Professional Documents
Culture Documents
Change Ocb283 - Hc3.1
Change Ocb283 - Hc3.1
1 CHANGES
Page 1
Page 1
Page 2
NOTES
Page 2
Page 3
NOTES
Page 3
Charging
SMM
SMC
SMC
SMT2G
SMT2G
STS 1G
PCM
SMX
SMX
E
T
U
SMA
SMA
RCX
LR
LR
Page 4
NOTES
PCM: 32 TS, 8 bits per channel, 2 Mbit/s
LR: 32 TS, 16 bits per channel, 4 Mbit/s
Maximum connection capacity: 2048 LR
Page 4
Page 5
Page 5
SOLUTIONS
Change of switching network
Change of control
Change of LAN
Federating architecture
Multi-TU architecture
Open access to the Unix world, server connections
Page 6
NOTES
Change of control: performance objectives: 8 MBHCA at 0% IN, 4 MBHCA at 100% IN
Change of switching network: adoption of an ATM switching network
Change of LAN: MIS and MAS are replaced by 16 Mbit/s token ring (2 to 8 rings in N+1 config)
Change of stations: based around new processors (power PC and power QUICC), increasing station
performance by a factor of 10
Federating architecture: stations are standardized (general purpose)
Multi-TU architecture: PCM TUs are now complemented with SDH TUs and ATM TUs (HC3.2)
Open access to the Unix world: to increase our productivity and our responsiveness
Page 6
CONSTRAINTS
To retain a maximum of existing software
To retain compatibility with the current environment
To retain product modularity (range)
Page 7
Page 7
VCI
1
VCI 1
VCI 2
VPI 1
VCI 1
VCI 2
VPI 4
VCI
4
VCI
3
VPI
3'
VPI
1'
VCC
Virtual Channel Connections
VPI
2'
VPI 2
VCI 4
VPI 3
VCI 3
VCI 1
VCI 2
VPC
Virtual Path Connections
VPI 5
VP switching (VPC)
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 8
NOTES
VCI: Virtual Channel Identifier
Reference of a channel relative to a path. In the RCH-BE context, identifies a cell on a VPC between
two TCAs (temporal to composite ATM links).
VPI: Virtual Path Identifier
Reference of a virtual path.
In the OCB HC2.1 and HC3.1, only VP switching is included.
Page 8
7 6
GFC
VPI
VPI
VCI
2
3
VCI
PT
VCI
Bits
bytes
CLP
HEC
5 Header bytes
4
5
6
PAYLOAD
48 Payload
bytes
Fields
CLP
GFC
HEC
PT
: Payload Type
VCI
VPI
53
Page 9
NOTES
GFC
VPI
VCI
VPI
CLP
HEC
Page 9
AAL1
1b.
"defence"
7 bytes
Page 10
NOTES
Page 10
Charging
SMM
SMC
SMC
SMT2G
STS 1G
PCM
SCH
SCH
E
T
U
SMA
RCH
SMA
OCB HC2.1
Page 11
NOTES
- The HC2.1 release entails replacing the switching network with an ATM matrix.
- The OCB system at release HC2.1 does not offer additional bit rates to subscribers connected to it.
Page 11
Billing
Collector
CDRA
LSN Nectar
SMM
SMB_C
------
SMB_C
OCB HC3.1
Token ring
STS 1G
SMT2G
PCM / SDH
SMA
TS V5.2
SMB_XT
SMB_XT
E
T
U
SMB_A
N7
RCH
Page 12
NOTES
CDRA: Call Detail Record Application
DHA: Data Handling Application
Page 12
SMM_IT
SU2A
Billing
Collector
CDRA
LSN Nectar
SMB_C
------
SMB_C
Token ring
SMB_XT
STS 2G
PCM
SDH TDM
SDH ATM
SMB_XT
E
T
U
SMB_A
SMB_A
RCH
Page 13
NOTES
The HC product, from release HC3.2 requires the presence of NMC2.
ALCA: ATM Logical Connection Application
LRCP: Local RCP
Page 13
Performance
Number of
subscribers
Number of LR
links
Number of circuits
Number of
signalling routings
Number of
adjacent SPs
Number of SLCs
HC2.1
200 000
HC3.1
200 000
Target
500 000
2048
2048
16 384
16 384
60 000
255
60 000
255
480 000
255
480 000
511
255
255
255
511
434
434
3528
3528
Page 14
NOTES
In call handling terms:
330 CA/s with the conventional OCB, up to 2000 CA/s with the OCB HC.
That is: 1.2 MBHCA with the conventional OCB, 7.2 MBHCA with the OCB HC.
Page 14
HC2.1
HC3.1
Target OCB HC
CDRA
DHA
LSN NECTAR
MAS
RCH
SMA (SS7)
SMA
SMB_A V5.2
SMB_XT
SCH
SMX
Page 15
NOTES
Page 15
Page 16
NOTES
Page 16
PCM
SMX
SMX
E
T
U
SMA
SMA
Non HC OCB
RCX
LR
Token ring
SMT2G
PCM / SDH
SMA
TS V5.2
SMB_XT
SMB_XT
E
T
U
LR
RCH
SMB_A
N7
OCB HC3.1
Page 17
NOTES
Page 17
ATM matrix
Cell assembly
LR
or
LRH
Cell
switching
ATM links
AEI
80 Gbit/s
(128x622 Mbit/s)
Cell disassembly
1 AEI
622 Mb/s
128 LR
RCTCA2
16 AEI
bidirect.
622 Mb/s
BBASE
Page 18
NOTES
The assembly comprising RCTCA2 boards is for connecting 16384 LR links at 4 Mbit/s.
The assembly comprising BBASE boards switches up to 128 AEI links at 622 Mbit/s, or a switching
matrix at 80 Gbit/s.
Page 18
Connection
+
Cell assembly/disassembly
ATM matrix
BBASE
RCTCA2
128 LR
15
16 AEI ports
RCTCA2
2048 LR capacity
Page 19
NOTES
16 BBASE ports.
128 LR on each RCTCA2.
Or a capacity of 2048 LR.
Page 19
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
BBASE
N1
BBASE
N2
.
. of 16 384 LR
128 LR * 8 RCTCA2 * 16 BBASE Capacity
.
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
RCTCA2
BBASE
N16
BBASE
N17
.
.
.
.
.
BBASE
N24
Page 20
NOTES
Page 20
Page 21
NOTES
Page 21
Page 22
NOTES
Page 22
Connection appliques
RAGLR2
One AEI link
128 LR
RALALR
One AEI link
64 LR + 1 LAH
RALAH
One AEI link
Two LAH
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 23
NOTES
LAH: High capacity access link, equivalent to 64 LR (8GLR).
Page 23
3 - PRACTICAL WORK
Using the HC3 GUIMES
3.1. Conformity
Using the GUIMES (Commissioning Guide)
Checking racks and HC3.1 dedicated boards
Checking the programming of HC3.1 boards and appliques
AACRH mini-boards in SM stations
AASBT appliques in SMB stations
IAIDA appliques in IBTUX subracks
Checking HC3.1 inter- and intra-racks connections
Page 24
NOTES:
Page 24
ETU
SCHA1
SCHAi
Coupleur
Coupleur
I
C
L
/
I
S
L
TCA0
...
TCA2
TCA3
I
C
L
/
I
S
L
...
I
C
L
/
I
S
L
Branche A
...
ASE0
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 25
NOTES
Page 25
Constraints
Compatibility with existing systems
Page 26
NOTES
Page 26
SMM
One 4 or 16 Mbit/s token ring
MIS
SMC
------
SMC
SMT2G
SMT2G
SMX
SMX
E
T
U
SMA
SMA
RCX
LR
Page 27
NOTES
Each ring comprises two branches A and B operating in loadsharing mode.
Page 27
Server platform
SMM
SMB_C
-----
SMB_C
Token ring
STS 1G
SMT2G
PCM / SDH
SMA
TS V5.2
SMB_XT
SMB_XT
E
T
U
SMB_A
N7
RCH
Page 28
NOTES
Page 28
In HC3.1 technology
Two to eight 16 Mbit/s token rings operating in N+1
configuration
Page 29
NOTES
Page 29
Servers
Servers
Servers
10 Mbit/s Ethernet bus
Duplicated, loadsharing
SMB GW
SMB GW
Page 30
NOTES
Page 30
Billing
Collector
CDRA
LSN Nectar
SMM
SMB_C
-----
SMB_C
OCB HC3.1
Token ring
STS 1G
SMT2G
PCM / SDH
SMA
TS V5.2
SMB_XT
SMB_XT
E
T
U
SMB_A
N7
RCH
Page 31
NOTES
Page 31
Page 32
NOTES
These processors replace the Motorola 68020 and 68030 processors.
Page 32
NEW FORMAT
12-layer printed circuits
Appliques supporting wiring connectors
Page 33
NOTES
Page 33
Main concepts
Drawer
Appliques
Back plane
Boards
Page 34
NOTES
Page 34
Page 35
NOTES
Page 35
Connectors
Page 36
NOTES
Page 36
Page 37
NOTES
Page 37
Each
Dialogue
between a board and its appliques is conducted via the LAB bus
(Local Access Bus)
Page 38
NOTES
There are three types of agent (processing processor, I/O coupler, sig coupler).
The convention is to refer to a board, an agent and its appliques.
The agents communicate via a Multiprocessor Memory Bus.
Page 38
SMB
I/O
I/O
I/O
SAB (A)
SAB (B)
LAB BUS
MLA
bus
Signalling
Processor block
Processor block
Processor block
Interchange memory
Interchange memory
Interchange memory
Page 39
NOTES
The SMB station comprises five bus types:
MMB bus:
Synchronous, 320 Mbit/s, 32 bits.
Handles interchanges between the various agents within a station.
LAB bus:
Multiplexed at up to 200 Mbit/s, 32 bits.
Handles interchanges between a board, an agent and its appliques. Its architecture
enables several appliques to be linked to one board.
-MLA bus:
Bus multiplexed at 4 * 16 Mbit/s (4 GLR).
Handles interchanges between the SAB functions and signalling coupler agents, conveys
signalling information from the switching network.
ICL bus:
Asynchronous, serial, 4 Mbit/s.
Handles interchanges between the ETUs and the control station.
ISL bus:
Asynchronous, serial, 512 kbit/s or 1 Mbit/s.
Handles interchanges between control and station elements (ETU included) for:
Hardware fault supervision.
Reset control in the context of ETUs.
Page 39
CONNECTION
Connected to the MMB bus
Connectable to a local LAB bus
IMPLEMENTATION
Motorola Power PC 750 processor
512 Mb of RAM
Page 40
NOTES
The ACPWU board is connected to the MMB bus since, as the station's processor, it has to
exchange information with the SMB's other agents.
It can be connected to the LAB if it has to manage appliques.
Page 40
FUNCTION
Secondary agent
Multiprotocol signalling coupler agent
CONNECTION
Connected to the MLA bus
Connected to the MMB bus
IMPLEMENTATION
Motorola Power PC 750 processor
512 Mbytes of RAM
Three signalling functions, each comprising:
Eight signal processors, Texas Instruments DSPs
A PQUICC processor
Page 41
NOTES
The ACMPR board has an ADSMO daughter board. Together, they handle the functions described
here.
This board is interfaced with the LA links (from the SAB) that are multiplexed to form the MLA bus.
Page 41
FUNCTION
ICL/ISL I/O coupler agent
CONNECTION
Connected to the LAB bus
IMPLEMENTATION
Three processing functions, each having:
A PQUICC processor
Page 42
NOTES
The AUCAUX board handles, among other things:
-ICL/ISL coupler
-MAL
-timekeeping
Page 42
Processor
Token ring I/O coupler
Ethernet I/O coupler
Signalling coupler
Page 43
Page 43
Function
Interface for two 10 Mbit/s Ethernet links
Ethernet 0
HUB A
LAB
ACPWU
AAETH
bus
Ethernet 1
HUB B
S
E
R
V
E
R
S
Page 44
NOTES
Page 44
Function
Timebase interface, ICL/ISL and MAL adapter
ACPWU
LAB
bus
ACAUX
AAAUX
External links:
ICL/ISL
clock
MAL
Page 45
NOTES
Page 45
Function
Coupler for two token rings, 16 Mbit/s
ACPWU
AATRA
2 Token Ring
AATRA
2 Token Ring
LAB
bus
Page 46
NOTES
Page 46
Function
Link with a switching network. SAB function for 16 LR
ACMPR
AAMLA
16 LR
X
RCH
branch A
MLA
bus
AAMLA
16 LR
X
RCH
branch B
Page 47
NOTES
If an applique develops a fault, the SMB remains operational.
Page 47
AATAD
MMB, MLA and ISL bus impedance matching
Alarm ring insertion (MAL)
AATAD
MAL
SMB agents
Page 48
NOTES
Page 48
Function
15 other stations
AATCU
ACPWU
AATRA
AATCU
LAB
bus
AATCU
AATRA
AATCU
Ring 1
Ring 2
Ring 3
Ring 4
Page 49
NOTES
The AATCU appliques does not belong to an appliques but can be installed in it.
It is used to insert 16 stations on the same token ring.
Page 49
Board: AE35B
Applique: AA35B2
Page 50
NOTES
Page 50
Page 51
NOTES
Page 51
rings (CMS)
One or more processor units
Page 52
NOTES
Page 52
Page 53
NOTES
Page 53
AA35B2
AASBT
AAAUX
AAxxx
AAxxx
AATAD2
AE35B
ACAUX
ACxxx
ACxxx
ACxxx
ACPWU
SMB_5
Page 54
NOTES
Page 54
AAAUX
AATRA
AAxxx
AAxxx
AAxxx
AAxxx
AATAD2
ACAUX
ACxxx
ACxxx
ACxxx
ACxxx
ACxxx
AASBT
ACPWU
ACPWU
AA35B2
AE35B
SMB_8
AE35B
Page 55
NOTES
Page 55
AASBT
AAAUX
AAxxx
AAxxx
AAxxx
AAxxx
AAxxx
AAxxx
AAxxx
AATAD2
ACxxx
ACAUX
ACxxx
ACxxx
ACxxx
ACxxx
ACxxx
ACxxx
ACxxx
ACxxx
AA35B2
AA35B2
AE35B
SMB_10
AE35B
AE35B
Page 56
NOTES
Page 56
T
A
D
A
C
P
W
U
A
C
A
U
X
A
C
P
W
U
A
U
X
T
R
A
A
E
3
5
B
Time
ICL/ISL
Page 57
NOTES
Page 57
T
A
D
A
C
P
W
U
A
C
A
U
X
A
C
M
P
R
A
C
P
W
U
Multiplexed LA
A
U
X
M
L
A
M
L
A
T
R
A
E
T
H
A
E
3
5
B
A
E
3
5
B
Time
ICL/ISL
LR to
network
Two token
rings
Two
Ethernet
links
Page 58
NOTES
Page 58
Subrack : RBRCH
HIGH RATE MATRIX CONTROL STATION
1/2 SCH subrack: two TCA slots, four ASE slots
HC2 version (2048 LR) ASE slots mostly unused
SCH A
SCH B
Page 59
NOTES
Page 59
SMB
Two local buses with two
slots and two local buses
with three slots
Page 60
NOTES
Page 60
TU module
RCH
Branch B
Page 61
NOTES
Page 61
RCH
Branch A
SMB
5 slots
RCH
Branch B
Page 62
NOTES
Page 62
SMB 8 slots
Compact
Small
STS + SSE
SMB 8 slots
Compact
Small
Page 63
NOTES
Page 63
Tiroir de lovage
BAIE HC01
Ventilation imprative
UNITE DE VENTILATION
Bac
Scurisation N+1
UNITE DE VENTILATION
Bac
UNITE DE VENTILATION
Bac
Page 64
NOTES
Page 64
HR_00 rack
HC 2.1. configuration
RBRCH
UNITE DE VENTILATION
UNITE DE VENTILATION
RBRCH
UNITE DE VENTILATION
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 65
NOTES
En HC2.1, on trouve la baie HR_00 avec le bac du milieu vide.
En HC2, on ne parle pas de module. Un RCH de 2048 LR est constitu physiquement de 4 SCHi (
1<i<4 ). Chaque SCHi gre un maximum de 512 LR en utilisant le bac d extension situ en bas de
baie HR00.
Page 65
E10
ADM
E10
ADM
SDH
2 Mbit/s PCM link
ADM
ADM
E10
E10
Page 66
NOTES
ADM: Add & Drop Multiplexer.
Converts a 2 Mbit/s PCM link to an SDH link.
For example, an STM1 SDH link at 155 Mbit/s (in HC3.1).
Page 66
Page 67
NOTES
Page 67
Page 68
NOTES
Page 68
Page 69
NOTES
GLR = group of LR links = 8 LR
LAH = 8 GLR = 64 LR
Page 69
SMB
SMB
External
network
63VC12
ETU
LAH
Internal network
Branch A
Internal network
Branch B
Page 70
NOTES
Each TU is managed by a pair of SMBs.
STM1 SDH: 155 Mbit/s.
63VC12: Conveys the equivalent of 63 2 Mbit/s PCM links.
The links between SDH TU and RCH are by LAH, equivalent to 64 LR.
Page 70
ETU
63VC12
SDH lines
ETU
63VC12
SDH lines
ETU
63VC12
SDH lines
ETU
63VC12
LAH
SAB
SAB
Carte
ALS
ALS
board
SAB
SAB
ETU
63VC12
Redundancy appliques
Backup ETU
Page 71
NOTES
Each applique receives two SDH lines (1+1 protection).
The ALS board is for connecting the backup LAH to the protected LAH.
The RAB and ALS boards are controlled from the backup ETU.
Page 71
ETU to back up
RAB bus
SDH lines
ETU
63VC12
SDH lines
ETU
63VC12
SDH lines
ETU
63VC12
SDH lines
ETU
63VC12
LAH
SAB
SAB
Carte
ALS
ALS
board
SAB
SAB
ETU
63VC12
Redundancy applique
Backup ETU
Page 72
NOTES
Page 72
ACPSI
Power input to TU subrack
ICALS
TU protection
ICS1C
Processing STM1 links carrying circuits in VC12 mode
Page 73
NOTES
The ICALS board has no applique.
Page 73
Page 74
NOTES
On the IASUP appliques, the lines are protected (1+1).
On IAS1E (electrical connection), the lines are not backed up. Lines typically used between two
buildings.
Page 74
IAILA
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAS1E
IAIRA
IAILA
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICS1C
ICALS
IAIDA
ICALS
ACPSI
AAPI48
IBTUX
Page 75
NOTES
Page 75
Billing
Collector
CDRA
LSN Nectar
SMM
SMB_C
-----
SMB_C
OCB HC3.1
Token ring
STS 1G
SMT2G
PCM / SDH
SMA
TS V5.2
SMB_XT
SMB_XT
E
T
U
SMB_A
N7
RCH
Page 76
NOTES
Page 76
Local OAM
Remote OAM
LAN IP
NECTAR
platform
Worker
STATION
Non control
STATIONS
NECTAR
GATEWAY
(SMB)
OCB
platform
LSN
GATEWAY
(SMB)
GATEWAY
(SMB)
OCB LAN
SM
SM
SM
Page 77
NOTES
Page 77
DS 10
X25, ISDN
Ethernet
Compaq
ROUTER
Basic
Eth 100/10
DS 10
RS232
Compaq
RS232 adapt
Eth 100/10
equip-
Basic
equip-
ment
ment
SMB
SCSI
SCSI
Shared disks
Page 78
NOTES
Page 78
UC
Disks
UC
UC
Disks
UC
HUB
HUB
Router
Page 79
NOTES
Page 79
Page 80
NOTES
Page 80
CDRA
LSN Nectar
SMM
SMB_C
-----
Billing
Collector
SMB_C
Token ring
STS 1G
SMT2G
SMA
TS V5.2
SMB_XT
SMB_XT
1024 PCM
E
T
U
RCH
SMB_A
N7
CSNL
Page 81
NOTES
Page 81
Question 2: SMB_XT
Draw the rack configuration of an SMB_XT for this exchange in an ABX2S subrack.
Page 82
NOTES
Page 82
STS 1G
SMT2G
SMA
TS V5.2
SMB_XT
SMB_XT
30 STM1/SDH
E
T
U
16 GLR total
SMB_A
N7
RCH
Page 83
NOTES
Page 83
3.3 TU management
3.4 Defence
Page 84
NOTES
Page 84
Functional impact
The software must be able to address the LR links
beyond the current limit of 2048 LR
Page 85
NOTES
Page 85
COM
LRX
3 bits
8 bits
8 COM
TS
5 bits
32 channels
256 LR
Page 86
NOTES
256 LR links addressable on eight different COM, or 2048 LR addressable.
The concept of switch (COM field) is no longer required in LR addressing because it is no longer
representative.
Page 86
Page 87
NOTES
Page 87
19 bits
LRX
TS
14 bits
5 bits
19 bits
GGLR
GLR
LR
8 bits
3 bits
3 bits
TS
5 bits
Page 88
NOTES
LRX on 14 bits, which provides addressing capability up to 16384 LR
In RCH internal addressing:
256 GGLR adressable, eight GLR in each, eight LR in each GLR, or 16384 LR.
Page 88
FUNCTIONAL IMPACTS
Page 89
NOTES
Example:
MLMR - MLMQ connection setup mesages
Change of MLCOM, MLURM and other software
Change of ZGX, OM and other archive files
Page 89
UR addressing
Current addressing does not have to change
16 bits
ALR
7 bits
UR
8 bits
256 UR
128 ALR
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 90
NOTES
128 LR addressable on 256 UR, or 32768 LR addressable.
Page 90
O&M changes
Station management: SMxx, ESMxx
TCA and ASE ETU management: ETUxx
LA control function: GLRCT
GLR interrogation: GLRIL
RCH observation management: OCPRO and OCAGE
Change of LRX and GLR parameters: LDxx, QMCxx, FSMxx, etc
Page 91
NOTES
Page 91
Page 92
NOTES
Page 92
ML GX
Connection control
Speech connection service
Overall recognition of RCH breakdown in SMBs
Recognition of SMB and ETU positioning
ML COM
Detection of faults and reporting to ML GX
Execution of connection controls
Tone connection service
OL TCA
Detection of faults and reporting to ML GX
Execution of connection controls
Tone connection service
ML COM
RCH observation processing
Old architecture
New architecture
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 93
NOTES
Page 93
SMB_XT
ML SM
ML COM
Branch A
ML SM
ML COM
I
C
L
/
I
S
L
SCHA1
TCA0
...
TCA2
TCA3
I
C
L
/
I
S
L
...
ASE0
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 94
NOTES
Page 94
Page 95
NOTES
The HC3.1 product supports the following performance levels:
480 000 CIC
3528 SLC
Page 95
N 7 on SMA
N 7 on SMB_A
ACHIL
ACMPR
Page 96
NOTES
A station can contain up to four ACMPR couplers, or a maximum of 252 channels per station.
14 stations maximum or a maximum of 3528 SLCs.
Page 96
Page 97
NOTES
Page 97
ACMPR
ACPWU
ACPWU
ML SM_P
ML PUPE_I
ML SM_A
ML PUPE_N
ML SM_A
SM_A
MLML
PUPE_L
ML PUPE_L
(ML AN_P)
(ML ETA_P)
(ML ETA_L)
(MLAN_L)
ETA_L)
(ML
(ML AN_L)
Station bus
Page 98
NOTES
In HC3.1, the MLAN and MLETA software machines are on SMA.
N 7 level 2 processing is implemented in the form of two entities:
ML PUPE_L, part of the XUTC archive
ML SM 721, part of the ZSM archive
Page 98
256 records
EOCS
Page 99
NOTES
The EOCS file in the UTC archive is extended to 256 records.
Page 99
The records in the EOCS file which stores signalling link observation results have been
changed to accommodate these two counters
Page 100
NOTES
Page 100
Page 101
NOTES
Page 101
SMT
AFCTE
RCH
AFLRX-E
SMB_A
AFLRX-S
Page 102
NOTES
Page 102
Change of O&M, N 7
Description of auxiliary coupler configuration: CFAMO
Signalling link set management: FSMxx
Signalling link interrogation: CSMIN
Observations: TCSxx and SCSxx
Page 103
NOTES
Page 103
Solution
SMB with a gateway functionality
Implementation of TCP/IP and UDP/IP in the SMBs
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 104
NOTES
TCP/IP will be used for protected dialogue in connected mode.
UDP/IP will be used for datagram mode dialogue.
Page 104
Page 105
NOTES
The IP packets will need to be able to be routed:
on output: to the MLSM component in charge of the access network at the external address
on input to the destination OCB application
Page 105
Page 106
NOTES
In terms of connection management, the software handles, among other things:
distribution of messages over the two Ethernet links
transparency with respect to TCP/IP which sees only one link
The Ethernet coupler provides an IP router function and OCB/Nectar LSN interface
Page 106
Functional: OR group AS
Page 107
NOTES
Page 107
Ethernet coupler
Server
ML
Service
TCP UDP
TCP UDP
IP
IP
COM_OCB
COM_OCB
MAC TR
MAC TR
IP
Ethernet
LAN TR
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Ethernet
LSN
Page 108
NOTES
Page 108
SMB4
SMB1
OCB-1 network
Multiplex
Mli
SMB5
OCB
SMB3
OCB-3 network
MLj
SMB2
OCB-2 network
External domain 2
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 109
NOTES
The OCB is divided into networks, each comprising a list of ML (AS).
For each pair [OCB network/external domain], election of a priority coupler function from the list of
coupler functions providing access to the external network.
There can be up to 16 OCB networks, described in the FCDOM site file.
Page 109
Page 110
NOTES
The ML OCBs know a service's:
Port number
External OR group AS
Maximum number of instances
OCB Server dialogue:
Selection of an instance of the external service
Choice of the router (Ethernet coupler). Chosen by the COM-OCB
Page 110
Token Ring
SMB_XT
ETU
ETU
simplex
ETU
simplex
simplex
SMBAi
SMB_XT
ETU
ETU
duplex
ETU
duplex
duplex
Pair of SMB
SMBDi
ETU
ETU
simplex
ETU
simplex
simplex
SMBBi
Page 111
NOTES
To specify a TU from the TCH we have to specify a SMBAi or SMBBi (i=1 to 32)
To specify a TU from the SDH links, we have to specify a SMBDi (Duplex SMB)
Station not involved with ETU : SMBi (i=1 to 88)
Page 111
MR performance
The MR macro is a critical point in terms of performance
Increase in MACRO_MR performance
Page 112
NOTES
Page 112
Page 113
NOTES
The ML HD is located on an SMBD (duplex SMB). An SMBD comprises two SMBe (individual SMBs).
Up to 32 SMBDs can coexist. There can therefore be up to 64 MLHD instances.
Each SMBe has an ICL/ISL link to the 63VC12 ETUs. Consequently, each MLHD can communicate
with all the duplex ETUs of its SMB.
Page 113
OM
Operator
(SMM)
Multiplex
ML SM-Ur
ML HD-r
ML SM-Up
ML HD-p
(SMM)
(SMM)
ICL/ISL bus
ICL/ISL bus
Pair of SMBs
supporting ETU
ETU
ETU
SDH
ETU
SDH
SDH
Page 114
NOTES
The MLSM-U is an MLSM component on the management side of the ETUs.
Page 114
Page 115
NOTES
Page 115
The standby MLHD audits the state of its peer to detect any
station crashes and switch to worker mode.
Page 116
NOTES
OM MLHD dialogue
The OM does not know the status (worker or standby) of the ML HDs. It sends its request to the ML
HD group.
Only the worker MLHD processes requests from the OM.
Page 116
Board
PCM1 termination
Physical
interface
SDH
termination
STM1 SDH
Physical
interface
Managed by MLHD
PCM63 termination
Managed by MLURM
Page 117
NOTES
The 63VC12 ETU counters are observed using the standard MLURM mechanism.
Page 117
Page 118
NOTES
Page 118
TP
...
SDH line
PCM 63
Protection
group
Protected
SDH line
SDH 0
interface
PCM 1
Protecting
SDH line
SDH 1
interface
...
TP
PCM 63
Page 119
NOTES
Page 119
Page 120
NOTES
On a conventional OCB, when addressing a PCM link, AMET = SMT N - Board N - PCM N
Here, the need is for: AM = SMB N, ET=RGTU - RGET
There are two ETs on the ETU (two SDH lines on the 63VC12 board) only in the case of an optical
line. The electrical profile (the default profile) does not support creation of a protection group.
Page 120
Administrative status:
ES (in service)
BLOM (isolated by the operator)
Operational status:
ES (in service)
HS (out of service)
Page 121
NOTES
It is also possible to have NEQ (not equipped) as the administrative state. However, this state is not
directly requested by the operator.
Page 121
Additional functions
Page 122
NOTES
Page 122
Path address:
Address of the SMB on which the associated ETU is
located
Number of the ETU and number of the ET
associated with the path
Operational state:
ES (in service)
HS (out of service)
Page 123
NOTES
There is no administrative state for a path. The operator cannot force its state.
Page 123
Page 124
NOTES
APS: Automatic Protection Switching
Page 124
B
A
APS
APS
B
Transmission
equipment
OCB HC
A: SDH line
B : active line
C : passive line
Page 125
NOTES
Page 125
Maintenance:
B has failed.
Switchover to C
B
A
C
APS
APS
ONE-WAY
B
Transmission
equipment
B is OK.
No switchover to C
OCB HC
Page 126
NOTES
Page 126
Normal operation:
B
A
C
APS
APS
C
B
OCB HC
Transmission
equipment
B is repaired.
Remain on C
Non reversible
Page 127
NOTES
Page 127
Page 128
NOTES
Page 128
Page 129
NOTES
In the case of an alarm on an SDH path, 63 PCM alarms will not be output (for the 63 PCM links
associated with the SDH line). Only the SDH alarm is output.
Page 129
Page 130
NOTES
The 16-PCM UR to 128-PCM UR migration function means that the objects supported by the PCM
links do not have to be deleted. There is no need to delete before re-creating.
Page 130
Page 131
NOTES
Page 131
RCH 16 384 LR
LA
or
LAH
ATM MATRIX
MATRIX
INTERFACE
SAB
LR
or
LRH
8 bits/channel 16 bits/channel
Supp. bit
processing
MATRIX
INTERFACE
AEI
SAB
LR
or
LRH
16 bits/channel
LA
or
LAH
8 bits/channel
Supp. bit
processing
Page 132
NOTES
In reception, the SAB function selects the samples (TS by TS) based on:
the parity bit transported
information computed by system defence
Page 132
Page 133
NOTES
Page 133
Page 134
NOTES
Collision detection
When a connection is set up, the system checks that the connection does not already exist.
If it does, priority is given to the most recent connection request.
Page 134
LA control
Local def.
Local def.
GLR defence
LRS
IGID2
SABs
RGTRI
RGCAT
BGQRP
AEI
BGAT6
TCAs
BGAT6
BGHMP
BGQRP
AEI
BGAT6
ASE
BGAT6
BGQRP
LRE
RGTRI
IGID2
LAE
RGTCA
TCAe
SABe
LAS
Local def.
LA control
Ports and AEI
MC1, MC2
Payload CRC, AAL
Page 135
NOTES
MC1,MC2: Maintenance cells
Page 135
Hypervisor, supervisor
Defence systems
Station defence
Ring defence
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 136
NOTES
Page 136
Detection
Detection proper
External supervision
Positioning
Reconfiguration
Reassignment of all of its tasks to a backup station if one exists
Page 137
NOTES
Page 137
OM
SM defence
Station management
Ring management
Self-detection
Self-defended means
MLPC
N7 management
MLGX
Connection
management
of communication
Page 138
NOTES
Reconfigurations are controlled by:
central defence
the MLPC for MLPUPEs
the MLGX for the MLCOM
Page 138
Loadsharing
ETA, AN, MQ, TR, TX, MR, GX, CC, GS
Worker/standby
URM, HD, PC, OC
Duplicated
COM, GT function ETA
N+1
ML PUPE
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 139
NOTES
Page 139
Page 140
NOTES
Page 140
Central defence:
reduced switchover time
quicker return to operation
Local defence:
recognition of new fault detectors
new supervision mechanism
Page 141
NOTES
To reduce switchover times, the backup station is preloaded.
Following a software fault, operation is restored by a station reboot with no locavar or reload.
Page 141
SMB2
SMB3
ML SM
ML SM
ML SM
MLPUPE1
MLPUPE2
MLPUPE3
Starting
MLMR1
MLMR2
MLMR
situation
ML SM
ML SM
MLPUPE2
MLPUPE3
MLMR2
MLMR1
After SMB1
failure
ML SM
ML SM
ML SM
After SMB1
MLPUPE1
MLPUPE2
MLPUPE3
repair
MLMR
MLMR2
MLMR1
Page 142
NOTES
Page 142
Gateway failures
OCB communication level failures
SM failures
Alcatel University - 8AS 90001 1896 VT ZZA ED.03 - November 2001
Page 143
NOTES
OCB communication level failures are the responsibility of basic defence. No impact on the "server
vision".
Page 143
Page 144
NOTES
Page 144
common servers
assign an external AS
This means that independence between OCB and the
external world can be controlled as required
Page 145
NOTES
Page 145
Internal
resources
Ethernet media
External AS
Server-related defence
Page 146
NOTES
Page 146
Page 147
NOTES
Page 147
ALARM appli
SM central defence
OALRM
MLOC
OEASX
Centralized defence
Ethernet
External AS
broadcast
MLSM_p
OALRM
OSETE
SMB
MLSM_eth
State publication
Page 148
NOTES
Page 148
Functional architecture
N 7 signal processing on SMB
SDH TU management
Defence
Page 149
NOTES
Page 149
Question 1
Given a non-HC OCB.
Given a list of its SMs and MLs (see ESMIN), draw the architecture of this
exchange starting from the information in the next slide.
Page 150
NOTES
@ESMIN;
CEN=1/99-10-06/18 H 16 MN 48/INTERROGATION D'ETAT DE SM
TRAITEMENT TDRHM0 ACC
AM = SMMA
AF = OCA
AM = SMMB
AF = OCB
AM = SMC1
AF = MR4
AF = CC4
ETAT=ES
AF = GS4
ETAT=ES
AF = TX2
ETAT=ES
AM = SMC2
AF = MR3
AF = CC3
ETAT=ES
AF = GS3
ETAT=ES
AF = TX1
ETAT=ES
AM = SMC3
AF = TR2
AF = MQ2
ETAT=ES
AF = GX2
ETAT=ES
AF = PCB
ETAT=ES
AF = MR2
ETAT=ES
AF = CC2
ETAT=ES
AF = GS2
ETAT=ES
AM = SMC4
Page 150
PCM
MAS
MIS
Page 151
NOTES
AM = SMC5
AF = TR1
AF = MQ1
ETAT=ES
AF = GX1
ETAT=ES
AF = PCA
ETAT=ESRE
AF = MR1
ETAT=ES
AF = CC1
ETAT=ES
AF = GS1
ETAT=ES
AM = SMXA1
AF = COMA1 ETAT=ES
AM = SMXB1
AF = COMB1 ETAT=ES
AM = SMA1
AF = PUPE1 ETAT=ESRE
AF = ETA1
AM = SMA2
ETAT=ES
ETAT=ES AUTS=NON AGEO=S1-TR02-B03-A109-R014
AF = PUPE2 ETAT=ES
AF = ETA2
AM = SMA3
ETAT=ES
ETAT=ES AUTS=NON AGEO=S1-TR02-B03-A147-R014
AF = PUPE3 ETAT=ES
AM = SMTA1
AF = URMA1 ETAT=ESRE
AM = SMTB1
AF = URMB1 ETAT=ES
TRAITEMENT TDRHM0 EXC
Page 151
DHA
CDRA
LSN Nectar
SMM
SMB1
------
SMB4
Token ring
SMT2G
PCM / SDH
SMBA 1
SMB_XT
SMBB 1
E
T
U
SMA
SMB6
SMB5
RCH
Page 152
NOTES
Page 152
Page 153
NOTES
Page 153
Page 154
NOTES
@ LDCR:
CEN=1/91-10-22/09 H 50 MN 35/CREATION DE LIAISON DE DONNEES
@ AFCTE=48-1-10,SRV=T1,ILS=L008,TYLD=1;
SRV = T1 , ILS = L008 , NLD = 0002
TYLD = 01 , FSLD = 002 , RCONF = 0 , SURV = 0
AFCTE = 048-1-10
@ FSMCR :
CEN=1/96-06-06/09 H 01 MN 00/CREATION D'UN FAISCEAU DE CANAUX SEMAPHORES
@ NFSM=FSM30,COC=4,RANC=3,SRV=T1,ILS=L008,TSV=2,PS=614,LOI=10;
TRAITEMENT TFSMCR ACC
NFSM=FSM30 TYR=RN
PS= 00614 LOI= 010
D= N CORR= BASE
03
008 T1
L008 002-02
003-04
2-080-01
NCNT+BLOM
Page 154
On the following OCB HC3.1 exchange, SMB1 and SMB2 are active SMB_Cs and
SMB3 is a standby SMB_C.
SMB1 crashes.
List the successive states of the SMBs and the MLs while SMB1 is being reconfigured
(starting from the information given in the next slide).
Page 155
NOTES
@ESMIN;
CEN=1/00-09-04/15 H 03 MN 50/INTERROGATION D'ETAT DE SM
TRAITEMENT TDRHM0 ACC
AM=SMMA
AF=OCA
( . )
AM=SMB1
AF=TR1
AF=MQ1
AF=GX1
AF=PCA
AF=MR1
AF=CC1
AF=GS1
AF=TX1
AM=SMB2
AF=TR2
AF=MQ2
AF=GX2
AF=PCB
AF=MR2
AF=CC2
AF=GS2
AF=TX2
AM=SMB3
AM=SMB4
AF=PUPE1
AM=SMB5
AF=PUPE2
AM=SMB6
ETAT=ES AUTS=NON AGEO=S1-TR01-B07-A115-R083
AF=PUPE3 ETAT=ES
TRAITEMENT TDRHM0 EXC
Page 155
AM=SMB3
Phase 1
AM=SMB1
AF=TR1
ETAT=BLOS
ETAT=
...
Page 156
NOTES
Page 156
VC12 processing
APS
STM1 termination
RAB bus
Question 4
How can you be sure that this is an optical SDH connection?
Modify the diagram to show connection of an electrical SDH.
Page 157
NOTES
Page 157
Page 158
NOTES
Page 158
Page 159
NOTES
The command can be executed without parameters.
@SMIL;
CEN=1/01-04-26/16 H 31 MN 47/SM LISTING
PROCESS TXTGES ACC
...
AM = SMB1
STBA=1-2-2-66
RAIN=2
RGBAC=0
NMCA=AE35B
SFCA=CV48
RGSF=0
* RAIN=9
NMCA=ACPWUB
SFCA=PUP
RGSF=0
* RAIN=21
NMCA=ACPWUB
SFCA=PUS
RGSF=0
* RAIN=27
NMCA=ACPWUB
SFCA=PUS
RGSF=1
* RAIN=33
NMCA=ACPWUB
SFCA=CMPA
RGSF=0
* RAIN=39
NMCA=ACPWUB
SFCA=PUS
RGSF=2
* RAIN=39
NMCA=AAETH
SFCA=ETH
RGSF=0
* RAIN=45
NMCA=AATRA
SFCA=TR
RGSF=1
* RAIN=51
NMCA=AATRA
SFCA=TR
RGSF=2
* RAIN=57
NMCA=AATRA
SFCA=TR
RGSF=3
RAIN=63
NMCA=AATAD2
SFCA=TAD
RGSF=0
RAIN=76
NMCA=AA35B2
SFCA=AB48
RGSF=1
RAIN=2
NMCA=AFS10
SFCA=FDP
RGSF=0
SFCA=UV
RGSF=1
...
STBA=1-2-2-29
* RAIN=2
RGBAC=0
NMCA=ZKUVB
...
Page 159
Page 160
NOTES
Note:
You can still interrogate the system with AFGRT, AFGRX, AFGRA, etc.
Page 160
@ETUCR:
CEN=1/98-10-05/10 H 35 MN 46 /CREATION D 'UNITE DE TERMINAISON
@AM=SMBD1, SFET=TCA, ;
TRAITEMENT TXTGES ACC
Page 161
NOTES
All operator commands with the AM parameter are affected.
In the various operator commands, a duplex SMB station is designated as follows:
- AM=SMBAi or SMBBi (i=1 to 32) for a station supporting simplex + duplex ETUs
- AM= SMBDi for a station supporting duplex ETUs
Page 161
Page 162
NOTES
@HMXMO:
CEN=1/00-03-30/12 H 18 MN 16/MODIFICATION DES RACC. HUBS - TR
@AM=SMB1,AMX=MASA2,AMH=SMB1,RAINH=59;
TRAITEMENT TXTGES ACC
TRAITEMENT TXTGES EXC
@HMXMO:
CEN=1/00-03-30/12 H 18 MN 42/MODIFICATION DES RACC. HUBS - TR
@AM=SMB2,AMX=MASA2,AMH=SMB1,RAINH=59:
TRAITEMENT TXTGES ACC
TRAITEMENT TXTGES EXC
@HMXMO:
CEN=1/00-03-30/12 H 38 MN 29/MODIFICATION DES RACC. HUBS - TR
@AM=SMB1,AMX=/MASA2:
TRAITEMENT TXTGES ACC
TRAITEMENT TXTGES EXC
Page 162
@TAELA:
CEN=1/98-10-05/10 H 35 MN 46 /LANCEMENT TESTS D'ANNULEURS D'ECHO
@AFCT=85-27-12,T=3-05,AECHO=ECHOL2+DIR1,..;
TRAITEMENT TOTTAE ACC
Page 163
NOTES
Page 163
Page 164
NOTES
Addition or modification of characteristics of the SMB3's gateway function for coupler board 0.
@RESMO:
CEN=1/00-02-22/14 H 35 MN 41/MODIFICATION DE SMB PASSERELLE
@AM=SMB3,NCPL=0,AIPPC=180-112-225-1,AIPSC=190-213-85-10,AIPBC=129-01-00-02,
MODF=1-1;
TRAITEMENT TXTGES ACC
TRAITEMENT TXTGES EXC
Page 164
Page 165
NOTES
Reminder: Result output is obtained when observation is stopped (SCSAR).
NBE : number of blocks of 128 signal units sent for the first time on line
NBR : number of blocks of 128 signal units received for the first time on line
NFSM : name of signalling link set observed
NRF1 : number of forced retransmission cycles after reaching threshold N1
NRF2 : number of forced retransmission cycles after reaching threshold N2
NTC : number of message signal units received with an incorrect CRT (CRC?)
NTPE : number of message signal units (MSU) lost following transmit congestion
NTI : number of garbled frames
NTPR : number of message signal units lost through buffer file congestion
Page 165
Page 166
NOTES
The operator commands affected by these changes are: MICxx, QMCxx, EQTxx, TELxx
Page 166
Page 167
NOTES
@LINCR:
CEN=1/00-05-22/10 H 55 MN 47/CREATION DE LIGNE
@AM=SMBD1,ET=1-1,PRF=TO1S,ALS=OUI,TIMQ=G812T,SD=DIXM7;
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01 PRF=TO1S ALS=OUI TIMQ=G812T SD=DIXM7 ADMS=BLOM
TRAITEMENT THDLPG EXC
Page 167
Page 168
NOTES
@LINMO:
CEN=1/00-05-22/10 H 55 MN 47/MODIFICATION DE LIGNE
@AM=SMBD1,ET=1-1,ALS=OUI,TIMQ=G812T;
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01 PRF=TE155 ALS=OUI TIMQ=G812T SD=DIXM6
ADMS=BLOM
TRAITEMENT THDLPG EXC
Page 168
Page 169
NOTES
@LININ:
CEN=1/00-05-22/10 H 55 MN 47/INTERROGATION DE LIGNE
@AM=SMBD1,ET=1-1<2-2;
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01 PRF=TE155 ALS=NON TIMQ=G812L SD=DIXM6
ADMS=BLOM
OPES=ES
AM = SMBD01 ET = 002-01 PRF=TO1S ALS=OUI TIMQ=G812L SD=DIXM6 ADMS=ES
OPES=ES
AM = SMBD01 ET = 002-02 PRF=TO1S ALS=OUI TIMQ=G812L SD=DIXM6 ADMS=ES
OPES=ES
TRAITEMENT THDLPG EXC
@LINSU:
CEN=1/00-05-22/10 H 55 MN 47/SUPPRESSION DE LIGNE
@AM=SMBD1,ET=1-1;
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01 PRF=TE155 ALS=NON TIMQ=G812L SD=DIXM6
ADMS=BLOM
TRAITEMENT THDLPG EXC
Page 169
Page 170
NOTES
@LINTL:
CEN=1/00-02-10/18 H 15 MN 20/TEST DE LIGNE
@AM=SMBD1,ET=126-1;
TRAITEMENT THDLPG ACC
AM = SMBD01
ET = 126-01
TEST = OK
TRAITEMENT THDLPG EXC
Page 170
Page 171
NOTES
There are also PTEH and PTSH parameters respectively corresponding to PTE and PTS, but in
hexadecimal
@TPACR:
CEN=1/00-02-21/15 H 47 MN 53/PATH CREATION
@AM=SMBD1,ET=1-1,PTE='PARIS',PTSH='4C616E6E696F6E3031202020202020'H:
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01
PTE = 'PARIS
' PTEH = '504152495320202020202020202020'H
PTS = 'L******01
' PTSH = '4C616E6E696F6E3031202020202020'H
PTI = NON
TRAITEMENT THDLPG EXC
Page 171
Page 172
NOTES
@TPAMO:
CEN=1/00-02-21/15 H 47 MN 53/CREATION DE CONDUIT
@AM=SMBD1,ET=1-1,PTE='PARIS1',PTSH=/'4C616E6E696F6E3031202020202020'H:
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01
PTE = 'PARIS1
' PTEH = '504152495331202020202020202020'H
PTS =
PTSH = ''H
PTI = NON
TRAITEMENT THDLPG EXC
Page 172
Page 173
NOTES
@TPAIN:
CEN=1/00-02-21/15 H 59 MN 53/INTERROGATION D'UN CONDUIT
@AM=SMBD1,ET=3-1:
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 003-01 PTI = NON OPES = ES
PTE = 'LYON
' PTEH = '4C594F4E2020202020202020202020'H
PTS = 'L******02
' PTSH = '4C616E6E696F6E3032202020202020'H
TRAITEMENT THDLPG EXC
@TPASU:
CEN=1/00-02-21/15 H 55 MN 47/SUPPRESSION DE CONDUIT
@AM=SMBD1,ET=1-1:
TRAITEMENT THDLPG ACC
AM = SMBD01 ET = 001-01
PTE = 'PARIS
' PTEH = '504152495320202020202020202020'H
PTS = 'L******01
' PTSH = '4C616E6E696F6E3031202020202020'H
PTI = NON
TRAITEMENT THDLPG EXC
Page 173
Page 174
NOTES
@PGRCR:
CEN=1/00-02-10/18 H 15 /CREATION DE GROUPE DE PROTECTION
@AM=SMBD1,NPGR=1-2,TYPP=UNID,PTED=1,PING=2;
TRAITEMENT THDLPG ACC
AM = SMBD1
NPGR = 001-02
TYPP = UNID
PTED = 01
PING = 02
TRAITEMENT THDLPG EXC
Page 174
Page 175
NOTES
@PGRIN,CEN=1:
CEN=1/00-02-10/18 H 15 /INTERROGATION GROUPE DE PROTECTION
@AM=SMBD1,NPGR=1-2;
TRAITEMENT THDLPG ACC
AM=SMBD01
PTEDS=OK
NPGR=001-02
PINGS=SD
TYPP=UNID
SST=SWC
PTED=01
PING=02
REQ=CL
SDIR=SWTPG
Page 175
Page 176
NOTES
@PGRSU,CEN=1:
CEN=1/00-02-10/18 H 15 /SUPPRESSION DE GROUPE DE PROTECTION
@AM=SMBD1,NPGR=1-2;
TRAITEMENT THDLPG ACC
AM=SMBD01 NPGR=001-02 TYPP=UNID PTED=01 PING=02
TRAITEMENT THDLPG EXC
Page 176
Page 177
NOTES
@ APSMO,CEN=1:
CEN=1/00-02-11/14 H 35 /CONFIGURATION APS
@ AM=SMBD1,NPGR=1-2,PTED=1,REQ=CL;
TRAITEMENT THDLPG ACC
AM = SMBD1
NPGR = 001-02
PTED = 001
REQ = CL
Page 177
Page 178
NOTES
Page 178
Page 179
Page 179
HC
HLR
HTVC
ICL
IN
ISL
IT
IWU
LAB
High Capacity
Home Location Register
High voltage DC voltage
Internal Communication Link
Intelligent Network
Internal Serial Link
Information Technology
InterWorking Unit
Local Access Bus
Page 180
Page 180
Page 181
Page 181
Network Termination
Operation Administration Maintenance
Operation and Maintenance Application Part
Plesiochronous Digital Hierarchy
Public Land Mobile Network
Point of Presence
Plain Old Telephone Service
Public Switched Telecom Network
Permanent Virtual Connection
High rate switching network
Switching network
Catalogue of system data
Alcatel telecommunication management network
Public Switched Telephone Network
Branch selection and amplification (function)
Modular power station
Page 182
Page 182
Page 183
Page 183
Page 184
Page 184