marked the official introduction of
fingerprinting for criminal identification in
42
a. England and Wales
b. USA
c. England
d. Argentina
57. The system of classification that spread and is accepted in almost Spanish
speaking countries and also considered to be among the two most accepted system
is
a. Galton System
c. Vucetich System
e. Sir Henry System
b. Alphonse Bertillon System
d. JCA Mayers System
58. Is that part of our skin intervening between the dermis and the epidermis
immediately underneath the generating layer, which is responsible for the ridge
formation is
a. Sweat Glands
b. Dermal Papillae c. Corneous Layer d. Thick Layer
59. When one digit of the fingerprint is missing, classification of said missing digit will
be
a. Meeting Whorl c. Pattern follows the corresponding digit on the opposite hand
b. Amputated Finger
d. Pattern of the next digit immediately on its side
60. This division in a fingerprint classification derived from patterns, which are
recorded always in capital letters following strictly the identity of such impression is
a. Final Classification
c. Primary Classification e. Secondary
Classification
b. Key Classification
d. Major Classification
61. In developing impression, the powder should be applied _________ as soon as
the ridges becomes visible
a. Uniformly over the center of the print c. Across the ridges
b. In the direction of the ridge trend
d. In the inner space
62. It is an element in the comparison of friction ridges that pertains to the sufficient
number of ridge characteristics is
a. Qualitative Concordance
c. Quantitative Factors
b. General Pattern Agreement
d. Relationship of ridge details
63. The principle involved wherein the developing reagent adhere or stick to the
sweat that are present in the latent print is
a. Solid Method
c. Chemical Method
e. Gas Method
b. Flame Method
d. Fuming Method
64. One of the following is used in taking fingerprints of the deceased is
a. Ante-mortem Fingerprinting
c. Death Fingerprinting
b. Post-mortem Fingerprinting
d. DNA Fingerprinting
65. Minutiae type of prints easily evaporates or are destroyed, the best preservation
method is
a. Lifting Method
c. Molding Method
b. Photograph Method
d. Casting Method
66. What shall be done on fingers, which are mummified or adipocered fingers?
a. Mold with Silicon
b. Photograph it
c. Slowly impress the fingers
d. Study/analyze the ridges and record them
e. All of the above
67. It is an element in the comparison of friction ridges that pertains to the different
ridge characteristics
a. Quantitative Factors
b. Qualitative Concordance
c. General Pattern
Agreement
d. Relationship of Ridge Details e. All of the above
43
68. It is an element in the comparison of friction ridges that pertains to the sufficient
ridge characteristics
a. Quantitative Factors
b. Qualitative Concordance
c. General Pattern
Agreement
d. Relationship of Ridge Details e. All of the above
69. Under the Henry classification systems, it refers to the numerical value of all
whorl patterns in real prints is
a. Key
b. Major
c/ Primary
d. Secondary
70. Suppose the Right finger is a Central Pocket Loop Whorl with a ridge trace of
two (2), the right middle finger has a ridge count of ten (10) and the right ring finger
has a ridge count of 15; on the other hand the Left Index Finger is a Radial with a
ridge count of eight (8), the left middle finger has a ridge count of nine (9), the left
ring finger has a ridge count of three (3). What is now your Secondary and SubSecondary Classifications?
a. W IMO
b. W III
c. C MOO
d. W MMO
R OIO
R OOO
R IIO
U OII
71. Mike Pidal was arrested, when fingerprinted it turned out that all his fingers were
amputated, what would be his fingerprint classification
a. M 32 W MMM
b. 32 W MMM
c. W 32 A AAA
M 32 W MMM
32 W MMM
W 32 A AAA
d. AMP 32 W MMM
AMP 32 W MMM
72. Whenever an island ridge is crossed by an imaginary line in the course of ridge
counting, the rule is it must be counted as
a. One ridge count
b. Two ridges count
c. Three ridges count
d. Four ridges count
e. None of the above
73. Suppose the Right Thumb and the Right Index Finger are Radial Loops, the right
middle and right ring fingers are Plain Arches; on the other hand the Left Thumb and
the Left Index Fingers are Tented Arches while the Left Middle and Ring Fingers are
Ulnar Loops. What is now your Secondary Classification?
a. r R a2
b. r R aa
c. r R a2
d. R a2
2
tTu
t T uu
tT
T u2
74. It portrays the Classification of the little fingers
a. Primary
b. Final
c. Secondary
d. Major
75. The best and simple method to do with the fingers of a dead body that has been
found/retrieved drowned to be able to record his/her fingerprints is
a. Use any of the Post Mortem Methods of Fingerprinting
b. Photograph and analyze it
c. Inject first with water to swell the fingers then proceed fingerprinting
d. Record its appearance only
e. Just forget about it
76. It is the composite of the ridge outlines, which appears on the skin surface of the
bulbs on the inside of the end joints of the fingers and thumb is
a. Fingerprint
b. Papillary
c. Friction Ridges
d. Epidermal ridges
e. All of the above
77. It is a method by which impressions are transformed into a formula in order to
facilitate the filing and searching for them is
44
a. Identification
d. Formulation
b. Examination
e. All of the above
c. Classification
78. Pertains to the 8 types of pattern that appears to be in the same position during
an identification process is
a. Quantitative Factor
b. Qualitative Concordance
c. General Pattern Agreement
d. Relationship of Ridge Details
e. All of the above
79. It means sufficient number of ridge characteristics or details present between the
Questioned and the standard is
a. Quantitative Factor
b. Qualitative Concordance
c. General Pattern Agreement
d. Relationship of Ridge Details
e. All of the above
80. That principle which means that no two fingerprints even twins are exactly alike
a. Principle of Individuality
b. Principle of Permanency
c. Principle of Infallibility
d. Principle of Constancy
e. None of the Above
81. The science that deals with the study of identification and classification using
fingerprints is
a. Photography
b. Dactyloscopy
c. Chiroscopy
d. Pedoscopy
e. Poroscopy
82. That principle which means that Fingerprints are reliable and only the
interpretation can err
a. Principle of Individuality
b. Principle of Permanency
c. Principle of Infallibility
d. Principle of Constancy
e. None of the Above
83. The scientific examination or study of the palm is
a. Polydactylism
b. Dactyloscopy
c. Chiroscopy
d. Pedoscopy
e. Poroscopy
84. The tiny elevated portion or hill like structure found on the epidermis of the
friction skin
a. Ridges
b. Furrows c. Typelines
d. Pattern Area
e. Divergence
85. Within the pattern area of the loops and whorls are the important points for
classification like the core and delta is called
a. Center points
b. Focal points
c. Imaginary Lines
d. Convergence
e. Sufficient recurve
86. The scientific examination of the sweat pores of the friction of the skin is
a. Pedoscopy
b. Dactyloscopy
c. Graphology
d.
Poroscopy
e. None of the above
87. That part of the loop or whorl in which appears the core, deltas a ridges with
which we are concerned in classifying is
a. Type lines
b. Divergence
c. Pattern Area
d. Convergence
e. Imaginary lines
88. Defined as the two innermost lines or ridges which start parallel divergence or
surround or tend to surround the pattern area is
45
a. Type lines
e. Imaginary lines
b. Divergence
c. Pattern Area
d. Convergence
89. The impressions in a pattern area where the ridges enter on one side of the
impressions and exit on the other side with a wave or rise in the center
a. Loops
b. Arches
c. Whorls
d. Ridges
e. All of them
90.That type of pattern in which one or more of the ridges enter on either side of the
impression, recurve or pass an imaginary line drawn from the delta to the core and
terminate or tend to terminate on or toward the same side of the impression from
where such ridge or ridges entered is
a. Loops
b. Arches
c. Whorls
d. Ridges
e. All of them
91. They are markings, usually rather indistinct, left by oily matters or perspiration
exuded from the fingertips upon any substance which the fingers may have touched
a. Fingerprint
b. Chance impressions
c. Latent prints
d. All of the above e. None of the above
92. That principle in developing prints at a crime scene that requires the observance
of color and adherence is
a. Principle of Adherence
b. Principle of Contrast
c. Principle of Constancy
d. Principle of Adaptability
e. All of the above
93. The most satisfactory method of preserving dusted fingerprints is by
a. Dusting
b. Mounting
c. Lifting
d. Developing
e. All of the above
94. The principle involved is that the developing reagents adheres or sticks to the
sweat that are present in the questioned print is
a. Chemical Method
b. Physical or Mechanical Method
c. Fuming Method d. Gas Method
e. All of the above
95. Are those points of details in the formation of the pattern, which are used in
comparing two fingerprints in order to determine the identity of the suspect or
suspects or they are distinguishing features as basis for identification/comparison is
a. Imaginary Lines b. Ridge characteristics
c. Ridges
d. Focal Points
e. All of the above
96. The depressed or canal like portion of an impression
a. Friction Skin
b. Furrows
c. Ridges
d. a & c
e. All of the above
97. It is a definite design formed by the ridges on the inside of the first joint of the
finger or a reproduction of a pattern or design formed by the ridges in the inside of
the first joint of the finger through the medium of sweat, ink, blood or any ingredient
capable of producing visibility.
a. F/P Pattern
b. F/P Area c. F/P Characteristics
d. F/P
Lines
e. All of the above
98. That focal point located at the center or approximately the center of the
divergence is
a. Core
b. Delta
c. Ridges
d. Pattern Area
e. All of the
above
46
99. That focal point located at the center or approximately at the center of the
pattern area is
a. Core
b. Delta
c. Ridges
d. Pattern Area
e. All of the
above
100. These are basic boundaries of fingerprint pattern. They are formed by ridges
which run parallel, then diverge or separate tending to surround the pattern area is
a. Appendage
b. Type lines
c. Diverging ridges d. Pattern Area
e. Converging ridges
101. That part of the finger where fingerprints could be found is
a. Middle Phalange
b. Terminal Phalange
c. Proximate Phalange
d. Base Phalange
e. All of the above
102. The disciple of Jesus Christ believed to have used fingerprint is
a. St. James
b. St. Luke
c. St. Paul
d. St. John
103. The scientist who proved that fingerprints remains permanent/constant and in
fact established the principle of permanency is
a. Charles Darwin
b. Francis Galton
c. JC A Mayer
d. William Herschel
e. Herman Welcker
104. He was the law enforcement officer who installed the fingerprint identification
system in New York State of Prison of Albany is
a. Gilbert Thompson
b. James Parke
c. Hintzo
d. Frederick Kuhne
e. Jackes James
105. The number of ridge requirement that distinguishes Tented Arch from a Loop
impression is
a. At least one count of recurving ridge b. At least two counts of recurving ridges
c. At least three counts of recurving ridges
d. No recurving ridge count
106. A short ridge at the top or summit of a recurve that usually at right angle is
a. Upthrust
b. Appendage
c. Spike
d. Staple
e. Ridge
Hook
107. That period when the ridge characteristics is formed
a. 3 months after birth
b. After birth
c. 1 Year after birth
d. Prior to birth
e. None of the above
108. Objects where chance impressions can be found
a. Porous Objects
b. Non-porous objects
surface
d. Uneven surface
e. All of the above
c. Rough
109. Marcelo Malpihi founded the existence of two (2) parts of the skin, one of them
he named it as the outer scarf or epidermis, this is also known as
a. Stratum Perfume
b. Stratum Corneum
c. Stratum Mucosum
d. Stratum Mutuum
e. None of the above
110. The scientist who recommended the use of fingerprint as a means in the
identification of criminals is
a. Samuel Clemens
b. Henry Forest
c. Gilbert Thompson
d. William Herschel
e. Henry Faulds
47
111. The City if the USA acclaimed to be the first City to use fingerprints for
identification is
a. Chicago
b. Detroit
c. Los Angeles
d. St. Louis
Missouri
112. These scientists argued that there is probability that two (2) persons may have
the same fingerprints
a. Vucetich & Faulds
b. Clemens & Thompson
c. Galton &
Locard
d. Leonard & Witkowsji
e. Mitchelle & Lucille
113. It consists of disconnected sequences of short ridges embodied intensely and
may or may not be considered as ridges except when they appear to be dark and as
thick as the surrounding ridges in a pattern area
a. Incipient ridges
b. Fragmentary ridges
c. Appendage
d. Pucket ridges
e. Incendiary ridges
114. This is a kind of ridge, which is madly formed, thin, short or broken that appear
or appears in the depressions between two (2) well formed ridges
a. Fragmentary ridges
b. Incipient or Nascent ridges
c.
Appendage
d. Bifurcating ridges
e. Recurving ridges
115. As growth ceases at several ends, the end of the ridges curls slightly, this is
termed as
a. Creases
b. Puckering
c. Staple
d. Spike
116. Referred to as the basic boundaries of impressions is
a. Pattern Area
b. Type Lines
c. Basic Lines
Diverging Lines
e. Imaginary Lines
d.
117. The identification process applied to Loop type of patterns done by determining
the number of the intervening ridges from the Delta to the Core is termed as
a. Ridge Tracing
b. Ridge Lining
c. Ridge Counting
d. Classification
e. Following the Ridges
118. That method of print reproduction where the bulb of the phalanges of the fingers
or thumbs are pressed on the surface of a fingerprint card after pressing them on a
plate with printing ink taken simultaneously is
a. Rolled Method
b. Simultaneous Method
c. Plain Method
d. Rough Method
e. Inking Method
119. It has been useful and adequate for receiving the five (5) rolled impressions and
convenient for handling and filing is
a. Card board paper
b. Index Card
c. Fingerprint report
Card
d. Standard Fingerprint Card
e. All of the above
120. In instances where the fingers of a person to be fingerprinted is stiff or with
clenched fist, the best remedy to record the prints is
a. Forget about it
b. Just make a specific report about it
c. Cut the fingers and impressed it
d. Use any methods of Post-Mortem
Fingerprinting
121. If the fingers to be fingerprinted is feared to disintegrate by even the slightest
touch, the best method to be done is
48
a. Slowly & carefully impress the fingers b. Record its condition & appearance
c. Study, record & photograph the ridges d. Use molding method
122. That identification process applied to whorl types of pattern by continuously
following the ridges emanating from the lower side of the left delta as it flows
towards the right delta is
a. Ridge Tracing
b. Ridge Lining
c. Ridge Counting
d. Classification
e. Following the Ridges
123. Known method of recording fingerprints
a. Slab and Rolled Method
b. Porelon Pad Method
d. Post-mortem Method
e. All of the above
c. Printmatic Method
124. The reason why the use of fountain pen ink, colored inks and stamp pad inks
are objectionable in developing real/true prints or impressions is
a. They are too thin and dry quickly
b. Smears easily and produce weave
c. Unsatisfactory for comparison
d. It can cause impression of dirt
e. All of the above
125. Impressions, which are visible grossly but made visible prints by the additional
of some substance are called
a. Plastic Impressions
b. Visible prints
c. Latent Prints
d. Semi-visible prints
e. All of the above
126. This method is effective for developing latent prints found on objects such as
papers, wood, or metal. It is best use in collecting visible prints like blood
impressions
a. Brushing Method
b. Chemical Method
c. Liquid Method
d. Powder Method
e. Solid Method
127. That method where a latent print after being processed and developed is
directly lifted through a lifting material after proper photographs and markings has
been done is
a. Pulling Method
b. Pressing Method
c. Lifting Method
d. Stretching Method
e. All of the above
128. This method of developing or identifying prints done by producing soot as a
means to develop latent or unclear fingerprints is
a. Solid Method
b. Chemical Method
c. Flame Method
d. Molding Method
e. Powder Method
129. That material useful in collecting dust latent print is
a. Melting Paper
b. Gellatin Paper
c. Adhesive Paper
d. Sand Paper
e. Molding Paper
130.Latent prints found, developed and processed at the crime scene is best
preserved by
a. Use of photographs
b. Using plastic prints
c. Use of
fingerprint lifters
d. Photographs and related markings
e. All of the above
131. The least significance in preserving latent prints evidence is
a. Preserve its condition upon search
b. Maintain its symbolic value
c. Preserve its natural appearance when found
d. Maintain its relevancy & positions in relation to other evidence
e. None of the above
49
132. It is an element required in the comparison of friction ridges that pertains to the
eight (8) types of pattern is
a. Qualitative Concordance
b. Relationship of Ridge Details
c. Quantitative Factors
d. General Pattern Agreement
133. The most important rule that applies to all articles examined for prints by
inexperienced person or investigator is
a. Touch a smooth surface only with gloves
b. Do not touch any smooth surface
c. Do not touch a rough surface
d. Touch a rough surface only with gloves
e. All of the above
134. The best among the liquid or chemical methods of developing latent prints
believed to be on paper documents
a. Lighting/Fuming Method
b. TMB Method
c. Ninhydrin Method
d. Special of SPWA Method
e. Crystal Violet Method
135. Normally fingers are composed of ten, when a duly formed finger is developed
it is recorded as
a. Eleventh finger
b. Extra finger
c. Forget about it
d. Photograph & record it e. All of the above
Compiled by:
Reyvo P. Sannad
Dean College of Criminology
50
26. a
27. b
28. b
29. a
30. b
31. b
32. a
33. b
34. a
35. b
36. b
37. a
38. b
39. c
40. c
41. c
42. b
43. d
44. d
45. c
46. a
47. d
48. d
49. b
50. c
51. d
52. a
53. b
54. e
55. e
56. a
57. c
58. b
59. c
60. c
61. b
62. c
63. a
64. b
65. b
66. a
67. b
68. a
69. c
70. c
71. a
72. b
73. c
74. b
75. c
76. e
77. c
78. c
79. a
80. a
81. b
82. c
83. c
84. a
85. b
86. d
87. c
88. a
89. b
90. a
91. d
92. b
93. c
94. b
95. b
96. b
97. a
98. b
99. a
100. b
101. b
102. c
103. e
104. b
105. a
106. b
107. d
108. b
109. b
110. e
111. d
112. c
113. b
114. b
115. b
116. b
117. c
118. c
119. d
120. d
121. c
122. a
123. e
124. b
125. c
126. b&c
127. c
128. a
129. b
130. e
131. b
132. d
133. b
134. c
135. b