Professional Documents
Culture Documents
InstrumentationFittingsCat PDF
InstrumentationFittingsCat PDF
Single-Ferrule
Instrumentation
Tube Fittings
Interchangeability
Brennan Instrumentation Double-Ferrule
Tube Fittings are manufactured
to be totally interchangeable and fully
component intermixable with the
Swagelok and Parker A-LOK tube
fitting brands.
B r e n n a n
I n d u s t r i e s
Swagelok is a registered trademark of Swagelok Company. A-LOK is a registered trademark and CPITM is a trademark of Parker Hannifin Corporation.
Atlanta Cleveland Dallas
Los Angeles Seattle Shanghai Toronto
Gyrolok is a registered trademark of HOKE Incorporated.
Introduction
Brennans Instrumentation Tube Fittings provide
leak-proof, torque-free seals at all tubing connections. They
eliminate potentially hazardous and expensive leaks in
instrumentation, process, pneumatic, hydraulic, gas and
other tubing systems.
The basic Double-Ferrule Tube Fitting is a four-piece fitting consisting
of the nut, back ferrule, front ferrule and the body. When installed, it
becomes a five-piece connection with the addition of the tubing to
provide a solid leak-free joint.
The two ferrules grasp tightly around the tube with no damage to the
tube wall. Exhaustive tests have proved that the tubing will yield before a
Brennan Double-Ferrule joint starts leaking.
The secret behind the success of the Brennan Double-Ferrule Tube Fitting
lies in the two-ferrule design, which combines geometry and metallurgy.
All action in the fitting is an axial movement along the tube instead of a
rotary motion to create the joint. This axial movement prevents transmission of any torque from a fitting to the tubing. Since there is no initial
strain in the tubing, the making of the joint does not weaken the tubing.
Another advantage of the Brennan Double-Ferrule Tube Fitting is that the
swaging action of the twin ferrules overcomes variations in tubing wall
thickness, hardness and dimensional tolerance.
Brennans Double-Ferrule and Single-Ferrule Tube Fittings are easy to install
and require no special tools. They are reusable several times and can
withstand heavy impulse and vibration in both vacuum and pressure systems.
Performance
Work in vacuums, as well as at low and high pressures
Seal at low cryogenic temperatures, as well as elevated temperatures
rated for the tube
Seal consistently over a wide range of temperature cycling
Seal repeatedly under both make and remake conditions
Resist pressure beyond the tubing burst point
Assembly
Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
Do not require disassembly and inspection of ferrule swaging at every
make-up
Do not require any special tools for assembly
Service
Brennans Tube Fittings are available in a wide range of materials, sizes,
connections and configurations from our local distributors and supported
by substantial inventories at our distribution centers.
B r e n n a n
I n d u s t r i e s
Product Gallery
Plug
N0304
Nut
Pg. 12
Union
N2403
Back Ferrule
N0318
Pg. 12
Reducing Union
Pg. 14
N2403
Pg. 14
N2425
N2426
Port Connector
N2431
N2440
Pg. 20
N2404
Pg. 15
Pg. 20
N2427
Pg. 13
Reducer
N2405
N2406
Pg. 15-16
N2428
Pg. 18
Union Elbow
N2440
N2500
Pg. 20
N2503
N2525
N2526
N2601
Pg. 22
N2603
N2605
Pg. 25-26
Pg. 23
Pg. 27
Bulkhead Female
Connector
N2701-LN
N2705-LN
N2606
Pg. 27
Pg. 29 N2706-LN
Pg. 13
Pg. 18
N2429
Pg. 16 N2408
N2501
N2602
Pg. 21
N2700-LN
N2707-LN
Pg. 30 N2709-LN
I n d u s t r i e s
N2502
Pg. 19
Pg. 22
Union Tee
Pg. 24 N2603
Bulkhead Union
Pg. 28
Pg. 17
Female Elbow
Pg. 24
Pg. 13
Female Adapter
Pg. 19 N2430
Male Elbow
Pg. 21
N2402
Cap
Pg. 25
Pg. 28 N2700-LN
Pg. 30
B r e n n a n
N2650
Cross
Pg. 29
Pg. 23
N0319-S
Female Connector
Male Adapter
Adapter
Pg. 18
Ferrule Set
N0319-F
Pg. 12
Male Connector
Pg. 17
N0319-B
Front Ferrule
Pg. 29
Pg. 31 N6400
Pg. 31
Product Gallery
Positionable Male Elbow
Positionable Male
Branch Tee
Positionable Male
Run Tee
N6801
N6802
N6803
N6804
N7000
N7002
Pg. 32
Pg. 32
Pg. 33
Pg. 33
Pg. 34
Pg. 34
N7202
Pg. 35
Contents
n Interchangeability.................2
n Pre-Setting.............................9
n Brennan Instrumentation
Tube Fittings..........................3
n Brennan Gap
Inspections Gages..............10
n Product Gallery...................4-5
n Tubing Selection....................6
- Tubing Hardness
- Tubing Wall Thickness
- Tubing For Gas Service
- Tubing Handling
n Ordering Codes....................11
n Tubing Specifications...........7
n Single-Ferrule Fittings........36
n Tubing-Working Pressure
Tables..................................7-8
n Instrumentation Valves......37
n Thread Specifications...........8
n Sizing Chart.........................11
n Double-Ferrule Tube
Fittings............................12-35
n Cross Reference
Chart................................38-47
n Assembly................................9
B r e n n a n
I n d u s t r i e s
Tubing Selection
Proper selection, handling and installation of tubing are essential for reliable tubing system performance. While Brennan Industries is not a tubing
manufacturer or supplier, we must stress the importance of carefully selecting high-quality tubing. Proper tubing selection is necessary to ensure
safe and leak-free systems. Brennan Industries is happy to assist in tubing selection upon request.
Tubing selection is based on the material, hardness, wall thickness and surface finish. The ASTM specifications for various tubes cover material,
hardness and wall thickness. They do not give details on the surface finish.
Tubing Hardness
Tubing must always be softer than the fitting material. To achieve leak-free connections, it is important to use the recommended tubing hardness as
explained in the Tubing Specifications section, leak-free connections will be achieved.
The biggest misunderstanding about tubing hardness is in the area of stainless steel tubing. Brennans Stainless Steel Instrumentation Tube Fittings
have been successfully lab tested with tubing hardness up to RB 90, the maximum hardness allowable under ASTM A 213 and A 269.
However, Brennans Instrumentation Tube Fittings will perform optimally and provide the maximum advantage and performance for tubes with
hardnesses below RB 80. It is suggested that, when purchasing stainless steel tubing to ASTM A 213/A 269, you specify that the hardness of the
tubing should not exceed RB 80.
The best results are obtained where the stainless steel tubing hardness is in the range RB 75-80. Such tubing lowers installation costs because it is
more easily bent and installed.
Tubing installers should perform the full 1-1/4 turn after snug-tightening to ensure proper joints. This will provide the best performance and is
especially true in the case of harder tubing where higher torque is required.
Tubing Wall Thickness
The allowable pressure rating of tubing for the wide range of wall thickness is calculated from S values as specified by ANSI Code B 31.1.
The range of tubing wall thicknesses varies from 0.028" to 0.109" in the inch OD series. These wall thicknesses are generally preferred for tube
sizes up to 1". For higher tube sizes, these wall thicknesses may be increased to 0.125 and 0.167".
Tubing For Gas Service
For maximum safety and the prevention of surface defects in any gas system, it is recommended that tubing wall thicknesses are not less than those
shown in this table:
Tube O.D.
Suggested Minimum
Wall Thickness
1/16"
1/8"
1/4"
5/16"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
.028" .028"
.028"
.035
.035
.041
.052
.062
.073
.083
1-1/4" 1-1/2"
.104
.125
2"
.167
Light gases such as helium, hydrogen, nitrogen, etc. have very small molecules, which can escape through even the smallest leak path created by surface
defects on the tubing. As the tube OD increases, so does the likelihood of a scratch or other surface defect interfering with proper sealing.
For the most successful connection for gas service, all installation instructions should be followed carefully and the heavier permissible wall thickness of
tubing should be selected. A heavy wall thickness resists ferrule action more than a thin wall thickness. This allows the ferrules to coin out minor surface
imperfections. A thin wall tube will collapse, offering little resistance to ferrule action during assembly. This reduces the chance of coining out surface defects,
which is essential for gas service.
Tubing Handling
Scratches on tube OD are a potential source of problems in leak-tight tubing systems. Good handling practices can greatly reduce scratches and protect tubing surface finishes.
Tubing should never be dragged out of a tubing rack. Particularly in sizes 3/4" and larger, the weight of the tubing being retrieved is sufficient to gouge the OD
if there are any burrs on the ends of the other tubes in the rack.
Tubing should never be dragged across cement, asphalt, gravel or any other surface, which could scratch the surface and create potential leak paths.
Sharp tube cutters should be maintained and tube ends should always be deburred. This allows easier entrance of the tube into the fitting bore and helps to
assure that the tubing will go all the way through the ferrules without damaging the ferrules sealing edge.
B r e n n a n
I n d u s t r i e s
General Technical
Tubing Specifications
Carbon Steel Tubing
Seamless, soft annealed carbon steel tubing to ASTM A 179, Din 2391 or equivalent. 4-1 safety factor considering tensile strength of 47,000 psi at
room temperature. For higher temperature service, apply the reducing factors for elevated temperature operation as specified in Table 302.3 1A and
304.1.2 of the code for pressure piping in ANSI B31.3.
Recommended tube hardness is RB 72 or less.
The tubing should be suitable for bending and flaring and free of all surface defects and imperfections.
Stainless Steel Tubing
Seamless, annealed 304 or 316 Stainless Steel tubing to ASTM A 269 or A 213 or equivalent is recommended (ERW tubing use is not recommended).
4-1 safety factor considering tensile strength of 75,000 psi at room temperature.
Tube hardness should not exceed RB 80. The preferable hardness range is RB 75-80.
Tubing should be suitable for bending and flaring, and should be free of any surface defects and imperfections. A derating factor must be used for
drawn and welded tubing.
Copper Tubing
Annealed, soft, seamless copper tubing to ASTM B 75 or equivalent. 5-1 safety factor considering tensile strength of 30,000 psi at room
temperature. Maximum hardness of the tubing is not to exceed RB 50. Preferred hardness range is RB 40-45.
Thread Specifications
Brennans connectors have one or more tubing end connections and there are a variety of pipe threads for which Brennans Tube Fittings are
available. Two of the most popular thread connections are the American National Pipe Thread (NPT) and the British Standard Pipe Threads (BSP).
These threads meet the standards of individual countries as well as the codified ISO standards. All Brennan fittings with pipe threads or stud end
threads conform to the specifications below:
American National Pipe Thread (NPT): Reference specification ASA B2.1; 1960
ISO Parallel Pipe Thread (British Standard Pipe Thread): Reference specifications BS 2779, ISO 228/1, DIN 259, JISB 0202, IS 2643
ISO Taper Pipe Thread (British Standard Pipe Taper Thread): Reference specifications BS 21, ISO 7/1, DIN 2999, JIS B0203, IS 554
Unified National Pipe Threads: Reference specifications ASA B1.1; 1964
B r e n n a n
I n d u s t r i e s
General Technical
Assembly
Brennan single- and double-ferrule instrumentation tube fittings are sold fully assembled, fingertightened and ready for immediate use. Disassembly before use can result in dirt or foreign material
getting into the fitting, which can cause leaks. Brennan Tube Fittings are installed in three easy steps:
Step 1
Insert the tubing into the Brennan Tube Fitting. Make sure that the tubing rests firmly on the shoulders
of the fitting and that the nut is snug-tight. In this position, the tube does not rotate by hand.
Step 2
Before tightening the Brennan nut, scribe the nut at the 9 oclock position.
Step 3
While holding the fitting body steady with a backup wrench, tighten the nut 1-1/4 turns*.
Watch the scribe mark and make one complete revolution. Then continue turning to the 12 oclock
position.
* For 1/16", 1/8" and 3/16" size tube fittings, only 3/4 turns from finger-tight is required.
Reassembly Instructions
Insert tube into fitting body and hand tighten. Using wrench, rotate the nut approximately 1/4 turn to
original 1-1/4 turns position. Then snug slightly with wrench.
Pre-Setting
Sometimes, Brennan Tube Fittings must be installed in cramped quarters or overhead. For these applications, it is advantageous to use a preset tool on
the tubing in an open ground level area, thus pre-swaging the ferrules onto the tubing. The tubing is then removed from the pre-setting tool. The tubing
(with nut and pre-swaged ferrules) can now be attached to the fitting merely by following the reassembly instructions.
Step1
Assemble the Brennan nut and ferrules to the pre-swaging tool. Insert the tubing until it bottoms out in the fitting body. Then tighten the nut 1-1/4 turns.
Step 2
Loosen the nut and remove the tubing with the pre-swaged ferrules from the pre-setting tool.
Step 3
The connection can now be made simply by snug-tightening the nut as described in Brennan's easy to follow retightening instructions.
Brennans pre-set tools (series NPST) for all common fractional instrumentation tube fitting sizes are available from stock.
Pre-Set Tool Usage Recommendations
Brennan recommends using manual pre-set tools for " and smaller size tubing and fittings when installations involve a large quantity of fittings or are
in hard-to-reach areas.
For 5/8" and larger tubing sizes, Brennan suggests using a pre-set tool (hydraulic or manual) in all applications in recognition of the heavy wall tubings
intrinsic strength. For these larger tubing size jobs using tubing with a wall thickness of less than 0.065", only a manual Brennan pre-set tool is required.
In applications where the tubing wall thickness is 0.065" and above hydraulically pre-setting of the ferrules onto the tubing is specifically recommended.
B r e n n a n
I n d u s t r i e s
Designator Description
N0304
N0318
N0319-B
N0319-F
N0319-S
N2402
N2403
N2403
N2404
N2405
N2406
N2408
N2425
N2426
N2427
N2428
N2429
N2430
N2431
N2440
N2440
N2500
N2501
N2502
N2503
N2525
N2526
N2601
N2602
N2603
N2603
N2605
N2606
N2650
N2700-LN
N2700-LN
N2701-LN
N2705-LN
N2706-LN
N2707-LN
N2709-LN
N6400
N6801
N6802
N6803
N6804
N7000
N7002
N7202
Plug
Nut
Back Ferrule
Front Ferrule
Ferrule Set
Male Connector (JIC)
Union
Reducing Union
Male Connector
Female Connector
Reducer
Cap
Butt Weld Male Connector
Socket Weld Male Connector
Male Adapter (JIC)
Male Adapter (NPT)
O-Seal Male Adapter
Female Adapter
Female Gage Adapter
Port Connector
Reducing Port Connector
Union Elbow
Male Elbow
Female Elbow
45 Degree Male Elbow
10
B r e n n a n
I n d u s t r i e s
NOTE:
Brennan has a
dynamic Research
& Development
program for the
development of fittings
in different materials,
higher pressures and
temperatures. The
dimensions and
information given
in this catalog are
subject to change
without notice
as a result of
this research and
development.
General Technical
Ordering Codes
Example
N24040404SS
Fitting
Type
(Male
Connector)
Tube
O.D.
in sixteenths
of an inch
1/4" O.D.
Pipe
Size
in sixteenths
of an inch
1/4" NPT
Material
SS = stainless steel, type 316
B = brass
The largest tube end size is first. The smaller tube end or pipe thread size follows.
Additional fitting materials and thread specifications are available upon request.
NOTE: No suffix is required for Carbon Steel fittings.
Sizing Chart
Tube-To-Pipe or
Tube-To-Tube
Size
Tube
Pipe Thread
No.
O.D.
or Tube O.D.
1-1
1/16
1/16
1-2
2-1
2-2
2-4
3-2
3-4
4-2
4-4
4-6
4-8
5-2
5-4
6-2
6-4
6-6
6-8
8-4
8-6
8-8
8-12
10-6
10-8
10-12
12-8
12-12
14-12
14-16
16-12
16-16
20-20
24-24
32-32
1/16
1/8
1/8
1/16
1/8
1/8
1/8
1/4
3/16
1/8
3/16
1/4
1/4
1/8
1/4 1/4
1/4
3/8
1/4
1/2
5/16
1/8
5/16
1/4
3/8
1/8
3/8
1/4
3/8
3/8
3/8
1/2
1/2
1/4
1/2
3/8
1/2
1/2
1/2
3/4
5/8
3/8
5/8
1/2
5/8
3/4
3/4
1/2
3/4
3/4
7/8
3/4
7/8
1
1
3/4
1
1
1-1/4
1-1/4
1-1/2
1-1/2
2
2
I n d u s t r i e s
11
Plug N0304
Part
T Tube
G
No.
OD
A/F
N0304-01
N0304-02
N0304-04
N0304-05
N0304-06
N0304-08
N0304-10
N0304-12
N0304-14
N0304-16
N0304-20
N0304-24
N0304-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
0.31
0.43
0.56
0.63
0.69
0.87
1.00
1.12
1.26
1.50
1.87
2.24
3.00
Nut N0318
Part
T Tube
G
No.
OD
L
A/F
N0318-01
N0318-02
N0318-04
N0318-05
N0318-06
N0318-08
N0318-10
N0318-12
N0318-14
N0318-16
N0318-20
N0318-24
N0318-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
0.33
0.47
0.50
0.53
0.59
0.69
0.69
0.71
0.69
0.85
1.25
1.5
2.07
0.31
0.43
0.56
0.63
0.67
0.87
0.98
1.12
1.26
1.50
1.97
2.24
2.99
12
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
B r e n n a n
I n d u s t r i e s
Part
T Tube
No.
OD
N0319-F-01
N0319-F-02
N0319-F-04
N0319-F-05
N0319-F-06
N0319-F-08
N0319-F-10
N0319-F-12
N0319-F-14
N0319-F-16
N0319-F-20
N0319-F-24
N0319-F-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
Part
T Tube S SAE/MS
E
F
G
No.
OD
MALE
A
C
D
min.
A/F
A/F
H
N2402-01-02
N2402-02-02
N2402-02-04
N2402-04-04
N2402-05-05
N2402-06-04
N2402-06-06
N2402-08-08
N2402-12-12
N2402-16-16
1/16
1/8
1/8
1/4
5/16
3/8
3/8
1/2
3/4
1
1/8
1/8
1/4
1/4
5/16
1/4
3/8
1/2
3/4
1
1.07
1.27
1.38
1.48
1.51
1.56
1.56
1.81
2.10
2.42
0.43
0.60
0.60
0.70
0.73
0.76
0.76
0.86
0.86
1.04
B r e n n a n
0.34
0.50
0.50
0.60
0.64
0.66
0.66
0.90
0.96
1.23
0.05
0.06
0.09
0.17
0.23
0.17
0.28
0.39
0.61
0.84
0.43
0.43
0.50
0.50
0.56
0.62
0.62
0.81
1.12
1.37
I n d u s t r i e s
0.31
0.44
0.44
0.56
0.62
0.69
0.69
0.87
1.12
1.50
0.92
1.01
1.12
1.19
1.22
1.27
1.27
1.41
1.70
1.94
13
Union N2403
Tube x Tube
Part
T Tube E F G
No.
OD
A
C
D
min.
A/F
A/F
H
N2403-01-01
N2403-02-02
N2403-04-04
N2403-05-05
N2403-06-06
N2403-08-08
N2403-10-10
N2403-12-12
N2403-14-14
N2403-16-16
N2403-20-20
N2403-24-24
N2403-32-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
0.99
1.40
1.61
1.69
1.77
2.02
2.05
2.11
2.17
2.55
3.63
4.25
5.88
0.43
0.60
0.70
0.73
0.76
0.86
0.86
0.86
0.86
1.04
1.53
1.78
2.47
0.34
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
1.23
1.62
1.97
2.66
0.05
0.09
0.19
0.25
0.28
0.41
0.50
0.62
0.72
0.88
1.09
1.34
1.81
0.31
0.43
0.56
0.56
0.63
0.81
0.94
1.06
1.19
1.42
1.75
2.16
2.75
0.31
0.43
0.56
0.63
0.67
0.87
0.98
1.12
1.26
1.50
1.97
2.24
3.00
0.69
0.88
1.03
1.11
1.19
1.22
1.25
1.31
1.37
1.59
1.89
2.11
2.94
Part
T Tube
No.
OD
N2403-04-02
N2403-05-02
N2403-05-04
N2403-06-02
N2403-06-04
N2403-08-02
N2403-08-04
N2403-08-06
N2403-10-06
N2403-10-08
N2403-12-04
N2403-12-06
N2403-12-08
N2403-16-08
N2403-16-12
N2403-20-16
N2403-24-20
14
1/4
5/16
5/16
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
1
1
1-1/4
1-1/2
Tx Tube
OD
1/8
1/8
1/4
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/4
3/8
1/2
1/2
3/4
1
1-1/4
Cx
Dx
1.52
1.56
1.66
1.61
1.70
1.78
1.85
1.91
1.94
2.05
1.94
2.00
2.11
2.38
2.38
3.63
2.38
0.70
0.73
0.73
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.53
1.78
0.60
0.60
0.70
0.60
0.70
0.60
0.70
0.76
0.76
0.86
0.70
0.76
0.86
0.86
0.86
1.04
1.53
0.60
0.64
0.64
0.66
0.66
0.90
0.90
0.90
0.96
0.96
0.96
0.96
0.96
1.23
1.23
1.62
1.97
0.50
0.50
0.60
0.50
0.60
0.50
0.60
0.66
0.66
0.90
0.60
0.66
0.90
0.90
0.96
1.23
1.62
0.09
0.09
0.19
0.09
0.19
0.09
0.19
0.28
0.28
0.41
0.19
0.28
0.41
0.41
0.62
0.88
1.08
0.56
0.56
0.56
0.63
0.63
0.81
0.81
0.81
0.94
0.94
1.06
1.06
1.06
1.42
1.42
1.81
2.17
0.56
0.63
0.63
0.69
0.69
0.87
0.87
0.87
1.00
1.00
1.12
1.12
1.12
1.50
1.50
1.97
2.24
B r e n n a n
I n d u s t r i e s
Gx H
0.44
0.44
0.56
0.44
0.56
0.44
0.56
0.69
0.69
0.87
0.56
0.69
0.87
0.87
1.12
1.50
1.97
0.97
1.01
1.08
1.06
1.12
1.12
1.16
1.22
1.25
1.25
1.25
1.31
1.31
1.50
1.50
1.89
2.11
Part
T Tube
No.
OD
P NPT
E
F
G
Male
A
B
C
D
min.
A/F
A/F
N2404-01-01
N2404-01-02
N2404-02-02
N2404-02-04
N2404-04-02
N2404-04-04
N2404-04-06
N2404-04-08
N2404-05-04
N2404-06-02
N2404-06-04
N2404-06-06
N2404-06-08
N2404-08-04
N2404-08-06
N2404-08-08
N2404-08-12
N2404-08-16
N2404-10-06
N2404-10-08
N2404-12-08
N2404-12-12
N2404-12-16
N2404-14-12
N2404-16-08
N2404-16-12
N2404-16-16
N2404-20-16
N2404-20-20
N2404-24-24
N2404-32-32
1/16
1/8
1/8
1/4
1/8
1/4
3/8
1/2
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
3/8
1/2
1/2
3/4
1
3/4
1/2
3/4
1
1
1-1/4
1-1/2
2
1/16
1/16
1/8
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
7/8
1
1
1
1-1/4
1-1/4
1-1/2
2
0.94
1.03
1.20
1.40
1.29
1.49
1.51
1.76
1.52
1.39
1.57
1.57
1.82
1.71
1.71
1.93
1.99
2.25
1.74
1.93
1.99
1.99
2.25
1.99
2.26
2.26
2.45
3.04
3.04
3.50
4.47
0.38
0.38
0.38
0.56
0.38
0.56
0.56
0.75
0.56
0.38
0.56
0.56
0.75
0.56
0.56
0.75
0.75
0.94
0.56
0.75
0.75
0.75
0.94
0.75
0.75
0.75
0.94
0.94
0.94
1.03
1.06
0.43
0.43
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.04
1.53
1.53
1.78
2.47
0.34
0.34
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
0.96
1.02
1.23
1.23
1.23
1.62
1.62
1.97
2.66
0.05
0.05
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.19
0.28
0.28
0.28
0.28
0.38
0.41
0.41
0.41
0.38
0.47
0.47
0.62
0.62
0.62
0.47
0.62
0.88
0.88
1.09
1.34
1.81
0.31
0.43
0.43
0.56
0.56
0.56
0.75
0.87
0.56
0.63
0.63
0.75
0.87
0.81
0.81
0.87
1.06
1.42
0.94
0.94
1.06
1.06
1.42
1.18
1.42
1.42
1.42
1.81
1.81
2.17
2.76
0.31
0.31
0.43
0.43
0.56
0.56
0.56
0.56
0.63
0.67
0.67
0.67
0.67
0.87
0.87
0.87
0.87
0.87
0.98
0.98
1.12
1.12
1.12
1.26
1.50
1.50
1.50
1.97
1.97
2.24
3.0
H
0.79
0.88
0.94
1.14
1.00
1.20
1.22
1.47
1.23
1.10
1.28
1.28
1.53
1.31
1.31
1.53
1.59
1.85
1.34
1.53
1.59
1.59
1.85
1.59
1.78
1.78
1.97
2.17
2.17
2.43
3.00
Bored-Through Connectors available in all of these sizes. Add suffix BT to the above part numbers to designate bored-through male connector.
1/16
1/16
1/8
1/8
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
P NPT
E
F
G
Female
A
B
C
D
min.
A/F
A/F
1/16
1/8
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
0.93
0.96
1.13
1.32
1.23
1.41
1.48
1.67
1.26
1.45
1.29
1.48
1.54
1.73
1.59
0.38
0.41
0.41
0.59
0.41
0.59
0.59
0.78
0.41
0.59
0.41
0.59
0.59
0.78
0.59
B r e n n a n
0.43
0.43
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.73
0.76
0.76
0.76
0.76
0.86
0.34
0.34
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.66
0.90
0.05
0.05
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.25
0.28
0.28
0.28
0.28
0.41
I n d u s t r i e s
0.43
0.56
0.56
0.75
0.56
0.75
0.87
1.06
0.56
0.75
0.63
0.75
0.87
1.06
0.81
0.31
0.31
0.43
0.43
0.56
0.56
0.56
0.56
0.63
0.63
0.67
0.67
0.67
0.67
0.87
H
0.78
0.81
0.87
1.06
0.94
1.12
1.19
1.38
0.97
1.16
1.00
1.19
1.25
1.44
1.19
15
Female Connector
N2405 Continued
Tube x Female NPT Threads
Part
T Tube
No.
OD
N2405-08-06
N2405-08-08
N2405-08-12
N2405-10-06
N2405-10-08
N2405-12-08
N2405-12-12
N2405-14-12
N2405-16-12
N2405-16-12
N2405-20-20
N2405-24-24
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
1
1
1-1/4
1-1/2
P NPT
Female
3/8
1/2
3/4
3/8
1/2
1/2
3/4
3/4
3/4
1
1-1/4
1-1/2
E
F
G
A
B
C
D
min.
A/F
A/F
1.65
1.84
1.90
1.65
1.84
1.84
1.90
1.96
2.10
2.45
2.94
3.28
0.59
0.78
0.81
0.59
0.78
0.78
0.81
0.81
0.81
1.00
1.00
1.09
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.53
1.78
0.90
0.90
0.90
0.96
0.96
0.96
0.96
1.02
1.23
1.23
1.62
1.97
0.41
0.41
0.41
0.50
0.50
0.62
0.62
0.72
0.88
0.88
1.09
1.34
0.87
1.06
1.26
0.94
1.06
1.06
1.42
1.42
1.42
1.61
2.17
2.36
0.87
0.87
0.87
0.98
0.98
1.12
1.12
1.26
1.50
1.50
1.97
2.24
H
1.25
1.44
1.50
1.25
1.44
1.44
1.50
1.56
1.62
1.97
2.07
2.21
Reducer N2406
Tube x Machined Tube Stub
Part
T Tube
Tx Tube
E
F
G
No.
OD
OD
A
C
D
min.
A/F
A/F
H
N2406-02-02
N2406-02-04
N2406-04-02
N2406-04-04
N2406-04-06
N2406-04-08
N2406-05-06
N2406-05-08
N2406-06-04
N2406-06-06
N2406-06-08
N2406-08-04
N2406-08-06
N2406-08-08
N2406-08-12
N2406-08-16
N2406-10-12
N2406-10-14
N2406-12-08
N2406-12-16
N2406-16-20
N2406-16-24
16
1/8
1/8
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
1
1
1/8
1/4
1/8
1/4
3/8
1/2
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
3/4
7/8
1/2
1
1-1/4
1-1/2
1.32
1.42
1.45
1.54
1.60
1.82
1.65
1.87
1.63
1.70
1.91
1.77
1.84
2.06
2.12
2.37
2.15
2.21
2.15
2.46
3.17
3.51
B r e n n a n
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.73
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
1.23
1.23
0.08
0.09
0.08
0.19
0.19
0.19
0.25
0.25
0.19
0.28
0.28
0.19
0.28
0.39
0.41
0.41
0.50
0.50
0.39
0.62
0.88
0.88
I n d u s t r i e s
0.43
0.43
0.56
0.56
0.56
0.56
0.56
0.56
0.63
0.63
0.63
0.87
0.87
0.87
0.87
1.06
0.94
0.94
1.06
1.06
1.38
1.62
0.43
0.43
0.56
0.56
0.56
0.56
0.63
0.63
0.67
0.67
0.67
0.87
0.87
0.87
0.87
0.87
0.98
0.98
1.12
1.12
1.50
1.50
1.06
1.16
1.16
1.25
1.31
1.53
1.36
1.58
1.34
1.41
1.62
1.37
1.44
1.66
1.72
1.97
1.75
1.81
1.75
2.06
2.69
3.03
Part
T Tube
F
G
No.
OD
A
C
D
A/F
A/F
H
N2408-01
N2408-02
N2408-04
N2408-05
N2408-06
N2408-08
N2408-10
N2408-12
N2408-14
N2408-16
N2408-20
N2408-24
N2408-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
0.59
0.79
0.92
0.96
1.01
1.15
1.18
1.24
1.34
1.51
2.10
2.54
3.41
0.43
0.60
0.70
0.73
0.76
0.86
0.86
0.86
0.86
1.04
1.53
1.78
2.47
0.34
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
1.23
1.62
1.97
2.66
0.43
0.43
0.56
0.63
0.67
0.87
0.94
1.06
1.42
1.42
1.81
2.17
2.76
0.31
0.43
0.56
0.63
0.67
0.87
0.98
1.12
1.26
1.50
1.97
2.24
3.00
0.44
0.53
0.63
0.67
0.72
0.75
0.78
0.84
0.94
1.03
1.23
1.47
1.94
Part
T Tube Pipe Weld
No.
OD
Male
N2425-02-02
N2425-04-02
N2425-04-04
N2425-05-02
N2425-05-04
N2425-06-04
N2425-06-06
N2425-06-08
N2425-08-06
N2425-08-08
N2425-08-12
N2425-10-08
N2425-12-12
N2425-16-16
N2425-20-205
N2425-24-24
1/8
1/4
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
1
1-1/4
1-1/2
1/8
1/8
1/4
1/8
1/4
1/4
3/8
1/2
3/8
1/2
3/4
1/2
3/4
1
1-1/4
1-1/2
E
F
G
A
B
C
D
min.
A/F
A/F
H
1.20
1.29
1.49
1.34
1.52
1.57
1.57
1.82
1.71
1.93
1.99
1.93
1.99
2.45
3.04
3.50
0.38
0.38
0.56
0.38
0.56
0.56
0.56
0.75
0.56
0.75
0.75
0.75
0.75
0.94
0.94
1.03
B r e n n a n
0.60
0.70
0.70
0.73
0.73
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
1.04
1.53
1.78
0.50
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.90
0.90
0.90
0.96
0.96
1.23
1.62
1.97
0.09
0.19
0.19
0.20
0.25
0.28
0.28
0.28
0.41
0.41
0.41
0.50
0.62
0.88
1.09
1.34
0.43
0.56
0.56
0.56
0.63
0.63
0.67
0.87
0.81
0.87
1.06
0.94
1.06
1.42
1.81
2.17
I n d u s t r i e s
0.43
0.56
0.56
0.63
0.63
0.67
0.67
0.67
0.87
0.87
0.87
0.98
1.12
1.50
1.97
2.36
0.94
1.00
1.20
1.05
1.23
1.28
1.28
1.53
1.31
1.53
1.59
1.53
1.59
1.97
2.17
2.43
J
0.41
0.41
0.54
0.41
0.54
0.54
0.68
0.84
0.68
0.84
1.05
0.84
1.05
1.31
1.66
1.90
17
Part
T Tube
E
F
G
No.
OD A B Bx C D min.
A/F
A/F H J
N2426-02-02
N2426-04-04
N2426-06-06
N2426-08-08
N2426-12-12
N2426-16-16
N2426-20-20
N2426-24-24
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
1.14
1.32
1.48
1.62
1.71
2.07
2.85
3.22
0.34
0.41
0.47
0.47
0.47
0.56
0.75
0.75
0.25
0.31
0.38
0.50
0.56
0.75
0.75
0.94
0.60
0.70
0.76
0.86
0.86
1.04
1.53
1.78
0.50
0.60
0.66
0.90
0.96
1.23
1.62
1.97
0.09
0.19
0.28
0.41
0.62
0.88
1.09
1.34
0.43
0.56
0.63
0.87
1.06
1.42
1.77
2.17
0.43
0.56
0.67
0.87
1.12
1.50
1.97
2.24
0.90
1.03
1.19
1.22
1.31
1.59
1.98
2.15
0.31
0.44
0.62
0.75
1.05
1.31
1.65
1.97
T Tube
OD
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
Flare
A
B
Size
E
min.
F
A/F
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
0.16
0.28
0.39
0.59
0.25
1.07
1.31
0.50
0.63
0.81
1.13
1.42
1.81
2.00
1.50
1.56
1.90
2.20
1.87
3.16
3.70
0.55
0.55
0.66
0.86
0.91
0.96
1.08
Part
T Tube
P NPT
E
F
No.
OD
Male
A
B
min.
A/F
N2428-02-02
N2428-02-04
N2428-04-02
N2428-04-04
N2428-04-06
N2428-04-08
N2428-05-04
N2428-06-04
N2428-06-06
N2428-06-08
N2428-08-04
N2428-08-06
N2428-08-08
N2428-10-08
N2428-12-08
N2428-12-12
N2428-16-12
N2428-16-16
N2428-20-20
N2428-24-24
18
1/8
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
1-1/4
1-1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
3/4
3/4
1
1-1/4
1-1/2
B r e n n a n
29.5
34.8
31.8
37.0
37.8
43.4
38.1
38.9
39.6
45.2
44.5
45.2
50.8
52.3
52.3
52.3
58.7
66.0
80.3
94.5
9.6
14.3
9.6
14.3
14.3
19.1
14.3
14.3
14.3
19.1
14.3
14.3
19.1
19.1
19.1
19.1
19.1
23.8
23.8
26.2
I n d u s t r i e s
2.3
2.3
4.8
4.8
4.8
4.8
6.4
7.1
7.1
7.1
7.1
9.9
9.9
11.9
11.9
15.0
15.7
20.3
27.6
33.2
11
14
11
14
19
22
14
14
19
22
14
19
22
22
22
27
27
36
45
55
Part
T Tube
S-SAE/MS
E
Fd
O Ring*
No.
Male
Male
A
B
min.
F
A/F
Part No.
N2429-02-02
N2429-04-04
N2429-05-05
N2429-06-06
N2429-08-08
N2429-12-12
N2429-16-16
N2429-20-20
N2429-24-24
5/16-24
7/16-24
1/2-24
9/16-24
3/4-24
1-1/16-12
1-5/16-12
1-5/8-12
1-7/8-12
1/8
1/4
5/16
3/8
1/2
3/4
1
1-1/4
1-1/2
32.5
39.2
41.7
43.2
49.5
55.0
62.5
79.5
92.2
8.6
10.4
11.2
12.0
12.0
14.3
14.3
18.3
19.8
2.4
4.8
6.3
7.1
9.9
15.0
19.8
27.4
33.3
14
19
22
24
27
38
45
55
60
13.8
18.8
21.8
23.6
26.8
37.8
44.0
54.0
58.0
4001-01
4001-02
4001-03
4001-04
4001-06
4001-12
4001-16
4001-20
4001-24
Female Adapter
N2430
Part
T Tube
P NPT
E
F
No.
OD
Female
A
B
min.
A/F
N2430-02-02
N2430-02-04
N2430-04-02
N2430-04-04
N2430-04-06
N2430-04-08
N2430-05-04
N2430-06-04
N2430-06-06
N2430-06-08
N2430-08-04
N2430-08-06
N2430-08-08
N2430-10-08
N2430-12-08
N2430-12-12
N2430-12-16
N2430-16-12
N2430-16-16
N2430-20-20
N2430-24-24
1/8
1/4
1/8
1/4
3/8
1/2
1/4
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
3/4
1
3/4
1
1-1/4
1-1/2
1/8
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
3/4
1
1
1-1/4
1-1/2
B r e n n a n
1.24
1.39
1.30
1.46
1.55
1.79
1.48
1.50
1.59
1.84
1.71
1.79
2.04
2.09
2.08
2.08
2.30
2.39
2.53
3.06
3.50
0.41
0.59
0.41
0.59
0.59
0.78
0.59
0.59
0.59
0.78
0.59
0.59
0.78
0.78
0.78
0.81
1.00
0.81
1.00
1.00
1.09
I n d u s t r i e s
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.28
0.28
0.28
0.39
0.39
0.39
0.50
0.59
0.59
0.59
0.80
0.80
1.09
1.31
0.56
0.75
0.56
0.75
0.87
1.06
0.75
0.75
0.87
1.06
0.75
0.87
1.06
1.06
1.06
1.42
1.61
1.42
1.61
2.17
2.36
19
Female Gage
Adapter N2431
Part
T Tube
P ISO
E
F
No.
OD
Female
A B min.
A/F a2 d4 b t2
N2431-04-04
N2431-06-06
N2431-08-08
1/4
3/8
1/2
1/4
3/8
1/2
1.39
1.55
1.80
0.51
0.56
0.74
0.19
0.26
0.28
0.75
0.94
1.06
0.06
0.06
0.06
0.22
-
-
0.37
0.39
0.57
0.67
-
No seal is made around the male thread. Instead, a gasket is dropped into the flat bottom in the female thread, and the end of the male threaded end exerts a load on
the gasket to seal.
Port Connector
N2440
Part
T Tube
E
No.
OD
min.
H
N2440-01-01
N2440-02-02
N2440-04-04
N2440-05-05
N2440-06-06
N2440-08-08
N2440-12-12
N2440-16-16
1/16
1/8
1/4
5/16
3/8
1/2
3/4
1
0.03
0.09
0.19
0.25
0.30
0.39
0.59
0.80
0.54
0.88
0.97
1.02
1.03
1.41
1.47
1.89
Reducing Port
Connector N2440
Part
T Tube
Tx Tube
No.
OD
OD
E
H
N2440-02-01
N2440-04-01
N2440-04-02
N2440-06-02
N2440-06-04
N2440-08-04
N2440-08-06
N2440-12-08
N2440-16-08
N2440-16-12
20
1/16
1/8
1/4
3/8
3/8
1/2
1/2
3/4
1
1
B r e n n a n
1/16
1/16
1/8
1/8
1/4
1/4
3/8
1/2
1/2
3/4
0.03
0.03
0.09
0.09
0.19
0.19
0.28
0.39
0.39
0.59
I n d u s t r i e s
0.68
0.71
0.89
0.91
0.98
1.15
1.20
1.49
1.68
1.71
Part
T Tube E F
No.
OD
A
C
D
min.
A/F
G
Hx
N2500-01-01
N2500-02-02
N2500-04-04
N2500-05-05
N2500-06-06
N2500-08-08
N2500-10-10
N2500-12-12
N2500-14-14
N2500-16-16
N2500-20-20
N2500-24-24
N2500-32-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
0.70
0.88
1.06
1.13
1.20
1.42
1.50
1.57
1.76
1.93
2.62
3.07
4.22
0.43
0.60
0.70
0.73
0.76
0.86
0.86
0.86
0.86
1.04
1.53
1.78
2.47
0.34
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
1.23
1.62
1.97
2.66
0.05
0.09
0.19
0.25
0.28
0.41
0.50
0.62
0.72
0.88
1.09
1.34
1.81
0.43
0.43
0.55
0.63
0.67
0.81
0.94
1.06
1.42
1.42
1.81
2.17
2.76
0.31
0.43
0.56
0.63
0.67
0.87
0.98
1.12
1.26
1.50
1.97
2.24
3.00
0.55
0.62
0.77
0.84
0.91
1.02
1.10
1.17
1.36
1.45
1.75
2.00
2.75
Part
T Tube P NPT
E
F
G
No.
OD
Male
A
B
C
D
min.
A/F
A/F
Hx
Hy
N2501-01-01
N2501-01-02
N2501-02-02
N2501-02-04
N2501-04-02
N2501-04-04
N2501-04-06
N2501-04-08
N2501-05-04
N2501-06-02
N2501-06-04
N2501-06-06
N2501-06-08
N2501-08-04
N2501-08-06
N2501-08-08
N2501-08-12
N2501-10-08
N2501-12-08
N2501-12-12
N2501-14-12
N2501-16-12
N2501-16-16
N2501-20-20
N2501-24-24
N2501-32-32
0.70
0.70
0.70
0.92
0.74
0.92
1.03
1.30
0.96
0.82
1.00
1.03
1.30
1.11
1.11
1.30
1.45
1.38
1.45
1.45
1.64
1.64
1.83
1.88
2.38
2.78
1/16
1/16
1/8
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
3/4
3/4
7/8
1
1
1-1/4
1-1/2
2
1/16
1/8
1/8
1/4
1/8
1/4
3/8
1/2
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/2
1/2
3/4
3/4
3/4
1
1-1/4
1-1/2
2
0.75
0.75
0.93
0.97
1.06
1.06
1.17
1.25
1.13
1.20
1.20
1.23
1.31
1.42
1.42
1.42
1.57
1.50
1.57
1.57
1.76
1.93
1.93
2.62
3.07
4.22
0.38
0.38
0.38
0.56
0.38
0.56
0.56
0.75
0.56
0.38
0.56
0.56
0.75
0.56
0.56
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.94
0.94
1.06
1.06
B r e n n a n
0.43
0.43
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.53
1.78
2.47
0.34
0.34
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
1.02
1.23
1.23
1.62
1.97
2.66
0.05
0.05
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.19
0.28
0.28
0.28
0.28
0.38
0.41
0.41
0.47
0.47
0.62
0.62
0.62
0.88
1.09
1.34
1.81
0.43
0.43
0.43
0.55
0.55
0.55
0.75
0.87
0.55
0.55
0.67
0.75
0.87
0.81
0.81
0.87
1.06
0.94
1.06
1.06
1.42
1.42
1.42
1.81
2.17
2.76
I n d u s t r i e s
0.43
0.43
0.43
0.43
0.55
0.55
0.55
0.55
0.63
0.67
0.67
0.67
0.67
0.87
0.87
0.87
0.87
0.98
1.12
1.12
1.26
1.50
1.50
1.97
2.24
2.99
0.60
0.60
0.67
0.71
0.77
0.77
0.88
0.96
0.84
0.91
0.91
0.94
1.02
1.02
1.02
1.02
1.17
1.10
1.17
1.17
1.36
1.45
1.45
1.75
2.00
2.75
21
Part
T Tube
P NPT
E
F
G
No.
OD
Female
A B C D
min.
A/F
A/F
Hx Hy
N2502-02-02
N2502-02-04
N2502-04-02
N2502-04-04
N2502-04-06
N2502-04-08
N2502-05-02
N2502-05-04
N2502-06-02
N2502-06-04
N2502-06-06
N2502-06-08
N2502-08-04
N2502-08-06
N2502-08-08
N2502-10-06
N2502-10-08
N2502-12-08
N2502-12-12
N2502-14-12
N2502-16-12
N2502-16-16
1/8
1/8
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
1
1
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
3/4
3/4
3/4
1
0.97
1.08
1.06
1.17
1.25
1.36
1.13
1.20
1.20
1.23
1.31
1.42
1.42
1.42
1.53
1.50
1.57
1.57
1.76
1.76
1.93
2.11
0.41
0.59
0.41
0.59
0.59
0.78
0.41
0.59
0.41
0.59
0.59
0.78
0.59
0.59
0.78
0.59
0.78
0.78
0.81
0.81
0.81
1.00
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.73
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
1.02
1.23
1.23
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.25
0.28
0.28
0.28
0.28
0.41
0.41
0.41
0.50
0.50
0.62
0.62
0.72
0.88
0.88
0.55
0.75
0.55
0.75
0.87
1.06
0.75
0.87
0.67
0.75
0.87
1.06
0.87
0.87
1.06
0.94
1.06
1.06
1.42
1.42
1.42
1.61
0.43
0.43
0.56
0.56
0.56
0.56
0.56
0.63
0.67
0.67
0.67
0.67
0.87
0.87
0.87
0.87
0.98
1.12
1.12
1.26
1.50
1.50
0.71
0.82
0.77
0.88
0.96
1.07
0.84
0.91
0.91
0.94
1.02
1.13
1.02
1.02
1.13
1.10
1.17
1.17
1.36
1.36
1.45
1.63
0.75
0.88
0.75
0.88
0.88
1.12
0.75
0.88
0.75
0.88
0.88
1.12
0.88
0.88
1.12
0.88
1.12
1.12
1.25
1.25
1.25
1.50
45 Male Elbow
N2503
Tube x Male NPT Threads
Part
T Tube
P NPT
No.
OD
Male
N2503-04-02
N2503-04-04
N2503-06-02
N2503-06-04
N2503-06-06
N2503-08-06
N2503-08-08
N2503-12-12
N2503-16-16
22
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/4
1
1/8
1/4
1/8
1/4
3/8
3/8
1/2
3/4
1
E
F
G
A
B
C
D
min.
A/F
A/F
Hx
0.97
0.97
1.10
1.10
1.15
1.26
1.26
1.34
1.59
0.38
0.56
0.38
0.56
0.56
0.56
0.75
0.75
0.94
B r e n n a n
0.70
0.70
0.76
0.76
0.76
0.86
0.86
0.86
1.04
0.60
0.60
0.66
0.66
0.66
0.90
0.90
0.96
1.23
0.19
0.19
0.19
0.28
0.28
0.38
0.41
0.62
0.88
0.55
0.55
0.67
0.67
0.75
0.87
0.87
1.06
1.42
I n d u s t r i e s
0.56
0.56
0.67
0.67
0.67
0.87
0.87
1.12
1.50
0.68
0.68
0.81
0.81
0.86
0.86
0.86
0.94
1.11
Hy
0.65
0.83
0.72
0.90
0.95
0.95
1.14
1.22
1.49
Part
T Tube Pipe Weld
E
F
G
No.
OD
Male
A B C D
min.
A/F
A/F
Hx
Hy J
N2525-04-02
N2525-04-04
N2525-06-04
N2525-08-08
N2525-12-12
N2525-16-16
N2525-20-20
N2525-24-24
1/4
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
1/8
1/4
1/4
1/2
3/4
1
1-1/4
1-1/2
1.06
1.06
1.20
1.42
1.57
1.93
2.62
3.07
0.38
0.56
0.56
0.75
0.75
0.94
0.94
1.03
0.70
0.70
0.76
0.86
0.86
1.04
1.53
1.78
0.60
0.60
0.66
0.90
0.96
1.23
1.62
1.97
0.19
0.19
0.28
0.41
0.62
0.88
1.09
1.34
0.56
0.56
0.63
0.87
1.06
1.42
1.77
2.17
0.56
0.56
0.67
0.87
1.12
1.50
1.97
2.24
0.77
0.77
0.91
1.02
1.16
1.45
1.75
2.00
0.74
0.92
1.02
1.30
1.45
1.83
1.88
2.38
0.41
0.54
0.54
0.84
1.05
1.31
1.66
1.90
Part
T Tube
No.
OD
A
E
F
G
Bx
C
D
min.
A/F
A/F
Hx
Hy
N2526-04-04
N2526-06-06
N2526-08-08
N2526-12-12
N2526-16-16
N2526-20-20
N2526-24-24
0.31
0.38
0.50
0.56
0.75
0.75
0.94
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
1.06
1.20
1.42
1.57
1.93
2.62
3.07
0.70
0.76
0.86
0.86
1.04
1.53
1.78
B r e n n a n
0.60
0.66
0.90
0.96
1.23
1.62
1.97
0.19
0.28
0.41
0.62
0.88
1.09
1.34
0.55
0.63
0.87
1.06
1.42
1.77
1.97
0.56
0.67
0.87
1.12
1.50
1.97
2.24
I n d u s t r i e s
0.77
0.91
1.02
1.17
1.45
1.75
2.00
0.77
0.91
1.02
1.17
1.45
1.88
2.38
K
0.50
0.62
0.81
1.06
1.38
1.69
1.89
23
Part
T Tube P NPT
E
G
H
No.
OD
Male A Ax B C D min. F A/F A/F Hx Hy
N2601-02-02-02
N2601-02-02-04
N2601-04-04-02
N2601-04-04-04
N2601-04-04-06
N2601-04-04-08
N2601-06-06-04
N2601-06-06-06
N2601-06-06-08
N2601-08-08-04
N2601-08-08-06
N2601-08-08-08
N2601-10-10-08
N2601-12-12-08
N2601-12-12-12
N2601-16-16-12
N2601-16-16-16
N2601-20-20-20
N2601-24-24-24
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
1-1/4
1-1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
3/4
3/4
1
1-1/4
1-1/2
1.86
1.94
2.12
2.12
2.34
2.50
2.40
2.45
2.60
2.83
2.84
2.84
3.06
3.14
3.14
3.86
3.86
5.24
6.14
0.93
0.97
1.06
1.06
1.17
1.25
1.20
1.23
1.30
1.42
1.42
1.42
1.53
1.57
1.57
1.93
1.93
2.62
3.07
0.38
0.56
0.38
0.56
0.56
0.75
0.56
0.56
0.75
0.56
0.56
0.75
0.75
0.75
0.75
0.75
0.94
0.94
1.03
0.60
0.60
0.70
0.70
0.70
0.70
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.53
1.78
0.50
0.50
0.60
0.60
0.60
0.60
0.66
0.66
0.66
0.90
0.90
0.90
0.96
0.96
0.96
1.23
1.23
1.62
1.97
0.09
0.09
0.19
0.19
0.19
0.19
0.28
0.28
0.28
0.19
0.38
0.41
0.47
0.47
0.62
0.62
0.88
1.09
1.34
0.43
0.56
0.56
0.56
0.75
0.87
0.67
0.75
0.87
0.81
0.81
0.87
0.87
1.06
1.06
1.42
1.42
1.81
2.17
0.43
0.43
0.56
0.56
0.56
0.56
0.67
0.67
0.67
0.87
0.87
0.87
0.98
1.12
1.12
1.50
1.50
1.97
2.24
1.34
1.42
1.54
1.54
1.76
1.76
1.82
1.88
2.04
2.04
2.04
2.04
2.26
2.34
2.34
2.90
2.90
3.50
4.00
0.67
0.71
0.77
0.77
0.88
0.96
0.91
0.99
1.02
1.02
1.02
1.02
1.13
1.17
1.17
1.45
1.45
1.75
2.00
0.70
0.92
0.74
0.92
1.03
1.30
1.00
1.03
1.30
1.11
1.11
1.30
1.41
1.45
1.45
1.64
1.83
1.87
2.38
Female Branch
Tee N2602
Tube x Tube x Female NPT Threads
Part
T Tube P NPT
E
F
G
No.
OD
Female
A Ax B C D min.
A/F
A/F H Hx Hy
N2602-02-02-02
N2602-04-04-02
N2602-04-04-04
N2602-06-06-04
N2602-06-06-06
N2602-08-08-06
N2602-08-08-08
N2602-12-12-12
N2602-16-16-12
N2602-16-16-16
24
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1
1/8
1/8
1/4
1/4
3/8
3/8
1/2
3/4
3/4
1
1.94
2.12
2.34
2.46
2.62
2.83
3.06
3.52
3.86
4.22
0.97
1.06
1.17
1.23
1.31
1.42
1.53
1.76
1.93
2.11
0.41
0.41
0.59
0.59
0.59
0.59
0.78
0.81
0.81
1.00
B r e n n a n
0.60
0.70
0.70
0.76
0.76
0.86
0.86
0.86
1.04
1.04
0.50
0.60
0.60
0.66
0.66
0.90
0.90
0.96
1.23
1.23
0.09
0.19
0.19
0.28
0.28
0.41
0.41
0.62
0.88
0.88
0.56
0.56
0.75
0.63
0.87
0.87
1.06
1.42
1.42
1.61
I n d u s t r i e s
0.43
0.56
0.56
0.63
0.63
0.87
0.87
0.87
0.98
1.50
1.42
1.54
1.76
1.88
2.04
2.04
2.26
2.72
2.90
3.26
0.71
0.77
0.88
0.94
1.02
1.02
1.13
1.36
1.45
1.63
0.75
0.75
0.88
0.88
0.88
0.88
1.12
1.25
1.25
1.50
Part
T Tube
E
F
G
No.
OD A Ax C D min. A/F A/F H Hx
N2603-01-01-01
N2603-02-02-02
N2603-04-04-04
N2603-05-05-05
N2603-06-06-06
N2603-08-08-08
N2603-10-10-10
N2603-12-12-12
N2603-14-14-14
N2603-16-16-16
N2603-20-20-20
N2603-24-24-24
N2603-32-32-32
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
1-1/2
2
1.40
1.76
2.12
2.34
2.40
2.84
3.06
3.14
3.52
3.86
5.24
6.14
8.44
0.70
0.88
1.06
1.17
1.20
1.42
1.53
1.57
1.76
1.93
2.62
3.07
4.22
0.43
0.60
0.70
0.73
0.76
0.86
0.86
0.86
0.86
1.04
1.53
1.78
2.47
0.34
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
1.23
1.62
1.97
2.67
0.05
0.09
0.19
0.25
0.28
0.41
0.50
0.62
0.72
0.88
1.09
1.34
1.81
0.43
0.43
0.56
0.63
0.63
0.81
0.94
1.06
1.42
1.42
1.81
2.17
2.76
0.31
0.43
0.56
0.63
0.67
0.87
0.98
1.12
1.26
1.50
1.97
2.24
3.00
1.10
1.24
1.54
1.68
1.83
2.04
2.20
2.34
2.72
2.90
3.50
4.00
5.50
0.55
0.62
0.77
0.84
0.91
1.02
1.10
1.17
1.36
1.45
1.75
2.00
2.75
Reducing Union
Tee N2603
2
3
Part
T Tube Tx Tube
E F
G
Gx
No.
OD OD A Ax Ay C Cx D Dx
min.
A/F A/F
A/F H Hx Hy
N2603-06-06-04
N2603-08-08-04
N2603-08-08-06
N2603-12-12-06
N2603-12-12-08
N2603-16-16-06
N2603-16-16-08
N2603-16-16-12
N2603-20-20-16
N2603-24-24-16
3/8
1/2
1/2
3/4
3/4
1
1
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
3/8
1/2
3/4
1
1
2.40
2.84
2.84
3.14
3.14
3.86
3.86
3.86
5.34
6.20
1.20
1.42
1.42
1.57
1.57
1.93
1.93
1.93
2.67
3.10
1.14
1.25
1.31
1.46
1.57
1.65
1.76
1.76
2.17
2.36
0.76
0.86
0.86
0.86
0.86
1.04
1.04
1.04
1.53
1.78
0.70
0.70
0.76
0.76
0.86
0.76
0.90
0.86
1.04
1.04
0.66
0.90
0.90
0.96
0.96
1.23
1.23
1.23
1.62
1.97
0.60
0.60
0.66
0.66
0.90
0.66
0.86
0.96
1.23
1.23
0.19
0.19
0.28
0.28
0.41
0.28
0.41
0.62
0.88
0.88
0.63
0.81
0.81
1.06
1.06
1.42
1.42
1.42
1.81
2.17
0.67
0.87
0.87
1.12
1.12
1.50
1.50
1.50
1.97
2.24
0.56
0.56
0.67
0.67
0.87
0.67
0.87
1.12
1.50
1.50
1.82
2.04
2.04
2.34
2.34
2.90
2.90
2.90
3.60
4.06
0.91
1.02
1.02
1.17
1.17
1.45
1.45
1.45
1.80
2.03
0.85
0.96
1.02
1.17
1.17
1.36
1.36
1.36
1.69
1.88
I n d u s t r i e s
25
Reducing Union
Tee N2603 Continued
3
Part
T Tube Tx Tube
E F
G
Gx
No.
OD OD A Ax Ay C Cx D Dx min. A/F A/F A/F H Hx Hy
N2603-06-04-06
N2603-08-04-08
N2603-08-06-08
N2603-12-06-12
N2603-12-08-12
N2603-16-06-16
N2603-16-08-16
N2603-16-12-16
N2603-20-16-20
N2603-24-20-24
3/8
1/2
1/2
3/4
3/4
1
1
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
3/8
1/2
3/4
1
1
2.34
2.67
2.73
3.03
3.14
3.89
3.69
3.69
4.71
5.94
1.20
1.42
1.42
1.57
1.57
1.93
1.93
1.93
2.67
3.10
1.14
1.25
1.31
1.46
1.57
1.65
1.76
1.76
2.09
2.87
0.76
0.86
0.86
0.86
0.86
1.04
1.04
1.04
1.53
1.78
0.70
0.70
0.76
0.76
0.86
0.76
0.86
0.86
1.04
1.53
0.66
0.90
0.90
0.96
0.96
1.23
1.23
1.23
1.62
1.97
0.60
0.60
0.66
0.66
0.90
0.66
0.86
0.96
1.23
1.63
0.19
0.19
0.28
0.28
0.41
0.28
0.41
0.62
0.72
1.09
Reducing Union
Tee N2603 Continued
0.63
0.87
0.87
1.06
1.06
1.42
1.42
1.42
1.81
2.17
0.67
0.87
0.87
1.12
1.12
1.50
1.50
1.50
1.97
2.24
0.56
0.56
0.67
0.67
0.87
0.67
0.87
1.12
1.50
1.50
1.76
1.98
2.04
2.34
2.34
2.81
2.81
2.81
3.36
4.00
0.91
1.02
1.02
1.17
1.17
1.45
1.45
1.45
1.80
2.00
0.85
0.96
1.02
1.17
1.17
1.36
1.36
1.36
1.61
2.00
3
Part
T Tube Tx Tube
E F
G
Gx
No.
OD OD A Ax Ay C Cx D Dx
min.
A/F A/F
A/F H Hx Hy
N2603-06-04-04
N2603-08-04-04
N2603-08-06-06
N2603-12-06-06
N2603-12-08-08
N2603-16-06-06
N2603-16-08-08
N2603-16-12-12
N2603-20-16-16
N2603-24-16-16
3/8
1/2
1/2
3/4
3/4
1
1
1
1-1/4
1-1/2
1/4
1/4
3/8
3/8
1/2
3/8
1/2
3/4
1
1
2.34
2.67
2.73
3.03
3.14
3.93
3.69
3.69
4.84
5.46
1.20
1.42
1.42
1.57
1.57
1.57
1.93
1.93
2.67
3.10
1.14
1.25
1.31
1.46
1.57
1.65
1.76
1.76
2.17
2.36
0.76
0.86
0.86
0.86
0.86
1.04
1.04
1.04
1.53
1.76
0.70
0.70
0.76
0.76
0.86
0.76
0.90
0.96
1.04
1.04
0.66
0.90
0.90
0.96
0.96
1.23
1.23
1.23
1.62
1.97
0.60
0.60
0.66
0.66
0.90
0.66
0.86
0.96
1.23
1.23
0.19
0.19
0.28
0.28
0.41
0.28
0.41
0.62
0.88
0.88
0.63
0.81
0.81
1.06
1.06
1.42
1.42
1.42
1.81
2.17
NOTE: The order of the sizes is as per the designation (1-2-3) in figure shown above.
26
B r e n n a n
I n d u s t r i e s
0.67
0.87
0.87
1.12
1.12
1.50
1.50
1.50
1.97
2.24
0.56
0.56
0.67
0.67
0.87
0.67
0.87
1.12
1.50
1.50
1.76
1.98
2.04
2.34
2.34
2.81
2.81
2.81
3.49
3.91
0.91
1.02
1.02
1.17
1.17
1.45
1.45
1.45
1.80
2.03
0.85
0.96
1.02
1.17
1.17
1.36
1.36
1.36
1.69
1.88
Part
T Tube P NPT
E
G H
No.
OD Male A Ax B C D min. F A/F A/F Hx Hy
N2605-02-02-02
N2605-02-04-02
N2605-04-02-04
N2605-04-04-04
N2605-04-06-04
N2605-04-08-04
N2605-06-04-06
N2605-06-06-06
N2605-06-08-06
N2605-08-04-08
N2605-08-06-08
N2605-08-08-08
N2605-10-08-10
N2605-12-08-12
N2605-12-12-12
N2605-16-12-16
N2605-16-16-16
N2605-20-20-20
N2605-24-24-24
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
1-1/4
1-1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
3/4
3/4
1
1-1/4
1-1/2
1.63
1.89
1.80
1.98
2.20
2.55
2.20
2.42
2.60
2.53
2.53
2.72
2.88
3.02
3.02
3.57
3.76
4.49
5.45
0.93
0.97
1.06
1.06
1.17
1.25
1.20
1.31
1.30
1.42
1.42
1.42
1.50
1.57
1.57
1.93
1.93
2.62
3.07
0.38
0.56
0.38
0.56
0.56
0.75
0.56
0.56
0.75
0.56
0.56
0.75
0.75
0.75
0.75
0.75
0.94
0.94
1.03
0.60
0.60
0.70
0.70
0.70
0.70
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.53
1.78
0.50
0.50
0.60
0.60
0.60
0.60
0.66
0.66
0.66
0.90
0.90
0.90
0.96
0.96
0.96
1.23
1.23
1.62
1.97
0.09
0.09
0.19
0.19
0.19
0.19
0.28
0.28
0.28
0.19
0.38
0.41
0.47
0.47
0.62
0.62
0.88
1.09
1.34
0.43
0.56
0.56
0.56
0.75
0.87
0.67
0.75
0.87
0.87
0.81
0.87
0.87
1.06
1.06
1.42
1.42
1.81
2.17
0.43
0.43
0.56
0.56
0.56
0.56
0.67
0.67
0.67
0.87
0.87
0.87
0.98
1.12
1.12
1.50
1.50
1.97
2.24
1.37
1.63
1.51
1.69
1.92
2.26
1.91
2.13
2.32
2.13
2.13
2.32
2.48
2.62
2.62
3.09
3.28
3.63
4.38
0.67
0.71
0.77
0.77
0.88
0.96
0.91
1.02
1.02
1.02
1.02
1.02
1.10
1.17
1.17
1.45
1.45
1.75
2.00
0.70
0.92
0.74
0.92
1.03
1.30
1.00
1.11
1.30
1.11
1.11
1.30
1.38
1.45
1.45
1.64
1.83
1.87
2.38
Part
T Tube P NPT
No.
OD Female
N2606-02-02-02
N2606-04-02-04
N2606-04-04-04
N2606-06-04-06
N2606-06-06-06
N2606-08-06-08
N2606-08-08-08
N2606-12-12-12
N2606-16-12-16
N2606-16-16-16
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1
1/8
1/8
1/4
1/4
3/8
3/8
1/2
3/4
3/4
1
E
F
G
A
Ax
B
C
D
min.
A/F
A/F
1.72
1.81
2.05
2.11
2.19
2.30
2.65
3.01
3.18
3.61
0.97
1.06
1.17
1.23
1.31
1.42
1.57
1.76
1.93
2.11
0.41
0.41
0.59
0.59
0.59
0.59
0.78
0.81
0.81
1.00
B r e n n a n
0.60
0.70
0.70
0.76
0.76
0.86
0.86
0.86
1.04
1.04
0.50
0.60
0.60
0.66
0.66
0.90
0.90
0.96
1.23
1.23
0.09
0.19
0.19
0.28
0.28
0.41
0.41
0.62
0.88
0.88
0.56
0.56
0.75
0.75
0.87
0.87
1.06
1.42
1.42
1.61
I n d u s t r i e s
0.43
0.56
0.56
0.67
0.67
0.87
0.87
1.12
1.50
1.50
Hx
Hy
1.46
1.52
1.76
1.82
1.90
1.90
2.29
2.61
2.70
3.13
0.71
0.77
0.88
0.94
1.02
1.02
1.17
1.36
1.45
1.63
0.75
0.75
0.88
0.88
0.88
0.88
1.12
1.25
1.25
1.50
27
Cross N2650
Tube x Tube x Tube x Tube
Part
T Tube
No.
OD
A
Ax
N2650-02-02-02-02
N2650-04-04-04-04
N2650-06-06-06-06
N2650-08-08-08-08
N2650-12-12-12-12
N2650-16-16-16-16
1/8
1/4
3/8
1/2
3/4
1
1.76
2.12
2.40
2.84
3.14
3.86
E
F
G
C
D
min.
A/F
A/F
H
Hx
0.88
1.06
1.20
1.42
1.57
1.93
0.60
0.70
0.76
0.86
0.86
1.04
0.50
0.60
0.66
0.90
0.96
1.23
0.09
0.19
0.28
0.41
0.62
0.88
0.43
0.56
0.67
0.81
1.06
1.42
0.43
0.56
0.67
0.87
1.12
1.50
1.24
1.54
1.82
2.04
2.34
2.90
0.62
0.77
0.91
1.02
1.17
1.45
NOTE: Reducing Cross with variation in the tube sizes are available. The tube sizes are designated in the order given below.
4
3
The tube sizes are indicated in the part number in the same order above.
Bulkhead Union
N2700-LN
Tube x Tube
Panel
Max.
Part
T Tube
E
F
G
Hole Panel
No.
OD A Ax C D min.
A/F
A/F H Hx
Drill Size
Thickness
N2700-LN-01-01
N2700-LN-02-02
N2700-LN-04-04
N2700-LN-05-05
N2700-LN-06-06
N2700-LN-08-08
N2700-LN-10-10
N2700-LN-12-12
N2700-LN-16-16
N2700-LN-20-20
N2700-LN-24-24
N2700-LN-32-32
28
1/16
1/8
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
1-1/2
2
1.24
2.02
2.27
2.39
2.45
2.80
2.86
3.11
3.77
4.85
5.48
7.10
0.68
1.23
1.32
1.41
1.45
1.65
1.68
1.87
2.26
2.75
3.01
3.69
0.43
0.60
0.70
0.73
0.76
0.86
0.86
0.86
1.04
1.53
1.78
2.47
B r e n n a n
0.34
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.23
1.62
1.97
2.66
0.05
0.09
0.19
0.25
0.28
0.41
0.50
0.63
0.88
1.09
1.34
1.81
0.31
0.43
0.63
0.67
0.75
0.94
1.06
1.18
1.42
1.97
2.36
2.76
0.31
0.43
0.56
0.63
0.67
0.87
0.98
1.12
1.50
1.97
2.24
3.00
0.94
1.50
1.69
1.81
1.87
2.00
2.06
2.31
2.81
3.11
3.34
4.16
I n d u s t r i e s
0.53
0.97
1.03
1.12
1.16
1.25
1.28
1.47
1.78
1.88
1.94
2.22
0.20
0.33
0.45
0.51
0.57
0.77
0.89
1.02
1.33
1.64
1.95
2.64
0.12
0.50
0.40
0.44
0.44
0.50
0.50
0.66
0.75
0.75
0.75
0.75
Panel Max.
Part
T Tube Tx Tube
E
F
G Gx
Hole Panel
No.
OD OD A Ax Cx D Dx min. A/F A/F A/F H Hx
Drill Size
Thickness
N2700-LN-04-02
N2700-LN-06-04
N2700-LN-08-04
N2700-LN-08-06
1/4
3/8
1/2
1/2
1/8
1/4
1/4
3/8
2.17
2.39
2.63
2.63
1.32
1.44
1.65
1.65
0.60
0.70
0.70
0.70
0.60
0.66
0.90
0.88
0.50
0.60
0.60
0.66
0.09
0.19
0.19
0.28
0.63
0.75
0.94
0.94
0.63
0.67
0.87
0.87
0.43
0.56
0.56
0.67
1.62
1.81
1.94
2.00
1.03
1.16
1.25
1.25
0.45
0.57
0.77
0.77
0.40
0.44
0.50
0.50
Bulkhead Union
Elbow N2701-LN
Tube X 90 Tube
Part
T Tube
E
F
G
No.
OD
A
Ax
Ay
C
D
min.
A/F
A/F
H
Hx
Hy
N2701-LN-02-02
N2701-LN-04-04
N2701-LN-06-06
N2701-LN-08-08
N2701-LN-12-12
N2701-LN-16-16
1/8
1/4
3/8
1/2
3/4
1
1.70
1.93
2.13
2.50
2.96
3.61
1.23
1.32
1.45
1.65
1.87
2.26
0.88
1.06
1.20
1.42
1.57
1.93
0.60
0.70
0.76
0.86
0.86
1.04
0.50
0.60
0.66
0.90
0.96
1.23
0.09
0.19
0.28
0.41
0.63
0.88
0.43
0.63
0.87
0.94
1.18
1.42
0.43
0.56
0.67
0.87
1.12
1.50
1.44
1.63
1.84
2.10
2.57
3.13
0.97
1.03
1.16
1.25
1.47
1.78
0.62
0.77
0.91
1.02
1.17
1.45
Panel Max.
Hole Panel
Drill Size Thickness
0.33
0.45
0.57
0.77
1.02
1.33
0.50
0.40
0.44
0.50
0.66
0.75
Bulkhead Female
Connector N2705-LN
Tube x Female NPT Threads
Panel Max.
Part
T Tube P NPT
E
F
G
Hole Panel
No.
OD
Female
A Ax B D min.
A/F A/F H Hx
Drill Size
Thickness
N2705-LN-02-02
N2705-LN-04-02
N2705-LN-04-04
N2705-LN-06-04
N2705-LN-08-06
N2705-LN-08-08
N2705-LN-10-08
N2705-LN-12-08
N2705-LN-12-12
N2705-LN-16-12
N2705-LN-16-16
N2705-LN-20-20
N2705-LN-24-24
1/8
1/4
1/4
3/8
1/2
1/2
5/8
3/4
3/4
1
1
1-1/4
1-1/2
1/8
1/8
1/4
1/4
3/8
1/2
1/2
1/2
3/4
3/4
1
1-1/4
1-1/2
1.76
1.85
2.04
2.17
2.43
2.62
2.66
2.85
2.94
3.32
3.67
4.16
4.51
1.23
1.32
1.32
1.45
1.65
1.65
1.68
1.87
1.87
2.26
2.26
2.75
3.01
0.41
0.41
0.59
0.59
0.59
0.78
0.78
0.78
0.81
0.81
1.00
1.00
1.09
B r e n n a n
0.50
0.60
0.60
0.66
0.90
0.90
0.90
0.96
0.96
1.23
1.23
1.62
1.97
0.09
0.19
0.19
0.28
0.41
0.41
0.50
0.63
0.63
0.63
0.88
1.09
1.34
0.55
0.63
0.75
0.75
0.87
1.06
1.06
1.42
1.42
1.42
1.61
1.97
2.36
0.43
0.56
0.56
0.67
0.87
0.87
0.98
1.12
1.12
1.50
1.50
1.97
2.24
I n d u s t r i e s
1.50
1.56
1.75
1.88
2.03
2.22
2.26
2.45
2.53
2.84
3.19
3.29
3.44
0.97
1.03
1.03
1.16
1.25
1.25
1.28
1.47
1.47
1.78
1.78
1.88
1.94
0.33
0.45
0.45
0.58
0.77
0.77
0.89
1.02
1.02
1.33
1.33
1.64
1.95
0.50
0.40
0.40
0.44
0.50
0.50
0.50
0.66
0.66
0.75
0.75
0.75
0.75
29
Bulkhead Male
Connector N2706-LN
Tube x Male NPT Threads
Part
T Tube P NPT
No.
OD
Male
N2706-LN-02-02
N2706-LN-04-02
N2706-LN-04-04
N2706-LN-06-06
N2706-LN-06-06
N2706-LN-06-08
N2706-LN-08-06
N2706-LN-08-08
N2706-LN-12-12
N2706-LN-16-16
N2706-LN-20-20
N2706-LN-24-24
1/8
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/4
1
1-1/4
1-1/2
1/8
1/8
1/4
1/4
3/8
1/2
3/8
1/2
3/4
1
1-1/4
1-1/2
E
F
G
Ax
B
D
min.
A/F
A/F
H
Hx
1.83
1.95
2.13
2.26
2.26
2.51
2.49
2.71
3.00
3.67
4.35
4.83
1.23
1.32
1.32
1.45
1.45
1.45
1.65
1.65
1.87
2.26
2.85
3.11
0.38
0.38
0.56
0.56
0.56
0.75
0.56
0.75
0.75
0.94
0.94
1.03
0.50
0.60
0.60
0.66
0.66
0.66
0.90
0.90
0.96
1.23
1.62
1.97
0.09
0.19
0.19
0.28
0.28
0.28
0.38
0.41
0.62
0.88
1.09
1.34
0.56
0.63
0.63
0.75
0.75
0.87
0.94
0.94
1.18
1.61
1.97
2.36
0.43
0.56
0.56
0.67
0.67
0.67
0.87
0.87
1.12
1.50
1.97
2.24
1.57
1.66
1.84
1.97
1.97
2.22
2.09
2.31
2.60
3.19
3.44
3.76
0.97
1.03
1.03
1.16
1.16
1.16
1.25
1.25
1.47
1.78
1.95
2.03
Panel Max.
Hole Panel
Drill Size Thickness
0.33
0.45
0.45
0.58
0.58
0.58
0.77
0.77
1.02
1.33
1.67
1.99
0.50
0.40
0.40
0.44
0.44
0.44
0.50
0.50
0.66
0.75
0.75
0.75
30
Part
T Tube S SAE/MS
E
F
G
No.
OD
Male
A
Ax
D
min.
A/F
A/F
H
Hx
N2707-LN-04-04
N2707-LN-06-06
N2707-LN-08-08
N2707-LN-12-12
N2707-LN-16-16
1.03
1.16
1.25
1.47
1.78
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
2.12
2.25
2.59
3.11
3.64
1.32
1.45
1.65
1.87
2.26
B r e n n a n
0.60
0.66
0.90
0.96
1.23
0.17
0.28
0.39
0.61
0.84
0.63
0.75
0.94
1.18
1.61
0.55
0.67
0.87
1.06
1.42
1.83
1.96
2.19
2.71
3.16
I n d u s t r i e s
Panel
Max.
Hole Panel
Drill Size Thickness
0.45
0.58
0.77
1.02
1.33
0.40
0.44
0.50
0.66
0.75
Panel
Max.
Part
T Tube Tx Tube
E
F
G
H
Hole Panel
No.
OD OD A Ax D min. A/F A/F D Hx
Drill Size
Thickness
N2709-LN-02-02
N2709-LN-04-04
N2709-LN-06-06
N2709-LN-08-08
N2709-LN-10-10
N2709-LN-16-16
N2709-LN-20-20
N2709-LN-24-24
1/8
1/4
3/8
1/2
5/8
1
1-1/4
1-1/2
1/8
1/4
3/8
1/2
5/8
1
1-1/4
1-1/2
1.95
2.20
2.41
2.87
2.96
3.95
4.75
5.01
1.23
1.32
1.45
1.65
1.68
2.26
2.75
3.01
0.50
0.60
0.66
0.90
0.96
1.23
1.62
1.97
0.08
0.19
0.28
0.39
0.50
0.80
1.08
1.30
0.43
0.63
0.75
0.94
1.06
1.42
1.97
2.36
0.43
0.56
0.67
0.87
0.98
1.50
1.97
2.36
1.69
1.91
2.12
2.47
2.56
3.47
3.54
3.94
0.97
1.03
1.16
1.25
1.28
1.78
1.88
1.94
0.33
0.45
0.58
0.77
0.89
1.33
1.64
1.95
0.50
0.40
0.44
0.50
0.50
0.75
0.75
0.75
O Seal Male
Connector N6400
Tube x Male MORB Straight Threads
Part
T Tube S-SAE/MS
E
F
G
O Ring*
No.
OD
Thread
A B C D
min.
A/F
A/F
H
Part No.
N6400-02-02-O
N6400-04-04-O
N6400-04-06-O
N6400-04-08-O
N6400-04-10-O
N6400-05-05-O
N6400-06-04-O
N6400-06-06-O
N6400-06-08-O
N6400-06-10-O
N6400-08-06-O
N6400-08-08-O
N6400-08-10-O
N6400-08-12-O
N6400-10-08-O
N6400-10-10-O
N6400-12-08-O
N6400-12-12-O
N6400-14-14-O
N6400-16-12-O
N6400-16-16-O
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
7/8
1
1
5/16-24
7/16-20
9/16-18
3/4-16
7/8-14
1/2-20
7/16-20
9/16-18
3/4-16
7/8-14
9/16-18
3/4-16
7/8-14
1-1/16-12
3/4-16
7/8-14
3/4-16
1-1/16-12
1-3/16-12
1-1/16-12
1-5/16-12
1.18
1.34
1.40
1.48
1.60
1.37
1.40
1.46
1.54
1.66
1.54
1.65
1.77
1.93
1.65
1.78
1.81
1.93
1.93
2.10
2.14
0.30
0.36
0.39
0.44
0.50
0.36
0.36
0.39
0.44
0.50
0.39
0.44
0.50
0.59
0.44
0.50
0.44
0.59
0.59
0.59
0.59
0.60
0.70
0.70
0.70
0.70
0.73
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
0.50
0.60
0.60
0.60
0.60
0.64
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
1.02
1.23
1.23
0.09
0.19
0.19
0.19
0.19
0.25
0.20
0.28
0.28
0.28
0.28
0.41
0.41
0.41
0.42
0.50
0.42
0.62
0.72
0.66
0.88
0.44
0.56
0.69
0.88
1.00
0.63
0.63
0.67
0.88
1.00
0.81
0.87
1.00
1.25
0.94
1.00
1.06
1.26
1.38
1.38
1.50
0.44
0.56
0.56
0.56
0.56
0.63
0.69
0.67
0.69
0.69
0.88
0.87
0.88
0.88
1.00
1.00
1.13
1.12
1.25
1.50
1.50
0.92
1.05
1.11
1.19
1.31
1.08
1.11
1.17
1.25
1.37
1.14
1.25
1.37
1.53
1.25
1.38
1.41
1.53
1.53
1.62
1.66
4001-02
4001-04
4001-06
4001-08
4001-10
4001-05
4001-04
4001-06
4001-08
4001-10
4001-06
4001-08
4001-10
4001-12
4001-08
4001-10
4001-08
4001-12
4001-14
4001-12
4001-16
B r e n n a n
I n d u s t r i e s
31
90 Positionable
Male Elbow N6801
Tube X Male SAE Straight Threads
Part
T Tube SAE/MS
E
Fx
G
O Ring*
No.
OD
Thread
Ax B C D min. F A/F A/F Hx Hy U
Part No.
N6801-04-04-NWO
N6801-04-06-NWO
N6801-06-06-NWO
N6801-06-08-NWO
N6801-08-08-NWO
N6801-10-10-NWO
N6801-12-12-NWO
N6801-14-14-NWO
N6801-16-16-NWO
N6801-20-20-NWO
N6801-24-24-NWO
9.9
11.2
11.2
12.7
12.7
14.3
16.8
16.8
16.8
16.8
16.8
17.8
17.8
19.3
19.3
21.8
21.8
21.8
21.8
26.4
38.9
45.2
15.3
15.3
16.8
16.8
22.9
24.4
24.4
25.9
31.2
41.2
50.0
4.8
4.8
7.1
7.1
10.4
12.7
15.8
18.3
22.3
27.6
34.0
14
16
16
22
22
24
27
30
35
46
50
14
17
17
22
22
25
32
32
35
50
55
14
14
17
17
22
25
28.5
32
38
50
60
21.0
23.1
24.6
27.4
27.4
29.5
31.2
33
38.4
45.7
50.8
28.5
32.3
32.3
37.8
37.8
43.4
48.8
50.5
53.6
58.2
60.4
16.5
20.0
20.0
25.6
25.6
29.5
36.6
40.4
44.0
54.9
62.5
4001-04
4001-06
4001-06
4001-08
4001-08
4001-10
4001-12
4001-14
4001-16
4001-20
4001-24
45 Positionable
Male Elbow N6802
Tube X Male SAE Straight Threads
O Ring*
Part
T Tube P SAE/MS
E
Fx
G Hx
Part
No.
OD Male A B C D min. F A/F A/F A/F Hy U No.
N6802-04-04-NWO
N6802-06-06-NWO
N6802-08-08-NWO
N6802-12-12-NWO
N6802-16-16-NWO
1/4
3/8
1/2
3/4
1
7/16-20
9/16-18
3/4-16
1-1/16-12
1-5/16-12
1.01
1.10
1.26
1.57
1.87
0.39
0.44
0.50
0.66
0.66
0.70
0.76
0.86
0.86
1.04
0.60
0.66
0.90
0.96
1.23
0.19
0.28
0.41
0.62
0.88
0.55
0.63
0.87
1.06
1.42
0.56
0.67
0.87
1.26
1.50
0.56
0.67
0.87
1.12
1.50
32
B r e n n a n
I n d u s t r i e s
0.72
0.81
0.86
1.17
1.39
1.01
1.11
1.27
1.86
1.99
0.65
0.79
1.01
1.44
1.73
4001-04
4001-06
4001-08
4001-12
4001-16
O Ring*
Part
T S SAE/MS
E
F
Fx G
Part
No.
Tube OD Male A Ax B C D
min.
A/F A/F
A/F H Hx Hy U No.
N6803-04-04-04-NWO
N6803-06-06-06- NWO
N6803-08-08-08- NWO
N6803-12-12-12- NWO
N6803-16-16-16- NWO
N6803-20-20-20- NWO
N6803-24-24-24- NWO
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
7/16-20
9/16-18
3/4-16
1-1/16-12
1-5/16-12
1-5/8-12
1-7/8-12
2.24
2.52
2.96
3.26
3.98
5.34
6.14
1.12
1.26
1.48
1.63
1.99
2.67
3.07
0.39
0.44
0.50
0.66
0.66
0.66
0.66
0.70
0.76
0.86
0.86
1.04
1.53
1.78
0.60
0.66
0.90
0.96
1.23
1.62
1.97
0.19
0.28
0.41
0.62
0.88
1.09
1.34
0.55
0.67
0.87
1.06
1.38
1.81
1.97
0.55
0.67
0.87
1.26
1.38
1.97
2.17
0.56
0.67
0.87
1.12
1.50
1.97
2.36
1.65
1.94
2.16
2.46
3.02
3.60
4.00
0.83
0.97
1.08
1.23
1.51
1.80
2.00
1.12
1.27
1.49
1.92
2.11
2.28
2.38
0.65
0.79
1.01
1.44
1.73
2.17
2.48
4001-04
4001-06
4001-08
4001-12
4001-16
4001-20
4001-24
Positionable Male
Run Tee N6804
Tube x Male SAE Straight Threads x Tube
Part
No.
E
F
Fx G O Ring*
T S SAE/MS
Tube OD Male A Ax B C D min.
A/F A/F
A/F H Hx Hy U
Part No.
2.24
2.53
2.97
3.55
4.10
4.96
5.45
1.12
1.26
1.48
1.63
1.99
2.67
3.07
0.39
0.44
0.50
0.66
0.66
0.66
0.66
0.70
0.76
0.86
0.86
1.04
1.53
1.78
0.60
0.66
0.90
0.96
1.23
1.62
1.97
0.19
0.28
0.41
0.62
0.88
1.09
1.34
0.55
0.67
0.87
1.06
1.42
1.81
1.97
0.56
0.67
0.87
1.26
1.42
1.97
2.17
0.56
0.67
0.87
1.12
1.50
1.97
2.36
1.95
2.24
2.57
3.15
3.62
4.09
4.38
0.83
0.97
1.08
1.23
1.51
1.80
2.00
1.12
1.27
1.49
1.92
2.11
2.29
2.38
0.65
0.79
1.01
1.44
1.73
2.16
2.46
4001-04
4001-06
4001-08
4001-12
4001-16
4001-20
4001-24
B r e n n a n
I n d u s t r i e s
33
BSPT Male
Connector N7000
Tube x Male BSPT Threads
Part
T Tube
No.
OD
P ISO
Male
N7000-02-02
N7000-02-04
N7000-04-02
N7000-04-04
N7000-04-06
N7000-04-08
N7000-06-02
N7000-06-04
N7000-06-06
N7000-06-08
N7000-08-04
N7000-08-06
N7000-08-08
N7000-12-12
N7000-16-16
N7000-20-16
N7000-20-20
N7000-24-24
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
1
1-1/4
1-1/2
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
3/4
1
1-1/4
1-1/4
1-1/2
E
F
G
A
B
C
D
min.
A/F
A/F
1.20
1.40
1.29
1.49
1.51
1.76
1.39
1.57
1.57
1.82
1.71
1.71
1.93
1.99
2.45
3.04
3.04
3.50
0.38
0.56
0.38
0.56
0.56
0.75
0.38
0.56
0.56
0.75
0.56
0.56
0.75
0.75
0.94
0.94
0.94
1.03
0.60
0.60
0.70
0.70
0.70
0.70
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
1.04
1.53
1.53
1.78
0.50
0.50
0.60
0.60
0.60
0.60
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.96
1.23
1.62
1.62
1.97
0.09
0.09
0.19
0.19
0.19
0.19
0.19
0.28
0.28
0.28
0.28
0.38
0.41
0.62
0.88
0.88
1.09
1.34
0.43
0.56
0.56
0.56
0.75
0.87
0.63
0.63
0.75
0.87
0.81
0.81
0.87
1.06
1.42
1.81
1.81
2.17
0.43
0.43
0.56
0.56
0.56
0.56
0.67
0.67
0.67
0.67
0.87
0.87
0.87
1.12
1.50
1.97
1.97
2.24
H
0.94
1.14
1.00
1.20
1.22
1.47
1.10
1.28
1.28
1.53
1.31
1.31
1.53
1.59
1.97
2.17
2.17
2.43
Part
No.
N7002-02-02
N7002-02-04
N7002-04-02
N7002-04-04
N7002-06-04
N7002-06-06
N7002-06-08
N7002-08-04
N7002-08-06
N7002-08-08
N7002-08-12
N7002-10-08
N7002-12-08
N7002-12-12
N7002-12-16
N7002-16-08
N7002-16-12
N7002-16-16
N7002-20-20
N7002-24-24
T P E
F G
Tube O.D. ISO Male
A
B
C
D
(min.)
A/F
Fd
A/F
1/8
1/8
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
3/4
3/4
3/4
1
1
1
1-1/4
1-1/2
1/8
1/4
1/8
1/4
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/2
1/2
3/4
1
1/2
3/4
1
1-1/4
1-1/2
1.18
1.39
1.27
1.48
1.54
1.59
1.82
1.68
1.70
1.93
2.08
1.98
1.93
2.08
2.18
2.20
2.26
2.36
3.11
3.57
0.28
0.44
0.28
0.44
0.44
0.44
0.56
0.44
0.44
0.56
0.62
0.56
0.56
0.62
0.72
0.56
0.62
0.72
0.78
0.87
0.60
0.60
0.70
0.70
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.04
1.53
1.78
0.50
0.50
0.60
0.60
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
1.23
1.23
1.23
1.62
1.97
0.09
0.09
0.19
0.19
0.23
0.28
0.28
0.23
0.31
0.41
0.41
0.47
0.47
0.62
0.62
0.47
0.62
0.78
0.98
1.25
0.56
0.75
0.56
0.75
0.75
0.87
1.06
0.83
0.87
1.06
1.42
1.26
1.06
1.42
1.61
1.42
1.42
1.61
1.97
2.36
34
B r e n n a n
I n d u s t r i e s
0.54
0.71
0.54
0.71
0.71
0.86
1.02
0.71
0.86
1.02
1.26
1.25
1.02
1.26
1.54
1.02
1.26
1.54
1.93
2.15
0.43
0.43
0.56
0.56
0.67
0.67
0.67
0.87
0.87
0.87
0.87
0.87
1.12
1.12
1.12
1.50
1.50
1.50
1.97
2.24
H
0.92
1.13
0.98
1.19
1.25
1.30
1.53
1.28
1.30
1.53
1.68
1.59
1.53
1.68
1.80
1.72
1.78
1.88
2.20
2.49
Part
No.
N7202-04-02
N7202-04-04
N7202-06-04
N7202-06-06
N7202-08-04
N7202-08-06
N7202-08-08
N7202-10-08
N7202-12-08
N7202-12-12
N7202-16-12
N7202-16-16
T Tube
OD
1/4
1/4
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
P ISO
E
Fx G
Male A B C D min. F A/F A/F Hx Hy U
1/8
1/4
1/4
3/8
1/4
3/8
1/2
1/2
1/2
3/4
3/4
1
1.06
1.14
1.20
1.31
1.42
1.42
1.50
1.50
1.57
1.57
1.93
1.93
0.32
0.36
0.36
0.36
0.36
0.37
0.51
0.51
0.51
0.51
0.51
0.55
B r e n n a n
0.70
0.70
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
0.60
0.60
0.66
0.66
0.90
0.90
0.96
0.96
0.96
0.96
1.23
1.23
0.16
0.19
0.23
0.28
0.23
0.31
0.41
0.41
0.41
0.62
0.62
0.78
0.55
0.63
0.63
0.87
0.81
0.87
0.94
0.94
1.06
1.06
1.42
1.42
0.56
0.75
0.75
0.87
0.75
0.87
1.06
1.06
1.06
1.42
1.42
1.61
I n d u s t r i e s
0.56
0.56
0.67
0.67
0.87
0.87
0.87
0.98
1.12
1.12
1.50
1.50
0.77
0.85
0.91
1.02
1.02
1.02
1.10
1.10
1.17
1.17
1.45
1.45
1.04
1.27
1.27
1.46
1.38
1.46
1.71
1.71
1.78
1.92
2.10
2.11
0.68
0.90
0.90
1.04
0.90
1.04
1.26
1.26
1.26
1.62
1.62
1.91
35
Single-Ferrule Fittings
Brennan Industries offers both double-ferrule and single-ferrule tube fittings. While the double-ferrule design
is more popular, there are situations where single-ferrule fittings are preferred.
No backward ferrules
One ferrule means one direction. If the ferrule has been installed backward, it would be obvious right away.
No missing ferrules
If the ferrule has not been installed, it would be easy to see that it is missing. With single-ferrule fittings,
there is less chance for an incorrect assembly.
EXAMPLE
Ordering Codes
NS2404-04-04-SS
Fitting Type
(Male Connector)
Tube
O.D.
in sixteenths
of an inch
1/4" O.D.
Pipe
Size
in sixteenths
of an inch
1/4" NPT
Material
SS = stainless steel, type 316
B = brass
36
B r e n n a n
I n d u s t r i e s
Instrumentation Valves
Brennan manufactures a wide
range of valves and manifolds
used in conjunction with fittings
for specialized applications in
instrumentation, oil and gas
installations, steam and gas
turbines, low temperature gas
and liquid gas systems and
fine gas.
Products Valves:
Needle, Shut-Off, Check, Flow
Control, Ball, Plug, etc.
Products Manifolds:
For Pressure and Differential
Pressure Instruments widely used
in the instrumentation field
I n d u s t r i e s
37
Brennan
Parker
Parker
TYLOK
No.
Description Swagelok CPI
A-LOK BI-LOK GYROLOK LET-LOK Hy-Lok CBC-LOK
N0304-01
N0304-02
N0304-03
N0304-04
N0304-05
N0304-06
N0304-08
N0304-10
N0304-12
N0304-14
N0304-16
N0304-20
N0304-24
N0304-32
N0318-01
N0318-02
N0318-03
N0318-04
N0318-05
N0318-06
N0318-08
N0318-10
N0318-12
N0318-14
N0318-16
N0318-20
N0318-24
N0318-32
N0319-B-01
N0319-B-02
N0319-B-03
N0319-B-04
N0319-B-05
N0319-B-06
N0319-B-08
N0319-B-10
N0319-B-12
N0319-B-14
N0319-B-16
N0319-B-20
N0319-B-24
N0319-B-32
N0319-F-01
N0319-F-02
N0319-F-03
N0319-F-04
N0319-F-05
N0319-F-06
N0319-F-08
N0319-F-10
N0319-F-12
N0319-F-14
N0319-F-16
N0319-F-20
N0319-F-24
N0319-F-32
N0319-S-01
N0319-S-02
N0319-S-03
N0319-S-04
N0319-S-05
N0319-S-06
N0319-S-08
N0319-S-10
N0319-S-12
N0319-S-14
N0319-S-16
N0319-S-20
N0319-S-24
N0319-S-32
N0319-FT-02
N0319-FT-04
N0319-FT-06
N0319-FT-08
N0319-FT-10
38
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN PLUG
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
IN NUT
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
BACK FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FRONT FERRULE
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERRULE SET
FERR TUBE & STICK
FERR TUBE & STICK
FERR TUBE & STICK
FERR TUBE & STICK
FERR TUBE & STICK
100-P
200-P
300-P
400-P
500-P
600-P
810-P
1010-P
1210-P
1410-P
1610-P
2000-P
2400-P
3200-P
102-1
202-1
302-1
402-1
502-1
602-1
812-1
1012-1
1212-1
1412-1
1612-1
2002-1
2402-1
3202-1
104-1
204-1
304-1
404-1
504-1
604-1
814-1
1014-1
1214-1
1414-1
1614-1
2004-1
2404-1
3204-1
103-1
203-1
303-1
403-1
503-1
603-1
813-1
1013-1
1213-1
1413-1
1613-1
2003-1
2413-1
3213-1
100 SET
200 SET
300-SET
400 SET
500 SET
600 SET
810 SET
1010 SET
1210 SET
1410 SET
1610 SET
2000 SET
2400 SET
3200 SET
N/A#
N/A#
N/A#
N/A#
N/A#
1 FNZ
2 FNZ
3 FNZ
4 FNZ
5 FNZ
6 FNZ
8 FNZ
10 FNZ
12 FNZ
14 FNZ
16 FNZ
20 FNZ
24 FNZ
32 FNZ
1 BZ
2 BZ
3 BZ
4 BZ
5 BZ
6 BZ
8 BZ
10 BZ
12 BZ
14 BZ
16 BZ
20 BZ
24 BZ
32 BZ
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
1 TZ
2 TZ
3 TZ
4 TZ
5 TZ
6 TZ
8 TZ
10 TZ
12 TZ
14 TZ
16 TZ
20 TZ
24 TZ
32 TZ
N/A#
N/A#
N/A#
N/A#
N/A#
1BLP1
2BLP2
3BLP3
4BLP4
5BLP5
6BLP6
8BLP8
10BLP10
12BLP12
14BLP14
16BLP16
20BLP20
24BLP24
32BLP32
1NU1
2NU2
3NU3
4NU4
5NU5
6NU6
8NU8
10NU10
12NU12
14NU14
16NU16
20NU20
24NU24
32NU32
1BF1
2BF2
3BF3
4BF4
5BF5
6BF6
8BF8
10BF10
12BF12
14BF14
16BF16
20BF20
24BF24
32BF32
1FF1
2FF2
3FF3
4FF4
5FF5
6FF6
8FF8
10FF10
12FF12
14FF14
16FF16
20FF20
24FF24
32FF32
1ALOK-SET
2ALOK-SET
3ALOK-SET
4ALOK-SET
5ALOK-SET
6ALOK-SET
8ALOK-SET
10ALOK-SET
12ALOK-SET
14ALOK-SET
16ALOK-SET
20ALOK-SET
24ALOK-SET
32ALOK-SET
N/A#
N/A#
N/A#
N/A#
N/A#
B r e n n a n
DBA 1
DBA 2
DBA 3
DBA 4
DBA 5
DBA 6
DBA 8
DBA 10
DBA 12
DBA 14
DBA 16
DBA 20
DBA 24
DBA 32
DNA 1
DNA 2
DNA 3
DNA 4
DNA 5
DNA 6
DNA 8
DNA 10
DNA 12
DNA 14
DNA 16
DNA 20
DNA 24
DNA 32
DOB 1
DOB 2
DOB 3
DOB 4
DOB 5
DOB 6
DOB 8
DOB 10
DOB 12
DOB 14
DOB 16
DOB 20
DOB 24
DOB 32
DOF 1
DOF 2
DOF 3
DOF 4
DOF 5
DOF 6
DOF 8
DOF 10
DOF 12
DOF 14
DOF 16
DOF 20
DOF 24
DOF 32
DOS 1
DOS 2
DOS 3
DOS 4
DOS 5
DOS 6
DOS 8
DOS 10
DOS 12
DOS 14
DOS 16
DOS 20
DOS 24
DOS 32
N/A#
N/A#
N/A#
N/A#
N/A#
1P
2P
3P
4P
5P
6P
8P
10P
12P
14P
16P
20P
24P
32P
1N
2N
3N
4N
5N
6N
8N
10N
12N
14N
16N
20N
24N
32N
1FR
2FR
3FR
4FR
5FR
6FR
8FR
10FR
12FR
14FR
16FR
20FR
24FR
32FR
1FF
2FF
3FF
4FF
5FF
6FF
8FF
10FF
12FF
14FF
16FF
20FF
24FF
32FF
1SF
2SF
3SF
4SF
5SF
6SF
8SF
10SF
12SF
14SF
16SF
20SF
24SF
32SF
N/A#
N/A#
N/A#
N/A#
N/A#
7121L-1/16-1/16
7121L-1/8-1/8
7121L-3/16-3/16
7121L-1/4-1/4
7121L-5/16-5/16
7121L-3/8-3/8
7121L-1/2-1/2
7121L-5/8-5/8
7121L-3/4-3/4
7121L-7/8-7/8
7121L-1-1
7121L-1-1/4-1-1/4
7121L-1-1/2-1/1/2
7121L-2-2
761L-1/16
761L-1/8
761L-3/16
761L-1/4
761L-5/16
761L-3/8
761L-1/2
761L-5/8
761L-3/4
761L-7/8
761L-1
761L-1-1/4
761L-1-1/2
761L-2
760LB-1/16-1/16
760LB-1/8-1/8
760LB-3/16-3/16
760LB-1/4-1/4
760LB-5/16-5/16
760LB-3/8-3/8
760LB-1/2-1/2
760LB-5/8-5/8
760LB-3/4-3/4
760LB-7/8-7/8
760LB-1-1
760LB-1-1/4-1-1/4
760LB-1-1/2-1/1/2
760LB-2-2
760LF-1/16-1/16
760LF-1/8-1/8
760LF-3/16-3/16
760LF-1/4-1/4
760LF-5/16-5/16
760LF-3/8-3/8
760LF-1/2-1/2
760LF-5/8-5/8
760LF-3/4-3/4
760LF-7/8-7/8
760LF-1-1
760LF-1-1/4-1-1/4
760LF-1-1/2-1/1/2
760LF-2-2
760LB + 760LF-1/16
760LB + 760LF-1/8
760LB + 760LF-3/16
760LB + 760LF-1/4
760LB + 760LF-5/16
760LB + 760LF-3/8
760LB + 760LF-1/2
760LB + 760LF-5/8
760LB + 760LF-3/4
760LB + 760LF-7/8
760LB + 760LF-1
760LB + 760LF-1-1/4
760LB + 760LF-1-1/2
760LB + 760LF-2
N/A#
N/A#
N/A#
N/A#
N/A#
I n d u s t r i e s
CPA-1
CPA-2
CPA-3
CPA-4
CPA-5
CPA-6
CPA-8
CPA-10
CPA-12
CPA-14
CPA-16
CPA-20
CPA-24
CPA-32
CN-1
CN-2
CN-3
CN-4
CN-5
CN-6
CN-8
CN-10
CN-12
CN-14
CN-16
CN-20
CN-24
CN-32
CFB-1
CFB-2
CFB-3
CFB-4
CFB-5
CFB-6
CFB-8
CFB-10
CFB-12
CFB-14
CFB-16
CFB-20
CFB-24
CFB-32
CFF-1
CFF-2
CFF-3
CFF-4
CFF-5
CFF-6
CFF-8
CFF-10
CFF-12
CFF-14
CFF-16
CFF-20
CFF-24
CFF-32
CFS-1
CFS-2
CFS-3
CFS-4
CFS-5
CFS-6
CFS-8
CFS-10
CFS-12
CFS-14
CFS-16
CFS-20
CFS-24
CFS-32
N/A#
N/A#
N/A#
N/A#
N/A#
1-DF PLUG
2-DF PLUG
3-DF PLUG
4-DF PLUG
5-DF PLUG
6-DF PLUG
8-DF PLUG
10-DF PLUG
12-DF PLUG
14-DF PLUG
16-DF PLUG
20-DF PLUG
24-DF PLUG
32-DF PLUG
DN-1
DN-2
DN-32
DN-4
DN-5
DN-8
DN-8
DN-10
DN-12
DN-14
DN-16
DN-20
DN-24
DN-32
DRC-1
DRC-2
DRC-32
DRC-4
DRC-5
DRC-6
DRC-8
DRC-10
DRC-12
DRC-14
DRC-16
DRC-20
DRC-24
DRC-32
DFC-1
DFC-2
DFC-3
DFC-4
DFC-5
DFC-6
DFC-8
DFC-10
DFC-12
DFC-14
DFC-16
DFC-20
DFC-24
DFC-32
DCSET-1-10
DCSET-2-10
DCSET-3-10
DCSET-4-10
DCSET-5-10
DCSET-6-10
DCSET-8-10
DCSET-10-10
DCSET-12-10
DCSET-14-10
DCSET-16-10
DCSET-20-10
DCSET-24-10
DCSET-32-10
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
200-6-2AN
400-6-4AN
600-6-6AN
810-6-8AN
1210-6-12AN
1610-6-16AN
100-6
200-6-1
200-6
300-6-2
300-6
400-6-2
400-6
500-6-2
500-6-4
500-6
600-6-2
600-6-4
600-6
810-6-2
810-6-4
810-6-6
810-6
1010-6-6
1010-6-8
1010-6
1210-6-4
1210-6-6
1210-6-8
1210-6
1410-6
1610-6-8
1610-6-12
1610-6
2000-6-20
2000-6
2400-6-20
2400-6
3200-6
100-1-1
100-1-2
200-1-1
200-1-2
200-1-4
200-1-6
300-1-2
400-1-1
400-1-2
400-1-4
400-1-6
400-1-8
500-1-2
500-1-4
600-1-2
600-1-4
600-1-6
600-1-8
600-1-12
810-1-2
810-1-4
810-1-6
810-1-8
810-1-12
810-1-16
1010-1-6
1010-1-8
1210-1-6
1210-1-8
1210-1-12
1210-1-16
1410-1-12
1610-1-8
1610-1-12
N/A#
N/A#
2-2 XHBZ
4-4 XHBZ
6-6 XHBZ
8-8 XHBZ
12-12 XHBZ
16-16 XHBZ
1-1 HBZ
2-1 HBZ
2-2 HBZ
3-2 HBZ
3-3 HBZ
4-2 HBZ
4-4 HBZ
5-2 HBZ
5-4 HBZ
5-5 HBZ
6-2 HBZ
6-4 HBZ
6-6 HBZ
8-2 HBZ
8-4 HBZ
8-6 HBZ
8-8 HBZ
10-6 HBZ
10-8 HBZ
10-10 HBZ
12-4 HBZ
12-6 HBZ
12-8 HBZ
12-12 HBZ
14-14 HBZ
16-8 HBZ
16-12 HBZ
16-16 HBZ
20-16 HBZ
20-20 HBZ
24-20 HBZ
24-24 HBZ
32-32 HBZ
1-1 FBZ
1-2 FBZ
2-1 FBZ
2-2 FBZ
2-4 FBZ
2-6 FBZ
3-2 FBZ
4-1 FBZ
4-2 FBZ
4-4 FBZ
4-6 FBZ
4-8 FBZ
5-2 FBZ
5-4 FBZ
6-2 FBZ
6-4 FBZ
6-6 FBZ
6-8 FBZ
6-12 FBZ
8-2 FBZ
8-4 FBZ
8-6 FBZ
8-8 FBZ
8-12 FBZ
8-16 FBZ
10-6 FBZ
10-8 FBZ
12-6 FBZ
12-8 FBZ
12-12 FBZ
12-16 FBZ
14-12 FBZ
16-8 FBZ
16-12 FBZ
N/A#
N/A#
2XASC2
4XASC4
6XASC6
8XASC8
12XASC12
16XASC16
1SC1
2SC1
2SC2
3SC2
3SC3
4RU2
4SC4
5RU2
5RU4
5SC5
6RU2
6RU4
6SC6
8RU2
8RU4
8RU6
8SC8
10RU6
10RU8
10SC10
12RU4
12RU6
12RU8
12SC12
14SC14
16RU8
16RU12
16SC16
20RU16
20SC20
24RU20
24SC24
32SC32
1MSC1N
1MSC2N
2MSC2N
2MSC2N
2MSC4N
2MSC6N
3MSC2N
4MSC1N
4MSC2N
4MSC4N
4MSC6N
4MSC8N
5MSC2N
5MSC4N
6MSC2N
6MSC4N
6MSC6N
6MSC8N
6MSC12N
8MSC2N
8MSC4N
8MSC6N
8MSC8N
8MSC12N
8MSC16N
10MSC6N
10MSC8N
12MSC6N
12MSC8N
12MSC12N
12MSC16N
14MSC12N
16MSC8N
16MSC12N
B r e n n a n
N/A#
N/A#
DUC 2-2
DUC 4-4
DUC 6-6
DUC 8-8
DUC 12-12
DUC 16-16
DUA 1
DUR 2-1
DUA 2
DUR 3-2
DUA 3
DUR 4-2
DUA 4
DUR 5-2
DUA 5-4
DUA 5
DUR 6-2
DUR 6-4
DUA 6
DUR 8-2
DUR 8-4
DUR 8-6
DUA 8
DUR 10-6
DUR 10-8
DUA 10
DUR 12-4
DUR 12-6
DUR 12-8
DUA 12
DUA 14
DUR 16-8
DUR 16-12
DUA 16
DUR 20-16
DUA 20
DUR 24-20
DUA 24
DUA 32
DCT 1-1
DCT 1-2
DCT 2-1
DCT 2-2
DCT 2-4
DCT 2-6
DCT 3-2
DCT 4-1
DCT 4-2
DCT 4-4
DCT 4-6
DCT 4-8
DCT 5-2
DCT 5-4
DCT 6-2
DCT 6-4
DCT 6-6
DCT 6-8
DCT 6-12
DCT 8-2
DCT 8-4
DCT 8-6
DCT 8-8
DCT 8-12
DCT 8-16
DCT 10-6
DCT 10-8
DCT 12-6
DCT 12-8
DCT 12-12
DCT 12-16
DCT 14-12
DCT 16-8
DCT 16-12
N/A#
N/A#
2UAN2
4UAN4
6UAN6
8UAN8
12UAN12
16UAN16
1U
2RU1
2U
3RU2
3U
4RU2
4U
5RU2
5U4
5U
6RU2
6RU4
6U
8RU2
8RU4
8RU6
8U
10RU6
10RU8
10U
12RU4
12RU6
12RU8
12U
14U
16RU8
16RU12
16U
20RU16
20U
24RU20
24U
32U
1CM1
1CM2
2CM1
2CM2
2CM4
2CM6
3CM2
4CM1
4CM2
4CM4
4CM6
4CM8
5CM2
5CM4
6CM2
6CM4
6CM6
6CM8
6CM12
8CM2
8CM4
8CM6
8CM8
8CM12
8CM16
10CM6
10CM8
12CM6
12CM8
12CM12
12CM16
14CM12
16CM8
16CM12
N/A#
N/A#
762LFL-1/8-1/8
762LFL-1/4-1/4
762LFL-3/8-38
762LFL-1/2-1/2
762LFL-3/4-3/4
762LFL-1-1
762L-1/16-1/16
762L-1/8-1/16
762L-1/8-1/8
762L-3/16-1/8
762L-3/16-3/16
763L-1/4-1/8
762L-1/4-1/4
763L-5/16-1/8
763L-5/16-1/4
762L-5/16-5/16
763L-3/8-1/8
763L-3/8-1/4
762L-3/8-3/8
763L-1/2-1/8
763L-1/2-1/4
763L-1/2-3/8
762L-1/2-1/2
763L-5/8-3/8
763L-5/8-1/2
762L-5/8-5/8
763L-3/4-1/4
763L-3/4-3/8
763L-3/4-1/2
762L-3/4-3/4
762L-7/8-7/8
763L-1-1/2
763L-1-3/4
762L-1-1
763L-1-1/4-1
762L-1-1/4-1-1/4
763L-1-1/2-1-1/4
762L-1-1/2-1-1/2
762L-2-2
768L-1/16-1/16
768L-1/16-1/8
768L-1/8-1/16
768L-1/8-1/8
768L-1/8-1/4
768L-1/8-3/8
768L-3/16-1/8
768L-1/4-1/16
768L-1/4-1/8
768L-1/4-1/4
768L-1/4-3/8
768L-1/4-1/2
768L-5/16-1/8
768L-5/16-1/4
768L-3/8-1/8
768L-3/8-1/4
768L-3/8-3/8
768L-3/8-1/2
768L-3/8-3/4
768L-1/2-1/8
768L-1/2-1/4
768L-1/2-3/8
768L-1/2-1/2
768L-1/2-3/4
768L-1/2-1
768L-5/8-3/8
768L-5/8-1/2
768L-3/4-3/8
768L-3/4-1/2
768L-3/4-3/4
768L-3/4-1
768L-7/8-3/4
768L-1-1/2
768L-1-3/4
I n d u s t r i e s
N/A#
N/A#
CFU-2
CFU-4
CFU-6
CFU-8
CFU-12
CFU-16
CUA-1
CUA-2-1
CUA-2
CUR-3-2
CUA-3
CUR-4-2
CUA-4
CUR-5-2
CUR-5-4
CUA-5
CUR-6-2
CUR-6-4
CUA-6
CUR-8-2
CUR-8-4
CUR-8-6
CUA-8
CUR-10-6
CUR-10-8
CUA-10
CUR-12-4
CUR-12-6
CUR-12-8
CUA-12
CUA-14
CUR-16-8
CUR-16-12
CUA-16
#N/A
CUA-20
#N/A
CUA-24
CUA-32
CMC-1-1N
CMC-1-2N
CMC-2-1N
CMC-2-2N
CMC-2-4N
CMC-2-6N
CMC-3-2N
CMC-4-1N
CMC-4-2N
CMC-4-4N
CMC-4-6N
CMC-4-8N
CMC-5-2N
CMC-5-4N
CMC-6-2N
CMC-6-4N
CMC-6-6N
CMC-6-8N
CMC-6-12N
CMC-8-2N
CMC-8-4N
CMC-8-6N
CMC-8-8N
CMC-8-12N
CMC-8-16N
CMC-10-6N
CMC-10-8N
CMC-12-6N
CMC-12-8N
CMC-12-12N
CMC-12-16N
CMC-14-12N
CMC-16-8N
CMC-16-12N
N/A#
N/A#
2-SUANF-2
4-SUANF-4
6-SUANF-6
8-SUANF-8
12-SUANF-12
16-SUANF-16
1-DU
2-DRU-1
DU-2
3-DRU-2
DU-3
4-DRU-2
4-DU
5-DRU-2
5-DRU-4
6-DU
6-DRU-2
6-DRU-4
6-DU
8-DRU-2
8-DRU-4
8-DRU-6
8-DU
10-DRU-6
10-DRU-8
10-DU
12-DRU-4
12-DRU-6
12-DRU-8
12-DU
14-DU
16-DRU-8
16-DRU-12
16-DU
20-DRU-16
20-DU
24-DRU-20
24-DU
32-DU
1-DMC-1
1-DMC-2
2-DMC-1
2-DMC-2
2-DMC-4
2-DMC-6
3-DMC-2
4-DMC-1
4-DMC-2
4-DMC-4
4-DMC-6
4-DMC-8
5-DMC-2
5-DMC-4
6-DMC-2
6-DMC-4
6-DMC-6
6-DMC-8
6-DMC-12
8-DMC-2
8-DMC-4
8-DMC-6
8-DMC-8
8-DMC-12
8-DMC-16
10-DMC-6
10-DMC-8
12-DMC-6
12-DMC-8
12-DMC-12
12-DMC-16
14-DMC-12
16-DMC-8
16-DMC-12
39
Brennan
Parker
Parker
TYLOK
No.
Description Swagelok CPI
A-LOK BI-LOK GYROLOK LET-LOK Hy-Lok CBC-LOK
N2404-16-16
N2404-20-16
N2404-20-20
N2404-24-24
N2404-32-32
N2404-01-01-BT
N2404-01-02-BT
N2404-02-02-BT
N2404-02-04-BT
N2404-03-02-BT
N2404-03-04-BT
N2404-04-02-BT
N2404-04-04-BT
N2404-04-06-BT
N2404-04-08-BT
N2404-05-04-BT
N2404-05-08-BT
N2404-06-04-BT
N2404-06-06-BT
N2404-06-08-BT
N2404-08-06-BT
N2404-08-08-BT
N2404-08-12-BT
N2404-10-08-BT
N2404-10-12-BT
N2404-12-08-BT
N2404-12-12-BT
N2404-12-16-BT
N2404-14-12-BT
N2404-14-16-BT
N2404-16-12-BT
N2404-16-16-BT
N2405-01-01
N2405-01-02
N2405-02-02
N2405-02-04
N2405-03-02
N2405-04-02
N2405-04-04
N2405-04-06
N2405-04-08
N2405-05-02
N2405-05-04
N2405-06-02
N2405-06-04
N2405-06-06
N2405-06-08
N2405-08-04
N2405-08-06
N2405-08-08
N2405-08-12
N2405-10-06
N2405-10-08
N2405-12-08
N2405-12-12
N2405-14-12
N2405-16-12
N2405-16-16
N2405-20-20
N2405-24-24
N2406-02-04
N2406-04-02
N2406-04-04
N2406-04-06
N2406-04-08
N2406-05-06
N2406-05-08
N2406-06-02
N2406-06-04
N2406-06-06
N2406-06-08
N2406-08-02
N2406-08-04
N2406-08-06
N2406-08-08
40
IN-MNPT
IN-MNPT
IN-MNPT
IN-MNPT
IN-MNPT
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-MNPT Bore Through
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
IN-FNPT
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
1610-1-16
2000-1-16
2000-1-20
2400-1-24
3200-1-32
100-1-1BT
100-1-2BT
200-1-2BT
200-1-4BT
300-1-2BT
300-1-4BT
400-1-2BT
400-1-4BT
400-1-6BT
400-1-8BT
500-1-4BT
500-1-8BT
600-1-4BT
600-1-6BT
600-1-8BT
810-1-6BT
810-1-8BT
810-1-12BT
1010-1-8BT
1010-1-12BT
1210-1-8BT
1210-1-12BT
1210-1-16BT
1410-1-12BT
1410-1-16BT
1610-1-12BT
1610-1-16BT
100-7-1
100-7-2
200-7-2
200-7-4
300-7-2
400-7-2
400-7-4
400-7-6
400-7-8
500-7-2
500-7-4
600-7-2
600-7-4
600-7-6
600-7-8
810-7-4
810-7-6
810-7-8
810-7-12
1010-7-6
1010-7-8
1210-7-8
1210-7-12
1410-7-12
1610-7-12
1610-7-16
2000-7-20
2400-7-24
200-R-4
400-R-2
400-R-4
400-R-6
400-R-8
500-R-6
500-R-8
200-R-6
600-R-4
600-R-6
600-R-8
810-R-2
810-R-4
810-R-6
810-R-8
16-16 FBZ
20-16 FBZ
20-20 FBZ
24-24 FBZ
32-32 FBZ
1-1 FH4BZ
1-2 FH4BZ
2-2 FH4BZ
2-4 FH4BZ
3-2 FH4BZ
3-4 FH4BZ
4-2 FH4BZ
4-4 FH4BZ
4-6 FH4BZ
4-8 FH4BZ
5-4 FH4BZ
5-8 FH4BZ
6-4 FH4BZ
6-6 FH4BZ
6-8 FH4BZ
8-6 FH4BZ
8-8 FH4BZ
8-12 FH4BZ
10-8 FH4BZ
10-12 FH4BZ
12-8 FH4BZ
12-12 FH4BZ
12-16 FH4BZ
14-12 FH4BZ
14-16 FH4BZ
16-12 FH4BZ
16-16 FH4BZ
1-1 GBZ
1-2 GBZ
2-2 GBZ
2-4 GBZ
3-2 GBZ
4-2 GBZ
4-4 GBZ
4-6 GBZ
4-8 GBZ
5-2 GBZ
5-4 GBZ
6-2 GBZ
6-4 GBZ
6-6 GBZ
6-8 GBZ
8-4 GBZ
8-6 GBZ
8-8 GBZ
8-12 GBZ
10-6 GBZ
10-8 GBZ
12-8 GBZ
12-12 GBZ
14-12 GBZ
16-12 GBZ
16-16 GBZ
20-20 GBZ
24-24 GBZ
4-2 TRBZ
2-4 TRBZ
4-4 TRBZ
6-4 TRBZ
8-4 TRBZ
6-5 TRBZ
8-5 TRBZ
6-2 TRBZ
4-6 TRBZ
6-6 TRBZ
8-6 TRBZ
2-8 TRBZ
4-8 TRBZ
6-8 TRBZ
8-8 TRBZ
16MSC16N
20MSC16N
20MSC20N
24MSC24N
32MSC32N
1MTC1N
1MTC2N
2MTC2N
2MTC4N
3MTC2N
3MTC4N
4MTC2N
4MTC4N
4MTC6N
4MTC8N
5MTC4N
5MTC8N
6MTC4N
6MTC6N
6MTC8N
8MTC6N
8MTC8N
8MTC12N
10MTC8N
10MTC12N
12MTC8N
12MTC12N
12MTC16N
14MTC12N
14MTC16N
16MTC12N
16MTC16N
1FSC1N
1FSC2N
2FSC2N
2FSC4N
3FSC2N
4FSC2N
4FSC4N
4FSC6N
4FSC8N
5FSC2N
5FSC4N
6FSC2N
6FSC4N
6FSC6N
6FSC8N
8FSC4N
8FSC6N
8FSC8N
8FSC12N
10FSC6N
10FSC8N
12FSC8N
12FSC12N
14FSC12N
16FSC12N
16FSC16N
20FSC20N
24FSC24N
4TUR2
2TUR4
4TUR4
6TUR4
8TUR4
6TUR5
8TUR5
6TUR2
4TUR6
6TUR6
8TUR6
8TUR2
4TUR8
6TUR8
8TUR8
B r e n n a n
DCT 16-16
DCT 20-16
DCT 20-20
DCT 24-24
DCT 32-32
DCZ 1-1
DCZ 1-2
DCZ 2-2
DCZ 2-4
DCZ 3-2
DCZ 3-4
DCZ 4-2
DCZ 4-4
DCZ 4-6
DCZ 4-8
DCZ 5-4
DCZ 5-8
DCZ 6-4
DCZ 6-6
DCZ 6-8
DCZ 8-6
DCZ 8-8
DCZ 8-12
DCZ 10-8
DCZ 10-12
DCZ 12-8
DCZ 12-12
DCZ 12-16
DCZ 14-12
DCZ 14-16
DCZ 16-12
DCZ 16-16
DSA 1-1
DSA 1-2
DSA 2-2
DSA 2-4
DSA 3-2
DSA 4-2
DSA 4-4
DSA 4-6
DSA 4-8
DSA 5-2
DSA 5-4
DSA 6-2
DSA 6-4
DSA 6-6
DSA 6-8
DSA 8-4
DSA 8-6
DSA 8-8
DSA 8-12
DSA 10-6
DSA 10-8
DSA 12-8
DSA 12-12
DSA 14-12
DSA 16-12
DSA 16-16
DSA 20-20
DSA 24-24
DRE 2-4
DRE 4-2
DRE 4-4
DRE 4-6
DRE 4-8
DRE 5-6
DRE 5-8
DRE 6-2
DRE 6-4
DRE 6-6
DRE 6-8
DRE 8-2
DRE 8-4
DRE 8-6
DRE 8-8
16CM16
20CM16
20CM20
24CM24
32CM32
1CMT1
1CMT2
2CMT2
2CMT4
3CMT3
3CMT4
4CMT2
4CMT4
4CMT6
4CMT8
5CMT4
5CMT8
6CMT4
6CMT6
6CMT8
8CMT6
8CMT8
8CMT12
10CMT8
10CMT12
12CMT8
12CMT12
12CMT16
14CMT12
14CMT16
16CMT12
16CMT16
1CF1
1CF2
2CF2
2CF4
3CF2
4CF2
4CF4
4CF6
4CF8
5CF2
5CF4
6CF2
6CF4
6CF6
6CF8
8CF4
8CF6
8CF8
8CF12
10CF6
10CF8
12CF8
12CF12
14CF12
16CF12
16CF16
20CF20
24CF24
2R4
4R2
4R4
4R6
4R8
5R6
5R8
6R2
6R4
6R6
6R8
8R2
8R4
8R6
8R8
768L-1-1
768L-1-1/4-1
768L-1-1/4-1-1/4
768L-1-1/2-1-1/2
768L-2-2
768L 1/16X1/16 TC
768L 1/16X1/8 TC
768L 1/8X1/8 TC
768L 1/8X1/4 TC
768L 3/16X1/8 TC
768L 3/16X1/4TC
768L 1/4X1/8 TC
768L 1/4X1/4 TC
768L 1/4X3/8 TC
768L 1/4X1/2 TC
768L 5/16X1/4 TC
768L 5/16X1/2 TC
768L 3/8X1/4 TC
768L 3/8X3/8 TC
768L 3/8X1/2 TC
768L 1/2X3/8 TC
768L 1/2X1/2 TC
768L 1/2X3/4 TC
768L 5/8X1/2 TC
768L 5/8X3/4 TC
768L 3/4X1/2 TC
768L 3/4X3/4 TC
768L 3/4X1 TC
768L 7/8X3/4 TC
768L 7/8X1 TC
768L 1X3/4 TC
768L 1X1 TC
766L-1/16-1/16
766L-1/16-1/8
766L-1/8-1/8
766L-1/8-1/4
766L-3/16-1/8
766L-1/4-1/8
766L-1/4-1/4
766L-1/4-3/8
766L-1/4-1/2
766L-5/16-1/8
766L-5/16-1/4
766L-3/8-1/8
766L-3/8-1/4
766L-3/8-3/8
766L-3/8-1/2
766L-1/2-1/4
766L-1/2-3/8
766L-1/2-1/2
766L-1/2-3/4
766L-5/8-3/8
766L-5/8-1/2
766L-3/4-1/2
766L-3/4-3/4
766L-7/8-3/4
766L-1-3/4
766L-1-1
766L-1-1/4-1-1/4
766L-1-1/2-1/1/2
767LT-1/8-1/4
767LT-1/4-1/8
767LT-1/4-1/4
767LT-1/4-3/8
767LT-1/4-1/2
767LT-5/16-3/8
767LT-5/16-1/2
767LT-3/8-1/8
767LT-3/8-1/4
767LT-3/8-3/8
767LT-3/8-1/2
767LT-1/2-1/8
767LT-1/2-1/4
767LT-1/2-3/8
767LT-1/2-1/2
I n d u s t r i e s
CMC-16-16N
CMC-20-16N
CMC-20-20N
CMC-24-24N
CMC-32-32N
CMCT-1-1N
CMCT-1-2N
CMCT-2-2N
CMCT-2-4N
CMCT-3-2N
CMCT-3-4N
CMCT-4-2N
CMCT-4-4N
CMCT-4-6N
CMCT-4-8N
CMCT-5-4N
CMCT-5-8N
CMCT-6-4N
CMCT-6-6N
CMCT-6-8N
CMCT-8-6N
CMCT-8-8N
CMCT-8-12N
CMCT-10-8N
CMCT-10-12N
CMCT-12-8N
CMCT-12-12N
CMCT-12-16N
CMCT-14-12N
CMCT-14-16N
CMCT-16-12N
CMCT-16-16N
CFC-1-1N
CFC-1-2N
CFC-2-2N
CFC-2-4N
CFC-3-2N
CFC-4-2N
CFC-4-4N
CFC-4-6N
CFC-4-8N
CFC-5-2N
CFC-5-4N
CFC-6-2N
CFC-6-4N
CFC-6-6N
CFC-6-8N
CFC-8-4N
CFC-8-6N
CFC-8-8N
CFC-8-12N
CFC-10-6N
CFC-10-8N
CFC-12-8N
CFC-12-12N
CFC-14-12N
CFC-16-12N
CFC-16-16N
CFC-20-20N
CFC-24-24N
CR-2-4
CR-4-2
CR-4-4
CR-4-6
CR-4-8
CR-5-6
CR-5-8
CR-6-2
CR-6-4
CR-6-6
CR-6-8
CR-8-2
CR-8-4
CR-8-6
CR-8-8
16-DMC-16
20-DMC-16
20-DMC-20
24-DMC-24
32-DMC-32
1-DMC-1-BT
1-DMC-2-BT
2-DMC-2-BT
2-DMC-4-BT
3-DMC-2-BT
3-DMC-4-BT
4-DMC-2-BT
4-DMC-4-BT
4-DMC-6-BT
4-DMC-8-BT
5-DMC-4-BT
5-DMC-8-BT
6-DME-4-BT
6-DMC-6-BT
6-DMC-8-BT
8-DMC-6-BT
8-DMC-8-BT
8-DMC-12-BT
10-DMC-8-BT
10-DMC-12-BT
12-DMC-8
12-DMC-12
12-DMC-16
14-DMC-12
14-DMC-16
16-DMC-12
16-DMC-16
1-DFC-1
1-DFC-2
2-DFC-2
2-DFC-4
3-DFC-2
4-DFC-2
4-DFC-4
4-DFC-6
4-DFC-8
5-DFC-2
5-DFC-4
6-DFC-2
6-DFC-4
6-DFC-6
6-DFC-8
8-DFC-4
8-DFC-6
8-DFC-8
8-DFC-12
10-DFC-6
10-DFC-8
12-DFC-8
12-DFC-12
14-DFC-12
16-DFC-12
16-DFC-16
20-DFC-20
24-DFC-24
2-DRATT-4
4-DRATT-2
4-DRATT-4
4-DRATT-6
4-DRATT-8
5-DRATT-6
5-DRATT-8
6-DRATT-2
6-DRATT-4
6-DRATT-6
6-DRATT-8
8-DRATT-2
8-DRATT-4
8-DRATT-6
8-DRATT-8
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
TUBE RED
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN CAP
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-BW
IN-SW
IN-SW
IN-SW
IN-SW
IN-SW
IN-SW
IN-SW
IN-SW
STDPIPE-MJIC
STDPIPE-MJIC
STDPIPE-MJIC
STDPIPE-MJIC
STDPIPE-MJIC
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MNPT
STDPIPE-MORB
810-R-12
810-R-16
1010-R-12
1010-R-14
1210-R-16
1610-R-20
1610-R-24
2400-R-16
100-C
200-C
300-C
400-C
500-C
600-C
810-C
1010-C
1210-C
1410-C
1610-C
2000-C
2400-C
3200-C
200-1-2W
400-1-2W
400-1-4W
500-1-2W
500-1-4W
600-1-4W
600-1-6W
600-1-8W
810-1-6W
810-1-8W
810-1-12W
1010-1-8W
1210-1-12W
1610-1-16W
2000-1-20W
2400-1-24W
200-6-2W
400-6-4W
600-6-6W
810-6-8W
1210-6-12W
1610-6-16W
2000-6-20W
2400-6-20W
4-TA-1-4AN
6-TA-1-6AN
8-TA-1-8AN
12-TA-1-12AN
16-TA-1-16AN
2-TA-1-2
2-TA-1-4
3-TA-1-2
3-TA-1-4
4-TA-1-2
4-TA-1-4
4-TA-1-6
4-TA-1-8
5-TA-1-4
6-TA-1-2
6-TA-1-4
6-TA-1-6
6-TA-1-8
8-TA-1-4
8-TA-1-6
8-TA-1-8
10-TA-1-8
12-TA-1-8
12-TA-1-12
16-TA-1-12
16-TA-1-16
20-TA-1-20
24-TA-1-24
2-TA-1-2ST
12-8 TRBZ
16-8 TRBZ
12-10 TRBZ
14-10 TRBZ
16-12 TRBZ
20-16 TRBZ
24-16 TRBZ
16-24 TRBZ
1 PNZ
2 PNZ
3 PNZ
4 PNZ
5 PNZ
6 PNZ
8 PNZ
10 PNZ
12 PNZ
14 PNZ
16 PNZ
20 PNZ
24 PNZ
32 PNZ
2-1/8 ZHBW2
4-1/8 ZHBW2
4-1/4 ZHBW2
5-1/8 ZHBW2
5-1/4 ZHBW2
6-1/4 ZHBW2
6-3/8 ZHBW2
6-1/2 ZHBW2
8-3/8 ZHBW2
8-1/2 ZHBW2
8-3/4 ZHBW2
10-1/2 ZHBW2
12-3/4 ZHBW2
16-1 ZHBW2
20-1-1/4 ZHBW2
24-1-1/2 ZHBW2
2-2 ZHBW
4-4 ZHBW
6-6 ZHBW
8-8 ZHBW
12-12 ZHBW
16-16 ZHBW
20-20 ZHBW
24-24 ZHBW
N/A#
N/A#
N/A#
N/A#
N/A#
2-2 T2HF
2-4 T2HF
3-2 T2HF
3-4 T2HF
4-2 T2HF
4-4 T2HF
4-6 T2HF
4-8 T2HF
5-4 T2HF
6-2 T2HF
6-4 T2HF
6-6 T2HF
6-8 T2HF
8-4 T2HF
8-6 T2HF
8-8 T2HF
10-8 T2HF
12-8 T2HF
12-12 T2HF
16-12 T2HF
16-16 T2HF
20-20 T2HF
24-24 T2HF
2-2 T2HOA
12TUR8
16TUR8
12TUR10
14TUR10
16TUR12
20TUR16
24TUR16
16TUR24
1BLEN1
2BLEN2
3BLEN3
4BLEN4
5BLEN5
6BLEN6
8BLEN8
10BLEN10
12BLEN12
14BLEN14
16BLEN16
20BLEN20
24BLEN24
32BLEN32
2-1/8 ZHLW2
4-1/8 ZHLW2
4-1/4 ZHLW2
5-1/8 ZHLW2
5-1/4 ZHLW2
6-1/4 ZHLW2
6-3/8 ZHLW2
6-1/2 ZHLW2
8-3/8 ZHLW2
8-1/2 ZHLW2
8-3/4 ZHLW2
10-1/2 ZHLW2
12-3/4 ZHLW2
16-1 ZHLW2
20-1-1/4 ZHLW2
24-1-1/2 ZHLW2
2-2 Z-SSHLW
4-4 Z-SSHLW
6-6 Z-SSHLW
8-8 Z-SSHLW
12-12 Z-SSHLW
16-16 Z-SSHLW
20-20 Z-SSHLW
24-24 Z-SSHLW
N/A#
N/A#
N/A#
N/A#
N/A#
2MA2N
2MA4N
3MA2N
3MA4N
4MA2N
4MA4N
4MA6N
4MA8N
5MA4N
6MA2N
6MA4N
6MA6N
6MA8N
8MA4N
8MA6N
8MA8N
10MA8N
12MA8N
12MA12N
16MA12N
16MA16N
20MA20N
24MA24N
2M2TU2
B r e n n a n
DRE 8-12
DRE 8-16
DRE 10-12
DRE 10-14
DRE 12-16
DRE 16-20
DRE 16-24
DRE 24-16
DCA 1
DCA 2
DCA 3
DCA 4
DCA 5
DCA 6
DCA 8
DCA 10
DCA 12
DCA 14
DCA 16
DCA 20
DCA 24
DCA 32
DCB 2-2
DCB 4-2
DCB 4-4
DCB 5-2
DCB 5-4
DCB 6-4
DCB 6-6
DCB 6-8
DCB 8-6
DCB 8-8
DCB 8-12
DCB 10-8
DCB 12-12
DCB 16-16
DCB 20-20
DCB 24-24
DCW 2
DCW 4
DCW 6
DCW 8
DCW 12
DCW 16
DCW 20
DCW 24
N/A#
N/A#
N/A#
N/A#
N/A#
DHA 2-2
DHA 2-4
DHA 3-2
DHA 3-4
DHA 4-2
DHA 4-4
DHA 4-6
DHA 4-8
DHA 5-4
DHA 6-2
DHA 6-4
DHA 6-6
DHA 6-8
DHA 8-4
DHA 8-6
DHA 8-8
DHA 10-8
DHA 12-8
DHA 12-12
DHA 16-12
DHA 16-16
DHA 20-20
DHA 24-24
N/A#
8R12
8R16
10R12
10R14
12R16
16R20
16R24
24R16
1CP
2CP
3CP
4CP
5CP
6CP
8CP
10CP
12CP
14CP
16CP
20CP
24CP
32CP
2CBW2
4CBW2
4CBW4
5CBW2
5CBW4
6CBW4
6CBW6
6CBW8
8CBW6
8CBW8
8CBW12
10CBW8
12CBW12
16CBW16
20CBW20
24CBW24
2CW2
4CW4
6CW6
8CW8
12CW12
16CW16
20CW20
24CW24
N/A#
N/A#
N/A#
N/A#
N/A#
2AM2
2AM4
3AM2
3AM4
4AM2
4AM4
4AM6
4AM8
5AM4
6AM2
6AM4
6AM6
6AM8
8AM4
8AM6
8AM8
10AM8
12AM8
12AM12
16AM12
16AM16
20AM20
24AM24
2AOS
767LT-1/2-3/4
767LT-1/2-1
767LT-5/8-3/4
767LT-5/8-7/8
767LT-3/4-1
767LT-1-1-1/4
767LT-1-1/1/2
767LT-11/2-1
7108L-1/16-1/16
7108L-1/8-1/8
7108L-3/16-3/16
7108L-1/4-1/4
7108L-5/16-5/16
7108L-3/8-3/8
7108L-1/2-1/2
7108L-5/8-5/8
7108L-3/4-3/4
7108L-7/8-7/8
7108L-1-1
7108L-1-1/4-1-1/4
7108L-1-1/2-1/1/2
7108L-2-2
768LN-1/8-1/8
768LN-1/4-1/8
768LN-1/4-1/4
768LN-5/16-1/8
768LN-5/16-1/4
768LN-3/8-1/4
768LN-3/8-3/8
768LN-3/8-1/2
768LN-1/2-3/8
768LN-1/2-1/2
768LN-1/2-3/4
768LN-5/8-1/2
768LN-3/4-3/4
768LN-1-1
768LN-1-1/4-1-1/4
768LN-1-1/2-1/1/2
768LW-1/8-1/8
768LW-1/4-1/4
768LW-3/8-3/8
768LW-1/2-1/2
768LW-3/4-3/4
768LW-1-1
768LW-1-1/4-1-1/4
768LW-1-1/2-1/1/2
N/A#
N/A#
N/A#
N/A#
N/A#
739LM-1/8-1/8
739LM-1/8-1/4
739LM-3/16-1/8
739LM-3/16-1/4
739LM-1/4-1/8
739LM-1/4-1/4
739LM-1/4-3/8
739LM-1/4-1/2
739LM-5/16-1/4
739LM-3/8-1/8
739LM-3/8-1/4
739LM-3/8-3/8
739LM-3/8-1/2
739LM-1/2-1/4
739LM-1/2-3/8
739LM-1/2-1/2
739LM-5/8-1/2
739LM-3/4-1/2
739LM-3/4-3/4
739LM-1-3/4
739LM-1-1
739LM-1-1/4-1-1/4
739LM-1-1/2-1/1/2
N/A#
I n d u s t r i e s
CR-8-12
CR-8-16
CR-10-12
CR-10-14
CR-12-16
CR-16-20
CR-16-24
CR-24-16
CCA-1
CCA-2
CCA-3
CCA-4
CCA-5
CCA-6
CCA-8
CCA-10
CCA-12
CCA-14
CCA-16
CCA-20
CCA-24
CCA-32
CWC-2-2P
CWC-4-2P
CWC-4-4P
CWC-5-2P
CWC-5-4P
CWC-6-4P
CWC-6-6P
CWC-6-8P
CWC-8-6P
CWC-8-8P
CWC-8-12P
CWC-10-8P
CWC-12-12P
CWC-16-16P
CWC-20-20P
CWC-24-24P
CSWC-2-2
CSWC-4-4
CSWC-6-6
CSWC-8-8
CSWC-12-12
CSWC-16-16
CSWC-20-20
CSWC-24-24
N/A#
N/A#
N/A#
N/A#
N/A#
CAM-2-2N
CAM-2-4N
CAM-3-2N
CAM-3-4N
CAM-4-2N
CAM-4-4N
CAM-4-6N
CAM-4-8N
CAM-5-4N
CAM-6-2N
CAM-6-4N
CAM-6-6N
CAM-6-8N
CAM-8-4N
CAM-8-6N
CAM-8-8N
CAM-10-8N
CAM-12-8N
CAM-12-12N
CAM-16-12N
CAM-16-16N
CAM-20-20N
CAM-24-24N
CAOS-2-2U
8-DRATT-12
8-DRATT-16
10-DRATT-12
10-DRATT-14
12-DRATT-16
16-DRATT-20
16-DRATT-24
24-DRATT-16
1-DCAP
2-DCAP
3-DCAP
4-DCAP
5-DCAP
6-DCAP
8-DCAP
10-DCAP
12-DCAP
14-DCAP
16-DCAP
20-DCAP
24-DCAP
32-DCAP
2-DTBW-2
4-DTBW-2
4-DTBW-4
5-DTBW-2
5-DTBW-4
6-DTBW-4
6-DTBW-6
6-DTBW-8
8-DTBW-6
8-DTBW-8
8-DTBW-12
10-DTBW-8
12-DTBW-12
16-DTBW-16
20-DTBW-20
24-DTBW-24
2-DTSW-2
4-DTSW-4
6-DTSW-6
8-DTSW-8
12-DTSW-12
16-DTSW-16
20-DTSW-20
24-DTSW-24
4-DATANF-4
6-DATANF-6
8-DATANF-8
12-DATANF-12
16-DATANF-16
2-DATPM-2
2-DATPM-4
3-DATPM-2
3-DATPM-4
4-DATPM-2
4-DATPM-4
4-DATPM-6
4-DATPM-8
5-DATPM-5
6-DATPM-2
6-DATPM-4
6-DATPM-6
6-DATPM-8
8-DATPM-4
8-DATPM-6
8-DATPM-8
10-DATPM-8
12-DATPM-8
12-DATPM-12
16-DATPM-12
16-DATPM-16
20-DATPM-20
24-DATPM-24
N/A#
41
Brennan
Parker
Parker
TYLOK
No.
Description Swagelok CPI
A-LOK BI-LOK GYROLOK LET-LOK Hy-Lok CBC-LOK
N2429-04-04
N2429-06-04
N2429-06-06
N2429-08-08
N2429-08-10
N2429-12-12
N2429-16-16
N2429-20-20
N2429-24-24
N2430-02-02
N2430-02-04
N2430-04-02
N2430-04-04
N2430-04-06
N2430-04-08
N2430-05-04
N2430-06-04
N2430-06-06
N2430-06-08
N2430-08-04
N2430-08-06
N2430-08-08
N2430-10-08
N2430-12-08
N2430-12-12
N2430-12-16
N2430-16-12
N2430-16-16
N2430-20-20
N2430-24-24
N2431-04-04
N2431-06-06
N2431-08-08
N2440-02-02
N2440-04-02
N2440-04-04
N2440-06-02
N2440-06-04
N2440-06-06
N2440-08-04
N2440-08-06
N2440-08-08
N2440-12-08
N2440-12-12
N2440-16-08
N2440-16-12
N2440-16-16
N2500-01-01
N2500-02-02
N2500-03-03
N2500-04-04
N2500-05-05
N2500-06-06
N2500-08-08
N2500-10-10
N2500-12-12
N2500-14-14
N2500-16-16
N2500-20-20
N2500-24-24
N2500-32-32
N2501-01-01
N2501-01-02
N2501-02-02
N2501-02-04
N2501-03-02
N2501-03-04
N2501-04-02
N2501-04-04
N2501-04-06
N2501-04-08
N2501-05-02
N2501-05-04
N2501-06-02
N2501-06-04
42
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-MORB
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FNPT
STDPIPE-FGA
STDPIPE-FGA
STDPIPE-FGA
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
STDPIPE-FERR
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-IN 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
4-TA-1-4ST
6-TA-1-4ST
6-TA-1-6
8-TA-1-8ST
8-TA-1-10ST
12-TA-1-12ST
16-TA-1-16ST
20-TA-1-20ST
24-TA-1-24ST
2-TA-7-2
2-TA-7-4
4-TA-7-2
4-TA7-4
4-TA7-6
4-TA7-8
5-TA7-4
6-TA7-4
6-TA7-6
6-TA7-8
8-TA7-4
8-TA7-6
8-TA7-8
10-TA7-8
12-TA7-8
12-TA7-12
12-TA7-16
16-TA7-16
16-TA7-12
20-TA7-20
24-TA-7-24
4-TA-7-4RT
6-TA-7-6RT
8-TA-7-8RT
201-PC
401-PC-2
401-PC
601-PC-2
601-PC-4
601-PC
811-PC-4
811-PC-6
811-PC
1211-PC-8
1211-PC
1611-PC-8
1611-PC-12
1611-PC
100-9
200-9
300-9
400-9
500-9
600-9
810-9
1010-9
1210-9
1410-9
1610-9
2000-9
2400-9
3200-9
100-2-1
100-2-2
200-2-2
200-2-4
300-2-2
300-2-4
400-2-2
400-2-4
400-2-6
400-2-8
500-2-2
500-2-4
600-2-2
600-2-4
4-4 T2HOA
6-4 T2HOA
6-6 T2HOA
8-8 T2HOA
8-10 T2HOA
12-12 T2HOA
16-16 T2HOA
20-20 T2HOA
24-24 T2HOA
2-2 T2HG
2-4 T2HG
4-2 T2HG
4-4 T2HG
4-6 T2HG
4-8 T2HG
5-4 T2HG
6-4 T2HG
6-6 T2HG
6-8 T2HG
8-4 T2HG
8-6 T2HG
8-8 T2HG
10-8 T2HG
12-8 T2HG
12-12 T2HG
12-16 T2HG
16-16 T2HG
16-12 T2HG
20-20 T2HG
24-24 T2HG
N/A#
N/A#
N/A#
2-2 ZPC
2-4 ZPC
4-4 ZPC
2-6 ZPC
4-6 ZPC
6-6 ZPC
4-8 ZPC
6-8 ZPC
8-8 ZPC
8-12 ZPC
12-12 ZPC
8-16 ZPC
12-16 ZPC
16-16 ZPC
1-1 EBZ
2-2 EBZ
3-3 EBZ
4-4 EBZ
5-5 EBZ
6-6 EBZ
8-8 EBZ
10-10 EBZ
12-12 EBZ
14-14 EBZ
16-16 EBZ
20-20 EBZ
24-24 EBZ
32-32 EBZ
1-1 CBZ
1-2 CBZ
2-2 CBZ
2-4 CBZ
3-2 CBZ
3-4 CBZ
4-2 CBZ
4-4 CBZ
4-6 CBZ
4-8 CBZ
5-2 CBZ
5-4 CBZ
6-2 CBZ
6-4 CBZ
4M2TU4
6M2TU4
6M2TU6
8M2TU8
8M2TU10
12M2TU12
16M2T16
20M2TU20
24M2TU24
2FA2N
2FA4N
4FA2N
4FA4N
4FA6N
4FA8N
5FA4N
6FA4N
6FA6N
6FA8N
8FA4N
8FA6N
8FA8N
10FA8N
12FA8N
12FA12N
12FA16N
16FA16N
16FA12N
20FA20N
24FA24N
N/A#
N/A#
N/A#
2PC2
2PC4
4PC4
2PC6
4PC6
6PC6
4PC8
6PC8
8PC8
8PC12
2PC12
8PC16
12PC16
16PC16
1EE1
2EE2
3EE3
4EE4
5EE5
6EE6
8EE8
10EE10
12EE12
14EE14
16EE16
20EE20
24EE24
32EE32
1MSEL1N
1MSEL2N
2MSEL2N
2MSEL4N
3MSEL2N
3MSEL4N
4MSEL2N
4MSEL4N
4MSEL6N
4MSEL8N
5MSEL2N
5MSEL4N
6MSEL2N
6MSEL4N
B r e n n a n
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
DHC 2-2
DHC 2-4
DHC 4-2
DHC 4-4
DHC 4-6
DHC 4-8
DHC 5-4
DHC 6-4
DHC 6-6
DHC 6-8
DHC 8-4
DHC 8-6
DHC 8-8
DHC 10-8
DHC 12-8
DHC 12-12
DHC 12-16
DHC 16-16
DHC 16-12
DHC 20-20
DHC 24-24
N/A#
N/A#
N/A#
DPC 2-2
DPC 4-2
DPC 4-4
DPC 6-2
DPC 6-4
DPC 6-6
DPC 8-4
DPC 8-6
DPC 8-8
DPC 12-8
DPC 12-12
DPC 16-8
DPC 16-12
DPC 16-16
DLA 1
DLA 2
DLA 3
DLA 4
DLA 5
DLA 6
DLA 8
DLA 10
DLA 12
DLA 14
DLA 16
DLA 20
DLA 24
DLA 32
DLN 1-1
DLN 1-2
DLN 2-2
DLN 2-4
DLN 3-2
DLN 3-4
DLN 4-2
DLN 4-4
DLN 4-6
DLN 4-8
DLN 5-2
DLN 5-4
DLN 6-2
DLN 6-4
4AOS
6AOS4
6AOS
8AOS
8AOS10
12AOS
16AOS
20AOS
24AOS
2AF2
2AF4
4AF2
4AF4
4AF6
4AF8
5AF4
6AF4
6AF6
6AF8
8AF4
8AF6
8AF8
10AF8
12AF8
12AF12
12AF16
16AF16
16AF12
20AF20
24AF24
N/A#
N/A#
N/A#
2PC
4PC2
4PC4
6PC2
64PC2
6PC4
8PC4
8PC6
8PC8
12PC8
12PC12
16PC8
16PC12
16PC16
1LU
2LU
3LU
4LU
5LU
6LU
8LU
10LU
12LU
14LU
16LU
20LU
24LU
32LU
1LM1
1LM2
2LM2
2LM4
3LM2
3LM4
4LM2
4LM4
4LM6
4LM8
5LM2
5LM4
6LM2
6LM4
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
739LF-1/8-1/8
739LF-1/8-1/4
739LF-1/4-1/8
739LF-1/4-1/4
739LF-1/4-3/8
739LF-1/4-1/2
739LF-5/16-1/4
739LF-3/8-1/4
739LF-3/8-3/8
739LF-3/8-1/2
739LF-1/2-1/4
739LF-1/2-3/8
739LF-1/2-1/2
739LF-5/8-1/2
739LF-3/4-1/2
739LF-3/4-3/4
739LF-3/4-1
739LF-1-1
739LF-1-3/4
739LF-1-1/4-1-1/4
739LF-1-1/2-1/1/2
N/A#
N/A#
N/A#
767LP-1/8-1/8
767LM-1/4-1/8
767LM-1/4-1/4
767LM-3/8-1/8
767LM-3/8-1/4
767LM-3/8-3/8
767LM-1/2-1/4
767LM-1/2-3/8
767LM-1/2-1/2
767LM-3/4-1/2
767LM-3/4-3/4
767LM-1-1/2
767LM-1-3/4
767LM-1-1
765L-1/16-1/16
765L-1/8-1/8
765L-3/16-3/16
765L-1/4-1/4
765L-5/16-5/16
765L-3/8-3/8
765L-1/2-1/2
765L-5/8-5/8
765L-3/4-3/4
765L-7/8-7/8
765L-1-1
765L-1-1/4-1-1/4
765L-1-1/2-1/1/2
765L-2-2
769L-1/16-1/16
769L-1/16-1/8
769L-1/8-1/8
769L-1/8-1/4
769L-3/16-1/8
769L-3/16-1/4
769L-1/4-1/8
769L-1/4-1/4
769L-1/4-3/8
769L-1/4-1/2
769L-5/16-1/8
769L-5/16-1/4
769L-3/8-1/8
769L-3/8-1/4
I n d u s t r i e s
CAOS-4-4U
CAOS-6-4U-316
CAOS-6-6U
CAOS-8-8U
CAOS-8-10U
CAOS-12-12U
CAOS-16-16U
CAOS-20-20U
CAOS-24-24U
CAF-2-2N
CAF-2-4N
CAF-4-2N
CAF-4-4N
CAF-4-6N
CAF-4-8N
CAF-5-4N
CAF-6-4N
CAF-6-6N
CAF-6-8N
CAF-8-4N
CAF-8-6N
CAF-8-8N
CAF-10-8N
CAF-12-8N
CAF-12-12N
CAF-12-16N
CAF-16-16N
CAF-16-12N
CAF-20-20N
CAF-24-24N
CAF-4-4G
CAF-6-6G
CAF-8-8G
CPC-2
CPR-4-2
CPR-4
CPR-6-2
CPR-6-4
CPR-6
CPR-8-4
CPR-8-6
CPR-8
CPR-12-8
CPR-12
CPR-16-8
CPR-16-12
CPR-16
CLA-1
CLA-2
CLA-3
CLA-4
CLA-5
CLA-6
CLA-8
CLA-10
CLA-12
CLA-14
CLA-16
CLA-20
CLA-24
CLA-32
CLMA-1-1N
CLMA-1-2N
CLMA-2-2N
CLMA-2-4N
CLMA-3-2N
CLMA-3-4N
CLMA-4-2N
CLMA-4-4N
CLMA-4-6N
CLMA-4-8N
CLMA-5-2N
CLMA-5-4N
CLMA-6-2N
CLMA-6-4N
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
2-DATPF-2
4-DATPF-4
4-DATPF-2
4-DATPF-4
4-DATPF-6
4-DATPF-8
5-DATPF-4
6-DATPF-4
6-DATPF-6
6-DATFP-8
8-DATPF-4
8-DATPF-6
8-DATPF-8
10-DATPF-8
12-DATPF-8
12-DATPF-12
12-DATPF-16
16-DATPF-12
16-DATPF-16
20-DATPF-20
24-DATPF-24
N/A#
N/A#
N/A#
DD-2-DPCU-2
4-DPCU-2
4-DPCU-4
6-DPCU-2
6-DPCU-4
6-DPCU-6
8-DPCU-4
8-DPCU-4
8-DPCU-8
12-DPCU-8
12-DPCU-12
16-DPCU-8
16-DPCU-12
16-DPCU-16
1-DELU-1
2-DELU-2
3-DELU-3
4-DELU-4
5-DELU-5
6-DELU-6
8-DELU-8
10-DELU-10
12-DELU-12
14-DELU-14
16-DELU-16
20-DELU-20
24-DELU-24
32-DELU-32
1-DME-1
1-DME-2
2-DME-2
2-DME-4
3-DME-2
3-DME-4
4-DME-2
4-DME-4
4-DME-6
4-DME-8
5-DME-2
5-DME-4
6-DME-2
6-DME-4
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-MNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-FNPT 90
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-MNPT 45
IN-BW 90
IN-BW 90
IN-BW 90
IN-BW 90
IN-BW 90
IN-BW 90
IN-BW 90
IN-BW 90
IN-SW 90
IN-SW 90
IN-SW 90
IN-SW 90
IN-SW 90
IN-SW 90
IN-SW 90
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
600-2-6
600-2-8
600-2-12
810-2-2
810-2-4
810-2-6
810-2-8
810-2-12
1010-2-8
1210-2-8
1210-2-12
1410-2-12
1610-2-12
1610-2-16
2000-2-20
2400-2-24
3200-2-32
200-8-2
200-8-4
300-8-2
400-8-2
400-8-4
400-8-6
400-8-8
500-8-2
500-8-4
600-8-2
600-8-4
600-8-6
600-8-8
810-8-4
810-8-6
810-8-8
1010-8-6
1010-8-8
1210-8-8
1210-8-12
1410-8-12
1610-8-12
1610-8-16
200-5-2
400-5-2
400-5-4
600-5-2
600-5-4
600-5-6
810-5-6
810-5-8
1210-5-12
1610-5-16
400-2-2W
400-2-4W
600-2-4W
810-2-8W
1210-2-12W
1610-2-16W
2000-2-20W
2400-2-24W
400-9-4W
600-9-6W
810-9-8W
1210-9-12W
1610-9-16W
2000-9-20W
2400-9-24W
200-3TTM
200-3-4TTM
400-3TTM
400-3-4TTM
400-3-6TTM
400-3-8TTM
600-3-4TTM
600-3-6TTM
600-3-8TTM
810-3-4TTM
6-6 CBZ
6-8 CBZ
6-12 CBZ
8-2 CBZ
8-4 CBZ
8-6 CBZ
8-8 CBZ
8-12 CBZ
10-8 CBZ
12-8 CBZ
12-12 CBZ
14-12 CBZ
16-12 CBZ
16-16 CBZ
20-20 CBZ
24-24 CBZ
32-32 CBZ
2-2 DBZ
2-4 DBZ
3-2 DBZ
4-2 DBZ
4-4 DBZ
4-6 DBZ
4-8 DBZ
5-2 DBZ
5-4 DBZ
6-2 DBZ
6-4 DBZ
6-6 DBZ
6-8 DBZ
8-4 DBZ
8-6 DBZ
8-8 DBZ
10-6 DBZ
10-8 DBZ
12-8 DBZ
12-12 DBZ
14-12 DBZ
16-12 DBZ
16-16 DBZ
2-2 VBZ
4-2 VBZ
4-4 VBZ
6-2 VBZ
6-4 VBZ
6-6 VBZ
8-6 VBZ
8-8 VBZ
12-12 VBZ
16-16 VBZ
2-1/8 ZEBW2
4-1/4 ZEBW2
6-1/4 ZEBW2
8-1/2 ZEBW2
12-3/4 ZEBW2
16-1 ZEBW2
20-1-1/4 ZEBW2
24-1/2 ZEBW2
4-4 ZEBW
6-6 ZEBW
8-8 ZEBW
12-12 ZEBW
16-16 ZEBW
20-20 ZEBW
24-24 ZEBW
2-2-2 SBZ
2-2-4 SBZ
4-4-2 SBZ
4-4-4 SBZ
4-4-6 SBZ
4-4-8 SBZ
6-6-4 SBZ
6-6-6 SBZ
6-6-8 SBZ
8-8-4 SBZ
6MSEL6N
6MSEL8N
6MSEL12N
8MSEL2N
8MSEL4N
8MSEL6N
8MSEL8N
8MSEL12N
10MSEL8N
12MSEL8N
12MSEL12N
14MSEL12N
16MSEL12N
16MSEL16N
20MSEL20N
24MSEL24N
32MSEL32N
2FEL2N
2FEL4N
3FEL2N
4FEL2N
4FEL4N
4FEL6N
4FEL8N
5FEL2N
5FEL4N
6FEL2N
6FEL4N
6FEL6N
6FEL8N
8FEL4N
8FEL6N
8FEL8N
10FEL6N
10FEL8N
12FEL8N
12FEL12N
14FEL12N
16FEL12N
16FEL16N
2MVEL2N
4MVEL2N
4MVEL4N
6MVEL2N
6MVEL4N
6MVEL6N
8MVEL6N
8MVEL8N
12MVEL12N
16MVEL16N
4-1/8 Z-SSELW2
4-1/4 Z-SSELW2
6-1/4 Z-SSELW2
8-1/2 Z-SSELW2
12-3/4 Z-SSELW2
16-1 Z-SSELW2
20-1-1/4 Z-SSELW2
24-1-1/2 Z-SSELW2
4-4 Z-SSELW
6-6 Z-SSELW
8-8 Z-SSELW
12-12 Z-SSELW
16-16 Z-SSELW
20-20 Z-SSELW
24-24 Z-SSELW
2MBT2N
2MBT4N
4MBT2N
4MBT4N
4MBT6N
4MBT8N
6MBT4N
6MBT6N
6MBT8N
8MBT4N
B r e n n a n
DLN 6-6
DLN 6-8
DLN 6-12-
DLN 8-2
DLN 8-4
DLN 8-6
DLN 8--8
DLN 8-12
DLN 10-8
DLN 12-8
DLN 12-12
DLN 14-12
DLN 16-12
DLN 16-16
DLN 20-20
DLN 24-24
DLN 32-32
DLF 2-2
DLF 2-4
DLF 3-2
DLF 4-2
DLF 4-4
DLF 4-6
DLF 4-8
DLF 5-2
DLF 5-4
DLF 6-2
DLF 6-4
DLF 6-6
DLF 6-8
DLF 8-4
DLF 8-6
DLF 8-8
DLF 10-6
DLF 10-8
DLF 12-8
DLF 12-12
DLF 14-12
DLF 16-12
DLF 16-16
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
DLB 4-2
DLB 4-4
DLB 6-4
DLB 8-8
DLB 12-12
DLB 16-16
DLB 20-20
DLB 24-24
DLW 4-4
DLW 6-6
DLW 8-8
DLW 12-12
DLW 16-16
DLW 20-20
DLW 24-24
DTN 2-2
DTN 2-4
DTN 4-2
DTN 4-4
DTN 4-6
DTN 4-8
DTN 6-4
DTN 6-6
DTN 6-8
DTN 8-4
6LM6
6LM8
6LM12
8LM2
8LM4
8LM6
8LM8
8LM12
10LM8
12LM8
12LM12
14LM12
16LM12
16LM16
20LM20
24LM24
32LM32
2LF2
2LF4
3LF2
4LF2
4LF4
4LF6
4LF8
5LF2
5LF4
6LF2
6LF4
6LF6
6LF8
8LF4
8LF6
8LF8
10LF6
10LF8
12LF8
12LF12
14LF12
16LF12
16LF16
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
4LBW2
4LBW4
6LBW4
8LBW8
12LBW12
16LBW16
20LBW20
24LBW24
4LW4
6LW6
8LW8
12LW12
16LW16
20LW20
24LW24
2TTM2
2TTM4
4TTM2
4TTM4
4TTM6
4TTM8
6TTM4
6TTM6
6TTM8
8TTM4
769L-3/8-3/8
769L-3/8-1/2
769L-3/8-3/4-
769L-1/2-1/8
769L-1/2-1/4
769L-1/2-3/8
769L-1/2-1/2
769L-1/2-3/4
769L-5/8-1/2
769L-3/4-1/2
769L-3/4-3/4
769L-7/8-3/4
769L-1-3/4
769L-1-1
769L-1-1/4-1-1/4
769L-1-1/2-1/1/2
769L-2-2
770L-1/8-1/8
770L-1/8-1/4
770L-3/16-1/8
770L-1/4-1/8
770L-1/4-1/4
770L-1/4-3/8
770L-1/4-1/2
770L-5/16-1/8
770L-5/16-1/4
770L-3/8-1/8
770L-3/8-1/4
770L-3/8-3/8
770L-3/8-1/2
770L-1/2-1/4
770L-1/2-3/8
770L-1/2-1/2
770L-5/8-3/8
770L-5/8-1/2
770L-3/4-1/2
770L-3/4-3/4
770L-7/8-3/4
770L-1-3/4
770L-1-1
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
769LN-1/4-1/8
769LN-1/4-1/4
769LN-3/8-1/4
769LN-1/2-1/2
769LN-3/4-3/4
769LN-1-1
769LN-1-1/4-1-1/4
769LN-1-1/2-1/1/2
769LN-1/4-1/4
769LN-3/8-3/8
769LN-1/2-1/2
769LW-3/4-3/4
769LW-1-1
769LW-1-1/4-1-1/4
769LW-1-1/2-1/1/2
772L-1/8-1/8
772L-1/8-1/4
772L-1/4-1/8
772L-1/4-1/4
772L-1/4-3/8
772L-1/4-1/2
772L-3/8-1/4
772L-3/8-3/8
772L-3/8-1/2
772L-1/2-1/4
I n d u s t r i e s
CLMA-6-6N
CLMA-6-8N
CLMA-6-12N
CLMA-8-2N
CLMA-8-4N
CLMA-8-6N
CLMA-8-8N
CLMA-8-12N
CLMA-10-8N
CLMA-12-8N
CLMA-12-12N
CLMA-14-12N
CLMA-16-12N
CLMA-16-16N
CLMA-20-20N
CLMA-24-24N
CLMA-32-32N
CLF-2-2N
CLF-2-4N
CLF-3-2N
CLF-4-2N
CLF-4-4N
CLF-4-6N
CLF-4-8N
CLF-5-2N
CLF-5-4N
CLF-6-2N
CLF-6-4N
CLF-6-6N
CLF-6-8N
CLF-8-4N
CLF-8-6N
CLF-8-8N
CLF-10-6N
CLF-10-8N
CLF-12-8N
CLF-12-12N
CLF-14-12N
CLF-16-12N
CLF-16-16N
CLMB-2-2N
CLMB-4-2N
CLMB-4-4N
CLMB-6-2N
CLMB-6-4N
CLMB-6-6N
CLMB-8-6N
CLMB-8-8N
CLMB-12-12N
CLMB-16-16N
CLW-2-2P
CLW-4-4P
CLW-6-4P
CLW-8-8P
CLW-12-12P
CLW-16-16P
CLW-20-20P
CLW-24-24P
CLSW-4-4
CLSW-6-6
CLSW-8-8
CLSW-12-12
CLSW-16-16
CLSW-20-20
CLSW-24-24
CBTM-2-2N
CBTM-2-4N
CBTM-4-2N
CBTM-4-4N
CBTM-4-6N
CBTM-4-8N
CBTM-6-4N
CBTM-6-6N
CBTM-6-8N
CBTM-8-4N
6-DME-6
6-DME-8
6-DME-12
8-DME-2
8-DME-4
8-DME-6
8-DME-8
8-DME-12
10-DME-8
12-DME-8
12-DME-12
14-DME-12
16-DME-12
16-DME-16
20-DME-20
24-DME-24
32-DME-32
2-DFE-2
2-DFE-4
3-DFE-2
4-DFE-2
4-DFE-4
4-DFE-6
4-DFE-8
5-DFE-2
5-DFE-4
6-DFE-2
6-DFE-4
6-DFE-6
6-DFE-8
8-DFE-4
8-DFE-6
8-DFE-8
10-DFE-6
10-DFE-8
12-DFE-8
12-DFE-12
14-DFE-12
16-DFE-12
16-DFE-16
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
4-STBWE-2
4-STBWE-4
6-STBWE-4
8-STBWE-8
12-STBWE-12
16-STBWE-16
20-STBWE-20
24-STBWE-24
4-DTSWE-4
6-DTSWE-6
8-DTSWE-8
12-DTSWE-12
16-DTSWE-16
20-DTSWE-20
24-DTSWE-24
2-DTTM-2
2-DTTM-4
4-DTTM-2
4-DTTM-4
4-DTTM-6
4-DTTM-8
6-DTTM-4
6-DTTM-6
6-DTTM-8
8-DTTM-4
43
Brennan
Parker
Parker
TYLOK
No.
Description Swagelok CPI
A-LOK BI-LOK GYROLOK LET-LOK Hy-Lok CBC-LOK
N2601-08-08-06
N2601-08-08-08
N2601-10-10-08
N2601-12-12-08
N2601-12-12-12
N2601-16-16-12
N2601-16-16-16
N2601-20-20-20
N2601-24-24-24
N2602-02-02-02
N2602-04-04-02
N2602-04-04-04
N2602-06-06-04
N2602-06-06-06
N2602-06-06-08
N2602-08-08-04
N2602-08-08-06
N2602-08-08-08
N2602-12-12-12
N2602-16-16-12
N2602-16-16-16
N2603-02-02-02
N2603-03-03-03
N2603-04-04-04
N2603-05-05-05
N2603-06-04-04
N2603-06-04-06
N2603-06-06-04
N2603-06-06-06
N2603-08-04-04
N2603-08-04-08
N2603-08-06-06
N2603-08-06-08
N2603-08-08-04
N2603-08-08-06
N2603-08-08-08
N2603-10-10-10
N2603-12-06-06
N2603-12-06-12
N2603-12-08-08
N2603-12-08-12
N2603-12-12-06
N2603-12-12-08
N2603-12-12-12
N2603-14-14-14
N2603-16-06-06
N2603-16-06-16
N2603-16-08-08
N2603-16-08-16
N2603-16-12-12
N2603-16-12-16
N2603-16-16-06
N2603-16-16-08
N2603-16-16-12
N2603-16-16-16
N2603-20-16-16
N2603-20-16-20
N2603-20-20-16
N2603-20-20-20
N2603-24-16-16
N2603-24-16-24
N2603-24-24-16
N2603-24-24-24
N2603-32-32-32
N2605-02-02-02
N2605-02-04-02
N2605-04-02-04
N2605-04-04-04
N2605-04-06-04
N2605-04-08-04
N2605-06-04-06
N2605-06-06-06
N2605-06-08-06
N2605-08-04-08
N2605-08-06-08
44
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-MNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-FNPT
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-IN-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
810-3TTM
810-3-8TTM
1010-3TTM
1210-3-8TTM
1210-3TTM
1610-3-12TTM
1610-3TTM
2000-3-20TTM
2400-3-24TTM
200-3TTF
400-3TTF
400-3-4TTF
600-3TTF
600-3-6TTF
600-3-8TTF
810-3-4TTF
810-3TTF
810-3-8TTF
1210-3TTF
1610-3TTF
1610-3-16TTF
200-3
300-3
400-3
500-3
600-3-4-4
600-3-4-6
600-3-6-4
600-3
810-3-4-4
810-3-4-8
810-3-6-6
810-3-6-8
810-3-8-4
810-3-8-6
810-3
1010-3
1210-3-6-6
1210-3-6-12
1210-3-8-8
1210-3-8-12
1210-3-12-6
1210-3-12-8
1210-3
1410-3
1610-3-6-6
1610-3-6-16
1610-3-8-8
1610-3-8-16
1610-3-12-12
1610-3-12-16
1610-3-16-6
1610-3-16-8
1610-3-16-12
1610-3
2000-3-16-16
2000-3-16-20
2000-3-20-16
2000-3
2400-3-16-16
2400-3-16-24
2400-3-16-16
2400-3
3200-3
200-3TMT
200-3-4TMT
400-3TMT
400-3-4TMT
400-3-6TMT
400-3-8TMT
600-3TMT
600-3-6TMT
600-3-8TMT
810-3-4TMT
810-3TMT
8-8-6 SBZ
8-8-8 SBZ
10-10-8 SBZ
12-12-8 SBZ
12-12-12 SBZ
16-16-12 SBZ
16-16-16 SBZ
20-20-20 SBZ
24-24-24 SBZ
2-2-2 OBZ
4-4-2 OBZ
4-4-4 OBZ
6-6-4 OBZ
6-6-6 OBZ
6-6-8 OBZ
8-8-4 OBZ
8-8-6 OBZ
8-8-8 OBZ
12-12-12 OBZ
16-16-12 OBZ
16-16-16 OBZ
2-2-2 JBZ
3-3-3 JBZ
4-4-4 JBZ
5-5-5 JBZ
6-4-4 JBZ
6-4-6 JBZ
6-6-4 JBZ
6-6-6 JBZ
8-4-4 JBZ
8-4-8 JBZ
8-6-6 JBZ
8-6-8 JBZ
8-8-4 JBZ
8-8-6 JBZ
8-8-8 JBZ
10-10-10 JBZ
12-6-6 JBZ
12-6-12 JBZ
12-8-8 JBZ
12-8-12 JBZ
12-12-6 JBZ
12-12-8 JBZ
12-12-12 JBZ
14-14-14 JBZ
16-6-6 JBZ
16-6-16 JBZ
16-8-8 JBZ
16-8-16 JBZ
16-12-12 JBZ
16-12-16 JBZ
16-16-6 JBZ
16-16-8 JBZ
16-16-12 JBZ
16-16-16 JBZ
20-16-16 JBZ
20-16-20 JBZ
20-20-16 JBZ
20-20-20 JBZ
24-16-16 JBZ
24-16-24 JBZ
24-24-16 JBZ
24-24-24 JBZ
32-32-32 JBZ
2-2-2 RBZ
2-4-2 RBZ
4-2-4 RBZ
4-4-4 RBZ
4-6-4 RBZ
4-8-4 RBZ
6-4-6 RBZ
6-6-6 RBZ
6-8-6 RBZ
8-4-8 RBZ
8-6-8 RBZ
8MBT6N
8MBT8N
10MBT8N
12MBT8N
12MBT12N
16MBT12N
16MBT16N
20MBT20N
24MBT24N
2FBT2N
4FBT2N
4FBT4N
6FBT4N
6FBT6N
6FBT8N
8FBT4N
8FBT6N
8FBT8N
12FBT12N
16FBT12N
16FBT16N
2ET2
3ET3
4ET4
5ET5
6-4-4 JLZ
6-4-6 JLZ
6-6-4 JLZ
6ET6
8-4-4 JLZ
8-4-8 JLZ
8-6-6 JLZ-
8-6-8 JLZ
8-8-4 JLZ
8-8-6 JLZ
8ET8
10 ET10
12-6-6 JLZ
12-6-12 JLZ
12-8-8 JLZ
12-8-12 JLZ
12-12-6 JLZ
12-12-8 JLZ
12ET12
14ET14
16-6-6 JLZ
16-6-16 JLZ
16-8-8 JLZ
16-8-16 JLZ
16-12-12 JLZ
16-12-16 JLZ
16-16-6 JLZ
16-16-8 JLZ
16-16-12 JLZ
16ET16
20-16-16 JLZ
20-16-20 JLZ
20-20-16 JLZ
20ET20
24-16-16 JLZ
24-16-24 JLZ
24-24-16 JLZ
24ET24
32ET32
2MRT2N
2MRT4N
4MRT2N
4MRT4N
4MRT6N
4MRT8N
6MRT4N
6MRT6N
6MRT8N
8MRT4N
8MRT6N
B r e n n a n
DTN 8-6
DTN 8-8
DTN 10-8
DTN 12-8
DTN 12-12
DTN 16-12
DTN 16-16
DTN 20-20
DTN 24-24
DTH 2-2
DTH 4-2
DTH 4-4
DTH 6-4
DTH 6-6
DTH 6-8
DTH 8-4
DTH 8-6
DTH 8-8
DTH 12-12
DTH 16-12
DTH 16-16
DTA 2
DTA 3
DTA 4
DTA 5
DTR 6-4-4
DTR 6-4-6
DTR 6-6-4
DTA 6
DTR 8-4-4
DTR 8-4-8
DTR 8-6-6
DTR 8-6-8
DTR 8-8-4
DTR 8-8-6
DTA 8
DTA 10
DTR 12-6-6
DTR 12-6-12
DTR 12-8-8
DTR 12-8-12
DTR 12-12-6
DTR 12-12-8
DTA 12
DTA 14
DTR 16-6-6
DTR 16-6-16
DTR 16-8-8
DTR 16-8-16
DTR 16-12-12
DTR 16-12-16
DTR 16-16-6
DTR 16-16-8
DTR 16-16-12
DTA 16
DTR 20-16-16
DTR 20-16-20
DTR 20-20-16
DTA 20
DTR 24-16-16
DTR 24-16-24
DTR 24-24-16
DTA 24
DTA 32
DTK 2-2
DTK 2-4
DTK 4-2
DTK 4-4
DTK 4-6
DTK 4-8
DTK 6-4
DTK 6-6
DTK 6-8
DTK 8-4
DTK 8-6
8TTM6
8TTM8
10TTM8
12TTM8
12TTM12
16TTM12
16TTM16
20TTM20
24TTM24
2TTF2
4TTF2
4TTF4
6TTF4
6TTF6
6TTF8
8TTF4
8TTF6
8TTF8
12TTF12
16TTF12
16TTF16
2TTT
3TTT
4TTT
5TTT
N/A#
N/A#
N/A#
6TTT
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
8TTT
10TTT
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
12TTT
14TTT
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
16TTT
N/A#
N/A#
N/A#
20TTT
N/A#
N/A#
N/A#
24TTT
32TTT
2TMT2
2TMT4
4TMT2
4TMT4
4TMT6
4TMT8
6TMT4
6TMT6
6TMT8
8TMT4
8TMT6
772L-1/2-3/8
772L-1/2-1/2
772L-5/8-1/2
772L-3/4-1/2
772L-3/4-3/4
772L-1-3/4
772L-1-1
772L-1-1/4-1-1/4
772L-1-1/2-1-1/4
772LF-1/8-1/8
772LF-1/4-1/8
772LF-1/4-1/4
772LF-3/8-1/4
772LF-3/8-3/8
772LF-3/8-1/2
772LF-1/2-1/4
772LF-1/2-3/8
772LF-1/2-1/2
772LF-3/4-3/4
772LF-1-3/4
772LF-1-1
764L-1/8
764L-3/16
764L-1/4
764L-5/16
764LR-3/8-1/4-1/4
764LR-3/8-1/4-3/8
764LR-3/8-3/8-1/4
764L-3/8
764LR-1/2-1/4-1/4
764LR-1/2-1/4-1/2
764LR-1/2-3/8-3/8
764LR-1/2-3/8-1/2
764LR-1/2-1/2-1/4
764LR-1/2-1/2-3/8
764L-1/2
764L-5/8
764LR-3/4-3/8-3/8
764LR-3/4-3/8-3/4
764LR-3/4-1/2-1/2
764LR-3/4-1/2-3/4
764LR-3/4-3/4-3/8
764LR-3/4-3/4-1/2
764L-3/4
764L-7/8
764LR-1-3/8-3/8
764LR-1-3/8-1
764LR-1-1/2-1/2
764LR-1-1/2-1
764LR-1-3/4-3/4
764LR-1-3/4-1
764LR-1-1-3/8
764LR-1-1-1/2
764LR-1-1-3/4
764L-1
764LR-1 1/4-1-1
764LR-1 1/4-1-1/80
764LR-1 1/4-1-1/4-1
764L-1 1/4
764LR-1 1/2-1-1
764LR-1 1/2-1-1 1/4
764LR-1 1/2 1/1/2-1
764L-1 1/2
764L-2
771L-1/8-1/8
771L-1/8-1/4
771L-1/4-1/8
771L-1/4-1/4
771L-1/4-3/8
771L-1/4-1/2
771L-3/8-1/4
771L-3/8-3/8
771L-3/8-1/2
771L-1/2-1/4
771L-1/2-3/8
I n d u s t r i e s
CBTM-8-6N
CBTM-8-8N
CBTM-10-8N
CBTM-12-8N
CBTM-12-12N
CBTM-16-12N
CBTM-16-16N
CBTM-20-20N
CBTM-24-24N
CBTF-2-2N
CBTF-4-2N
CBTF-4-4N
CBTF-6-4N
CBTF-6-6N
CBTF-6-8N
CBTF-8-4N
CBTF-8-6N
CBTF-8-8N
CBTF-12-12N
CBTF-16-12N
CBTF-16-16N
CTA-2
CTA-3
CTA-4
CTA-5
CTR-6-4-4
CTR-6-4-6
CTR-6-6-4
CTA-6
CTR-8-4-4
CTR-8-4-8
CTR-8-6-6
CTR-8-6-8
CTR-8-8-4
CTR-8-8-6
CTA-8
CTA-10
CTR-12-6-6
CTR-12-6-12
CTR-12-8-8
CTR-12-8-12
CTR-12-12-6
CTR-12-12-8
CTA-12
CTA-14
CTR-16-6-6
CTR-16-6-16
CTR-16-8-8
CTR-16-8-16
CTR-16-12-12
CTR-16-12-16
CTR-16-16-6
CTR-16-16-8
CTR-16-16-12
CTA-16
CTR-20-16-16
CTR-20-16-20
CTR-20-20-16
CTA-20
CTR-24-16-16
CTR-24-16-24
CTR-24-24-16
CTA-24
CTA-32
CRTM-2-2N
CRTM-2-4N
CRTM-4-2N
CRTM-4-4N
CRTM-4-6N
CRTM-4-8N
CRTM-6-4N
CRTM-6-6N
CRTM-6-8N
CRTM-8-4N
CRTM-8-6N
8-DTTM-6
8-DTTM-8
10-DTTM-8
12-DTTM-8
12-DTTM-12
16-DTTM-12
16-DTTM-16
20-DTTM-20
24-DTTM-24
2-DTTF-2
4-DTTF-2
4-DTTF-4
6-DTTF-4
6-DTTF-6
6-DTTF-8
8-DTTF-4
8-DTTF-6
8-DTTF-8
12-DTTF-12
16-DTTF-12
16-DTTF-16
2-DTTT-2
3-DTTT-3
4-DTTT-4
5-DTTT-5
6-DTTT-4-4
6-DTTT-4-6
6-DTTT-6-4
6-DTTT-6
8-DTTT-4-4
8-DTTT-64-8
8-DTTT-6-6
8-DTTT-6-8
8-DTTT-8-4
8-DTTT-8-6
8-DTTT-8
10-DTTT-10
12-DTTT-6-6
12-DTTT-6-12
12-DTTT-8-8
12-DTTT-8-12
12-DTTT-12-6
12-DTTT-12-8
12-DTTT-12
14-DTTT-14
16-DTTT-6-6
16-DTTT-6-16
16-DTTT-8-8
16-DTTT-8-16
16-DTTT-12-12
16-DTTT-12-16
16-DTTT-16-6
16-DTTT-16-8
16-DTTT-16-12
16-DTTT-16
20-DTTT-16-16
20-DTTT-16-20
20-DTTT-20-16
20-DTTT-20
24-DTTT-16-16
24-DTTT-16-24
24-DTTT-24-16
24-DTTT-24
32-DTTT-32
2-DTMT-2
2-DTMT-4
4-DTMT-2
4-DTMT-4
4-DTMT-6
4-DTMT-8
6-DTMT-4
6-DTMT-6
6-DTMT-8
8-DTMT-4
8-DTMT-6
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-MNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-FNPT-IN
IN-IN-IN-IN
IN-IN-IN-IN
IN-IN-IN-IN
IN-IN-IN-IN
IN-IN-IN-IN
IN-IN-IN-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN
INBH-IN 90
INBH-IN 90
INBH-IN 90
INBH-IN 90
INBH-IN 90
INBH-IN 90
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-FNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MNPT
INBH-MJ
INBH-MJ
INBH-MJ
810-3-8TMT
1010-3TMT
1210-3-8TMT
1210-3TMT
1610-3-12TMT
1610-3TMT
2000-3TMT
2400-3TMT
200-3-2-TFT
400-3TFT
400-3-4TFT
600-3TFT
600-3-6TFT
810-3TFT
810-3-8TFT
1210-3TFT
1610-3-12-TFT
1610-3TFT
200-4
400-4
600-4
810-4
1210-4
1610-4
100-61
200-61
300-61
400-61-2
400-61
500-61
600-61-4
600-61
810-61-4
810-61-6
810-61
1010-61
1210-61
1610-61
2000-61
2400-61
3200-61
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
200-71-2
400-71-2
400-71-4
600-71-4
810-71-6
810-71-8
1010-71-8
1210-71-8
1210-71-12
1610-71-12
1610-71-16
2000-71-20
2400-71-24
200-11-2
400-11-2
400-11-4
600-11-4
600-11-6
600-11-8
810-11-6
810-11-8
1210-11-12
1610-11-16
2000-11-20
2400-11-24
400-61-4AN
600-61-6AN
810-61-8AN
8-8-8 RBZ
10-8-10 RBZ
12-8-12 RBZ
12-12-12 RBZ
16-12-16 RBZ
16-16-16 RBZ
20-20-20 RBZ
24-24-24 RBZ
2-2-2 MBZ
4-2-4 MBZ
4-4-4 MBZ
6-4-6 MBZ
6-6-6 MBZ
8-6-8 MBZ
8-8-8 MBZ
12-12-12 MBZ
16-12-16 MBZ
16-16-16 MBZ
2 KBZ
4 KBZ
6KBZ
8 KBZ
12 KBZ
16 KBZ
1-1 WBZ
2-2 WBZ
3-3 WBZ
4-2 WBZ
4-4 WBZ
5-5 WBZ
6-4 WBZ
6-6 WBZ
8-4 WBZ
8-6 WBZ
8-8 WBZ
10-10 WBZ
12-12 WBZ
16-16 WBZ
20-20 WBZ
24-24 WBZ
32-32 WBZ
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
2-2 GH2BZ
4-2 GH2BZ
4-4 GH2BZ
6-4 GH2BZ
8-6 GH2BZ
8-8 GH2BZ
10-8 GH2BZ
12-8 GH2BZ
12-12 GH2BZ
16-12 GH2BZ
16-16 GH2BZ
20-20 GH2BZ
24-24 GH2BZ
2-2 FH2BZ
4-2 FH2BZ
4-4 FH2BZ
6-4 FH2BZ
6-6 FH2BZ
6-8 FH2BZ
8-6 FH2BZ
8-8 FH2BZ
12-12 FH2BZ
16-16 FH2BZ
20-20 FH2BZ
24-24 FH2BZ
4-4 XH2BZ
6-6 XH2BZ
8-8 XH2BZ
8MRT8N
10MRT8N
12MRT8N
12MRT12N
16MRT12N
16MRT16N
20MRT20N
24MRT24N
2FRT2N
4FRT2N
4FRT4N
6FRT4N
6FRT6N
8FRT6N
8FRT8N
12FRT12N
16FRT12N
16FRT16N
2ECR2
4ECR4
6ECR6
8ECR8
12ECR12
16ECR16
1MBC1N
2MBC2N
3MBC3N
4MBC2N
4MBC4N
5MBC5
6MBC4
6MBC6
8MBC4
8MBC6N
8MBC8N
10BC10
12BC12
16BC16
20BC20
24BC24
32BC32
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
2FBC2N
4FBC2N
4FBC4N
6FBC4N
8FBC6N
8FBC8N
10FBC8N
12FBC8N
12FBC12N
16FBC12N
16FBC16N
20FBC20N
24FBC24N
2MBC2N
4MBC2N
4MBC4N
6MBC4N
6MBC6N
6MBC8N
8MBC6N
8MBC8N
12MBC12N
16MBC16N
20MBC20N
24MBC24N
4XABC4
6XABC6
8XABC8
B r e n n a n
DTK 8-8
DTK 10-8
DTK 12-8
DTK 12-12
DTK 16-12
DTK 16-16
DTK 20-20
DTK 24-24
DTF 2-2
DTF 4-2
DTF 4-4
DTF 6-4
DTF 6-6
DTF 8-6
DTF 8-8
DTF 12-12
DTF 16-12
DTF 16-16
DXA 2
DXA 4
DXA 6
DXA 8
DXA 12
DXA 16
DSU 1
DSU 2
DSU 3
DSU 4-2
DSU 4
DSU 5
DSU 6-4
DSU 6
DSU 8-4
DSU 8-6
DSU 8
DSU 1
DSU 12
DSU 16
DSU 20
DSU 24
DSU 32
DSL 2
DSL 4
DSL 6
DSL 8
DSL 12
DSL 16
DSS 2-2
DSS 4-2
DSS 4-4
DSS 6-4
DSS 8-6
DSS 8-8
DSS 10-8
DSS 12-8
DSS 12-12
DSS 16-12
DSS 16-16
DSS 20-20
DSS 24-24
DSC 2-2
DSC 4-2
DSC 4-4
DSC 6-4
DSC 6-6
DSC 6-8
DSC 8-6
DSC 8-8
DSC 12-12
DSC 16-16
DSC 20-20
DSC 24-24
DUE 4-4
DUE 6-6
DUE 8-8
8TMT8
10TMT8
12TMT8
12TMT12
16TMT12
16TMT16
20TMT20
24TMT24
2TFT2
4TFT2
4TFT4
6TFT4
6TFT6
8TFT6
8TFT8
12TFT12
16TFT12
16TFT16
2C
4C
6C
8C
12C
16C
1BU
2BU
3 BU
4BU2
4BU
5BU
6BU4
6BU6
8BU4
8BU6
8BU
10BU
12BU
16BU
20BU
24BU
32BU
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
2BCF2
4BCF2
4BCF4
6BCF4
8BCF6
8BCF8
10BCF8
12BCF8
12BCF12
16BCF12
16BCF16
20BCF20
24BCF24
2BCM2
4BCM2
4BCM4
6BCM4
6BCM6
6BCM8
8BCM6
8BCM8
12BCM12
16BCM16
20BCM20
24BCM24
4BUAN4
6BUAN6
8BUAN8
771L-1/2-1/2
771L-5/8-1/2
771L-3/4-1/2
771L-3/4-3/4
771L-1-3/4
771L-1-1
771L-1 1/4-1 1/4
771L-1 1/2 1/1/2
771LF-1/8-1/8
771LF-1/4-1/8
771LF-1/4-1/4
771LF-3/8-1/4
771LF-3/8-3/8
771LF-1/2-3/8
771LF-1/2-1/2
771LF-3/4-3/4
771LF-1-3/4
771LF-1-1
7102L-1/8
7102L-1/4
7102L-3/8
7102L-1/2
7102L-3/4
7102L-1
774L-1/16-1/16
774L-1/8-1/8
774L-3/16-3/16
774L-1/4-1/8
774L-1/4-1/4
774L-5/16-5/16
774L-3/8-1/4
774L-3/8-3/8
774L-1/2-1/4
774L-1/2-3/8
774L-1/2-1/2
774L-5/8-5/8
774L-3/4-3/4
774L-1-1
774L-1 1/4-1 1/4
774L-1 1/2-1 1/2
774L-2-2
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
774LF-1/8-1/8
774LF-1/4-1/8
774LF-1/4-1/4
774LF-3/8-1/4
774LF-1/2-3/8
774LF-1/2-1/2
774LF-5/8-1/2
774LF-3/4-1/2
774LF-3/4-3/4
774LF-1-3/4
774LF-1-1
774LF-1 1/4-1 1/4
774LF-1 1/2-1 1/2
774LM-1/8-1/8
774LM-1/4-1/8
774LM-1/4-1/4
774LM-3/8-1/4
774LM-3/8-3/8
774LM-3/8-1/2
774LM-1/2-3/8
774LM-1/2-1/2
774LM-3/4-3/4
774LM-1-1
774LM-1 1/4-1 1/4
774LM-1 1/2-1 1/2
774LFL-1/4-1/4
774LFL-3/8-3/8
774LFL-1/2-1/2
I n d u s t r i e s
CRTM-8-8N
CRTM-10-8N
CRTM-12-8N
CRTM-12-12N
CRTM-16-12N
CRTM-16-16N
CRTM-20-20N
CRTM-24-24N
CRTF-2-2N
CRTF-4-2N
CRTF-4-4N
CRTF-6-4N
CRTF-6-6N
CRTF-8-6N
CRTF-8-8N
CRTF-12-12N
CRTF-16-12N
CRTF-16-16N
CXA-2
CXA-4
CXA-6
CXA-8
CXA-12
CXA-16
CBU-1
CBU-2
CBU-3
CBUR-4-2
CBU-4
CBU-5
CBUR-6-4
CBU-6
CBUR-8-4
CBUR-8-6
CBU-8
CBU-10
CBU-12
CBU-16
CBU-20
CBU-24
CBU-32
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
CBFC-2-2N
CBFC-4-2N
CFBC-4-4N
CBFC-6-4N
CBFC-8-6N
CBFC-8-8N
CBFC-10-8N
#N/A
CBFC-12-12N
#N/A
CBFC-16-16N
CBFC-20-20N
CBFC-24-24N
CBMC-2-2N
CBMC-4-2N
CBMC-4-4N
CBMC-6-4N
CBMC-6-6N
CBMC-6-8N
CBMC-8-6N
CBMC-8-8N
CBFC-12-12N
CBMC-16-16N
CBMC-20-20N
CBMC-24-24N
CBFU-4-4
CBFU-6-6
CBFU-8-8
8-DTMT-8
10-DTMT-8
12-DTMT-8
12-DTMT-12
16-DTMT-12
16-DTMT-16
20-DTMT-20
24-DTMT-24
2-DTFT-2
4-DTFT-2
4-DTFT-4
6-DTFT-4
6-DTFT-6
8-DTFT-6
8-DTFT-8
12-DTFT-12
16-DTFT-12
16-DTFT-16
2-DCR
4-DCR
6-DCR
8-DCR
12-DCR
16-DCR
1-DBHU-1
2-DBHU-2
3-DBHU-3
4-DBHU-2
4-DBHU-4
5-DBHU-5
6-DBHU-4
6-DBHU-6
8-DBHU-4
8-DBHU-6
8-DBHU-8
10-DBHU-10
12-DBHU-12
16-DBHU-16
20-DBHU-20
24-DBHU-24
32-DBHU-32
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
2-DBHFP-2
4-DBHFP-2
4-DBHFP-4
6-DBHFP-4
8-DBHFP-6
8-DBHFP-8
10-DBHFP-8
12-DBHFP-8
12-DBHFP-12
16-DBHFP-12
16-DBHFP-16
20-DBHFP-20
24-DBHFP-24
2-DBHMP-2
4-DBHMP-2
4-DBHMP-4
6-DBHMP-4
6-DBHMP-6
6-DBHMP-8
8-DBHMP-6
8-DBHMP-8
12-DBHMP-12
16-DBHMP-16
20-DBHMP-20
24-DBHMP-24
4-DBUANF-4
6-DBUANF-6
8-DBUANF-8
45
Brennan
Parker
Parker
TYLOK
No.
Description Swagelok CPI
A-LOK BI-LOK GYROLOK LET-LOK Hy-Lok CBC-LOK
N2707-LN-12-12
N2707-LN-16-16
N2709-LN-02-02
N2709-LN-04-04
N2709-LN-06-06
N2709-LN-08-08
N2709-LN-10-10
N2709-LN-16-16
N2709-LN-20-20
N2709-LN-24-24
N6400-02-02-O
N6400-02-04-O
N6400-04-04-O
N6400-04-06-O
N6400-04-08-O
N6400-05-05-O
N6400-06-04-O
N6400-06-06-O
N6400-06-08-O
N6400-06-10-O
N6400-08-06-O
N6400-08-08-O
N6400-08-10-O
N6400-10-10-O
N6400-12-08-O
N6400-12-12-O
N6400-12-16-O
N6400-16-12-O
N6400-16-16-O
N6400-20-20-O
N6400-24-24-O
N6801-04-04-NWO
N6801-04-06-NWO
N6801-06-04-NWO
N6801-06-06-NWO
N6801-06-08-NWO
N6801-08-08-NWO
N6801-10-10-NWO
N6801-12-12-NWO
N6801-14-14-NWO
N6801-16-16-NWO
N6801-20-20-NWO
N6801-24-24-NWO
N6802-04-04-NWO
N6802-06-06-NWO
N6802-08-08-NWO
N6802-12-12-NWO
N6802-16-16-NWO
N6803-04-04-04-NWO
N6803-06-06-06-NWO
N6803-08-08-08-NWO
N6803-12-12-12-NWO
N6803-16-16-16-NWO
N6803-20-20-20-NWO
N6803-24-24-24-NWO
N6804-04-04-04-NWO
N6804-06-06-06-NWO
N6804-08-08-08-NWO
N6804-12-12-12-NWO
N6804-16-16-16-NWO
N6804-20-20-20-NWO
N6804-24-24-24-NWO
N7000-02-02
N7000-02-04
N7000-04-02
N7000-04-04
N7000-04-06
N7000-04-08
N7000-05-02
N7000-05-04
N7000-06-02
N7000-06-04
N7000-06-06
N7000-06-08
N7000-08-04
46
INBH-MJ
INBH-MJ
INBH-STDPIPE
INBH-STDPIPE
INBH-STDPIPE
INBH-STDPIPE
INBH-STDPIPE
INBH-STDPIPE
INBH-STDPIPE
INBH-STDPIPE
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MORB
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB 90
IN-MAORB-45
IN-MAORB-45
IN-MAORB-45
IN-MAORB-45
IN-MAORB-45
IN-IN-MAORB
IN-IN-MAORB
IN-IN-MAORB
IN-IN-MAORB
IN-IN-MAORB
IN-IN-MAORB
IN-IN-MAORB
IN-MAORB-IN
IN-MAORB-IN
IN-MAORB-IN
IN-MAORB-IN
IN-MAORB-IN
IN-MAORB-IN
IN-MAORB-IN
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
1210-61-12AN
1610-61-16AN
200-R1-2
400-R1-4
600-R1-6
810-R1-8
1010-R-10
1610-R1-16
2000-R1-20
2400-R1-24
200-1-2ST
200-1-4ST
400-1-4ST
400-1-6ST
400-1-8ST
500-1-5ST
600-1-4ST
600-1-6ST
600-1-8ST
600-1-10ST
810-1-6ST
810-1-8ST
810-1-10ST
1010-1-10ST
1210-1-8ST
1210-1-12ST
1210-1-16ST
1610-1-12ST
1610-1-16ST
2000-1-20ST
2400-1-24ST
400-2-4ST
400-2-6ST
600-2-4ST
600-2-6ST
600-2-8ST
810-2-8ST
1010-2-10ST
1210-2-12ST
1410-2-14ST
1610-2-16ST
2000-2-20ST
2400-2-24ST
400-5-4ST
600-5-6ST
810-5-8ST
1210-5-12ST
1610-5-16ST
400-3TTS
600-3TTS
810-3TTS
1210-3TTS
1610-3TTS
2000-3TTS
2400-3TTS
400-3TST
600-3TST
810-3TST
1210-3TST
1610-3TST
2000-3TST
2400-3TST
200-1-2RT
200-1-4RT
400-1-2RT
400-1-4RT
400-1-6RT
400-1-8RT
500-1-2RT
500-1-4RT
600-1-2RT
600-1-4RT
600-1-6RT
600-1-8RT
810-1-4RT
12-12 XH2BZ
16-16 XH2BZ
2-2 T2H2BZ
4-4 T2H2BZ
6-6 T2H2BZ
8-8 T2H2BZ
10-10 T2H2BZ
16-16 T2H2BZ
20-20 T2H2BZ
24-24 T2H2BZ
2-2 ZHBA
2-4 ZHBA
4-4 ZHBA
4-6 ZHBA
4-8 ZHBA
5-5 ZHBA
6-4 ZHBA
6-6 ZHBA
6-8 ZHBA
6-10 ZHBA
8-6 ZHBA
8-8 ZHBA
8-10 ZHBA
10-10 ZHBA
12-8 ZHBA
12-12 ZHBA
12-16 ZHBA
16-12 ZHBA
16-16 ZHBA
20-20 ZHBA
24-24 ZHBA
4-4 C5BZ
4-6 C5BZ
6-4 C5BZ
6-6 C5BZ
6-8 C5BZ
8-8 C5BZ
10-10 C5BZ
12-12 C5BZ
14-14 C5BZ
16-16 C5BZ
20-20 C5BZ
24-24 C5BZ
4-4 V5BZ
6-6 V5BZ
8-8 V5BZ
12-12 V5BZ
16-16 V5BZ
4-4 S5BZ
6-6 S5BZ
8-8 S5BZ
12-12 S5BZ
16-16 S5BZ
20-20 S5BZ
24-24 S5BZ
4-4-4 R5BZ
6-6-6 R5BZ
8-8-8 R5BZ
12-12-12 R5BZ
16-16-16 R5BZ
20-20-20 R5BZ
24-24-24 R5BZ
2-2K FBZ
2-4K FBZ
4-2K FBZ
4-4K FBZ
4-6K FBZ
4-8K FBZ
5-2K FBZ
5-4K FBZ
6-2K FBZ
6-4K FBZ
6-6K FBZ
6-8K FBZ
8-4K FBZ
12XABC12
16XABC16
2TUBC2
4TUBC4
6TUBC6
8TUBC8
10TUBC10
16TUBC16
20TUBC20
24TUBC24
2M1SC2
2M1SC4
4M1SC4
4M1SC6
4M1SC8
5M1SC5
6MOSC4
6M1SC6
6M1SC8
6M1SC10
8M1SC6
8M1SC8
8M1SC10
10M1SC10
12M1SC8
12M1SC12
12M1SC16
16M1SC12
16M1SC16
20M1SC20
24M1SC24
4M5SEL4
4M5SEL6
6M5SEL4
6M5SEL6
6M5SEL8
8M5SEL8
10M5SEL10
12M5SEL12
14M5SEL14
16M5SEL16
20M5SEL20
24M5SEL24
4M5VEL4
6M5VEL6
8M5VEL8
12M5VEL12
16M5VEL16
4M5BT4
6M5BT6
8M5BT8
12M5BT12
16M5BT16
20M5BT20
24M5BT24
4M5RT4
6M5RT6
8M5RT8
12M5RT12
16M5RT16
20M5RT20
24M5RT24
2MSC2K
2MSC4K
4MSC2K
4MSC4K
4MSC6K
4MSC8K
5MSC2K
5MSC4K
6MSC2K
6MSC4K
6MSC6K
6MSC8K
8MSC4K
B r e n n a n
DUE 12-12
DUE 16-16
DSE 2
DSE 4
DSE 6
DSE 8
DSE 10
DSE 16
DSE 20
DSE 24
DCU 2-2
DCU 2-4
DCU 4-4
DCU 4-6
DCU 4-8
DCU 5-5
DCU 6-4
DCU 6-6
DCU 6-8
DCU 6-10
DCU 8-6
DCU 8-8
DCU 8-10
DCU 10-10
DCU 12-8
DCU 12-12
DCU 12-16 S
DCU 16-12
DCU 16-16
DCU 20-20
DCU 24-24
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
12BUAN12
16BUAN16
2BA2
4BA4
6BA6
8BA8
10BA10
16BA16
20BA20
24BA24
2UANO2
2UAN04
4UANO4
4UANO6
4UANO8
5UANO5
6UANO4
6UANO6
6UANO8
6UANO10
8UANO6
8UANO8
8UANO10
10UANO10
12UANO8
12UANO12
12UANO16
16UANO12
16UANO16
20UANO20
24UANO24
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
774LFL-3/4-3/4
774LFL-1-1
774LT-1/8-1/8
774LT-1/4-1/4
774LT-3/8-3/8
774LT-1/2-1/2
774LT-5/8-5/8
774LT-1-1
774LT-1 1/4-1 1/4
774LT-1 1/2-1 1/2
768LOB-1/8-1/8
768LOB-1/8-1/4
768LOB-1/4-1/4
768LOB-1/4-3/8
768LOB-1/4-1/2
768LOB-5/16-5/16
768LOB-3/8-1/4
768LOB-3/8-3/8
768LOB-3/8-1/2
768LOB-3/8-5/8
768LOB-1/2-3/8
768LOB-1/2-1/2
768LOB-1/2-5/8
768LOB-5/8-58
768LOB-3/4-1/2
768LOB-3/4-3/4
768LOB-3/4-1
768LOB-1-3/4
768LOB-1-1
768LOB-1 1/4-1 1/4
768LOB-1 1/2-1 1/2
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
I n d u s t r i e s
CBFU-12-12
CBFU-16-16
CBR-2-2
CBR-4-4
CBR-6-6
CBR-8-8
CBR-10-10
CBR-16-16
CBR-20-20
CBR-24-24
CSC-2-2U
CSC-2-4U
CSC-4-4U
CSC-4-6U
CSC-4-8U
CSC-5-5U
CSC-6-4U
CSC-6-6U
CSC-6-8U
CSC-6-10U
CSC-8-6U
CSC-8-8U
CSC-8-10U
CSC-10-10U
CSC-12-8U
CSC-12-12U
CSC-12-16U
CSC-16-12U
CSC-16-16U
CSC-20-20U
CSC-24-24U
CSLA-4-4U
CSLA-4-6U
CSLA-6-4U
CSLA-6-6U
CSLA-6-8U
CSLA-8-8U
CSLA-10-10U
CSLA-12-12U
CSLA-14-14U
CSLA-16-16U
CSLA-20-20U
CSLA-24-24U
CSLB-4-4U
CSLB-6-6U
CSLB-8-8U
CSLB-12-12U
CSLB-16-16U
CSBT-4-4U
CSBT-6-6U
CSBT-8-8U
CSBT-12-12U
CSBT-16-16U
CSBT-20-20U
CSBT-24-24U
CSRT-4-4U
CSRT-6-6U
CSRT-8-8U
CSRT-12-12U
CSRT-16-16U
CSRT-20-20U
CSRT-24-24U
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
12-DBUANF-12
16-DBUANF-16
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
2-DMC-ORS
2-DMC-4
4-DMC-ORS
4-DMC-6-ORS
4-DMC-8-ORS
5-DMC-ORS
6-DMC-04-ORS
6-DMC-ORS
6-DMC-8-ORS
6-DMC-10-ORS
8-DMC-6-ORS
8-DMC-ORS
8-DMC-10-ORS
10-DMC-ORS
12-DMC-8-ORS
12-DMC-ORS
12-DMC-16-ORS
16-DMC-12-ORS
16-DMC-16-ORS
20-DMC-20-ORS
24-DMC-24-ORS
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPT
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
IN-MBSPP 90
810-1-6RT
810-1-8RT
1210-1-12RT
1610-1-16RT
200-1-2RS
200-1-4RS
400-1-2RS
400-1-4RS
400-1-6RS
400-1-8RS
600-1-2RS
600-1-4RS
600-1-6RS
600-1-8RS
810-1-4RS
810-1-6RS
810-1-8RS
1210-1-8RS
1210-1-12RS
1610-1-8RS
1610-1-12RS
1610-1-16RS
400-2-2PR
400-2-4PR
600-2-4PR
600-2-6PR
810-2-4PR
810-2-6PR
810-2-8PR
1010-2-8PR
1210-2-8PR
1210-2-12PR
1610-2-12PR
1610-2-16PR
8-6K FBZ
8-8K FBZ
12-12K FBZ
16-16K FBZ
2-2R FBZ
2-4R FBZ
4-2R FBZ
4-4R FBZ
4-6R FBZ
4-8R FBZ
6-2R FBZ
6-4R FBZ
6-6R FBZ
6-8R FBZ
8-4R FBZ
8-6R FBZ
8-8R FBZ
12-8R FBZ
12-12R FBZ
16-8R FBZ
16-12R FBZ
16-16R FBZ
4-2R C5BZ
4-4R C5BZ
6-4R C5BZ
6-6R C5BZ
8-4R C5BZ
8-6R C5BZ
8-8R C5BZ
10-8R C5BZ
12-8R C5BZ
12-12R C5BZ
16-12R C5BZ
16-16R C5BZ
8MSC6K
8MSC8K
12MSC12K
16MSC16K
2MSC2R
2MSC4R
4MSC2R
4MSC4R
4MSC6R
4MSC8R
6MSC2R
6MSC4R
6MSC6R
6MSC8R
8MSC4R
8MSC6R
8MSC8R
12MSC8R
12MSC12R
16MSC8R
16MSC12R
16MSC16R
4MSEL2R
4MSEL4R
6MSEL4R
6MSEL6R
8MSEL4R
8MSEL6R
8MSEL8R
10MSEL8R
12MSEL8R
12MSEL12R
16MSEL12R
16MSEL16R
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
N/A#
MS-IG-400
MS-IG-500
MS-IG-300
MS-IG-810
MS-IG-1010
MS-IG-1210
MS-IG-1610
N/A#
N/A#
MS-ST-400
MS-ST-600
MS-ST-810
MS-ST-1010
MS-ST-1210
MS-ST-1410
MS-ST-1610
PRE-SET TOOLS
NPST-04
NPST-06
NPST-08
NPST-10
NPST-12
NPST-14
NPST-16
B r e n n a n
I n d u s t r i e s
47
DISTRIBUTION CENTERS
www.brennaninc.com
California
Barrents Sea Circle
Lake Forest, California 92630-8807
Phone: 949.595.0901
Fax: 949.595.0933
Toll Free: 1.800.942.5321
Georgia
5369 Penn Circle
Decatur, Georgia 30035
Phone: 770.981.8451
Fax: 770.987.0926
Toll Free: 1.800.458.1988
Ohio
30205 Solon Road
Solon, Ohio 44139
Phone: 440.248.7088
Fax: 440.248.9375
Toll Free: 1.800.331.1523
Corporate
Headquarters
6701 Cochran Road
Solon, Ohio 44139 U.S.A.
Phone: 440.248.1880
Toll Free: 888.331.1523
Fax: 440.248.7282
Instrumentation Fittings
Valves-Instrumentation
Hydraulic Flanges
Metric Bite Type Fittings
Brennan
Manufacturing Group
26420 Century
Corners Parkway
Cleveland, Ohio 44132-3310
Push-to-Connect Fittings
DOT
Clamps
Flareless Bite Type Fittings
Live Swivels
Texas
1189 108th Street
Grand Prairie, Texas 75050
Brass Fittings
Test Points
Phone: 972.988.8311
Fax: 972.660.6638
Toll Free: 1.800.443.9937
Conversion Adapters
Flare-O
Washington
1516 45th Street E.
Sumner, Washington 98390
Phone: 253.826.2001
Fax: 253.826.4884
Toll Free: 1.800.445.7107
Shanghai, China
No. 368, Rongchun Road
Langxia Town
Jinshan District
Shanghai 201516
Distributed By:
Phone: 86.21.57391155
Fax: 86.21.57390688
Ontario, Canada
3397 American Drive
Mississauga, Ontario
L4V 1T8
Phone: 800.331.1523