Professional Documents
Culture Documents
Day 2 Chemical Engineering MCQs
Day 2 Chemical Engineering MCQs
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
b. Silica gel
c. Chabazite
d. Activated carbon
Rate of physical adsorption increases with
a. Increase in temperature
b. Decrease in pressure
c. Decrease in temperature
d. Decrease in surface area
Which of the following is not correct for physical
adsorption?
a. Adsorption on solid is reversible
b. Adsorption is spontaneous
c. Adsorption increases in temperature
d. Both enthalpy and entropy of adsorption
are negative
The substance which is adsorbed on the surface
a. Absorbent
b. Absorbate
c. Adsorbent
d. Adsorbate
The small multiblade ones in the radial-flow
impellers are called
a. Propeller
b. Paddles
c. Turbines
d. Stirrer
The adsorbent used in the purification of
hydrocarbon products
a. Alumina
b. Bone char
c. Fullers earth
d. Silica gel
The term applied to all ways in which particles of
solids are cut or broken into smaller pieces
a. Size reduction
b. Screening
c. Comminution
d. Crushing
The hardness of a mineral is criterion of its
resistance to crushing. Which of the following is an
example of a hard material
a. Talc
b. Calcite
c. Sapphire
d. Feldspar
States that the energy required for crushing is
proportional to the new surface created
a. Rittingers law
b. Kicks law
c. Bond law
d. Energy law
When strong vertical currents in the mixing tank is
desired, it is best to use
a. Anchor agitator
b. Propellers
c. Pitched blade turbine
d. Vertical blade turbine
The velocity components induced by the rotation
of the impeller in a mixing process tends to induce
the formation of vortex and swirling. These
velocity components are
a. Vertical
b. Normal to rotation
c. Tangential and radial
d. Longitudinal
The drag coefficient in hindered settling is ___
compared to free settling
a. Greater than
b.
c.
d.
Less than
Constant
Varying