Professional Documents
Culture Documents
Craftsman 917257720
Craftsman 917257720
917.257720
OWNER'SMANUAL
Assembly
Operation
Customer Responsibilities
Service and Adjustments
Repair Parts
CAUTION:
Read
and follow
all safety
before
operating
this equipment,
SAFETY
Practices RULES
for Ride-On
Safe Operation
Mowers
IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OFAMPUTATING HANDSAND FEETAND THROWING OBJECTS.
FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
L
GENERAL
*
,
-
OPERATION
o
o
IL
t11. CHILDREN
Before and when backing, look behind and down for small
children.
IV. SERVICE
-
SLOPE OPERATION
DO:
,
,
.
,
CAUTION:
Always disconnect
spark
plug wire and place wire where it cannot
contact spark plug in order to prevent
accidental
starting when setting up,
transporting,
adjusting
or making
repairs,
2
Downloaded from www.Manualslib.com manuals search engine
Use extra care in handling gasoline and other fuels. They are
flammable and vapors are explosive.
Use only an approved container.
Never remove gas cap or add fuel with the engine
running. Allow engine to cool before refueling. Do not
smoke.
Never refuel the machine indoors.
Never store the machine or fuel container inside where
there is an open flame, such as a water heater.
Never run a machine inside a closed area.
DO NOT:
Keep children out ofthe mowing area and under the watchful
care of another responsible adult.
Be alert and turn machine off if children enter the area.
PRODUCT
CONGRATULATIONS
on your purchase of a Sears
Tractor. It has been designed, engineered and manufactured to give you the best possible dependability and
performance.
Should you experience any problem you cannot easily
remedy, please contact your nearest Sears Authorized
Service Center/Department.
We have competent, welltrained technicians and the proper tools to service or repair
this unit.
Please read and retain this manual. The instructions will
enable you to assemble and maintain your unit properly.
Always observe the "SAFETY RULES".
MODEL
NUMBER
917.257720
SPECIFICATIONS
HORSEPOWER:
18.0
GASOM NE CAPACITY
AND TYPE:
3,5 GALLONS
UNLEADED REGULAR
OILCAPACITY:
W/FILTER:
W/O FILTER:
SPARK PLUG:
(GAP: .025")
CHAMPION
RV17YC
VALVE CLEARANCE:
INTAKE:
EXHAUST:
.003" - .006"
.016" - .019"
Forward
1st
2nd
3rd
Reverse
TRANSAXLE OIL
CAPACITY AND TYPE:
4 QUARTS
SAE 30 API-SG
TIRE PRESSURE:
FRONT:
REAR:
CHARGING SYSTEM:
SERIAL
NUMBER
DATEOFPURCHASE
THE MODELANDSERIALNUMBERS
ON A PLATE UNDER THE SEAT.
WILL BE FOUND
MAINTENANCE
AGREEMENT
A Sears Maintenance
Agreement
uct. Contact your nearest Sears
CUSTOMER
the safety
rules.
in maintaining,
Ht
1.8
3.4
5.6
2.2
14PSI
10 PSI
L.O
0.8
1.4
2.4
0.9
WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered
or grass-covered
land unless the engine's exhaust system is equipped with
a spark arrester meeting applicable local or state laws (if
any). If a spark arrester is used, it should be maintained in
effective working order by the operator.
RESPONSNBILmTIES
4.0 PINTS
3.5 PINTS
ON ELECTRIC
For two (2) years from the date of purchase, if this riding equipment is maintained, lubricated and tuned up according to the
instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to be defective in material or
workmanship.
This Warranty does not cover:
o
o
o
Expendable items which become worn during normal use, such as blades, spark plugs, air cleaners and belts.
Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass.
Repairs necessary because of operator abuse, negligence, improper storage or accident or the failure to maintain the
equipment according to the instructions contained in the owner's manual:
Riding equipment used for commercial or rental purposes.
ON BATTERY
For ninety (90) days from date of purchase, if any battery included with this riding equipment proves defective in material or
workmanship and our testing determines the battery will not hold a charge, Sears will replace the battery at no charge.
WARRANTY SERVICE
CENTER/DEPARTMENT
tS AVAILABLE BY RETURNING
IN THE UNITED STATES.
THE RIDING
EQUIPMENT
TO THE NEAREST
SEARS SERVICE
This Warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
SEARS,
ROEBUCK
3
Downloaded from www.Manualslib.com manuals search engine
ESTATES,
ILLINOIS
60179
TA
SAFETY
RULES
PRODUCT
LE OF CON
............................................................
SPECIFICATIONS
.......................................
CUSTOMER
RESPONSIBILITIES
.....................
3, 15-18
WAR RANTY ...................................................................
3
TRACTOR
ACCESSORIES
...........................
................ 5
ASSEMBLY
..............................................................
7-10
OPERATION
...........................................................
11-14
INDEX
A
Accessories
...........................................
TS
Adjustments:
Brake ............................................
21
Carburetor ....................................
25
Clutch Pulley ................................ 21
Gauge Wheels .............................
13
Mower
Front-To-Back ........................ 20
Side-To-Side ........................... 19
Throttle Control Cable .................. 25
Air Filter, Engine ..................................
18
Air Screen. Engine ............................... 18
Assembly ..........................................
7-10
Electrical:
Interlocks and Relays ................... 22
Schematic ..................................... 30
Wiring Diagram ............................. 32
Engine:
Air Filter ........................................
18
Air Screen ..................................... 18
Cooling Fins ................................. 18
Oil Change ...................................
17
Oil Level .......................................
17
Oil Type ..................................
13,17
Preparation ...................................
13
Repair Parts ............................ 48-57
Starting .................................... 13.14
Storage .........................................
26
Operation ........................................
11-14
Operating Mower ................................. 13
Options:
Accessories .................................... 5
Spark Arrester ........................... 3,38
P
Parking Brake ................................. 11-12
Parts Bag ...............................................
6
Parts, Replacement/Repair
............ 31-47
Product Specifications ........................... 3
R
Repair Parts ...................................
3! -47
B
Battery:
Charging .........................................
8
Cleaning .......................................
16
Installation ....................................
10
Levels ........................................
8.16
Preparation .....................................
8
Starting with Weak Battery ........... 21
Storage .........................................
24
Terminals ......................................
17
Belt:
Motion Drive
Removal/Replacement
............ 22
Mower Drive
Removal/Replacement
............ 20
Mower Blade Drive
Removal/Replacement
............ 21
Blade:
Sharpening ...................................
16
Replacement ................................ 16
Brake Adjustment ................................ 21
26
14
22
Headlights ............................................
24
Hood Removal/Installation ................... 24
L
Leveling Mower Deck ..........................
19
Lubrication:
Chart .............................................
Engine ..........................................
15
16
M
25
21
11
18
18
18
C
Carburetor Adjustment .......................
Clutch Pulley ........................................
Controls. Tractor ..................................
F
Filter:
Air Filter ........................................
Fuel ..............................................
Oil .................................................
Fuel:
Storage .........................................
Type .............................................
Fuse ....................................................
12
Maintenance
Schedule ........................
Mower:
Adjustment, Front-to-Back ............
Adjustment, Side-to-Side ..............
lade Replacement ......................
Blade Sharpening .........................
Cutting Height ...............................
Installation ....................................
Operation ......................................
Removal .......................................
19
19
16
16
12
19
13
19
O
Oil:
Cold Weather Conditions ........ 13.17
Engine ..........................................
17
Storage ......................................... 26
4
Downloaded from www.Manualslib.com manuals search engine
15
2
8
T
Throttle Control Cable Adjustment ...... 25
Tires .............................................
8.15.21
Troubleshooting Chart ................... 28-29
Transax_e ...................................
16.46-47
W
Warranty ................................................
WiringDiagram
....................................
Wiring Schematic .................................
3
32
30
and attachments
can order these
were available through most Sears retail outlets and service centers
items for you when you provide the model number of your tractor.
was purchased.
MAINTENANCE
ENGINE
SPARK
ENTS
PLUG
GAS CAN
FUEL STABiLiZER
BLADES
BELTS
PERFORMANCE
Sears offers a wide variety of attachments that fit your tractor.
you. This list was current at the time of publication; however,
may be made in these attachments, or some may no longer
accessories
and attachments
that are available for your
Most of these attachments
attaching and detaching.
Many of these are listed below with brief explanations of how they can help
it may change in future years - more attachments may be added, changes
be available or fit your model. Contact your nearest Sears store for the
tractor.
protects
OHL DRAIN
VALVE
makes
oil changes
SPREADER/SEEDERS
make seeding, fertilizing, and weed killing
easy. Broadcast spreaders are also useful for granular de-icers and
sand.
SWEEPERS
easier, faster.
MULCH RAKE/DETHATCHER
loosens soil and flips thatch and
matted leaves to lawn surface for easy pickup. Twenty spring tine
teeth. Useful to prepare bare areas for seeding. Available for front or
rear mounting.
HiGH PERFORMANCE
REEL=ACTION
SPRING
TINE DETHATCHER
covers 36-inch wide path and tosses thatch into
large hopper. Mounts behind tractor.
and leaves.
extra-large
cross links
TRACTOR CAB has heavy duty vinyl fabric over tubular steel frame,
ABS plastic top; clear plastic windshield offers 360 degree visibility.
Hinged metal doors with catch.
Keeps operator warm and dry.
Remove vinyl sides and windshields
for use as sun protector in
summer,
OptionaJ
accessories
incUude:
tinted/tempered
solid
safety glass windshield
with hand operated wiper; 12-volt amber
caution light for mounting on cab top.
from a
5
Downloaded from www.Manualslib.com manuals search engine
grass clippings
PLOW turns soil 6 inches deep, cuts 10-inch furrow. Crank adjustment controls depth, 3-position yoke sets width. Heavy steel lands!de
for straight furrowing.
(Requires sleeve hitch.)
tractor
deck to reduce
SPRAYERS
use 12wott DC electric motor that connects to the tractor
battery or other 12wolt source.
Includes
booms for automatic
spraying and hand held wand for spot spraying. Wand has adjustable
spray pattern. For applying herbicides, insecticides,
fungicides and
liquid fertilizers.
lift system.
SNOWTHROWER
has 42-inch swath.
Drum-type auger handles
powdery and wet/heavy snow. Mounts easily with simple pin arrangement. Discharge chute adjusts from tractor seat. 6qnch diameter
spout discharges snow 10 to 50 feet. Lift controlled at tractor seat.
(Use with chains and wheel weights and/or rear drawbar weight.)
CORING AERATOR
takes small plugs out of soil to allow moisture
and nutrients to reach grass roots. 36-inch swath. 24 hardened steel
coring tips. 150 lb. capacity weight tray.
EASY
SLEEVE
CULTWATOR
is 43 inches wide. Prepares
ground for
seeding, helps weed control. Steel frame holds 5 adjustable sweeps.
Adjusts vertically, horizontally.
(Requires
sleeve hitch.)
Optional
accessory:
steel furrow opener for wider openings for potatoes,
corn, and other deep-seeded
crops.
CARTS make hauling easy. Variety of sizes available, plus accessories such as side panel kits, toot caddy, cart cover, protective mat and
dolly.
needed traction
for snow
CONTENTS
Parts Bag contents
,OF
E PACK
.........
.....
.-
in carton
Seat
(1) Shoulder Bolt 5/16-18
Battery acid
(1) Knob
Battery
Steering Wheel
(1) Washer
I 1
Double Loop
etainer Springs
Owner's Manual
Parts Bag
not shown
full size
(2)
(2) Shoulder
_t
Bolts
Link Assemblies
Steering
Sleeve
Terminal Guard
(2) Washers
(2) Keys
/
1/4-20
15 Slope Sheet
......
6
Downloaded from www.Manualslib.com manuals search engine
Battery Caps
and Instructions
BLY
Your newtractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes,
To ensure safe and proper operation of your tractor all parts and hardware you assemble must be tightened securely. Use
the correct tools as necessary to insure proper tightness,
TOOLS REQUIRED
FOR ASSEMBLY
STEERING
WHEEL iNSERT
Utility knife
_jHEX
LOCK WASHER
,_!;,_//
TO REMOVE TRACTOR
UNPACK
STEERING
WHEEL
FROM CARTON
CARTON
STEERING
SHAFT
STEERING
SLEEVE
STEERING
WHEEL
(See Fig. 1)
FIG. 1
Remove protective
plastic from tractor hood and grill.
IMPORTANT:
CHECK FOR AND REMOVE ANY STAPLES
IN SKID THAT MAY PUNCTURE TIRES WHERE TRACTOR
IS TO ROLL OFF SKID.
TO ROLL TRACTOR
Raise attachment
7
Downloaded from www.Manualslib.com manuals search engine
BOLT
LARGE FLAT
WASHER
ASSEM
HOW TO SET UP YOUR TRACTOR
PREPARE
BATTERY
CAUTION:
LY
INSTALL
(See Fig, 2)
Assemble adjustment
Do not tighten.
Your tractor has a battery charging system which is sufficient for normal use. However, periodic charging of the
battery with an automotive charger wilt extend its life.
o
SEAT
SEAT PAN
Fill battery with acid. Fill each cell until it reaches the
bottom of the vent wells. Do not overfill.
FLAT WASHER
ADJUSTMENT
KNOB
FIG. 3
CHECK
Follow instructions
I_
_-_]>._
_@/
FiG. 2
Downloaded from www.Manualslib.com manuals search engine
CELL
BRAKE
SYSTEM
_ VENT CAP
CHECK
TIRE PRESSURE
Install the vent caps to cover the vent wells. Wash the
top of the battery with water to remove any acid, then
wipe dry.
SHOULDER
BOLT
ACiD
LY
INSTALL
MOWER
CHECK
DECK LEVELNESS
Install second front link in the top hole of the R.H. front
mower bracket and R.H front suspension bracket.
Retain with two single loop retainer springs as shown.
Carefully remove block from behind idler pulley.
Turn height adjustment knob counterclockwise unti! it
stops.
Lower mower linkage with attachment lift lever.
CHECK
BELTS
FOR
PROPER
POSiTiON
OF ALL
See the figures that are shown for replacing motion, mower
drive, and mower blade drive belts in the Service and
Adjustments section of this manual. Verify that the belts are
routed correctly.
FRONT
CHASSIS
BRACKET
\
DOUBLE LOOP
RETAINER SPRING
L.H. GAUGE
WHEEL
BAR
SUSPENSION
ARMS
DOUBLE LOOP
RETAINER SPRING
(inward pointing
deck pins)
BRACKET
FRONT
LINKS
CLUTCH
PULLEY
"_
FRONT
SUSPENSION
BRACKET
SHOULDER
BOLT
LOOP RETAINER
SPRINGS
FRONT MOWER
BRACKET
NUT
ANTI-SWAY
BAR
3/8 WASHER
iDLER
PULLEY
BLOCK
(Wood2x4orequiv.)
GAUGE
WHEEL
DISCHARGE
GUARD
F_Go4
Downloaded from www.Manualslib.com manuals search engine
ASSEMBLY
INSTALL
BATTERY
ACCESS
DOORS
be connected
from accidenKEY
HOLE
\
VENT
CAPS
BATTERY
FIG. 6
v" CHECKMST
BEFORE YOU OPERATE AND ENJOY YOUR NEW
TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE
Tt lE BES T PERFORMANCE AND SA TISFA CTION FROM
THIS QUALITY PRODUCT,
PLEASE REVIEW THE FOLLOWING CHECKLIST:
Testing battery.
Periodic charging.
FLAT WASHER
/
(POSITWE)
/ /
/ RED CABLE
HEX
,/
'
v'
,/
,/
v"
,/
v"
(Minimum
purposes,
HEX BOLT
NEGATIVE)
BLACK CABLE
,/
,/
v"
DRAIN TUBE
v"
LOCK WASHER
FtGo 5
10
Downloaded from www.Manualslib.com manuals search engine
TRAY
ERATION
KNOW YOUR TRACTOR
READ THiS OWNER'S
MANUAL
AND SAFETY
RULES
BEFORE
OPERATING
YOUR
TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments, Save
this manual for future reference,
ATTACHMENT
CLUTCH SWITCH
\
iGNiTiON
LiFT LEVER
SWITCH
AMMETER
CHOKE
CONTROL
LIGHT SWITCH
LIFT LEVER
CLUTCH/BRAKE
PEDAL
PARKING
LEVER
THROTTLE
CONTROL
BRAKE
RANGE SHIFT
LEVER
HEIGHT
ADJUSTMENT
KNOB
GEARSHIFT
./
LEVER
FIG, 7
Our tractors conform to the safety standards of the American National Standards Institute.
(4.
UGHT SWITCH - Turns the headlights on and off.
CLUTCH!BRAKE
PEDAL - Used for declutching
braking the tractor and starting the engine.
GEARSHIFT
tractor,
THROTTLE
and
11
Downloaded from www.Manualslib.com manuals search engine
pedal into
OPERATI
=
The operation of any tractor can resumt in foreign objects thrown into the eyes, which can resumt
in severe eye damage. Always wear safety g_asses or eye shieJds white operating your tractor
or performing any adjustments or repairs, We recommend a wide vision safety mask for over
the spectacles or standard safety glasseso
BRAKE
Depress clutch/brake
and hotd.
(See Fig. 8)
iGNiTiON
KEY
PARKING BRAKE
"ENGAGED"
POSiTiON
TO USE THROTTLE
ATTACHMENT
CLUTCH
SWITCH
"ENGAGED"
POSITION
TO USE CHOKE
CHOKE
ADJUSTMENT
KNOB
\
DRIVE"
POSITION
"DaSENGAGED"
POSNTION
TO ADJUST MOWER
(See Fig. 8)
(See Fig, 8)
o
o
HEIGHT
position,
NOTE:
Failure to move throttle control to slow (,_)
position and allowing engine to idle before stopping may
cause engine to "backfire".
o
CUTTING
The cutting height is controlled by turning the height adjustment knob in desired direction.
,
Depress clutch/brake pedal into full "BRAKE" position.
*
Move gearshift lever to neutral (N) position.
ENGINE ,
AND BACKWARD
FIG. 8
STOPPING
(See Fig, 8)
(See Fig. 8)
GEARSHIFT
LEVER
HEIGHT
PEDAL
"BRAKE ....
POSKTJON
CONTROL
TO MOVE FORWARD
"DISENGAGED"
POSITION
LEVER
BRAKE
(See Fig, 8)
THROTTLE
CONTROL
LEVER
CLUTCH/
CONTROL
12
Downloaded from www.Manualslib.com manuals search engine
OP
TO ADJUST
GAUGE
WHEELS
RAT
(See Fig. 9)
TO OPERATE
ON HILLS
CAUTION:
Do not drive up or down
hills with slopes greater than 15 and
do not drive across any slope.
RETAINER
SPRING
CLEVIS PIN
GAUGE WHEEL
GAUGE
WHEEL
TO TRANSPORT
o
,,
TO OPERATE
MOWER
BEFORE
o
o
lift control.
CHECK
clutch
STARTING
ENGINE
THE ENGINE
OIL LEVEL
RUNNER
_DISCHARGE
GUARD
FIG. 11
FiG. 10
13
Downloaded from www.Manualslib.com manuals search engine
OPERATmON
ADD GASOUNE
MOWING
WARNING:
Experience indicates that alcohol blended
fuels (called gasohol or using ethanol or methanol) can
attract moisture which leads to separation and formation of
acids during storage. Acidic gas can damage the fuel
system of an engine while in storage. To avoid engine
problems, the fue! system should be emptied before storage of 30 days or longer. Drain the gas tank, start the
engine and let it run until the fuel lines and carburetor are
empty. Use fresh fuel next season. See Storage Instructions for additional information.
Never use engine or
carburetor charier products in the fuel tank or permanent
damage may occur.
ENGINE
(See Fig. 8)
position.
When starting engine for the first time or if engine has run
out of fuel, it will take extra cranking time to move fuel from
the tank to the engine.
Depress clutch!brake
CAUTION:
Fill to bottom of gas tank
filler neck. Do not overfiJL Wipe off any
spilled oH or fuel Do not store, spill or
use gasomine near an open flame
TO START
TIPS
position.
14
Downloaded from www.Manualslib.com manuals search engine
CUSTOME
MAINTENANCE
RESPONSiBiLiTiES
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
SERVICE
DATES
Sharpen!ReplaceMower Blades
C I Lubrication Chart
T I Check Battery,Level/Recharge
O
E!
N
G
J
N
El
Change more often when operating under a heaw load or in high ambient temperatures.
- Service more often when operating in dirty or dusty conditions.
GENERAL
RECOMMENDATIONS
LUBRICATION
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence.
To
receive fu!l value from the warranty, operator must maintain
tractor as instructed in this manual.
(_)TIE
system.
CHART
::::::: :::::
FRONT WHEEL Q
BEFORE
EACH
SECTOR GEAR
TEETH
ENGINE (_)
USE
,,
TRANSAXLE
FLUID
(_SAE
(_) GENERAL
PURPOSE
GREASE
15
SILICONE
SG
RESPONSIBILITIES
LUBRICANT
"ENGINE"
SECTION
CUSTOME
RESPO
LITIES
TRACTOR
BRAKE
OPERATION
TIRES
,,
Maintain proper air pressure in al! tires (See "PRODUCT SPECIFICATIONS" on page 3 of this manual).
Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.
BLADE
CENTER
CARE
HOLE
518" BOLT
BLADE
REMOVAL
Re-
BLADE
OR PIN
V-BELTS
FIG. ! 4
TRANSAXLE
o
Tighten bolt securely (30-35 Ft. Lbs. torque).
IMPORTANT: BLADE BOLT IS GRADE 8 HEATTREATED.
CHECK TRANSAXLE
(See Fig. 15)
MANDREL
ASSEMBLY
BLADE
COOMNG
o
LOCK WASHER
OIL LEVEL
SPECIFI-
TRANSAXLE
FILLER PLUG
o
o
FIG. 13
TO SHARPEN
BLADE
NG. 15
16
Downloaded from www.Manualslib.com manuals search engine
CUSTO
BATTERY
Sl
Change the oil after the first two hours of operation and
every 50 hours thereafter or at least once a year if the
tractor is not used for 50 hours in one year.
Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.
After oil has drained corn pletely, replace oil drain plug
and tighten securely.
Refill engine with oil through oil fill dipstick tube. Pour
slowly. Do not overfill. For approximate capacity see
"PRODUCT SPECIFICATIONS"
on page 3 of this
manual.
in the
L__q::::C:=:ZT__I
LITIES
VENTvENT
CAP
WELL
BATTERY
CELL ACID
LEVEL
OIL FILL
CAP/DIPSTICK
FiG. 16
ENGmNE
LUBRiCATiON
Only use high quality detergent oi rated with API service
classification SG. Select the oil's SAE viscosity grade
according to your expected operating temperature.
SAE VISCOSITY
GRADES
FIG. 18
:)o
-20 <
qEMPERATURE
30
- 10
RANGE
60
0'
AN3 r CiPATED
10'
BEFORE
80 _
20'
NEXT
30'
40
OIL CHANGE
FIG, 17
17
Downloaded from www.Manualslib.com manuals search engine
CUSTOME
CLEAN
AmR SCREEN
PONSI
ILITIES
WING NUT
CARTRIDGE
PLATE
_S_'_
FOAM
ENGINE
COOLING
SEAL
_'_J JJ
FIG. 20
A_R SCREEN
COOLING FINS
(BOTH S_DES)
MUFFLER
inspect and replace corroded muffler and spark arrester (if
equipped) as it could create a fire hazard and/or damage.
SPARK
PLUGS
ENGINE
OIL FILTER
Replace the engine oil filer every season or every other oil
change if the tractor is used more than !00 hours in one
year.
IN-LINE
FIG. 19
FUEL FILTER
CLAMP
FUEL FILTER
FMGo21
Gently tap the flat side of the paper cartridge to dislodge dirt. Do not wash the paper cartridge or use
pressurized air, as this will damage the cartridge.
Replace a dirty, bent, or damaged cartridge.
Reinstall the pre-cleaner
paper cartridge.
CLEANING
,,
Install the air cleaner cover and wing nut. Tighten wing
nut 1/2turn to 1 fullturn after nut contactscover. Do not
overtighten.
18
Downloaded from www.Manualslib.com manuals search engine
ADJU
SERVICE
CAUTION:
BEFORE PERFORMING
Depress dutch/brake
pedal fully and set parking brake,
Place gearshift lever in neutral (N) position=
Place attachment ctutch in "DISENGAGED"
position.
Turn ignition key "OFF" and remove key.
Make sure the blades and all moving parts have completely stopped,
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact
with plug.
o
-
TRACTOR
TO REMOVE
TO LEVEL MOWER
MOWER
HOUSING
Raise one side of mower by tightening lift link adjustment nut on that side.
TO iNSTALL
NTS
Lower one side of mower by loosening lift link adjustment nut on that side.
NOTE: Each half turn of adjustment nut will change deck
level about 1/4".
MOWER
FRONT
SUSPENSION
BRACKET
ADJUSTMENT
SUSPENSION
ARMS
NUTS
LIFT
LINKS
\
FRONT MOWER
BRACKET
ELECTRIC
CLUTCH
PULLEY
CHASSIS
BRACKET
FRONT
SUSPENSION
BRACKET
RETAINER
SPRINGS
/
RETAINER
SPRING
MOWER
BRACKET
/
ANTFSWAY
BAR
\
\
FIG. 22
19
Downloaded from www.Manualslib.com manuals search engine
SERVICE
AND AOJ
STMENTS
TO REPLACE
FRONT-TO-BACK ADJUSTMENT (See Figs. 24 and 25) iMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF
THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS
NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS
EQUALLY SO MOWER WILL STAY LEVEL SIDE-TOSIDE.
To obtain the best cutting results, the mower housing
should be adjusted so the front is approximately 1/8" to 1/2"
lower than the rear when the mower is in its highest
position.
Check adjustment on right side of tractor. Measure distance ',F" directly in front of and behind the mandrel at
bottom edge of mower housing as shown.
,
Before making any necessary adjustments, checkthat
both front links are equal in length:
MOWER
DRIVE. BELT
Check primary idler arm and two idlers to see that they
rotate freely.
"F" _
SPRING
_ "F"
G ROU N_DL_NE
/Z7Z?77-77777777_/
7_;:_:(
:7 iTZ777-_T77*777777-T/7
FIG. 24
i:iii!_
BOLT IN
HOUSING
FIG, 26
NUT "H"
FRONT LINKS
FiG. 25
2O
Downloaded from www.Manualslib.com manuals search engine
SE
TO
REPLACE
MOWER
CE
BLADE
ADJUSTMENTS
DRIVE
BELT
NYLON LOCKNUT
(3)
BRAKE
FIG, 28
TO ADJUST
BRAKE
CENTER
MANDREL
COVER
/
iDLER ARM
tSCREW
NUT "A"
SPRING j
SWAY-BAR
BRACKET
OPERATING
ARM
iDLER
PULLEY
NUT
FIG. 27
TO ADJUST ATTACHMENT
(See Fig. 28)
CLUTCH
PLATE
FiG, 29
21
MOTION
DRmVE BELT
TO ADJUST
FRONT WHEEL
TOE-IN
ADJUSTMENT
Adjusttieroduntildimenslon"A"isl/8"tol/4"lessthan
dimension "B".
ALIGNMENT
WHEEL
STEERING
FRONT
OF TRACTOR
FIG. 31
ADJUSTMENT
BELT
TIE ROD
CLUTCHING
FLAT gDLER
ENGINE
PULLEY
SLEEVES
ABOVE
VqDLER
JAM NUTS
BELT
TWISTS
/\
BELT
KEEPER
PULLEY
TRANSAXLE
PULLEY
FIGo 32
FRONT WHEEL
22
Downloaded from www.Manualslib.com manuals search engine
CAMBER
SE
TO REMOVE
WHEEL
CE AN
USTMENTS
FOR REPAIRS
POSTVE
I NE
(+)
(-)
FiG. 34
WASHERS
RETAINING
PANEL
RING \
AXLE
covE_
FiG. 33
FiG. 35
REAR WHEEL o
TO REPLACE
Raise hood.
BATTERY
CAUTION:
Lead-acid batteries gener=
ate eplosive gases. Keep sparks, flame
and smoking materials away from batteries.
Always wear eye protection
when around batteries.
INTERLOCKS
TO REPLACE
CABLES -
TO REMOVE CABLES, REVERSE ORDER BLACK cable first from chassis and fully charged
battery.
RED cable last from both batteries.
23
Downloaded from www.Manualslib.com manuals search engine
FUSE
AND RELAYS
IMPORTANT:
YOUR TRACTOR iS EQUIPPED WITH A 12
VOLT NEGATIVE
GROUNDED
SYSTEM.
THE OTHER
VEHICLE
MUST
ALSO
BE A 12 VOLT
NEGATIVE
GROUNDED
SYSTEM.
DO NOT USE YOUR TRACTOR
BATTERY TO START OTHER VEHICLES.
BULB
TO ATTACH JUMPER
HEADLIGHT
The
CE AND ADJUSTMENTS
TO ADJUST ATTACHMENT
(See Fig. 36)
LiFT SPIRING
ADJUSTMENT
BOLT
,,
Turn adjustment
tachments.
Retighten
bolt counterclockwise
spring
HOOD
AND
JAM NUT
bushing.
GRILL
BUSHING
IMPORTANT:
DO NOT ADJUST FOR MAXIMUM SPRING
TENSION WHEN USING LIGHT ATTACHMENTS
SUCH
AS A MOWER.
ADJUST LIFT LEVER SPRING TO AID IN
LIFTING ATTACHMENT.
DO NOT OVERPOWER
SPRING.
WHEN REMOVING
ATTACHMENT,
ALWAYS ADJUST
SPRING TENSION TO ITS LOWEST POSITION.
TO REMOVE
SPRING
ATTACHMENT
UFT SPRMNG
FiG. 36
ASSEMBLY
Raise hood.
WIRE
CONNECTION
,/
,,
HOOD
FNG.37
24
Downloaded from www.Manualslib.com manuals search engine
SERVICE
ADJU
ACCELERATION
ENGINE
TO ADJUST
THROTTLE
(See Fig. 38 & 39)
CONTROL
CABLE
TO ADJUST
CARBURETOR
(See
Fig. 40)
The carburetor has been present at the factory and adjustment should not be necessary. However, minor adjustment
may be required to compensate for differences in fuel.
temperature, altitude or load. If the carburetor does not
need adjustment, proceed as follows:
CASING
CLAMP \
STOP SCREW
/
j"
With engine off turn idle fuel adjusting needle in (clockw_se) closing it finger tight and then turn out (counterclockwise) 1-1/4 turns.
FIG. 38
STOP
SPEED
CONTROL
LEVER
FroG.39
IDLE SPEED
ADJUSTING
SCREW -o
25
Downloaded from www.Manualslib.com manuals search engine
SPEED CONTROL
LEVER
/li;?1
SETTING -
TEST -
ENTS
FIG, 40
STORAGE
Immediately prepare your tractor for storage at the end of
the season or if the tractor will not be used for 30 days or
more.
ENGINE
FUEL SYSTEM
iMPORTANT:
IT IS IMPORTANT
TO PREVENT
GUM
DEPOSITS
FROM FORMING
IN ESSENTIAL
FUEL
SYSTEM PARTS SUCH AS CARBURETOR
FUEL FILTER,
FUEL HSE. OR TANK DURING
STORAGE.
ALSO,
EXPERIENCE
INDICATES
THAT ALCOHOL
BLENDED
FUELS ICALLED
GASOHOL
OR USING ETHANOL
OR
METHANOL)
CAN ATTRACT MOISTURE
WHICH LEADS
TO SEPARATION
AND FORMATION
OF ACIDS DURING
STORAGE.
ACIDIC GAS CAN DAMAGE
THE FUEL
SYSTEM OF AN ENGINE WHILE IN STORAGE.
TRACTOR
Remove mower from tractor for winter storage
When
mower is to be stored for a period of time. clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a
clean, dry area.
-
Inspect and replace belts, if necessary (See belt replacement instructions in the Service and Adjustments
section of this manual).
ENGINE
CYUNDERS
OIL
Drain oil (with engine warm) and replace with clean engtne
oil. (See "ENGINE" in the Customer Responsibilities
section of this manuab.
BATTERY
-
Start the engine and tet it run until the fuel lines and
carburetor are empty.
Never use engine or carburetor cleaner products in the
fuel tank or permanent damage may occur.
Use fresh fuel next season.
OTHER
o
o
o
26
Downloaded from www.Manualslib.com manuals search engine
SE
ICE
27
Downloaded from www.Manualslib.com manuals search engine
OTES
T iOUBLESHOOTING
TS
PROBLEM
CAUSE
Hard
to start
Engine
Engine
start
clicks
Loss of power
1.
Out of fuel,
2.
3.
4.
5.
6.
7.
1.
properly.
2,
3.
4.
5.
6.
7.
8.
9.
10.
8,
9.
10.
1.
2.
3.
4.
5.
6.
7.
8,
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.
4.
1.
2,
5.
6.
7,
8.
9.
3.
4.
5.
6.
7.
8.
9.
Contact an authorized
1,
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4,
5.
6.
7.
8.
9.
!,
2.
3.
4,
5.
6.
7.
8,
9.
10.
!1,
12.
13.
14.
15.
Excessive
vibration
CORRECTION
1.
2.
3,
10.
11.
12.
3.
!4.
15.
1.
2.
3.
28
Downloaded from www.Manualslib.com manuals search engine
service center/department.
parts.
TROU
LESH
OTI
POINTS
CORRECTION
PROBLEM
CAUSE
Faulty operator-safety
1.
2.
1,
1.
2.
3.
4.
5.
3,
4.
5.
engaged
Poorcut-uneven
1.
Obstruction
Remove obstruction,
2.
3.
4.
2,
3,
4
1
2,
3,
4,
1.
2.
3.
4.
5.
6.
7.
8,
9.
t0,
11.
ir clutch mechanism.
5
6.
7
8
9
10.
11
1.
2.
3.
4.
5,
Switch is "OFF",
Bulb(s) burned out.
Faulty light switch.
Loose or damaged wiring.
Blown fuse.
1.
2,
3.
4.
5.
1.
2.
3.
4.
1.
2.
Replace battery.
Check/clean all connections.
3.
4.
Replace regulator.
Replace alternator.
1,
Engine "backfires"
when turning engine
"OFF"
29
Downloaded from www.Manualslib.com manuals search engine
18 HP 44" TRACTOR
= MODEL NUMBER
917.257720
SCHEMATIC
RED
BLACK
BATTE RY
FUSE 30 AMP.
RED
RED
AMMETER
WHITE
[c---;
,_
_
.........
I
; ("_) I _
F
,,
RED
WH,TE
hi _@_
L__
CLUTCH / BRAKE
(PEDAL UP)
STARTER
BLAO,.
SOLENO,D
ELECTRIC CLUTCH
t
REDo--_a a X a /--O_L!I
3LACK
_D
SEAT SWITCH
(NOT OCCUPIED)
t
q-
I--
__
GROUNDING
CONNECTOR
I!
BLACK
(_
IGNITION
UNIT
SPARK
9_----_
PLUGS
RED
ORANGE
_D
HEADLIGHT
_i_._
SWITCH (OFF)
BROWN
___
BLACK
HEADLIGHTS
NON-REMOVABLE
CONN ECTtONS
IGNITION SWITCH
CIRCUIT
_--
M+G
If0
E H_B
D IUA
REMOVABLE
CONN ECTIONS
30
Downloaded from www.Manualslib.com manuals search engine
G FC
PTO SWITCH
POSITION
CIRCUIT
OFF
ON
JC+F,B=E,A+D
C _ G
REPAIR PARTS
18 HP 44" TRACTOR
- - MODEL NUMBER
917.257720
DECALS
18
13
7 15
!5
/8
13
\
8
10
11
12
14,
KEY PART
NO. NO.
1
2
3
4
6
7
8
9
10
!1
12
138955
142254
138042
138043
133644
138048
142243
128314
137537
4900J
138435
WHEELS
2_
KEY PART
NO. NO.
DESCRIPTION
Decal
Decal
Decal
Decal
Decal
Decal
Decal
Decal,
Decal,
Decal,
Decal,
Operating Instruction
Grill GT6000 USA Black
Hood, Craftsman, RH
Hood, Craftsman, LH
Maintenance
Side Panel
Side Panel
Fender, Craftsman
Caution
Clutch/Brake
V-Belt Drive Schematic
13
!4
15
17
18
19
23
- -
105567X
139346
142242
138834
132266
138047
I06202X
138311
140330
140331
KEY PART
NO. NO,
& TIRES
1
2
3
/3
7
4
5
/
8
/
/
7
8
59192
65139
106228X427
106277X427
8134H
7154J
106230X
105588X
278H
6856M
9040H
104757X
136327
DESCRIPTION
Decal, Chassis, 6 Speed/44"
Decal, V-Belt Schematic
Decal Hood Insert Hd GT
Decal, Dash
Decal, Insert Strg
Decal, Battery
Reflector, Taillight
Decal, Handle Lft Height Adjust
(Lift Handle)
Manual, Owner's (Eng)
Manual, Owner's (Span)
DESCRIPTION
Cap, Valve, Tire
Stem Valve
Rim Assembly, Front
Rim Assembly, Rear
Tube, Front (Service Item Only)
Tube, Rear (Service Item Only)
Tire, Front
Tire Rear
Fitting, Grease (Front Wheel Only)
Fitting, Grease
Bearing, Flange (Front Wheel Only)
Cap, Axle (Front Wheel Only)
Cover, Axle (Rear Wheel Only)
31
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
- MODEL NUMBER
917.257720
ELECTRICAL
22
23
41
24
\
42
19
33
\,
25
12
45
11
38
/
9
7
54
32
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
--MODEL
NUMBER
917,257720
ELECTRICAL
KEY
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
!9
20
21
22
23
24
25
26
28
29
30
31
32
33
34
38
40
41
!21537X
74760412
STD551025
STD551125
121264X
STD541025
7697J
7603J
109596X
72240460
!02476X
123198X
10090400
73350400
127441X
4152J
1!150400
4799J
4799J
108824X
121080X
121305X
140399
140400
141226
140403
1107t2X
140660
140428
17720408
42
43
45
50
51
53
131563
138406
122822X
140404
140405
71031008
54
55
73951000
104445X
NOTE:
DESCRmPTION
Battery
Bolt, Hex 1/4-20 x 3/4
Washer 9/32 x 5/8 x 16 Ga.
Washer, Lock 1/4
Caps, Battery
Nut, Hex 1/4-20
Tube, Drain
Tray, Battery
Clamp, Hose
Bolt, Carriage 1/4-20 x 7-1/2
Guard, Terminal
Nut, Wing 1!4-20
Washer, Lock 1/4
Nut, Hex Jam 1/4-20
Harness, Light Socket
Bulb, Headlight
Washer, Lock, tnt. Tooth
Cable Battery
Cable Battery
Fuse
Cable, Ground
Switch, Plunger
Switch, Ignition
Nut, Ignition
Cover, Switch Key
Key, Ignition
Switch, Light
Harness Adapter
Harness, Ignition
Screw, Hex Washer Head, Thread
Cutting 1/4-20 x 1/2
Cover, Terminal
Solenoid
Ammeter
Switch, P.T.O.
Ring Retainer PTO
Screw, Hex Washer Head #1032xl/2
Nut, Keps #10-32
Switch, lntlk CI Grd Gry 2 Term
33
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
CHASSIS
= MODEL NUMBER
917.257720
AND ENCLOSURES
14
18 \
\\
\
\
59
92
93
37
49
68
73
47
52
25
43
58
34
94
78
5O
17
93
2O
19
7O
24
86
85
/
67
21 94/,_
25
39
34
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
CHASSIS
AND ENCLOSURES
KEY PART
NO. NO.
DESCRmPTION
1
2
3
4
5
6
7
8
9
10
1!
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Rail, Frame RH
Drawbar, Gt
Panel Asm., Side LH
Nut, Lock Hex 7/16 Unc
Dash, Plastic Black
Dash Asm., Lower
Screw, Thd Cut 1/4-20 x !/2
Support, Battery
Nut, Pa
Washer 9/32 x lq/4 x 16 Ga.
Rivet, Ratchet Male
Washer, Nylon
Rivet, Ratchet Female
HoodAsm,
Pnt
Lens. Bar Clear
Cover, Access
Screw, Thdrol 3/8-16 x 3/4
Grille
Washer 13/32x 13/16x 12Ga.
Bolt, Fin Hex 3/8-16 x 1
Nut, Lock Hex W/Wsh 3/8-16 Unc
Panel Asm., Side RH
Panel, Dash Side RH
Footrest, RH
Screw, Thdrol 3/8-16 x 3/4
Screw, Thdrol 5/16-18 x 3/4
Panel, Dash Side LH
Footrest, LH
Bracket, Support Dash
Saddle, Slkscr Vgt
Brace, Support Steering
Bracket Asm., Frame Pivot Lh
Bracket Asm., Frame Pivot Rh
Bracket, Engine Support Rear
Washer 11i32xll/16x16Ga.
Bolt, Fin Hex 5/16-18 x 3/4
Fender, Pnt
Washer 9/32 x 3/4 x 16 Ga.
Bracket, Axte Front
Bracket, SupportAxle/Engine
Bolt Fin Hex 1/4-20 Unc x 1/2
Bolt Carriage 3/8-16 x 1
Bracket, Spnsn Front Lh
140505
140506
136671X459
73800700
136696
139420
17720408
137563
108067X
19092016
137270
137269
137271
136673X459
136374
121794X
17490612
136373X428
19131312
74760616
73800600
136670X459
121045X
105464X459
17490612
17490512
12!046X
105465X459
138193
137143X014
137556
136742
136741
136963
19111116
74780512
121642X459
19091216
136961
136962
74760408
72140608
136939
- MODEL
NUMBER
KEY PART
NO. NO.
44
45
46
47
48
49
50
5!
52
53
54
56
57
58
59
60
62
63
64
65
66
67
68
69
70
72
73
77
78
84
85
86
88
90
91
92
93
94
95
96
97
106
136940
138460
10040400
17490608
136814
136813
136575
72140506
73800500
137304
126470X
138461
73510400
137113
74180412
17490620
72110608
19131614
10040600
73220600
105466X
137157
17490508
139212
137159
74180512
74780616
137308
17720408
!38952
120404X
74760716
10040700
11050600
140504
140941X013
17490608
100207K
105531X
8022J
137373
17580520
917i257720
DESCRAPTION
Bracket, Spnsn Front Rh
Bracket Asm., Susp Chassis Rh
Washer, Lock Hvy Helical 1/4
Screw Thdrol. 3/8-16 x 1/2
Bracket Asm., Pivot Hood Lh
Bracket Asm., Pivot Hood Rh
Bracket, Chassis Front
Bolt, Carriage 5/16-18 x 3/4
Locknut, Hex W/Ins 5/16-18 Unc
Rod, Support Hood
Clip, Insulated
Bracket Asm., Susp Chassis Lh
Nut, Keps Hex 1/4-20
Bracket Asm.. Fender
Screw, Mach Cr 1/4-20 x 3/4
Screw Thdrol. 3/8-16 x 1-1/4
Bolt, Carriage 3/8-16 x 1 Gr. 5
Washer 13/32 x 1 x 14 Ga.
Washer, Lock Hvy Hlcl Spr 3/8
Nut, Fin Hex 3/8-16 Unc
Pad, Footrest
Guide, Belt T/A
Screw Thdrol. 5/16-18 x 1/2
Shield Heat
Guide, Belt Mid Span
Screw, Mach Trhd 5/16-18 x 3/4
Bolt, Fin Hex 3/8-16 x 1 Gr. 5
Shield, Front
Screw, Thd. Cut 1/4-20 x 1/2
Stop, Over Center Mower
Bracket, Support Transaxle
Bolt, Fin Hex 7/16-!4 Uric x 1
Washer, Lock Hvy HIcl Spr 7/16
Washer, Lock External Tooth 3/8
Rail, Frame Lh
Plate, Silkscreen Dash
Screw, Thdroi 3/8-16 x 1/2
Clip, Fue! Line
Push Nut, Nylon
Plug, Hole
Shield, Heat, Engine
Bolt 5/16-18 x 1-!!4
35
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
GROUND
- MODEL
NUMBER
917.257720
DRIVE
i
':
=,,
38
36
37
6 31
68
64
37
/
38
5O
/
<,._..
56
36
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
GROUND
KEY
NO.
PART
NO.
1
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
!9
20
21
22
23
24
25
26
27
9858M1
7563R
73680600
76020412
135758
12000034
140080
143046
136927
9204H
139419
38901
19131316
143012
126909X
137104
136926
72140506
23260412
633A109
106932X
136925
136923
137552
17490528
28
29
30
31
34
35
36
37
73350600
137213
19131614
76020312
124236X
137648
138364
121749X
- MODEL
NUMBER
917.257720
DRIVE
KEY
NO.
DESCRiPTiON
Key, Woodruff
Washer, Thrust Axle
Nut, Crownlock 3/8-16
Pin, Cotter
Wheel, Hub Assembly
Klip, Ring
Bolt, Hub
Disc, Brake
Yoke, Brake Disc
Locknut 1/2-20
Washer, Special
Bushing
Wahser 13/32 x 13/16x 16 Ga.
Set, Screw 1/4-28 3/4
Spring
Lever, Brake
Cam, Brake Disc
Bolt, Carriage 5/18-18 x 3/4
Screw. Flat Head 1/4-28 x 3/4
Gearshift, Lever Assembly
Knob
Support, Puck Brake
Puck. Brake Top
Spring, Return
Screw, Hex Wsh Thd. 5/16-18 x 13/4
Nut, Hex Jam 3/8-16
Brake, Rod
Washer 13/32 x 1 x 14Ga.
Pin, Cotter 3/32 x 3/4
Cap, Plunger
Rod, Parking Brake
Spring, Extension
Washer 25/32 x 1-1/4 x 16 Ga.
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
110895X
74321016
5304J
73631000
8883R
74760412
104601X
73800400
121358X
138228
72110614
19131413
131494
73800600
139123
207J
138390
105706X
137153
105598X
73800500
122253X
122268X
137524
10040700
74760720
137649
67609
140296
19131312
5!42H
136327
DESCRiPTiON
Nyliner
Screw, Fin. #10-24 x !
Actuator, Interlock Switch
Locknut #10-24
Cover, Pedal
Bolt, Hex 1/4-20 x 3/4
Bracket, Interlock
Locknut w/Insert 1/4-20
Retainer, Spring
Clutch Rod
Bolt, Carriage 3/8-16 x 1-3/4 Gr. 5
Washer 13/32 x 7/8 x 13 Ga.
Pulley, Idler, Flat
Locknut, Hex 3/8-16
Pulley, Idler, Grooved
Washer, Hardened
Clutch, Arm Assembly
Bearing, Idler
WBelt
Bracket, Shift Rod, Hi-Lo
Locknut. Hex, with Insert 5/16-19
Shift Rod, Hi-Lo
Spring Clip, Connecting Link
Pulley, Transaxle
Washer. Lock 7/16
Bolt, Fin Hex 7/16-14 x 1-1/4
Shaft, Clutch/Brake Pedal
Bolt, Shoutder
Washer, Hardened
Washer, Flat
Pin. Roll
Hub, Cover
37
Downloaded from www.Manualslib.com manuals search engine
PART
NO.
REPAIR PARTS
18 HP 44" TRACTOR
STEERING
= MODEL NUMBER
ASSEMBLY
26
24
23
22
31
/
34
33
32
/
27
19
5
27
/
6/
/
16
//
38
Downloaded from www.Manualslib.com manuals search engine
917.257720
REPAIR PARTS
18 HP 44" TRACTOR
STEERING
= MODEL NUMBER
917.257720
ASSEMBLY
KEY
NO.
PART
NO.
!
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
121472X
137094
6855M
136960
136959
6266H
121748X
12000029
121232X
74781044
136518
73901000
121749X
10040600
73610600
102458X
137347
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
137155
138053
139811
100711L
1554J
17431008
19133808
74780616
126805X
3366R
73800600
104239X
12000034
138136
19111610
10040500
74760512
138059
137156
73360600
109850X
73700600
109851X
NOTE:
DESCRIPTION
Wheel, Steering
Axle Asm., Front
Fitting, Grease
Spindle Asm, LH
Spindle Asm., RH
Bearing, Race Thrust Harden
Washer 25/32 x 1-5/8 x 16 Ga.
Ring, Klip #T5304-75
Cap, Spindle
Bolt, Fin Hex 5/8-11 x 2-3/4
Spacer, Brg. Axle Front
Nut Lock Flange 5/8-11 Unc
Washer 25/32 x 1-1/4 x 16 Ga.
Washer, Lock Hvy Hlcl Spr 3/8
Nut, Fin Hex 3/8-24 Unf
Shaft Asm,, Steering
Rod Asm., Tie Ball J Ball Vgt (Inc.
Key No. 36_40)
Draglink, Ball Joint Solid Vgt
Support Asm., Steering Vgt
Column, Steering
Adapter, Wheel Steering
Bushing, Strg. BIk
Screw, Slftp #10-16 x 1/2 Ty-b
Washer 13/32 x 2-3/8 x 8 Ga.
Bolt, Fin Hex 3/8-16 x 1 Gr. 5
Cap, Wheel Steering
Bearing, Col. Strg.
Nut, Lock Hex W/Wsh 3/8-16 Unc
Bearing, Flange
Ring, Klip Truarc #5304-75
Bushing, Nyliner Snap
Washer 11/32 x 1 x lOGa.
Washer, Lock Hvy Hlcl Spr 5/16
Bolt, Hex Hd 5/16-18 x 3/4
Gear, Sector Steering
Tie Rod
Jam Nut RH Thread
Joint Asm. Ball RH Thread
Jam Nut LH Thread
Joint Asm. Ball LH Thread
39
Downloaded from www.Manualslib.com manuals search engine
ENGIN,E
917.257720
2O
34,
3O
......
13
32
...............
/
/
/
f
/
12
17
19
18
. _ ,S '/
"1:5
43 42
41
9
29
37
28
4O
REPAIR PARTS
18 HP 44" TRACTOR
= MODEL NUMBER
917.257720
ENGINE
KEY
NO.
1
2
PART
NO.
14! 948
144110
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
19
13240300
13280328
1320030O
138129
121361X
138559
105432X
137140
136907
138486
138487
127334X
109227X
106082X
123549X
13290300
2O
21
133439
17720410
KEY
NO.
DESCRiPTiON
Engine Kohler 18 Mag Vt
Muffler Asm Kohler VGT (Inc. Key
No. 34)
Elbow Street 3/8 NPT
Nipple Pipe 3/8NPT X 3 - 1/2
Elbow STD 90 Degree 3/8 - 18 NPT
Clamp Tube Double Engine
Pulley V-Idler
Stop Keeper Asm VGT
Bushing
Clutch Electric
Pulley Engine VGT Elect Clutch
Baffle Air LH Koh VGT
Baffle Air RH Koh VGT
Tank Fuel W/Sym Vented
Pad Spacer
Pad Spacer
Cap Asm Fuel W/Sym, Vented
Plug Oil Drain (Order From Engine
Manufacturer)
Control Throttle
Screw Hex Thd Cut 1/4 - 20 X 5/8
22
23
24
25
26
27
28
29
30
32
34
35
36
37
38
39
40
41
42
43
PART
NO.
138672
19132616
11050600
73610600
3645J
139277
7834R
105037X
17490508
17720408
10040500
74570512
123487X
11050600
17490624
17490652
126197X
10040700
71170768
DESCRiPTiON
Control Choke
Washer 13/32 X 1 - 5/8 X 16 Ga
Washer Ext Tooth 3/8
Nut Fin Hex 3/8 - 24 UNF
Bushing
Stem Tank Fuel
Fuel Line
Spark Arrester Kit
Strip Foam
Screw Thdrol 5/16 - 18 X 1/2
Screw Thd Cut 1.4 - 20 x 1/2
Washer Lock 5/16
Screw Hex 5/16 - 16 UNC X 3/4
Clamp Hose
Lockwasher Ext Tooth 3/8
Screw Thdrol 3/8 - 16 X 1 - 1/2 TT
Screw Thdrol 3/8 - 16 X 3 - 1/4
Washer 1-1/20D X 15/32 ID X .250
Washer Lock 7/16
Bolt Hex 7/16 - 20 X 4 - 1/4 Ga 5
.J
41
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
- MODEL NUMBER
917,257720
SEAT ASSEMBLY
8--.._
G__/=
9_-__
7_
pj_-9
4L"
"
\\\
":-
""'.-.rJ:
- ;-.
5
\
4
\
18
/5
"'-.
\
19
),
12
KEY
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
!0
12
t3
127439
140551
140675
127018X
140407
73680600
t24181X
17490508
19131614
140552
121246X
121248X
DESCRiPTiON
Seat
Bracket, Pivot Seat
Strap, Fender
Bolt, Shoulder 5/16o18 x .62
Clip, Push In
Nut, Crownlock 3/8-16 Unc
Spring, Seat Cprsn
Screw. Thdrol 5/16-18 X 1/2
Washer 13/32 X 1 X 14 Ga.
Pan, Seat
Bracket, Mounting Switch
Bushing, Snap
PART
NO.
14
15
16
17
!8
19
20
21
22
72050411
12!249X
123740X
123976X
19171912
120068X
124238X
139888
73680500
DESCRiPTiON
Bolt, Carriage 1/4-20 X 1-3/8
Spacer, Split
Spring, Cprsn
Nut, Lock 1/4 Lge Ftg Gr. 5
Washer 17/32 !-3/16 x 12 Ga.
Knob, Seat 1/2-13 Unc
Cap, Spring Seat
Bolt, Shoulder 5/16-18
Nut, Crownlock 5/16-18 Uric
42
Downloaded from www.Manualslib.com manuals search engine
K EY
NO.
REPAIR PARTS
18 HP 44" TRACTOR
.. MODEL NUMBER
917.257720
LiFT ASSEMBLY
40
42 43
3
/
\\
39
41 /
42
1
\
/
/
/
_23
<
25
2
\11
6
26
23
\
13
12
16
23
22
12
13
20 19"18
KEY
NO.
PART
NO.
1
2
3
4
5
6
7
8
9
!0
11
12
13
!4
15
16
17
18
19
20
21
22
23
!21006X
137295
121002X
12000022
19292016
74780624
125631X
122365X
122364X
2876H
138020
3146R
139867
140302
73800600
674A247
73350600
5329J
19131316
5328J
74760616
127218
4939M
KEY
NO.
DESCRIPTION
Rod Asm., Lever
Shaft Asm., Lift Vgt
Lever Asm., Lift Rh
EoRing Truarc #5133-87
Washer 29/32 x 1-1/4 x 16 Ga,
Bolt, Fin Hex 3/8-16 x 1-1/2
Grip, Handle Fluted
Button, Plunger
Plunger, Lever Lift
Spring 2-1/8"
Link Lift
Retainer, Spring
Arm, Suspension Vgt
Bearing
Nut, Lock Hex WfWsh 3/8-16 Unc
Spring Asm., Assist Lift
Nut, Hex Jam 3/8-16 Uno
Bracket Spring Assist
Washer 13/32 x 13/16 x 16 Ga.
Bolt, Adjust Spring Assist
Bolt, Fin Hex 3/8-16 x 1
Link, Front
Retainer, Spring
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
73350800
130171
73800800
12000037
19151216
110810X
1!0807X
19131016
137150
76020308
137167
138057
17490612
120529X
!23933X505
123935X
74780516
10040500
19112410
123934X
DESCRIPTION
Nut, Jam Hex 1/2-13 Unc
Trunnion
Nut, LockW/Wsh
!/2-13 Uric
Ring, Ktip #T5304-37
Washer 15/32x3/4x16Ga.
Trunnion Dp Stop Dbl Thds Pit
Nut. Special
Washer 13/32x5/8x
16 Ga.
Spring, Compression Inf Hgt
Pin, Cotter 3/32 x !/2
Rod, Adj Lift
Knob, Inf 3/8-16 Unc
Screw, Thdrol 3/8-16 x 3/4
Washer, Nylon
Pointer, Pnt Height Indicator
Plug, Hole
Bolt, Fin Hex 5/16-1 8 x 1
Washer, Lock Hvy HIcl Spr 5/16
Washer 11i32xl-1/2x10Ga.
Scale, Indicator Height
43
Downloaded from www.Manualslib.com manuals search engine
PART
NO.
15
REPAIR PARTS
18 HP 44" TRACTOR
44" MOWER
- MODEL NUMBER
917.257720
DECK
55
45
53
48
38
29
47
3O
6O
59
60
58
32
57\
64
24
42
\
26
6
54
\
18
17
10
/
23
44
Downloaded from www.Manualslib.com manuals search engine
22
REPAIR PARTS
!8 HP 44" TRACTOR
44" MOWER
PART
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
136471
738O0500
72110506
763tj
138457
4939M
130832
850857
10030600
129962
130652
129895
137553
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
137152
110485X
136929
106735X
19111016
105304X
t23713X
137607
110452X
109785X
13632'1
19111216
72110614
19131316
132823
73800600
133776
137266
129861
NUMBER
9! 7,257720
DECK
[qq 1- ec, e,
KEY
NO.
.- MODEL
olo
KEY
NO.
DESCRIPTION
Deck Asm., Mower 44" Vented
Locknut, Hex W/Ins 5/16-18 Unc
Bolt, Carriage 5/16-18 x 3/4
Runner, Mower LH
Bracket Asm., Sway Bar
Retainer, Spring
Arm Suspension, Rear
Bolt 3/8-24 x 1.25 Gr. 8 Patched
Washer, Lock Hvy 3/8 Unplated
Washer, Hard Blade Mower Vented
Blade
Bearing, Ball #6204 (Mandrel)
Shaft Asm., W/Lower Brg (includes
Key No. 12)
Housing, Mandrel 44" Vent
Bearing, Ball Mandrel
Stripper, Mower Vented
Rod, Hinge
Washer 11/32 x 5/8 x 16 Ga,
Cap, Sleeve
Spring, Torsion Deflector
Bracket, Deflector
Nut, Push
Shield, Deflector Mower
Runner, RH
Washer 11/32 x 3/4 x 16 Ga.
Bolt, Carriage 3/8-16 x 1-3/4 Gr. 5
Washer 13/32 x i3/16 x 16 Ga.
Spacer, Spring Stop idler
Nut, Lock Hex W_sh
3/8-16 Unc
Bolt 5/16-18 x 1,25
Nut, Fig Top Lock Cntr 9/16
Pulley, Mandrel
PART
NO.
33
129963
34
72140610
35
72110616
36
72110608
37
137166
38
137554
39
131494
40
136572
42
72140506
43
136460
44
122052X
45
73680600
46
74760628
47
137200
48
137729
49
136574
50
137272
51
137273
52
139245
53
137789
54
131264
55
131290
56138687
57
136577
58
133957
59
137644
60
139031
6t
136573
62
133943
63
72110612
64
19121414
67
73930600
DESCRIPTION
Washer, Spacer Mower Vented
Bolt, Carriage 3/8-16 x 1-1/4
Bolt, Carriage 3/8-!6 x 2
Bolt, Carriage 3/8-16 x 1 Gr. 5
Stiffener, Arm Idler
Keeper, Belt Idler
Pulley, Idler Flat
Pulley, Driven
Bolt, Carriage 5/16-18 Unc x 3/4
Arm, idler Secondary
Spacer, Retainer
Nut, Crownlock 3/8-16 Uric
Bolt, Fin Hex 3/8-16 Uric x 1-3/4
Cover, Mandrel RH
Screw, Thd RoW 1/4-20 x 5/8
Cover, Mandrel LH
Arm, Idler Primary
Spring, Secondary
Pulley, idler V Groove
Shield, Idler
V-Belt, Mower Primary
V-Bek, Mower Secondary
Spring, Primary
Bar Asm., Wheel Gauge
Wheel, Gauge
Bolt, Shoulder
Pin, Clevis
Bracket, Wheel Gauge
Washer Hardened
Bolt Cardage 3/8-16 x 1-1/2
Washer 3/8 x 3/4 x 14Ga
Nut, Centerlock 3/8-16
45
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
MODEL
NUMBER
917.257720
TRANSAXLE
15
7O
73
86
_85
88_'__87
,_.----9 7
_94
48
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
= MODEL NUMBER
917.257720
TRANSAXLE
KEY PART
NO, NO.
1
2
3
4
5
6
7
8
4197R
12000034
4199R
4216R
4215R
4217R
6256H
74020652
9
10
11
12
13
14
!5
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
7392M
137261
4985R
6266H
4212R
137125
6276H
633A63
8118M
8740H1
122238X
4218R
6252H1
7810H
6262H
7393R
992R1
139111
4986R
122254X
6269H
5855H
139538
32
33
34
35
36
37
39
6277H
4225R
7396H
4198R
4200R
7395H
139536
4O
41
45
46
49
50
51
13320400
17580520
6271H
13060200
4895H
4222R
1529R
KEY PART
NO. NO.
DESCRiPTiON
Axle Shaft
Retaining Ring
Final Drive Gear
Differential Gear
Differential Pinion
Differential Carrier
Axle Thrust Washer
Bolt, Hex Head 3/8-24 x 3-1/4
(1" Thread Length)
Steel Ball
Spring Shift Fork Detent
Shift Fork. High-Low Range
Thrust Bearing Race
4th Reduction Pinion
Shaft, Brake
Snap Ring, Crescent Type
High-Low Range Gears
Needle Bearing
Sintered iron Bearing
Shift Fork Shaft, High-Low Range
Differential Pinion Spacer
Differential Pinion Bushing
Gripco Centerlock Nut 3/8-24
Shift Fork, R.H.
Oil Sea!
Sintered Iron Bearing
Shift Fork Shaft
Shift Fork, L.H.
Shift Shaft, High-Low Range
Oil Seal
Pressure Relief Valve
Gearcase, Reverse Idler Shaft and
Bearings, R.H. (includes Key No.'s
17,18, 25, 33, 50, 63, 77 and 82)
Dowel Pin
Needle Bearing
Thrust Bearing Race
4th Reduction Gear Shaft
4th Reduction Gear Spacer
Thrust Bearing Race
Gearcase and Bearings, L.H.
(Includes Key Numbers 18, 25, 49,
50 (2), 51 and 52)
Pipe Plug 1/2-14 N.P.T.
Bolt, Hex 5/16-18 UNC x 1-1/4
Oil Seal
Pipe Plug 1/4-18 N.P.T.
Needle Bearing
Needle Bearing
Needle Bearing
8119M
4220R
4209R
4213R
4442R
4195R
42t4R
4194R
7528R
4208R
4207R
7398H
4203R
65
66
67
68
69
70
71
4204R
2898J
12000033
4205R
4206R
1370H
633A69
72
73
74
75
77
79
80
81
82
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
139120
4201R
12000008
1153R
6803J
1167R
73360700
6270H
136984
5384J
2978J
633A85
8739H!
4924H
19151516
110542X
19181511
75J
6274H
76020412
10040500
74760514
633A109
139535
NOTE:
47
Downloaded from www.Manualslib.com manuals search engine
52
53
54
55
56
57
58
59
60
61
62
63
64
DESCRiPTiON
Needle Bearing
Thrust Bearing Race
3rd Reduction Pinion, Low
4th Reduction Gear
3rd Reduction Pinion Spacer
2nd Reduction Gear Shaft
Fina! Drive Pinion
1st Reduction Gear Shaft
1st Reduction Shaft Spacer
3rd Reduction Pinion Hlgh
2nd Reduction Gear
Needle Bearing
Low Speed Gear and 2nd
Reduction Pinion Cluster
Reverse Gear
Key, Hi-Pro !/8 x 17/32
Klip Ring
Intermediate Speed Gear
High Speed Gear
Thrust Bearing Race
Intermediate and High Speed
Cluster Pinions
Input Shaft
Low Speed Pinion
E-Ring
Reverse Idler Gear
Needle Bearing
Sealing Washer
Nut, Hex, ,Jam 7/16-20
Oil Seal
Reverse Idler Shaft
Gearshift Lever, Bent
Gearshift Cap
Gearshift Ball Cover and Pin
Shift Lever Guide Ball, Keyed
Spring
Washer 15/32 x 15/16 x 16 Gauge
Shift Mechanism Seat
Washer 9/16 x !5/16 x 12 Gauge
Gearshift Gate and Reinforcement
Shift Ball Cover Gasket
Cotter Pin 1/8 x 3/4
Washer, Lock 5/16
Bolt, Hex Head 5/16-18 UNC x 7/8
Gearshift Lever Assembly
Transaxle Assembly
(Less Brake Drum and Shift Lever)
REPAIR
PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
- MODEL
NUMBER
- MODEL NUMBER
MV18S,
TYPE NUMBER
917.257720
58560
/1
/
/
8
/
7
_3
J
o
,%
--8
11
/lilt
48
Downloaded from www.Manualslib.com manuals search engine
I_+
-+
+++++-
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
= MODEL
NUMBER
= MODEL NUMBER
AiR INTAKE
KEY PART
NO. NO.
!
2
X-276-7
52 755 83
3
4
5
6
7
8
9
!0
52 096 35
52 123 2!
231032
52 082 04
45 083 01
45 083 02
237423
X-67-98
11
12
13
14
15
52 201 06
277093
52 054, 39
X-25-79
X-50-37
16
X-50-57
17
X-22-9
18
25 04! 06
917.257720
58580
KEY PART
NO. NO,
DESCRIPTION
1
2
3
4
52 063 41
52 313 05
52 063 42
X-67-83
52 755 70
6
7
8
9
52
52
52
52
217
468
086
124
01
16
11
23
NOT ILLUSTRATED
- - 52 113 46
Decal, Horsepower
BREATHER
& VENT
KEY PART
NO, NO,
1
2
3
4
5
NOT ILLUSTRATED
- - 25 113 15
Decal, Air Cleaner
-5211330
Decal
6
7
8
9
10
11
DESCRiPTiON
X=81-1
X-25-12
52 096 18
52 055 01
X-352-39
52 326
52 096
52 032
52 462
52 096
275220
(3)
12
08
04
01
22
49
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
- MODEL
NUMBER
- MODEL
NUMBER
58560
17
/
'
3
5
5O
Downloaded from www.Manualslib.com manuals search engine
18
917,257720
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
= MODEL
NUMBER
MV18S,
= MODEL NUMBER
TYPE NUMBER
CRANKCASE
DESCRiPTiON
1
2
3
X-82-2
52 468 12
82 755 16
4
5
6
7
8
52
52
52
52
52
9
10
11
12
05
01
06
50
12
13
25 086 12
X-269-43
52 078 05
52 030 10
52 030 11
52 030 12
25 086 10
14
25 086 13
!5
16
17
52 141 02
52 139 08
25 086 11
18
19
52 032 10
82 755 17
= -
58560
CARBURETOR
KEY PART
NO. NO.
016
031
316
755
072
9! 7.257720
KEY PART
NO. NO,
DESCRIPTION
1
2
52 041 09
52 755 91
3
4
5
6
52 164 15
X-21=1
X-6-29
X-75-23
7
8
235778
X-67-97
9
10
11
12
41
52
25
52
072
063
155
853
13
14
271030
52 053 54
15
16
17
18
25 041 06
X-77-2
232867
X-67-62
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
25
25
52
25
25
25
25
25
25
52
25
25
25
25
25
25
25
25
086
146
144
368
089
086
089
368
089
090
089
194
146
041
757
104
041
100
19
40
02
25
27
03
24
01
02
26
04
03
02
13
03
01
02
04
09
01
03
05
NOT ILLUSTRATED
- - 25 757 11
Kit, Carburetor Repair
- - 25 757 23
Kit, Bowl Baffle
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm
51
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
- MODEL
NUMBER
o MODEL
NUMBER
O_4
:1
4_
@-D
2
1
--6
52
Downloaded from www.Manualslib.com manuals search engine
58560
917.257720
REPAIR PARTS
18HP 44" TRACTOR
KOHLER
ENGINE
MODEL
NUMBER
MV18S,
.. MODEL NUMBER
TYPE NUMBER
CRANKSHAFT
KEY PART
NO. NO.
1
2
52
52
52
52
014
468
468
468
KEY PART
NO, NO.
Crankshaft
Washer, Thrust .119/.122 (A.R.)
Washer, Thrust .128/.131
Washer, Th rust .137/. 140 (A. R,)
DiPSTiCK
KEY PART
NO. NO.
1
52 038 14
2
3
4
5
6
7
X-25-44
52 032 14
41 153 01
52 126 11
52 123 20
47 139 01
DESCRiPTiON
1
2
3
4
52 04.1 20
52 015 08
220534
41 086 02
52 098 12
2
3
4
5
6
7
8
9
X-20-1
X-81-1
82 755
52 081
52 170
52 211
52 227
82 755
26
07
05
01
10
28
Starter Assembly
(Includes Key Numbers 4 thru 9)
Washer, Lock 1/4 (2)
Nut, Hex 1/4-20 (2)
Kit, Drive
Cap, Drive End
Armature
Bolt, Thru (2)
Cap, Commutator End
Kit, Brush
EXHAUST
KEY PART
NO. NO,
1
2
3
4
DESCRiPTiON
52 126 12
X-25-72
52 086 11
52 041 14
NOTE:
Gasket, Head (2)
Cylinder Head (2)
Washer. Plain 5/16 (18)
Screw, Hex Head
5/16-18 x 1-1/2 (18)
53
Downloaded from www.Manualslib.com manuals search engine
DESCRIPTmON
NOT ILLUSTRATED
- - 25 450 03
Tag, Caution
Dipstick Assembly
Includes Key Numbers 2 and 3)
asher, Plain 5/16
Seal, Rubber
Q-Ring
Bracket, Oil Tube Support
Tube, Oil Fill 11-7/8
Plug, Hex, Countersunk
3/4 N.P.T.F.
CYLINDER HEAD
KEY PART
NO, NO,
58560
ELECTRIC STARTER
DESCRiPTiON
93
03
04
05
917.257720
DESCRiPTiON
Bracket
Washer, Plain (3)
Screw 1/4-20 x 5/8 (3)
Gasket, Exhaust (2)
REPAIR PARTS
18 HP 44" TRACTORKOHLER
ENGINE
oMODEL
NUMBER
MV18S,
TYPE NUMBER
58560
FUEL PUMP
\
s
!o
/
\g
iGNiTiON
6_3
11
-_14
10 --_]
8
9
54
Downloaded from www.Manualslib.com manuals search engine
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
- MODEL
NUMBER
MVlSS,
- MODEL NUMBER
TYPE NUMBER
FLYWHEEL
58560
FUEL PUMP
KEY PART
NO. NO.
DESCRIPTION
1
2
25 162 01
25 086 21
3
4
5
6
7
8
25 112 04
2515701
25 086 24
52 468 15
X-286-17
52 025 36
KEY PART
NO. NO.
Screen. Grass
Screw Hex Washer Head
1/4-20 x 5/8 (4)
Spacer (4)
Fan
Screw, Hex Machine 3/8-24 x 1-1/4
Washer_ Plain
Key, Square 3/16 x 7/8
Flywheel
GOVERNOR
KEY PART
NO. NO.
DESCRIPTION
47 086 08
52 559 01
3
4
5
6
7
8
9
10
X-380-1
X-25-63
25 041 09
25 155 02
X-426-9
52 353 18
25 050 03
15 353 04
DESCRIPTION
iGNiTION
1
2
3
4
5
6
7
8
9
10
11
12
231355
X-25-12
237022
A-235743-S
52 O78 04
X_25-102
X-269-28
X-25-72
52 090 23
277341
52 158 07
25 086 15
13
14
15
16
17
52 089 07
X-81-1
X-25-63
52 186 09
52 211 04
18
19
20
21
22
23
24
25
25
52
52
52
52
25
25
X-67-97
26
27
28
29
235778
25 431 01
X-70-3
52 086 05
141
158
079
O79
090
089
086
917.257720
03
08
07
06
14
08
21
KEY PART
NO. NO.
25 755 03
2
3
4
5
6
7
X-132-5
236602
237878
X-67-51
210281
X-67-64
8
9
10
11
12
13
41 155
220297
52 3!3
52 132
52 126
25 086
14
15
52 584 02
25 086 16
03
02
02
08
15
Kit, Rectifier-Regulator
(Includes Key Number 2)
Screw, Hex Cap 1/4-20 x 5/8 (2)
Connector, 3 Contact
Kit, Stator (Includes Key Number 5)
Screw, Hex Cap #10-24 x 3/4 (2)
Clip (2)
Screw, Hex Washer Head
#10-32 x 7/16
Connector, 2 Contact
Grommet, Rubber
Grommet
Spark Plug (2)
Bracket, Module
Screw, Hex Washer Head
!/4-20 x 1 (2)
Module, Ignition
Screw, Hex Washer Head
1/4-20 x 7/8 (2)
NOT ILLUSTRATED
47 518 33
Lead, Violet, Rectifier-Regulator
(11", 14 Gauge, Uninsulated Push
On Tab Terminals)
52 518 !9
Lead, White, Module To Connector
(19-1/2", 14 Gauge, Insulated Push
On Tab, Uninsulated Push On Tab
Terminals)
NOTE: All component dimensions given in U.S, inches
1 inch = 25.4 mm
55
Downloaded from www.Manualslib.com manuals search engine
DESCRiPTiON
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
= MODEL
NUMBER
- MODEL NUMBER
917.257720
58560
OiL FILTER
OiL PAN
r_
_%\
--3
L____T_____
2
CAMSHAFT
__2
AND VALVES
2
4
7_
6
56
Downloaded from www.Manualslib.com manuals search engine
-6
REPAIR PARTS
18 HP 44" TRACTOR
KOHLER
ENGINE
- MODEL
NUMBER
- MODEL NUMBER
DESCRIPTION
X-67-64
2
3
4
5
6
52 050 03
52 199 14
X-702-14
52 054 07
X-75-38
7
8
X-75o10
52 086 12
52 032 10
52 050 02
82 755 23
X_55-15
X-75-23
52 041 16
1
2
3
4
52 067
52 067
52 874
52 874
52 874
52 874
52 874
230004
52 108
1
2
3
4
5
6
7
8
9
OIl Filter
Kit, Oil Filter Adaptor
(Includes Key Numbers 3 thru 5)
Screw, Hex Socket Head
5/16-18 x !-1/4 (2)
Plug, Hex, Countersunk
t/8 NP.T.F.
Gasket, Oil Filter
09
52 012
52 019
41 755
52 413
25 089
52 016
52 0!7
52 032
230011
KEY PART
NO. NO.
1
2
3
X-280-25
52 144 05
52 422 01
4
5
6
7
52 043 05
52 393 09
52 096 03
X-67-64
Camshaft
Tappet (4)
Kit, Retainer (4)
Rotator, Exhaust Valve (2)
Spring, Valve (4)
Valve, Exhaust (2)
Valve, Intake (2)
Seal, Intake Valve Stem (2)
Retainer, intake Valve (2)
DESCRIPTION
Pin, Roll
Shaft, Oil Pump
Spacer, Shim
(As Required, Maximum of 2)
Gear, Oil Pump
Rotor Set
Cover, Oil Pump
Screw, Hex Washer Head
#10-32 x 7/16 (4)
NOT ILLUSTRATED
- - 82 522 30
- _ 52 755 94
Short Block
Gasket Set
57
Downloaded from www.Manualslib.com manuals search engine
09
03
10
01
01
05
08
13
OiL PUMP
DESCRIPTION
67
68
11
12
!3
!4
15
DESCRIPTION
KEY PART
NO, NO.
X-75o23
DESCRIPTION
1
2
DESCRIPTION
KEY PART
NO. NO.
OiL FILTER
KEY PART
NO. NO.
58560
52 108 10
Ring Set o010" (2)
52 108 11
Ring Set .020" (2)
52 108 12
Ring Set .030" (2)
LOW OIL PRESSURE SWITCH
OIL PAN
KEY PART
NO. NO.
917.257720
RViCE
OTE
58
Downloaded from www.Manualslib.com manuals search engine
SUGGESTED
SIGHTING
GUIDE
SLOPES
_OUT 0"-
LEVEL
WiTH
ilili_F='-_Troa---------v---ctorOperate your
up and down the face of slopes (not
iii| ,_
greater than 15 ), never across the face. Make turns graduil _
ally to prevent tipping or loss of control. Exercise extreme
_iigi
caution when changing direction on slopes.
'!
HILL,
AL
MODEL NO.
917.257720
18.0 HP IC
ELECTRIC START
44" MOWER
6 SPEED TRANS_LE
GARDEN T RA CTOR
Each tractor has its own model number.
its own model number.
IF YOU NEED
REPAIR SERVICE
OR PARTS:
FOR REPAIR SERVICE, CALL
THIS TOLL FREE NUMBER:
1-800-4-REPAIR
(!-800-473-7247)
TRACTOR
NUMBER
,, PART DESCRIPTION
FOR REPLACEMENT PARTS
INFORMATION AND
ORDERING, CALL THIS
TOLL FREE NUMBER:
1-800-FON-PART
(1-80_66-7278)
140330
Rev,
3.04,94
Printed in U.S.A.