Tracker Pro Otm600 1.5
Tracker Pro Otm600 1.5
Manual
*Very Important:
The battery must be charged for 6-7
hours before using the meter for the first
time. Failure to do this will affect the
batteries life and performance.
*Your Latitude and Longitude will be
required for satellite meter setup. Please
go to the website below for your Latitude
and Longitude.
www.findlatitudeandlongitude.com
Battery:
Do not expose battery to High heat . Avoid excessive
physical shock or vibration. Do not disassemble
Satellite Meter or modify the battery or battery charger
in any way.
Do not leave battery in charger over 7 hours. Store
the battery in a cool, dry and well-ventilated area.
Promptly and properly dispose of used battery packs
according to local regulations for the disposal of
batteries. Damaged or leaking battery packs should
be handled with extreme care. Charge unused battery
packs at least once every six months.
Battery Charging:
Charge the battery packs only with the specified
charger. Never use a modified or damaged charger.
Do not charge battery packs near combustible or
conductive materials. Charge the battery packs in a
well-ventilated room that does not exceed room
temperatures of 40oC/104oF.
Cleaning and Maintenance:
Do not expose the meter and charger to any type of
liquid, moisture or humidity it is not waterproof.
Please clean the meter and charger periodically with
soft dry cloth. Do not use alcohol, thinner or benzene
solution to clean them.
Fig. 1
Fig. 3
Press [] [] to select Longitude. Type in users local longitudethen
press ENTER to save. Type the latitude in the same way.
Fig. 4
Press [] [] to select parameters which will be typed or changed, press
[] [] to select letters you want to change.
NAMESatellites name.(Create Name)
L Satellite Longitude
F Downstream Frequency
SRSymbol Rate
LOLocal Oscillation Frequency
[F1]Press [F1] to select 22KHz On/Off
[F2]F2 key DisEqC control will be OFF switch between LNB 1-4 and OFF
[F3]LNB Power Supply. Press to switch between 13V and18V.
[F4]Search Screen (Next Page) Ounce data is entered go to search
screen.
See Fig 4
Fig 4
When a satellite longitude is entered, the meter will adjust according to the users
local coordinates. If the satellite can be seen, the picture will show the Azimuth,
Elevation and Polarization box. (A: E: P: Box).
As shown inFig. 5
Fig. 5
A: Azimuth
E: Elevation
P: Polarization means a C or Ku radio frequency is 00, The LNB turns clockwise
or counter clockwise. A positive number is clockwise, negative is counter
clockwise, also known as LNB skew.
If the satellite cannot be seen from the users location, the meter shows below
the horizon as seen in Fig. 6.
Fig. 6
Fig 7
Fig. 9
icon then
Fig. 10
Fig. 11
Press [] [] to move the arrow up and down. Keep pressed for fast
scrolling. Press [] [] to page up or page down, displays ten lines per
screen. The location number is shown on the upper right. Select a satellite
and press ENTER to enter the search screen.
Fig. 12
Channel Lists are divided into Europe, Atlantic, America and Asia Files. Select a
region and press ENTER , as shown in Fig. 13. Select a satellite and begin
searching for satellite signal.
Fig. 13
If the satellite cannot be seen from users location, the meter will display below
the horizon.
(4.0) Settings
Move direction key to Setup icon [
Fig. 14
User can select items by pressing [] [] keys. Press [] []
keys to modify contents press ENTER to save.
(4.1) Date and Time Setting
Press [] [] to select letters, press number key to modify then
press ENTER to save.
(4.2) Delete CUSTOM Catalogs
After pressing ENTER key, the screen will ask Are you sure you
want to delete? as shown inFig.15
Press ESC to exit.
Fig. 15
Fig. 16
(5.0) Satellite Records:
On home screen press direction key and select [
press ENTER to enteras shown in Fig. 17
Fig: 17
] icon
Fig: 18
Fig. 21
(5.3) Using of CUSTOM channel List
For convenient using, the company adds a CUSTOM channel list.
It can save 200 satellite messages, which are all user-defined.
(5.4) Setting up CUSTOM channel list
User can type in satellite parameter in manual seeking item or
pick out parameter in local and all channel list. Press CUSTOM
key for 3 seconds, the channel will be saved in CUSTOM channel
catalog and be ranked one by one. You will see item number on
screen. As shown in Fig. 22
Fig. 22
Fig. 23
(5.6) Saving and modifying parameters
Select the channel, which will be modified, and press ENTER to
enter, as shown in Fig. 24.
Fig. 24
When the parameter has been modified, press C/S key to select
save or save as. Press ENTER to confirm, as shown in Fig. 25.
Save is to save parameter at original position. Save as is to
save to another position and display location number. ESC is to
exit, as shown in Fig. 26.
Fig. 25
Fig. 26
(5.7) Deleting CUSTOM channels:
Selecting a channel in channel list, press C/S key for 3 seconds to
delete.
Owners Manual
AC Home Charger
DC car charger
Data Cable
F Connectors