Cs2032 Data Warehousing and Data Mining Notes (Unit III) .PDF - Www.chennaiuniversity - Net.notes
Cs2032 Data Warehousing and Data Mining Notes (Unit III) .PDF - Www.chennaiuniversity - Net.notes
www.chennaiuniversity.net
CS2032 - Data Warehousing and Data Mining
Important topics from UNIT 3
Data mining: on what kind of data? / Describe the following advanced database systems and
applications: object-relational databases, spatial databases, text databases, multimedia
databases, the World Wide Web.
Data cleaning
Data Transformation
Numerosity reduction techniques:
Measure the Central Tendency
Measure the Dispersion of Data
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
6. A graphical user interface that allows the user an interactive approach to the data mining
system.
How is a data warehouse different from a database? How are they similar?
Differences between a data warehouse and a database: A data warehouse is a repository of
information collected from multiple sources, over a history of time, stored under a unified schema, and
used for data analysis and decision support; whereas a database, is a collection of interrelated data that
represents the current status of the stored data. There could be multiple heterogeneous databases
where the schema of one database may not agree with the schema of another. A database system
supports ad-hoc query and on-line transaction processing. For more details, please refer to the section
Differences between operational database systems and data warehouses.
Similarities between a data warehouse and a database: Both are repositories of information, storing
huge amounts of persistent data.
Data mining: on what kind of data? / Describe the following advanced database systems and
applications: object-relational databases, spatial databases, text databases, multimedia databases,
the World Wide Web.
In principle, data mining should be applicable to any kind of information repository. This includes
relational databases, data warehouses, transactional databases, advanced database systems,
www.chennaiuniversity.net
www.chennaiuniversity.net
flat files, and the World-Wide Web. Advanced database systems include object-oriented and objectrelational databases, and special c application-oriented databases, such as spatial databases, time-series
databases, text databases, and multimedia databases.
Flat files: Flat files are actually the most common data source for data mining algorithms, especially at
the research level. Flat files are simple data files in text or binary format with a structure known by the
data mining algorithm to be applied. The data in these files can be transactions, time-series data,
scientific measurements, etc.
Relational Databases: a relational database consists of a set of tables containing either values of entity
attributes, or values of attributes from entity relationships. Tables have columns and rows, where
columns represent attributes and rows represent tuples. A tuple in a relational table corresponds to
either an object or a relationship between objects and is identified by a set of attribute values
representing a unique key. In following figure it presents some relations Customer, Items, and Borrow
representing business activity in a video store. These relations are just a subset of what could be a
database for the video store and is given as an example.
The most commonly used query language for relational database is SQL, which allows retrieval and
manipulation of the data stored in the tables, as well as the calculation of aggregate functions such as
average, sum, min, max and count. For instance, an SQL query to select the videos grouped by category
would be:
SELECT count(*) FROM Items WHERE type=video GROUP BY category.
Data mining algorithms using relational databases can be more versatile than data mining algorithms
specifically written for flat files, since they can take advantage of the structure inherent to relational
www.chennaiuniversity.net
www.chennaiuniversity.net
databases. While data mining can benefit from SQL for data selection, transformation and consolidation,
it goes beyond what SQL could provide, such as predicting, comparing, detecting deviations, etc.
Data warehouses
A data warehouse is a repository of information collected from multiple sources, stored under a unified
schema, and which usually resides at a single site. Data warehouses are constructed via a process of
data cleansing, data transformation, data integration, data loading, and periodic data refreshing. The
figure shows the basic architecture of a data warehouse
In order to facilitate decision making, the data in a data warehouse are organized around major
subjects, such as customer, item, supplier, and activity. The data are stored to provide information from
a historical perspective and are typically summarized.
A data warehouse is usually modeled by a multidimensional database structure, where each dimension
corresponds to an attribute or a set of attributes in the schema, and each cell stores the value of some
aggregate measure, such as count or sales amount. The actual physical structure of a data warehouse
may be a relational data store or a multidimensional data cube. It provides a multidimensional view of
data and allows the precomputation and fast accessing of summarized data.
www.chennaiuniversity.net
www.chennaiuniversity.net
The data cube structure that stores the primitive or lowest level of information is called a base cuboid.
Its corresponding higher level multidimensional (cube) structures are called (non-base) cuboids. A base
cuboid together with all of its corresponding higher level cuboids form a data cube. By providing
multidimensional data views and the precomputation of summarized data, data warehouse systems are
well suited for On-Line Analytical Processing, or OLAP. OLAP operations make use of background
knowledge regarding the domain of the data being studied in order to allow the presentation of data at
different levels of abstraction. Such operations accommodate different user viewpoints. Examples of
OLAP operations include drill-down and roll-up, which allow the user to view the data at differing
degrees of summarization, as illustrated in above figure.
Transactional databases
In general, a transactional database consists of a flat file where each record represents a transaction. A
transaction typically includes a unique transaction identity number (trans ID), and a list of the items
making up the transaction (such as items purchased in a store) as shown below:
www.chennaiuniversity.net
www.chennaiuniversity.net
of messages that the object can use to communicate with other objects or with the rest of the database
system and a set of methods where each method holds the code to implement a message.
A spatial database contains spatial-related data, which may be represented in the form of raster or
vector data. Raster data consists of n-dimensional bit maps or pixel maps, and vector data are
represented by lines, points, polygons or other kinds of processed primitives, Some examples of spatial
databases include geographical (map) databases, VLSI chip designs, and medical and satellite images
databases.
Time-Series Databases: Time-series databases contain time related data such stock market data or
logged activities. These databases usually have a continuous flow of new data coming in, which
sometimes causes the need for a challenging real time analysis. Data mining in such databases
commonly includes the study of trends and correlations between evolutions of different variables, as
well as the prediction of trends and movements of the variables in time.
A text database is a database that contains text documents or other word descriptions in the form of
long sentences or paragraphs, such as product specifications, error or bug reports, warning messages,
summary reports, notes, or other documents.
A multimedia database stores images, audio, and video data, and is used in applications such as
picture content-based retrieval, voice-mail systems, video-on-demand systems, the World Wide Web,
and speech-based user interfaces.
The World-Wide Web provides rich, world-wide, on-line information services, where data objects are
linked together to facilitate interactive access. Some examples of distributed information services
associated with the World-Wide Web include America Online, Yahoo!, AltaVista, and Prodigy.
Data mining functionalities/Data mining tasks: what kinds of patterns can be mined?
Data mining functionalities are used to specify the kind of patterns to be found in data mining tasks. In
general, data mining tasks can be classified into two categories:
Descriptive
predictive
Descriptive mining tasks characterize the general properties of the data in the database. Predictive
mining tasks perform inference on the current data in order to make predictions.
www.chennaiuniversity.net
www.chennaiuniversity.net
Describe data mining functionalities, and the kinds of patterns they can discover
(or)
Define each of the following data mining functionalities: characterization, discrimination, association
and correlation analysis, classification, prediction, clustering, and evolution analysis. Give examples of
each data mining functionality, using a real-life database that you are familiar with.
www.chennaiuniversity.net
www.chennaiuniversity.net
Data Discrimination is a comparison of the general features of target class data objects with the general
features of objects from one or a set of contrasting classes.
Example
The general features of students with high GPAs may be compared with the general features of
students with low GPAs. The resulting description could be a general comparative profile of the
students such as 75% of the students with high GPAs are fourth-year computing science students while
65% of the students with low GPAs are not.
The output of data characterization can be presented in various forms. Examples include pie charts, bar
charts, curves, multidimensional data cubes, and multidimensional tables, including crosstabs. The
resulting descriptions can also be presented as generalized relations, or in rule form called characteristic
rules.
Discrimination descriptions expressed in rule form are referred to as discriminant rules.
2 Association
It is the discovery of association rules showing attribute-value conditions that occur frequently together
in a given set of data. For example, a data mining system may find association rules like
major(X, computing science) owns(X, personal computer)
[support = 12%, confidence = 98%]
where X is a variable representing a student. The rule indicates that of the students under study, 12%
(support) major in computing science and own a personal computer. There is a 98% probability
(confidence, or certainty) that a student in this group owns a personal computer.
Example:
A grocery store retailer to decide whether to but bread on sale. To help determine the impact of this
decision, the retailer generates association rules that show what other products are frequently
purchased with bread. He finds 60% of the times that bread is sold so are pretzels and that 70% of the
time jelly is also sold. Based on these facts, he tries to capitalize on the association between bread,
pretzels, and jelly by placing some pretzels and jelly at the end of the aisle where the bread is placed. In
addition, he decides not to place either of these items on sale at the same time.
3 Classification and prediction
Classification:
Classification:
www.chennaiuniversity.net
www.chennaiuniversity.net
It classifies data (constructs a model) based on the training set and the values (class labels) in a
classifying attribute and uses it in classifying new data
Typical Applications
o credit approval
o target marketing
o medical diagnosis
o treatment effectiveness analysis
Classification can be defined as the process of finding a model (or function) that describes and
distinguishes data classes or concepts, for the purpose of being able to use the model to predict the
class of objects whose class label is unknown. The derived model is based on the analysis of a set of
training data (i.e., data objects whose class label is known).
Example:
An airport security screening station is used to deter mine if passengers are potential terrorist or
criminals. To do this, the face of each passenger is scanned and its basic pattern(distance between eyes,
size, and shape of mouth, head etc) is identified. This pattern is compared to entries in a database to see
if it matches any patterns that are associated with known offenders
A classification model can be represented in various forms, such as
1) IF-THEN rules,
student ( class , "undergraduate") AND concentration ( level, "high") ==> class A
student (class ,"undergraduate") AND concentrtion (level,"low") ==> class B
student (class , "post graduate") ==> class C
2) Decision tree
3) Neural network.
www.chennaiuniversity.net
www.chennaiuniversity.net
Prediction:
Find some missing or unavailable data values rather than class labels referred to as prediction. Although
prediction may refer to both data value prediction and class label prediction, it is usually confined to
data value prediction and thus is distinct from classification. Prediction also encompasses the
identification of distribution trends based on the available data.
Example:
Predicting flooding is difficult problem. One approach is uses monitors placed at various points in the
river. These monitors collect data relevant to flood prediction: water level, rain amount, time, humidity
etc. These water levels at a potential flooding point in the river can be predicted based on the data
collected by the sensors upriver from this point. The prediction must be made with respect to the time
the data were collected.
Classification vs. Prediction
Classification differs from prediction in that the former is to construct a set of models (or functions) that
describe and distinguish data class or concepts, whereas the latter is to predict some missing or
unavailable, and often numerical, data values. Their similarity is that they are both tools for prediction:
Classification is used for predicting the class label of data objects and prediction is typically used for
predicting missing numerical data values.
4 Clustering analysis
Clustering analyzes data objects without consulting a known class label.
The objects are clustered or grouped based on the principle of maximizing the intraclass similarity and
minimizing the interclass similarity.
Each cluster that is formed can be viewed as a class of objects.
Clustering can also facilitate taxonomy formation, that is, the organization of observations into a
hierarchy of classes that group similar events together as shown below:
www.chennaiuniversity.net
www.chennaiuniversity.net
Example:
A certain national department store chain creates special catalogs targeted to various demographic
groups based on attributes such as income, location and physical characteristics of potential customers
(age, height, weight, etc). To determine the target mailings of the various catalogs and to assist in the
creation of new, more specific catalogs, the company performs a clustering of potential customers
based on the determined attribute values. The results of the clustering exercise are the used by
management to create special catalogs and distribute them to the correct target population based on
the cluster for that catalog.
Classification vs. Clustering
In general, in classification you have a set of predefined classes and want to know which class a
new object belongs to.
Clustering tries to group a set of objects and find whether there is some relationship between
the objects.
In the context of machine learning, classification is supervised learning and clustering is
unsupervised learning.
5 Outlier analysis: A database may contain data objects that do not comply with general model of data.
These data objects are outliers. In other words, the data objects which do not fall within the cluster will
be called as outlier data objects. Noisy data or exceptional data are also called as outlier data. The
analysis of outlier data is referred to as outlier mining.
Example
Outlier analysis may uncover fraudulent usage of credit cards by detecting purchases of extremely large
amounts for a given account number in comparison to regular charges incurred by the same account.
Outlier values may also be detected with respect to the location and type of purchase, or the purchase
frequency.
www.chennaiuniversity.net
www.chennaiuniversity.net
6 Data evolution analysis describes and models regularities or trends for objects whose behavior
changes over time.
Example:
The data of result the last several years of a college would give an idea if quality of graduated produced
by it
7 Correlation analysis
Correlation analysis is a technique use to measure the association between two variables. A correlation
coefficient (r) is a statistic used for measuring the strength of a supposed linear association between
two variables. Correlations range from -1.0 to +1.0 in value.
A correlation coefficient of 1.0 indicates a perfect positive relationship in which high values of one
variable are related perfectly to high values in the other variable, and conversely, low values on one
variable are perfectly related to low values on the other variable.
A correlation coefficient of 0.0 indicates no relationship between the two variables. That is, one cannot
use the scores on one variable to tell anything about the scores on the second variable.
A correlation coefficient of -1.0 indicates a perfect negative relationship in which high values of one
variable are related perfectly to low values in the other variables, and conversely, low values in one
variable are perfectly related to high values on the other variable.
What is the difference between discrimination and classification? Between characterization and
clustering? Between classification and prediction? For each of these pairs of tasks, how are they
similar?
Answer:
Discrimination differs from classification in that the former refers to a comparison of the general
features of target class data objects with the general features of objects from one or a set of contrasting
classes, while the latter is the process of finding a set of models (or functions) that describe and
distinguish data classes or concepts for the purpose of being able to use the model to predict the class
of objects whose class label is unknown. Discrimination and classification are similar in that they both
deal with the analysis of class data objects.
Characterization differs from clustering in that the former refers to a summarization of the general
characteristics or features of a target class of data while the latter deals with the analysis of data objects
without consulting a known class label. This pair of tasks is similar in that they both deal with grouping
together objects or data that are related or have high similarity in comparison to one another.
Classification differs from prediction in that the former is the process of finding a set of models (or
functions) that describe and distinguish data class or concepts while the latter predicts missing or
unavailable, and often numerical, data values. This pair of tasks is similar in that they both are tools for
Prediction: Classification is used for predicting the class label of data objects and prediction is typically
used for predicting missing numerical data values.
www.chennaiuniversity.net
www.chennaiuniversity.net
Are all of the patterns interesting? / What makes a pattern interesting?
A pattern is interesting if,
(1) It is easily understood by humans,
(2) Valid on new or test data with some degree of certainty,
(3) Potentially useful, and
(4) Novel.
A pattern is also interesting if it validates a hypothesis that the user sought to confirm. An interesting
pattern represents knowledge.
www.chennaiuniversity.net
www.chennaiuniversity.net
oriented or data warehouse-oriented, etc. The classification can also take into account the degree of
user interaction involved in the data mining process such as query-driven systems, interactive
exploratory systems, or autonomous systems. A comprehensive system would provide a wide variety of
data mining techniques to fit different situations and options, and offer different degrees of user
interaction.
Five primitives for specifying a data mining task
Task-relevant data: This primitive specifies the data upon which mining is to be performed. It involves
specifying the database and tables or data warehouse containing the relevant data, conditions for
selecting the relevant data, the relevant attributes or dimensions for exploration, and instructions
regarding the ordering or grouping of the data retrieved.
Knowledge type to be mined: This primitive specifies the specific data mining function to be
performed, such as characterization, discrimination, association, classification, clustering, or evolution
analysis. As well, the user can be more specific and provide pattern templates that all discovered
patterns must match. These templates or meta patterns (also called meta rules or meta queries), can be
used to guide the discovery process.
Background knowledge: This primitive allows users to specify knowledge they have about the domain
to be mined. Such knowledge can be used to guide the knowledge discovery process and evaluate the
patterns that are found. Of the several kinds of background knowledge, this chapter focuses on concept
hierarchies.
Pattern interestingness measure: This primitive allows users to specify functions that are used to
separate uninteresting patterns from knowledge and may be used to guide the mining process, as well
as to evaluate the discovered patterns. This allows the user to confine the number of uninteresting
patterns returned by the process, as a data mining process may generate a large number of patterns.
Interestingness measures can be specified for such pattern characteristics as simplicity, certainty, utility
and novelty.
Visualization of discovered patterns: This primitive refers to the form in which discovered patterns
are to be displayed. In order for data mining to be effective in conveying knowledge to users, data
mining systems should be able to display the discovered patterns in multiple forms such as rules, tables,
cross tabs (cross-tabulations), pie or bar charts, decision trees, cubes or other visual representations.
Major issues in data mining
Major issues in data mining is regarding mining methodology, user interaction, performance, and
diverse data types
1 Mining methodology and user-interaction issues:
_ Mining different kinds of knowledge in databases: Since different users can be interested in different
kinds of knowledge, data mining should cover a wide spectrum of data analysis and knowledge
www.chennaiuniversity.net
www.chennaiuniversity.net
discovery tasks, including data characterization, discrimination, association, classification, clustering,
trend and deviation analysis, and similarity analysis. These tasks may use the same database in different
ways and require the development of numerous data mining techniques.
_ Interactive mining of knowledge at multiple levels of abstraction: Since it is difficult to know exactly
what can be discovered within a database, the data mining process should be interactive.
_ Incorporation of background knowledge: Background knowledge, or information regarding the
domain under study, may be used to guide the discovery patterns. Domain knowledge related to
databases, such as integrity constraints and deduction rules, can help focus and speed up a data mining
process, or judge the interestingness of discovered patterns.
_ Data mining query languages and ad-hoc data mining: Knowledge in Relational query languages (such
as SQL) required since it allow users to pose ad-hoc queries for data retrieval.
_ Presentation and visualization of data mining results: Discovered knowledge should be expressed in
high-level languages, visual representations, so that the knowledge can be easily understood and
directly usable by humans
_ Handling outlier or incomplete data: The data stored in a database may reflect outliers: noise,
exceptional cases, or incomplete data objects. These objects may confuse the analysis process, causing
over fitting of the data to the knowledge model constructed. As a result, the accuracy of the discovered
patterns can be poor. Data cleaning methods and data analysis methods which can handle outliers are
required.
_ Pattern evaluation: refers to interestingness of pattern: A data mining system can uncover thousands
of patterns. Many of the patterns discovered may be uninteresting to the given user, representing
common knowledge or lacking novelty. Several challenges remain regarding the development of
techniques to assess the interestingness of discovered patterns,
2. Performance issues. These include efficiency, scalability, and parallelization of data mining
algorithms.
_ Efficiency and scalability of data mining algorithms: To effectively extract information from a huge
amount of data in databases, data mining algorithms must be efficient and scalable.
_ Parallel, distributed, and incremental updating algorithms: Such algorithms divide the data into
partitions, which are processed in parallel. The results from the partitions are then merged.
3. Issues relating to the diversity of database types
_ Handling of relational and complex types of data: Since relational databases and data warehouses are
widely used, the development of efficient and effective data mining systems for such data is important.
_ Mining information from heterogeneous databases and global information systems: Local and widearea computer networks (such as the Internet) connect many sources of data, forming huge, distributed,
www.chennaiuniversity.net
www.chennaiuniversity.net
and heterogeneous databases. The discovery of knowledge from different sources of structured, semistructured, or unstructured data with diverse data semantics poses great challenges to data mining.
Data preprocessing
Data preprocessing describes any type of processing performed on raw data to prepare it for another
processing procedure. Commonly used as a preliminary data mining practice, data preprocessing
transforms the data into a format that will be more easily and effectively processed for the purpose of
the user.
Data preprocessing describes any type of processing performed on raw data to prepare it for another
processing procedure. Commonly used as a preliminary data mining practice, data preprocessing
transforms the data into a format that will be more easily and effectively processed for the purpose of
the user
Why Data Preprocessing?
Data in the real world is dirty. It can be in incomplete, noisy and inconsistent from. These data needs to
be preprocessed in order to help improve the quality of the data, and quality of the mining results.
If no quality data, then no quality mining results. The quality decision is always based on the quality
data.
If there is much irrelevant and redundant information present or noisy and unreliable data, then
knowledge discovery during the training phase is more difficult
Incomplete data: lacking attribute values, lacking certain attributes of interest, or containing only
aggregate data. e.g., occupation= .
Noisy data: containing errors or outliers data. e.g., Salary=-10
Inconsistent data: containing discrepancies in codes or names. e.g., Age=42 Birthday=03/07/1997
Incomplete data may come from
Not applicable data value when collected
Different considerations between the time when the data was collected and when it is analyzed.
Human/hardware/software problems
Noisy data (incorrect values) may come from
Faulty data collection by instruments
Human or computer error at data entry
Errors in data transmission
Inconsistent data may come from
Different data sources
Functional dependency violation (e.g., modify some linked data)
Major Tasks in Data Preprocessing
www.chennaiuniversity.net
www.chennaiuniversity.net
Data cleaning
Fill in missing values, smooth noisy data, identify or remove outliers, and resolve inconsistencies
Data integration
Integration of multiple databases, data cubes, or files
Data transformation
Normalization and aggregation
Data reduction
Obtains reduced representation in volume but produces the same or similar analytical results
Data discretization
Part of data reduction but with particular importance, especially for numerical data
Forms of Data Preprocessing
Data cleaning:
Data cleaning routines attempt to fill in missing values, smooth out noise while identifying outliers, and
correct inconsistencies in the data.
Various methods for handling this problem:
www.chennaiuniversity.net
www.chennaiuniversity.net
The various methods for handling the problem of missing values in data tuples include:
(a) Ignoring the tuple: This is usually done when the class label is missing (assuming the mining task
involves classification or description). This method is not very effective unless the tuple contains several
attributes with missing values. It is especially poor when the percentage of missing values per attribute
varies considerably.
(b) Manually filling in the missing value: In general, this approach is time-consuming and may not be a
reasonable task for large data sets with many missing values, especially when the value to be filled in is
not easily determined.
(c) Using a global constant to fill in the missing value: Replace all missing attribute values by the same
constant, such as a label like Unknown, or . If missing values are replaced by, say, Unknown, then
the mining program may mistakenly think that they form an interesting concept, since they all have a
value in common that of Unknown. Hence, although this method is simple, it is not recommended.
(d) Using the attribute mean for quantitative (numeric) values or attribute mode for categorical
(nominal) values, for all samples belonging to the same class as the given tuple: For example, if
classifying customers according to credit risk, replace the missing value with the average income value
for customers in the same credit risk category as that of the given tuple.
(e) Using the most probable value to fill in the missing value: This may be determined with regression,
inference-based tools using Bayesian formalism, or decision tree induction. For example, using the other
customer attributes in your data set, you may construct a decision tree to predict the missing values for
income.
Noisy data:
Noise is a random error or variance in a measured variable. Data smoothing tech is used for removing
such noisy data.
www.chennaiuniversity.net
www.chennaiuniversity.net
b.
c.
Smoothing by bin medians: Each value in the bin is replaced by the bin median.
Smoothing by boundaries: The min and max values of a bin are identified as the bin
boundaries. Each bin value is replaced by the closest boundary value.
Example: Binning Methods for Data Smoothing
o
o
Sorted data for price (in dollars): 4, 8, 9, 15, 21, 21, 24, 25, 26, 28, 29, 34
Partition into (equi-depth) bins(equi depth of 3 since each bin contains three values):
- Bin 1: 4, 8, 9, 15
- Bin 2: 21, 21, 24, 25
- Bin 3: 26, 28, 29, 34
In smoothing by bin means, each value in a bin is replaced by the mean value of the bin. For example,
the mean of the values 4, 8, and 15 in Bin 1 is 9. Therefore, each original value in this bin is replaced by
the value 9. Similarly, smoothing by bin medians can be employed, in which each bin value is replaced
by the bin median. In smoothing by bin boundaries, the minimum and maximum values in a given bin
are identified as the bin boundaries. Each bin value is then replaced by the closest boundary value.
Suppose that the data for analysis include the attribute age. The age values for the data tuples are (in
increasing order): 13, 15, 16, 16, 19, 20, 20, 21, 22, 22, 25, 25, 25, 25, 30, 33, 33, 35, 35, 35, 35, 36, 40,
45, 46, 52, 70.
(a) Use smoothing by bin means to smooth the above data, using a bin depth of 3. Illustrate your steps.
Comment on the effect of this technique for the given data.
The following steps are required to smooth the above data using smoothing by bin means with a bin
depth of 3.
Step 1: Sort the data. (This step is not required here as the data are already sorted.)
Step 2: Partition the data into equidepth bins of depth 3.
Bin 1: 13, 15, 16 Bin 2: 16, 19, 20 Bin 3: 20, 21, 22
Bin 4: 22, 25, 25 Bin 5: 25, 25, 30 Bin 6: 33, 33, 35
www.chennaiuniversity.net
www.chennaiuniversity.net
Bin 7: 35, 35, 35 Bin 8: 36, 40, 45 Bin 9: 46, 52, 70
Step 3: Calculate the arithmetic mean of each bin.
Step 4: Replace each of the values in each bin by the arithmetic mean calculated for the bin.
Bin 1: 14, 14, 14 Bin 2: 18, 18, 18 Bin 3: 21, 21, 21
Bin 4: 24, 24, 24 Bin 5: 26, 26, 26 Bin 6: 33, 33, 33
Bin 7: 35, 35, 35 Bin 8: 40, 40, 40 Bin 9: 56, 56, 56
2 Clustering: Outliers in the data may be detected by clustering, where similar values are organized into
groups, or clusters. Values that fall outside of the set of clusters may be considered outliers.
Linear regression involves finding the best of line to fit two variables, so that one
variable can be used to predict the other.
Multiple linear regression is an extension of linear regression, where more than two
variables are involved and the data are fit to a multidimensional surface.
Using regression to find a mathematical equation to fit the data helps smooth out the noise.
Field overloading: is a kind of source of errors that typically occurs when developers compress new
attribute definitions into unused portions of already defined attributes.
Unique rule is a rule says that each value of the given attribute must be different from all other values
of that attribute
www.chennaiuniversity.net
www.chennaiuniversity.net
Consecutive rule is a rule says that there can be no missing values between the lowest and highest
values of the attribute and that all values must also be unique.
Null rule specifies the use of blanks, question marks, special characters or other strings that may
indicate the null condition and how such values should be handled.
Data Integration
It combines data from multiple sources into a coherent store. There are number of issues to consider
during data integration.
Issues:
The result of the equation is > 0, then A and B are positively correlated, which means the value
of A increases as the values of B increases. The higher value may indicate redundancy that may
be removed.
The result of the equation is = 0, then A and B are independent and there is no correlation
between them.
www.chennaiuniversity.net
www.chennaiuniversity.net
If the resulting value is < 0, then A and B are negatively correlated where the values of one
attribute increase as the value of one attribute decrease which means each attribute may
discourages each other.
-also called Pearsons product moment coefficient
Example:
Data Transformation
Data transformation can involve the following:
www.chennaiuniversity.net
www.chennaiuniversity.net
Normalization: where the attribute data are scaled so as to fall within a small specified range,
such as 1.0 to 1.0, or 0.0 to 1.0.
Attribute construction (feature construction): this is where new attributes are constructed and
added from the given set of attributes to help the mining process.
Normalization
In which data are scaled to fall within a small, specified range, useful for classification algorithms
involving neural networks, distance measurements such as nearest neighbor classification and
clustering. There are 3 methods for data normalization. They are:
min-max normalization
z-score normalization
normalization by decimal scaling
Min-max normalization: performs linear transformation on the original data values. It can be defined as,
v'
v minA
(new _ maxA new _ minA) new _ minA
maxA minA
v'
v meanA
stand _ devA
This method is useful when min and max value of attribute A are unknown or when outliers that are
dominate min-max normalization.
Normalization by decimal scaling: normalizes by moving the decimal point of values of attribute A. The
number of decimal points moved depends on the maximum absolute value of A. A value v of A is
normalized to v by computing,
www.chennaiuniversity.net
www.chennaiuniversity.net
These techniques can be applied to obtain a reduced representation of the data set that is much smaller
in volume, yet closely maintains the integrity of the original data. Data reduction includes,
1. Data cube aggregation, where aggregation operations are applied to the data in the
construction of a data cube.
2. Attribute subset selection, where irrelevant, weakly relevant or redundant attributes or
dimensions may be detected and removed.
3. Dimensionality reduction, where encoding mechanisms are used to reduce the data set size.
Examples: Wavelet Transforms Principal Components Analysis
4. Numerosity reduction, where the data are replaced or estimated by alternative, smaller data
representations such as parametric models (which need store only the model parameters
instead of the actual data) or nonparametric methods such as clustering, sampling, and the use
of histograms.
5. Discretization and concept hierarchy generation, where raw data values for attributes are
replaced by ranges or higher conceptual levels. Data discretization is a form of numerosity
reduction that is very useful for the automatic generation of concept hierarchies.
Data cube aggregation: Reduce the data to the concept level needed in the analysis. Queries regarding
aggregated information should be answered using data cube when possible. Data cubes store
multidimensional aggregated information. The following figure shows a data cube for multidimensional
analysis of sales data with respect to annual sales per item type for each branch.
Each cells holds an aggregate data value, corresponding to the data point in multidimensional space.
Data cubes provide fast access to precomputed, summarized data, thereby benefiting on-line analytical
processing as well as data mining.
The cube created at the lowest level of abstraction is referred to as the base cuboid. A cube for the
highest level of abstraction is the apex cuboid. The lowest level of a data cube (base cuboid). Data cubes
created for varying levels of abstraction are sometimes referred to as cuboids, so that a data cube" may
instead refer to a lattice of cuboids. Each higher level of abstraction further reduces the resulting data
size.
www.chennaiuniversity.net
www.chennaiuniversity.net
The following database consists of sales per quarter for the years 1997-1999.
Suppose, the annalyser interested in the annual sales rather than sales per quarter, the above data can
be aggregated so that the resulting data summarizes the total sales per year instead of per quarter. The
resulting data in smaller in volume, without loss of information necessary for the analysis task
Dimensionality Reduction
It reduces the data set size by removing irrelevant attributes. This is a method of attribute subset
selection are applied. A heuristic method of attribute of sub set selection is explained here:
Attribute sub selection / Feature selection
Feature selection is a must for any data mining product. That is because, when you build a data mining
model, the dataset frequently contains more information than is needed to build the model. For
example, a dataset may contain 500 columns that describe characteristics of customers, but perhaps
only 50 of those columns are used to build a particular model. If you keep the unneeded columns while
building the model, more CPU and memory are required during the training process, and more storage
space is required for the completed model.
In which select a minimum set of features such that the probability distribution of different classes given
the values for those features is as close as possible to the original distribution given the values of all
features
Basic heuristic methods of attribute subset selection include the following techniques, some of which
are illustrated below:
1. Step-wise forward selection: The procedure starts with an empty set of attributes. The best of the
original attributes is determined and added to the set. At each subsequent iteration or step, the best of
the remaining original attributes is added to the set.
2. Step-wise backward elimination: The procedure starts with the full set of attributes. At each step, it
removes the worst attribute remaining in the set.
www.chennaiuniversity.net
www.chennaiuniversity.net
3. Combination forward selection and backward elimination: The step-wise forward selection and
backward elimination methods can be combined, where at each step one selects the best attribute and
removes the worst from among the remaining attributes.
4. Decision tree induction: Decision tree induction constructs a flow-chart-like structure where each
internal (non-leaf) node denotes a test on an attribute, each branch corresponds to an outcome of the
test, and each external (leaf) node denotes a class prediction. At each node, the algorithm chooses the
best" attribute to partition the data into individual classes. When decision tree induction is used for
attribute subset selection, a tree is constructed from the given data. All attributes that do not appear in
the tree are assumed to be irrelevant. The set of attributes appearing in the tree form the reduced
subset of attributes.
Wavelet transforms
Principal components analysis.
www.chennaiuniversity.net
www.chennaiuniversity.net
Wavelet compression is a form of data compression well suited for image compression. The discrete
wavelet transform (DWT) is a linear signal processing technique that, when applied to a data vector D,
transforms it to a numerically different vector, D0, of wavelet coefficients.
The general algorithm for a discrete wavelet transform is as follows.
1. The length, L, of the input data vector must be an integer power of two. This condition can be met by
padding the data vector with zeros, as necessary.
2. Each transform involves applying two functions:
data smoothing
calculating weighted difference
3. The two functions are applied to pairs of the input data, resulting in two sets of data of length L/2.
4. The two functions are recursively applied to the sets of data obtained in the previous loop, until the
resulting data sets obtained are of desired length.
5. A selection of values from the data sets obtained in the above iterations are designated the wavelet
coefficients of the transformed data.
If wavelet coefficients are larger than some user-specified threshold then it can be retained. The
remaining coefficients are set to 0.
Haar2 and Daubechie4 are two popular wavelet transforms.
www.chennaiuniversity.net
www.chennaiuniversity.net
The principal components (new set of axes) give important information about variance. Using the
strongest components one can reconstruct a good approximation of the original signal.
Numerosity Reduction
Data volume can be reduced by choosing alternative smaller forms of data. This tech. can be
Parametric method
Non parametric method
Parametric: Assume the data fits some model, then estimate model parameters, and store only the
parameters, instead of actual data.
Non parametric: In which histogram, clustering and sampling is used to store reduced form of data.
Numerosity reduction techniques:
1 Regression and log linear models:
Can be used to approximate the given data
In linear regression, the data are modeled to fit a straight line using
Y = + X, where , are coefficients
Multiple regression: Y = b0 + b1 X1 + b2 X2.
Many nonlinear functions can be transformed into the above.
Log-linear model: The multi-way table of joint probabilities is approximated by a product of
lower-order tables.
Probability: p(a, b, c, d) = ab acad bcd
2 Histogram
Divide data into buckets and store average (sum) for each bucket
A bucket represents an attribute-value/frequency pair
It can be constructed optimally in one dimension using dynamic programming
It divides up the range of possible values in a data set into classes or groups. For each group, a
rectangle (bucket) is constructed with a base length equal to the range of values in that specific
group, and an area proportional to the number of observations falling into that group.
The buckets are displayed in a horizontal axis while height of a bucket represents the average
frequency of the values.
www.chennaiuniversity.net
www.chennaiuniversity.net
Example:
The following data are a list of prices of commonly sold items. The numbers have been sorted.
1, 1, 5, 5, 5, 5, 5, 8, 8, 10, 10, 10, 10, 12, 14, 14, 14, 15, 15, 15, 15, 15, 15, 18, 18, 18, 18, 18, 18, 18, 18,
20, 20, 20, 20, 20, 20, 20, 21, 21, 21, 21, 25, 25, 25, 25, 25, 28, 28, 30, 30, 30.
Draw histogram plot for price where each bucket should have equi width of 10
The buckets can be determined based on the following partitioning rules, including the following.
1.
2.
3.
4.
V-Optimal and MaxDiff histograms tend to be the most accurate and practical. Histograms are highly
effective at approximating both sparse and dense data, as well as highly skewed, and uniform data.
Clustering techniques consider data tuples as objects. They partition the objects into groups or clusters,
so that objects within a cluster are similar" to one another and dissimilar" to objects in other clusters.
Similarity is commonly defined in terms of how close" the objects are in space, based on a distance
function.
www.chennaiuniversity.net
www.chennaiuniversity.net
Quality of clusters measured by their diameter (max distance between any two objects in the cluster) or
centroid distance (avg. distance of each cluster object from its centroid)
Sampling
Sampling can be used as a data reduction technique since it allows a large data set to be represented by
a much smaller random sample (or subset) of the data. Suppose that a large data set, D, contains N
tuples. Let's have a look at some possible samples for D.
www.chennaiuniversity.net
www.chennaiuniversity.net
1. Simple random sample without replacement (SRSWOR) of size n: This is created by drawing n of the
N tuples from D (n < N), where the probably of drawing any tuple in D is 1=N, i.e., all tuples are qually
likely.
2. Simple random sample with replacement (SRSWR) of size n: This is similar to SRSWOR, except
that each time a tuple is drawn from D, it is recorded and then replaced. That is, after a tuple is drawn, it
is placed back in D so that it may be drawn again.
3. Cluster sample: If the tuples in D are grouped into M mutually disjoint clusters", then a SRS of m
clusters can be obtained, where m < M. For example, tuples in a database are usually retrieved a page at
a time, so that each page can be considered a cluster. A reduced data representation can be obtained by
applying, say, SRSWOR to the pages, resulting in a cluster sample of the tuples.
4. Stratified sample: If D is divided into mutually disjoint parts called strata", a stratified sample of D is
generated by obtaining a SRS at each stratum. This helps to ensure a representative sample, especially
when the data are skewed. For example, a stratified sample may be obtained from customer data,
where stratum is created for each customer age group. In this way, the age group having the smallest
number of customers will be sure to be represented.
Advantges of sampling
1. An advantage of sampling for data reduction is that the cost of obtaining a sample is
proportional to the size of the sample, n, as opposed to N, the data set size. Hence, sampling
complexity is potentially sub-linear to the size of the data.
2. When applied to data reduction, sampling is most commonly used to estimate the answer to an
aggregate query.
Discretization and concept hierarchies
Discretization:
Discretization techniques can be used to reduce the number of values for a given continuous attribute,
by dividing the range of the attribute into intervals. Interval labels can then be used to replace actual
data values.
Concept Hierarchy
A concept hierarchy for a given numeric attribute defines a discretization of the attribute. Concept
hierarchies can be used to reduce the data by collecting and replacing low level concepts (such as
numeric values for the attribute age) by higher level concepts (such as young, middle-aged, or senior).
Discretization and Concept hierarchy for numerical data:
Three types of attributes:
Nominal values from an unordered set, e.g., color, profession
Ordinal values from an ordered set, e.g., military or academic rank
Continuous real numbers, e.g., integer or real numbers
www.chennaiuniversity.net
www.chennaiuniversity.net
There are five methods for numeric concept hierarchy generation. These include:
1. binning,
2. histogram analysis,
3. clustering analysis,
4. entropy-based discretization, and
5. data segmentation by natural partitioning".
1 Bining: refer previous tpoic
2 Histogram: refer previous tpoic
3Clustering: refer previous tpoic
4 Entroby based discretization
An information-based measure called entropy" can be used to recursively partition the values of a
numeric attribute A, resulting in a hierarchical discretization.
Procedure:
www.chennaiuniversity.net
www.chennaiuniversity.net
Example:
Suppose that profits at different branches of a company for the year 1997 cover a wide range, from $351,976.00 to $4,700,896.50. A user wishes to have a concept hierarchy for profit automatically
generated
Suppose that the data within the 5%-tile and 95%-tile are between -$159,876 and $1,838,761. The
results of applying the 3-4-5 rule are shown in following figure
Step 1: Based on the above information, the minimum and maximum values are: MIN = -$351, 976.00,
and MAX = $4, 700, 896.50. The low (5%-tile) and high (95%-tile) values to be considered for the top or
first level of segmentation are: LOW = -$159, 876, and HIGH = $1, 838,761.
Step 2: Given LOW and HIGH, the most significant digit is at the million dollar digit position (i.e., msd =
1,000,000). Rounding LOW down to the million dollar digit, we get LOW = -$1; 000; 000; and rounding
HIGH up to the million dollar digit, we get HIGH = +$2; 000; 000.
Step 3: Since this interval ranges over 3 distinct values at the most significant digit, i.e., (2; 000; 000-(-1,
000; 000))/1, 000, 000 = 3, the segment is partitioned into 3 equi-width sub segments according to the
3-4-5 rule: (-$1,000,000 - $0], ($0 - $1,000,000], and ($1,000,000 - $2,000,000]. This represents the top
tier of the hierarchy.
Step 4: We now examine the MIN and MAX values to see how they fit" into the first level partitions.
Since the first interval, (-$1, 000, 000 - $0] covers the MIN value, i.e., LOW < MIN, we can adjust the left
boundary of this interval to make the interval smaller. The most significant digit of MIN is the hundred
thousand digit position. Rounding MIN down to this position, we get MIN0 = -$400, 000.
Therefore, the first interval is redefined as (-$400,000 - 0]. Since the last interval, ($1,000,000$2,000,000] does not cover the MAX value, i.e., MAX > HIGH, we need to create a new interval to cover
it. Rounding up MAX at its most significant digit position, the new interval is ($2,000,000 - $5,000,000].
www.chennaiuniversity.net
www.chennaiuniversity.net
Hence, the top most level of the hierarchy contains four partitions, (-$400,000 - $0], ($0 - $1,000,000],
($1,000,000 - $2,000,000], and ($2,000,000 - $5,000,000].
Step 5: Recursively, each interval can be further partitioned according to the 3-4-5 rule to form the next
lower level of the hierarchy:
- The first interval (-$400,000 - $0] is partitioned into 4 sub-intervals: (-$400,000 - -$300,000], ($300,000 - -$200,000], (-$200,000 - -$100,000], and (-$100,000 - $0].
- The second interval, ($0- $1,000,000], is partitioned into 5 sub-intervals: ($0 - $200,000],
($200,000 - $400,000], ($400,000 - $600,000], ($600,000 - $800,000], and ($800,000 $1,000,000].
- The third interval, ($1,000,000 - $2,000,000], is partitioned into 5 sub-intervals: ($1,000,000 $1,200,000], ($1,200,000 - $1,400,000], ($1,400,000 - $1,600,000], ($1,600,000 - $1,800,000],
and ($1,800,000 - $2,000,000].
- The last interval, ($2,000,000 - $5,000,000], is partitioned into 3 sub-intervals: ($2,000,000 $3,000,000], ($3,000,000 - $4,000,000], and ($4,000,000 - $5,000,000].
www.chennaiuniversity.net
www.chennaiuniversity.net
Concept hierarchy generation for category data
A concept hierarchy defines a sequence of mappings from set of low-level concepts to higher-level,
more general concepts.
It organizes the values of attributes or dimension into gradual levels of abstraction. They are useful in
mining at multiple levels of abstraction
www.chennaiuniversity.net
www.chennaiuniversity.net
Loose coupling:
The data mining system is not integrated with the database or data warehouse system beyond their use
as the source of the initial data set to be mined, and possible use in storage of the results. Thus, this
architecture can take advantage of the exibility, eciency and features such as indexing that the
database and data warehousing systems may provide. However, it is dicult for loose coupling to
achieve high scalability and good performance with large data sets as many such systems are memorybased.
Semitight coupling:
Some of the data mining primitives such as aggregation, sorting or pre computation of statistical
functions are eciently implemented in the database or data warehouse system, for use by the data
mining system during mining-query processing. Also, some frequently used inter mediate mining results
can be pre computed and stored in the database or data warehouse system, thereby enhancing the
performance of the data mining system.
Tight coupling:
The database or data warehouse system is fully integrated as part of the data mining system and
thereby provides optimized data mining query processing. Thus, the data mining sub system is treated
as one functional component of an information system. This is a highly desirable architecture as it
facilitates ecient implementations of data mining functions, high system performance, and an
integrated information processing environment
From the descriptions of the architectures provided above, it can be seen that tight coupling is the best
alternative without respect to technical or implementation issues. However, as much of the technical
infrastructure needed in a tightly coupled system is still evolving, implementation of such a system is
non-trivial. Therefore, the most popular architecture is currently semi tight coupling as it provides a
compromise between loose and tight coupling.
Categorize the measures
A measure is distributive, if we can partition the dataset into smaller subsets, compute the
measure on the individual subsets, and then combine the partial results in order to arrive at the
measures value on the entire (original) dataset
A measure is algebraic if it can be computed by applying an algebraic function to one or more
distributive measures
A measure is holistic if it must be computed on the entire dataset as a whole
www.chennaiuniversity.net
www.chennaiuniversity.net
In other words, in many real-life situations, it is helpful to describe data by a single number that is most
representative of the entire collection of numbers. Such a number is called a measure of central
tendency. The most commonly used measures are as follows. Mean, Median, and Mode
Mean: mean, or average, of numbers is the sum of the numbers divided by n. That is:
Example 1
The marks of seven students in a mathematics test with a maximum possible mark of 20 are given
below:
15 13 18 16 14 17 12
Find the mean of this set of data values.
Solution:
www.chennaiuniversity.net
www.chennaiuniversity.net
Median: median of numbers is the middle number when the numbers are written in order. If is even,
the median is the average of the two middle numbers.
Example 2
The marks of nine students in a geography test that had a maximum possible mark of 50 are given
below:
47 35 37 32 38 39 36 34 35
Find the median of this set of data values.
Solution:
Arrange the data values in order from the lowest value to the highest value:
32
34
35
35
36
37
38
39
47
The fifth data value, 36, is the middle value in this arrangement.
Note:
In general:
If the number of values in the data set is even, then the median is the average of the two middle values.
Example 3
Find the median of the following data set:
12 18 16 21 10 13 17 19
Solution:
www.chennaiuniversity.net
www.chennaiuniversity.net
Arrange the data values in order from the lowest value to the highest value:
10 12 13 16 17 18 19 21
The number of values in the data set is 8, which is even. So, the median is the average of the two
middle values.
Trimmed mean
A trimming mean eliminates the extreme observations by removing observations from each end of the
ordered sample. It is calculated by discarding a certain percentage of the lowest and the highest scores
and then computing the mean of the remaining scores.
Mode of numbers is the number that occurs most frequently. If two numbers tie for most frequent
occurrence, the collection has two modes and is called bimodal.
The mode has applications in printing. For example, it is important to print more of the most popular
books; because printing different books in equal numbers would cause a shortage of some books and an
oversupply of others.
Likewise, the mode has applications in manufacturing. For example, it is important to manufacture
more of the most popular shoes; because manufacturing different shoes in equal numbers would cause
a shortage of some shoes and an oversupply of others.
Example 4
Find the mode of the following data set:
48
44
48
45
42
49
48
Solution:
The mode is 48 since it occurs most often.
It is possible for a set of data values to have more than one mode.
If there are two data values that occur most frequently, we say that the set of data values is
bimodal.
www.chennaiuniversity.net
www.chennaiuniversity.net
If there is three data values that occur most frequently, we say that the set of data values is
trimodal
If two or more data values that occur most frequently, we say that the set of data values is
multimodal
If there is no data value or data values that occur most frequently, we say that the set of data
values has no mode.
The mean, median and mode of a data set are collectively known as measures of central tendency as
these three measures focus on where the data is centered or clustered. To analyze data using the
mean, median and mode, we need to use the most appropriate measure of central tendency. The
following points should be remembered:
The mean is useful for predicting future results when there are no extreme values in the data
set. However, the impact of extreme values on the mean may be important and should be
considered. E.g. The impact of a stock market crash on average investment returns.
The median may be more useful than the mean when there are extreme values in the data set
as it is not affected by the extreme values.
The mode is useful when the most common item, characteristic or value of a data set is
required.
Measures of Dispersion
Measures of dispersion measure how spread out a set of data is. The two most commonly used
measures of dispersion are the variance and the standard deviation. Rather than showing how data are
similar, they show how data differs from its variation, spread, or dispersion.
Other measures of dispersion that may be encountered include the Quartiles, Interquartile range (IQR),
Five number summary, range and box plots
Variance and Standard Deviation
Very different sets of numbers can have the same mean. You will now study two measures of dispersion,
which give you an idea of how much the numbers in a set differ from the mean of the set. These two
measures are called the variance of the set and the standard deviation of the set
www.chennaiuniversity.net
www.chennaiuniversity.net
Percentile
Percentiles are values that divide a sample of data into one hundred groups containing (as far as
possible) equal numbers of observations.
The pth percentile of a distribution is the value such that p percent of the observations fall at or below
it.
The most commonly used percentiles other than the median are the 25th percentile and the 75th
percentile.
The 25th percentile demarcates the first quartile, the median or 50th percentile demarcates the second
quartile, the 75th percentile demarcates the third quartile, and the 100th percentile demarcates the
fourth quartile.
Quartiles
Quartiles are numbers that divide an ordered data set into four portions, each containing approximately
one-fourth of the data. Twenty-five percent of the data values come before the first quartile (Q1). The
median is the second quartile (Q2); 50% of the data values come before the median. Seventy-five
percent of the data values come before the third quartile (Q3).
Q1=25th percentile=(n*25/100), where n is total number of data in the given data set
Q2=median=50th percentile=(n*50/100)
Q3=75th percentile=(n*75/100)
Inter quartile range (IQR)
www.chennaiuniversity.net
www.chennaiuniversity.net
The inter quartile range is the length of the interval between the lower quartile (Q1) and the upper
quartile (Q3). This interval indicates the central, or middle, 50% of a data set.
IQR=Q3-Q1
Range
The range of a set of data is the difference between its largest (maximum) and smallest (minimum)
values. In the statistical world, the range is reported as a single number, the difference between
maximum and minimum. Sometimes, the range is often reported as from (the minimum) to (the
maximum), i.e., two numbers.
Example1:
Given data set: 3, 4, 4, 5, 6, 8
The range of data set is 38. The range gives only minimal information about the spread of the data, by
defining the two extremes. It says nothing about how the data are distributed between those two
endpoints.
Example2:
In this example we demonstrate how to find the minimum value, maximum value, and range of the
following data: 29, 31, 24, 29, 30, 25
1. Arrange the data from smallest to largest.
24, 25, 29, 29, 30, 31
2. Identify the minimum and maximum values:
Minimum = 24, Maximum = 31
3. Calculate the range:
Range = Maximum-Minimum = 3124 = 7.
Thus the range is 7.
Five-Number Summary
The Five-Number Summary of a data set is a five-item list comprising the minimum value, first quartile,
median, third quartile, and maximum value of the set.
{MIN, Q1, MEDIAN (Q2), Q3, MAX}
Box plots
www.chennaiuniversity.net
www.chennaiuniversity.net
A box plot is a graph used to represent the range, median, quartiles and inter quartile range of a set of
data values.
www.chennaiuniversity.net
www.chennaiuniversity.net
Example: Draw a boxplot for the following data set of scores:
76
79
76
74
75
71
85
82
82
79
81
74
75
76
76
79
79
81
82
82
85
www.chennaiuniversity.net
www.chennaiuniversity.net
Since the medians represent the middle points, they split the data into four equal parts. In other words:
Outliers
Outlier data is a data that falls outside the range. Outliers will be any points below Q1 1.5IQR or
above Q3 + 1.5IQR.
Example:
Find the outliers, if any, for the following data set:
10.2, 14.1, 14.4, 14.4, 14.4, 14.5, 14.5, 14.6, 14.7, 14.7, 14.7, 14.9, 15.1, 15.9, 16.4
To find out if there are any outliers, I first have to find the IQR. There are fifteen data points, so the
median will be at position (15/2) = 7.5=8th value=14.6. That is, Q2 = 14.6.
Q1 is the fourth value in the list and Q3 is the twelfth: Q1 = 14.4 and Q3 = 14.9.
Then IQR = 14.9 14.4 = 0.5.
Outliers will be any points below:
Q1 1.5IQR = 14.4 0.75 = 13.65 or above Q3 + 1.5IQR = 14.9 + 0.75 = 15.65.
Then the outliers are at 10.2, 15.9, and 16.4.
The values for Q1 1.5IQR and Q3 + 1.5IQR are the "fences" that mark off the "reasonable" values
from the outlier values. Outliers lie outside the fences.
Graphic Displays of Basic Descriptive Data Summaries
1 Histogram
A histogram is a way of summarizing data that are measured on an interval scale (either discrete or
continuous). It is often used in exploratory data analysis to illustrate the major features of the
distribution of the data in a convenient form. It divides up the range of possible values in a data set into
classes or groups. For each group, a rectangle is constructed with a base length equal to the range of
values in that specific group, and an area proportional to the number of observations falling into that
group. This means that the rectangles might be drawn of non-uniform height.
www.chennaiuniversity.net
www.chennaiuniversity.net
The histogram is only appropriate for variables whose values are numerical and measured on an interval
scale. It is generally used when dealing with large data sets (>100 observations)
A histogram can also help detect any unusual observations (outliers), or any gaps in the data set.
2 Scatter Plot
A scatter plot is a useful summary of a set of bivariate data (two variables), usually drawn before
working out a linear correlation coefficient or fitting a regression line. It gives a good visual picture of
the relationship between the two variables, and aids the interpretation of the correlation coefficient or
regression model.
Each unit contributes one point to the scatter plot, on which points are plotted but not joined. The
resulting pattern indicates the type and strength of the relationship between the two variables.
www.chennaiuniversity.net
www.chennaiuniversity.net
A scatter plot will also show up a non-linear relationship between the two variables and whether or not
there exist any outliers in the data.
3 Loess curve
It is another important exploratory graphic aid that adds a smooth curve to a scatter plot in order to
provide better perception of the pattern of dependence. The word loess is short for local regression.
www.chennaiuniversity.net
www.chennaiuniversity.net
4 Box plot
The picture produced consists of the most extreme values in the data set (maximum and minimum
values), the lower and upper quartiles, and the median.
5 Quantile plot
Displays all of the data (allowing the user to assess both the overall behavior and unusual
occurrences)
Plots quantile information
For a data xi data sorted in increasing order, fi indicates that approximately 100 fi% of
the data are below or equal to the value xi
www.chennaiuniversity.net
www.chennaiuniversity.net
The f quantile is the data value below which approximately a decimal fraction f of the data is found. That
data value is denoted q(f). Each data point can be assigned an f-value. Let a time series x of length n be
sorted from smallest to largest values, such that the sorted values have rank. The f-value for each
observation is computed as . 1,2,..., n . The f-value for each observation is computed as,
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net
www.chennaiuniversity.net