Ceramapure Repair Procedure
Ceramapure Repair Procedure
Ceramapure Repair Procedure
Remove burrs caused by field cutting of ends or handling damage and smooth out the edge of the
lining if rough.
2.
Remove all traces of oil, grease, asphalt, dust, dirt, chalking, etc.
3.
Remove any damaged lining caused by field cutting operations or handling, and clean any exposed
metal by sanding or scraping, sandblasting or power tool cleaning roughening is also acceptable. It
is recommended that any loose lining be removed by chiseling, cutting, or scraping into welladhered coated area before patching. Be sure to roughen and overlap at least 1" of lining in the
area to be repaired.
4.
With the area to be sealed or repaired cleaned and suitably roughened, apply a coat of
CeramapurePL90 Ceramic Epoxy using the following procedure:
5.
It is important to coat the entire freshly cut exposed metal surface of the cut pipe end. To ensure proper
sealing, overlap at least one inch of the lining with this repair material.