INTOSAI GOV 9100 - Guidelines For Internal Control Standards For The Public Sector
INTOSAI GOV 9100 - Guidelines For Internal Control Standards For The Public Sector
INTOSAI
Guidelines for
Internal Control
Standards for the
Public Sector
I NT OS AI P r ofe ss i o n a l S t an d ar ds Co m mi t te e
PSC-Secretariat
Rigsrevisionen Landgreven 4 P.O. Box 9009 1022 Copenhagen K Denmark
Tel.:+45 3392 8400 Fax:+45 3311 0415 E-mail: [email protected]
INTOSAI
EXPERIENTIA MUTUA
EXPERIENTIA MUTUA
OMNIBUS PRODEST
OMNIBUS
PRODEST
Guidelines for
Internal Control
Standards
for the
Public Sector
GUIDELINES FOR
INTERNAL CONTROL STANDARDS
FOR THE PUBLIC SECTOR
ii
G
uidelines for
Internal Control Standards
for the Public Sector
iii
iv
Contents
Preface ................................
Introduction .............................
13
17
22
28
36
40
Examples ......................... 49
Glossary ......................... 57
G
uidelines for
Internal Control Standards
for the Public Sector
Preface
The 1992 INTOSAI guidelines for internal control standards were conceived as a living document reflecting the vision that standards should
be promoted for the design, implementation, and evaluation of internal
control. This vision involves a continuing effort to keep these guidelines
up-to-date.
The 17th INCOSAI (Seoul, 2001) recognized a strong need for updating
the 1992 guidelines and agreed that the Committee on Sponsoring
Organisations of the Treadway Commissions (COSO) integrated
framework for internal control should be relied upon. Subsequent outreach efforts resulted in additional recommendations that the guidelines
address ethical values and provide more information on the general
principles of control activities related to information processing. The
revised guidelines take these recommendations into account and should
facilitate the understanding of new concepts with respect to internal
control.
These revised guidelines should also be viewed as a living document
which over time will need to be further developed and refined to
embrace the impact of new developments such as COSOs Enterprise
Risk Management Framework1.
This update is the result of the joint effort of the members of the INTOSAI Internal Control Standards Committee. This update has been coordinated by a task force set up among the committee members with representatives of the SAIs of Bolivia, France, Hungary, Lithuania, the
Netherlands, Romania, the United Kingdom, the United States of America and Belgium (chair).
1
Introduction
In 2001, INCOSAI decided to update the 1992 INTOSAI guidelines on
internal control standards to take into account all relevant and recent
evolutions in internal control and to incorporate the concept of the
COSO report titled Internal Control Integrated Framework in the
INTOSAI document.
By implementing the COSO model in the guidelines, the Committee not
only aims at updating the concept of internal control, but also attempts
to contribute to a common understanding of internal control among
SAIs. It is self-evident that this document takes into account the characteristics of the public sector. This prompted the Committee to consider
some additional topics and changes.
Compared to the COSO definition and the 1992 guidelines, the ethical
aspect of operations has been added. Its inclusion in the internal control
objectives is justified, as the importance of ethical behavior as well as
prevention and detection of fraud and corruption in the public sector has
become more emphasized since the nineties.2 General expectations are
that public servants should serve the public interest with fairness and
manage public resources properly. Citizens should receive impartial
treatment on the basis of legality and justice. Therefore public ethics are
a prerequisite to, and underpin, public trust and are a keystone of good
governance.
Since resources in the public sector generally embody public money and
their use in the public interest generally requires special care, the significance of safeguarding resources in the public sector needs to be
stressed. Moreover budgetary accounting on a cash basis is still a widespread practice in the public sector but it does not provide sufficient
assurance related to the acquisition, use, and disposition of resources. As
a result, organisations in the public sector do not always have an up-todate record of all their assets, which makes them more vulnerable.
Therefore, safeguarding resources was judged to be an important internal control objective.
Just as internal control in 1992 was not limited to the traditional view of
financial and related administrative control and included the broader
2
concept of management control, this document also stresses the importance of non-financial information.
Because of the extensive use of information systems in all public organisations, information technology (IT) controls have become increasingly
important, which justified a separate paragraph in these guidelines.
Information technology controls relate to each of the components of an
entitys internal control process including the control environment, risk
assessment, control activities, information and communication, as well
as monitoring. However, for presentation purposes, they are discussed
under Control Activities.
The goal of the Committee is to develop guidance for establishing and
maintaining effective internal control in the public sector. Government
management is therefore an important addressee of the guidelines. Government management can use these guidelines as a basis for the implementation and execution of internal control in their organisations.
Since evaluating internal control is a generally accepted field standard in
government auditing3, auditors can use the guidelines as an audit tool.
The guidelines for internal control standards comprising the COSO
model can therefore be used both by government management4 as an
example of a solid internal control framework for their organisation, and
by auditors as a tool to assess internal control. However, these guidelines are not intended as a substitute for INTOSAI Auditing Standards or
other relevant auditing standards.
This document defines a recommended framework for internal control in
the public sector and provides a basis against which internal control can
be evaluated. The approach applies to all aspects of an organisations
operation. However, it is not intended to limit or interfere with duly
granted authority related to developing legislation, rule-making, or other
discretionary policy-making in an organisation.
Internal control in public sector organisations should be understood
within the context of the specific characteristics of these organisations,
3
i.e. their focus on meeting social or political objectives; their use of public funds; the importance of the budget cycle; the complexity of their
performance (that calls for a balance between traditional values like
legality, integrity and transparency and modern, managerial values like
efficiency and effectiveness); and the correspondingly broad scope of
their public accountability.
In conclusion, it should be clearly stated that this document includes
guidelines for standards. These guidelines do not provide detailed policies, procedures and practices for implementing internal control, but
rather provide a broad framework within which entities can develop
such detailed controls. The Committee is obviously not in a position to
enforce standards.
How is this document structured?
In the first chapter, the concept of internal control is defined and its
scope is delineated. Attention is also given to the limitations of internal
control. In the second chapter, the components of internal control are
presented and discussed. The document ends with a third chapter on
roles and responsibilities.
In every section, the main principles are first presented succinctly in a
blue-shaded text box, followed by further background. Reference is also
made to concrete examples, which can be found in the annexes. Also
attached to the document is a glossary containing the most important
technical terms.
Internal Control
1.1 Definition
Internal control is an integral process that is effected by an entitys
management and personnel and is designed to address risks and to provide reasonable assurance that in pursuit of the entitys mission, the
following general objectives are being achieved:
executing orderly, ethical, economical, efficient and effective
operations;
fulfilling accountability obligations;
complying with applicable laws and regulations;
safeguarding resources against loss, misuse and damage.
Internal control is a dynamic integral process that is continuously adapting to the changes an organisation is facing. Management and personnel
at all levels have to be involved in this process to address risks and to
provide reasonable assurance of the achievement of the entitys mission
and general objectives.
An integral process
Internal control is not one event or circumstance, but a series of actions
that permeate an entity's activities. These actions occur throughout an
entitys operations on an ongoing basis. They are pervasive and inherent
in the way management runs the organisation. Internal control is therefore different from the perspective of some observers who view it as
something added on to an entity's activities, or as a necessary burden.
The internal control system is intertwined with an entity's activities and
is most effective when it is built into the entity's infrastructure and is an
integral part of the essence of the organisation.
Internal control should be built in rather than built on. By building in
internal control, it becomes part of and integrated with the basic management processes of planning, executing and monitoring.
Built in internal control also has important implications for cost containment. Adding new control procedures that are separate from existing
procedures adds costs. By focusing on existing operations and their contribution to effective internal control, and by integrating controls into
basic operating activities, an organisation often can avoid unnecessary
procedures and costs.
Effected by management and other personnel
People are what make internal control work. It is accomplished by individuals within an organisation, by what they do and say. Consequently,
internal control is effected by people. People must know their roles and
responsibilities, and limits of authority. Because of the importance of
this concept, a separate chapter (3) is devoted to it.
An organisations people include management and other personnel.
Although management primarily provides oversight, it also sets the
entity's objectives and has overall responsibility for the internal control
system. As internal control provides the mechanisms needed to help
understand risk in the context of the entitys objectives, the management
will put internal control activities in place and monitor and evaluate
them. The implementation of internal control requires significant management initiative and intensive communication by management with
other personnel. Therefore internal control is a tool used by management and directly related to the entitys objectives. As such, management is an important element of internal control. However, all personnel
in the organisation play important roles in making it happen.
Similarly, internal control is affected by human nature. Internal control
guidelines recognize that people do not always understand, communicate or perform consistently. Each individual brings to the workplace a
unique background and technical ability, and has different needs and priorities. These realities affect, and are affected by, internal control.
In pursuit of the entitys mission
Any organisation is primarily concerned with the achievement of its
mission. Entities exist for a purpose the public sector is generally concerned with the delivery of a service and a beneficial outcome in the
public interest.
To address risks
Whatever the mission may be, its achievement will face all kinds of
risks. The task of management is to identify and respond to these risks
in order to maximize the likelihood of achieving the entitys mission.
Internal control can help to address these risks, however it can only provide reasonable assurance about the achievement of the mission and the
general objectives.
Provides reasonable assurance
No matter how well designed and operated, internal control cannot provide management absolute assurance regarding the achievement of the
general objectives. Instead, the guidelines acknowledge that only a reasonable level of assurance is attainable.
Reasonable assurance equates to a satisfactory level of confidence under
given considerations of costs, benefits, and risks. Determining how
much assurance is reasonable requires judgment. In exercising that judgment, managers should identify the risks inherent in their operations and
the acceptable levels of risk under varying circumstances, and assess risk
both quantitatively and qualitatively.
Reasonable assurance reflects the notion that uncertainty and risk relate
to the future, which no one can predict with certainty. Also factors outside the control or influence of the organisation can affect the ability to
achieve its objectives. Limitations also result from the following realities: human judgment in decision making can be faulty; breakdowns can
occur because of simple errors or mistakes; controls can be circumvented by collusion of two or more people; or management can override
the internal control system. In addition, compromises in the internal control system reflect the fact that controls have a cost. These limitations
preclude management from having absolute assurance that objectives
will be achieved.
Reasonable assurance recognizes that the cost of internal control should
not exceed the benefit derived. Decisions on risk responses and establishing controls need to consider the relative costs and benefits. Cost
refers to the financial measure of resources consumed in accomplishing
a specified purpose and to the economic measure of a lost opportunity,
such as a delay in operations, a decline in service levels or productivity,
10
11
12
CControl
omponents of Internal
control environment
risk assessment
control activities
information and communication
monitoring
13
14
Similarly, looking at the general objectives, all five components are relevant to each objective. Taking one objective, such as effectiveness and
efficiency of operations, it is clear that all five components are applicable and important to its achievement.
Internal control is not only relevant to an entire organisation but also to
an individual department. This relationship is depicted by the third
dimension, which represents entire organisations, entities and departments. Thus, one can focus on any of the matrix's cells.
While the internal control framework is relevant and applicable to all
organisations, the manner in which management applies it will vary
widely with the nature of the entity and depends on a number of entityspecific factors. These factors include the organisational structure, risk
profile, operating environment, size, complexity, activities and degree of
15
16
17
of conduct at all times. For example, this can include the disclosure of
personal financial interests, outside positions and gifts (e.g. by elected
officials and senior public servants), and reporting conflicts of interest.
Also, public organisations have to maintain and demonstrate integrity
and ethical values, and they should make those visible to the public in
their mission and core values. In addition, their operations have to be
ethical, orderly, economical, efficient and effective. They have to be
consistent with their mission.
Commitment to competence
Commitment to competence includes the level of knowledge and skill
needed to help ensure orderly, ethical, economical, efficient and effective performance, as well as a good understanding of individual responsibilities with respect to internal control.
Managers and employees are to maintain a level of competence that
allows them to understand the importance of developing, implementing,
and maintaining good internal control and to perform their duties in
order to accomplish the general internal control objectives and the
entitys mission. Everyone in an organisation is involved in internal control with his own specific responsibilities.
Managers and their staffs must therefore maintain and demonstrate a
level of skill necessary to assess risk and help ensure effective and efficient performance, and an understanding of internal control sufficient to
effectively discharge their responsibilities.
Providing training, for example, can raise the awareness of public servants of the internal control objectives and, in particular, the objective of
ethical operations, and helps them to understand the internal control
objectives and to develop skills to handle ethical dilemmas.
Tone at the top
The tone at the top (i.e. managements philosophy and operating
style) reflects:
a supportive attitude toward internal control at all times, independence, competence and leading by example;
18
20
Examples
We refer the reader to the annexes for integrated examples on each of
the objectives and the components of internal control.
21
22
As stressed in the definition, internal control can provide only reasonable assurance that the objectives of the organisation are being
achieved. Risk assessment as a component of internal control, plays a
key role in the selection of the appropriate control activities to undertake. It is the process of identifying and analysing relevant risks to the
achievement of the entitys objectives and determining the appropriate
response.
Consequently, setting objectives is a precondition to risk assessment.
Objectives must be defined before management can identify the risks
to their achievement and take the necessary actions to manage those
risks. That means having in place an ongoing process for evaluating
and addressing the impact of risks in a cost effective way and having
staff with the appropriate skills to identify and assess the potential
risks. Internal control activities are a response to risk in that they
are designed to contain the uncertainty of outcome that has been identified.
Government entities have to manage the risks that are likely to have an
impact on service delivery and the achievement of desired outcomes.
Risk identification
A strategic approach to risk assessment depends on identifying risks
against key organisational objectives. Risks relevant to those objectives
are then considered and evaluated, resulting in a small number of key
risks.
Identifying key risks is not only important in order to identify the most
important areas to which resources in risk assessment should be allocated, but also in order to allocate responsibility for management of
these risks.
An entitys performance can be at risk due to internal or external factors
at both the entity and activity levels. The risk assessment should consider all risks that might occur (including the risk of fraud and corruption). It is therefore important that risk identification is comprehensive.
Risk identification should be an ongoing, iterative process and is often
integrated with the planning process. It is often useful to consider risk
from a clean sheet of paper approach, and not merely relate it to the
previous review. Such an approach facilitates the identification of
23
An overview or matrix of the key risks facing an entity or sub-unit that includes the
level of impact (e.g. high, medium, low) along with the probability or likelihood of the
event occurring.
7
Commissioning a risk review
This is a top down procedure. A team is established to consider all the operations and
activities of the organisation in relation to its objectives and to identify the associated
risks. The team conducts a series of interviews with key members of staff at all levels of
the organisation to build a risk profile for the whole range of activities thereby identifying the policy fields, activities and functions which may be particularly vulnerable to risk
(including the risk of fraud and corruption).
Risk self assessment
This is a bottom up approach. Each level and part of the organisation is invited to review
its activities and feed diagnosis of the risks faced upwards. This may be done through a
documentation approach (with a framework for diagnosis set out through questionnaires)
or through a facilitated workshop approach.
These two approaches are not mutually exclusive and a combination of top down and bottom up inputs to the risk assessment process is desirable to facilitate the identification of
both entitywide and activity level risks.
24
25
8
For some risks the best response may be to transfer them. This might be done by conventional insurance, by paying a third party to take the risk in another way, or it might be
done by contractual stipulations.
The ability to do anything about some risks may be limited, or the cost of taking any
action may be disproportionate to the potential benefit gained. In these cases the response
may be to tolerate the risks.
Some risks will only be treatable or containable to acceptable levels, by terminating the
activity. In the public sector, the option to terminate activities may be severely limited
when compared to the private sector. A number of activities are conducted in the government sector because the associated risks are so great that there is no other way in which
the output or outcome, which is required for the public benefit, can be achieved.
26
assessment is an ongoing, iterative process to identify changed conditions (risk assessment cycle) and take actions as necessary. Risk profiles and related controls have to be regularly revisited and reconsidered in order to have assurance that the risk profile continues to be
valid, that responses to risk remain appropriately targeted and proportionate, and mitigating controls remain effective as risks change over
time.
Examples
We refer the reader to the annexes for integrated examples on each of
the objectives and the components of internal control.
27
28
Control activities are the policies and procedures established and executed to address risks and to achieve the entitys objectives.
To be effective, control activities need to:
be appropriate (that is, the right control in the right place and commensurate to the risk involved);
function consistently according to plan throughout the period (that is,
be complied with carefully by all employees involved and not
bypassed when key personnel are away or the workload is heavy);
be cost effective (that is, the cost of implementing the control should
not exceed the benefits derived);
be comprehensive, reasonable and directly relate to the control objectives.
Control activities include a range of policies and procedures as diverse
as:
1. Authorization and approval procedures
Authorizing and executing transactions and events are only done by persons acting within the scope of their authority. Authorization is the principal means of ensuring that only valid transactions and events are initiated as intended by management. Authorization procedures, which
should be documented and clearly communicated to managers and
employees, should include the specific conditions and terms under
which authorizations are to be made. Conforming to the terms of an
authorization means that employees act in accordance with directives
and within the limitations established by management or legislation.
2. Segregation of duties (authorizing, processing, recording, reviewing)
To reduce the risk of error, waste, or wrongful acts and the risk of not
detecting such problems, no single individual or team should control all
key stages of a transaction or event. Rather, duties and responsibilities
should be assigned systematically to a number of individuals to ensure
that effective checks and balances exist. Key duties include authorizing
and recording transactions, processing, and reviewing or auditing transactions. Collusion, however, can reduce or destroy the effectiveness of
this internal control activity. A small organisation may have too few
employees to fully implement this control. In such cases, management
must be aware of the risks and compensate with other controls. Rotation
of employees may help ensure that one person does not deal with all the
key aspects of transactions or events for an undue length of time. Also,
29
encouraging or requiring annual holidays may help reduce risk by bringing about a temporary rotation of duties.
3. Controls over access to resources and records
Access to resources and records is limited to authorized individuals who
are accountable for the custody and/or use of the resources. Accountability for custody is evidenced by the existence of receipts, inventories,
or other records assigning custody and recording the transfer of custody.
Restricting access to resources reduces the risk of unauthorized use or
loss to the government and helps achieve management directives. The
degree of restriction depends on the vulnerability of the resource and the
perceived risk of loss or improper use, and should be periodically
assessed. When determining an asset's vulnerability, its cost, portability
and exchangeability should be considered.
4. Verifications
Transactions and significant events are verified before and after processing, e.g. when goods are delivered, the number of goods supplied is verified with the number of goods ordered. Afterwards, the number of
goods invoiced is verified with the number of goods received. The
inventory is verified as well by performing stock-takes.
5. Reconciliations
Records are reconciled with the appropriate documents on a regular
basis, e.g. the accounting records relating to bank accounts are reconciled with the corresponding bank statements.
6. Reviews of operating performance
Operating performance is reviewed against a set of standards on a regular basis, assessing effectiveness and efficiency. If performance reviews
determine that actual accomplishments do not meet established objectives or standards, the processes and activities established to achieve the
objectives should be reviewed to determine if improvements are needed.
7. Reviews of operations, processes and activities
Operations, processes and activities should be periodically reviewed to
ensure that they are in compliance with current regulations, policies,
procedures, or other requirements. This type of review of the actual
operations of an organisation should be clearly distinguished from the
30
31
32
from, among other things, uniform processing of transactions; information systems automatically initiating transactions; increased potential for
undetected errors; existence, completeness, and volume of audit trails;
the nature of the hardware and software used; and recording
unusual or non-routine transactions. For example, an inherent risk from
the uniform processing of transactions is that any error arising from
computer programming problems will occur consistently in similar
transactions. Effective information technology controls can provide
management with reasonable assurance that information processed by its
systems meets desired control objectives, such as ensuring the completeness, timeliness, and validity of data and preserving its integrity.
Information technology controls consist of two broad groupings, general
controls and application controls.
General controls
General controls are the structure, policies and procedures that apply to
all or a large segment of an entitys information systems - such as mainframe, minicomputer, network, and end-user environments - and help
ensure their proper operation. They create the environment in which
application systems and controls operate.
The major categories of general controls are:
(1) Entity wide security program planning and management provide a
framework and continuing cycle of activity for managing risk,
developing security policies, assigning responsibilities, and monitoring the adequacy of the entitys computer-related controls.
(2) Access controls limit or detect access to computer resources (data,
programs, equipment, and facilities), thereby protecting these
resources against unauthorized modification, loss, and disclosure.
Access controls include both physical and logical controls.
(3) Controls on the development, maintenance and change of application software prevent unauthorized programs or modifications to
existing programs.
(4) System software controls limit and monitor access to the powerful
programs and sensitive files that control the computer hardware and
secure applications supported by the system.
(5) Segregation of duties implies that policies, procedures and an organisational structure are established to prevent one individual from
controlling all key aspects of computer-related operations and
33
34
35
36
37
Communication
Effective communication should flow down, across, and up the organisation, throughout all components and the entire structure.
All personnel should receive a clear message from top management
that control responsibilities should be taken seriously. They should
understand their own role in the internal control system, as well as how
their individual activities relate to the work of others.
There also needs to be effective communication with external parties.
Information is a basis for communication, which must meet the expectations of groups and individuals, enabling them to carry out their responsibilities effectively. Effective communication should occur in all directions, flowing down, across and up the organisation, throughout all
components and the entire structure.
38
One of the most critical communications channels is that between management and its staff. Management must be kept up to date on performance, developments, risks and the functioning of internal control, and
other relevant events and issues. By the same token, management should
communicate to its staff what information it needs and provide feedback
and direction. Management should also provide specific and directed
communication addressing behavioural expectations. This includes a
clear statement of the entitys internal control philosophy and approach,
and delegation of authority.
Communication should raise awareness about the importance and relevance of effective internal control, communicate the entitys risk
appetite and risk tolerances, and make personnel aware of their roles and
responsibilities in effecting and supporting the components of internal
control.
In addition to internal communications, management should ensure there
are adequate means of communicating with, and obtaining information
from external parties, as external communications can provide input that
may have a highly significant impact on the extent to which the organisation achieves its goals.
Based on the input from internal and external communications, management has to take necessary action and perform timely follow up actions.
Examples
We refer the reader to the annexes for integrated examples on each of
the objectives and the components of internal control.
39
2.5 Monitoring
40
Monitoring internal control is aimed at ensuring that controls are operating as intended and that they are modified appropriately for changes in
conditions. Monitoring should also assess whether, in pursuit of the
entitys mission, the general objectives set out in the definition of internal control are being achieved. This is accomplished through ongoing
monitoring activities, separate evaluations or a combination of both, in
order to help ensure that internal control continues to be applied at all
levels and across the entity, and that internal control achieves the desired
results. Monitoring the internal control activities themselves should be
clearly distinguished from reviewing an organisations operations which
is an internal control activity as previously described in section 2.3.
Ongoing monitoring of internal control occurs in the course of normal,
recurring operations of an organisation. It is performed continually and
on a real-time basis, reacts dynamically to changing conditions and is
ingrained in the entitys operations. As a result, it is more effective than
separate evaluations and corrective actions are potentially less costly.
Since separate evaluations take place after the fact, problems will often
be identified more quickly by ongoing monitoring routines.
The scope and frequency of separate evaluations should depend primarily on the assessment of risks and the effectiveness of ongoing monitoring procedures. When making that determination, the organisation
should consider the nature and degree of changes, from both internal and
external events, and their associated risks; the competence and experience of the personnel implementing risk responses and related controls;
and the results of the ongoing monitoring. Separate evaluations of control can also be useful by focusing directly on the controls effectiveness
at a specific time. Separate evaluations may take the form of self-assessments as well as a review of control design and direct testing of internal
control. Separate evaluations also may be performed by the SAIs, by
external or internal auditors.
Usually, some combination of ongoing monitoring and separate evaluations will help ensure that internal control maintains its effectiveness
over time.
All deficiencies found during ongoing monitoring or through separate
evaluations should be communicated to those positioned to take necessary
action. The term deficiency refers to a condition that affects an entitys
ability to achieve its general objectives. A deficiency, therefore, may represent a perceived, potential or real shortcoming, or an opportunity to
41
strengthen internal control to increase the likelihood that the entitys general objectives will be achieved.
Providing needed information on internal control deficiencies to the
right party is critical. Protocols should be established to identify what
information is needed at a particular level for effective decision making.
Such protocols reflect the general rule that a manager should receive
information that affects actions or behaviour of personnel under his or
her responsibility, as well as information needed to achieve specific
objectives.
Information generated in the course of operations is usually reported
through normal channels, which means to the individual responsible for
the function and also to at least one level of management above that
individual. However, alternative communications channels should also
exist for reporting sensitive information such as illegal or improper acts.
Monitoring internal control should include policies and procedures
aimed at ensuring the findings of audits and other reviews are adequately
and promptly resolved. Managers are to (1) promptly evaluate findings
from audits and other reviews, including those showing deficiencies and
recommendations reported by auditors and others who evaluate agencies operations, (2) determine proper actions in response to findings and
recommendations from audits and reviews, and (3) complete, within
established time frames, all actions that correct or otherwise resolve the
matters brought to their attention.
The resolution process begins when audit or other review results are
reported to management, and is only completed after action has been
taken that (1) corrects the identified deficiencies, (2) produces improvements, or (3) demonstrates that the findings and recommendations do
not warrant management action.
Examples
We refer the reader to the annexes for integrated examples on each of
the objectives and the components of internal control.
42
Internal auditors
examine and contribute to the ongoing effectiveness of the internal control system through
their evaluations and recommendations and
therefore play a significant role in effective
internal control.
However they do not have managements primary responsibility for designing, implementing,
maintaining and documenting internal control.
Staff members
43
Supreme Audit
Institutions (SAIs)
encourage and support the establishment of effective internal control in the government. The
assessment of internal control is essential to the
SAIs compliance, financial and performance
audits. They communicate their findings and recommendations to interested stakeholders.
External auditors
Legislators and
regulators
Other parties
interact with the organisation (beneficiaries, suppliers, etc.) and provide information regarding
achievement of its objectives.
44
control. Internal auditors regularly provide information about the functioning of internal control, focusing considerable attention on evaluating
the design and operation of internal control. They communicate information about strengths and weaknesses and recommendations for improving
internal control. However their independence and objectivity should be
guaranteed.
Therefore internal auditing should be an independent, objective assurance and consulting activity that adds value and improves an organisations operations. It helps an organisation accomplish its objectives by
bringing a systematic, disciplined approach to evaluate and improve the
effectiveness of risk management, control and governance processes.
Although internal auditors can be a valuable educational and advisory
resource on internal control, the internal auditor should not be a substitute for a strong internal control system.
For an internal audit function to be effective, it is essential that the internal audit staff be independent from management, work in an unbiased,
correct and honest way and that they report directly to the highest level
of authority within the organisation. This allows the internal auditors to
present unbiased opinions on their assessments of internal control and
objectively present proposals aimed at correcting the revealed shortcomings. For professional guidance, internal auditors should use the Professional Practices Framework (PPF) of The Institute of Internal Auditors
(IIA) including the Definition, the Code of Ethics, the Standards and the
Practice Advisories. Additionally, internal auditors should follow the
INTOSAI Code of Ethics.
In addition to its role of monitoring an entitys internal control, an adequate internal audit staff can contribute to the efficiency of the external
audit efforts by providing direct assistance to the external auditor. The
nature, scope, or timing of the external auditors procedures may be modified if the external auditor can rely upon the internal auditors work.
Staff members
Staff members and other personnel also effect internal control. It is often
these frontline individuals who apply controls, review controls, correct
for misapplied controls, and identify problems that may best be
addressed through controls in conducting their daily assignments.
45
External parties
The second major group of internal control stakeholders are external
parties such as external auditors (including SAIs), legislators and regulators, and other parties. They may contribute to achieving the organisations objectives, or may provide information useful to effect internal
control. However, they are not responsible for the design, implementation, proper functioning, maintenance or documentation of the organisations internal control system.
SAIs and external auditors
The tasks of external parties, in particular external auditors and SAIs,
include assessing the functioning of the internal control system and
informing management about its findings. However, the external partys
consideration of the internal control system is determined by his/her
mandate.
Auditors assessment of internal control implies:
determining the significance and the sensitivity of the risk for which
controls are being assessed;
assessing the susceptibility to misuse of resources, failure to attain
objectives regarding ethics, economy, efficiency and effectivity, or
failure to fulfil accountability obligations, and non-compliance with
laws and regulations;
identifying and understanding the relevant controls;
determining what is already known about control effectiveness;
assessing the adequacy of the control design;
determining, through testing, if controls are effective;
reporting on the internal control assessments and discussing the necessary corrective actions.
The Supreme Audit Institution also has a vested interest in ensuring that
strong internal audit units exist where needed. Those audit units constitute an important element of internal control by providing a continuous
means for improving an organisation's operations. In some countries,
however, the internal audit units may lack independence, be weak, or be
non-existent. In those cases, the SAI should, whenever possible, offer
assistance and guidance to establish and develop those capacities and to
ensure the independence of the internal auditor's activities. This assistance might include secondment or lending of staff, conducting lectures,
46
sharing training materials, and developing methodologies and work programs? This should be done without threatening the independence of the
SAI or external auditor.
The SAI also needs to develop a good working relationship with the
internal audit units so that experience and knowledge can be shared and
work mutually can be supplemented and complemented. Including internal audit observations and recognizing their contributions in the external
audit report when appropriate can also foster this relationship. The SAI
should develop procedures for assessing the internal audit unit's work to
determine to what extent it can be relied upon. A strong internal audit
unit could reduce the audit work of the SAI and avoid needless duplication of work. The SAI should ensure that it has access to internal audit
reports, related working papers, and audit resolution information.
SAIs should also play a leadership role for the rest of the public sector
by establishing their own organisations internal control framework in a
manner consistent with the principles set out in this guideline.
Not only SAIs but also external auditors play an important role in contributing to the achievement of the internal control objectives, in particular fulfilling accountability obligations and safeguarding
resources. This is because external audits of financial reports and information are integral to accountability and good governance. External
audits are still a primary mechanism that external stakeholders use to
review performance, along with non-financial information.
Legislators and regulators
Legislation can provide a common understanding of the internal control
definition and objectives to be achieved. It can also prescribe the policies that internal and external stakeholders are to follow in carrying out
their respective roles and responsibilities for internal control.
47
Annex 1 Examples
49
50
Risk Assessment
Control Activities
Information &
Communication
For each of the service
Possible risks are
Control activities that
The information and
departments an
collisions of ships,
can be organised are the communication related
operational manager is
draining off toxic waste pilotage of ships by
to this situation can be
appointed who has to
or fuel, and bursting of
competent pilots, placing the reporting of
report to the general
dikes. If mishaps are
buoys, beacons and
collisions to warn other
manager of the
related to negligence of markers; visual
ships; informing ships of
department. The
the government
inspection by air, and
weather conditions, and
operational managers
department, it could face taking water samples.
publishing the names of
have the appropriate
a huge liability.
polluters and the
skills and have the
sanctions they are
authority to make certain
facing, and the remedial
decisions. All of them
actions undertaken.
also sign a code of
proper conduct.
Control Environment
A follow-up of the
number of collisions,
environmental violations,
results of the samples
and a comparison with
other countries and with
historical data, can help
to monitor the
effectiveness and
efficiency of the pilotage
of ships, the placing of
the beacons and markers,
the inspections, and the
water samples.
Monitoring
Fulfilling accountability obligations example (1): A department that is responsible for the management of safe transport by water
and sea has been organised by different service departments responsible for piloting, buoyage, inspection of the quality of the water,
promotion of the use of waterways, investments in and maintenance of infrastructure (bridges, dikes, canals and locks).
51
(The abovementioned
situation is not an
example of good
practice!)
Because of the
managers good
reputation, the executive
committee trusted the
manager and did not
carry out the usual status
meetings to check on the
managers progress.
Control Environment
Control Activities
Information &
Communication
By not specifying the
This risk can be
This report should be
objectives, the risk arises decreased by installing
delivered in time and
of not achieving them.
appropriate lines of
according to the
Also the danger exists
reporting and a reporting specified reporting
that reporting will not be model which defines the model. It should specify
timely as the manager
information that should the growth objectives,
wants to wait with this
be given.
how they are measured
report until he can say
and why they are
he realised the objective
measured this way. All
of 15% growth.
the back up information
Moreover, how to
should be available.
measure the 15% growth
was not revealed, so he
can say the number of
people doing sports has
increased or the number
of hours people do
sports, or even the
number of sports centres
or sports clubs has
increased by 15%. This
way the quality of the
reported information
decreases substantially.
Risk Assessment
The verification of
whether or not the report
is satisfactory and what
information is given and
what information is still
missing can be a form of
monitoring.
Monitoring
Fulfilling accountability obligations example (2): The manager of the department of sports stipulated last year the objective that the
practice of sports would increase by 15% in the coming years.
52
Risk Assessment
Control Environment
Control Activities
Information &
Communication
The procedures relating
to the publication of all
stipulations for this
government tender, the
assessment of the
received tenders and the
announcement of the
selected tenderer, should
be documented in
writing and detail all
actions to be taken.
When assessing the
tenders, all reasons why
a tender was or was not
chosen should be
documented.
Monitoring
Compliance with applicable laws and regulations example: The ministry of defence wants to buy new fighter planes via a public
contract and publishes all stipulations and procedures for this government tender. All tenders received are left unopened until the end
of the tender period. At that moment all tenders are opened in the presence of the responsible managers and some officials. Only these
tenders will be investigated and compared to decide which tender is the best.
53
The department of
culture needs to make
sure that its organisation
structure is suited to
support overseeing
design and construction
of the proposed
additions, as well as
planning and operations
of the new museums.
Control Environment
Control Activities
Information &
Communication
The fact that the number The control activities
The information and
of museum visits does
related to the before
communication related
not increase is one of the mentioned risks can be a to this example can
possible risks. Also the
budgetary control that
consist of the
risk that some of the
compares actual to
documentation of
proposals will backfire
budget, observations of
meetings with architects,
and exceed their budget the progress of the
fire department (for
is possible. For instance, construction, and
safety regulations),
if decreasing ticket
demanding justifications artists and others. It can
prices does not increase for overspending the
also contain different
museum visits, this
budget.
reports concerning
decreases the
following up on the
government receipts.
budget and the progress
Further, building new
of the construction work.
museums without proper
planning and
consideration of
requirements of lighting,
temperature and security
can result in expensive
adjustments during or
after construction.
Risk Assessment
Monitoring
Orderly, ethical, economical, efficient and effective operations example (1): The department of culture wants to increase museum
visits by the public. In order to accomplish this, it proposes to build new museums, give every citizen a cultural cheque and decrease
ticket prices. To be economical, effective and efficient, management has to consider and evaluate whether or not the objectives as formulated can be achieved by its proposals and how much each of these proposals will cost.
54
Control Environment
Control Activities
Information &
Communication
The risks involved are
Control activities can be: - Progress reports
that unscrupulous
- Checking the
detailing the costs and
associations qualify for a qualifications of the
the number of wells
grant but do not use the
associations applying
that were drilled and
money for what it was
for a grant.
the number of acres
intended.
- Checking on site the
that were irrigated.
progress of and
reviewing progress
- (Copies of) invoices
reports on the
are requested as
construction works.
justifications for the
- Checking the
subsidised expenses.
expenditures of the
associations by
reviewing their
invoices, and delaying
payment of (or part of)
the subsidy until this
review is completed.
Risk Assessment
Monitoring
Orderly, ethical, economical, efficient and effective operations example (2): The government wants to develop agriculture and
increase the quality of life in the countryside. They provide funds to subsidize the construction of irrigation and the drilling of wells.
55
Risk Assessment
Control Environment
Control Activities
Information &
Communication
Reports of damaged
fences and differences
noticed during stock
takes. Supply approvals
and procedures also
provide information and
communication related
to this objective.
Monitoring can be an
inspection of the fence,
unannounced stock takes,
follow-up of stock
movements or even a
secret test of security.
Monitoring
Safeguarding resources example (1): The ministry of defence has some warehouses, military stores and fuel depots. The army command has the policy that these supplies are only for professional military use and not for personal use.
56
Management must
dedicate its commitment
to competence and
proper behaviour
involving IT, and
provide proper training
in this area. Human
capital policies also play
a key role in establishing
a positive control
environment for IT
issues.
At the application
controls level, the agency
has not maintained access
authorizations.
Risk Assessment
Control Environment
Information &
Communication
The agency can:
Procedures on IT control
- implement logical (e.g. should be available and
passwords) and physical software changes should
be documented before
access controls (e.g.
locks, ID badges,
the software is placed in
alarms);
operation.
- deny the ability to log in
to the operating system Policies and job
for application users;
descriptions supporting
- limit access to the
the principles of
production environment segregation of duties
for the application
should be developed.
development staff;
- use audit logs to register Audit logs on access
all access (attempts) and (attempts) and
commands to detect
(unauthorized)
security violations;
commands should be
- have a contingency and periodically reported and
disaster recovery plan to reviewed.
ensure the availability of
critical resources and
facilitate the continuity
of operations;
- have firewalls and
monitor the web server
activity to secure the
network traffic.
Control Activities
Performing an IT audit,
doing a disaster
simulation exercise, and
monitoring the web
server activity, can be
part of monitoring the IT
environment.
Monitoring
Safeguarding resources example (2): Large amounts of sensitive information are stored on computer media in an agency of the ministry of justice. However, the importance of IT controls is neglected and consequently the IT control has numerous deficiencies.
Annex 2 Glossary
57
A
Access control
In information technology, controls designed to protect resources from unauthorized modification, loss, or disclosure.
Accountability
The process whereby public service bodies and the individuals within them
are held responsible for their decisions and actions, including their stewardship
of public funds and all aspects of performance.
Duty imposed on an audited person or entity to show that he/it has administered or controlled the funds entrusted to him/it in accordance with the terms on
which the funds were provided. (glossarium)
Application
Computer program designed to help people perform a certain type of work,
including specific functions, such as payroll, inventory control, accounting,
and mission support. Depending on the work for which it is designed, an
application can manipulate text, numbers, graphics, or a combination of these
elements.
58
Application controls
The structure, policies, and procedures that apply to separate, individual application systems and are designed to cover the processing of data within specific
applications software.
Programmed procedures in application software, and related manual procedures, designed to help ensure the completeness and accuracy of information
processing. Examples include computerized edit checks of input data, numerical
sequence checks and manual procedures to follow up on items listed in exception reports. (COSO 1992)
Audit
Review of a bodys activities and operations to ensure that these are being performed or are functioning in accordance with objectives, budget, rules and standards. The aim of this review is to identify, at regular intervals, deviations
which might require corrective action. (glossarium)
Audit committee
A committee of the Board of Directors whose role typically focuses on
aspects of financial reporting and on the entity's processes to manage business and financial risk, and for compliance with significant applicable legal,
ethical, and regulatory requirements. The Audit Committee typically assists
the Board with the oversight of (a) the integrity of the entity's financial statements, (b) the entity's compliance with legal and regulatory requirements,
(c) the independent auditors' qualifications and independence, (d) the performance of the entity's internal audit function and that of the independent
auditors and (e) compensation of company executives (in absence of a remuneration committee).
Audit institution
Public body which, however it is appointed, composed or organised, carries out
external audit duties in accordance with the law. (glossarium)
B
Budget
Quantitative, financial expression of a program of measures planned for a given
period. The budget is drawn up with a view to planning future operations and to
making ex post facto checks on the results obtained. (glossarium)
Budgetary control
Control by which an authority which has granted an entity a budget ensures that
this budget has been implemented in accordance with the estimates, authorisations and regulations. (glossarium)
59
C
Collusion
A cooperative effort among employees to defraud a business of cash, inventory,
or other assets. (Arens, Elder & Beasley)
Compliance
Having to do with conforming with laws and regulations applicable to an
entity. (COSO 1992)
Conformity and adherence to policies, plans, procedures, laws, regulations,
contracts, or other requirements. (IIA)
Component of internal control
One of five elements of internal control. The internal control components are the
entitys internal control environment, risk assessment, control activities, information and communication, and monitoring. (COSO 1992)
Computer controls
1. Controls performed by computer, i.e., controls programmed into computer
software (contrast with manual controls). 2. Controls over computer processing
of information, consisting of general controls and application controls (both programmed and manual). (COSO 1992)
Computer information system
A computer information system (CIS) environment exists when a computer of
any type or size is involved in the processing by the entity of (financial) information of significance to the audit, whether that computer is operated by the
entity or by a third party. (IFAC)
Control
1. A noun, used as a subject, e.g. existence of a control a policy or procedure that is part of internal control. A control can exist within any of the five
components. 2. A noun, used as an object, e.g. to effect control the result of
policies and procedures designed to control; this result may or may not be effective internal control. 3. A verb, e.g. to control to regulate; to establish or
implement a policy that affects control. (COSO 1992)
Any action taken by management, the board, and other parties to manage risk
and increase the likelihood that established objectives and goals will be
achieved. Management plans, organizes, and directs the performance of sufficient actions to provide reasonable assurance that objectives and goals will be
achieved. (IIA)
Control activity
Control activities are the policies and procedures established to address risks and
to achieve the entitys objectives. The procedures that an organisation puts in
place to treat risk are called internal control activities. Internal control activities
60
are a response to risk in that they are designed to contain the uncertainty of outcome that has been identified.
Control environment
The control environment sets the tone of an organisation, influencing the control
consciousness of its staff. It is the foundation for all other components of internal control, providing discipline and structure.
Corruption
Any form of unethical use of public authority for personal or private advantage. (XVI INCOSAI, Uruguay, 1998)
The misuse of entrusted power for private benefit. (Transparency International)
COSO
Committee of Sponsoring Organisations of the Treadway Commission, a group
of several accounting organisations. In 1992, it published a significant study on
internal control titled Internal Control Integrated Framework. The study is
often referred to as the COSO Report.
D
Data
Facts and information that can be communicated and manipulated.
Deficiency
A perceived, potential or real internal control shortcoming, or an opportunity to
strengthen internal control to provide a greater likelihood that the entity's objectives are achieved. (COSO 1992)
Design
1. Intent. As used in the definition, internal control is intended to provide reasonable assurance as to the achievement of objectives; when the intent is realized, the system can be deemed effective. 2. Plan; the way a system is supposed
to work, contrasted with how it actually works. (COSO 1992)
Detective control
A control designed to discover an unintended event or result (contrast with preventive control) (COSO 1992)
Documentation
Documentation of the internal control structure is the material and written evidence of the components of the internal control process, including the identification of an organisation's structure and policies and its operating categories, its
related objectives and control activities. These should appear in documents such
as management directives, administrative policies, procedures manuals, and
accounting manuals.
61
E
Economical
Not wasteful or extravagant. It means getting the right amount of resources, of
the right quality, delivered at the right time and place, at the lowest cost.
Economy
Minimising the cost of resources used for an activity, having regard to the
appropriate quality. (INTOSAI auditing standards)
Acquisition at the right time and at the lowest cost of financial, human and
material resources which are suitable in terms of both quality and quantity.
(glossarium)
Edit checks
Programmed controls built into the early stages of the input process to identify
erroneous data fields. For example, alphanumeric characters entered into numerical fields can be rejected by this control. Programmed edit controls can also be
applied, for example, when transactions data enter the processing cycle from
another application.
Effective
Refers to the accomplishment of objectives or the extent to which the outcomes of an activity match the objective or the intended effects of that
activity.
Effectiveness
The extent to which objectives are achieved and the relationship between the
intended impact and the actual impact of an activity. (INTOSAI auditing standards)
Extent to which the stated objectives have been attained in a cost-effective
way. (glossarium)
Efficient
Refers to the relationship between the resources used and the outputs produced
to achieve the objectives. It means that minimum resource inputs are used to
achieve a given quantity and quality of output, or a maximum output with a
given quantity and quality of resource inputs.
Efficiency
The relationship between the output, in terms of goods, services or other
results, and the resources used to produce them. (INTOSAI auditing standards)
Use of financial, human and material resources in such a way as to maximize
output for a given amount of resources, or to minimize input for a given quantity or quality of output. (glossarium)
62
63
G
General controls
General controls are the structure, policies and procedures that apply to all or
a large segment of an entitys information systems and help ensure their proper
operation. They create the environment in which application systems and controls operate.
Policies and procedures that help ensure the continued, proper operation of
computer information systems. They include controls over information technology management, information technology infrastructure, security management,
and software acquisition, development and maintenance. General controls support the functioning of programmed application controls. Other terms sometimes used to describe general controls are general computer controls and information technology controls. (COSO ERM)
I
Independence
Freedom given to an audit body and its auditors to act in accordance with the
audit powers conferred on them without any outside interference. (glossarium)
The freedom of the SAI in auditing matters to act in accordance with its audit
mandate without external direction or interference of any kind. (INTOSAI auditing standards)
The freedom from conditions that threaten objectivity or the appearance of
objectivity. Such threats to objectivity must be managed at the individual auditor, engagement, functional and organizational levels.(IIA)
The auditors ability to maintain an unbiased viewpoint in the performance of
professional services (independence in fact) (Arens, Elder & Beasley)
The auditors ability to maintain an unbiased viewpoint in the eyes of others
(independence in appearance). (Arens, Elder & Beasley)
Inherent limitations
Those limitations of all internal control systems. The limitations relate to the
limits of human judgment; resource constraints and the need to consider the
cost of controls in relation to expected benefits; the reality that breakdowns
can occur; and the possibility of management override and collusion. (COSO
1992)
Inherent risk
The risk to an entity in the absence of any actions management might take to
alter either the risks likelihood or impact. (COSO ERM)
Institute of Internal Auditors (IIA)
The IIA is an organisation that establishes ethical and practice standards, provides education, and encourages professionalism for its members.
64
Integrity
The quality or state of being of sound moral principle; uprightness, honesty and
sincerity; the desire to do the right thing, to profess and live up to a set of values and expectations. (COSO 1992)
Internal audit
The functional means by which the managers of an entity receive an assurance
from internal sources that the processes for which they are accountable are operating in a manner which will minimise the probability of the occurrence of
fraud, error or inefficient and uneconomic practices. It has many of the characteristics of external audit but may properly carry out the directions of the level
of management to which it reports. (INTOSAI auditing standards)
an independent, objective assurance and consulting activity designed to add
value and improve an organisations operations. It helps an organisation accomplish its objectives by bringing a systematic, disciplined approach to evaluate
and improve the effectiveness of risk management, control and governance
processes (IIA)
Internal auditing is an appraisal activity established within an entity as a service to the entity. Its functions include, amongst other things, examining, evaluating and monitoring the adequacy and effectiveness of the accounting and
internal control systems. (IFAC)
Internal auditor(s)
Examine and contribute to the ongoing effectiveness of the internal control
system through their evaluations and recommendations, but they dont have
primary responsibility for designing, implementing maintaining and documenting it.
Internal audit unit
Department (or activity) within an entity, entrusted by its management with
carrying out checks and assessing the entitys systems and procedures in order
to minimize the likelihood of fraud, errors and inefficient practices. Internal
audit must be independent within the organization and report directly to management. (glossarium)
A department, division, team of consultants, or other practioner(s) that provides independent, objective assurance and consulting services designed to add
value and improve an organisations operations. The internal audit activity helps
an organisation accomplish its objectives by bringing a systematic, disciplined
approach to evaluate and improve the effectiveness of risk management, control
and governance processes. (IIA)
Internal control
Internal control is an integral process that is effected by an entitys management
and personnel and is designed to address risks and provide reasonable assurance
that in pursuit of the entitys mission, the following general objectives are being
achieved: executing orderly, ethical, economical, efficient and effective operations,
65
fulfilling accountability obligations, complying with applicable laws and regulations and safeguarding resources against loss, misuse and damage.
Internal Control System (or Process, or Architecture)
A synonym for Internal Control, applied in an entity. (COSO 1992)
International Organisation of Supreme Audit Institutions (INTOSAI)
INTOSAI is the professional organisation of supreme audit institutions (SAI) in
countries that belong to the United Nations or its specialised agencies. SAIs play
a major role in auditing government accounts and operations and in promoting
sound financial management and accountability in their governments. INTOSAI
was founded in 1953 and has grown from the original 34 countries to a membership of over 170 SAIs.
Input
Any data entered into a computer or the process of entering data into the computer.
L
Legislature
The law-making authority of a country, for example a Parliament. (INTOSAI
auditing standards)
Logical access
The act of gaining access to computer data. Access may be limited to read
only, but more extensive access rights include the ability to amend data, create
new records, and delete existing records. (see also physical access)
M
Mainframe
A high-level computer designed for the most intensive computational tasks.
Mainframe computers are often shared by multiple users connected to the computer by terminals.
Management
Comprises officers and others who also perform senior managerial functions.
Management includes directors and the audit committee only in those instances
when they perform such functions. (IFAC)
Management intervention
Management's actions to overrule prescribed policies or procedures for legitimate purposes; management intervention is usually necessary to deal with
66
67
P
Physical access
In access control, gaining access to physical areas and entities. (see logical
access)
Policy
Management's dictate of what should be done to effect control. A policy serves
as the basis for procedures for its implementation. (COSO 1992)
Preventive control
A control designed to avoid unintended events or results (contrast with detective
control). (COSO 1992)
Procedure
An action that implements a policy. (COSO 1992)
Processing
In information technology, the execution of program instructions by the computers central processing unit.
Public accountability
The obligations of persons or entities, including public enterprises and corporations, entrusted with public resources to be answerable for the fiscal, managerial
and program responsibilities that have been conferred on them, and to report to
those that have conferred these responsibilities on them. (INTOSAI auditing
standards)
Public sector
The term public sector refers to national governments, regional (for example,
state, provincial, territorial) governments, local (for example, city, town) governments and related governmental entities (for example, agencies, boards, commissions and enterprises). (IFAC)
68
R
Reasonable assurance
Equates to a satisfactory level of confidence under given considerations of
costs, benefits, and risks.
The concept that internal control, no matter how well designed and operated,
cannot guarantee that an entity's objectives will be met. This is because of
inherent limitations in all internal control systems. (COSO 1992)
Residual risk
The risk that remains after management responds to the risk.
Risk
The possibility that an event will occur and adversely affect the achievement of
objectives. (COSO ERM)
Risk appetite
The amount of risk to which the entity is prepared to be exposed before it
judges action to be necessary.
The broad-based amount of risk a company or other entity is willing to accept
in pursuit of its mission or vision. (COSO ERM)
Risk assessment
Risk assessment is the process of identifying and analysing relevant risks to the
achievement of the entitys objectives and determining the appropriate response.
Risk assessment cycle
An ongoing, iterative process to identify and analyse altered conditions, opportunities and risks and to take actions as necessary, in particular modifying internal
control to address changing risk. Risk profiles and related controls have to be regularly revisited and reconsidered in order to have assurance that the risk profile
continues to be valid, that responses to risk remain appropriately targeted and proportionate, and mitigating controls remain effective as risks change over time.
Risk evaluation
Means estimating the significance of a risk and assessing the likelihood of the
risk occurrence.
Risk profile
An overview or matrix of the key risks facing an entity or sub-unit that includes
the level of impact (e.g., high, medium, low) along with the probability or likelihood of the event occurring.
Risk tolerance
The acceptable variation relative to the achievement of objectives. (COSO
ERM)
69
S
Security program
An organization-wide program for security planning and management that
forms the foundation of an organizations security control structure and reflects
senior managements commitment to addressing security risks. The program
should establish a framework and continuing cycle of activity for assessing risk,
developing and implementing effective security procedures, and monitoring the
effectiveness of these procedures.
Segregation (or separation) of duties
To reduce the risk of error, waste, or wrongful acts and the risk of not detecting such problems, no singular individual or team should control all key
stages (authorizing, processing, recording, reviewing) of a transaction or
event.
Service continuity control
This type of control involves ensuring that when unexpected events occur, critical operations continue without interruption or are promptly resumed and critical and sensitive data are protected.
Stakeholders
Parties that are affected by the entity, such as shareholders, the communities
in which the entity operates, employees, customers and suppliers. (COSO
ERM)
Supreme Audit Institution (SAI)
The public body of a State which, however designated, constituted or organised,
exercises by virtue of law the highest public auditing function of that State.
(INTOSAI auditing standards & IFAC)
System software
Software primarily concerned with coordinating and controlling hardware and
communication resources, access to files and records, and the control and scheduling of applications.
System software controls
Controls over the set of computer programs and related routines designed to
operate and control the processing activities of computer equipment.
U
Uncertainty
Inability to know in advance the exact likelihood or impact of future events.
(COSO ERM)
70
V
Value for money
See Economy, Effectiveness and Efficiency
71