9768 Metro Radio Outdoor en Datasheet
9768 Metro Radio Outdoor en Datasheet
V1.0 B4
The Alcatel-Lucent 9768 Metro Radio Outdoor V1.0 B4 is a next-generation radio based on
Alcatel-Lucent Bell Labs groundbreaking lightRadio cube that brings together the latest innovations in antennas, amplifiers and transceivers to minimize size and improve radio frequency (RF)
performance. Operating in 3GPP Band 4 Blocks A through F (Advanced Wireless Services (AWS)
frequency bands), the 9768 MRO uses directional antennas to cost effectively extend 5-bar coverage and capacity to both indoor and outdoor locations. The Alcatel-Lucent 9768 MRO is small
enough to be mounted on a wall, the side of a building or pole, yet powerful enough to cover
places where a large number of subscribers congregate, such as stadiums, large enterprises,
and shopping malls.
Innovative architecture
Front
Back
Bottom
Features
Small, lightweight unit that is mountable
on a wall, the side of a building or pole
Integrated directional antennas enabling
higher throughput, lower interference
leading to a higher degree of sectorization
and greater power efficiency
Single Long Term Evolution (LTE) carrier
and sector
2 path Rx diversity and 2x2 MIMO enabled
by cross-polarization
Works with conventional or clustered BBUs
Compatible with the Alcatel-Lucent 9926
Digital 2U NodeB (d2U)
CPRI daisy chaining
Benefits
Easily deployable in optimal coverage
locations with one person installation
Provides high quality indoor and outdoor
coverage
Faster and more reliable data connections
and higher data throughput
RF characteristics
Operating band:
Technical specifications
Physical dimensions
Height: 421.6 mm (16.6 in.)
Width: 281.9 mm (11.1 in.)
Depth: 175.3 mm (6.9 in.)
Weight
10.9 kg (24 lb) without mounting kit
Power
Power supply: 120/240 V AC
Power consumption:
80 W (typical)
85 W (maximum)
Operating environment
Operating temperature: -40C to +50C
(-40F to +122F)
Carrier bandwidth:
10 MHz
Additionally supports 5 MHz, 10 MHz,
15 MHz, and 20 MHz (post-trial version)
Directional antennas with 7 dBi gain and
3 dB horizontal beam width of 80
Maximum transmission power:
1 W conducted output power (5 W EIRP)
at each antenna
64-QAM transmit error vector magnitude
(EVM) less than 7 percent at maximum
rated power
2 path receive diversity and 2x2 MIMO
(cross-polarized antennas)
Sensitivity: -104 dBm measured at each
antenna port
Baseband interconnection
Connects to Alcatel-Lucent 9926 d2U
Fiber optic connection with CPRI line rate 3
Two optical ports to support CPRI daisy
chaining with CPRI line rate 2-6
(post-trial version)
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented
is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright 2012 Alcatel-Lucent. All rights reserved. M2012011960 (February)