Professional Documents
Culture Documents
Cirugia
Cirugia
Orthodontic Contribution to
Orthognathic Surgery Cases
Nikolaos Topouzelis
Aristotle University of Thessaloniki, Dental School
Greece
1. Introduction
Skeletal malocclusion (dysgnathia) is defined as the congenital or acquired abnormal
position or morphology of one or both jaws. There might be symmetry or asymmetry with
disruption of the maxillomandibular relationship or the relationship of the jaws to the skull
base combined with malocclusion or joint disruption. The main treatment objectives for
serious skeletal malocclusions are aesthetic, functional and psychological rehabilitation. For
this kind of cases these goals may be achieved. The orthodontist can move teeth and alveoli
but this has no substantial impact on the adult basal jaw bone. The main orthodontists task
is teeth alignment. The oral & maxilofacial surgeon is responsible for the surgical correction
of jaws and their associated structures. Generally speaking, the diagnosis and treatment
plan of orthognathic cases require a systematic team approach. Although team member
composition may differ depending on conditions at any given time, an ideal team should
include an orthodontist, a maxillofacial surgeon, a phychiatrist or a clinical phychologist, a
prosthetologist and a specialised dental technician. Orthognathic surgery involves risks and
this is why we need to proceed with it only after careful planning. It is particularly
important to understand the patients view; this establishes trust and communication and
helps achieve high quality results.
The management protocol for dentofacial abnormalities, treated through the cooperation of
orthodontics and orthognathic surgery involves taking detailed medical and dental history
of the patient, clinical examination, casts analysis, photographs, radiographs analysis
(leading to diagnosis and treatment plan), presurgical orthodontics, actual surgery and postsurgical orthodontics.
2. Medical history
Taking a comprehensive medical history is of the utmost importance. Most orthognathic
patients are young individuals and their health normally allows then to undergo general
anaesthesia and extensive surgery. However, there are specific disorders, such as blood
diseases (coagulation disorders), hormonal disorders, heart diseases, allergies, rheumatic
diseases, respiratory diseases (sleep apneoa), which require special treatment (Harris &
Hunt, 2008).
Very serious facial disproportions might be associated with systemic diseases, such as
acromegaly (Class III cases) or chronic juvenile arthrities and muscular dystrophy (Class II
www.intechopen.com
356
cases with open bite). Such medical problems complicate orthognathic treatment and may
lead to a generally unstable result if not sufficiently controlled. Furthermore, patients
psychological assessment is essential so as to ensure that their expectations are realistic.
Besides, the case of dysmorphobia should be examined, because such patients are totally
unsuitable for orthognathic treatment, as they are bound to be disappointed by the result
(Winchester & Young, 2007).
3. Dental history
When taking the patients dental history, existing teeth should be recorded and any caries or
periodontal problems identified and treated before orthodontic treatment and orthognathic
surgery, in coooperation with specialised dentists. However, there might be problems such
as missing teeth which would be better treated after orthognathic surgery. Orthodontic
intra-oral examination must include: a) assessment of static and functional occlusion and
dental base relationships in the three spatial dimensions. It is important to check and record
if there are extreme lateral or protrusive mandibular movements along the mandible
elevation path, in cases of anterior or posterior cross-bite and in cases of disruption of the
relationship between the upper and lower midline or the relationship between the upper
and lower midlline the midline of the face; b) the presence of tooth spacing or crowding in
relation to possible tooth size or morphology disorders; c) the presence of tooth
displacement or rotation; d) the presence of anterior teeth inclination, since upper incisors
become apparent when they are labially inclined, while lower incisors become apparent in
patients with Class III skeletal dyscrepancy when these teeth are lingually inclined; e)
checking incisal overbite and overjet. In cases of open bite, it should be checked whether
there is a step at the occlusal plane in the upper arch and the anterior teeth are positioned
higher than the lower ones; f) occlusal plane disorders, which are checked in the
anteroposterior and vertical dimensions using the curve of Spee and in the transverse
dimension using the curve of Wilson, which assesses the buccal-lingual position of the
occlusal surface of posterior upper and lower teeth; g) the morphology of the dental arches
and the palate. In cleft cases, a careful analysis of their type and extension is necessary as
well as an examination of bone deficits that require grafts (Harris & Hunt, 2008); h) tongue
assessment. A sizeable tongue (macroglossia) may lead to dental and skeletal problems and
undermine the stability of the outcome of the orthodontic and orthognathic treatment; it
may also cause problems with mastication, speech and breathing; i) examination of tonsil
size, since their excessive size may cause respiratory problems; j) recording problems related
to masticatory muscles and the temporomandibular joint, so that if related problems appear
after treatment, there will be no confusion as to whether they preexisted or not; if possible,
such problems should be dealt with before treatment starts. It is important to advise patients
to ensure they fully comprehend that orthognathic surgery takes place so as to correct
dento-mandibular disorders and its impact on a preexisting temporomandibular
dysfunction is unpredictable; in fact the problem may be exacerbated postoperatively
(Onizawa et al., 1995).
www.intechopen.com
357
www.intechopen.com
358
gonion should be more or less equal to the distance between the lateral canthi of the eyes
(Sarver et al., 2003).
Dentolabial relationships play an important role in facial aesthetics and they should be
assessed at a resting position as well as in function while the patient is smiling. The visible
part of the teeth and gingivae under the upper lip is important when making a decision
concerning maxillary depression or lower maxillary repositioning. At rest, 2-3 mm of the
incisors should be visible. Higher figures, up to 5 mm, have also been proposed (Arnett &
Bermann, 1993a, 1993b) following the rationale that more exposure of the teeth is acceptable
among women than among men. When laughing, the whole of the central incisor up to the
level of marginal gingivae should be visible or even including 1-2 mm of the attached
gingivae. More extensive exposure of the attached gums is more acceptable among women
than among men. (Guariglia & Ronchi, 2005).
4.2 Profile clinical examination
When examining the face from its side view, what is first reviewed are, again, the previously
referred vertical proportions (Fig. 2) and any balance and harmony problems in the sagittal
dimension.
Fig. 2. Vertical proportions and reference lines for facial profile assessment
The nose and its features are also examined because nasal appearance may often undergo
related and anatomical alterations in many osteotomies. So, in a Le Fort I osteotomy,
maxillary impaction will tend to elevate the tip of the nose and restrict the nasal hump.
What should also be assessed is the nasolabial angle; higher values tend to be more
acceptable among women, while lower values among men. An acute nasolabial angle may
be associated with maxillary hypoplasia and, therefore, may be improved with surgical
maxillary protrusion. Controlling maxillary and mandibular protrusion or retrusion is
assessed with two vertical lines. The first line goes through the most prominent part of the
forehead (Fig. 2) and the second line goes through the soft tissue nasion. In a harmonious
face, the end of the lips should touch the first line while maxillary soft tissues should be
about 2-3 mm anterior to the second line and the chin should be 2 mm posterior to the
second line (Winchester & Young, 2007).
In cases of sagittal disorder of the maxillomandibular relation, differential clinical aetiology
diagnosis may become apparent in Class III cases, by filling the upper lip with soft wax or
cotton (Fig. 3) until the relationship between the lips and the facial profile approximates
what is considered normal. Similarly, surgical correction of a retruded mandible may be
represented by asking the patient to slide the mandible forward.
www.intechopen.com
359
Fig. 3. Change in the facial profile after filling the upper lip with cotton
The submental region should be examined to check for the presence of excessive fat or a
double-chin appearance, which is often associated with a short neck. Sometimes,
mandibular set back may enhance this subcutaneous tissue deposit. This may be a contraindication for mandibular set back or may make liposuction or plastic surgery necessary.
However, among young patients, the submental region is usually spontaneously contoured
after the operation.
5. Laboratory examinations
5.1 Casts
Casts should represent all the teeth that are present, the alveolar processes, the frenulums
and the grooves (gingivolabial, gingivo-buccal, gingivolingual). The bases of the casts are
trimmed in the intercuspal or central occlusion position, with the help of the corresponding
bite records. The casts provide the best data for the assessment of dental problems and static
occlusion. Initially they are examined separately in regard to arch shape (parabolic,
triangular, square), rotations, deviations and ectopic and infraoccluded teeth. Crowding or
spacing is evaluated through the correlation of dental width and the alveolar bone available.
The symmetry between the left and right half in the upper and lower dental arches in all
three dimensions is assessed, since there might be asymmetries at the vertical level that
concern teeth, groups of teeth or the whole of the dental arch, causing an inclination to the
transverse occlusal plane. The orientation of the occlusal plane is assessed on the basis of the
curve of Spee in regard to the anteroposterior dimension, and on the basis of the curve of
Wilson frontally (Fig. 4). In cases of posterior cross-bite with an increased curve of Wilson, it
is very difficult or impossible to achieve proper occlusion with orthodontic, orthopaedic or
even surgical maxillary expansion. The solution for such cases is maxillary expansion with
multiple section osteotomies. Buccal inclination of posterior lower teeth is often associated
with macroglossia or tongue protrusion (Wolford et al., 2004).
www.intechopen.com
360
Assessment of the width of the upper and lower dental arches is performed by measuring
the inter-canine, inter-premolar and inter-molar distances and comparing them with the
recommended normal values, which, however, is purely indicative in nature and changes
depending on race and an individuals size. Disorders in the transverse plane affect
preoperative orthodontics and determine the surgical treatment necessary. A practical way
to reveal width discrepancies, as well as upper and lower arch discrepancies in general, is to
mount the casts manually, so that the first molars are in Class I malocclusion.
Casts help us perform Bolton analysis, which is a method that compares the magnitude of
the mesio-distal dimension of the upper and lower teeth. It may concern the anterior teeth
or the whole set of teeth of the two arches. If there are discrepancies in tooth width,
alignment and intercuspation are obstructed. Such disorders are usually caused by small
upper lateral incisors or wide lower ones. Along with Bolton analysis, one should take into
account the incisors labiolingual width and their axial inclination. Assessing tooth size
discrepancies is very important because this is also a factor determining the goals of
presurgical orthodontics and surgical treatment. An even more accurate assessment is
possible with a diagnostic wax set up on the casts.
A pair of casts is mounted on an anatomical articulator with facebow record, although a
hinge articulator might be suitable for cases that require only mandibular surgery. The need
to mount casts during the initial stages of treatment planning is a controversial issue, but
may be necessary if maxillary impaction is being planned, so as to define the effect of
mandibular autorotation. In cases of significant displacement, it might also be useful to
mount casts in central occlusion so as to help treatment planning. In most cases, however, it
is sufficient to use manual mounting of casts so as to determine arch intercuspation,
avoiding the need of a facebow record (Winchester & Young, 2007).
5.2 Photographs
Photographs are an auxiliary tool for the clinical examination and cephalometry when
investigating the aesthetic and functional restoration of the dentition and the face. Initially,
two frontal photographs should be taken, one with the lips at rest position and one with the
person laughing; then a photograph of the face and a profile photograph should taken. In
cases of asymmetries, it would be useful to take photographs of both profiles. In order to
make better use of extra-oral photographs, hair, beard and moustache should be removed
from the face. Intra-oral photographs should include anterior teeth and the left and right
buccal segments parts in occlusion as well as photographs of the occlusal surfaces of the
upper and lower arch using a mirror. Photographs sometimes provide a more objective
view than clinical examination, particularly in cases of asymmetry. Photographs should be
taken before and after surgery to help the intervention or to serve teaching purposes; rarely,
they might also be used for medico-legal purposes.
5.3 Radiographs
In order to plan an orthognathic case, it is necessary to have a panoramic and a lateral
cephalometric radiograph. The overview of the panoramic radiograph indicates the
presence of pathological conditions, such as impacted teeth that have not erupted,
congenitally missing teeth or supernumerary teeth, caries, periodontal disease, apical lesions
or cysts as well as the inclination or course of dental roots. The panoramic radiograph
provides images of various forms of the mandibular open or closed angle as well as the
www.intechopen.com
361
relative position, morphology and integrity of the condyles (Fig. 5). In cases of
condyledamage, the radiograph should be complemented by axial tomography or even
three dimensional scans of the temporomandibular joint (3 - dimensional CT scan) (Kapila et
al., 2011). Periapical radiographs are useful for a more accurate evaluation of inter-root
spaces, when inter-dental osteotomies are to be performed. An occlusal radiography is often
useful to clarify regions with a particular pathology, e.g. in order to locate the position of
impacted teeth and to determine bone deficits in cleft cases.
www.intechopen.com
362
jaw relationships with the cranial base and each other, the relationships of teeth with each
other and their corresponding bone bases and the relationships of soft tissues in the profile
view of the face. Measurements performed concern the maxilla, the mandible, the teeth and
soft tissues.
5.3.1.1 Maxillary measurements (Fig. 6)
1. The S-N-A Angle: this provides an indication about the anteroposterior position of the
maxillary base in relation to the anterior cranial base. Its normal value is 822 for men and
812 for women. A high value indicates a protruding maxilla, while a low one a retrusive
maxilla. 2. The angle formed by the Frankfurt plane and the line defined by the nasion and
point A. This is called maxillary depth and its mean value is 903. This angle indicates the
anteroposterior position of the maxilla in relation to the horizontal plane. Skeletal Class II
type caused by the maxilla presents values over 90, while, Class types present lower
values. This angle also presents lower values in cases of palatal clefts. 3. The distance of
point from the McNamara line (drawn through point perpendicularly to the horizontal
Frankfurt plane): this indicates the position of the maxilla in relation to the anterior part of
the skull and, normally, point A lies near this line. Values above +3 mm indicate maxillary
protrusion, while values under 3 mm indicate maxillary retrusion. Anteroposterior
maxillary assessment should also take into account that the position of point A is affected by
potential alveolar protrusion and by any pronounced inclination of the upper incisors. 4.
The -CF-A Angle (CF is the intersection point of the Frankfurt plane with the PTV plane).
This is called maxillary height and its mean value is 563. It indicates the vertical position
of the maxilla in the face. In cases of skeletal open bite caused by the maxilla, the values of
this angle are low, which indicates a short upper face.
5.3.1.2 Measurements concerning the mandible (Fig. 6)
1. The S-N-B Angle. This indicates the anteroposterior position of the mandible in relation to
the anterior base of the skull. Its normal value is 802 for men and 782 for women. A high
value indicates a protruding mandible, while a low value a retrusive one. It should be taken
into account that the values of the S-N-A and S-N-B angles are influenced by the inclination
and lenght of the anterior cranial base S-N. 2. The facial angle, formed by the Frankfurt
plane and the facial plane -Pg. Its mean value is 903. This angle assesses the
anteroposterior position of the mandible and determines whether a skeletal Class II or III is
caused by the mandible. 3. The distance of point Pg from the vertical line going through
point N. This indicates the anteroposterior position of the mandible in relation to the base of
the skull. Normally, its values range from -4 mm to 0 mm for individuals of medium facial
size (McNamara, 1984). Among adults, point Pg usually lies 2 mm behind this line. Values
under 5 mm indicate a retrusive mandible, while values above +3 mm indicate a protrusive
maxilla (Stroud, 1997). 4. The angle formed by the mandibular plane (Go-Me) and the
Frankfurt plane. This is the FMA Angle of Tweed. Its mean value is 254. This angle
provides an indication as to the vertical height of the mandibular ramus and the posterior
facial height. This measurement indicates the vertical type of the face. An open angle
indicates a long face and, in cases of skeletal anterior open bite, that it is caused by the
mandible. On the contrary, a closed angle indicates a short type of face and in cases of
skeletal deep bite this is caused by the mandible. A high value indicates a long and narrow
face with narrow dental arches. On the contrary, patients with a small angle tend to have a
relatively high posterior facial height and increased activity of the masticatory muscles.
Furthermore, they have a tendency for an overbite and muscular spasm particularly of the
www.intechopen.com
363
temporalis and the medial pterygoid muscle, predisposing for TMJ problems (Chaconas &
Gonidis, 1986).
www.intechopen.com
364
every relative length of the maxilla of a specific individual, there is one relative length of the
mandible within a given width. This relationship also takes into account the vertical
dimension, as this is defined by the anterior lower facial height (ANS-Me) (Fig. 6). In other
words, what is characteristic about the McNamara method is the presence of the triangle
formed by the maxilla, the mandible and the anterior lower facial height and their
interrelationship as shown in the tables of composite values resulting from the combination
of the three cephalometric samples (Table 1). So, the "originality" of this method lies in the
fact that it directly correlates maxillary and mandibular lengths with lower facial height,
regardless of the gender or the age of an individual. This leads to a useful combination of
measurements with the substantial advantage of using it for diagnostic and therapeutic
purposes in cases of skeletal problems, particularly when a combination of orthodontic
treatment and orthognathic surgery is required (Sinclair & Proffit, 1991).
5.3.1.4 Measurements concerning dental relations (Fig. 7)
1. The angle formed by the lognitudinal axis of the upper incisor and the palatal plane
(1/ANS-PNS). Its mean value is 1095. In cases of Class III dentoalveolar disorder, this
angle often presents increased values, since the incisors have an increased labial inclination
in order to compensate for or alleviate the malocclusion present. 2. The angle formed by the
lognitudinal axis of the upper incisor and the anterior cranial base (1/S-N). Its mean value is
1032. This angle becomes particularly significant in cases when the palatal plane is to
surgically change inclination, as in some open bite cases. In these cases, its coassessment
with Angle 1/ANS-PNS indicates to the orthodontist the necessary preoperative movement
of upper incisors. 3. The distance of the labial surface of the upper incisor from a vertical line
going through point A and drawn so as to be parallel to the vertical line going through the
nasion. This measurement determines the anteroposterior position of the upper incisor in
relation to the mandible. Its mean value is 4-6 mm. Upper incisor positions more posterior
than 1 mm to this line are considered to be lingual positions, while upper incisors situated
more than 7 mm anterior to this line are prominent incisors. 4. The angle formed by the
lognitudinal axis of the lower incisor and the mandibular base plane ( /Go-Me). Its mean
value is 905. This angle indicates the anatomical position of the lower incisor in relation to
the base of the mandible. A reduced value of this angle is almost always encountered in
Class III malocclusion cases, as a compensatory factor. However, in cases of Class II
malocclusion, this angle is increased (Guariglia & Ronchi, 2005). 5. The angle formed by the
lognitudinal axis of the lower incisor and the dentoalveolar plane A-Pg ( /A-Pg). Its mean
value is 224. This angle indicates the inclination of the lower incisor in relation to the
www.intechopen.com
365
dentoalveolar plane A-Pg and it adapts to the facial skeletal type; it is increased in short
facial types and decreased in long types. 6. The distance of the lower incisal edge from the
dentoalveolar plane A-Pg ( A-Pg). Its mean value is 2.4 mm2 and it indicates the
projection of the lower incisor. Incisors lying more than 5 mm in front of the line are
protruding, while incisors behind the line are retrusive. 7. The distance of the lower incisal
edge from the occlusal plane. Its mean value is 1.25 mm2 and it indicates overeruption of
the lower incisor; it shows whether the abnormal deep bite is due to theintrusion
orextrusion of the lower or upper incisor (Ricketts, 1982). 8. The distance of the upper incisal
edge from the palatal plane (1 ANS-PNS). Its mean value is 33 mm3 and it indicates the
anterior dentoalveolar height. 9. The distance of the lower incisal edge from the mandibular
plane ( Go-Me). Its mean value is 44 mm2 for men and 40 mm2 for women. It indicates
the lower anterior dentoalveolar height. It should be noted that these measurements of the
anterior upper and lower dentoalveolar height reflect aspects of the lower height of the face.
In other words, if the anterior lower height of the face is increased, then the upper and lower
anterior dentoalveolar height will also be increased, with the exception of some open bite
cases. (Hunt, 2008a). 10. The distance of the tip of the medial cusp of the lower first molar
from the mandibular plane ( 6 Go-Me). Its mean value is 38 mm3 and it indicates the
posterior lower dentoalveolar height. 11. The distance of the tip of the medial cusp of the
upper first molar from the palatal plane (6 ANS-PNS). Its mean value is 28 mm3 and it
indicates the posterior upper dentoalveolar height. Low values of the upper and lower
posterior dentoalveolar height might indicate ankylosis or eruption failure. On the contrary,
high values indicate supraeruption and are blamed for skeletal anterior open bite
(Langlande, 1986). 12. The angle formed by the occlusal plane and the horizontal Frankfurt
plane. The occlusal plane is defined by points corresponding to the middle of the
overlapping of the cusps of premolars and molars. Mean angle value is 84 and it indicates
the inclination of the occlusal plane. This plane is very important from a functional point of
view, in relation to mandibular movement. Along with the anterior and posterior decisive
factors for occlusion, it determines how teeth get disengaged (Stroud, 1997). The occlusal
plane has a significant impact on function and aesthetics, particularly in cases of bimaxillary
osteotomy (Wolford, 2007).
5.3.1.5 Measurements concerning facial soft tissues (Fig. 8)
1. The ratio of the middle third to the lower third of facial soft tissues is 1:1. The middle
third is the distance determined by points Gs (the most anterior part of the forehead
corresponding to the glabella) and Sn (the most posterior point of the nasal base, where it
joins the upper lip). The lower third is the distance defined by points Sn and Mes (the lowest
point of chin soft tissues). In most orthognathic surgery patients, abnormalities are located
in the lower third of the face, which is increased in relation to the middle third, either due to
vertical excess of the posterior maxillary region or due to increased anterior vertical height
of the mandible. In cases of reduced lower third of the face, the cause expected is either
vertical maxillary hypoplasia or reduction of the anterior vertical height of the mandible or
forward rotation of the mandible (Reyneke, 2003). 2. The length and eminence of the nose is
the projection of the Sn - Pn distance on a straight line parallel to the horizontal Frankfurt
plane and going through point Sn. Its mean value is 182 mm. Aesthetically it is more
acceptable for women to have less eminent noses than men (Lines et al., 1978). When
planning maxillary osteotomy, the impact it might have on the nose should be taken into
account. 3. The distance of the subnasal point Sn from point Sts (the lowest point of the
www.intechopen.com
366
upper lip) is the upper lip height. Its normal value is 222 mm in men and 202 mm in
women. If measurements indicate values below normal ones, then the upper lip is short. The
upper lip height is a decisive factor for the vertical dimensions of the lower third of the face,
because it represents one third of this distance and because it is not easy for the upper lip
height to change. This measurement is the basis that can determine the vertical height of the
lower two thirds of the lower third of the face.
www.intechopen.com
367
be considered is not only the anteroposterior position of the chin but also the menton shape
and the mentolabial sulcus. 7. The mentocervical angle, formed by the straight line going
through the most posterior point of the menton (PoS) and the most anterior point of the
lower lip (LL) and a straight line going through the lowest point of the menton (MeS) and
the neck-throat joint point (Thr). The mean value of this angle is 1108. It is more acute in
skeletal Class III cases and less acute in skeletal Class II cases, in which mandibular
disorders are involved. 8. The throat length is the distance between the neck-throat joint
point (Thr) and the lowest point of the menton (MeS). Its mean value is 405 mm. The throat
length is increased in cases of mandibular macrognathia and it is shorter in cases of
mandibular micrognathia. This measurement is useful to ensure differential diagnosis
between anteroposterior mandibular excess and maxillary hypoplasia. The menton-throat
angle and the throat length are of particular importance when planning surgical
anteroposterior shift of the mandible, genioplastic osteotomy (protrusive or reductive) or
submental liposuction. Thus, in individuals with a short throat length and mandibular
protrusion, backward surgical shift of the mandible would be particularly unaesthetic
(Proffit, 1991). To ensure proper assessment of these measurements, radiographs should be
taken in the natural head position. 9. The eminence of the upper and lower lips and the chin
are assessed on the basis of distances of points UL, LL and PoS from a straight line that goes
through point Sn and is perpendicular to the Frankfurt plane. Mean values of these
distances are as follows: 22 mm for the upper lip, 02 mm for the lower lip and -3.52 mm
for the chin (Bass, 1991: Fish & Epker, 1980; Wolford, 1990). The eminence of the lips,
according to Ricketts are the distances of points UL and LL from the aesthetic plane PoS-Pn.
Normally, the lips lie behind the aesthetic plane: the upper lip at 4 mm and the lower lip at 2
mm. These measurements indicate the balance or lack of balance of the soft tissue between
the lips and the nose - chin profile (Ricketts et al., 1982).
5.3.1.6 Cephalometric prediction of surgical orthodontic treatment
Cephalometric prediction of the surgical orthodontic treatment outcome allows the direct
visualization of both dental and skeletal movement and projects the probable post-surgical
patient profile. It can be of assistance to both orthodontists and maxillofacial surgeon in
planning the treatment and to patients in comprehending postoperative changes and, mainly,
the change in the appearance of their faces. Various manual cephalometric methods have been
proposed (Fish & Epker 1980; McNeil et al., 1972; Proffit, 1991; Wolford et al., 1985; Worms,
1976). Manual cephalometric techniques are implemented either using the overlay method or
templates. The overlay method by Proffit (Proffit, 1991) is the simplest prediction method for
mandibular osteotomies; it is restricted to surgeries that do not affect the vertical position of
the maxilla and is not time consuming. These are its stages, in brief (Fig. 9) : a) drawing the
initial cephalometric tracing (CT) and the surgical reference line; b) a second acetate paper is
placed over the initial tracing, so called the overlay tracing; Drawing on the overlay tracing the
skeletal structures that are not going to change during surgery, including the surgical reference
line; c) Movement of the CT mandible backward, on the overlay so as to achieve the desirable
overjet and overbite and the proper intercuspation of posterior teeth. Drawing on the overlay
the lower teeth and the part of the mandible in front of the surgical line; d) Superimposition on
the cranial base and measurement of the backward movement of the lower incisor and skeletal
chin movement; calculation of the predicted position of the lower lip and soft chin, using data
regarding ratios of soft tissue changes relative to respective skeletal movements (the response
of the lower lip represents 60% of skeletal changes, while the chin response is absolute, i.e. 1:1)
www.intechopen.com
368
(Jensen et al., 1992). Measurement of the distance between the surgical reference lines to
determine the surgical movement in millimetres; e) Superimposition at the mandible and
drawing the lower lip outline and the chin; f) Superimposition at the cranial base; drawing the
predicted soft tissue profile. The template method is implemented in all types of osteotomy
and it is very useful in repositioning of the chin and almost necessary when the maxilla is plan
to be moved on the vertical plane. However, the implementation of this method is timeconsuming. In cases of one or two pieces osteotomies, the entire maxilla outline is drawn
while in three-piece osteotomies an outline of the anterior and posterior maxillary pieces and
the mandibular outline are drawn. The mandible rotates around the condyle (Proffit &
Sarver, 2003).
www.intechopen.com
369
surgery candidates are the following (Ricketts, 1982) (Fig. 10): 1. The distance between the
maxilla (zygomatic process) and the frontal facial plane (JR ZR) and (JL ZL). Its mean
value for adults is 151.5 mm and it indicates the left and right width of the maxilla and the
mandible. It determines whether posterior cross-bite is skeletal. High values indicate
skeletal lingual cross-bite, while low values indicate skeletal buccal cross-bite. 2. The angle
formed by the maxillary midline (ANS middle of ZR ZL) and the mandibular midline
(ANS - Me). Its mean value is 02. In cases of asymmetry, this angle determines whether it
is caused by dental or skeletal causes or by functional shift of the mandible. When the two
midlines coincide there is symmetry and they both go through the incisal contact points. 3.
The difference between the height of the occlusal plane at the left and right molars,
measured in relation to the ZR ZL line. Its mean value is 02 mm. Deviation from the
mean value indicates asymmetry accompanied by structural abnormality of the maxilla or
the mandible or both jaws. True skeletal asymmetry accompanied by an inclined occlusal
plane is usually a warning sign for TMJ dysfunction. 4. The difference between the right and
left angles, formed by points ZR-GA-AZ on the right and ZL-AG-ZA on the left. Its mean
value is 02. It indicates the position of the mandible and helps explain the nature of the
asymmetry. Where the difference exceeds 4 it should be examined whether the asymmetry
is of a structural or functional aetiology. These angles are significantly affected by a head
turn on the headrest. Langlande also recommends the use of the distance between point DC
(top of the condyle head) and the corresponding anti-gonion point AG, as well as the
distance between point Me and the corresponding anti-gonion point so as to assess
asymmetry (Fig. 10). These measurements make it possible to judge whether the asymmetry
is due to the ramus or the body of the mandible (Langlande, 1981).
6. Preoperative orthodontics
The goals of preoperative orthodontic treatment are to allow for maximum surgical
correction of the abnormality, to facilitate potential sectional surgical procedures and to
provide the possibility for creating an ideal, stable occlusion (Tompach et al., 1995). The
major part of orthodontic treatment takes place before surgery and might last one and a half
www.intechopen.com
370
to two years (Slavnic & Marcusson, 2010; Diaz et al., 2010). However, there are those who
prefer to leave the major part of orthodontic treatment for after the surgery. Extensive
preoperative treatment and limited postoperative treatment is usually better tolerated by the
patient and provides smoother cooperation (Lee, 1994). The goals of preoperative
orthodontic treatment are achieved with the alignment and flattening of the arches, the
exacerbation of dental relations by removing all dentoalveolar compensation for the skeletal
abnormality and with arch coordination.
6.1 Arch alignment
The first goal of preoperative orthodontics is to align the dental arches or their parts so that
they might be compatible with each other. Correcting crowding and rotations, management of
impacted teeth and arch length discrepancies is mainly a concern of preoperative orthodontics,
because it facilitates arch intercuspation; otherwise, the surgical result would be restricted. If
arch length is to be reduced, and the incisors need to be shifted backwards, then extractions
are performed, as, for example, in Class III cases, when the upper incisors need to be moved
backward or in Class II cases, when the lower incisors have to be moved backward to achieve
exacerbation (Proffit & White, 1991) (Fig. 11). When sectional surgery is being planned, the
deviation of dental roots close to the osteotomies starts with the initial wire and it is monitored
through periapical radiographs. The modern preconstructed brackets of fixed devices and
straight Ni-Ti wires have significantly simplified modern orthodontics. Selecting the slot size is
a matter of personal preference, although the 0.022 inch system can better immobilise
intraoperatively with rigid 19 25 wires. Ceramic brackets are pleasant, because they provide
aesthetic solutions; however, their disadvantage is that they break easily during surgical
manipulations. Most preconstructed bracket systems have been designed to tip the roots of
canines distally and, thus, create sufficient space between them and the roots of lateral incisors.
Fig. 11. A Class II case, with preoperative extractions of the first upper premolars to
manage crowding and to move the upper incisors in order to achieve exacerbation of the
negative overjet, which was completed with labial tipping of the lower incisors
This space is useful in cases where interdental osteotomies are to take place in the maxilla.
When osteotomy incisions are performed distally to the canines, the use of brackets on the
www.intechopen.com
371
contralateral canines warrants that the integrated distal tipping of the brackets keeps the
apices anteriorly and outside surgical incisions (Hunt, 2008b).
6.2 Arch flattening
The planning of dental arch flattening is particularly important. The general principle is that
extrusion is easier postoperatively, while intrusion needs to be completed preoperatively or
intra-operatively. Dental flattening and alignment are ususally a common one-step process
in conventional orthodontics. This is not the case for all surgical cases. When the mandible is
surgically moved forward or backward, the position of the lower incisor is what determines
the lower facial height. In surgical correction of Class , when the lower facial height is
reduced, it is preferable not to correct the curve of Spee in the lower dental arch, either
through orthodontics or surgically. Surgical protrusion of the mandible creates lateral open
bite and a tripod-like occlusal relation; only the last molars and incisors are in an occlusal
relationship. Besides, the lower facial height increases as the chin moves downward. Before
the operation, the teeth are aligned and the anteroposterior relationship of the incisors has
been determined. However, the curve of Spee remains in all wire arches, including the final
stabilising wire (Proffit & Fields, 2007). The lateral open bite is treated with extrusion of the
teeth involved, using vertical elastic forces during postoperative orthodontics. Numerous
clinicians think that 2mm of extrusion in every arch is the maximum that may be achieved
and remain stable without relapse (Hunt, 2008b). If the intentional lateral open bite that
remains after surgery is deemed to be too much, then the curve of Spee will have to be
reduced preoperatively, with the inevitable limitation that the increment of the lower
anterior facial height will be limited postoperatively.
If the incisors are intruded preoperatively in a patient with deep bite, the operation tends to
move the mandible upwards at the chin and downwards in the menton region, due to pivot
effect. This increase of the posterior facial height will stretch the masticatory muscles
(muscular stretching) and this is why it is unstable. However, when the incisors are not
intruded preoperatively, the operation will move the chin downwards and the mandibular
angle upwards, thus causing clockwise rotation of the mandible, which, generally speaking,
is more stable in relation to the anti-clockwise mandibular rotation (Lake et al., 1981). (Fig.
12). On the contrary, when the lower facial height is increased, the pronounced curve of
Spee has to be flattened preoperatively by intrution of the anterior part or surgically
flattened with base osteotomy following sectional orthodontic flattening. Often a combined
operation involving the maxilla is necessary to avoid the downward movement of the
menton angle and further increase of the facial height, which is undesirable. If intrusion is
necessary, the technique of sectional arches is indicated for preoperative orthodontics using
mild forces in the order of 10 - 20 g per tooth, so that root resorption may be avoided,
particularly if the teeth are fine. If this approach leads to lack of dental position control, it is
preferable to have a continuous arch from molar to molar, with an anterior step for the
incisors and canines. Continuous straight arches may achieve flattening, but probably with
undesirable incisor tipping, which can be managed with extractions that allow the posterior
movement of incisors. Surgical flattening is rarely indicated for the lower dental arch (Hunt,
2008b; Levander & Malmgren, 1988). When surgically correcting open bite, in cases of
increased lower facial height, it is preferable not to correct the curve of Spee preoperatively
in the upper dental arch, since multiple section osteotomies are indicated in such cases.
During preoperative orthodontics, the aim is to exacerbate open bite with extrusion of
www.intechopen.com
372
posterior teeth and intrusion of anterior ones. During the operation, the final flattening of
sections takes place, which allows the forward rotation of the mandible. If a one piece Le
Fort I osteotomy is decided, with greater intrusion of the posterior part of the maxilla,
preoperative orthodontic flattening is required, but anterior teeth extrusion should be
avoided before the operation, because even mild orthodontic relapse may cause
postoperative opening of the bite (Proffit & Fields, 2007). The importance of orthodontic
movements of sectional flattening, which are usually unstable, is that it allows an attempt to
minimise postoperative relapse. Following the removal of fixed orthodontic devices, the
intruded incisors tend to infraocclude again and the extruded molars and premolars tend to
intrude once again, thus compensating for the trend of the open bite to recur as a result of
surgical relapse or undesirable growth rotation. (Houston, 1988; Lake et al., 1981). Sectional
flattening is achieved if a step is made preoperatively to the upper wire arch at the occlusal
plane or two lateral and one labial sectional arches are inserted. Other orthodontic devices
that may be used are upper wire arches with increased curve of Spee, lower wire arches
with inversed curve of Spee, inter-arch elastics to extrude posterior teeth, neck-traction
headgear on the upper molars, J-pull headgear on the upper incisors or mini screws in order
to intrude them (Winchester & Young, 2007).
Fig. 12. Schematic representation of a Class II case surgical correction, where there is
reduced lower facial height and the curve of Spee is pronounced. The red colour indicates
chin and menton movements if the incisors are intruded (A) preoperatively and the green
colour indicates what happens if they are not ( ).
6.3 Exacerbation
In serious skeletal discrepancies, the teeth try to maintain some contact, under the effect of
external and internal forces, so as to compensate for the skeletal problem. Although this
compensation improves occlusal relationships and the patients appearance, it restricts the
extent of surgical correction. In skeletal Class cases, the upper incisors are often labially
inclined, while the lower ones are lingually inclined. On the contrary, in cases of skeletal
Class the upper incisors are often upright and the lower labially inclined. A consequence
of these compensatory changes is that the overjet is virtual in regard to the actual magnitude
of the skeletal discrepancy. Preoperative orthodontics aims at exacerbating dental
www.intechopen.com
373
relationships, by removing the camouflage effect and placing the incisors in normal
inclination for the skeletal bases, if this is feasible (Jacobs & Sinclair, 1983). (Fig. 20, 21)
Removing compensation exacerbates the malocclusion preoperatively, but reveals the true
magnitude of the skeletal problem, thus allowing optimal surgical correction without
limitations or occlusal interference. So, if dental compensation from the incisors in Class II,
type 1 cases is removed, twice as much forward movement of the mandible is possible, as
opposed to what would have achieved if the compensation had not been removed.
Similarly, in Class III cases, the mandibular backward movement allowed is five times as
much when compensation is removed. (Fig. 13) (Worms et al., 1976). In Class II, type 1
cases, extractions of the first lower premolars may be performed to achieve exacerbation
(Fig. 13) and Class III inter-gnathic elastic forces may be used. In Class III cases, there is
often a small maxilla with crowding and the upper first premolars might have to be
extracted along with the expansion, so as to achieve exacerbation. Furthermore, in Class III
cases, when the goal is anteroposterior exacerbation, Class II inter-gnathic elastic forces may
be used (Jacobs & Sinclair, 1983). The use of Roths brackets on incisors with increased
crown torque might be an advantage in Class II cases, but undesirable in surgical Class III
cases (Winchester & Young, 2007). The exacerbation extent of the incisors is affected by
postoperative skeletal stability; this means that full and extensive exacerbation might not
always be the goal for a sound surgical outcome. In a Class III case, the exacerbation of the
incisors might lead to such great discrepancy, that two-jaw osteotomy might be required for
correction and a stable postoperative outcome; on the contrary, limited compensation might
only need mandibular surgery. Furthermore, the extent of the exacerbation is restricted in
cases of insufficient alveolar bone, when the roots of the incisors are fine or partly resorbed or
if there are teeth with poor prognosis. When there is a very narrow attached gum zone or thin
periodontium in the lower anterior region, it might be advisable to place a free gum graft
before labial dental movement, so as to avoid resorption of the labial alveolar process and
denuding of the roots (Boyd, 1978). In the case of maxillary depression at different levels, full
exacerbation of the upper incisors is not necessary. The posterior region of the maxilla is
depressed more than its anterior part. The consequence of such surgery is that the incisors are
palatally inclined. So, when orthodontics is performed in this case, preoperative preparation
migth intentionally leave the upper incisors with a slight labial inclination (Hunt N, 2008b).
Fig. 13. A Class II case, where the lower anterior teeth, after extractions of the first lower
premolars, were moved backwards to achieve exacerbation and allow forward surgical
movement of the mandible. During postoperative treatment, Class II elastic forces were
used to support sagittal correction.
www.intechopen.com
374
7. Postoperative orthodontics
The aim of postoperative orthodontics is to bring the teeth to their final positions and secure
balanced occlusion; finally retention planning should be achieved. This phase of the
treatment starts two to four weeks later, after a satisfactory range of mandibular movement
www.intechopen.com
375
has been achieved and there is good bone healing. At first the occlusal splint is removed as
well as the rigid stabilising wires, which are replaced by continuous working wires. This
replacement is quite significant, particularly when there are occlusal surfaces only in two or
three teeth after the splint is removed, which means that proprioceptive stimuli make the
patient try to find a new position with more contact points. This, however, is not desirable
because it might complicate the completion of treatment and the healing of recent
osteotomies. This problem is avoided if teeth are allowed to freely come to full contact
immediately after splint removal. This is better achieved with light, round wires combined
with light, box elastics (Sabri, 2006). Postoperative correction of tripod occlusion with a
pronounced curve of Spee and lateral open bite usually includes a combination of elastic
wire arches with vertical intergnathic elastics and may last slightly longer than usual. When
the upper dental arch is flat, a stable upper rectangular arch is maintained, while an elastic
arch, for example a braided steel wire, may be placed on the lower arch. When both arches
need extrusion, the rectangular arches may be cut and elastics can be applied between the
upper and lower sections (Hunt, 2008b). The elastics are not necessarily vertical, but can
have an anterior or posterior contributing force to support sagittal correction. For
mandibular protrusion Class II elastics should be used (Fig. 13), whereas mandibular
retrusion needs Class III elastics. The orthodontist needs to see the patient every two to
three weeks at this stage, to continue the controlled guidance towards final occlusion
relationships through the elastics and to avoid displacement or deviations of the mandible.
Usually patients wear the elastics continously, even when eating, for the first four weeks,
continuously but not at meal times for the next four weeks and only at night for another
four weeks (Proffit & Fields, 2007). In cases with a predisposition for open bite,
postoperative use of elastics in the buccal sections needs to last the shortest possible time, so
as to avoid opening the bite. The use of elastics is terminated after stable occlusion has been
achieved. In cases when multiple section osteotomies have been performed and the canine
brackets had been preoperatively reversed, it is necessary for them to be reattached, by
placing them in the proper position so as to create the right deviation of their longitudinal
axes. If palatal expansion was performed intraoperatively, postoperative flexible wires
cannot prevent transverse relapse; In order for transverse control to be achieved, a palatal
bar can be used (Winchester & Young, 2007).
The postoperative phase of the treatment needs to be completed within 4-5 months (Slavnic
& Marcusson, 2010) after the operation, because mobilisation and cooperation on the part of
patients dwindle after this period (Kiyak et al., 1984).
8. Retention
Retention is not different from that of usual orthodontic treatment for adult patients. So,
dental movements achieved through preoperative and postoperative orthodontics, need a
retention period that follows the removal of fixed appliances. This allows the alveolar bone
and periodontal tissues to be reinforced. Where incisors rotation has been corrected or large
spaces closed, a fixed, stable, attached lingual or buccal retention mechanism is used. In
other cases, a movable retention appliance may be used (Hunt, 2008b). When surgical or
orthodontic expansion has been achieved, it should be maintained with retention for at least
1 year, because it is usually unstable (Phillips et al., 1992).
www.intechopen.com
376
9. References
Arnett GW, Bergman RT. (1993a). Facial keys to orthodontic diagnosis and treatment
planning. Part I. American journal of orthodontics and dentofacial orthopedics, Vol. 103,
No. 4, pp. 299-312, ISSN 0889-5406.
Arnett GW, Bergman RT. (1993b). Facial keys to orthodontic diagnosis and treatment
planning. Part II. American journal of orthodontics and dentofacial orthopedics, Vol. 103,
No. 5, pp. 395-4ll, ISSN 0889-5406.
Athanasiou AE, Kragskov J. (1995). Computerized Cephalometric Systems. In: Orthodontic
Cephalometry, Athanasiou AE, pp. 231-239, Mosby-Wolfe, ISBN 0 7234 2045 9,
London.
Barber AF, Sims MR. (1981). Rapid maxillary expansion and external root resorption in man:
a scanning electron microscope study. American Journal of Orthodontics. Vol. 79, No.
6, pp. 630-652, ISSN 0002-9416.
Bass NM. (1991). The aesthetic analysis of the face. European Journal of Orthodontics, Vol. 13,
No. 5, pp. 343-50, ISSN 0141-5387.
Baumrind S, Frantz RC. (1971). The reliability of head film measurements. 1. Landmark
identification. American journal of orthodontics, Vol. 60, No. 2, pp. 111-127, ISSN
0002-9416.
Boyd RL. (1978). Mucogingival considerations and their relationship to orthodontics. Journaj
of Periodontology, Vol. 49, No 2, pp. 67-76, ISSN 0022-3492.
Burstone CJ. (1967). Lip posture and its significance in treatment planning. American journal
of orthodontics, Vol. 53, No. 4, pp. 262-284, ISSN 0002-9416.
Chaconas SJ, Fragiskos FD. (1991). Orthognathic diagnosis and treatment planning: a
cephalometric approach. Journal of oral rehabilitation, Vol. 18, No. 6, pp. 531-545,
ISSN 0305-182X.
Chaconas SJ, Gonidis D (1986). A cephalometric technique for prosthodontic diagnosis and
treatment planning. The Journal of Prosthetic Dentistry, Vol. 56, No. 5, pp. 567-74,
ISSN 0022-3913.
Diaz PM, Garcia RG, Gias LN, Aguirre-Jaime A, Prez JS, de la Plata MM, Navarro EV,
Gonzalez FJ.(2010). Journal of Oral and Maxillofacial Surgery. Vol. 68, No. 1, pp. 8892, ISSN 0278-2391.
Eales EA, Newton C, Jones ML, Sugar A. (1994). The accuracy of computerized prediction of
the soft tissue profile: a study of 25 patients treated by means of the Le Fort I
osteotomy. The International Journal of Adult Orthodontics and Orthognathic Surgery,
Vol. 9, No. 2, 141-152, ISSN 0742-1931.
Fish LC, Epker BN. (1980). Surgical-orthodontic cephalometric prediction tracing. Journal of
clinical orthodontics, Vol. 14, No. 1, pp. 36-52, ISSN 1079-5154.
Guariglia A, Ronchi P. (2005). Cephalometry in Dentofacial Anomalies, In: OrthodonticSurgical Treatment of Dentofacial Anomalies, Ronchi P, pp. 35-45, Quintessenza, ISBN
88-7492-101-2, Milan Italy.
Harris M, Hunt N. (2008). General Assessment, In: Fundamentals of Orthognathic Surgery,
Harris M, Hunt N, pp. 1-22, Imperial College Press, ISBN-13 978-1-86094-993-7,
London UK.
www.intechopen.com
377
Houston WJB. (1988). Mandibular growth rotations - their mechanisms and importance.
European Journal of Orthodontics, Vol. 10, No. 4, pp. 369373, ISSN 01415387.
Hunt N. (2008a). Radiographic Analysis and Imaging, In: Fundamentals of Orthognathic
Surgery, Harris M, Hunt N, pp. 23-39, Imperial College Press, ISBN-13 978-1-86094993-7, London UK.
Hunt N. (2008b). Orthodontic Preparation, In: Fundamentals of Orthognathic Surgery, Harris
M, Hunt N, pp. 51-70, Imperial College Press, ISBN-13 978-1-86094-993-7, London
UK.
Jacobs JD, Sinclair PM. (1983). Principles of orthodontic mechanics in orthognathic
surgery cases. American journal of orthodontics. Vol. 84, No 5, pp. 399-407,
ISSN 0002-9416.
Jensen AC, Sinclair PM, Wolford LM. (1992). Soft tissue changes associated with double jaw
surgery. American Journal of Orthodontist and Dentofacial Orthopedics, Vol. 101, No. 3,
pp. 266-275. ISSN 0889-5406.
Kaipatur NR, Flores-Mir C. (2009). Accuracy of computer programs in predicting
orthognathic surgery soft tissue response. Journal of Oral and Maxillofacial Surgery.
Vol. 67, No. 4, pp. 751-759. ISSN 0278-2391.
Kapila S, Conley RS, Harrell WE Jr. (2011). The current status of cone beam computed
tomography imaging in orthodontics. Dentomaxillofac Radiolgy, Vol. 40, No. 1, pp.
24-34, . ISSN 0250-832X.
Kiyak HA, Hohl T, West RA, McNeil RW. (1984). Psychologic changes in orthognathic
surgery patients: a 24 - month follow up. Journal of Oral and Maxillofacial Surgery,
Vol. 42, No. 8, pp. 506-512, ISSN 0278-2391.
Kolokitha OE, Athanasiou AE, Tuncay O. (1996). Validity of computerized predictions of
dentoskeletal and soft tissue profile changes after mandibular setback and
maxillary impaction osteotomies. The International Journal of Adult Orthodontics and
Orthognathic Surgery, Vol. 11, No. 2, pp. 137-154, ISSN 0742-1931.
Kolokitha OE. (2007). Validity of a manual soft tissue profile prediction method following
mandibular setback osteotomy. European Journal of Dental, Vol. 1, No. 4, pp. 202-211.
ISSN 0141-5387.
Lake SM, McNeill RW, Little RM, West RA. (1981). Surgical mandibular advancement: A
cephalometric analysis of treatment response. American journal of orthodontics, Vol.
80, No. 4, pp. 376-394, ISSN 0002-9416.
Langlade M. (1981). Diagnostic orthodontique. Maloine S.A., ISBN 2-224-00738-8, Paris.
Langlade M. (1986). Therapeutique orthodontique. Maloine S.A., ISBN 2-224-00465-6, Paris.
Lee RT. (1994). The benefits of post-surgical orthodontic treatment. British journal of
orthodontics. Vol. 21, No 3, pp. 265-74, ISSN:0301-228X.
Levander E, Malmgren O. (1988). Evaluation of the risk of root resorption during
orthodontic treatment: a study of upper incisors. European Journal of Orthodontics,
Vol. 10, No. 1, pp. 30-38, ISSN 0141-5387.
Lines PA, Lines RR, Lines C. (1978). Profilemetrics and facial esthetics. American journal of
orthodontics, Vol. 73, No. 6, pp. 648-657, ISSN 0002-9416.
www.intechopen.com
378
Liou EJ, Chen PH, Wang YC, Yu CC, Huang CS, Chen YR. (2011). Surgery-first
accelerated orthognathic surgery: postoperative rapid orthodontic tooth
movement. Journal of Oral and Maxillofacial Surgery. Vol.69, No.3, pp. 781785, ISSN 0278-2391.
Luther F, Morris DO, Karnezi K. (2007). Orthodontic treatment following orthognathic
surgery: how long does it take and why? A retrospective study. Journal of Oral and
Maxillofacial Surgery. Vol.65, No.10, pp.1969-1976, ISSN 0278-2391.
McNamara JA. (1984). A method of cephalometric evaluation. American journal of
orthodontics, Vol. 86, No. 6, pp. 449-469, ISSN 0002-9416.
McNamara JA, Brudon WL. (1993). Orthodontic and Orthopedic Treatment in the Mixed
Dentition, pp. 13-54, Needham Press, ISBN 0-9635022-1-2, Ann Arbor USA.
McNamara JA, Ellis E. (1988). Cephalometric analysis of untreated adults with ideal facial
and occlusal relationships. The International journal of adult orthodontics and
orthognathic surgery, Vol. 3, No. 4, pp. 221-231, ISSN 0742-1931.
McNeill RW, Proffit WR, White RP. (1972). Cephalometric prediction for orthodontic
surgery. The Angle orthodontist, Vol. 42, No. 2, pp. 154-164, ISSN 0003-3219.
Miethke R. (1995). Possibilities and Limitations of Various Cephalometric Variables and
Analyses. In: Orthodontic Cephalometry, Athanasiou AE, pp. 63-103, Mosby-Wolfe,
ISBN 0 7234 2045 9, London.
Muller L. (1962). Cephalometrie et orthodontie, SNPMD, ISBN 2-903482-06-3, Paris.
Onizawa K, Schmelzeisen R, Vogt S. (1995). Alteration of temporomandibular joint
symptoms after orthognathic surgery: a comparison with healthy volunteers.
Journal of oral and maxillofacial surgery, Vol. 53, No. 2, pp. 117-121, ISSN 02782391.
Phillips C, Medland WH, Fields HW, Profitt WR, White RP Jr. (1992). Stability of surgical
maxillary expansion. The International Journal of Adult Orthodontics and Orthognathic
Surgery, Vol. 7, No. 3, pp. 139-146, ISSN 0742-1931.
Proffit WR. (1991). Treatment planning: The search for wisdom. In: Surgical Orthodontic
Treatment. Proffit WR, White RP Jr, pp. 142-191. Mosby, ISBN 0-8016-5291-X, St
Louis USA.
Proffit WR, White RP Jr. (1991). Combined Surgical Orthodontic Treatment: Who Does
What, When?. In: Surgical Orthodontic Treatment, Proffit WR, White RP,Jr, pp. 192224, Mosby, ISBN 0-8016-5291-X, St Louis USA.
Proffit WR, Fields HW. (1993). Contemporary Orthodontics Second edition. pp. 607-645, MosbyYear Book, ISBN 0-8016-6393-8, St.Louis USA.
Proffit WR, Sarver DM. (2003). Treatment planning: Optimizing benefit to the patient. In:
Contemporary Treatment of Dentofacial Deformity. Proffit WR, White RP,Jr, Sarver
DM, pp. 172-244, Mosby, ISBN 0-323-01697-9, St.Louis USA.
Proffit WR, White RP, Jr. (2003). Combining Surgery and Orthodontics: Who Does
What, When?. In: Contemporary Treatment of Dentofacial Deformity. Proffit
WR, White RP,Jr, Sarver DM, pp. 245-267, Mosby, ISBN 0-323-01697-9, St.Louis
USA.
Proffit WR, Fields HW. (2007). Contemporary Orthodontics Fourth edition. pp. 686-718, Mosby,
ISBN 13: 978-0-323-04046-4, St.Louis USA.
www.intechopen.com
379
Reyneke JP. (2003). Essentials of Orthognathic Surgery, Quintessence Publishing Co, ISBN 086715-410-1, China.
Ricketts RM, Roth RH, Chaconas SJ, Schulhof RJ, Engel GA. (1982). Orthodontic diagnosis and
planning Vol 1, pp. 127-147, Rocky Mountain /Orthodontics, LCCN 82-62145,
Denver, Colo. U.S.A.
Ricketts RM. (1975). A four-step method to distinguish orthodontic changes from
natural growth. Journal of clinical orthodontics, Vol. 9, No. 4, pp. 208-28, ISSN
1079-5154.
Ricketts RM (1981). Perspectives in the clinical application of cephalometrics. The first
fifty years. The Angle orthodontist, Vol. 51, No. 2, pp. 115-50, ISSN 0003-3219.
Sabri R. (2006). Orthodontic Objectives in Orthognathic surgery: state of the art today. World
Journal of Orthodontics, Vol. 7, No. 2, pp. 177-191, ISSN 1530-5678.
Sassouni V (1958). Diagnosis and treatment planning via roentgenographic cephalometry.
American Journal of Orthodontist, Vol. 44, No. 6, pp. 433-463, ISSN 0002-9416.
Sassouni V. (1971). Orthodontics in dental practise, Mosby, ISBN 8016-4300-7, St Louis USA.
Sinclair PM, Proffit WR. (1991). Class III Problems: Mandibular Excess - Maxillary
Deficiency. In: Surgical Orthodontic Treatment, Proffit WR, White RP, pp. 428-482.
Mosby, ISBN 0-8016-5291-X, St Louis USA.
Slavnic S, Marcusson A. (2010). Duration of orthodontic treatment in conjunction with
orthognathic surgery. Swedish Dental Journal, Vol. 34, No. 3, pp. 159-166, ISSN 03479994.
Stroud LP. (1997). Mounted Study Casts and Cephalometric Analysis. In: Science and Practice
of Occlusion, McNeill C, pp. 331-348, Quintessence Publishing Co, ISBN
9780867153040. Chicago USA.
Tompach PC, Wheeler JJ, Fridrich KL. (1995).Orthodontic considerations in orthognathic
surgery. The International Journal of Adult Orthodontics and Orthognathic
Surgery.Vol.10, No2, pp.97-107, ISSN 0742-1931.
Vion P. (1976). Anatomie teleradiographique en norma lateralis. Revue d'Orthopdie DentoFaciale, Vol. 10, No. 4, pp. 449-537, ISSN 0337-9736.
Winchester LJ, Young DR. (2007). Orthodontic Role in Planning: Clinical Aspects, In:
Maxillofacial Surgery, Booth PW, Schendel SA, Hausamen J-E, pp. 1211-1223,
Churchill Livingstone Elsevier, ISBN-13 978-0-443-10053-6, St. Louis USA.
Wolford LM, Hilliard FW, Dugan DJ. (1985). Surgical Treatment Objective. A Systematic
Approach to the Prediction Tracing, Mosby Year Book, ISBN 9780801656095, St Louis
USA.
Wolford LM, Stevao ELL, Alexander CM, Goncalves JR. (2004). Orthodontics
for Orthognathic Surgery, In: Peterson's Principals of Oral and Maxillofacial
Surgery, Miloro M, Ghali GE, Larsen PE, Waite P, pp. 1111-1134, BC Decker Inc,
ISBN 1-55009-234-0, Canada.
Wolford LM. (2007). Surgical Planning in Orthognathic Surgery, In: Maxillofacial Surgery,
Booth PW, Schendel SA, Hausamen J-E, pp. 1155-1210, Churchill Livingstone
Elsevier, ISBN-13 978-0-443-10053-6, St. Louis USA.
www.intechopen.com
380
Worms FW, Isaacson RJ, Speidel TM. (1976). Surgical orthodontic treatment planning:
prolile analysis and mandibular surgery. The Angle orthodontist, Vol. 46, No. 1, pp.
1-25, ISSN 0003-3219.
www.intechopen.com
ISBN 978-953-307-687-4
Hard cover, 584 pages
Publisher InTech
How to reference
In order to correctly reference this scholarly work, feel free to copy and paste the following:
Nikolaos Topouzelis (2011). Orthodontic Contribution to Orthognathic Surgery Cases, Principles in
Contemporary Orthodontics, Dr. Silvano Naretto (Ed.), ISBN: 978-953-307-687-4, InTech, Available from:
http://www.intechopen.com/books/principles-in-contemporary-orthodontics/orthodontic-contribution-toorthognathic-surgery-cases
InTech Europe
InTech China