Optimising Productivity in Foundry Optimising Productivity in Foundry
Optimising Productivity in Foundry Optimising Productivity in Foundry
IN FOUNDRY
(INDIAN FOUNDRY CONGRESS 2014 AHMEDABAD)
Laxman Sundar, Neosym Industry Ltd., Pune
Email : [email protected]
Past Legacies
FOUNDRY IS A COMPLEX PROCESS OF MANY SUB-PROCESSES. THE INTER PROCESS CO-ORDINATION WAS MISSING. THERE IS LACK OF CONCEPT OF
TEAM WORK AND INTERNAL CUSTOMER.
GENERAL TENDENCY IS TO EXPLAIN AWAY THE PROBLEMS. ANALYSIS ENDS
IN FIXING THE BLAME RATHER THAN PROBLEM.
TRADITIONAL APPROACH IS THE ROOT CAUSE OF RANDOM FAILURES AS THE
PROCESSES HAD NO PROACTIVE APPROACH OF PREDICT AND PREVENT .
IT WONT BE WRONG IF WE SAY GOOD RESULTS WERE BY LUCK IN MANY
CASES AND NOT BY TEAM WORK IN ALL PROCESSES COMPLIMENTORY TO A
COMMON GOAL.
OFF LINE AND SUPPORT ACTIVITIES WERE UNAWARE OF RESULTS OF THEIR
INPUTS IN MAIN STRAM PRODUCTION PROCESS.
2
Enemies of productivity
1. Equipment Failures/break downs; poor maintenance reliability
2. Set up and adjustment losses; poor operational reliability
3. Idling and minor stoppages; unplanned deviations in Operation
4. Reduced speed; forced deterioration and natural deterioration
5. Quality defects; design, process variations, poor reliability in
support activities.
6. Lack of team work, domain incompetence result in many
compromises in operations.
SOURCES OF UNRELIABILITY:
A)Operations 30-50%:
- poorly defined operating procedures and training
-ineffective cross functional team working
-lack of measures and targets
-inconsistent operations
-lack of training
B) Assets 30-40%:
-Inaccurate initial specifications
-poor design for maintenance and operations
-change of use and modifications
-Aging or inadequate assets
C) Maintenance 10-30%:
-no or inadequate strategy
-inadequate monitoring/knowledge of conditions
-poor/ no rebuild specifications
- Lack of technical skills / training
New Challenges
Automation demands and helps machine users to trace, track and
handle random component/process parameter failures which
happen in foundry process/sub processes with infinite variables
New operational strategies to maintain and operate the highly
automated assets for better utilization
Change in attitude process approach and team work
Sympathy
Apathy
Empathy
5
-Resource Management
* Human Resources, Infrastructure, Work Environment
- Product Realization
* Customer, Design, Purchasing, Operations, Calibration
Stage 2: (Infrastructure)
-Select robust equipment with proven track record.
-Select automation to meet immediate envisaged quality/quantity
needs and likely expansions in future.
-Evolve maintenance plan with risk evaluation.
-Keep spares and assemblies to cover likely risks.
-Ensure machine capabilities to meet process requirements
-Ensure facilities to detect deviations in parameters and on line
corrections.
-Erection and commissioning is the best opportunity for training.
-Layouts to ensure adequate facilities to implement modern tools,
safety, lean manufacturing etc, down the stream.
-Scope to reduce maintenance activities by up gradation of design.
11
13
14
+
COST OF REACTIVE APPROACH
15
Bench Marking
Generally, this is a process of comparing our own performance
with the best in Industry.
Dimensions typically measured are Quality, Asset utilization, Time
and Cost.
Continuous improvements from self learning is the best method
to adopt rather than global bench marking. No two foundries have
same set up, skill levels and product portfolio.
We can create a performance tracking sheet on Time scale to
measure our own performance and effectiveness of actions on
day today basis.
Follow Select/measure/analyze/improve/control approach
Bench marking has to start from within and the bench marks
within can be improved from month on month. These bench
marks can be dynamic, like best achievements of one month can
be bench mark for next. They help us to go to perfection in given 17
set up.
B)Speed losses:
3) Idling and minor stoppages -due to abnormal operation of line
components and lack of co-ordination
4) Reduced speed -due to discrepancies between design and actual speed
of equipment or deration in equipment
C) Defect/Quality Losses:
5) Process defects -due to quality parameters going out of control
6) Reduced yield critical design of process/ tooling/methoding etc, unfit
in given infrastructure.
Sense, predict, evaluate, correct on line and improve, without
compromises. Condition Monitoring deals with on line continuous
monitoring and corrections without unnecessary over doing work.
18
OPTIMIZING APPROACH
-Continuous improved internal bench marking. Do the basics well
and with proactive approach.
-Total understanding of facility by total team with limitations in
operations, maintenance, quality and design.
-Compliance to scheduled work should improve and disaster
management reduce. Compliance of Scheduled work measurement
can be one criteria to improve efficiency.
-Create capacity targets in as is condition, process wise and product
wise as reference. This should be theory based without derations.
Does not matter if your over all foundry yield works out less than
50%. This can be upgraded with improvement actions identified
every month.
- Find out the constraint process in given volumes, products etc.
-Best we can do is exploit the constraint to 100%. All other processes
have to align with even at the cost of under utilization.
19
20
we are today.
-Predictive, preventive and reactive maintenance, break up of time spent on
equipments process wise.
-Monitor number of deviations in all processes every day, like maintenance
calls, corrections in process parameters in all processes etc.
-Understand and Establish relationship between inputs and out puts for
effectiveness and track for a reasonable period or cycles. The side effects of
actions need to be understood and co related.
-Each Process out put can be treated as product and inputs raw materials
consumptions (even in weights, numbers is Ok, need not be only in Rs.) per
unit of out put can be monitored as measurement index.
-Out put of one process can be input of other process.
22
Implementation stages
-FIRST DECIDE THE CONSTRAINT PROCESS AND CONSTRAINT NEEDS TO BE
EXPLOITED.
-GENERALLY, FOUNDRIES ARE DESIGNED TO HAVE CAPACITIES TELESCOPICALLY
HIGHER AS WE GO AWAY FROM MELTING TO AVOID BOTTLENECKING IN FLOW.
-TARGET EXPLOITATION OF MELTING CAPACITY SHOULD BE A COMMON GOAL FOR
ALL PROCESS OWNERS, AS IT IS THE NESCENT PRODUCTION IN A FOUNDRY.
CASTINGS GET CONVERTED IN GROSS OR NET GOOD LATER.
-THE CONSUMPTION OF LIQUID METAL DRIVES ALL SUB PROCESSES TO FEED CORES,
SAND, MOLDS, EVACUATION OF CASTINGS THROUGH UP TO SALES, IN TIME.
-ALL OTHER PROCESSES MAY RUN INEFFICIENTLY AS THE CAPACITIES COULD BE
HIGHER, PRODUCT MIX COULD BE FAVOURABLE ETC.
-THE THEORITICAL CAPACITY OF MELTING AS DEMONSTRATED BY SUPPLIER SHOULD
BE THE TARGET. GENERALLY, WE SETTLE DOWN AT WHATEVER WE MAKE AND USE
THAT AS THE REFERENCE FOR EXHIBITING THE PROGRESS.
23
24
25
A
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
15
2
630
63
16.5
26.2
465
3
660
66
25.0
37.9
410
4
660
66
19.3
29.3
467
1F
off
1F
off
1F
off
7
960
192
47.5
24.7
723
8
720
144
34.8
24.2
546
9
10
11
14
720 780 720 420
144 156 144 84
44.4 42.3 37.2 19.3
30.8 27.1 25.8 23.0
498 568 534 324
15
900
180
54.4
30.2
628
16
480
96
24.7
25.7
357
17
660
132
36.6
27.7
477
18
660
132
39.3
29.8
463
21
720
144
42.7
29.7
506
22
840
168
54.7
32.5
567
23
780
156
48.1
30.8
540
24
780
156
46.8
30.0
546
25
780
156
49.2
31.5
534
26
540
108
36.0
33.4
360
28
540
108
32.3
29.9
379
29
30
Total Frequency
600 840 16050
120 168 3210
38.1 42.3 863.6
31.8 25.2 26.9
409 628 11428
707
354
Maintenance Delays
10
11
12
13
14
1
660
132
32.1
24.3
500
40
31
60
60
34
20
29
49
41
31
60
145
150
212
151
170
132
60
45
32
40
52
25
55
68
43
50
61
45
30
33
0
0
0
0
40
0
0
0
0
1
31
60
191
0
275
151
33
4837
3054
33
0
0
994
0
1
0
0
23
0
30
0
30
0
1
27
0
0
0
0
19
131 290 142 172 214 186 290 230 251 295 158 152 193
68 194 88 130 140 152 195 171 167 175 128 115 136
25
60
35
30
123
50
80
55
30
27
0
0
0
0
1189
458
414
279 571 325 447 422 426 535 487 486 504 319 359 389
609
62
10199
62
417
40
50
50
45
55
30
30
40
40
30
50
60
30
40
20
20
20
23
2
45
55
30
30
40
40
30
50
60
30
40
20
20
20
895
133
1028
324 626 355 477 462 506 565 537 546 534 359 379 409
629
11418
47
113
50
50
20
45
50
50
20
45
50
50
40
81
121
498
568
535
40
40
52
92
87
35
70
90
45
25
23
ACTIONS
A7
B15
A9
27
Maintenance Delays
Furance trip ON GLD, metal piece
Furnace water low pressure / high
temparature trip
vibro charger Problem
Magnet Crane CT Problem
Furance charger supply incomer trip
8T magnet Hot
Pouring stopper rod sensor not sensing
Furnace cylinder mounting welding break
Subtotal Maintenance Delays
PROCESS DELAY
Metal Delay, capapcity constraint
Metal dispensation
Low temp. metal back
Laddle suspension jam
Metal Delay due Metal leak/GLD
Pouring line stop/Metal Holding
Metal return due to metal spillage on box
F/C problem metal shifting to furnace B
Furnace Hood Jam
Furnace A trip Srap piece onWCL
Furance Problem metal spillage F/C A.
Metal composition delays
furance jam
furance holding
Pouring stopper rod /nozzle Jam
Pouring basin checking for slag
7
480
96
22
###
369
8
760
152
38
24.8
571
9
700
140
33
23.8
533
10
600
120
23.7
19.7
482
11
735
147
35.1
23.9
560
12
700
140
41
29.2
496
13
770
154
33.2
21.6
604
14
943
189
50
26.5
693
15
751
150
40
26.4
553
16
810
162
41.1
25.4
605
18
866
173
50.2
29.0
615
19
919
184
46
25.0
689
20
480
96
34.4
35.8
308
21
840
168
43.2
25.7
624
22
840
168
51.1
30.4
584
23
920
184
40
21.6
722
25
500
100
27
27.0
365
26
660
132
35.8
27.1
481
27
806
161
44
27.0
588
28
768
154
48
31.4
527
29
838
168
21
12.4
734
30
768
154
50
32.5
518
40
25
10
0
40
60
60
25
10
173 302 222 145 285 334 335 279 196 238 211 220 225
80 135 119 84 130 135 120 180 145 138 179 164 25
28
25
21
265
49
30
85
70
237
60
30
50
62
27
25
64
60
74
55
40
39
46
78
36
61
98
330 142
6
45
40
25
55
100
30
30
25
110
70
40
90
42
15
15
40
120
50
138
323 522 426 379 507 496 583 633 496 490 541 608 289
434
45
65
105
60
50
30
30
45
65
105
60
50
30
30
368 587 531 479 557 496 603 693 546 600 571 688 309
464
20
60
50
50
30
80
20
60
12
45
20
60
50
50
30
80
20
72
45
150
150
60
50
60
30
50
Total Freq
16454
3291
847
25.7
12219
0
0
0
0
40
0
0
25
10
60
135
0
1
0
0
1
1
1
4
5094
2325
279
0
0
1763
36
0
0
0
6
100
0
890
280
22
19
9
0
0
22
1
0
0
0
1
4
0
15
4
10
30
35
45
40
70
45
885
12
225
45 28
1122
19
1
Date
Tot Fre
7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 25 26 27 28 29 30 al q
ACTIONS
A
3 Cleaned the metal on
Track
1) Forward limit switch
setting adjusted . 2)
A New braket fabricated
8 & welding done
29
2
3
4
Date
Production time
Target LMT 6MW Power
Actual LMT achieved
Utilization %
Time Lost in minutes
KWH/ T of Liquid metal - Melting
KWH/ T of Liquid metal - Auxiliary
Maintenance Delays
Furance trip ON GLD, metal piece
Furnace water low pressure / high
temparature trip
vibro charger problem
Magnet Crane - CT Problem
5
6
9
B
1
2
3
4
5
6
8
9
A
1
10
11
12
13
14
15
16
18
C
1
0.0
2
768
153.6
50.0
32.5
518
3
934
186.8
43.6
23.4
716
4
740
148.0
43.1
29.1
525
5
644
128.8
41.3
32.0
438
6
300
60.0
0.0
0.0
300
0.0
0.0
0.0
87
87
233
179
217
189
201
177
169
119
9
930
186.0
59.0
31.7
635
10
950
190.0
63.9
33.6
631
11
0.0
12
960
192.0
74.8
39.0
586
13
960
192.0
68.0
35.4
620
14
15
0.0
0.0
0
16
820
164.0
60.7
37.0
517
17
18
870
174.0
74.5
42.8
497
115
109
282
155
30
228
210
272
240
206
200
251
201
36
10
21
30
25
60
264
80
44
10
342
472
680
429
40
30
15
347
177
57
105
105
45
60
571
614
586
617
511
497
10
40
30
15
10
512
710
444
429
571
624
586
617
511
497
Total
8876
1775.2
578.9
32.6
5982
702
326
Frequenc
y
11
27.0
12.0
1.0
0
0
0
0
0
0
0
95
0
1
0
95
0
2
2174
1779
0
66
0
0
10
10
0
2
0
0
10
51
0
2
0
0
25
0
1159
135
0
60
5319
0
1
0
8
3
0
1
28
95
0
4
0
95
28
550130
23
S.NO.
A
1
2
3
4
5
6
7
9
B
1
2
3
4
5
6
7
8
9
10
11
13
15
16
17
18
C
MONTH
Production time
Target LMT at rated Power
Actual LMT achieved
Utilization %
Time Lost in minutes
KWH/ T of Liquid metal - Melting
KWH/ T of Liquid metal - Auxiliary
Maintenance Delays
Furance trip ON GLD, metal piece
Furnace water low pressure / high temparature trip
vibro charger problem
Magnet Crane CT Problem
Furance charger supply incomer trip
8T magnet hot
SERT stopper rod sensor not sensing
Furnace cylinder mounting welding break
Subtotal Maintenance Delays
PROCESS DELAY
Metal Delay, capapcity constraint
Metal dispensation
Low temp. metal back
Laddle suspension jam
Metal Delay due Metal leak/GLD
Pouring line stop/metal holding
Metal return due to metal spillage on box
F/C problem metal shifting to furnace B
Furnace Hood Jam
Furnace A trip Srap piece onWCL
Furance Problem metal spillage F/C A.
Metal composition delay
furance holding
Pouring stopper rod /nozzle Jam
Pouring basin checking
Sintering delay
1
16050
3210
864
26.9
11428
707
354
2
16454
3291
847
25.7
12219
723
358
3
8876
1775
579
32.6
5982
702
326
60
0
0
0
0
40
31
60
191
0
0
40
0
0
25
10
60
135
0
0
0
0
0
95
0
0
95
4837
3054
33
0
0
994
0
0
30
0
0
0
1189
62
5094
2325
279
0
0
1763
36
0
0
6
100
0
890
280
2174
1779
0
66
0
0
10
51
0
0
0
25
1159
135
0
60
10199
10741
5319
895
133
885
12
225
1122
11998
95
0
0
95
5501
1028
11418
11
12
Year
31
S.NO.
A
1
2
3
4
5
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
MONTH
Production time
Target LMT at rated Power
Actual LMT achieved
Utilization %
Time Lost in minutes
KWH/ T of Liquid metal - Melting
KWH/ T of Liquid metal - Auxiliary
Maintenance Delays
Furance trip ON GLD, metal piece
vibro charger problem
8T magnet hot
SERT stopper rod sensor not sensing
Furnace cylinder mounting welding break
Subtotal Maintenance Delays
PROCESS DELAY
Metal Delay, capapcity constraint
Metal dispensation
Low temp. metal back
Laddle suspension jam
Pouring line stop/metal holding
Metal return due to metal spillage on box
F/C problem metal shifting to furnace B
Furnace Hood Jam
Furnace A trip Srap piece onWCL
Furance Problem metal spillage F/C A.
Metal composition delay
furance holding
Pouring stopper rod /nozzle Jam
Pouring basin checking
Sintering delay
1
2
3
16050 16454 8876
3210 3291 1775
864
847
645
26.9 25.7 36.33
11428 12219 5982
707
723
680
354
358
263
60
0
40
31
60
191
0
40
25
10
60
135
0
0
95
0
0
95
4837
3054
33
0
994
0
0
30
0
0
0
1189
62
5094
2325
279
0
1763
36
0
0
6
100
0
890
280
2174
1779
0
66
0
10
51
0
0
0
25
1159
135
0
60
11 12
Year
32
MONTH
Other Dealys
16
Lunch
895
885
95
17
133
12
18
Plasma trials
225
1028 1122
95
5 6 7 8 9 10 11 12
Year
ACTIONS
B13
A5
A2
A3
A4
33
Date
Production time
Target of mould
Actual moulds
poured
Utilization %
11
15 16
17
18
21
22
23
28
Freq
uenc
30 Total y
660
935
893 935 935 1360 1020 1020 10201275 680 935 935 1020 1190 1105 765 1190 22780
165
109 81
132
960 720 720 720 900 480 660 660 720 840 780 540 840 16080
268 187 234 173 297 137 188 211 230 286 237 178 289 4700
17.6 12.2 8.7 14.1 19.7 18.3 22.9 17.0 23.3 20.1 20.1 22.6 22.5 24.0 21.4 23.3 24.3 20.6
544
771 588 555 598 690 383 527 511 558 638 613 414 636 12762
Moulds made
177
116 85
291 188 250 185 305 138 190 215 246 294 240 178 302 4911
Bad moulds
12
134
2
23
16
12
16
23
222
2044
Bntonite
consumption T
32.77
Lustron Consumption
T
21.55
34
A
1
2
3
4
5
6
7
8
Date
Maintenance Delays
VW1 positinal control missing
VW3 position control missing
ZL actual value stop lowering to
flask closing position
TZ6 cylinder position missing
TZ2 interlock forward missing
Shake out trip ( relay voltage
drop)/Motion control 1
/Emergency stop
FM lifting frame problem
FM lift HNC fault / working door
safty Ckt problem
11
15
16
17
18
21
13
14
15
16
28
Total
Freque
ncy
7
93
2
3
19
15
5
3
1
3
68
48
3
1
16
8
1
1
150
7
1
1
32
13
69
18
5
3
1
0
9
0
1
90
30
43
9
15
2
64
48
16
8
AR2 in position missing /Hyd. OFF IN KB1 , box shifted out of track
JVM pallet control missing
TZ4 actual value forward positon
missing
Fm lift frame control 1 missing/
frame right missing
ZL clamping missing , so only drag
box take up
TZ1 forward interlock ok gap
missing
17
18
23
5
48
22
150
7
28
3
2
4
10
2
2
9
90
15
12
35
15
23
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Date
Filling frame control right
missing
Squeeze piston rams groove
edge bolt broken .
Tz5/Dz4actual valve forward to
cashoning pas missing
Tz5/Dz4 actuaL Position control
missing
BUR right up missing
DZ2 actual value pull missing
FM Squeeze position not
reached
Aearetor 1 rod broken
VW4 position control missing
US1 stop lifting to take over
position
DZ6 actual value pull position
missing
Frequ
ency
16
42
126
0
0
2
0
0
0
0
0
0
0
0
26
26
0
17
4
0
2
1
920
11
15
16
17
18
21
22
23
28
30
13
42
93
33
Total
70
111
90
155
124
33
24
61
45
10
26
45
21
36
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
Date
PROCESS DELAY
Metal not ready and transfer
time
299 180 259
20
22 47
Core setting line stop
Spillage iron detection
Programme selection mistake
by operator
Core setting fixture problem
Pattern correction work
Core fixture pin Problem
Chills not available
Wrong selection of bolster by
operator
FM Working door open
47
42 49
S4 block mould trail
Line stoppage before punch
out
Stoppage for mold validation 16
13 42
Insertion of heat code
167 448
38 43
13
300
31
295
26
11
15
16
17
18
21
22
23
28
30
302 434 225 283 331 249 385 383 267 426
41 32 60
5
30 63 40 39 12 38
50
19
52
70
63
64
67
58
30
3
62
51
120
51
60
70
46
60
Frequ
Total ency
7186
772
18
23
23
2
50
0
0
0
22
1
0
0
0
2
120
1200
30
32
426
27
1
20
2
417
0
22
0
32
17
10
30
17
34
32
12
27
30
25
25
56
10
28
319 626
466
475
464 579 334 420 457 501 547 516 351 564 10300
45
45
40
50
81
40
10
15
85
50
131
584
549
595 690 381 525 509 557 639 611 413 635 12705
15
35
80
50
50
10
20
10
25
30
40
15
20
45
60
45
45
18
30
24
14
14
32
12
23
40
50
45
16
46
66
50
60
50
965
133
365
60
50
1463
23
2
14
37
Date
ACTIONS
Adjusted JVM with gap
between Trolley pallet & Box
of locating device is not less
than 15mm. Tightened the
bolt.
A 27
A2
A 11
A3
11
15
16
17
18
21
22
23
28
30
Frequ
Total ency
A7-A
23
A 25
A9
A 21
38
A
1
2
3
4
5
6
7
Date
11
12
13
14
18
19
20
22
26
27
30
Total
Production time
Target of mould
Actual mould poured
Utilization %
Time Lost in minutes
Moulds
Bad moulds
Mixer batches- Total
Bntonite consumption T
Lustron Consumption T
Maintenance Delay
VW1 positinal control missing
480
680
121
17.8
395
135
14
760
1077
196
18.2
622
203
7
735
1041
184
17.7
605
190
6
700
992
238
24.0
532
243
5
770
1091
234
21.5
605
269
35
945
1339
293
21.9
738
298
5
866
1227
260
21.2
682
277
17
919
1302
296
22.7
710
323
27
480
680
217
31.9
327
221
4
840
1190
347
29.2
595
353
6
660
935
198
21.2
520
238
40
806
1142
246
21.5
632
276
30
768
1088
345
31.7
524
350
5
16456
23313
5144
22.1
12825
5505
361
2076
32.7
20.3
13
14
27
27
15
37
10
11
12
0
0
0
0
0
0
13
14
36
15
16
18
19
20
21
22
23
0
22
0
0
0
19
0
1
0
0
0
1
25
17
37
Frequenc
y
22
22
22
22.0
22
22
22
22
39
Freque
ncy
28
39
29
30
31
21
26
51
2
2
1
32
26
33
34
35
39
36
54
37
38
47
39
24
40
41
42
18
43
567
42
Date
26
11
12
13
14
18
19
20
22
26
27
30
18
25
2
5
39
47
7
10
15
43
28
17
16
14
76
10
51
15
40
PROCESS DELAY
Metal not ready and transfer
216
time
Core setting line stop
33
Spillage iron detection
Programme selection mistake
by operator
Core setting fixture problem
Pattern correction work
Core fixture pin Problem
Chills not available
Wrong selection of bolstaer by
operator
FM Working door open
39
S4 / Avtek block mould trail
Line stoppage before punch out
Stoppage for mold validation 30
Insertion of heat code
metal Return and restart time
+ Composition not ok
Weigment of dosing
Pattern change
Subtotal Process delays
11 12 13
14
18
19
20
22
26
27
30 Total
Frequ
ency
400 360 386 430 460 400 423 205 343 318 235 328 7402
22
44
5
772
61
22
12
27
0
96
0
46
0
5
0
1
48 37 40
6
7
20
49
7
47
8
26
48
5
12
2
35
30
3
42
13
60
63 64 38
87
59
68
48
67
52
77
61
22
54 22 24
26
28
42
19
37
16
25
10
23
24
46
58
18
19
28
35
4
71 1224
61
0
508
0
22
1
0
21
0
467
16
67
41
318 541 554 509 587 655 566 641 286 540 437 526 451 10664 28
D
1
2
3
Other Dealys
Lunch
Production Plan delayed
Sand delay
Pouring basin checking
Line stop due to taken F/c sintesing
11
12
13
14
18
19
20
22
26
27
30
Total
Frequenc
y
45
45
50
30
30
60
50
80
30
40
50
30
45
35
15
10
30
46
25
60
935
0
456
60
285
22
0
16
1
4
24
60
45
69
50
30
36
95
65
90
60
86
50
115
110
1391
43
406
638
621
555
627
764
707
741
348
630
538
656
561
13034
28
D1
D2
A 35
A 11
A 14
D3
A 31
A8
42
10
12
13
16
18
Total
Production time
768
934
740
644
930
950
960
960
820
870
8576
Target of mould
1088
1323 1048
912
1318
1346
1360
1360
1162
1233
12149
345
305
212
292
277
327
447
438
403
415
3461
Utilization %
31.7
23.1
20.2
32.0
21.0
24.3
32.9
32.2
34.7
33.7
28.5
524
719
590
438
734
719
644
651
536
577
6133
Moulds
350
332
216
293
280
413
469
485
436
509
3783
27
86
22
30
34
64
276
Bad moulds
Mixer batches- Total
1378
Bntonite consumption T
34.6
Lustron Consumption T
A Maintenance Delay
15.00
49
33
57
108
1
20
Freq
49
33
59
108
39
43
Date
Production time
Target of mould
2
768
1088
3
934
1323
5
644
912
18
870
1233
Total
8576
12149
Freq
1
1
3
35
4
17
4
10
35
6
3
73
2
2
54
10
20
13
394
438
5
356
23
289
21
2
332
25
5
77
96
55
109
3161
254
26
59
25
46
9
763
10
9
7
1
1
2
2
10
14
45
107
53
17
15
21
120
225
15
2
9
1
10
33
456
3
2
3
2
2
537
40
36
24
95
48
5005
2
4
2
10
4
6
14
4
171
325
337
4
4
10
18
220
26
28
33
142
17
5
359
72
3
363
61
4
59
33
13
58
107
25
4
71
5
44
4
740
1048
61
65
81
39
110
14
10
5
28
17
21
2
31
2
5
87
403
486
490
386
20
8
15
596
629
529
537
2
1
44
C
1
4
5
6
10
12
13
16
18
40
30
32
45
7
30
23
50
15
40
7
30
5
40
2
52
34
35
637
5
42
633
52
518
34
572
Total
Freq
305
177
60
16
482
5989
8
9
1
1
Other Dealys
Lunch
Sand delay
Line delay due to F/c sintering
Hydraulic off ( Oil circulation)
60
11
100
507
62 52 53 65
719 560 445 689
47
709
45
9 10 11 12
Total
16080
16456
8576
22780 23312.7 12149.3
4700
5144
3805
20.6
22.1
31.32
12762.4 12824.9 6132.94
4911
5505
3783
222
361
276
2076
2044
1378
32.7
32.77
34.6
20.3
21.55
15.00
Maintenance Delay
1
2
7
93
14
27
0
0
19
27
49
15
15
68
48
0
16
8
150
0
0
0
37
0
0
33
0
59
0
0
108
46
12
13
14
15
16
17
18
19
20
21
22
23
25
MONTH
JVM pallet control missing
TZ4 actual value forward positon missing
Fm lift frame control 1 missing/ frame right missing
ZL clamping missing , so only drag box take up
TZ1 forward interlock gap missing
TZ1 forward interlock gap missing /position not
reached
LSV safety flap missing
AS lift cylinder 90mm position not reached
TZ6/DZ5 cushning missing
TZ6/DZ5 BACK 100 position missing
TZ6/DZ5 gap position missing
Filling frame control right missing
Squeeze piston rams groove edge bolt broken .
1
7
32
13
0
69
18
5
0
9
90
15
16
42
0
22
0
0
0
19
0
0
0
0
0
0
0
0
126
0
0
0
0
0
39
21
26
51
0
0
39
0
0
26
0
0
0
0
0
0
0
0
0
9
5
39
54
8
47
0
0
0
4
17
0
0
0
0
4
10
35
24
20
26
17
920
0
18
567
0
13
394
Total
47
MONTH
B
1
4
6
7
8
9
10
11
13
14
15
16
17
18
19
20
21
22
23
D
1
2
3
4
5
6
PROCESS DELAY
Metal not ready and transfer time
Core setting line stop
Spillage iron detection
Programme selection mistake by operator
Core setting fixture problem
Pattern correction work
Core fixture pin Problem
Chills not available
Wrong selection of (bolstaer) by operator
FM Working door open
S4 block mould trail
Stopper rod cut+innoculation pipe jam
Stoppage for mold validation
Insertion of heat code
metal Return and restart time
Weigment of dosing
Pattern change
No metal ( melting B/D)
Core not ready
Subtotal of Process Delay
Other Dealys
Lunch
Production Plan delayed
Sand delay
Pouring basin checking
Line stop due to taken F/c sintesing
Hydraulic off( Oil circulation)
Subtotal of Others Delay
Grand Total Delay
7186
772
18
50
0
0
0
22
120
1200
30
32
426
27
417
0
0
0
0
10300
7402
772
61
27
0
96
0
46
0
1224
61
0
508
0
467
0
0
0
0
10664
3161
254
26
0
59
25
46
0
9
763
107
120
225
15
40
36
24
95
48
5005
965
133
365
0
0
0
1463
12705
935
0
456
60
0
0
1391
13034
305
0
177
0
60
16
482
5989
Total
48
MONTH
10 11
12
Total
Actions taken
A27
Adjusted JVM with gap between Trolley pallet & Box of locating device
is not less than 15mm. Tightened the bolt.
A2
A11
A3
A7
A 25,
A23
A9
1) Adjust the magnet and scale with distance between them 4-7 mm .
2) Add in monthly check point.3)Tightened all scale and transduser
A 21
holding bracket bolts. 4)Replace the magnet.
A31
1) Balancing done by fixing all rods. 2) One Flap side Belt connected
D1
A8
D3
A 29
1)Train the operator for changing the bolaster.2) Cover the sensor with
plate to avoid breakage. 3) Additional sensor provided.
1)Tightened all buckets. 2)Fix the broken bucket with new
joint.3)adjust the discharge gate.
Protection provided between boxes while pouring.
A9
D3
Switch made ready & 100 group started that time it start.
A6
A30A36
49
TREND OF BENEFITS
POWER CONSUMPTION TREND (KWH/T Liquid Metal)
800
700
722
678
680
600
500
400
Melting
327
340
263
300
Auxilary
200
100
Month 1
Month 2
Month 3
50
TREND OF BENEFITS
3500
3291
3210
3000
2500
1955
2000
Target LMT
1500
1000
27 %
864
84726 %
33 %
Actual LMT
645
500
0
Month 1
Month 2
Month 3
51
TREND OF BENEFITS
Moulding time Utilization %
35
31.32
30
25
20
20.6
22.1
Moulding time Utilization
%
15
10
5
0
Month 1
Month 2
Month 3
52
53
54
55
CONCLUSIONS
BALANCE SHEET HELPS IN LEAVING NOTHING TO
SUBJECTIVITY
DAILY WORK MANAGEMENT STANDING MEETING HELPS AS
CFT AND DELEGATES ACCOUNTIBILITY
PROVOKES THOUGHT PROCESS TO RESOLVE UNSEEN
PROBLEMS AND GO TOWARDS PERFECTION
CAN HELP IN ESTABLISHING INTER PROCESS RELATIONS AND
TEAM WORK
WE CAN CREATE BALANCE SHEETS FOR MATERIAL
CONSUMPTION, REJECTIONS AND TYPES LIKE GENERIC AND
SPECIFIC REASONS ON DAY TODAY BASIS.
56
THANK YOU
57