Midielcor
Midielcor
Midielcor
Housing
Dimensions (w x h x d)
Weight
Protection class
Working temperature
Control panel
Display
Power supply
Measuring temperature range
Measuring pressure ranges (bar, absolute)
MID certified
- standard ranges
- enhanced ranges
without MID
- standard ranges
Accuracy
Communication interface
Communication speed
Digital inputs
Digital outputs
Analog outputs
Approvals
Approved according to the European metrology standard
EN 12405-01 and 2004/22/EC (MID)
ATEX approval for installation into hazardous area
Classification (according to EN 60 079-0, EN 60 079-11)
Accessories
Standard delivery
polycarbonate
225 x 220 x 82 mm
2.4 kg
IP 65 (EN 60529)
-25C to +70C
6 button keypad
graphical backlit LCD display (also in battery mode),
128 x 64 pixels
2 lithium battery packs, operating time more than 5 years in
defined condition with option of intrinsic safe power supply (JBZ02)
-25C to +60C
0.8 - 5.2; 2 - 10; 4 - 20; 7 - 35; 14 - 70
0.8 - 10; 4 - 70
0.8 - 5.2; 0.8 - 10; 0.8 - 20; 0.8 - 35; 0.8 - 70
<0.5 % from measured value (MID)
<0.15 % typically from measured value
RS-232 / RS-485 serial interface
optical interface IEC-1107
GSM/GPRS modem
RS232/RS485: 9.6 - 57.6 kbit/sec
optical interface (IEC-1107): 9.6 - 38.4 kbit/sec
4 digital inputs (configurable as LF or binary)
4 digital outputs (configurable as pulse or binary output)
up to 4 analog outputs by using external CL1 module; 4-20mA
midiELCOR
Optimal solution for custody transfer measurement
users manual
TELVES - service and data collection software
Optional accessories
Installation material
Power supply
Module of current loop
Separation and communication modules
Digital transducers
Optical probes
Expansion module for digital transducer connection
BATTERY POWERED
GAS VOLUME CONVERSION DEVICE
with integrated GSM/GPRS modem
L072EN_201010_midiElcor
Revision 0
Basic description
midiELCOR compact volume conversion device with
integrated GSM/GPRS modem is based on modern
components ensuring accurate calculation of volume and
measurement of pressure and temperature with high accuracy.
midiElcor is designed for converting of gas volume in operating
conditions to gas volume in standard conditions according to
state equation. For that purpose, it reads pulses from gas
meter, measures gas temperature and pressure.
midiElcor belongs to the new generation of electronic
volume conversion devices and it is constructed on the latest
microprocessor technology. The device provides large capacity
of archives and enables flexibly to change period of data
recording.
The device supports various selection of algorithms for
compressibility calculation.
As a standard function the device offers generator of
output digital pulses which respond to primary and standard
volume and flow, alarm signals or other quantities selected by
service software.
Protection of data is secured either by hardware
switch or by using programmable passwords.
midiElcor is battery power supplied with possibility to
connect external power source. All required actual and
calculated values are presented on back lighted graphical LCD
display with using of 6-buttons keypad. It is possible to make
basic parametrization through keypad.
Communication with superior system can be realized
via serial interface RS232/RS485, optical port or via integraded
GSM/GPRS modem.
Key features
One channel gas volume conversion device
Possibility to connect additional P or T transducer
Remote download of the firmware
Embedded GSM/GPRS modem
Compact dimensions
4 digital inputs
4 digital outputs
Long battery life
Internal arrangement
Error conditions
The device indicates and stores different errors conditions
which can be set as alarm status, e.g.:
Disturbation of gas meter
Full audit log
Low capacity of battery warning (3 months in advance)
Exceeding of measured range of pressure and temperature
Exceeding of upper limit of flow rate
Temperature sensor
Pt-1000 probe
Length 120 mm, 5.7 mm
Two-wire, cable lenght: 2.5 m (up to 10 m)
Accuracy: <0.1% from measured value
Optional covers
Pressure transducer
Internal or external pressure transducer
cable lenght: 2.5 m (up to 5 m)
Silicon piezorezistive sensor
Connection - thread M12 x 1,5
Accuracy: <0.25 % from measured value
Connectivity
serial interface RS 232
serial interface RS 485
optical port compatible with IEC-1107
dual (quad) band GSM/GPRS modem
TCP/IP protocol is supported. The device is equipped with
communication protocols ELGAS version 2, CTR and
MODBUS. Another protocols can be used on request.
Telemetry features
Device is equipped with functions which are standard for
telemetric systems. It enables monitoring excesses of set
limits, sending alarms to control centre and others.
Dimensions
Software
For setting, communication with the device and basic data
administration Telves software is supplied . This software is
highly sophisticated tool which allows you easy parametrization and maintenance of the device.
Accuracy of measurement
Maximum error: < 0.5 % from measured value
Typical error: < 0.15 % from measured value
Digital inputs
4 digital inputs (configurable as):
LF input (max. 10 Hz, reed contact or Wiegand)
HF input (NAMUR - DIN 19234, max. 5kHz - with external
power supply)
binary input or tamper LF input
binary input NAMUR
encoder
Digital outputs
4 digital outputs (configurable as):
Pulse output (primary volume, standard volume,
odorization control), programmable pulse 0.1 sec to 25 sec
Binary output (alarm etc.)
Analog output - realized trough CL-1 module (4 - 20 mA)
Compressibility formulas
- AGA-8 92DC
- AGA NX-19mod
- SGERG-88
- GOST NX-19mod
- AGA 8-G1
- AGA 8-G2
- Fixed
Installation on pipe
Memory
Memory type: FLASH, 1MB
Data archive: 14300 records (flexible - according to
configured parameters), programmable period: 1 - 60 min
Daily archive: 400 records
Status archive: over 500 records, contains formation and
Extinction of errors, date and time.
Monthly archive: 25 records
Audit log: over 500 records, contains changes of
parameters.
Data protection
Password system
Switch, inside the device
Encryption
Communication interface
Optical interface (IEC-1107)
GSM/GPRS modem
Serial line RS232, RS485