Professional Documents
Culture Documents
Understanding Generator Set Ratings: Chad Dozier Market Development Manager Electric Power Division
Understanding Generator Set Ratings: Chad Dozier Market Development Manager Electric Power Division
Chad Dozier
Market Development Manager
Electric Power Division
August 2013
INTRODUCTION
Generator set ratings may seem complex, but their basic purpose is simple: fit the application
needs at the optimum reliability, performance, and cost. An improper rating means either buying
more capacity than needed or risking shorter life to overhaul, more repairs, and more downtime.
Ratings have changed in recent years, and more sophisticated switchgear can be integrated with
generator sets. That means more flexibility to specify generating systems that closely match a
specific installation requirement.
The key to choosing the right rating is to understand the application in detail. That means not only
knowing the type of duty but also answering:
What is the average load factor?
What is the maximum required load?
How many hours per year will the generator sets run?
Will the generator sets be run isolated from or in parallel with the utility?
RATINGS DEFINED
Caterpillar defines five basic generator set ratings: Emergency Standby Power (ESP), Standby,
Mission Critical Standby, Prime, and Continuous. Cat generator set ratings differ in certain
respects from those defined by the industry standard ISO8528-1 (Table 1).
Caterpillar
Table 1
Here are basic descriptions of the Cat genset ratings:
Standby
In this application, the generator set is capable of providing emergency backup power at the
nameplate rating for the duration of an outage. The average load factor of a Standby rated
generator set should be no more than 70% of the nameplate rating and applied to varying loads.
A Standby generator set can run for a maximum of 500 hours per year. The normal standby
rating is not for use in utility paralleling applications. For example, a 3 MW standby rated
generator set will provide power for the duration of an outage. It should be run for up to 500 hours
per year and have an average load factor of 2.1 MW.
Caterpillar
Caterpillar
Prime
In this application, the generator set is capable of providing power to a varying load for an
unlimited number of hours per year. A Prime rated generator set is capable of providing full
nameplate rating for a period of time, but must have an average load factor of no more than 70%
of the Prime rating. Ten percent overload is allowed for emergencies for a maximum of 1 hour in
12, and for no more than 25 hours per year. The standard prime rating is for use in either utility
paralleling or isolated applications. For example, a 2.7 MW rated unit may provide the full
nameplate rating for a short duration, but should have a maximum average load of 1.89 MW (not
including generator set non-running time per ISO8528-1). The generator set can also provide 3
MW of power in emergencies as defined above. An example of the Prime rating is shown in
Figure 3.
LOAD MANAGEMENT
A Prime rated generator applied under load management guidelines allows for a Prime rated
generator set to be used in parallel with the utility. A Prime rated generator set under load
management guidelines can run for a maximum of 500 hours per year. This generator set has
the same nameplate rating as a Prime rated unit, but allows for an average load factor of up to
100%. The Prime rating with load management guidelines does not allow for a 10% overload
capability. For example, these guidelines state that a 2.7 MW unit (same nameplate rating as the
Prime rated unit) can be run at 2.7 MW for a maximum of 500 hours.
Load Management Practices
There are two basic load management practices: base loading and peak shaving. In base
loading, the generator set operates at a fixed kW output, and the utility provides power for any
peaks above that level. In this scenario the end user may export power to the grid if more power
is being generated then is required by the facility loads, and the appropriate agreements with the
utility are in place. An example of base loading is shown in Figure 4.
Caterpillar
In peak shaving, the utility provides a fixed amount of kW and the end user deploys the
generators to pick up, or shave, demand peaks and any other load requirement over that fixed
amount of load. Peak shaving can be used during times of the year when the utility has demand
higher than its capacity. In this case, the utility provides incentives to generator set owners to use
peak shaving to decrease the load demand from the grid. An example of peak shaving is shown
in Figure 5.
Caterpillar
and monitor the power supplied from the utility. This ensures that the generator sets are providing
the proper load and are not operating outside of their rating guidelines.
CONCLUSION
Regardless of the application, generator set ratings help ensure that customers power needs are
met and that generating equipment is protected from premature wear. Choosing the right rating
means making the proper tradeoffs between run hours, peak load, and average load. The proper
rating means the customer receives the optimum combination of installed cost and long-term cost
of ownership.
ABOUT
About Caterpillar
For more than 85 years, Caterpillar Inc. has been making progress possible and driving positive
and sustainable change on every continent. With 2012 sales and revenues of $65.9 billion,
Caterpillar is a technology leader and the worlds leading manufacturer of construction and mining
equipment, clean diesel and natural gas engines and industrial gas turbines.
Diesel Solutions Center: www.Cat-ElectricPower.com
Online Community: https://caterpillar.lithium.com/t5/Electric-Power-Generation/ct-p/EPG
Facebook: http://www.facebook.com/Caterpillar.Electric.Power
YouTube: http://www.youtube.com/CatPowerGeneration
Caterpillar