Professional Documents
Culture Documents
L5210 Programming Guide
L5210 Programming Guide
L5210/L7000 Series
Security System
Programming Guide
800-19976
12/14 Rev. B
L5210/L7000
Table of Contents
Entering Programming Mode ....................................................................................................................................3
Programming the Data Fields ...................................................................................................................................3
Loading a Default Set ................................................................................................................................................3
Exiting Programming Mode .......................................................................................................................................3
Data Fields ................................................................................................................................................................4
Change Installer Code ...........................................................................................................................................4
Program System Type ...........................................................................................................................................4
Program Date and Time.........................................................................................................................................5
Program Communications .....................................................................................................................................6
Program Zones ......................................................................................................................................................7
Program Keys ........................................................................................................................................................8
Program Reporter ................................................................................................................................................10
Program Sounder.................................................................................................................................................15
Program System Settings ....................................................................................................................................16
Program the Z-Wave Module ...............................................................................................................................17
Communication Diagnostics ................................................................................................................................18
Zone Programming Worksheet ...............................................................................................................................20
Explanation of Zone Assignment Table Headings ...............................................................................................20
5800 Series Transmitter Loop Numbers Diagram...................................................................................................23
LYNX Touch L5210 Programming Default Values ..................................................................................................24
LYNX Touch L7000 Programming Default Values ..................................................................................................27
LYNX Touch Series Summary of Connections Diagram ........................................................................................31
Refer to the LYNX Touch Series Installation and Setup Guide P/N 800-19974 or later for detailed
information on programming the system. The Installation and Setup Guide contains full descriptions
for all data fields.
UL
LYNX Touch is not intended for UL985 Household Fire applications unless a 24-hour backup
battery (P/N LYNXRCHKIT-SHA) is installed.
-2-
1. Power-up the control and allow it to boot-up. System Standby is displayed on the touch screen. When the
boot-up is complete (approximately 1-2 minutes) Ready to Arm is displayed.
2. Select the Security icon.
3. Select the More tab on the first page of the Security Screen.
4. Select Tools icon.
5. Enter the Installer Code (4 + 1 + 1 + 2) on the displayed keypad.
5. The Installer Tools menu screen appears. Select the Program button. System Programming is displayed
and the Panic button is lit and the Home button alternately flashes red and green.
6. Select one of the following options to advance to that Programming screen:
Installer Code
Date Time
Zones
Keys
System Type
Communicator
Comm. Diagnostics
Reporter
Sounder
Default Config.
Reset Master Code
System Settings
Z-Wave
Note: If a different Installer Code has been programmed, enter: the New Installer Code.
Note: Refer to the Programming Default Values section of this manual to view the default values.
-3-
Screen Display
DATA FIELDS
Note: Preprogrammed defaults are shown on the screen display.
Installer Code
5000-100-129-V0
Phone Notification
Disabled
RF Jam
Disabled
RF Jam Log
RF Jam Log & Report
Note: The Speaker Phone feature is not available on the LYNX Touch L7000.
Speaker Phone
Disabled
Enabled
Two-Way Voice
Disabled
Enabled
RF House Code
Enter 2 digits, 00-31
Note: The Remote Phone feature is not available on the LYNX Touch L7000.
Remote Phone
Disabled
Enabled
Note: The Remote Phone feature is not available on the LYNX Touch L7000.
Phone Notification
Disabled
Keypad
Trouble
Note:
If Keypad or Trouble is selected you will be prompted to program a phone detect time.
Note: The Remote Phone feature is not available on the LYNX Touch L7000.
Phone Detect Time
1 Minute
2 Minutes
3 Minutes
4 Minutes
Events Log All
Note: If Press to Log All is selected the system will log the following events:
Alarm
Bypass
Open/Close
Trouble
Non-Security
Events Log Alarm
Enabled
Disabled
Events Log Bypass
Enabled
Disabled
Events - Log Open/Close
Enabled
Disabled
-4-
Screen Display
Events Log Trouble
Enabled
Non Security
Enabled
Remote Access Serial
Disabled
Date Time
5000-100-131-V0
Note: If you are installing a 4GL/4GLC or 3GL/3GLC, L5100-WiFi or ILP5 Communication Module, the
time and date will be programmed and updated automatically via Central Station. You must still
program the correct Time Zone below.
1.
2.
3.
4.
5.
Time Zone
Eastern (EST)
Start Month
March
Start Week
Second
End Month
November
Time Zone
Eastern (EST)
Central (CST)
Hawaii (HAST)
Mountain (MST)
Pacific (PST)
Alaska (AKST)
Brasilia (BRT)
Mid-Atlantic (MAT)
Atlantic (AST)
Newfoundland (NT)
July
August
September
October
November
December
Start Week
First
Second
Third
Fourth
Last
Next to Last
3rd from Last
End Month
January
February
March
April
May
June
July
August
September
October
November
December
-5-
Screen Display
End Week
First
Program Communications
Communicator
5000-100-132-V0
Communications Path
None
APL
Disabled
City ID
CS ID
Sub ID
Supervision
24 Hours
Communicator
Program the following options:
Communications Path
City ID
CS ID
Supervision
Remote Acc. Comm.
GSM Fault Time OR
IP Fault Time
APL
Sub ID
Old Alarm Time
Multi Mode Comm.
Communications Path
None
IP
GSM
WiFi
WiFi & GSM
Advanced Protection Logic
Enabled
Disabled
Primary City Identification
Enter 2 digits
01-99
Primary Central Station Identification
Enter 2-digits (HEX)
01-FE
Primary Subscriber Identification
Enter 4-digits
0001-9999
Supervision
24 Hours
None
30 Days
Old Alarm Time
10 Minutes
30 Minutes
2 Hours
8 Hours
24 Hours
15 Minutes
1 Hour
4 Hours
12 Hours
-6-
Screen Display
IP Fault Time (min)
00
Use DHCP
Yes
No
Use DHCP
Yes
NIC IP Address
255.255.255.255
NIC IP Address (Appears only if no was selected in the Use DHCP Field)
Enter 4 part address
Subnet Mask (Appears only if no was selected in the Use DHCP Field)
Subnet Mask
255.255.255.255
Gateway IP Address
255.255.255.255
DNS Server IP Address
255.255.255.255
GSM Rollover
No
GSM 24 Hour Test (Appears only if WiFi and GSM was selected in the Communications
Path field)
Yes
No
Program Zones
Zones
5000-100-133-V0
Zones
Select from the following zone options:
1. New
2. Front Door
3. Back Door
4. Window
5. Motion Sensor
6. New
7. 45. New
Zones 46 to 48 are reserved for Garage Door Zones (L5210)
46. 48. New (Main)* Garage
Zones 45 to 48 are reserved for Garage Door Zones (L7000)
45. 48. New (Main)* Garage
Zones 49 to 64 (L5210)
49. 64. New
Zones 49 to 80 (L7000)
49. 80. New
Zones 140 to 147 (L5210 and L7000)
140. 147. 4 Button
Zones 148 to 155 (L5210 Only)
148. 155. New (Button Zones)
Z-Wave Thermostat zones (L5210)
180. 185. Temperature
Z-Wave Thermostat zones (L7000)
180. 187. Temperature
95. Fire
96. Medical
99. Police
Select a zone and then select Edit or Add New to program the next available zone.
Program the following options:(dependent upon Zone Type):
Serial Number
Loop Number
Zone Description 1
Zone Description 2
Device Type
Response Type
Report
Chime
Supervision
-7-
Screen Display
Serial Number
Loop Number
1
Zone Description 1
Zone Description 2
Device Type
Response Type
Not Used
Report
Yes
Chime
Disabled
Supervision
Supervised
Arm Night
No
Loop Number
1, 2, 3 or 4
Zone Description 1
The system announces the Zone Description. If desired, enter a zone descriptor.
Zone Description 2
The system announces the Zone Description. If desired, enter a zone descriptor.
Device Type
Choose from the following options (dependant upon the Zone):
New
Door
Window
Motion Sensor
Glass Break
Smoke Detector
Heat Sensor
Carbon Mono. Det.
Temperature
Flood
Environmental
Medical
Fire
Police
Garage Door
Other
Response Type
Choose from the following options (dependant upon the Device Type):
Not Used
Arm Stay
Fire No Verification
Entry Exit 1
Disarm
Monitor
Entry Exit 2
Silent Burglary
Garage
Interior Follower
Resident Response
Arm Away
24 Hour Silent
General Response
No Response
24 Hour Auxiliary
Perimeter
Resident Monitor
Interior With Delay
Day Night
General Monitor
Carbon Monoxide
24 Hour Audible
Fire With Verification
Garage Monitor
Trouble
Report
Yes
No
Chime
Disabled
Standard
Melody
Melody Long
Supervision
Hardwire Zone
Normal Open
Normal Closed
End of Line
Ascend
Ascend Long
Alert 1
Alert 2
RF Zone
Supervised
Unsupervised
Doorbell 1
Doorbell 2
Evolve
Temperature
High Temp
Low Temp
Arm Night (This option is only available if Motion Sensor is selected in the Response Type field.)
Yes
No
-8-
Screen Display
Program Keys
Keys
Keys
Select from the following options:
Edit
Add New
Delete
Key Type
4 Button Key
User
Key Type
Serial Number
Button Key 1 Zn 140
Button Key 3 Zn 142
Button Key 5 Zn 144
Button Key 7 Zn 146
Key Type
1 Button Key.
2 Button Key
4 Button Key
6 Button Key
8 Button Key
User
Master
Duress
Guest
User 3 through User 30 (L5210)
User 3 through User 46 (L7000)
User
Zone
Button Key 2 Zn 141
Button Key 4 Zn 143
Button Key 6 Zn 145
Button Key 8 Zn 147
Note: The Key must be associated with a specific User/User Code in order for it to operate. Refer to the
LYNX Touch Series User Guide for additional Information regarding User Codes.
Serial Number
0
Serial Number
When Serial Number has been selected Enter Serial Number or Activate is displayed.
The transmitter serial number and loop number can be enrolled via RF transmission OR
manually.
Enroll via RF Learning To enroll the device using RF Learning mode three transmissions
(open/close) of the device will be required. The initial transmission activates the RF
Learning mode. A second transmission enrolls the serial number and the system beeps two
times and displays Activate Sensor Again To Confirm. A third transmission will confirm the
serial number. The system beeps two times and returns to the Zone programming Screen.
Enroll Manually
Enter the 7-digit serial number printed on the transmitter using the displayed keypad and
select Done. The system beeps one time and returns to the Zone programming Screen
Zone
140
Button Key * - Zone *
Zone
Manually enter a specific two-digit Zone Number (140-155 L5210 OR 140-163 L7000).
Button Key * Zn *
Enter a function for each button key from the following options:
Disarm
Arm Away
Arm Stay
No Response
24 Hour Silent
24 Hour Audible
24 Hour Auxiliary
Silent Burglary
Fire No Verification
* Options are the same for each Button/Zone combination.
-9-
Screen Display
Program Reporter
Reporter
Primary CS Info
Phone Type
Contact Id: 4 Digit
Reporter
Note: The Follow Me Phone features are not available on the LYNX Touch L7000.
Program the following options:
Primary CS Info
Secondary CS Info
Follow Me Phone 1
Follow Me Phone 2
Report Selection
Options
Downloader
Primary Central Station Information
Phone Type
Communicator Type
Phone Type
None
Contact Id : 4 Digit
Contact Id : 10 Digit
SIA
Note:
Communicator Type
None
If SIA, Contact Id: 4 Digit, or Contact Id: 10 Digit is selected the Phone Number and Account
Number options will be displayed.
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Account Number
FFFF
Dynamic Priority
Phone Number
Enter the Primary Central Station Phone Number (Up to 20 digits)
Account Number
Enter the Primary Central Station Account Number
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note:
Dynamic Delay
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Report Tests
Enabled
If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Always Enabled (not selectable)
- 10 -
Screen Display
Secondary CS Info
Phone Type
None
Communicator Type
None
Communicator Type
None
GSM
WiFi
WiFi & GSM
IP
Note: If IP is selected the Dynamic Priority option will be displayed.
Phone Number
Account Number
FFFF
Dynamic Priority
None
Phone Number
Enter the Secondary Central Station Phone Number (Up to 20 digits)
Account Number
Enter the Secondary Central Station Account Number
Dynamic Priority
Redundant Reports
Preferred Telco
Preferred Radio
Note: If Preferred Telco or Preferred Radio is selected the Dynamic Delay option will be displayed.
Dynamic Delay
None
Report All
Press to Report All
Report Alarms
Enabled
Report Troubles
Enabled
Report Open/Close
Disabled
Report Tests
Enabled
Follow Me Phone 1
Dynamic Delay
None
15 Seconds
30 Seconds
60 Seconds
90 Seconds
Report All
Press to Report All
Report All Set
Report Alarms
Disabled
Enabled
Report Troubles
Disabled
Enabled
Report Open/Close
Disabled
Enabled
Report Tests
Always Enabled (not selectable)
Follow Me Phone 1 (This feature is not available on the LYNX Touch L7000)
Choose from the following options:
Phone Type
Phone Number
Report All
Report Alarms
Report Troubles
Report Open/Close
Report Tests
- 11 -
Screen Display
Phone Type
None
Phone Number
None
Report All
Press to Report All
Report Alarms
Disabled
Report Troubles
Disabled
Report Open/Close
Disabled
Report Tests
Disabled
Follow Me Phone 2
Phone Type
None
Phone Number
Report All
Press to Report All
Report Alarms
Disabled
Report Troubles
Disabled
Report Open/Close
Disabled
Report Tests
Disabled
- 12 -
Screen Display
Report Selection
Arm Away
Enabled
Arm Stay
Enabled
Disarm
Enabled
Exit Error
Enabled
Recent Closing
Enabled
Event Log Full
Enabled
Trouble
Enabled
Trouble Restore
Enabled
Alarm Restore
Enabled
Alarm Cancel
Enabled
Test
Enabled
Test Restore
Enabled
Bypass
Enabled
Bypass Restore
Enabled
AC Loss
Enabled
AC Loss Restore
Enabled
- 13 -
Bypass
AC Loss
Low Battery
RF Low Battery
Bypass Restore
AC Loss Restore
Low Battery Restore
RF Low Battery Restore
Screen Display
Low Battery
Enabled
Low Battery Restore
Enabled
RF Low Battery
Enabled
RF Low Battery Restore
Enabled
Options
PBX
Number of Reports
2 Reports
Report Frequency
Never
Downloader
Downloader
Phone Answer
Yes
- 14 -
Screen Display
Modem Speed
Slow
Ans. Machine Defeat
Yes
Ring Counter
2
Callback Number
Callback Number
Enter a Callback Number
Flexible Callback
Flexible Callback
Yes
No
No
Number
Program Sounder
Sounder
Sounder
Arm Confirm
RF Keyfob
Arm Confirm
None
All RF
RF Key Fob
RF Keypad
- 15 -
Screen Display
Entry Delay 1
30 Seconds
Entry Delay 2
30 Seconds
Exit Delay
60 Seconds
Backlight Timeout
Entry Delay 1
None
15 Seconds
30 Seconds
45 Seconds
60Seconds
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Entry Delay 2
None
15 Seconds
30 Seconds
45 Seconds
60Seconds
90 Seconds
2 Minutes
3 Minutes
4 Minutes
Exit Delay
45 Seconds
60 Seconds
90 Seconds
2 Minutes
Backlight Timeout
No
No
30 Seconds
Quick Arm
Quick Arm
Yes
Quick Exit
Yes
Restart Exit Time
Yes
Force Bypass
No
Exit Warning
Yes
Auto Stay Arming
Yes
Yes
No
Quick Exit
Yes
No
Force Bypass
Yes
No
Exit Warning
Always Enabled (not selectable)
- 16 -
Screen Display
Lack of Usage Notify
Disabled
Power-Up in Previous
Yes
Display Alarm Cancel
Yes
Display Exit Time
Yes
Cross Zone Delay
None
Cross Zone 1
Cross Zone 1
Disabled
Disabled
Cross Zone 2
Cross Zone 2
Disabled
Disabled
Z - Wave
5100-100-067-V0
Z-Wave
Enabled-Installed Telephone
Temperature Display
Fahrenheit
Note: This procedure must be completed any time that the panel has been defaulted or
updated.
Z-Wave
Select from the following options:
Enabled Installed Telephone Side
Disabled
Temperature Display
Select from the following options:
Fahrenheit
Celsius
- 17 -
Communications Diagnostics
Note: For additional information regarding these fields, refer to the LYNX Touch Installation and Setup Guide P/N 800-19974
or higher.
Comm. Diagnostics
Communication Diagnostics
Choose from the following options (depending upon the Communication Module that is
installed:
Communication
Status
Communication
ID Numbers
WiFi Location
Ethernet
Information
Test
Communication
WiFi Status
GSM
Information
Setup
Communication
Configure
WiFi
Communication Status - Provides a status of the IP or Cellular communications paths and performs a self-test of the
advanced encryption standard (AES) algorithm.
Message Function
GSM OR IP: Displays Network Connectivity status
Encryption: Displays result of encryption test (Pass or Fail)
AlarmNet Registration: Displays Account Registration status
Ethernet Information - Displays IP information if the IP Communication Path is enabled.
Message Function
Physical Link: Confirms physical link connection and speed
DHCP: Displays status of server
NIC IP Address: Displays the communication devices assigned IP address
Subnet Mask:
Gateway IP Address:
DNS Server IP Address:
Displays the 32-bit address mask used to indicate the portion (bits) of the
IP address that is being used for the subnet address
Displays the IP address assigned to the Gateway
Displays the IP address assigned to the DNS server
GSM Information - Displays GSM information if the GSM communication path is enabled and the device is registered.
Message Function
Cell Registration: Displays registration status
Primary RSSI: Displays primary site RSSI signal strength (1 to 5 stars)
GPRS:
Displays availability of GPRS service.
(2G only, always available in 3G/4G)
Country: Displays country code
Network: Displays network code
LAC: Displays local area code
Cell: Displays base station ID (4-digit in 2G or 6-digit in 3G/4G)
Base Station: (2G only) Displays Base Station Antenna Sector
Pri Sync Code: (3G/4G only) Displays primary sync code
Channel: Displays control in use
Second Site RSSI: Displays presence of Secondary site RSSI level availability
If the GSM is not registered the following may be displayed:
Searching for Coverage! Searching for cell network
SIM Error! No SIM card present of SIM card faulty
Cell Registration: SIM Not Active SIM is not activated
Cell Registration: Not Registered Not registered with the cell network
Communication ID Numbers- Displays programmed SIM card information for the installed communication module.
Message Function
MAC: Displays MAC address
MAC CRC: Displays MAC CRC number
SCID: Displays SIM card identification number
IMEI: Displays communication module identity number
WiFi* Displays physical address of the WiFi module
WiFi Ver* Displays WiFi Module software version
* If applicable
- 18 -
Communications Diagnostics
Test Communication - Performs network diagnostics and sends test alarms to the network. The following tests are
available depending on the type of communications module installed.
Message Function
Send Cellular Message: Available if Cellular communication path is enabled
Test Ethernet: Available if IP or WiFi communication path is enabled
Send Ethernet Message: Available if IP or WiFi communication path is enabled
Send Any: Available if IP or WiFi and Cellular communication path is enabled
Setup Communication Registers the LYNX Touch and its associated communication module, update configuration files
or reset factory defaults.
Selection Function
Download Config File: The device configuration file will be downloaded
Register Device: Registers the module with AlarmNet
Register Device With PIN: Used enter PIN when replacing one module with another
Update Server: The communication device uploads its configuration to the server
Factory Defaults: The communication device is reset to factory default values
WiFi Stats Displays WiFi Specific Diagnostics information (Not intended for Installer use)
- 19 -
Loop
No.
N/A
Device
Type
New
Chime
Supervision
Not Used
Alarm
Report
Yes
Disabled
End of Line
Door
Entry Exit 1
Yes
Standard
Supervised
Arm
Night
N/A
N/A
Door
Entry Exit 1
Yes
Standard
Supervised
N/A
N/A
N/A
Response Type
Window
Perimeter
Yes
Standard
Supervised
N/A
Motion Sensor
Yes
Disabled
Supervised
No
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
- 20 -
Transmitter
Serial Number
N/A
Zone
Descriptor
(HW Zone)
Front
Back
Device
Type
Response
Type
Report
Chime
Supervision
Arm
Night
45
New
Not Used
No
Standard
Supervised
N/A
Main
46
New
Not Used
No
Standard
Supervised
N/A
Main
Main
Main
Zone
No.
43
Transmitter
Serial Number
Zone
Descriptor
44
47
New
Not Used
No
Standard
Supervised
N/A
48
New
Not Used
No
Standard
Supervised
N/A
4 Button
Arm Away
No
Disabled
Button
N/A
N/A
N/A
N/A
N/A
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
140
141
4 Button
Disarm
No
Disabled
Button
N/A
142
4 Button
Arm Stay
No
Disabled
Button
N/A
N/A
N/A
N/A
N/A
143
4 Button
No Response
No
Disabled
Button
N/A
144
4 Button
Arm Away
No
Disabled
Button
N/A
N/A
N/A
N/A
N/A
145
4 Button
Disarm
No
Disabled
Button
N/A
146
4 Button
Arm Stay
No
Disabled
Button
N/A
N/A
N/A
147
4 Button
No Response
No
Disabled
Button
N/A
N/A
N/A
- 21 -
Loop
No.
Device
Type
Response
Type
N/A
Temperature
Report
Chime
Supervision
Arm
Night
Transmitter
Serial Number
Yes
Disabled
High Temp
N/A
N/A
Yes
Disabled
Low Temp
N/A
N/A
Yes
Disabled
High Temp
N/A
N/A
N/A
Zone
Descriptor
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
180
181
N/A
Temperature
Monitor
Monitor
182
N/A
Temperature
Monitor
183
N/A
Temperature
Monitor
Yes
Disabled
Low Temp
N/A
184
N/A
Temperature
Monitor
Yes
Disabled
High Temp
N/A
N/A
185
N/A
Temperature
Monitor
Yes
Disabled
Low Temp
N/A
N/A
186
N/A
Temperature
Monitor
Yes
Disabled
High Temp
N/A
N/A
187
N/A
Temperature
Monitor
Yes
Disabled
Low Temp
N/A
N/A
95
N/A
Fire
Fire No Verif.
Yes
Disabled
Panic Trigger
N/A
96
N/A
Medical
Not Used
Yes
Disabled
Panic Trigger
N/A
99
N/A
Police
24 Hour Silent
Yes
Disabled
Panic Trigger
N/A
Smoke Detector
Heat Sensor
Carbon Mono. Det.
Temperature
Flood
Environmental
Medical
Police
Fire
Garage Door
Other
Response Type - Dependent upon the Device Type that has been selected.
Entry Exit 1
Entry Exit 2
Perimeter
Interior Follower
Day/Night
24 Hour Silent
Garage Monitor
24 Hour Audible
24 Hour Auxiliary
Fire No Verification
Interior with Delay
Monitor
Carbon Monoxide
Trouble
Arm Stay
Arm Away
Disarm
No Response
Silent Burglary
Resident Monitor
Resident Response
General Monitor
General Response
Fire With Verification
Garage
Wireless Zone
(Zone 2-64 L5210)
(Zone 2-80 L7000)
Supervised
Unsupervised
Key
(Zone 140-155 L5210)
(Zone 140-163 L7000)
Button
- 22 -
Temperature
(Zone 180-185 L5210)
(Zone 180-187 L7000)
High Temp
Low Temp
LOOP 1
(LOW
SENSITIVITY
LOOP 1
(LOW
SENSITIVITY
LOOP 2
(HIGH
SENSITIVITY)
LOOP 2
(HIGH
SENSITIVITY)
LOOP 3 (TEMP)
LOOP 3 (TEMP)
LOOP 4 (TAMPER)
LOOP 4 (TAMPER)
5800PIR-RES
ENROLL AS "RF"
LOOP 3
LOOP 4
OF
F
LOOP 1
LOOP
3
5 8 0 0 WAV E
P RO G R A M
HOUSE ID
5804E
ENROLL AS "BR"
LOOP 2
(REED)
5 8 0 4 B D / 5 8 0 4 B DV
ENROLL AS "BR"
PROGRAM HOUSE ID
LOOP 1
5816MN
ENROLL AS "RF"
5818MNL
ENROLL AS "RF"
MIC
SERIAL #2
LOOP 4
ME
SSAG
SERIAL #1
LOOP 4
SERIAL #2
LOOP 2
5822T
ENROLL AS "RF"
5828/5828V
P RO G R A M
HOUSE ID
LOOP 1
(HIGH
SECURITY)
5834-2
ENROLL AS "BR"
SERIAL #1
LOOP 3
AW
AY
SERIAL #1
LOOP 4
LOOP 2
(STANDARD
SECURITY)
SERIAL #1
LOOP 2
1
2
SERIAL #2
LOOP 3
3
4
SERIAL #1
LOOP 1
SERIAL #1
LOOP 1
5834-4
ENROLL AS "BR"
5853
ENROLL AS "RF"
5869
ENROLL AS "RF"
LOOP 1
(LOW SENSITIVITY)
LOOP 2
(HIGH SENSITIVITY)
SERIAL #2
LOOP 2
LOOP 4 (TAMPER)
5870API
ENROLL AS "RF"
ST
AY
5820L
ENROLL AS "RF"
LOOP 1
SERIAL #2
LOOP 3
AD
5821
ENROLL AS "RF"
SERIAL #2
LOOP 1
RE
LOOP 3
LOOP 1
LOOP 1
(INTERNAL
SHOCK
SENSOR
LOOP 1
(TERMINALS)
5819
ENROLL AS "RF"
SERIAL #1
LOOP 2
AR
ME
LOOPS
1-3
LOOP 3
(TERMINALS)
SERIAL #2
LOOP 1
SERIAL #1
LOOP 3
LOOP 2
(REED)
5811
ENROLL AS "RF"
LOOP 3
(TERMINALS)
LOOP 1
(TERMINALS)
5816
ENROLL AS "RF"
5809
ENROLL AS "RF"
5806/5806W3/5807
5808/5808LST/5808W3
ENROLL AS "RF"
LOOP 2
(REED)
ALTERNATE
POSITION
FOR LOOP 2
5814
ENROLL AS "RF"
LOOP 1
LOOP 1
LOOP 2
(REED)
LOOP 1
(TERMINALS)
LOOP 1
LOOP 1
LOOP 4
LOOP
1
5800SS1
E N RO L L A S " R F "
5800RL
SET HOUSE ID
LOOP 2
LOOP 2
LOOP 1
LOOP
1
ON
5800PIR-OD
ENROLL AS "RF"
5800PIR/5800PIR-COM
ENROLL AS "RF"
5877
5878
ENROLL AS "BR"
5898
ENROLL AS "RF"
5800-002-V2
5800Micra
ENROLL AS "RF"
5800CO
ENROLL AS "RF"
Notes: (1) The 5806W3 smoke detector must be used in SIA applications.
(2) Button type devices send only fault and low battery signals; no restore or check-in signals.
Supervised devices send periodic check-in signals, faults, restore and low battery signals.
Unsupervised devices send periodic check-in signals, faults, restore and low battery signals but the control does
not supervise the check-in signals.
(3) If an external sounder is required, the 5800WAVE should be used.
(4) The 5804E and 5834-4 encrypted (High-Security) devices must be activated while the system is in Go/No-Go
Test Mode. Refer to the transmitters Installation Instruction for complete details. The system will confirm the
enrollment of the encrypted device by beeping two times
(5) The 5800PIR-OD, 5800RL, 5800SS1, 5804E, 5804BD, 5804BDV, 5814, 5816TEMP, 5821, 5828/5828V, 5877,
and 5878 wireless transmitters have not been evaluated by UL/ETL
UL
The 5800RL, 5802MN, 5802MN2, 5804, 5804BD, 5804BDV, 5814, 5816TEMP, 5819, 5819S(WHS & BRS), and
5828/5828V wireless transmitters have not been evaluated by UL/ETL.
- 23 -
Configuration 1
Configuration 2
Configuration 3
Configuration 4
4112
4112
4112
4112
RF Jam
Disabled
Disabled
Disabled
Disabled
Speaker Phone
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
RF House Code
Disabled
Disabled
Disabled
Disabled
System Type
Phone Notification
Remote Phone
Enabled
Enabled
Enabled
Enabled
2 Minutes
2 Minutes
2 Minutes
2 Minutes
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Enabled
Enabled
Enabled
Non Security
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
January 1, 2014
January 1, 2014
January 1, 2014
January 1, 2014
Calendar
Enter Time
10:00AM
10:00AM
10:00AM
10:00AM
Time Zone
Eastern (EST)
Eastern (EST)
Eastern (EST)
Eastern (EST)
Yes
Yes
Yes
Yes
March
March
March
March
Start Week
Second
Second
Second
Second
End Month
November
November
November
November
First
First
First
First
End Week
Communicator
Communications Path
None
None
None
None
Disabled
Disabled
Disabled
Disabled
City ID
None
None
None
None
CS ID
None
None
None
None
Sub ID
None
None
None
None
24 Hours
24 Hours
24 Hours
24 Hours
APL
Supervision
Old Alarm Time
10 Minutes
10 Minutes
10 Minutes
10 Minutes
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
00
00
00
00
GSM Rollover
No
No
No
No
No
No
No
No
Use DHCP
Yes
Yes
Yes
Yes
NIC IP Address
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Subnet Mask
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Gateway IP Address
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Primary CS Info
Phone Type
Communicator Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Account Number
FFFF
FFFF
FFFF
FFFF
- 24 -
Program Function
Configuration 1
Configuration 2
Configuration 3
Configuration 4
Dynamic Priority
None
None
None
None
Dynamic Delay
None
None
None
None
Report Alarms
Enabled
Enabled
Enabled
Enabled
Report Troubles
Enabled
Enabled
Enabled
Enabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Enabled
Enabled
Enabled
Enabled
Report All
Secondary CS Info
Phone Type
None
None
None
None
Communicator Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Account Number
FFFF
FFFF
FFFF
FFFF
Dynamic Priority
None
None
None
None
Dynamic Delay
Report All
Report Alarms
None
None
None
None
Enabled
Enabled
Enabled
Enabled
Report Troubles
Enabled
Enabled
Enabled
Enabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Enabled
Enabled
Enabled
Enabled
Follow Me Phone 1
Phone Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Report Alarms
Disabled
Disabled
Disabled
Disabled
Report Troubles
Disabled
Disabled
Disabled
Disabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Disabled
Disabled
Disabled
Disabled
Report All
Follow Me Phone 2
Phone Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Report All
Report Alarms
Disabled
Disabled
Disabled
Disabled
Report Troubles
Disabled
Disabled
Disabled
Disabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Disabled
Disabled
Disabled
Disabled
Arm Away
Enabled
Enabled
Enabled
Enabled
Arm Stay
Enabled
Enabled
Enabled
Enabled
Disarm
Enabled
Enabled
Enabled
Enabled
Exit Error
Enabled
Enabled
Enabled
Enabled
Report Selection
Recent Closing
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Trouble
Enabled
Enabled
Enabled
Enabled
Trouble Restore
Enabled
Enabled
Enabled
Enabled
Alarm Restore
Enabled
Enabled
Enabled
Enabled
Alarm Cancel
Enabled
Enabled
Enabled
Enabled
Test
Enabled
Enabled
Enabled
Enabled
Test Restore
Enabled
Enabled
Enabled
Enabled
Bypass
Enabled
Enabled
Enabled
Enabled
Bypass Restore
Enabled
Enabled
Enabled
Enabled
AC Loss
Enabled
Enabled
Enabled
Enabled
AC Loss Restore
Enabled
Enabled
Enabled
Enabled
- 25 -
Program Function
Configuration 1
Configuration 2
Configuration 3
Configuration 4
Low Battery
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
RF Low Battery
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Blank
Blank
Blank
Blank
Options
PBX
Call Wait Cancel
Blank
Blank
Blank
Blank
2 Reports
2 Reports
2 Reports
2 Reports
30 Sec.
30 Sec.
30 Sec.
30 Sec.
6 Hrs
12 Hrs
12 Hrs
12 Hrs
Report Frequency
Never
30 Days
Never
Never
Yes
Yes
Yes
Yes
Abort Window
Downloader
Phone Answer
Ans. Machine Defeat
Yes
Yes
Yes
Yes
Slow
Slow
Slow
Slow
Callback Number
Blank
Blank
Blank
Blank
Flexible Callback
No
No
No
No
Ring Counter
Number
Sounder
Burglary Alarm Sound
Yes
Yes
Yes
Yes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
Arm Confirm
System Settings
RF Keyfob
RF Keyfob
RF Keyfob
RF Keyfob
Entry Delay 1
30 Seconds
30 Seconds
30 Seconds
30 Seconds
Entry Delay 2
30 Seconds
30 Seconds
30 Seconds
30 Seconds
Exit Delay
60 Seconds
60 Seconds
60 Seconds
60 Seconds
Backlight Timeout
No
No
No
No
Quick Arm
Yes
Yes
Yes
Yes
Quick Exit
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Force Bypass
No
No
No
No
Exit Warning
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Disabled
Disabled
Disabled
Disabled
Power-Up In Previous
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
None
None
None
None
Cross Zone 1
Disabled
Disabled
Disabled
Disabled
Cross Zone 2
Z-Wave
Disabled
Disabled
Disabled
Disabled
Z-Wave
Temperature
Enabled
Enabled
Enabled
Enabled
Fahrenheit
Fahrenheit
Fahrenheit
Fahrenheit
- 26 -
Configuration 1
Configuration 2
Configuration 3
Configuration 4
4112
4112
4112
4112
System Type
RF Jam
Disabled
Disabled
Disabled
Disabled
Speaker Phone
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
RF House Code
Phone Notification
Disabled
Disabled
Disabled
Disabled
Remote Phone
Enabled
Enabled
Enabled
Enabled
2 Minutes
2 Minutes
2 Minutes
2 Minutes
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Enabled
Enabled
Enabled
Enabled
Non Security
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Calendar
January 1, 2014
January 1, 2014
January 1, 2014
January 1, 2014
Enter Time
10:00AM
10:00AM
10:00AM
10:00AM
Time Zone
Eastern (EST)
Eastern (EST)
Eastern (EST)
Eastern (EST)
Yes
Yes
Yes
Yes
March
March
March
March
Second
Second
Second
Second
End Month
November
November
November
November
First
First
First
First
End Week
Communicator
Communications Path
None
None
None
None
Disabled
Disabled
Disabled
Disabled
City ID
None
None
None
None
CS ID
None
None
None
None
Sub ID
None
None
None
None
24 Hours
24 Hours
24 Hours
24 Hours
10 Minutes
APL
Supervision
Old Alarm Time
10 Minutes
10 Minutes
10 Minutes
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
00
00
00
00
No
No
No
No
No
No
No
No
Use DHCP
Yes
Yes
Yes
Yes
NIC IP Address
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Subnet Mask
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Gateway IP Address
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Reporter
Primary CS Info
Phone Type
Communicator Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
- 27 -
Program Function
Account Number
Configuration 1
Configuration 2
Configuration 3
Configuration 4
FFFF
FFFF
FFFF
FFFF
Dynamic Priority
None
None
None
None
Dynamic Delay
None
None
None
None
Report Alarms
Enabled
Enabled
Enabled
Enabled
Report Troubles
Enabled
Enabled
Enabled
Enabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Enabled
Enabled
Enabled
Enabled
Phone Type
None
None
None
None
Communicator Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Account Number
FFFF
FFFF
FFFF
FFFF
Dynamic Priority
None
None
None
None
Report All
Secondary CS Info
Dynamic Delay
Report All
Report Alarms
None
None
None
None
Enabled
Enabled
Enabled
Enabled
Report Troubles
Enabled
Enabled
Enabled
Enabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Enabled
Enabled
Enabled
Enabled
Follow Me Phone 1
Phone Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Report Alarms
Disabled
Disabled
Disabled
Disabled
Report Troubles
Disabled
Disabled
Disabled
Disabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Disabled
Disabled
Disabled
Disabled
Report All
Follow Me Phone 2
Phone Type
None
None
None
None
Phone Number
Blank
Blank
Blank
Blank
Report All
Report Alarms
Disabled
Disabled
Disabled
Disabled
Report Troubles
Disabled
Disabled
Disabled
Disabled
Report Open/Close
Disabled
Disabled
Disabled
Disabled
Report Tests
Disabled
Disabled
Disabled
Disabled
Arm Away
Enabled
Enabled
Enabled
Enabled
Arm Stay
Enabled
Enabled
Enabled
Enabled
Disarm
Enabled
Enabled
Enabled
Enabled
Exit Error
Enabled
Enabled
Enabled
Enabled
Report Selection
Recent Closing
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Trouble
Enabled
Enabled
Enabled
Enabled
Trouble Restore
Enabled
Enabled
Enabled
Enabled
Alarm Restore
Enabled
Enabled
Enabled
Enabled
Alarm Cancel
Enabled
Enabled
Enabled
Enabled
Test
Enabled
Enabled
Enabled
Enabled
Test Restore
Enabled
Enabled
Enabled
Enabled
Bypass
Enabled
Enabled
Enabled
Enabled
Bypass Restore
Enabled
Enabled
Enabled
Enabled
AC Loss
Enabled
Enabled
Enabled
Enabled
- 28 -
Program Function
Configuration 1
Configuration 2
Configuration 3
Configuration 4
AC Loss Restore
Enabled
Enabled
Enabled
Enabled
Low Battery
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
RF Low Battery
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Blank
Blank
Blank
Blank
Options
PBX
Call Wait Cancel
Blank
Blank
Blank
Blank
2 Reports
2 Reports
2 Reports
2 Reports
30 Sec.
30 Sec.
30 Sec.
30 Sec.
6 Hrs
12 Hrs
12 Hrs
12 Hrs
Report Frequency
Never
30 Days
Never
Never
Yes
Yes
Yes
Yes
Abort Window
Downloader
Phone Answer
Ans. Machine Defeat
Yes
Yes
Yes
Yes
Slow
Slow
Slow
Slow
Callback Number
Blank
Blank
Blank
Blank
Flexible Callback
No
No
No
No
Ring Counter
Number
Sounder
Burglary Alarm Sound
Yes
Yes
Yes
Yes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
4 Minutes
Arm Confirm
RF Keyfob
RF Keyfob
RF Keyfob
RF Keyfob
Entry Delay 1
30 Seconds
30 Seconds
30 Seconds
30 Seconds
Entry Delay 2
30 Seconds
30 Seconds
30 Seconds
30 Seconds
Exit Delay
60 Seconds
System Settings
60 Seconds
60 Seconds
60 Seconds
Backlight Timeout
No
No
No
No
Quick Arm
Yes
Yes
Yes
Yes
Quick Exit
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Force Bypass
No
No
No
No
Exit Warning
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Disabled
Disabled
Disabled
Disabled
Power-Up In Previous
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
None
None
None
None
Cross Zone 1
Disabled
Disabled
Disabled
Disabled
Cross Zone 2
Z-Wave
Disabled
Disabled
Disabled
Disabled
Z-Wave
Enabled
Enabled
Enabled
Enabled
Fahrenheit
Fahrenheit
Fahrenheit
Fahrenheit
Temperature
- 29 -
- Notes -
- 30 -
- 31 -
EDGE
CONNECTOR
(L5100ZWAVE)
PHONE
(L5201/L5201CN ONLY)
P/N 300-03864-1/LYNXRCHKIT-SC
P/N 300-03866/LYNXRCHKIT-SHA
EGND
EARTH GROUND
STANDARD CAPACITY
BATTERY CONNECTOR
TAMPER
SWITCH
COMMUNICATIONS MODULE
RECEPTACLE
ZONES
2K
OHM
EOLR
HARD
WIRED
ZONE
GND
WARNING
Be sure to observe
polarity when
connecting the
power supply to
the terminal strip.
IMPORTANT
02 - 48
ZT16
CIRCUIT
(ZONE)
30 seconds
CONTROL UNIT
DELAY-SEC
5806W3
5201-100-SOC-V0
10 seconds
SMOKE DETECTOR
MODEL
DELAY-SEC
EDGE
CONNECTOR
(L5100-WiFi)
POWER SUPPLY
CONNECTOR
300-04705V1 or 300-04065V1
(300-04063V1 or 300-04064V1
CANADA)
POWER SUPPLY 9V, 2.7A
POWER
GND
RING
TIP
RING
TIP
TIP
UL INSTALLATIONS
THE MINIMUM WIRE
SIZE USED FOR
TELEPHONE
INSTALLATIONS
MUST BE #26 GAGE
RING
PREMISES
TELEPHONE
H/S T
INCOMING
PHONE LINE
HWZ1
WARNING
TO PREVENT RISK OF
SHOCK, DISCONNECT
TELEPHONE LINE
AT TELECOM JACK
BEFORE SERVICING
THIS UNIT
H/S R
+9VDC
800-199766
800-19976 12/14 Rev. B