Parker Uk pgp500 PDF
Parker Uk pgp500 PDF
Catalog HY09-0500/US
General Information
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Consistent quality
Technical innovation
Premier customer service
Worldwide Sales
and Service
Material Handling
Construction
Turf Care
Forestry
Agriculture
Industrial
! WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users
having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due
to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of
the products and systems and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and
its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed
by the provisions stated in the Offer of Sale.
Copyright 2008, Parker Hannifin Corporation, All Rights Reserved.
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Table of Contents
Table of Contents
Aluminum 500 Series:
Description and Characteristics ......................................................... 4
PGP/PGM 511
Ordering Code..................................................................................10-11
Specification Standard Displacements............................................... 12
Dimensions Single Unit with Side Ports............................................ 12
Dimensions Single Unit with Rear Ports............................................ 12
Dimensions Tandem Unit..................................................................... 12
Shaft End Cover Options...................................................................... 13
Port Options........................................................................................... 14
Drive Shaft Options..........................................................................15-16
Performance Curves............................................................................. 17
PGP/PGM 505
Ordering Code......................................................................................... 5
Specification Standard Displacements................................................. 6
Dimensions Single Unit with Side Ports.............................................. 6
Dimensions Single Unit with Rear Ports.............................................. 6
Dimensions Tandem Unit....................................................................... 6
Shaft End Cover Options........................................................................ 7
Port Options............................................................................................. 7
Drive Shaft Options................................................................................. 8
Performance Curves............................................................................... 9
Pump/Motor Products
PGP/PGM 505
PGP/PGM 511
Flows to 8 gpm
Flows to 19 gpm
Continuous pressures
to 4000 psi
Continuous pressures
to 3625 psi
Wide variety of
integral valve options
Wide variety of
integral valve options
Catalog HY09-0500/US
Descriptions/Characteristics PGP/PGM500
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
PGP 500
Advantages
High efficiency
Pressure balanced bearing blocks assure maximum
efficiency under all operating conditions.
Application flexibility
International mounts and connections, integrated
valve capabilities and common inlet multiple pump
configurations provide unmatched design and
application versatility.
Description
Product Features
Description
Pump Type
Mounting
Ports
Shaft Style
Fluid Viscosity
Speed
Range of Ambient
Temperature
Filtration
Theoretical Displ.
Flow Velocity
Drive
Inlet Pressure
Outlet Pressure
Fluids
Fluid Temperature
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Gear
Design
PG
505
10
Rear
Side
Side
Rear
Suction Pressure Suction Pressure
1
1
Port
Port
Port
Port
11 12
13
505
14
15 16
17
18
19
8,9,10,11,18,19,20,21
Port Options
1 Pump/Motor
5 Shaft
Pump
Motor
B1 No ports
2,15 Unit
Pump
Motor
Single unit
Standard Motor
w/o checks
B Multiple unit
Standard Motor
w/ two checks
A1 50.8x50.8 - 45.25
4bolt square flange
Standard Motor
w/one anti cavitation
check (ACC)
X
N
V
13 Drain Position2
3,16 Displacement
0020
0030
0040
0050
0060
0070
0080
0100
0110
0120
4 Rotation
C
A
B
Clockwise
Counter clockwise
Bi-directional motors only
20 21
B1 No drain
A 7/16"-20 UNF thread
No seal
NBR
FPM, FKM
Drain on bottom
Drain on top
Rear drain
14 Section Connection
S
Separate inlets
C Common inlets
NOTES:
1 Only coded for the last section.
2 Only for motors
3
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Specifications/Dimensions PGP/PGM505
PGP/PGM 505 Specifications
Description
Code
0020
0030
0040
0050
0060
0070
0080
0090
0100
0110
0120
Displacements
cm /rev
in3/rev
2
0.12
3
0.18
4
0.24
5
0.31
6
0.37
7
0.43
8
0.49
9
0.55
10
0.61
11
0.67
12
0.73
Continuous Pressure
bar
psi
275
3988
275
3988
275
3988
275
3988
275
3988
275
3988
275
3988
250
3625
250
3625
250
3625
220
3190
Intermittent Pressure
bar
psi
300
4350
300
4350
300
4350
300
4350
300
4350
300
4350
300
4350
275
3988
275
3988
275
3988
220
3190
Minimum Speed @
Max. Outlet Pressure
rpm
500
500
500
500
500
500
500
500
500
500
500
rpm
4000
4000
4000
4000
3600
3300
3000
2900
2800
2400
2400
kW
HP
2
2.68
2.3
3.08
3
4.02
3.8
5.10
4.5
6.03
5.3
7.11
6
8.05
6.5
8.72
6.9
9.25
7.6
10.19
8.4
11.26
Dimension "L"
mm
in
38.4
1.51
41.1
1.62
43.8
1.72
46.5
1.83
49.1
1.93
51.8
2.04
54.5
2.15
57
2.24
59.8
2.35
62.5
2.46
65.2
2.57
Approximate Weight 1)
kg
LB
1.72
3.80
2.22
4.91
2.27
5.02
2.32
5.13
2.38
5.26
2.43
5.37
2.48
5.48
2.53
5.59
2.58
5.70
2.63
5.81
2.68
5.92
1)
Single pump with Shaft End Cover D3 and non ported Port End Cover.
82
3.23
15.1
(.59)
L
L/2
L
L/2
27
(1.06)
15.1
(.59)
NOTE:
Dimension "F" see shaft end covers on page 7
Dimension "L" see table above
19
(.75)
82
(3.23)
82
(3.23)
17
.67
L/2
13.1
(.52)
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Code H1
101.6 (4.00)
31.8
(1.25)
82.6 (3.25)
85.9
(3.38)
71.6 (2.82)
25.4
.
(1.00)
89.9
(3.54)
13.1
(.52)
9.5
(.37)
50.8 (2.00)
50.8 (2.00)
9.8
(.39)
13.1
(0.52).
7.3
(.29)
41.3 (1.63)
45 25
. -0.04 (1.78)
3.2
(.13)
6.1
(0.24)
10.3
(0.41)
71.6 (2.82)
8.7
(0.34)
43.8
(1.72)
15.2
(0.60)
Code H2
Notes: 1. Dimensions are in millimeters (inches).
2. Dimensions are nominal except where noted.
3. Subscript and/or superscript numbers are tolerances.
130.2 (5.13)
106.4 (4.19)
9.8
(0.39)
101.8
(4.01)
11.
(0.43)
13.1
(0.52)
7.7
(0.30)
6.1
(0.24)
15.2
(0.60)
G1
T1
PGP/PGM 505
Code
G1
T1
Thread
Thread
Dimensions
9/16"-18 UNF
3/4"-16 UNF
7/8"-14 UNF
1 1/16"-12 UN
12.7
14.3
16.7
19.0
D2
D3
D4
D5
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
PGP/PGM505 Drive/Shaft/Drain
PGP/PGM 505 Drive Shaft
Code A1
Code A2
32.2
(1.27)
27.8
(1.09)
16
(0.63)
16
(0.63)
Spline SAE A
9T - 16/32 pitch
Flat root side fit
26.9
(1.06)
32
(1.26)
Code J1
Code K1
35.5
(1.40)
19
(0.75)
32.2
(1.27)
3.2
(0.13)
-0.03
-0.26
17.73
(0.70)
15.88
(0.63)
4
(0.16)
12.7
(0.50)
-0.26
14.2
(0.56)
16
(0.63)
-0.03
3.2
(0.13)
3.2
(0.13)
19
(0.75)
Square key
4 x 4 x 19
(0.16 x 0.16 x 0.75)
16
(0.63)
Square key
3.2 x 3.2 x 19
(0.13 x 0.13 x 0.75)
31.8
(1.25)
38.1
(1.50)
Description
9T, 16/32 Pitch, SAE A
Style
Spline
Torque Rating
108Nm/954 in-lb
A2
Spline
108Nm/954 in-lb
J1
Parallel
43Nm/380in-lb
K1
Parallel
85Nm/751in-lb
Spline
36Nm/318in-lb
Torque [in-lb] =
Torque [Nm] =
Catalog HY09-0500/US
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Fluid Temperature = 45 2C
Viscosity = 36mm2/s
Flow [l/min]
Fluid Temperature = 45 2C
Viscosity = 36mm2/s
32
30
Flow n=2800 rev/min
28
13
26
12
24
11
22
10
20
9.0
18
8.0
16
7.0
14
6.0
12
5.0
10
4.0
8.0
3.0
6.0
2.0
4.0
1.0
2.0
50
100
150
200
250
300
Pressure [bar]
Performance data shown is based upon a series of laboratory tests and is not representative of any one unit.
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Gear
Design
PG
511
10
1 Pump/Motor
4 Rotation
P
M
C
A
B
Pump
Motor
Rear
Side
Side
Rear
Suction Pressure Suction Pressure
1
1
Port
Port
Port
Port
11 12
13
511
14
Clockwise
Counter clockwise
Bi-directional motors only
2,15 Unit
5 Shaft
Pump
Motor
Single unit
Standard Motor
w/o checks
B Multiple unit
Standard Motor
w/ two checks
Standard Motor
w/one anti cavitation
check (ACC)
15 16
17
18
19
20 21
8,9,10,11,18,19,20,21
Port Options
B1
D2
D3
D4
D5
D61
D72
D82
No ports
9/16" - 18 UNF thread
3/4" - 16 UNF thread
7/8" - 14 UNF thread
1 1/16" - 12UN thread
1 5/16" - 12 UN thread
1 5/8" - 12 UN thread
1 7/8" - 12 UN thread
13 Drain Position2
Drain on bottom
Drain on top
Rear drain
D4 72.0x100.0 - 80 rectangular
14 Section Connection
Separate inlets
C Common inlets
NOTES:
1 Only coded for the last section.
2 Only for motors
No seal
NBR
FPM, FKM
Double NBR
Double FPM
10
Catalog HY09-0500/US
PGP/PGM511 Specifications/Dimensions
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Code 0060 0070 0080 0100 0110 0140 0160 0180 0190 0210 0230 0270 0280
Displacements
cm3/rev
in3/rev
6
0.37
7
0.43
8
10
0.49 0.61
11
0.67
14
0.85
16
0.98
18
1.10
19
21
1.16 1.28
23
1.40
27
28
1.65 1.71
0310
31
1.89
250 250 250 250 250 250 250 250 250 235 225 190 185
3625 3625 3625 3625 3625 3625 3625 3625 3625 3410 3265 2755 2685
165
2395
275 275 275 275 275 275 275 260 260 240 235 200 190
3988 3988 3988 3988 3988 3988 3988 3770 3770 3480 3408 2900 2755
170
2465
Minimum Speed @
Max. Outlet Pressure rpm
500
500
Maximum Speed @
0 Inlet & Max. Outlet
Pressure
4000 4000 4000 3600 3600 3300 3000 3000 3000 2800 2800 2400 2300
2300
4.5
6.03
5.25
7.04
6
7.5
8.3
8.05 10.06 11.1
10.5
14.0
12
16.0
13.5
18.1
14.3 14.4
19.1 19.3
14.7
19.7
14.9 15.8
19.9 21.1
16.7
22.4
Dimension "L"
51.8
2.04
53.3
2.10
54.9 57.9
2.16 2.28
59.4
2.34
64
2.52
67
2.64
70.1
2.76
71.6 76.6
2.82 3.02
77.6
3.06
83.7 84.2
3.30 3.31
89.8
3.54
3.5
7.70
3.5
7.70
3.6 3.6
7.90 7.90
3.7
8.10
3.8
8.40
3.9
8.60
4.0
8.80
4.0 4.1
8.80 9.00
4.2
9.20
4.3 4.4
9.50 9.70
4.5
9.9
rpm
mm
in
Approximate Weight 1) kg
LB
1)
500
500
500
500
500
500
500
500
500
500
500
500
Single pump with Shaft End Cover Q1 and non ported Port End Cover.
L/2
15.8
(0.62)
102 m ax.
(4.02)
21
(0.83)
19.2
(0.76)
L
L
5.8
(0.22)
L
L
L/2
21
(0.83)
82 (3.23)
L/2
30
(1.18)
19.2
(0.76)
NOTE:
Dimension "F" see shaft end covers on page 15
Dimension "L" see table above
11
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Code D4
91 (3.58) max.
18.7
(0.74)
100
(3.94)
18.7
(0.74)
Code Q2
9.0
(0.35)
Code Q4
86 (3.39) max.
86 (3.39) max.
60
(2.36)
14.2
(0.56)
15.8
(0.62)
35
(1.38)
3
8
52
60
(2.36)
15.8
(0.62)
14.2
(0.56)
35..1
(1.38)
3
35
(1.38)
3
8
18
(0.71)
10.7
(0.42)
15.9
(0.63)
10.7
(0.42)
18
(0.71)
60 (2.36)
7.2
(0.28)
35..1
(1.38)
O- ring
45 x 2.5
(1.77 x 0.01)
60
(2.36)
7.2
(0.28)
52
5
34.5
(1.36)
15. 8
(0.62)
80 -0.06
(3.15) -0.11
14.3
(0.56)
72
(2.83)
12.7
(0.50)
43. 5
(1.71)
7.2
(0.28)
60. 3
(2.37)
12.7
(0.50)
15..8
(0.62)
101.6
. (4.00) - 0.0
0 5
9.4
(0.37)
15.9
(0.63)
Code H2
Notes: 1. Dimensions are in millimeters (inches).
2. Dimensions are nominal except where noted.
3. Subscript and/or superscript numbers are tolerances.
47.6
(1.87)
114 (4.49) m ax.
106.4 (4.19)
11.2
(0.44)
12.7
(0.50)
15.8
(0.62)
8 2.55 (3.25)-0.05
6.0
(0.24)
18.7
(0.74)
12
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
PGP/PGM511 Porting
PGP/PGM 511 Porting
Code
Code D
SAE straight thread
See table at right for specific port dimensions.
D2
D3
D4
D5
D6
D7
D8
G1
Thread
T1
Dimensions
9/16"-18 UNF
3/4"-16 UNF
7/8"-14 UNF
1 1/16"-12 UN
1 5/16"-12 UN
1 5/8"-12 UN
1 7/8"-12 UN
12.7
14.3
16.7
19.0
19.0
19.0
19.0
Description
Style
Torque Rating
A1
Spline
86Nm/759in-lb
C1
Spline
184Nm/1625in-lb
C2
Spline
184Nm/1625in-lb
K1
Parallel
K4
Parallel
75Nm/662in-lb
L1
Parallel
112Nm/989in-lb
L6
Parallel
145Nm/1280in-lb
Spline
110Nm/971in-lb
Torque [in-lb] =
Torque [Nm] =
75Nm/662in-lb
13
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Code C1
Spline SAE A
9T - 16/32 Pitch
Flat root side fit
15
(0.59)
19
(0.75)
11.9
(0.47)
17.5
(0.69)
7.6
(0.30)
7.6
(0.30)
24.3
(0.96)
30.1
(1.19)
38.2
(1.50)
32
(1.26)
Code K1
Code C2
Spline SAE 19-4
11T-16/32 Pitch
Flat root side fit
31.3
(1.23)
3.2
(0.13)
7.6
(0.30)
17.73
(0.70) -0.26
15.88
(0.63) -0.03
4
(0.16)
20
(0.79)
19
(0.75)
19
(0.75)
15
(0.60)
Square key
4 x 4 x 19
(0.16 x 0.16 x 0.75)
24.3
(0.96)
31.8
(1.25)
32.2
(1.27)
Code K4
Code L1
Square key
4.8 x 4.8 x 22.2
(0.19 x 0.19 x 0.87)
50.7
(2.00)
Square key
4 x 4 x 19
(0.16 x 0.16 x 0.75)
19
(0.75)
24.4
(0.96)
12.2
(0.48)
Spring washer
Nut
22.2
(0.87)
7/16-20UNF
44.7
(1.76)
17.46 (0.69)-0.025
4.8
(0.19)
17.73 -0.26
(0.70)
15.88 -0.03
(0.63)
20
(0.79)
4
(0.16)
3.2
(0.13)
58.7
(2.31)
Code L6
34
(1.34)
Square key
4.8 x 4.8 x 22.2
(0.19 x 0.19 x 0.87)
3.2
(0.13)
19.05
(0.75) -0.03
21.23
(0.84) -0.26
4.8
(0.19)
20
(0.79)
22.2
(0.87)
31.8
(1.25)
14
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
16
15
14
32
30
28
13
26
12
24
11
22
20
19
18
Flow [l/min]
Fluid Temperature = 45 2C
Viscosity = 36mm2/s
Flow [l/min]
PGP511 - 10.0 CC
Fluid Temperature = 45 2C
Viscosity = 36mm2/s
Input power [kW]
PGP511 - 6.0 CC
40
38
34
16
32
15
30
14
28
13
26
10
20
9.0
18
8.0
16
10
20
7.0
14
9.0
18
6.0
12
12
24
11
22
8.0
16
7.0
14
6.0
12
5.0
10
4.0
8.0
5.0
10
3.0
6.0
4.0
8.0
3.0
6.0
2.0
4.0
1.0
2.0
2.0
4.0
1.0
2.0
50
100
150
200
250
300
Pressure [bar]
36
17
50
100
PGP511 - 19.0 CC
PGP511 - 33.0 CC
Fluid Temperature = 45 2C
Viscosity = 36mm2/s
Fluid Temperature = 45 2C
Viscosity = 36mm2/s
150
200
250
300
Pressure [bar]
Performance data shown is based upon a series of laboratory tests and is not representative of any one unit.
15
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Pump Combinations
Integral Valve Options and Market Experience
Brake Valve
Hydraulic Motors
Applications:
Materials Handling
Electric Lift Trucks
Construction Equipment
Road Construction
Wheel Loaders
Backhoe-Loaders
Haul Trucks
16
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
Catalog HY09-0500/US
Second pump
PGP 505
PGP 505
PGP 511
PGP 511
Flow Velocity
v [m/s]
0.10
900
700
0.15
600
500
0.20
400
0.30
300
Maximum recommended
velocity for
200
0.50
150
100
80
0.40
90
70
60
060
70
60
2.50
070
50
2.00
090
40
1.50
1.20
30
1.25
1.00
50
20
40
0.75
HFB, HFC
Oil
Tank Return
10
1.50
2.00
2.50
3.00
HFB, HFC
0.50
20
1.00
Inlet
15
30
080
4.00
Outlet
5.00
Oil
15
6.00
7.00
8.00
10
8
9.00
10.00
9
7
15.00
6
5
20.00
4
3
d [mm] =
400 Q [l/min]
6
v [m/s]
30.00
40.00
50.00
17
Catalog HY09-0500/US
Offer of Sale
PGP/PGM500 Series
Single or Multiple Aluminum Pumps & Motors
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized
distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This
offer and its acceptance by any customer (Buyer) shall be governed by all of the following Terms and Conditions. Buyers order for any such items, when
communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor (Seller) verbally or in writing, shall constitute acceptance of this
offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,
offers, acknowledgments, acceptances and sales of Sellers products are
subject to and shall be governed exclusively by the terms and conditions
stated herein. Buyers acceptance of any offer to sell is limited to these
terms and conditions. Any terms or conditions in addition to, or inconsistent
with those stated herein, proposed by Buyer in any acceptance of an
offer by Seller, are hereby objected to. No such additional, different or
inconsistent terms and conditions shall become part of the contract
between Buyer and Seller unless expressly accepted in writing by Seller.
Sellers acceptance of any offer to purchase by Buyer is expressly
conditional upon Buyers assent to all the terms and conditions stated
herein, including any terms in addition to, or inconsistent with those
contained in Buyers offer, Acceptance of Sellers products shall in all
events constitute such assent.
2. Payment: Payment shall be made by Buyer net 30 days from the date
of delivery of the items purchased hereunder. Amounts not timely paid
shall bear interest at the maximum rate permitted by law for each month
or portion thereof that the Buyer is late in making payment. Any claims by
Buyer for omissions or shortages in a shipment shall be waived unless
Seller receives notice thereof within 30 days after Buyers receipt of the
shipment.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall be
made F.O.B. Sellers plant. Regardless of the method of delivery, however,
risk of loss shall pass to Buyer upon Sellers delivery to a carrier. Any
delivery dates shown are approximate only and Seller shall have no liability
for any delays in delivery.
4. Warranty: Seller warrants that the items sold hereunder shall be free
from defects in material or workmanship for a period of 18 months from
date of shipment from Parker Hannifin Corporation. THIS WARRANTY
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING
TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER
WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND
WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT
LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE,
WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF
LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY
DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE
NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED
WHOLLY OR PARTIALLY, TO BUYERS DESIGNS OR SPECIFICATIONS.
5. Limitation Of Remedy: SELLERS LIABILITY ARISING FROM OR IN
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF
THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY
BUYER, AT SELLERS SOLE OPTION. IN NO EVENT SHALL SELLER
BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING
BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY
CONNECTED WITH THIS AGREEMENT OR ITEMS SOLD HEREUNDER,
WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT,
EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING
WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT
LIABILITY.
6. Changes, Reschedules and Cancellations: Buyer may request to
modify the designs or specifications for the items sold hereunder as well
as the quantities and delivery dates thereof, or may request to cancel all or
part of this order, however, no such requested modification or cancellation
shall become part of the contract between Buyer and Seller unless
accepted by Seller in a written amendment to this Agreement. Acceptance
of any such requested modification or cancellation shall be at Sellers
discretion, and shall be upon such terms and conditions as Seller may
require.
7. Special Tooling: A tooling charge may be imposed for any special
tooling, including without limitation, dies, fixtures, molds and patterns,
acquired to manufacture items sold pursuant to this contract. Such special
tooling shall be and remain Sellers property notwithstanding payment
of any charges by Buyer. In no event will Buyer acquire any interest in
apparatus belonging to Seller which is utilized in the notwithstanding any
charges paid by Buyer. Unless otherwise agreed, Seller shall have the right
to alter, discard or otherwise dispose of any special tooling or other property
in its sole discretion at any time.
18
Parkers Charter
To be a leading worldwide manufacturer of components
and systems for the builders and users of durable
goods. More specifically, we will design, market and
manufacture products controlling motion, flow and
pressure. We will achieve profitable growth through
premier customer service.
Product Information
North American customers seeking product information,
the location of a nearby distributor, or repair services
will receive prompt attention by calling the Parker Product Information Center at our toll-free number:
1-800-C-PARKER (1-800-272-7537). In the UK, a similar
service is available by calling 0500-103-203.
The Instrumentation
Group is a global leader
in the design, manufacture
and distribution of highquality critical flow
components for worldwide
processinstrumentation,
ultra-high-purity, medical
and analytical applications.
19
09/10