Professional Documents
Culture Documents
Ajuste Oclusal de OcclusionMadeEasy Preview
Ajuste Oclusal de OcclusionMadeEasy Preview
11
Occlusal
adjustment
185
During the initial clinical examination, it is
frequent to notice occlusal anomalies due
to the coronal decay, to abrasion, dental
migration, even to the presence of unsuitable
prosthetic restorations which generated a
pathogenic malocclusion (Fig. 1). Besides,
the patient may or may not suffer from
changes in the mandibular kinematics, from
1 Pathogenic ICP.
articular disorders or from modifications
of the muscular activity, resulting from
movements generated during the occlusal
functions. In these clinical situations, the
occlusal functions must be improved prior to any treatment, all the more if a prosthetic
rehabilitation is envisaged.
Occlusal adjustment is a therapeutic modification of occlusal tables by subtraction or by
addition to restore the occlusal stability of the arches during the occlusion. Most of the
time, it refers to adjustment techniques by selective grinding of the enamel structures
which oppose each other during the occlusal functions, or during the access to the ICP.
This chapter presents a technique of occlusal adjustment performed at first on the casts
mounted on articulator in centric relation, then transferred in the mouth following a
timeline noted on a chart of modifications. The occlusal adjustment is performed on a
natural complete set of teeth, but the principles can be applied to cases of preprosthetic
adjustment and their numerous indications.
NECESSARY EQUIPMENT
For the occlusal analysis on articulator
186
Equipment
Use
Ref
Miller tweezer
BK 132 Dr Bausch
Shimstock mtal 12
BK 35 Dr Bausch
CR marking
BK 21 Dr Bausch
Guidance marking
BK 22 Dr Bausch
Interferences marking
BK 23 Dr Bausch
Corrections on plaster
Hard toothbrush
Erasing artefacts
Pencil 0,5 HB
Use
Ref
Miller tweezer
BK 132 133
Dr Bausch
BK 143 Dr Bausch
CR marking
BK 10 Dr Bausch
Interferences marking
BK 09 Dr Bausch
805.314.01
FG olive bur
8368-204.016 (023)
8368-204.016 (023)
862EF.204.012
8862.204.012
Q tips
Silicone polisher
Transfer key
Transparent silicone
(shore 90)
Ceramaster Shofu
Memosyl 2
Block Out Bisico
11 Occlusal adjustment
Historically, we can list at least twenty techniques of occlusal adjustment, which differ
according to the nature of the reference position, either articular or muscular, the
sequence of correction, the concepts of lateral guidance or the type of stabilization.
The first authors, (Stuart, 1930; Schuyler, 1935; Lauritzen, 1965) followed by Ramfjord,
Ash (1966), Dawson (1971) and Solnit (1988) suggested adjusting the defective alignment
of cusps and fossae (generating a shift in ICP) by a widening of the fossa at the expense
of the neighboring zones of contacts in centric relation. They thus made sure to follow
the main rule: do not alter the primary cusps, while creating a coincidence between CR
and ICP.
Jankelson (1955), Glickman (1958), Wirth (1976), Jeanmonod (1988), Smuckler (1991) and
Abjean (1997) developed their approach on a harmonious muscular functioning presenting
synchronous and symmetric contractions of the masticatory muscles supposed to result
in an optimal ICP. During the first phase, a muscle reconditioning splint is prescribed. The
adjustment is then performed by using the re-educated muscles to drive the mandible
towards ICP.
The current consensus recommends localizing the therapeutic articular reference position
(CR) with the practitioners help such as it was described in the chapter on centric relation.
A muscular reconditioning with a splint might be necessary first (Okeson, 1998).
A meticulous clinical examination associated with an occlusal analysis on articulator allows
to put the indication of the occlusal adjustment.
The adjustment of the models on articulator must be a systematic prerequisite which
allows to verify the feasibility of the treatment by analyzing the anterior guidance. It
allows to quantify the corrections and assess their incidence on the vertical dimension
of occlusion. An anterior functional guidance in the VDICP authorizes the adjustment if
there is a small number of alterations.
187
188
3 Activating the
Before taking impressions, its better to eliminate very egressed teeth, which are obvious
prematurities, and thus an obstacle in excursions (Fig. 2).
The occlusal analysis on articulator (described in a previous chapter) allows to observe
dental arches from all angles as well as their simulated movements in all the directions.
During the searching and the marking of contacts, the articulator can be locked either
in centric, or on one side only, in order to obtain reproducible lateral positions. Using
wedges (or protrusion screws when they exist) allows the preservation of the lateral
or protrusion positions (Fig. 3). These elements easily enable to perform an occlusal
instrumental analysis compared to what it is possible to make on the patient.
Articulating paper of different colors is used to identify sequences more easily.
According to the adjustment process, the successive corrections are noted in a grinding
index form (Fig. 4), indicating the tooth number, the cusp, the involved slope and the
corrected cusp slope, or marked on an occlusal diagram (Fig.5). Every corrected zone
is marked with a pencil on the plaster model, in order to avoid noting several times the
corrections on the same tooth (Fig. 6). The grinding chart allows to write down accurately
Occlusion made easy - Chapter 11 - Publisher : Espace id - Paris
11 Occlusal adjustment
189
the corrections to be made on the patients teeth in the order of their appearance.
Casts are retouched with a bistoury blade #15
Adjustment chronology
Sequence
Objective
Correction of CR//ICP
discrepancy
Centering
Creation of stable
contacts
Stabilization
Correction of
translatory movements
(diduction, protrusion,
elimination of the
interferences)
Guidance
Improvement of
stability in centric
Stabilization
190