f8 Acowtancy - Com Text
f8 Acowtancy - Com Text
This is vital
Infographic goodness
Statutory
Non - Statutory
Statutory Audit
1. This is when entities are required by law to have an audit
2. All public and large companies are required to have one
3. Other organisations such as Building Societies and certain charities must also
Assurance Engagements
An example of this is an Auditor examining financial statements prepared by a board of directors to express an opinion as to
whether they comply with accounting standards.
Other Examples
Assurance Engagements will cover many engagements other than audit such as...
2. Stewardship
Stewardship is when a person is responsible for taking care of something on behalf of another.
This is known as a Fiduciary Relationship and exists between directors and shareholders as directors are responsible for the
management of the shareholders property.
3. Agency
Agency is where an agent acts on behalf of a principle to perform tasks for them.
In the context of a company, the directors are the agents of the shareholders (principles) who entrust them to manage the running
of the business.
This separation of ownership and management is often referred to as the Agency Problem.
Fair
1. Information is clear, impartial and unbiased
Therefore, sufficient evidence that the subject matter agrees in all material respects to the agreed criteria is required
Levels of Assurance
Remember!
A Review Engagement gives Negative Assurance
Reporting to Stakeholders
Examples
All of these should be able to make an informed decision
Shareholders
Employees
Management
By reporting in an appropriate manner, the auditor is able to ensure that each type of stakeholder receives the information
required to make informed decisions in their participation with the organisation.
Stakeholders (other than the shareholders) may also commission reports to assess control systems or company viability.
External Audit
Regulatory Environment for External Audits
The provision of audit services is regulated by International Standards on Auditing (ISAs) as well as Codes of Ethics and Company
Law.
Ok, but now I have an unquenchable thirst for some acronyms..hit me with some baby cow..
IAASB
The International Auditing and Assurance Standards Board (IAASB) is a subsidiary of IFAC and sets the International
Standards on Auditing (ISAs) of which there are more than 30.
The IAASB also sets quality control principles for all assurance engagements as well as standards for other types of
assurance engagements
ISAs
These only apply to the audit of historical financial information
Note:
If, in exceptional cases, the auditor departs from an ISA to achieve the overall aim of the audit, then this departure must be
justified.
The entire text of an ISA is needed to understand and apply the basic principles and essential procedures.
National Regulatory bodies will be charged with enforcing implementation of auditing standards, enforce quality control of
audit and inspect audit files.
Countries may do this by allowing the accountancy profession to implement the above, or set up an independent authority
to do it.
Countries also have the choice to set their own standards of implement or modify ISAs to suit their needs.
Normally an external auditor has to be a member of an appropriate regulatory body, such as the ACCA.
Provide evidence of technical competence (unless you're one of those idiot f8 students :P)
Make sure only fit and proper persons, who act with professional integrity can be an auditor
Make sure their members use appropriate technical standards (for example, ISAs)
Monitor compliance by its members with the rules of the regulatory body
Regulation by government
So which is best?
Auditor Appointment
1. Obtain clearance from the client to write to existing auditor (if denied the appointment should be declined)
2. Write to the existing auditor requesting any reasons why the appointment should not be made
And what rights does the auditor have when being appointed?
Well now there are 4 of these to remember my friend..
Casual Vacancy
Such as when the current auditor resigns
Normal re-appointment
This is normally by shareholders at an AGM - but often it is simply automatic when no AGM is required by shareholders
Auditor Removal
Auditor Removal
2. The auditor may resign (but must submit a statement outlining the circumstances of their resignation)
1. Deposit statement of circumstances connected with removal/resignation at the companys registered office.
2. If there are no circumstances, a statement stating this.
3. Reply promptly to requests for clearance from new auditors.
1. The right of access to all accounting books and records at all times.
2. The right to all information and explanations (from management) necessary for the proper conduct of the audit.
3. The right to receive notice of all meetings of the shareholders (such as the annual general meeting) and to attend those meetings.
4. The right to speak at shareholders meetings on matters affecting the audit or the auditor.
This can be important when the auditors are in disagreement with the directors of the client entity and are unable to
communicate with the shareholders effectively by any other method.
5. If the company uses written resolutions, the auditors should have a right to receive a copy of all such resolutions.
Value of Audits
Problems
Many businesses with a recent clean audit report have subsequently gone out of business.
Identification of issues that arose in the prior year audit and how these were resolved.
Also whether any points brought forward were noted for consideration for this years audit
Client website
Recent press releases from the company may provide background on changes to the business during the year as this could
lead to additional audit risks
It is concerned with matters such as directors responsibilities, the board of directors, the audit committee and relationship with
external auditors.
It ensures that companies are run in the interests of their shareholders and the wider community
Poor controls allowed management to abuse their position either in the form of excessive executive pay or manipulation of
results to the ultimate detriment of shareholders.
Who is Responsible?
The directors are responsible for implementing a sound system of governance.
Auditors will have an interest also because poor governance makes it more likely that material errors exist in the firms
financial statements.
The auditor will issue a qualified report if the directors refuse to amend the error
These principles are intended to improve the legal, institutional and regulatory framework for corporate governance
and....
to provide guidance and suggestions for stock exchanges, investors, corporations and other parties that have a role in the
process of developing good corporate governance
The strategic guidance of the company should be ensured by the corporate governance framework.
The board should effectively monitor management and be accountable to the company and shareholders.
Align executive and board remuneration in the long term interests of the company
Taking responsibility for the accounting and financial reporting system ensuring an appropriate system of control to
manage risk is in place
The Board
Good corporate governance here includes..
Chairman and Chief Executive should be different people to prevent unfettered power
Remuneration
Good corporate governance here includes..
Internal Controls
Good corporate governance here includes..
Report on whether Audit Committee review and monitor internal control system
The external auditor is also required by ISA 260 Communication of audit matters to those charged with governance to provide
management periodically with observations arising from the audit that are significant and relevant to managements
responsibility to oversee the financial reporting process.
Audit Committees
There should be at least 3 non executive directors. In the case of smaller companies, this may be 2.
Advantages of a committee
Independent Reporting
Provides internal audit with an independent reporting mechanism. Without this management may be tempted to hide
unfavourable reports.
Better Communication
Better communication between the directors, external audit and management is facilitated.
Disadvantages of Committee
1. Executive directors may perceive it as a threat to their authority.
2. Finding non executive directors with appropriate expertise may be difficult.
3. Additional costs will be involved.
4. Too much detail may be thrust upon non executive directors.
Why does the external auditor speak first to the Audit Committee?
1. To ensure independence between the board and the audit firm.
The audit committee consists of independent NEDs, who can therefore take an objective view of the audit report.
2. The audit committee has more time to review the audit report and other communications (eg management letters) than the board.
The auditor should therefore benefit from their reports being reviewed carefully
3. The audit committee can ensure that any recommendations from the auditor are implemented.
The NEDs can pressurise the board to taking action on auditor recommendations
4. The audit committee also has more time to review the effectiveness and efficiency of the work of the external auditor than the
board.
The committee can therefore make recommendations on the re-appointment of the auditor, or recommend a different firm if this
is appropriate
Internal controls cannot eliminate risk, but they can minimise it.
In the UK, internal controls are divided into three categories for the purpose of corporate
governance:
1. Financial controls
2. Compliance controls
3. Operational controls
Financial controls
These safeguard the company assets
Management and the external auditors have different responsibilities when it comes to various aspects of the client business:
Corporate Governance
Management Responsibilities
To ensure that effective measures are in place to ensure good corporate governance
Auditor Responsibilities
If under combined code, to report on any conflicts between reported corporate governance and the financial
statements
Financial Reporting
Management Responsibilities
Prepare financial statements which provide a true and fair view of the companys results.
Select and apply suitable accounting policies.
Base judgements on prudent and responsible basis.
Implement suitable internal controls.
Auditor Responsibilities
Report an opinion as to whether the financial statements give a true and fair view.
Planning the work to be undertaken.
Gathering sufficient audit evidence.
Internal audit function will be responsible for monitoring and implementation of these
Auditor Responsibilities
If fraud or error leads to material misstatement, the auditor is responsible for detecting it.
If immaterial, these should be reported to those charged with governance, but there is no responsibility to detect
them.
The inherent limitations of audit mean that the auditor cannot guarantee that the financial statements are free from
fraud and error.
The auditor must consider the risk of material misstatement due to fraud and error when planning and performing
their audit.
If discovered, fraud should be reported to the audit committee (if one exists), or the highest level of management (if
not involved in the fraud), or the shareholders if the fraud is by those in senior management.
Communication takes the form of the letter of engagement and the management letter sent at the beginning and end or the
audit respectively.
Ongoing communication should be undertaken throughout the audit.
Expectations Gap
In order to avoid an expectation gap the auditor should ensure that management are aware that the external auditor is not
responsible for:
2.
3.
4. Risk assessment
the establishment and monitoring of internal controls
Professional Ethics
Fundamental Principles
2. Objectivity
No bias or conflict of interest influencing your business judgements
4. Confidentiality
Don't disclose any confidential information to third parties without proper and specific authority
You can, however, if there is a legal or professional right or duty to disclose
Obviously never use it for personal advantage of yourself or third parties
5. Professional behaviour
A professional accountant should act in a manner consistent with the good reputation of the profession
Refrain from any conduct which might bring discredit to the profession
Threats
Categories of Threat
Auditors need to be fully aware of situations that may damage their independence.
1. Self-interest
Here the auditor may have a financial (or other) interest in a matter.
Therefore the auditor may not act with objectivity and independence.
2. Self-review
Here the auditor reviews a judgement she has taken herself.
Or an audit firm prepared the financial statements and then acted as auditor.
This is a threat to objectivity and independence.
3. Advocacy
Here the auditor is expected to defend or justify the position of the client, and act as an advocate.
This is a threat to objectivity and independence.
4. Intimidation
Here the auditor can't act independently as she is scared due to intimidatory threats such as the threat to take away the work
unless they do as the client wishes.
5. Familiarity
Here the auditor and client have a too close relationship, for example due to a long association over many years in carrying out the
annual audit.
Examples of Threats
Financial Interest
Here look for the nature of the interest and the degree of control the accountant has over it - obviously the more control
the higher the risk.
No member of the assurance team (or immediate family) should hold a financial interest in a client.
The interest should either be disposed of, or the team member removed from the engagement.
Fees
If the client fees are a large proportion of a firms total fees, there is a significant self-interest threat.
ACCA rules state that recurring fees paid by one client or a related group of clients should not exceed 15% of the income of
the audit practice (10% if the client is listed).
In larger firms an individual office may exceed these limits as long as responsibility for signing off the audit file should be
passed to a different office.
Overdue fees should be avoided as they are practically a loan.
Was the hospitality when the auditors should have been working?
Ensure the member checked with more senior people in the firm to check if it was allowed - otherwise it is a
disciplinary offence also.
Safeguards
Training
To an appropriate level for the role
This ensures that independence is considered in all work performed by the audit firm.
Consultation
So issues can be discussed internally and procedures are laid out to facilitate this
Ethical Codes
of conduct
Internal Controls
The Profession
The profession should take disciplinary action as appropriate.
The profession regularly suggest new practices and procedures designed to improve auditor independence.
So things that the profession do to help safeguard against ethical threats are:
The Individual
An individual auditor can limit ethical threats by..
Typical threats
Don't
Lowballing
Setting a very low fee either to attract new clients or ensure further work
Safeguard
Auditors should not set fees in this way, the fee must be based on a pre-determined level of work required
Contingent Fees
Where auditors fees are contingent on another event happening.
Audit Fees are not to be determined in this way
Accounting Services
If an auditor prepares the accounts it is 100% sure that they will be reviewing their own work. They may be tempted to hide
errors to save face.
So the Auditor must not undertake accounting services for a client, if they are a LISTED company.
No management decisions should be made in other companies and a different team should provide each service.
More threats
IT services
If the auditor advises on or installs accounting software for a client this will have to be reviewed during the audit.
If the IT system is important to a significant part of the accounting system, the auditor should not design, provide or
implement it.
Valuation Services
A valuation made by the auditor could have a material effect on the financial statements.
If the valuation requires a degree of judgement and have a material effect on the financial statements, then the auditor
should not undertake to provide it
Tax Services
The tax work carried out will be reviewed during the course of the audit and may encourage the auditor to hide mistakes.
If likely to have a material effect on the financial statements, should not be taken on
The way in which an audit firm should deal with potential threats to independence is to
have in place procedures to:
1. Identify any potential threats
2. Evaluate what level of risk they pose
3. Check that necessary safeguards are in place
4. Correct any problems if necessary
The audit firm should have a checklist to ensure that they meet with the standards required on Independence.
The checklist will be completed when a new client is taken on, as well as at the planning stage of each audit, at completion and
when any other services are provided to the client.
Confidentiality
If one of these categories is not applicable, then the auditor is under no obligation to disclose information and in fact may
be in breach of the ACCA code of conduct for doing so.
Auditors should screen clients to ensure they are not high risk
The risk to the auditor is reputation risk i.e. that they will be associated with a poorly regarded client.
An auditor is required under ISA 315 to gain an understanding of their client.
Auditors should screen clients to ensure they are not high risk
Regulatory framework
Financing structure
These include:
1. Get permission to contact the outgoing auditor
2. Contact the old auditor, asking for any reasons why we should not accept appointment
3. Check we are sufficiently Independent
4. Check we have the competence & resources to do it
Things to consider...
1. Fee
A fee will be quoted for a piece of audit work before it is carried out under a tendering process
The auditor must not lowball as we have seen above, nor may they make unrealistic claims or promises to win the
contract
2. Get Information
The potential client will inform the auditor of what is expected, the timetable, future plans of the company and any
problems with current auditor
3. Proposal
The auditor may then draw up a proposal containing:
Pre-conditions
Is the Financial framework used acceptable? (Consider the type of business and relevant laws and the uses of the financial
statements)
Client Decision
The client will decide on the basis of clarity, relevance, professionalism, reputation, timeliness of delivery and originality
which firm will conduct the audit
Engagement letter
The engagement letter is sent before the audit to the client confirming their acceptance of the audit
Contents
ISA 210 Terms of Engagement gives guidance as to their content, but as a rule most will include:
The scope of the audit including reference to legislation and professional standards.
Fees
Complaints procedures
Internal Audit
4. Liaising with external auditor to reduce time and expense of external audit.
5. Ensures compliance with OECD Principles.
Is it Independent?
The Internal Audit function will need to be professionally competent, sufficiently resourced and well organised in order to
carry out its function effectively.
One of the key concepts surrounding internal audit is the independence of internal audit from management.
Although the internal audit department is paid for and part of the company, care must be taken to keep it objective and
independent.
Ensure that the internal audit function is well regarded by other departments.
Have a whistle blowing function for internal audit to report serious misconduct when found.
A question regarding Internal Audit on the exam may well focus on the independence of
internal audit, so remember:
Internal Audit should report to the Audit Committee.
Scope of Internal Audit work should be determined by Audit Committee or chief internal auditor.
The head of internal audit should be sufficiently experienced and professionally qualified.
If one is deemed necessary, but doesnt currently exist, then the audit committee should make a recommendation to the board
The reason for the absence of an internal audit function should also be explained in the annual report
Accounting system
While not complex, accounting systems must provide accurate information. Internal audit can audit these systems in
detail ensuring that fee calculations, for example, are correct.
Computer systems
Maintenance of computer systems is critical
Internal audit could review the effectiveness of backup and disaster recovery arrangements
Corporate governance
Internal audit could still recommend policies for good corporate governance
2. Accounting systems
Many accounting systems are not necessarily complex so the directors may not see the need for another department to
review their operations, check integrity, etc.
3. Family business
There is therefore not the need to provide assurance to other shareholders on the effectiveness of controls, accuracy of
financial accounting systems, etc.
4. Potential cost
There would be a cost of establishing and maintaining the internal audit department
5. Review threat
Some directors may feel challenged by an internal audit department reviewing their work (especially the financial
accountant).
They are likely therefore not to want to establish an internal audit department.
Let's look at the difference in roles between internal and external audit
External Audit
Ensure accounts free from material misstatement and prepared in line with reporting framework.
Planned in accordance with ISAs
Work planned by themselves
Evidence
Internal Audit
The amount / type gathered would depend upon the objective set
Eg It may just be a check that assets exist, with no concern over their value
External Audit
Governed by IAS 330 - gather evidence to address misstatement risk
The risk would have been analysed during planning and in the light of subsequent evidence
Reporting
Internal Audit
Determined by the nature of the assignment
External Audit
Determined by statute & ISAs 700/5/6
Communicate to stakeholders
Items such as
1. Effectiveness of systems
2. Effectiveness of Internal Controls
3. Whether manuals are followed
4. Whether internally produced info is reliable
5. Compliance with OECD
Action
Report to Audit Committee instead
Scope of Work
Could be decided by executive directors and thus influenced away from their particular areas (the cheeky monkeys)
Action
Scope decided by chief internal auditor or audit committee
Audit Work
Auditing their own work (Self review threat)
Action
Chief internal auditor doesnt establish any controls herself
(see how modern metrosexual I am... ;)
Lengths of Service
Too long in IA and there may well be a familiarity threat
Action
Rotation of work into different areas
So being an IA is basically just a crazy, roller-coaster of a life..
Action
Appointed by the whole of the board or Audit committee
A firm may decide to outsource its internal audit function as this may
seem like better value for money
Advantages of Outsourcing
1. The provider will have specialist staff.
2. Cost of employing and training full time staff is avoided.
3. Outsourcing provides an immediate internal audit department.
4. The time scale is flexible with the contract lasting just for the appropriate time.
5. Independence may be improved.
6. Audit methodology and technologies will be up to date.
Disadvantages
If Internal and External audit are provided by the same firm (prohibited under ethics rules in UK) then there may be a
conflict of interest.
Independence may not be ensured by outsourcing due to threat of management not renewing the contract.
The cost of outsourcing may be so high as to encourage the firm not to have an internal audit function at all.
As follows
1. Economy
Are goals achieved at a minimum cost (still paying attention to quality)?
2. Efficiency
Are resources being used to maximise output?
3. Effectiveness
Are objectives being achieved?
It may be difficult to define the objectives particularly of a Not for Profit organisations with many different factors
influencing policy.
Economy and efficiency may work against quality which will be required to ensure effectiveness.
1. Challenge
Why and how is a service provided?
2. Compare
Assess performance against other providers
3. Consult
Talk to users for feedback
4. Compete
Provide efficient, effective services through fair competition
Internal auditors within an organisation implementing best value will play an integral role in ensuring its effective
implementation.
Information Technology
The internal audit function of an organisation may well have an IT specialist in the team.
The main function of internal audit in the area of IT will be to assess the controls in place.
Other functions will be to ensure that the systems in place represent value for money and also to ensure effective controls over
the awarding of IT contracts.
Financial Assignments
The role of IA here is to make sure the information required for management and external accounts are reliable and produced
timely.
Financial internal audit work echoes the work of the external auditor. Checks will be made of record keeping and implementation
of financial procedures
The main concentration will be on preventing fraud and error.
It can also look to design controls which help identify inflation, interest rate and currency risks
Operational assignments
An assignment based on operations should identify the possible risks involved in that operation, the procedures in place to
mitigate the risks and whether those procedures are being followed.
An Operation which may be examined is:
Procurement
Are the systems in place for control of purchasing operating effectively?
Internal Audit should discuss with management as they conduct their assignment any issues that arise and not just include
unexpected findings in the report.
1. Cover
The cover will set out the subject, who the report is to, the date and any rating/evaluation required
2. Executive Summary
This section summarises the report to get across the essence of the findings
Planning an Audit
Why Plan an Audit?
Time spent planning the audit to ensure it is carried out efficiently will reduce the time taken and thus the cost.
The planning process will also assess and thus reduce risk.
The auditor will want to ensure that the correct team is in place to conduct the audit, they are working efficiently and that work
is focused on material areas of risk and potential problem areas.
Planning Activities
Risk Assessment
We will look in detail later at risk assessment, but at this point we should be aware that the identification of risk will
determine the entire audit process.
Audit Strategy
The audit strategy sets out the scope, timing and direction of the audit.
The scope of the audit will be determined by the reporting framework applied as well as any industry specific
requirements.
The strategy decided upon will be tailored to the client and the nature of their business and their structure. The
auditor must ensure that the strategy selected is appropriate
Geography
If there are any geographical or other factors which may affect the audit, they will be considered here.
As follows
Ensure understanding of the business
Permanent file
The permanent file kept by the audit firm will bring forward a lot of the knowledge of the business, but this must be kept up
to date.
Current File
The current file contains the evidence and documents relevant to the current year.
The planning section of the file will cover all of the areas above, and there will be a completion section which will review the
audit.
In between there will be a sub-section for each balance sheet item (e.g. Non Current Assets) and for each income statement
item (e.g. purchases) with the work done outlined and evidence documented
Audit strategy sets out the scope, timing and direction of the audit
The document should identify the main characteristics of the engagement which define its
scope
1. If the accounts have been prepared in accordance with IFRS
2. How much audit evidence obtained in previous audits will be used
3. Whether computer-assisted audit techniques will be used
4. The availability of key personnel
The audit timetable for reporting and whether there will be an interim as well as final audit
The timings of the audit team meetings and review of work performed
The document should show the factors directing the audit team's effort
such as:
Materiality levels
It should consider the knowledge from prelim planning & other areas
such as:
This is a matter of timing and the auditor has the following choice:
Interim Audits
Basically before the Year-end, allowing procedures to be more spread out and improve planning of the final audit - through
improving risk assessment and making final procedures more efficient
Evaluating controls
2. Timings
Early enough - so not interfering with Y/E client work
Late enough - to give adequate warning of specific problems that will need to be addressed
Final Audit
Post year-end, focus on year end valuations and areas of significant subjectivity
ISA 200 says to obtain reasonable assurance, the auditor shall obtain
sufficient appropriate evidence to reduce audit risk to an acceptably low
level
ISA 315 extends this to identify and assess the risk of material misstatement...designing and implementing responses to the
assessed risks of misstatement
Misstatement
ISA 450 Evaluation of Misstatements Identified During the Audit states that this occurs when something in the accounts is not in
accordance with the applicable financial reporting framework
They can arise from error or fraud
There are 3 categories...
Factual Misstatements
Those where there is no doubt
Judgmental misstatements
Those where the managements judgements on estimates not considered reasonable or the policies are inappropriate
Projected misstatements
These come from extrapolating misstatements in samples across a population
Uncorrected Misstatements
Misstatements that the auditor has accumulated during the audit and that have not been corrected.
The auditor has a responsibility to accumulate misstatements which arise over the course of the audit unless they are very
small amounts.
Identified misstatements should be considered during the course of the audit to assess whether the audit strategy and plan
should be revised
It is An attitude that includes a questioning mind, being alert to conditions which may indicate possible misstatement due to
error or fraud, and a critical assessment of audit evidence
In other words, they must not simply believe everything management tells them
The auditor will need to exercise professional judgement on both the quantity and the quality of evidence.
So he has to judge..
1. When is there sufficient evidence?
2. What is the quality of this evidence
Audit risk is the risk that the auditor expresses an inappropriate audit
opinion when the financial statements are materially misstated
Stated another way, this is the risk that there is a material misstatement in the financial statements, but the auditor misses it
and says that they present a true and fair view.
Control Risk x
Detection Risk
Inherent Risk
This will be considered at the planning meeting as it depends on the auditors knowledge of the business
Examples are...
Control Risk
This is the risk of material misstatement due to inadequate internal controls within the business.
The auditor will make a judgement as to the suitability and strength of internal controls we will examine how this is done at a
later stage.
Examples are...
No segregation of duties
Segregation of duties is where different tasks in a process are performed by different people e.g. an invoice is raised
by one person and the cheque is written by another and authorise by someone else.
If this control is weak or not in place, the auditor may have to increase the sample size to ensure the financial
statements present a true and fair view.
Detection Risk
This is the risk that the work carried out by the auditor does not uncover a material misstatement that exists.
Detection risk can be split into sampling & non-sampling risk
Non-sampling risks
The auditor did not sufficiently investigate a significant balance
Sampling risk
arises from the possibility that the auditors conclusion, based on a sample may be different from the conclusion
reached if the entire population were subjected to the same audit procedure.
This is another way of saying that the sample selected by the auditor was not representative of the data.
Detection risk may be increased by things such as inexperienced audit staff or tight deadlines to complete the audit.
The auditor cannot affect inherent risk or control risk as these are
internal (called Entity Risk)
The auditor therefore concentrates on detection risk once they have assessed the control and inherent risk.
Consider the elements of Audit risk and how they relate in our formula:
Inherent Risk x
Control Risk x
Detection Risk
If Inherent & Control risk are judged to be high, then to minimise overall audit risk, the auditor must attempt to minimise
detection risk.
The auditor will have to increase the amount of tests or the number of samples to ensure that there is less chance of a material
misstatement being overlooked or missed.
Firstly the auditor needs to understand the entitys environment, this will
require the auditor to assess:
The following..
Industry conditions
Competitors
Technology
Stakeholders
Financing
Related parties
Competence of management
Accounting policies
ISA 315 requires a planning meeting where the members of the engagement team should discuss the susceptibility of the entitys
financial statements to material misstatements. The minutes of this meeting should be documented as evidence of its
occurrence.
Analytical procedures should be undertaken at this stage to establish an understanding of the financial statements and draw
attention to anomalies.
We will look more closely at analytical procedures later.
This involves recognising the nature of the company and management, interviewing employees, performing analytical
procedures, observing employees at work, and inspecting company records.
After you run through all applicable risk-assessment procedures, you use the results to figure out how high the chance is that
your client has material financial-statement mistakes.
Not every mistake is important.
Fraud
Misappropriation of assets
Error
Examples are:
A mistake in gathering data from which FS are prepared
Irregularity
Management Responsibilities
These are:
1. Safeguards created to avoid fraud and error using internal controls
2. Internal audit is responsible for monitoring and implementing these
Auditor Responsibilities
If fraud or error leads to amaterial misstatement, the auditor is responsible for detecting it
If fraud is discovered
Report it to the audit committee or
Highest level of management (if not involved in the fraud), or
Shareholders if the fraud is by those in senior management
Investigating Misstatements
Materiality
Materiality Levels
1.
The auditor will decide materiality levels and design their audit procedures to ensure that the risk of material misstatements is
reduced to an acceptable level.
Generally, materiality will be set with reference to the financial statements such as:
0.5 1% of turnover
5 10% of profits reported
1 2 % of gross assets
Judgement will be used by the auditor in charge and will depend on the type of business and the risks it faces.
2. Considerations
Quantity
The relative size of the item
Quality
This might be something that's low in value but could still affect users' decisions e.g.. Directors wages
Tolerable Error
This is when the auditor accepts the error
For example finding one error out of 100 tested, might be ignored
Performance Materiality
Example
The company you are auditing makes a $5,000 profit.
The materiality is set at $10,000
You notice that an invoice for $6,000 has been incorrectly placed into next year.
This would be material as it changes the look of the whole accounts (changing a profit into loss)
The new standard recognises that there could well be instances where certain classes of transactions, account balances or
disclosures might be affected by misstatements which are less than the materiality level for the financial statements as a
whole, but which may well influence the decisions of the user of those financial statements regardless of the fact they are
below materiality this is where performance materiality is to be applied.
Specifically, the clarified ISA 320 suggests performance materiality be applied to areas such as related party transactions
and directors remuneration.
having a general understanding of the legal and regulatory framework within which the company operates
understanding how the entity complies with those laws and regulations
Analytical Procedures
Analytical Procedures in Planning
At the planning stage they help you understand the business and its environment
Because you compare figures to the industry and to previous years
Any items which go against the expected relationships help you assess the risk of material misstatement
Ratio analysis
The comparison of relationships using financial and non- financial data
Reasonableness testing
Comparing expectations based on financial data, non-financial data, or both to actual results
Audit Documentation
Importance of Documentation
report
It also proves that the audit was planned and performed correctly
1. Repeat
Allow an experienced auditor (with no previous client knowledge) to know exactly what work was performed and what
conclusions reached.
2. Record of:
Nature, timing and extent of the audit procedures performed
Results of procedures
Conclusions drawn
3. Reasoning
Contents of Documentation
Includes
5. Correspondence
Systems Information
Title deeds
Contracts
The auditor must be careful if they include copies of client generated items
So, ensure laptops should always be locked away securely or taken home by the audit team
IT based systems should be subject to passwords, encryption and back up procedures
3. IT back ups
Internal Control
Understanding it means you can trust that the system gives reliable information
In this way internal controls will have a direct effect on Audit Risk
These are
1. Control Activities
2. Risk Assessment
3. Information Systems
4. Monitoring of Controls
5. Strong Control Environment
Control Activities
This includes all procedures designed to ensure management directives are carried out
Controls over IT
Passwords, usernames, back-ups and any other appropriate controls should be in place.
Reconciliations
Key account balances such as bank and debtors should be reconciled on a regular basis.
Arithmetical Accuracy
Items such as invoices etc should be checked to ensure they are arithmetically correct.
Control Accounts
Control accounts for accounts such as wages, PAYE, VAT should be maintained.
Segregation of Duties
Responsibilities should be divided to reduce the risk of fraud and error by employees
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
Risk Assessment
1. The auditor should understand how management assess risk and how they take action to mitigate risks discovered
2. Management should be undertaking regular risk assessments to ensure that all risks are identified and mitigated.
Information System
The auditor must obtain an understanding of the information system, including the related business processes, relevant to
financial reporting.
The auditor must decide what areas of the information system are relevant to the financial reporting of the entity and only
concentrate on those systems.
This is a key area to the exam as a question will often require you to understand business systems in a scenario. Read and
ensure you understand the above areas.
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
Monitoring of Controls
1. Controls may be monitored either by management or by the internal audit function if one exists.
2. The auditor may be able to rely on some of the work of internal audit as we will see later, but must first gain an understanding of
how controls are monitored and how effective the monitoring is.
The control environment refers to the framework around which the controls of the organisation operate.
Management attitude will largely determine the nature of the control environment.
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
Therefore the auditor will assess each of the areas mentioned before (control environment, control procedures etc.) in order to
identify risky areas.
The auditor will then undertake tests of control to establish whether the auditor can place reliance on them
Test of Control
These test the systems in place by determining whether the controls over it are sufficient or not
If the control in place is strong, then the auditor is able to place reliance on the information generated by that particular
system
Substantive procedures
These, on the other hand, are procedures to gain direct assurance over a figure in the financial statements.
The first step the auditor will take is to document the system
A written description of the system showing what happens and the controls operating at each stage
1. Narrative notes can become too much, especially if the system is complex
2. They don't identify control exceptions - they just record what is there
1. Too easy for staff to overstate controls present (as the questions relate to potential controls)
2. A standard list of questions may miss out unusual controls
Flowcharts - Advantages
These diagrammatically illustrate the internal control system
Lines show the sequence of events
Symbols signify controls (or documents)
Flowcharts - Disadvantages
These diagrammatically illustrate the internal control system
Lines show the sequence of events
Symbols signify controls (or documents)
Transaction Cycles
Revenue (Sales Cycle)
Objective to ensure all valid sales recorded accurately and cash received
promptly
These include:
1. Review new customers files for references, credit checks, authorisation by senior staff
2. Ensure credit limits for customers are not exceeded by trying to post a sale which is beyond the credit limit
3. Match GDN with sales invoices checking prices, quantities, arithmetical accuracy, VAT and postings
4. Verify credit notes with correspondence, original invoices, amounts and authorisation
5. Check numerical sequence of invoices, credit notes, GDNs and sales orders enquire into missing numbers
6. Review sales ledger reconciliations
7. Agree sample of accounts in sales ledger re-performing additions and balances carried down
8. Inspect correspondence on overdue accounts
9. Review process for dispatch of statements and ensure regularly sent
Purchases
As follows:
1. Purchases made only when needed.
2. Purchased at a reasonable price.
3. The goods have satisfactory quality.
4. The goods delivered match those ordered.
5. Purchases are recorded accurately.
6. Payments are valid and paid for in a reasonable timescale.
Payroll
as follows:
1. Only work done is paid for
2. Pay is accurately calculated
3. Pay is correctly made
4. Pay is authorised
5. Deductions are correctly calculated and paid
Inventory
as follows:
1. Inventory movements are recorded and authorised
2. Only items belonging to the client are included in inventory
3. Inventory records are accurate
4. Cut-off procedures are correct
5. Inventory is valued correctly
6. Inventory levels are neither too low nor too high
7. Liabilities are recorded accurately
8. Allowance is made for slow moving and obsolete inventory
Perpetual Inventory
Perpetual inventory is the recording as they occur of receipts, issues and the resulting balances of individual items of inventory in
both quantity and value. These inventory records are updated using stores ledger cards and bin cards.
Stocktaking
The process of stocktaking involves checking the physical quantity of inventory held on a certain data with the balance on the
stores ledger cards or bin cards.
Stocktaking can be carried out either on a periodic basis or continuous basis.
Periodic stocktaking
Periodic stocktaking involves checking the balance of every item in inventory at a set point in time, usually at the end of an
accounting year.
Continuous stocktaking
This involves counting and valuing selected items of inventory on a rotating basis. Each item is checked at least once a year.
Control procedures to minimize discrepancies and losses
Inventories cost a considerable amount of money and therefore, control procedures must be in place.
Such control procedures would include:
1. physical security procedures, regular stocktaking and recording of all issues to eliminate unnecessary losses from inventory;
2. separation of ordering and purchasing activities to eliminate fictitious purchases;
3. quotation for special order to reduce the probability of ordering goods at inflated prices.
Inventory losses arising from theft, pilferage or damage must be written off against profits as soon as they occur.
Capital expenditure
These include:
Ensure authorised by senior management
The asset register includes invoice for the purchase, location, value etc
The documents confirming the ownership of the assets should be kept safe in a fire proof environment
The management letter will express the fact that the weaknesses found are not necessarily all weaknesses but just those found
by the auditor.
The report will also express that it is for the sole use of management and no disclosure will be made to third parties
Structure
1. Weakness
2. Consequence
3. Recommendation
In the exam you should use a table format wherever possible, such as below
Deficiency
Implication
Recommendation
Tests of Control
Application & General IT controls
Examples are..
Batch total checks
Sequence checks
Arithmetic checks
Existence checks
Authorisation checks
Examples include:
Software system acquisition controls
Backup controls
The auditor must be aware of the implications of the IT systems of the entity.
Many transactions may now be automated and the automation must be checked and understood.
Large volumes of transactions can now be performed by IT systems leading to greater focus on how the transactions are
generated
ACCA MAPS
This is a little memory technique for remembering the typical controls in a business
Authorisation
Computer controls
Comparison
Arithmetic
Account reconciliations
Physical controls
Segregation of duties
The management letter will express the fact that the weaknesses found are not necessarily all weaknesses but just those found
by the auditor.
The report will also express that it is for the sole use of management and no disclosure will be made to third parties
In the Exam
Often you have to report deficiencies in the form of a management letter in the exam...
So use this structure..
Deficiency
Clear description of what is wrong
Consequence
What would happen if this is not corrected
Look at this from the client viewpoint - not the audit
So think of costs, time, reputation, lost sales etc
Recommendation
Be specific here - on the actual deficiency in the scenario
Also make sure that the benefit of the recommended action outweighs the cost
Don't just think of what to do, also think of who and when
Consequence
Recommendation
I'm an idiot
Audit Evidence
Transactions Assertions
1. Occurrence
2. Completeness
3. Accuracy
4. Cut-off
5. Classification
Disclosures Assertions
1. Occurrence
2. Completeness
3. Classification and understandability
4. Accuracy and valuation
Using Assertions
This is done by
1. Inspection
This means a physical examination
2. Observation
This means watching others perform a procedure
Inventory counts
Opening mail
3. Inquiry
This means getting information from people inside or outside the entity.
4.
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
5. Confirmation
This means corroborating evidence from third parties with the internal evidence
6. Re-Performance
This can be recalculating figures or re-counting stock etc
7. Analytical Procedures
This is the analysis of ratios and trends
It includes investigating fluctuations between current and previous performance and check whether other information is
consistent with such relationship.
For example, comparing the rent charge from one period to the next and see if other evidence such as number of rental
properties corroborates the increase or decrease
Audit Procedures
Quality and Quantity of Evidence
Sufficient
refers to the quantity of the audit evidence needed
Appropriate
refers to the quality, relevance and reliability of the audit evidence
1. You need enough to have reasonable assurance that the specific audit area is free from material misstatement
2. A high quantity of poor quality evidence does not mean its sufficient (or appropriate)
3. The auditor must consider both the relevance and the reliability of the evidence
4. Be careful though of over auditing.
Lots of high quality evidence on immaterial areas is a waste of resources
Invisible Evidence
Ticks on audit programmes that say a procedure has been done, but where there is no evidence of it
Audit programmes should contain a cross-reference to the tangible evidence on file.
Lead schedules
Eg The Investment Property lead schedule that reconciles the opening fair value to the closing fair value
Lead schedules should be cross-referenced to the audit evidence that supports the relevant figures/disclosures
Redundant accounts
Accounts and trial balances which have been superseded
Particularly where the audit firm is involved in the accounts preparation, these are not sufficient or appropriate audit
evidence
Better when generated internally but the related controls are effective
So here's a reminder...
1. Analytical Procedures
2. Enquiry
3. Inspection
4. Observation
5. Re-calcUlation / Re-performance
Procedure
Meaning
Control test
Substantive test
Analytical
procedure
Exploring relationships
between data
Enquiry
Getting confirmation
from a 3rd party
Inspection
Examining records
Signature as evidence
Observation
Looking at a process
Recalculation
Checking mathematical
accuracy
Analytical procedures
There are two categories of substantive procedures - analytical procedures* and tests of detail.
*Analytical procedures generally provide less reliable evidence than the tests of detail
AP's are used at different times in the audit whereas tests of detail are only applied in the substantive testing stage
Analytical procedures are compulsory at two stages of the audit under ISA 520:
Analytical procedures use calculations such as financial ratios to generate an expectation of what a figure is likely to be and then
comparing this to the actual figure in the accounts.
They can be used to highlight unusual figures in order to focus the audit on them or to establish that a trend has continued.
The financial ratios used by the auditor will fall into 3 general categories:
Profitability/Return
1. Gross Margin
2. Net Margin
3. ROCE
Liquidity/Efficiency
1. Receivables/Payables/Inventory Days
2. Current Ratio
3. Quick Ratio
Gearing
1. Financial Gearing
2. Operational Gearing
Reliability
The auditor may only rely on data generated from a system with strong controls
Degree of Precision
Some figures will not have a recognisable trend over time or be comparable
Acceptable Variation
Variations having an immaterial impact on the financial statements will not hold as much interest to the auditor as
those that do
The auditor must be sure that the judgements and estimates made by
management are sound
Management will have to use an element of judgment in preparing the financial statements in areas such as depreciation rates,
deferred tax and provisions
The auditor will carry out several procedures on an area of accounting estimate
1. Look at the process employed to calculate the estimate and decide whether it is appropriate
2. Use the work of an expert to ascertain whether an estimate is accurate
3. Check that any items accrued for do occur after the balance sheet date
4. Discuss any points of concern with management to see why they included the item at the amount they did
Record keeping and documentation of systems and controls may be informal or inadequate
Opening Balances
The opening balances have the same accounting policy as current year
Do current year procedures provide evidence for OB (eg cash received on opening receivables)
Comparatives
The audit opinion should not normally refer to the corresponding figures
Prior period financial statements were audited by another auditor - use "other matter" paragraph to explain this
Prior period financial statements were not audited - use "other matter" paragraph to explain this
Modify Report
Other Information
The other information in the accounts such as the Directors report, the Chairmans report and the employees report are not
covered by the audit.
However, the auditor must review such information and highlight any material inconsistency with the audited financial
statements or material misstatements of fact.
Material inconsistency
If FS are wrong - and management refuse to amend - qualify the audit report due to disagreement
If OTHER INFO is wrong - and management refuse to amend - an EOM paragraph only is needed
Misstatement of fact
If management refuse to amend then an EOM paragraph is needed
Cut-off problems
Direct Confirmation
This is often referred to as the "Debtors circularisation".
This means asking customers for written confirmation of their account balance
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
Rights and obligations Ensure client has the legal right to the amounts receivable
Cut-off Ensure transactions have been recorded in the correct accounting period
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
2. If the response is not reliable for sure - then consider the effect on risk assessment and perform more alternative
procedures
4. Client confirms different amount - decide if this is just a timing difference or a problem with controls or fraud
1. Planning
2. Deciding Positive or Negative Confirmation
3. Selecting a Sample
4. What to do when you get the Replies
5. Summarising & Concluding
Planning
When to do it (Timing)
Who to include (The sample)
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
1. A positive confirmation request asks the customer to reply to the auditor whether or not he agrees with the balance
This asks the customer to reply only where he disagrees with the balance
If no reply is received - this means he agrees, however it might also mean he never received or checked
4. No evidence that the customer would ignore the request for confirmation
Sample Selection
2. Negative balances
3. Accounts on which round sum payments are received (instead of paying the actual invoice amounts)
4. Nil balances
4. No reply received?
These cannot be ignored!!
Bad debts
Cut-Off
This ensures that revenue (and therefore receivables) are properly recorded in the correct accounting period.
Sales around the year-end need to be shown in the correct year
Ensure sales invoices and credit notes around the year end are shown in the correct year
Ask for explanations about unusual control account entries around the year end
Receivables - Prepayments
Completeness Assertion
Not all stock owned is included in accounts
Existence Assertion
Not all stock included in accounts actually exists
Valuation Assertion
Stock is incorrectly valued
Due to incorrect cost allocation
Not valuing at NRV (if lower than cost)
Discrepancies can help point to control deficiencies (that would otherwise have gone unnoticed)
Observe
Is the count being performed according to managements WRITTEN instructions
If any inventory condition is poor
If any inventory not owned by client is identified and labelled as such
How entries in and out of stock are dealt with during the count
If all items have been tagged as counted
Record
Any differences between their own test count and that of the client..
Test from stock to client records (for completeness)
Test from client records to stock (for existence)
The sequence numbers of the last tags and summary sheets used during the count.
This record will be used after the count to confirm that all inventory items are included in the clients inventory list
Goods received (& despatch) notes issued before and after the count (for cut-off)
Details of slow-moving or obsolete inventory, or inventory in poor condition
It helps avoid the potential disruption of an annual count at the year end of the reporting period
Inventory - Valuation
2. Audit Tests
Confirm which Inventory method used (FIFO, AVCO etc)
Check figures to purchase inventories
3.
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
2. Audit Tests
Get breakdown
of costs of finished and WIP goods
Calculations
Check and recalculate
Materials
check fifo etc and to purchase invoice
Labour
Check pay rates against payroll records
Check hours worked with time records
Production overheads
Inventory - Cut-off
Sales Cut-off
Ensure sales are shown in the right period.
It's not just sales that would be wrong otherwise but also receivables and closing inventory (oh yes it would be a jolly wolly mess
if we get it wrong)
Not only that, my little F8 ball of cut-off awesomeness, you need to be careful that the debit entry is not in receivables
AND inventory
Purchases Cut-off
This is just as exciting..
All purchases must be shown in the right period too - amazing right?! :)
This will effect inventory also
Correct Entries
Dr Purchases Cr Payables
Also it will be in closing stock (if not sold)
Dr Inventory (SFP) Cr Cost of Sales
Audit work
1. Goods received notes
Record the numbers of these around the year end
2. Despatch notes
Record the numbers of these around the year end
Payables - Trade
Cut-off incorrect
Substantive Procedures
Get a list of balances
Purchases Cut-off
Goods received before year end - should be shown in inventory and as a liability
Payables - Accruals
Accruals balances are difficult to audit as the figures reported are often
based on estimates
Although these are often not material - we are checking mainly for completeness
We will use analytical procedures and the auditors knowledge of the business
Substantive Procedures
Get a listing of accruals
Wages accrual
This is often higher than the others
Payables - Provisions
Review legal correspondence and possible direct confirmation from them (letter from management but reply direct to
auditor)
Contingent Assets
Substantive Procedures
Obtain the list
This list should show the movement in the year (an amortised cost table basically)
Review cashbook for large, unusual receipts that may actually be new loans
Valuation assertion
Reconciliation differences incorrectly dealt with
Completeness assertion
Method 1
The auditor gives the balances from the clients accounting records and asks the bank to confirm
Method 2
The auditor asks for the balance (not giving the bank the balance first)
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
A signed receipt from the official, stating the cash returned after the count by the auditor
There are many things here.. cost, depreciation, additions, disposals and
disclosures..hold tight!
Existence assertion
Assets in the FS don't actually exist (already sold or scrapped)
Valuation assertion
Incorrect recording, valuations, or depreciation calculations
Get the NCA register (showing cost, additions, disposals, revaluations, impairments, depreciation)
Existence
Important check here for overstatement
Valuation
Land and buildings Cost
Check to purchase invoices
Look for directly attributable costs (such as professional fees and delivery).
Check split between land, buildings and equipment
Equipment and vehicles cost
Check to the purchase invoices
Disposals
Get a list in your fist and give it a kiss
Check authorisation of the disposals
Check cost and accumulated depreciation of disposals has been removed
Check calculation of profit/loss on disposal
Check accounting is correct
play audio
pause audio
clipAttachment
play
Tweet Like
RCAtweets
Development costs
Goodwill Proforma
FV of consideration
1,000
FV of NCI
400
(1200)
Impairment
(100)
Goodwill
100
Equity
Check the nominal value of shares issued during the year to supporting documentation
Check cash received for shares is properly recorded in the main ledger (not to sales)
Check no legal requirements have been broken (eg. Improper use of share premium account)
Check dividends have only been taken from a legally distributable reserve (eg NOT share premium)
As the auditor can't test everything, only samples are used for
substantive testing
The tests of controls which we have looked at will establish for the auditor how much reliance he can place that the information
generated by the system is free from error.
The results of tests of control will therefore determine how much substantive testing is required (tests performed on individual
figures in the financial statements).
The amount of substantive testing undertaken can therefore be varied by using different sample sizes.
This is one of the reasons the auditor cannot give absolute assurance over figures in the financial statements the audit has
been carried out on a sample basis.
This is telling the auditor that they can use a sample to draw conclusions about some aspect of the transactions (e.g. were they
authorised?) rather than looking at every transaction.
Material items in the population must be tested. This means that 100% of transactions may be tested if they are all material.
The ISAs do not require sampling to be used.
Statistical or non-statistical?
Statistical sampling
Statistical sampling
A Random selection using generation of a random number and an interval size to select the items
Extrapolate the error rates e.g. (if half of the sample's wrong then half of the population is too)
Non-statistical sampling
Any method which does not fit into the above is non-statistical sampling
Methods of Sampling
These are
Random selection
Ensures each item in a population has an equal chance of selection
Systematic selection
A number of sampling units in the population is divided by the sample size to give a sampling interval.
Haphazard selection
The auditor selects the sample without following a structured technique the auditor would avoid any conscious bias or
predictability
Judgemental selection
Selecting items based on the skill and judgement of the auditor
Misstatement or deviation
The smaller the tolerable misstatement or rate of deviation, the greater the required sample size
The higher the expected misstatement or rate of deviation, the greater the required sample size.
CAATs use a computer to assist the auditor in testing during the audit
procedures
Audit Software
The auditor may use audit software to run the client data to check for errors
It can be an off-the-shelf software or bespoke for the client.
They can scrutinise large volumes of data, whose results can be investigated further
The software does not, however, replace the need for the auditor's own procedures
It can do the following:
check calculations
produce reports
follow transactions
Test Data
Another method which may be used by the auditor is the use of test data.
This is really putting a dummy transaction through the system to ensure that controls are working and that calculations are
performed correctly
Examples of errors
This increases audit risk as the auditor cannot tell with certainty whether the internal processes of the system are working
correctly
Disadvantages
1. CAATs can be expensive and time consuming to set up
ISA 600 deals with the use of the work of an expert by the auditor
The auditor may not have the expertise to make judgements on all aspects of a clients business and may seek help in the form
of an expert.
Examples of this are specialist inventory, property valuation and complex work in progress.
If an expert in the inventory of the entity being audited is consulted on valuation of inventory, but works for a subsidiary
of the entity then the auditor may consider them to be not sufficiently independent
Before any work is performed by the expert the auditor should agree in writing:
1. Nature, scope and objectives
2. Roles and responsibilities
3. Nature of communication
4. Confidentiality of expert
So we look at:
Whether the internal audit staff are sufficiently independent to retain objectivity
The professionalism of the staff and the standing of internal audit within the organisation
If these considerations are fulfilled the auditor may assess the reliability of the work carried out by internal audit by
ensuring:
Internal audit working papers are well documented and have been reviewed
If all of the above is satisfied the auditor may choose to place reliance on some of the work of internal audit.
Remember that although they may use some of the work of internal audit as evidence, the responsibility for the final opinion
will always lie with the external auditor.
Not-for-Profit Organisations
How is the Audit Different?
Audit Implications
Value for money audits (see earlier)
Reporting
If required by law = Normal audit report
If voluntary = Reflect objective of audit
1. Addressee
2. Scope
3. Responsibilities of auditors & managers
4. Work done
5. Opinion
6. Date, name and address of auditor
Review
Subsequent events
Purpose of a Subsequent Events Review
Auditors are responsible for their audit work from Y/E to issuing of FS
Active Duty
Between the Y/E and signing the FS
Passive Duty
Between the signing and issue date
To act if they become aware of anything that may affect their audit opinion
Subsequent events are events which occur after the balance sheet date
Review post Y/E management accounts, budgets and cash flow forecast
Review how management assess subsequent events and ask if any have been found
Adjusting Events
Adjusting
Events which require the FS to be adjusted to provide a true and fair view
Non-Adjusting
Events which do not require the FS to be adjusted to provide a true and fair view
Adjusting Events
1.
These provide additional evidence relating to conditions existing at the balance sheet date
2. An example is:
Inventory sold after the year end below cost
This provides evidence that the valuation of inventory at the Y/E was incorrect.
3.
Non-Adjusting Events
1.
3.
A Sexy Diagram
Going Concern
Going Concern Responsibilities
Going concern is defined under IAS 1 as the assumption that the company will continue in operational existence for the
foreseeable future
2. Use of Judgement
GC involves the use of judgement on the basis of the information available at the time
3. Break up basis
This is when GC basis is not appropriate
Director's Responsibility
They must assess going concern
They should use a suitable basis on which to base the going concern
They should use information on sources of finance, future profitability and repayment of debt
If the directors have any material uncertainties as to the going concern of the business they must disclose them in the financial
statements.
Auditors Responsibility
They must assess the appropriateness of the going concern assumption
If there are going concern issues, the auditor must ensure that sufficient disclosures are made
Management Responsibility
Auditor Responsibility
Going concern is vital as the FS must show a true and fair view
The auditor will undertake a number of procedures in the going concern review:
Look at the economic conditions of the industry at that time
Review post Y/E cash flow statements, management accounts and budgets
If GC is appropriate
No need to mention GC in their report
If GC not appropriate
Qualify the audit report
Insufficient Disclosure
Qualify the audit report
Written Representations
Management Representations
The ISAs require the auditor to obtain management representations on certain specific issues
auditor is unable to obtain sufficient appropriate evidence to confirm a balance because the evidence does not exist
4 Steps
1. Auditor lists the areas we need representations on
2. Auditor prepares the representation & sends it to management
3. Management review & sign
4. Auditor files it in the working papers
Potential Problems
1. Management Integrity Issues
One extreme is to resign but at least modify the audit opinion to explain the reliability issue of their representation
ISA 220 sets out that the quality review should consider the planning, supervision and review of the audit in determining
whether quality standards have been met.
During the audit it is likely that the auditor will come across errors in the financial statements.
The auditor should keep a list of these throughout the audit and report them to management
The 4 Reviews
1. Engagement Partner Review
Main focus here is Quality Control
It is a review of the audit work - not the evidence - so just ensuring proper standards and procedures followed
3. Documentation Review
Evidence that independence issues have been considered
Has a memo been produced with points to be considered on next year's audit?
Evaluation of Misstatements
Misstatements aren't just monetary figures, they could also be incorrect classification or disclosures
Evaluating Misstatements
1. Get a list of misstatements found
2. Discuss these with management at the end of the audit
3. Management will normally correct these
4. Any remaining material misstatements will cause the auditor to qualify the report
If management amend material errors, then the auditor will issue an unqualified audit report
If management refuse to adjust the errors then the auditor must persuade them to do so or issue a qualified audit report
Reporting
Audit reports
Structure of an Unmodified Audit Report
2. Addressee
The shareholders i.e. for whom the report is produced.
Application of accounting policies and estimates as well as responsibilities for systems and controls
The audit was planned and assessed the risk of material misstatement considering internal controls and obtaining
sufficient appropriate evidence
5. Scope Paragraph
Standards under which the audit was conducted, the processes and the test basis as well as the appropriateness of
policies and disclosures
6. Opinion
Do the statements present a true and fair view? Are they prepared according to applicable GAAP and legislation?
7. Auditors signature
Auditor or firm is registered and authorised to conduct the audit.
9. Auditors address
1. Advantages:
Potential to limit liability exposure
Clarifies extent of auditors responsibility
Reduces expectation gap
Manages audit firms risk exposure
2. Disadvantages:
Each legal case assessed individually no evidence that a disclaimer would offer protection in all cases
May lead to reduction in audit quality
Audit Opinion
If the auditor disagrees with some aspect of the financial statements or is unable to state that they provide a true and fair view,
then a modified audit report will be issued
Emphasis of matter
If the auditor wishes to draw attention to a particular matter, but agrees with the financial statements an emphasis of
matter paragraph will be included in the audit report.
The matter referred to will be fully disclosed in the accounts and the auditor is simply drawing the users attention to it.
The paragraph will make it clear that the opinion is not qualified and will be given a separate heading after the opinion
paragraph.
Qualified Reports
There are two reasons that an auditor may qualify an audit report:
1. Disagreement
2. Insufficient Evidence
Disagreement
A qualified report for the reason of disagreement will be issued if the auditor disagrees with the application of accounting
policies, the policies used, treatment of a particular item or the adequacy of disclosures
Insufficient Evidence
If the auditor is unable to form an opinion, then the report will be qualified for Insufficient Evidence
Insufficient Evidence will be due to being unable to obtain sufficient evidence which should have been available.
Emphasis of Matter
This refers specifically to matters in the FS
Other Matters
This refers to anything else the auditor may wish to bring to the users attenion
Emphasis of matter
Other matter
What is it?
Where does
it go?
Headed
how?
Emphasis of matter
Other matter
Key points?
Effect on
opinion?
None
None
Example
Reports to Management
Management Letters
Often times the auditor does not sufficiently communicate these matters and such problems include:
No outline of weaknesses in internal controls or assessment of potential effects
The report to management takes the form of either a formal report or a letter