Professional Documents
Culture Documents
1.3 Supporting Resources To The Guidelines: 1.3.1 Published Documents
1.3 Supporting Resources To The Guidelines: 1.3.1 Published Documents
Published documents
These Guidelines are accompanied by separate texts that provide background information
substantiating the derivation of the Guidelines and providing guidance on good practice
towards their effective implementation. These are available as published texts, for
download from the WHO web site and on CD-ROM. Reference details are provided in
Annex 1.
1.3.2
Capacity-building networks
Introduction
(Chapter 1)
The basic and essential requirement to ensure the safety of drinking-water is the
FRAMEWORK FOR SAFE DRINKING-WATER
SUPPORTING
1)
2)
3)
2)
3)
4)
targets may be the basis for evaluation of results through quantitative risk
assessment models. In these cases, health outcomes are estimated based on
information concerning high-dose exposure and dose- response relationships.
The results may be employed directly as a basis for the specification of water
quality targets or provide the basis for development of the other types of healthbased targets. Health outcome targets based on information on the impact of
tested interventions on the health of real populations are ideal, but rarely
available. More common are health outcome targets based on defined levels of
tolerable risk, either absolute or fractions of total disease burden, usually based
on toxicological studies in experimental animals and occasionally based on
epidemiological evidence.
Water quality targets: Water quality targets are established for individual drinking-water constituents that represent a health risk from long-term exposure and
where fluctuations in concentration are small. They are typically expressed as
guideline values (concentrations) of the substances or chemicals of concern.
Performance targets: Performance targets are employed for constituents where
short-term exposure represents a public health risk or where large fluctuations in
numbers or concentration can occur over short periods with significant health
implications. These are typically technology based and expressed in terms of required reductions of the substance of concern or effectiveness in preventing contamination.
Specified technology targets: National regulatory agencies may establish other
recommendations for specific actions for smaller municipal, community and
household drinking-water supplies. Such targets may identify specific
permissible devices or processes for given situations and/or for generic
drinking-water system types.
It is important that health-based targets are realistic under local operating conditions
and are set to protect and improve public health. Health-based targets underpin the
development of WSPs, provide information with which to evaluate the adequacy of
existing installations and assist in identifying the level and type of inspection and
analytical verifications that are appropriate.
Most countries apply several types of targets for different types of supplies and
different contaminants. In order to ensure that they are relevant and supportive,
representative scenarios should be developed, including description of assumptions,
management options, control measures and indicator systems for performance tracking
and verification, where appropriate. These should be supported by general guidance
addressing the identification of national, regional or local priorities and progressive
implementation, thereby helping to ensure that best use is made of limited resources.
Health-based targets are considered in more detail in chapter 3.
For guidance on how to prioritize constituents based on greatest risk to public
health, the reader should refer to section 2.5 and the supporting document Chemical
safety of drinking-water (Annex 1).
protection and process control to ensure that numbers of pathogens and concentrations of
chemicals present a negligible risk to public health and that water is acceptable to
consumers. The management plans developed by water suppliers are WSPs. A WSP
comprises system assessment and design, operational monitoring and management plans,
including documentation and communication. The elements of a WSP build on the
multiple-barrier principle, the principles of hazard analysis and critical control points and
other systematic management approaches. The plans should address all aspects of the
drinking-water supply and focus on the control of abstraction, treatment and delivery of
drinking-water.
Many drinking-water supplies provide adequate safe drinking-water in the absence
of formalized WSPs. Major benefits of developing and implementing a WSP for these
supplies include the systematic and detailed assessment and prioritization of hazards, the
operational monitoring of barriers or control measures and improved documentation. In
addition, a WSP provides for an organized and structured system to minimize the chance
of failure through oversight or lapse of management and for contingency plans to respond
to system failures or unforeseen events that may have an impact on water quality, such as
increasing severe droughts, heavy rainfall or flood events.
2.2.1
the interim, the WSP should be used to assist in making every effort to supply water of
the highest achievable quality. Where a significant risk to public health exists, additional
measures may be appropriate, including notification, information on compensatory
options (e.g. boiling or disinfection at the point of use) and availability of alternative and
emergency supplies when necessary.
System assessment and design are considered in more detail in section 4.1 (see also
the supporting document Upgrading water treatment plants; Annex 1).
2.2.2
Operational monitoring
2.2.3
where a loss of control of the system may occur. The management plan should also
outline procedures and other supporting programmes required to ensure optimal operation
of the drinking-water system.
As the management of some aspects of the drinking-water system often falls outside
the responsibility of a single agency, it is essential that the roles, accountabilities and
responsibilities of the various agencies involved be defined in order to coordinate their
planning and management. Appropriate mechanisms and documentation should therefore
be established for ensuring stakeholder involvement and commitment. This may include
establishing working groups, committees or task forces, with appropriate representatives,
and developing partnership agreements, including, for example, signed memoranda of
understanding (see also section 1.2).
Documentation of all aspects of drinking-water quality management is essential.
Documents should describe activities that are undertaken and how procedures are
performed. They should also include detailed information on:
Documentation and record systems should be kept as simple and focused as possible. The level of detail in the documentation of procedures should be sufficient to
provide assurance of operational control when coupled with suitably qualified and
competent operators.
Mechanisms should be established to periodically review and, where necessary,
revise documents to reflect changing circumstances. Documents should be assembled in a
manner that will enable any necessary modifications to be made easily. A document
control system should be developed to ensure that current versions are in use and obsolete
documents are discarded.
Appropriate documentation and reporting of incidents or emergencies should also be
established. The organization should learn as much as possible from an incident to
improve preparedness and planning for future events. Review of an incident may indicate
necessary amendments to existing protocols.
Effective communication to increase community awareness and knowledge of
drinking-water quality issues and the various areas of responsibility helps consumers to
understand and contribute to decisions about the service provided by a drinking- water
supplier or land use constraints imposed in catchment areas. It can encourage the
2
4
2.3 Surveillance
Surveillance agencies are responsible for an independent (external) and periodic review
of all aspects of quality and public health safety and should have the power to investigate
and to compel action to respond to and rectify incidents of contamination-caused
outbreaks of waterborne disease or other threats to public health. The act of surveillance
includes identifying potential drinking-water contamination and waterborne illness events
and, more proactively, assessing compliance with WSPs and promoting improvement of
the quality, quantity, accessibility, coverage, affordability and continuity of drinkingwater supplies.
Surveillance of drinking-water requires a systematic programme of data collection
and surveys that may include auditing of WSPs, analysis, sanitary inspection and
institutional and community aspects. It should cover the whole of the drinking-water
system, including sources and activities in the catchment, transmission infrastructure,
whether piped or unpiped, treatment plants, storage reservoirs and distribution systems.
As incremental improvement and prioritizing action in systems presenting greatest
overall risk to public health are important, there are advantages to adopting a grading
scheme for the relative safety of drinking-water supplies (see chapter 4). More
sophisticated grading schemes may be of particular use in community supplies where the
frequency of testing is low and exclusive reliance on analytical results is particularly
inappropriate. Such schemes will typically take account of both analytical findings and
sanitary inspection through approaches such as those presented in section 4.1.2.
The role of surveillance is discussed in section 1.2.1 and chapter 5.
2.4.1
For microbial water quality, verification is likely to be based on the analysis of faecal
25
indicator microorganisms, with the organism of choice being Escherichia coli or, alternatively, thermotolerant coliforms (see sections 4.3.1, 7.4 and 11.6). Monitoring of
specific pathogens may be included on very limited occasions to verify that an outbreak
was waterborne or that a WSP has been effective. Escherichia coli provides conclusive
evidence of recent faecal pollution and should not be present in drinking- water. Under
certain circumstances, additional indicators, such as bacteriophages or bacterial spores,
may be used.
However, water quality can vary rapidly, and all systems are at risk of occasional
failure. For example, rainfall can greatly increase the levels of microbial contamination in
source waters, and waterborne outbreaks often occur following rainfall. Results of
analytical testing must be interpreted taking this into account.
2.4.2
Assessment of the adequacy of the chemical quality of drinking-water relies on comparison of the results of water quality analysis with guideline values. These Guidelines
provide guideline values for many more chemical contaminants than will actually affect
any particular water supply, so judicious choices for monitoring and surveillance should
be made prior to initiating an analytical chemical assessment.
For additives (i.e. chemicals deriving primarily from materials and chemicals used
in the production and distribution of drinking-water), emphasis is placed on the direct
control of the quality of these commercial products. In controlling drinking-water
additives, testing procedures typically assess whether the product meets the specifications
(see section 8.5.4).
As indicated in chapter 1, most chemicals are of concern only following longterm
exposure; however, some hazardous chemicals that occur in drinking-water are of
concern because of effects arising from sequences of exposures over a short period.
Where the concentration of the chemical of interest (e.g. nitrate/nitrite, which is associated with methaemoglobinaemia in bottle-fed infants) varies widely, even a series of
analytical results may fail to fully identify and describe the public health risk. In
controlling such hazards, attention must be given to both knowledge of causal factors
such as fertilizer use in agriculture and trends in detected concentrations, as these will
indicate whether a significant problem may arise in the future. Other hazards may arise
intermittently, often associated with seasonal activity or seasonal conditions. One
example is the occurrence of blooms of toxic cyanobacteria in surface water.
2
6
A guideline value represents the concentration of a constituent that does not exceed
tolerable risk to the health of the consumer over a lifetime of consumption. Guideline
values for some chemical contaminants (e.g. lead, nitrate) are set to be protective for
susceptible subpopulations. These guideline values are also protective of the general
population over a lifetime.
It is important that recommended guideline values are scientifically justified,
practical and feasible to implement as well as protective of public health. Guideline
values are not normally set at concentrations lower than the detection limits achievable
under routine laboratory operating conditions. Moreover, some guideline values are
established taking into account available techniques for controlling, removing or reducing
the concentration of the contaminant to the desired level. In some instances, therefore,
provisional guideline values have been set for contaminants for which calculated healthbased values are not practically achievable.
Many microbial and chemical constituents of drinkingwater can potentially cause adverse human health effects.
The detection of these constituents in both raw water and
water delivered to consumers is often slow, complex and
costly, which limits early warning capability and
affordability. Reliance on water quality determination
alone is insufficient to protect public health. As it is neither
physically nor economically feasible to test for all
drinking-water quality parameters, the use of monitoring
effort and resources should be carefully planned and
directed at significant or key characteristics.
27