Professional Documents
Culture Documents
Imperial Tubingtoolsnt
Imperial Tubingtoolsnt
Imperial
fax 1-800-605-2442
fax 1-800-605-2442
NEW PRODUCTS
NEW
PAGE
TUBE CUTTERS
17
TUBE BENDERS
370-FH
371-FH
21
21
95-S
6 IN 1 SWAGE PUNCH
33
NEW
TC-1010
NEW
370-FH
fax 1-800-605-2442
NEW
95-S
16
TUBE CUTTERS
METAL TUBING
HI-DUTY TUBE CUTTERS
For 1/8" to 1-1/8" and 1/4" to 1-5/8" O.D. tubing.
TUBE CUTTERS
Enclosed hardened steel, thrust bearing feed mechanism for smoothest cutting action and trouble free operation.
Imperials unique design eliminates spiraling for clean right angle cuts. Our high precision machining and construction method
permits one-piece screw type axle for easy access to cutting wheel no clip to lose or replace.
Rugged aluminum alloy body designed for handling ease. Body is hand buffed and nickel chrome plated to a high luster finish.
Foldaway hardened steel reamer with turned cutting edge removes inside burrs cleanly. Filing surface removes outside burrs.
Rollers feature flare cut-off groove to reduce tube loss when damaged flare is removed.
Imperial cutter wheels are made of the highest quality wear & abrasion resistant chromium steel and precision machined to
exacting specifications for accurate cutting and long life. Each tool is supplied with a spare cutter wheel.
All Imperial tube cutters are 100% factory tested to ensure accurate spiral free cutting.
TC-1000
S75015
S75046
NEW
TC-1010
312-FC
TC-1020 TUBE
CONSTRICTOR
RETRACTABLE REAMER
Foldaway hardened steel reamer with turned
cutting edge removes inside burrs cleanly.
Filing surface removes outside burrs.
227-FA
17
fax 1-800-605-2442
TUBE CUTTERS
METAL TUBING
IMP MINI TUBE CUTTERS
For 1/8" to 5/8" and 3/16" to 7/8" O.D. tubing.
Big capacity, small size tube cutters designed for use in tight quarters where other cutters won't fit.
Enclosed feed screw minimizes contamination assuring continued smooth operation.
Corrosion resistant stainless steel rollers positioned at bottom of cutter allows for easier cutter
engagement on tubing and smoother cutting action.
All Imperial tube cutters are 100% factory tested to ensure accurate spiral free cutting.
Swing Radius
1-1/4"
TC-1050
TC-1050 For 1/8" to 5/8" and 4 mm to 15 mm O.D. tubing. Includes (1) S32633
general-purpose cutter wheel. Swing radius 1-1/4". Length
1-3/4". Wt. 2.5 oz.
TC-2050 For 3/16" to 7/8" and 5 mm to 22 mm O.D. tubing. Includes (1) S75015
general-purpose cutter wheel. Swing radius 1-11/16". Length
2-1/4". Wt. 4.0 oz.
174-F
TUBE CUTTERS
406-FA
206-FB
RATCHET FEED
Ratchet release opens cutter instantly
to maximum size.
RATCHET FEED
Push on handle to slide cutting wheel to
tubing. Rotate handle for fine adjustment.
SAWING VISE
Press to release.
384-FA
384-FA For 1/8" to 1-1/2" and 4 mm to 28 mm O.D. tubing. Cuts metal and
non-metal tubing. Designed for stainless steel tubing that requires flaring.
Grips tube or hose securely for perfect right angle cuts. Excellent for holding
stainless steel tubing and wire braided hose when cutting with a hacksaw.
Quick clamp adjustment with instant tube release. Replaceable hardened
steel hacksaw guides. Fastens on bench or clamp in vise. Size: 5" x 3-1/8"
x 5-1/8". Wt. 2.5 lbs.
Conforms to Federal Specification GGG-V-436d.
fax 1-800-605-2442
18
TUBE CUTTERS
307-FP
TUBE CUTTERS
327-FP
327-FP
307-FP POP UP DISPLAY
19
fax 1-800-605-2442
TUBE CUTTERS
METAL TUBING
NEW TUBE CUTTER SERVICE CENTER
For 1/8" to 4-1/8" O.D. tubing.
Selling Imperial replacement cutter wheels, reamer blades and fasteners
just got easier. Our new Service Center organizes a popular selection of
replacement parts for Imperial cutters. Display on the counter or bring it
with you when making sales calls. You can even sell the whole unit to
customers!
SAE
QUANTITY
PART # DESCRIPTION
METRIC
10
5
10
5
5
3
3
3
3
3
5
3
3
3
3
1
CUTTER
TUBE CUTTERS
PART
PART# #
CUTTER WHEEL
Part# S74761
for Cutters # 206-FB, 206-FBP
CUTTER WHEEL
Part # S32633
for Cutters # TC-1050, 227-FA
REAMER BLADE
Part # S7931801
for Cutters # TC-1000,TC-1010, 312-FC
fax 1-800-605-2442
20
TUBE BENDERS
For bending soft copper, aluminum, brass, steel and other tubing.
NEW
370-FH
TUBE O.D. (in.) RADIUS TO CENTER OF TUBE (in.)
TUBE BENDERS
1/4
3/8
1/2
11/16
1-1/8
1-1/2
371-FH
TUBE O.D. (mm) RADIUS TO CENTER OF TUBE (mm)
8
10
12
17.5
28.6
38.12
367-FH
368-FH
102-F-08
21
CATALOG NUMBER TUBE O.D. (in.) LENGTH (in.) WEIGHT EACH (OZ.)
102-F-04
102-F-05
102-F-06
102-F-07
102-F-08
102-F-10
102-F-12
102-F-14
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
10
10
10
12
12
12
12
12
fax 1-800-605-2442
3
3
4
6.25
6.5
8
10
10
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
LEVER TYPE
364-FHA LEVER TYPE TUBE BENDERS
364-FHA-14
Features telescopic handles
for increased leverage.
Expandable style furnished
for 7/8" and 1" O.D. tubing.
364-FH-02
364-FH-03
364-FHA-04
364-FHA-05
364-FHA-06
364-FHA-07
364-FHA-08
364-FHA-10*
364-FHA-12*
364-FHA-14*
364-FHA-16*
1/8
3/16
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
RADIUS
3/8
7/16
9/16
11/16
15/16
1-1/2
1-1/2
2-1/4
3
3
3-1/2
0.5
0.5
1.0
1.0
1.75
3.5
3.5
5.5
7.0
10.5
10.5
364-FHA-06
WEIGHT EACH
CATALOG NUMBER
TUBE O.D.
(mm)
(mm)
(inches)
(kg.)
(lbs.)
364-FHAM-6 mm
364-FHAM-8 mm
364-FHAM-10 mm
364-FHAM-12 mm
6
8
10
12
14.2
17.5
24.0
38.1
9/16
11/16
15/16
1-1/2
0.45
0.45
0.79
1.6
1.0
1.0
1.75
3.5
364-FH-02
364-FHA-10
TUBE O.D.(in.)
364-FHB-04
364-FHB-05
364-FHB-06
364-FHB-07
364-FHB-08
1/4
5/16
3/8
7/16
1/2
RADIUS
9/16
11/16
15/16
1-1/2
1-1/2
1.0
1.0
1.75
3.5
3.5
Handle swivels at 90
Bends to 90
WEIGHT EACH
CATALOG NUMBER
TUBE O.D.
(mm)
(mm)
(inches)
(kg.)
(lbs.)
364-FHBM-6 mm
364-FHBM-8 mm
364-FHBM-10 mm
364-FHBM-12 mm
6
8
10
12
14.2
17.5
24.0
38.1
9/16
11/16
15/16
1-1/2
0.45
0.45
0.79
1.6
1.0
1.0
1.75
3.5
364-FHB-06 PATENTED
fax 1-800-605-2442
22
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
LEVER TYPE
564-FH AND 564-FHT LEVER TYPE HEAVY-DUTY TUBE BENDERS
For 3/8" and 1/2" O.D. tubing.
These heavy-duty tube benders feature high-strength tool steel construction on all components subjected to stress
during the bending process including forming rollers, form wheel, stop pins, hook and cam adjustment shaft.
Unique offset handle design assures maximum power transfer between worker and bender. Bender will not
gyrate as handles are brought to closed position.
TUBE BENDERS
CATALOG NUMBER
564-FHT-06
564-FH-06
564-FH-08
564-FH-06
PATENTED
RADIUS
15/16
1-1/8
1-1/2
5.0
5.5
7.0
Bend calibrations
45
90
180
Adjustable bend
angle indicator (not
available on FHT)
23
fax 1-800-605-2442
TUBE BENDERS
For bending soft copper, aluminum, brass, steel, stainless steel and other tubing.
7/8
TUBE BENDERS
S8485201
S66914
S68481
S68502
S8426601
S74754
9/16
11/16
1-5/8
1-5/8
2-1/4
3
S68484
S68485
S8425301
S8114601
3/4
5/8
1/2
5/8
3/8
3/8
1/2
1-5/8
1-5/8
2-1/4
3
S8485201
S8487001
S8485201
S68496
S68492
S8485201
S8485201
S68478
S8058901
S66914
S68481
S68481
S66914
S68502
S8442401
S8058801
S66914
S68481
S68481
S66914
S68502
S68497
S62156
S66914
S68481
S68481
S66914
S68502
S68493
S68480
S66914
S68481
S66914
S68502
S68479
3/4
S8426501
fax 1-800-605-2442
24
TUBE BENDERS
For aircraft grade stainless steel (MIL-T-6845) and all other metal tubing of bending temper.
GEAR TYPE
270-F GEAR TYPE TUBE BENDER
For 3/8" to 1-1/8" O.D. tubing.
For all bending work. Spur-gear type with 10-to-1 ratio for easy bending of all tempered
tubing. Floating shoe aligns tube perfectly on calibrated forming wheel. Pull-pin on
wheel speeds repositioning for bends over 90. Portable. Can be hand held, clamped in
vise or bolted to bench. Adapts to pipe vise with handle 271-F.
271-F
Pipe vise extension (fits all
270-F Benders). For use
when clamping bender in
pipe vise. Wt. 1.75 lbs.
270-F
Each tool bends only one size.
TUBE BENDERS
CATALOG NUMBER
270-F-06
270-F-08
270-F-10
270-F-12
270-F-14
270-F-16
270-F-18
RADIUS FROM
MIN. RETURN
WEIGHT
EACH (lbs.)
1-3/4
2-1/2
3
4
4
4
4
4-1/2
6
7-1/2
9-1/2
9-1/2
9-1/2
9-1/2
3/8
1/2
5/8
3/4
7/8
1
1-1/8
WALL THICKNESS
(in.)
3
4.75
8.5
15
14.75
14.75
14.25
.030 to .060
.035 to .065
.040 to .072
.042 to .083
.045 to .083
.065 to .095
.065 to .095
REPLACEMENT PARTS
For Imperial 270-F Gear Type Tube Benders
SPRING RING 11
HOOK 4
CHAIN 15
BODY 6
DRIVE SCREW 14
HANDLE 7
WHEEL 1
COTTER PIN 10
PINION SHAFT 9
SPRING RING 8
Order by catalog number and O.D. size. Each bender handles only one size.
CATALOG
NUMBER
25
size (in.) 1 part no. 2 part no. 3 part no. 4 part no. 5 part no. 6 part no. 7 part no.
8 part no.
9 part no. 10 part no. 11 part no. 12 part no. 13 part no. 14 part no. 15 part no.
270-F-06
3/8
S62244
S62245
S62246
S62247
S62250
S62251
S62252
S62253
S62254
S62255
S62257
S62258
S62838
S62836
S62839
270-F-08
1/2
S62261
S62264
S62246
S62263
S62262
S62260
S62269
S62253
S62268
S62255
S62266
S62265
S62840
S62836
S62839
270-F-10
5/8
S62275
S62280
S62279
S62278
S62277
S62276
S62284
S62285
S62283
S62255
S62281
S62282
S62841
S62836
S62842
270-F-12
3/4
S62305
S62294
S62298
S62307
S62306
S62288
S62292
S62297
S62291
S62255
S62296
S62295
S62835
S62836
S62837
270-F-14
7/8
S62302
S62294
S62298
S62304
S62303
S62288
S62292
S62297
S62291
S62255
S62296
S62295
S62835
S62836
S62837
270-F-16
S62299
S62294
S62298
S62301
S62300
S62288
S62292
S62297
S62291
S62255
S62296
S62295
S62835
S62836
S62837
270-F-18
1-1/8
S62287
S62294
S62298
S62290
S62289
S62288
S62292
S62297
S62291
S62255
S62296
S62295
S62835
S62869
S62837
fax 1-800-605-2442
TUBE BENDERS
GEAR TYPE
WORM GEAR TUBE BENDER
For 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4" O.D. tubing.
600-F Precision tool for highest quality work. Worm gear type with
50-to-1 ratio and crank with revolving hand grip. Keeps effort
at a minimum. Follow bar eliminates drawing action and
keeps tube in virtually perfect round. Adjustable pressure
roller positions quickly in index holes. Enclosed gears.
Furnished in carrying case. Size of kit:14" x 9" x 6". Wt.35.0 lbs.
600-F
.016 to .049
.020 to .065
.028 to .083
.035 to .083
.042 to .083
.049 to .083
TUBE BENDERS
1/4
5/16
3/8
1/2
5/8
3/4
Conforms to Federal Specification GGG-B-191b, Type I, Class 2. Meets ANSI specification (B31.1) and
ASME Section III Nuclear Code.
1/4
5/16
3/8
1/2
5/8
3/4
.016 to .049
.020 to .065
.028 to .083
.035 to .083
.042 to .083
.049 to .083
9/16
11/16
15/16
1-1/4
1-1/2
1-3/4
Conforms to Federal Specification GGG-B-191a, and Interim Amendment No. 2, Type I, Class 1.
fax 1-800-605-2442
26
45 FLARING TOOLS
45 FLARING TOOLS
For 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" O.D. tubing.
195-FC
195-FC Flares 7 sizes of tubing. Rugged forged steel slip-on yoke and
hardened flaring bar. Positive clamping action of bars
prevents tube slippage. Self centering yoke with swivel-type,
296-FC
hardened steel, chrome-finished flaring cone forms better flares
with less effort. Design of yoke permits flaring where there is
little space between nut and tube end. Satin finish nickel-chrome
plated. Wt. 2.0 lbs.
45 METRIC SIZE FLARING TOOL
296-FC Flares 7 sizes of tubing. Economical, fast operating tool. Quick
395-FAM Same as 195-FC except for metric size tubing
slip-on yoke. Easy operating swivel-type, hardened steel,
4 mm, 6 mm, 8 mm, 10 mm, 12 mm,
chrome-finished cone assures smooth flares. Chrome and black
15 mm, 16 mm O.D. tubing.
finish. Wt. 1.75 lbs.
195-FC, 296-FC
Outside Tube Diameter
Wall Thickness
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
3/8
.035
7/16
.035
1/2
.035
5/8
.035
395-FAM
Outside Tube Diameter
Wall Thickness
(mm)
(mm)
4
1.0
6
1.0
8
1.0
10
1.0
12
1.0
15
1.0
16
1.0
103-FS For sizes 3/4", 7/8" and 1" O.D. tubing. Wt. 3.75 lbs.
203-FA For sizes 5/8", 3/4", 7/8" and 1-1/8" O.D. tubing. Wt. 3.75 lbs.
375-FS For sizes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4"
O.D. tubing. Wt. 3.75 lbs.
376-FS For sizes 1/2", 5/8", 3/4" O.D. tubing. Wt. 2.0 lbs.
Outside Tube Diameter
Wall Thickness
(in.)
(in.)
1/8
.025
3/16
.028
1/4
.035
5/16
.035
103-FS
3/8
.035
7/16
.035
1/2
.035
5/8
.049
3/4
.049
7/8
.049
27
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
3/8
.035
1/2
.035
5/8
.035
fax 1-800-605-2442
1
.058
1-1/8
.058
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
3/8
.035
1/2
.035
5/8
.035
500-FC
(mm)
(mm)
6
1.0
8
1.0
10
1.0
12
1.0
15
1.0
16
1.0
525-F
525-F Unique, self-adjusting, tube holding mechanism permits flaring any size tubing
within the range of 3/16" to 5/8" (4.75 to 16 mm) O.D. tubing. Innovative,
single opening design is more compact and easier to use than conventional
multi-opening flaring bars. Faceted, hardened steel, chrome-finished cone
rolls out and burnishes perfect 45 flare above the tube holding mechanism
reducing need for deburring. Original wall thickness is maintained at base of
flare. Slip-on self-centering yoke permits use in tight quarters. Large handle,
with better leverage, and precision threads on feed screw make flaring effortless.
High quality construction with satin chrome and black finish. Wt. 1.75 lbs.
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
3/8
.035
1/2
.035
5/8
.035
(mm)
(mm)
4.75
1.0
6
1.0
8
1.0
10
1.0
12
1.0
15
1.0
(1) Insert tubing into adjustable opening of tube holding assembly. Position end of
tubing approximately 1/8" above the surface of holder.
16
1.0
1/8"
(2) Tighten clamp screw approximately 1/2 to 3/4 of a turn beyond free travel position
to secure tubing.
(3) Be certain flaring cone surface is oiled. Slip yoke over tube holding assembly centering
on tubing. Twist yoke clockwise to lock in position. Turn yoke handle clockwise to flare.
fax 1-800-605-2442
28
271-F
93-FB
SWIVEL-TYPE BALL
BEARING CONE
Ball thrust bearing in flaring
cone minimizes friction,
makes operation easier.
(1) Screw down flarlng cone with proper size adapter in tube. Retract cone,
remove adapter, complete flare.
(2) SWIVEL-TYPE BALL BEARING CONE- Ball thrust bearing in flaring cone
minimizes friction, makes operation easier.
29
fax 1-800-605-2442
37 FLARING TOOLS
37 FLARING TOOL
For 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" O.D. tubing.
437-FB For use with soft copper, aluminum and brass tubing. Hardened steel, chrome-finished
cone makes exceptionally smooth, high strength flares with a radius at base of
flare instead of the sharp angle formed by ordinary tools. New slip-on yoke permits
use in tight quarters, allows flaring where there is little space between nut and tube
end. New feed screw design provides smooth, easier operation. Positive gripping and
self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp
action. Satin chrome and black finish. Wt. 1.75 lbs.
Outside Tube Diameter
Wall Thickness
(in.)
(in.)
3/16
.032
1/4
.032
5/16
.032
3/8
.032
1/2
.035
5/8
.035
437-FB
FORMS STRONGER FLARESStronger flares assured by
smooth, even radius formed
at base of every flare by
engineered chamfer.
(in.)
(in.)
3/16
.032
1/4
.032
5/16
.032
3/8
.032
1/2
.035
5/8
.035
(mm)
(mm)
6
1.0
8
1.0
10
1.0
12
1.0
15
1.0
16
1.0
fax 1-800-605-2442
30
37 FLARING TOOLS
37 ROL-AIR FLARING TOOLS
For 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" O.D. tubing.
400-F Forms 37 flares to government specifications in steel, stainless steel (including
MIL-T-6845), titanium and other metal tubing. Positive stop gauge assures
correct size of flare. Special burnishing action polishes flare face. Three rollers
in flaring cone roll out 37 flare above die block. Roller action cuts effort
required; maintains original wall thickness - eliminates stress concentration.
Extension on yoke for clamping in vise. Satin chrome and black finish.
Furnished in sturdy tool case. Wt. 2.5 lbs.
401-FA Reaming yoke for 1/4" to 5/8" O.D. tubing. Recommended for use with steel
and stainless steel tubing for proper flaring. Wt. 0.7 lbs.
402-FA Flaring and reaming kit. Contains No. 400-F Flaring Tool and No. 401-FA
Reaming Yoke for 1/4" to 5/8" O.D. tubing. In tool case. Wt. 3.2 Ibs.
400-F
(in.)
(in.)
3/16
.035
1/4
.049
5/16
.049
3/8
.065
1/2
.065
5/8
.065
402-FA
For 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" O.D. tubing.
447-F
31
(in.)
(in.)
1/8
.032
3/16
.032
1/4
.035
5/16
.049
3/8
.049
1/2
.049
447-F
fax 1-800-605-2442
37 FLARING TOOLS
LARGE SIZE 37 ROL-AIR FLARING TOOLS
For 3/4", 7/8", 1", 1-1/4", 1-1/2" and 2" O.D. tubing.
Three cylinders in flaring cone roll out 37 flare above die block. Flares soft steel, copper, aluminum
and fully annealed stainless steel tubing. Roller action cuts effort required; maintains original
wall thickness; eliminates stress concentration. Feed release and burnishing action. Vise clamp
extension on yoke. Heat treated dies clamp tubing without marking it. Satin chrome and black
finish. Furnished in tool case.
537-F Flares and burnishes 3/4", 7/8", 1" and 1-1/4" O.D. tubing.
Wt. 13.0 lbs.
637-F Flares and burnishes 1-1/4", 1-1/2" and 2" O.D. tubing.
Wt. 13.0 lbs.
*Conforms to Federal Specification GGG-F-451a,Type 1, Class 1, Style B..
537-F
(in.)
(in.)
3/4
.065
7/8
.065
1
.065
1-1/4
.083
(in.)
(in.)
1-1/4
.083
1-1/2
.083
2
.083
407-FA
407-F Same as 407-FA, except includes the facing and deburring attachments.
S74460 Internal deburring tool for 1/8" to 1/2" O.D. tubing.
S74455 Internal deburring tool for 5/8" to 1-1/2" O.D. tubing.
S74447 External deburring tool.
S74462 Facing tool.
fax 1-800-605-2442
.028
.028
.028, .035
.035
.049
.049
.035, .049
.035
.049
.049, .065
32
Flares and swages 6 sizes of soft copper, aluminum or brass tubing. Makes both 45
and 37 single flares. Fast cam lever operation. Portable and vise or bench mountable.
Change sizes quickly. Built in gauge for accurate flare size or swage depth. Unique
jaws provide a positive non-slip grip on tubing. Wt. 6.5 lbs.
Outside Tube Diameter
Wall Thickness
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
M k
Swages 6 sizes.
3/8
.035
1/2
.035
5/8
.035
555-FS
45& 37Fl
293-F
94-S
NEW
94-S
95-S
33
95-S
6 IN 1 SWAGING TOOL
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
3/8
.035
195-SA
193-S
1/2
.035
5/8
.035
93-S-03
93-S-04
93-S-05
93-S-06
93-S-08
93-S-10
93-S-12
93-S-14
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
fax 1-800-605-2442
.028
.035
.035
.035
.035
.035
.035
.045
.20
.20
.25
.25
.50
.50
.75
1.0
(lbs.)
Flares and swages. Converts quickly. Screw-type feed. Ideal for use in close
quarters. Two bars included cover 9 sizes. Swivel-type swaging adapters and
flaring cone are hardened steel chrome-finished for easy operation.
Self-centering, slip-on forged steel yoke. In tool case. Wt. 3.5 Ibs.
Flares 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and 3/4" O.D.
Includes 5 swage adapters that swage 7 tube sizes 3/16", 1/4", 5/16", 3/8",
1/2", 5/8", 3/4" O.D.
Replacement parts: 278-FS-03X04X06 Adapter
278-FS-10 Adapter 5/8".
3/16", 1/4", 3/8".
278-FS-12 Adapter 3/4".
278-FS-05 Adapter 5/16".
S38600 Flaring Cone.
278-FS-08 Adapter 1/2".
275-FSM Metric flaring and swaging tool. Same as 275-FS except for metric size
tubing 4 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 15 mm, 16 mm,
18 mm, 22 mm O.D. tubing. In tool case. Wt. 3.5 lbs.
Replacement parts: 278-FSM4-6-10 Adapter
278-FSM-15 Adapter 15 mm.
4 mm, 6 mm, 10 mm.
278-FSM-16 Adapter 16 mm.
278-FSM-8 Adapter 8 mm.
278-FSM-18 Adapter 18 mm.
278-FSM-12 Adapter 12 mm.
278-FSM-22 Adapter 22 mm.
278-FSM-14 Adapter 14 mm.
S38600 Flaring Cone.
O
P
F
275-FS
271-F
(in.)
(in.)
1/8
.020
3/16
.028
1/4
.035
5/16
.035
3/8
.035
7/16
.035
1/2
.035
5/8
.035
3/4
.035
(mm)
(mm)
4
1.0
6
1.0
8
1.0
10
1.0
12
1.0
14
1.0
15
1.0
16
1.0
18
1.0
22
1.0
45 SWAGING TOOL
For 1/2", 5/8" and 7/8" O.D. tubing.
194-S Screw-type flaring and swaging tool. Far easier to work with in close
quarters than punch type tools. Perfect swaging alignment of tube every
time. Hardened steel chrome-finished adapters change quickly. In tool
case. Wt. 2.0 Ibs.
Replacement parts: 278-FS-08 Adapter 1/2".
278-FS-10 Adapter 5/8".
278-FS-14 Adapter 7/8".
194-S
fax 1-800-605-2442
34
175EX
1.
2.
3.
4.
5.
6.
35
1" head
1-1/8" head
1-3/8" head
1-5/8" head
fax 1-800-605-2442
For flaring, cutting and bending soft copper, aluminum and brass tubing.
121-F
TC-1000
122-FA
TC-1000
123-FA
TC-1000
124-FA
TC-1000
1226-FA
TC-1000
FLARING TOOL
WEIGHT (lbs.)
375-FS (45)
2.75
2.75
2.75
120-F
1226-FA
2.75
3.0
124-FA
fax 1-800-605-2442
36
For flaring and cutting soft copper, aluminum, steel, stainless steel and brass tubing.
275-FSC
For copper, aluminum, steel, stainless steel and other metal tubing.
2000-FS Individual size jaw sets are used for positive clamping compactness
and operating convenience.
Socket head screws are provided for clamping the jaws to the yoke and feeding
the tube forming components. The screws are hand turned for all free travel
movement when advancing or retracting.
A hex socket and 3/8" square drive ratchet are furnished for easy operation
of the threaded members under load. Tube forming components (flaring cones,
double flaring adapters and swaging adapters) are retained on the feed screw
by a ball detent mechanism and can be snapped on and off for quick change
as required.
The tool is designed to permit hand held or vise mounted operation. Wt. 7.0 lbs.
Flaring - 37 and 45: Flares soft copper, brass, aluminum, steel and stainless
steel in nine tube sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" and
3/4" O.D. tubing.
Double Flaring - 45 Only: Double flares soft copper, aluminum and steel
(Bundy or G.M. to .035 wall) in seven tube sizes: 3/16", 1/4", 5/16", 3/8", 1/2",
5/8" and 3/4" O.D. tubing.
Swaging: Swages soft copper, aluminum and brass in seven tube sizes: 3/16",
1/4", 5/16", 3/8", 1/2", 5/8" and 3/4" O.D. tubing.
2000-FS
Flaring
Outside Tube Diameter
Wall Thickness
(in.)
(in.)
1/8
.020
3/16
.028
1/4
.035
5/16
.035
3/8
.035
7/16
.035
1/2
.035
(in.)
(in.)
3/16
.028
1/4
.035
5/16
.035
3/8
.035
1/2
.035
5/8
.035
3/4
.035
5/8
.049
3/4
.049
Swaging
Outside Tube Diameter
Wall Thickness
37
fax 1-800-605-2442
TUBING TOOLS
For flaring, cutting and bending soft copper, aluminum and brass tubing.
TOOL
Tube Cutters
Metal Tubing
Tube Cutters
Thermoplastic
Rubber Hose
Saw Vise
Bending Tools
37 Flaring Tool
45 Double
Flaring Tools
Reaming and
Deburring Tools
Tube Constrictor
Swaging Tools
PAGE NO.
TC-1000
TC-1050
TC-2050
174-F
206-FB
227-FA
312-FC
406-FA
206-FBP
307-FP
327-FP
384-FA
101-F
102-F
112-F
163-F
260-FHA
270-F
350-FHA
364-FH
364-FHA
364-FHAM
364-FHB
364-FHBM
367-FH
368-FH
370-FH
371-FH
564-FH
600-F
700-F
400-F
407-FA
437-FB
447-F
507-FB
555-FS
537-F
637-F
2000-FS
103-FS
195-FC
203-FA
275-FS
296-FC
300-FB
375-FS
376-FS
395-FAM
500-FC
500-FCM
525-F
17
18
18
17
18
17
17
18
18
19
19
18
21
21
21
21
24
25
24
22
22
22
22
22
21
21
21
21
23
26
26
31
32
30
31
30
33
32
32
37
27
27
27
34
27
27
27
27
27
28
28
28
555-FS
2000-FS
93-FB
195-FB
2000-FS
208-F
208-FSS
TC-1020
93-S
94-S
95-S
193-S
194-S
195-SA
275-FS
555-FS
2000-FS
293-F
33
37
29
29
37
40
40
17
33
33
33
33
34
33
34
33
37
33
(5)
SOFT
(5)
TYPE K
BENDING
TEMPER-HARD
(5)
HARD
SOFT
(5)
(5)
TYPE L
BENDING
TEMPER-HARD
(5)
HARD
TYPE M
(5)
(5)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
TUBING TOOLS
45 Flaring Tool
PART NO.
TUBE MATERIAL
COPPER
Metric Bubble
Flaring Tool
*See page 20 for specialized cutters.
(1) Heavy duty cutting wheel No. S75046 is recommended for continuous service with steel, stainless steel, monel, titanium and hard temper copper tubing.
(2) Type M tubing should be torch annealed before flaring.
(3) No.364-FHA, 1" size should be used only with annealed (softened) non-ferrous tubing.
(4) Not to be used with metal reinforced hose.
(5) When cutting metallic tubing you must switch to standard wheel furnished.
fax 1-800-605-2442
38
TUBING TOOLS
For flaring, cutting and bending soft copper, aluminum and brass tubing.
Tube Cutters
Thermoplastic
Rubber Hose
Saw Vise
Bending Tools
37 Flaring Tool
37 Flaring Tool
45 Double
Flaring Tool
Reaming
& Deburring Tools
Tube Constrictor
Swaging Tools
PART NO.
PAGE NO.
TC-1000
TC-1050
TC-2050
174-F
206-FB
227-FA
312-FC
406-FA
206-FBP
307-FP
327-FP
384-FA
101-F
102-F
112-F
163-F
260-FHA
270-F
350-FHA
364-FH
364-FHA
364-FHAM
364-FHB
364-FHBM
367-FH
368-FH
370-FH
371-FH
564-FH
600-F
700-F
400-F
407-FA
437-FB
447-F
507-FB
555-FS
537-F
637-F
2000-FS
103-FS
195-FC
203-FA
275-FS
296-FC
300-FB
375-FS
376-FS
395-FAM
500-FC
500-FCM
525-F
17
18
18
17
18
17
17
18
18
19
19
18
21
21
21
21
24
25
24
22
22
22
22
22
21
21
21
21
23
26
26
31
32
30
31
30
33
32
32
37
27
27
27
34
27
27
27
27
27
28
28
28
555-FS
2000-FS
93-FB
195-FB
2000-FS
208-F
208-FSS
TC-1020
93-S
94-S
95-S
193-S
194-S
195-SA
275-FS
555-FS
2000-FS
293-F
33
37
29
29
37
40
40
17
33
33
33
33
34
33
34
33
37
33
SIZE RANGE
ANNEALED
TUBE O.D. (in.) ALUMINUM
(SOFT)
1/8 - 1-1/8
1/8 - 5/8
3/16 - 7/8
3/8 - 1-1/8
3/8 - 2-5/8
1/8 - 3/4
1/8 - 1-5/8
2 - 4-1/8
3/8 - 2-5/8
1/16 - 1/2 (4)
1/8 - 13/16 (4)
1/8 - 1-1/2
1/4 - 5/8
1/4 - 3/4
1/4 - 3/8
1/4 - 5/8
1/4 - 7/8
3/8 - 1-1/8
1/4 - 3/4
1/8 - 3/16
1/4 - 1
6 -12 mm
1/4 - 1/2
6 -12 mm
1/8, 3/16, 1/4
1/4, 5/16, 3/8
1/4, 3/8, 1/2
8,10,12 mm
3/8, 1/2
1/4 - 3/4
1/4 - 3/4
3/16 - 5/8
1/8 -1-1/2
3/16 - 5/8
1/8 - 1/2
3/16 - 5/8
3/16 - 5/8
3/4 - 1-1/4
1-1/4 - 2
1/8 - 3/4
3/4 - 1
3/16 - 5/8
5/8 - 1-1/8
1/8 - 3/4
3/16 - 5/8
3/16 - 5/8
1/8 - 3/4
1/2 - 3/4
4 -16 mm
3/16 - 5/8
6 -16 mm
3/16 - 5/8
4. 75 - 16 mm
3/16 - 5/8
1/8 - 3/4
3/16 - 1/2
1/4 - 3/4
3/16 - 3/4
3/16 -1-1/2
3/16 -1-1/2
1/8 - 1-1/8
3/16 - 7/8
1/2, 5/8, 7/8
3/16 -5/8
1/4 - 5/8
1/2 - 7/8
1/4 - 5/8
3/16 - 3/4
3/16 - 5/8
3/16 - 3/4
4.75 - 10 mm
(5)
ANNEALED
BRASS
(SOFT)
(5)
SAE 1020
(SOFT)
(5)
(5)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(5)
(5)
Metric Bubble
Flaring Tool
*See page 20 for specialized cutters.
(1) Heavy duty cutting wheel No. S75046 is recommended for continuous service with steel, stainless steel, monel, titanium and hard temper copper tubing.
(2) Type M tubing should be torch annealed before flaring.
(3) No.364-FHA, 1" size should be used only with annealed (softened) non-ferrous tubing.
(4) Not to be used with metal reinforced hose.
(5) When cutting metallic tubing you must switch to standard wheel furnished.
39
TITANIUM
fax 1-800-605-2442
(5)
PINCH-OFF TOOL
For 1/4" to 1/2" O.D. tubing.
Temporarily closes soft copper, aluminum or steel tubing so no liquid or gas passes sealed
part. Lets you disconnect Iine while making repairs without loss of liquid or gas. Also opens
tubing to allow flow.
105-FF Pinch-Off Tool for 1/4", 5/16", 3/8" and 1/2" O.D. tubing. Wt. .75 lbs.
105-FF
140-F-04
140-F-06
140-F-08
140-F-10
140-F-12
140-F-14
140-F-18
140-F-22
140-F-26
1/4
3/8
1/2
5/8
3/4
7/8
1-1/8
1-3/8
1-5/8
S62641
S62648
S62655
S62661
S62666
S66434
S66435
S71174
S71177
140-F-06
ACCESSORIES &
WRENCHES
CATALOG NUMBER
142-F
45 REFACING TOOL
For 1/4", 5/16", 3/8" and 1/2" SAE 45 flare fittings.
Reams both inside and outside edges of tube with 3 hollow ground cutters. Tough die cast
body. Deburrs both clockwise and counterclockwise. Fluted body is shaped to fit comfortably
in palm.
345-FA With cutter and adapters for 1/4", 5/16", 3/8",1/2" and 5/8" fittings. Makes
nicked or marred seats on brass and other nonferrous fittings and valves as good
as new. Precision feed. Replaceable cutter. In tool case. Wt. 2.0 Ibs.
Adapters: 346-F-04 1/4" O.D., 346-F-05 5/16" O.D., 346-F-06 3/8" O.D., 346-F-08 1/2"
O.D., 346-F-10 5/8" O.D., S63412 Replacement Cutter
fax 1-800-605-2442
345-FA
40
RATCHET WRENCHES
199-F KWIK-TITE RATCHET WRENCHES
For 5/16" to 2-1/4" O.D. tubing and 7 mm to 32 mm hex sizes.
The Kwik-Tite ratchet wrench speeds installation of tube fittings and valves, hex nuts,
bolts and fasteners. This unique wrench, with its open jaw design, makes it easy to slip
onto fittings and fasteners, even in tight quarters. Flips quickly into tightening position
with a sure grip on all hex surfaces.
12 point contact distributes torque pressures evenly on the flats of the hex, not at the
corners. Eliminates warping and distorting of fittings and fasteners. Because of the
Kwik-Tite ratchet action, tightening jobs are easier and faster.
Kwik-Tite wrenches are constructed for rugged use. Jaws are hardened steel. Handles
are made of heavy gauge alloy steel, hardened and chrome plated.
Ratcheting of wrench requires
only 30 of movement.
SAE
ACCESSORIES &
WRENCHES
CATALOG NUMBER
41
199-F-05
199-F-06
199-F-07
199-F-08
199-F-09
199-F-10
199-F-11
199-F-12
199-F-13
199-F-14
199-F-15
199-F-16
199-F-17
199-F-18
199-F-19
199-F-20
199-F-22
199-F-24
199-F-26
199-F-28
199-F-30
199-F-32
199-F-34
199-F-36
5/16
3/8
271-F
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
1
1-1/16
1-1/8
1-3/16
1-1/4
1-3/8
1-1/2
1-5/8
1-3/4
1-7/8
2
2-1/8
2-1/4
5-3/8
5-3/8
5-3/16
5-3/8
5-3/8
7-1/32
7-1/8
7-3/16
9-1/8
9-3/32
9-1/4
9-9/32
13.59
13.59
13.59
13.59
13.84
13.84
13.84
14.21
14.21
14.21
14.53
14.53
METRIC
CATALOG NUMBER
199-F-07 mm
199-F-08 mm
199-F-09 mm
199-F-10 mm
199-F-11 mm
199-F-12 mm
199-F-13 mm
199-F-14 mm
199-F-15 mm
199-F-16 mm
199-F-17 mm
199-F-18 mm
199-F-19 mm
199-F-20 mm
199-F-21 mm
199-F-22 mm
199-F-23 mm
199-F-24 mm
199-F-27 mm
199-F-30 mm
199-F-32 mm
7
8
271-F
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
27
30
32
fax 1-800-605-2442
137.41
137.41
137.41
137.41
137.41
137.41
137.41
184.15
184.15
184.15
184.15
184.15
184.15
184.15
237.50
237.50
237.50
237.50
345.19
345.19
345.19
5.41
5.41
5.41
5.41
5.41
5.41
5.41
7.25
7.25
7.25
7.25
7.25
7.25
7.25
9.35
9.35
9.35
9.35
13.59
13.59
13.59
WRENCHES
WRENCHES
For Refrigeration and Air-Conditioning Service.
127-C Compressor access valve wrench. Chrome plated. Has 1/4", 3/8", 3/16"
and 5/16" square drive ratchets and is specially designed for use on
compressors with access valves in hard to reach places. Reversible ratchets.
127-CO Same as 127-C except with unique 25 offset that provides additional
convenience in hard to reach places.
123-C Rugged steel forged wrench. For use on small refrigerant cylinders,
shut-off valves, packing gland nuts, etc. Ratchet has 1/4" square drive and
raised face. Handle has 3/16" and 1/4" square drives and 1/2" hex.
124-C Combination wrench with the four sizes most needed for servicing
air-conditioning and refrigerator equipment:
9/16" hex for dust cap on access valves and plug oil check on compressor.
1/2" hex for compressor mounting bolts.
1/4" square for valve stem and service valves and old style
compressor valves.
3/16" square for valve refrigerant charging tanks.
125-C Rugged, steel forged wrench with four sizes covering almost any
application. Ratchet has 1/4" drive on one end; other end has 3/16"
and 5/16" square openings, plus 9/16" hex opening.
126-C Economy compressor access valve wrench. Chrome plated. Has 1/4", 3/8",
3/16" and 5/16" square drive ratchets and is specially designed for use on
compressors with access valves in hard to reach places. Reversible ratchets.
127-C
127-CO
123-C
124-C
125-C
ACCESSORIES &
WRENCHES
Each box end has 12 gripping teeth wont round corners of fasteners.
30 swing-arc for tight clearances.
Slim profile easy to carry and store.
Hardened chrome-moly steel for lifetime service.
Patented; Member tested and recommended by HANDYMAN CLUB OF AMERICA.
Lifetime Warranty.
10-S
Fits SAE 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" nuts and
bolts. In clamshell.
10-SM Fits Metric 8,10,12,13, 14, 15, 17 and 19 mm nuts and bolts. Black oxide
handle for easy differentiation from silver SAE model. In clamshell.
10-S18 12-pc SAE POP counter/shelf display.
10-SM18 12-pc Metric POP counter/shelf display.
10-S
10-SM
fax 1-800-605-2442
4042
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
ALPHA-INDEX
ITEM#
47
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
101-F ..............................21
175EX12..........................35
278-FS 12........................34
364-FHB 06 .....................22
423-HPS..........................10
102-F 04 .........................21
175EX14..........................35
199-F 26..........................41
278-FS 14........................34
364-FHB 07 .....................22
425-CAM.........................10
102-F 05 .........................21
175EX16..........................35
278-FSM 12.....................34
364-FHB 08 .....................22
425-CAP-D ......................10
102-F 06 .........................21
175EX18..........................35
199-F 28..........................41
278-FSM 14.....................34
364FHBM10MM ..............22
425-CB ............................10
102-F 07 .........................21
175EX22..........................35
199-F 30..........................41
278-FSM 15.....................34
364FHBM12MM ..............22
425-CK ............................10
102-F 08 .........................21
175EX26..........................35
278-FSM 16.....................34
364FHBM6MM ................22
425-CKB ..........................10
102-F 10..........................21
175EXC............................35
199-F 32..........................41
278-FSM 18.....................34
364FHBM8MM ................22
425-CKP ..........................10
102-F 12..........................21
175EXP............................35
278-FSM 22.....................34
367-FH ............................21
425-HPS..........................10
102-F 14..........................21
17-C ................................12
199-F 34..........................41
278-FSM 8.......................34
368-FH ............................21
426-CKP ..........................10
103-FS.............................27
18-C ................................12
199-F 36..........................41
278-FSM4-6-10...............34
370-FH ............................21
427-CKP ..........................10
105-FF.............................40
193-S ..............................33
19-C.............................7, 12
27-C ................................12
371-FH ............................21
428-CKP ..........................10
10-C ................................15
194-S ..............................34
2000-FS...........................37
293-F ..............................33
375-FS.............................27
429-CKP ..........................10
10-S ................................42
195-FB ............................29
201-F ..............................21
296-FC.............................27
376-FS.............................27
431-CM ...........................10
10-S18 ............................42
195-FC.............................27
203-FA ............................27
299-F ..............................41
384-FA ............................18
432-CM ...........................10
10SG..................................9
195-SA ............................33
206-FB ............................18
300-FB ............................27
395-C.............................6, 9
434-BKP..........................10
10-SM .............................42
199-F 05..........................41
206-FBP ..........................18
300-RH..............................9
395-CD ..........................6, 9
434-RKP..........................10
10-SM18 .........................42
199-F 06..........................41
208-F ..............................40
300-RL ..............................9
395-CKP.........................6, 9
435-CKP.........................5, 9
112-F ..............................21
199-F 07..........................41
208-FSS...........................40
307-FP ............................19
395-FAM .........................27
436-CKP.........................5, 9
120-F ..............................36
20-A ............................7, 12
312-FC.............................17
396-C.............................6, 9
437-FB ............................30
121-F ..............................36
199-F 08..........................41
21-H..................................7
327-FP ............................19
396-CD ..........................6, 9
441-CB ............................10
1226-FA ..........................36
21-L ..................................7
335-CKP ............................6
396-CKP.........................6, 9
441-CBM .........................10
122-FA ............................36
199-F 09..........................41
227-FA ............................17
336-CKP ............................6
397-CD ..........................6, 9
441-CR ............................10
123-C ..............................42
23-C ................................12
341-C ..............................15
398-C.............................6, 9
441-CRM .........................10
123-FA ............................36
199-F 10..........................41
241-F 03..........................14
3423IP.............................10
398-CD ..........................6, 9
447-F ..............................31
124-C ..............................42
241-F 04..........................14
3425CIP...........................10
399-F ..............................41
450-C.............................5, 9
124-FA ............................36
199-F 11..........................41
241-F 05..........................14
345-FA ............................40
400-F ..............................31
451-C.............................5, 9
125-C ..............................42
241-F 06..........................14
346-F 04..........................40
400-RB ........................9, 10
451-CB ............................10
126-C ..............................42
199-F 12..........................41
2423P..............................10
346-F 05..........................40
401-C ................................6
451-CBM .........................10
127-C ..............................42
2425CP............................10
346-F 06..........................40
401-FA ............................31
451-CR ............................10
127-CO ............................42
199-F 13..........................41
24-C ................................12
346-F 08..........................40
402-FA ............................31
451-CRM .........................10
12-C ................................15
25-K ................................12
346-F 10..........................40
405-RH..............................9
452-C.............................5, 9
140-F 04..........................40
199-F 14..........................41
260-FHA..........................24
350-FHA..........................24
405-RL ..............................9
452-CB ............................10
140-F 06..........................40
26-C ................................12
360-FHA..........................24
406-FA ............................18
452-CR ............................10
140-F 08..........................40
199-F 15..........................41
270-F ..............................25
364-FH 02 .......................22
407-F ..............................32
466-C ................................6
140-F 10..........................40
270-F 06..........................25
364-FH 03 .......................22
407-FA ............................32
494-C.............................5, 9
140-F 12..........................40
199-F 16..........................41
270-F 08..........................25
364-FHA 04.....................22
415-C.............................5, 9
495-C.............................5, 9
140-F 14..........................40
270-F 10..........................25
364-FHA 05.....................22
416-C.............................5, 9
496-C.............................5, 9
140-F 18..........................40
199-F 17..........................41
270-F 12..........................25
364-FHA 06.....................22
417-C.............................5, 9
498-C.............................5, 9
140-F 22..........................40
270-F 14..........................25
364-FHA 07.....................22
418-C.............................5, 9
500-C.............................5, 9
140-F 26..........................40
199-F 18..........................41
270-F 16..........................25
364-FHA 08.....................22
420-C ........................... 5, 9
500-FC.............................28
142-F ..............................40
270-F 18..........................25
364-FHA 10.....................22
421-C.............................5, 9
500-FCM .........................28
144-F ..............................20
199-F 19..........................41
271-F ..............................25
364-FHA 12.....................22
422-C.............................5, 9
500-RH..............................9
144-FB ............................20
275-FS.............................34
364-FHA 14.....................22
422-CB ............................10
500-RL ..............................9
163-F ..............................21
199-F 20..........................41
275-FSC...........................37
364-FHA 16.....................22
422-CR ............................10
505-C.............................5, 9
16-C ................................12
275-FSDC ........................37
364FHAM10MM..............22
423-CAM.........................10
507-FB ............................30
174-F ..............................18
275-FSM .........................34
364FHAM12MM..............22
423-CAP-D ......................10
507-FBM .........................30
175-EX ............................35
199-F 22..........................41
278-FS 03X04X06............34
364FHAM6MM................22
423-CK ............................10
510-C.............................4, 8
175EX06..........................35
278-FS 05........................34
364FHAM8MM................22
423-CKB ..........................10
510-CM..........................4, 8
175EX08..........................35
278-FS 08........................34
364-FHB 04 .....................22
423-CKP ..........................10
511-C.............................4, 8
175EX10..........................35
199-F 24..........................41
278-FS 10........................34
364-FHB 05 .....................22
423-CR ............................10
511-CM..........................4, 8
ALPHA-INDEX
ALPHA-NUMERICAL INDEX
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
ITEM#
PAGE #
715-C.............................2, 8
808-MRR.........................11
IR-94TP ...........................45
S62292............................25
S76637 ......................17, 20
513-C.............................4, 8
717-C.............................2, 8
808-MRY .........................11
KCK-F ..............................13
S62294............................25
S77511............................20
520-C.............................4, 8
718-C.............................2, 8
812-MRB.........................11
KCK-M .............................13
S62295............................25
S77615............................19
520-CA .......................4, 7, 8
720-C.............................2, 8
812-MRR.........................11
LT Posterset .....................46
S62296............................25
S7931801........................20
520-CAM....................4, 7, 8
721-C.............................2, 8
812-MRY .........................11
LTWD 1............................46
S62297............................25
S7958301........................11
521-C.............................4, 8
725-C.............................2, 8
903-MRB.........................11
P10000831......................46
S62298............................25
S7958302........................11
521-CA .......................4, 7, 8
750-C.............................2, 8
903-MRS .........................11
PT-109 ............................14
S62299............................25
S8058801........................24
521-CAM....................4, 7, 8
751-C.............................2, 8
903-MRY .........................11
S10000265......................11
S62300............................25
S8058901........................24
525-F ..............................28
755-C.............................2, 8
905-MRB.........................11
S10000770 ................18, 20
S62301............................25
S8114601........................24
535-C ..............................14
800-MBB.........................11
905-MRS .........................11
S16003162 ................17, 20
S62302............................25
S8115601........................19
536-FTY ..........................11
800-MBR.........................11
905-MRY .........................11
S38600............................34
S62303............................25
S8201501........................20
537-F ..............................32
800-MBS .........................11
906-MRB.........................11
S5951125........................13
S62304............................25
S8230301........................10
541-C ..............................15
800-MBY.........................11
906-MRS .........................11
S62156............................24
S62305............................25
S8425301........................24
542-C ..............................15
803-AB..............................7
906-MRY .........................11
S62244............................25
S62306............................25
S8426501........................24
545-C ..............................14
803-AR..............................7
93-FB ..............................29
S62245............................25
S62307............................25
S8426601........................24
548-FTY ..........................11
803-AS ..............................7
93-S 03............................33
S62246............................25
S62835............................25
S8442401........................24
555-FS.............................33
803-AY ..............................7
93-S 04............................33
S62247............................25
S62836............................25
S8485201........................24
560-FTY ..........................11
803-MAB...........................7
93-S 05............................33
S62250............................25
S62837............................25
S8487001........................24
564-FH 06 .......................23
803-MAR...........................7
93-S 06............................33
S62251............................25
S62838............................25
S8694401........................33
564-FH 08 .......................23
803-MAS...........................7
93-S 08............................33
S62252............................25
S62839............................25
S8771301........................33
564-FHT 06 .....................23
803-MAY ...........................7
93-S 10............................33
S62253............................25
S62840............................25
S8771601........................33
600-F ..............................26
803-MRB.........................11
93-S 12............................33
S62254............................25
S62841............................25
S8771701........................33
600-R ................................9
803-MRR.........................11
93-S 14............................33
S62255............................25
S62869............................25
S8771801........................33
601-R ................................9
803-MRS .........................11
94-S ................................33
S62257............................25
S63412............................40
S8920069........................13
602-R ................................9
803-MRY .........................11
953-MRB.........................11
S62258............................25
S66914............................24
S8920071........................13
620-C.............................3, 8
804-MRB.........................11
953-MRS .........................11
S62260............................25
S67842............................15
S8920072........................13
620-CS...........................3, 8
804-MRR.........................11
953-MRY .........................11
S62261............................25
S68478............................24
S8920073........................13
621-C.............................3, 8
804-MRS .........................11
955-MRB.........................11
S62262............................25
S68480............................24
S8920074........................13
621-CS...........................3, 8
804-MRY .........................11
955-MRS .........................11
S62263............................25
S68481............................24
S8920077........................13
622-C.............................3, 8
805-MAB...........................7
955-MRY .........................11
S62264............................25
S68483............................24
S8920082........................13
629-C.............................3, 8
805-MAR...........................7
956-MRB.........................11
S62265............................25
S68484............................24
S8920261........................13
630-CKP.........................3, 8
805-MAS...........................7
956-MRS .........................11
S62266............................25
S68485............................24
S8920263........................13
630-CKPS.......................3, 8
805-MAY ...........................7
956-MRY .........................11
S62268............................25
S68492............................24
S8921626........................11
631-CKP.........................3, 8
805-MRB.........................11
95-S ................................33
S62269............................25
S68493............................24
TB-52 ..............................46
631-CKPS.......................3, 8
805-MRR.........................11
9-C ..................................15
S62275............................25
S68496............................24
TC-1000...........................17
637-F ..............................32
805-MRS .........................11
G6400 .............................15
S62276............................25
S68497............................24
TC-1010...........................17
640-C.............................3, 8
805-MRY .........................11
G6600 .............................15
S62277............................25
S68502............................24
TC-1020...........................17
640-FC 04........................15
806-AB..............................7
GU1-4A ...........................15
S62278............................25
S74197............................20
TC-1050...........................18
640-FC 06........................15
806-AR..............................7
GU1-4B ...........................15
S62279............................25
S74447............................32
TC-2050...........................18
641-C.............................3, 8
806-AS ..............................7
IE-110 .............................43
S62280............................25
S74455............................32
TH-100............................46
642-C.............................3, 8
806-AY ..............................7
IE-120 .............................44
S62281............................25
S74460............................32
644-C.............................3, 8
806-MAB...........................7
IE-123 .............................43
S62282............................25
S74462............................32
645-C.............................3, 8
806-MAR...........................7
IE-124 .............................43
S62283............................25
S74754............................24
646-C.............................3, 8
806-MAS...........................7
IE-125 .............................44
S62284............................25
S74761 ......................18, 20
650-C.............................3, 8
806-MAY ...........................7
IE-130 .............................44
S62285............................25
S74762 ......................18, 20
651-C.............................3, 8
806-MRB.........................11
IE-136 .............................44
S62287............................25
S74833 ......................18, 20
652-C.............................3, 8
806-MRR.........................11
IE-155 .............................43
S62288............................25
S74834............................20
653-C ............................3, 8
806-MRS .........................11
IR-92 ...............................45
S62289............................25
S75015 ......................17, 20
700-CV ..............................9
806-MRY .........................11
IR-92TP ...........................45
S62290............................25
S75046 ......................17, 20
700-F ..............................26
808-MRB.........................11
IR-94 ...............................45
S62291............................25
S75531............................33
ALPHA-INDEX
512-C.............................4, 8
48
fax 1-800-605-2442
2005 Stride Tool Inc.
LT00101304
Click tabs on the sides of pages to jump to the first page of that section.
3
2
5
4