Professional Documents
Culture Documents
Co2 Degasifier To Adjust The PH
Co2 Degasifier To Adjust The PH
3.5 LANPAC
However, there are intrinsic limitations on CO2 removal that cannot be overcome by advanced packing technology. Alkaline water tends to retain CO2, and so stripping becomes inefficient at pH >7.
Drinking Water Chemistry
Carbon dioxide in water is a weak acid. It is naturally present in rainwater, and is also formed by
decay of vegetation in soils and by respiration of aquatic animals. When rainwater percolates
through the ground it dissolves alkaline minerals such as limestone. The water becomes hard and
its pH and alkalinity increase as acidic CO2 is converted to calcium bicarbonate and other salts.
When CO2 dissolves in water, some of it
forms carbonic acid, part of which dissociates into bicarbonate and carbonate ions.
100%
80%
Free CO2
60%
B icarbo nate
40%
Carbo nate
20%
0%
4
pH
10
11
12
13
818-707-2285
sum of free and fixed CO2 is the total CO2. The proportions of these different species depend on the pH of the water, as shown. In very acidic water (pH <5), excess hydrogen ion drives
these equilibrium reactions to the left, so essentially all dissolved CO2 is free CO2, and stripping
process design is relatively simple.
Tower Design Considerations
18
16
14
12
10
7.5
Tower designs based on such an optimistic assumption are usually offered without a performance warranty, for obvious reasons. In some cases, what at first appeared to be an economical
tower later turned out to be an undersized unit that failed to perform as required, resulting in
costly penalties or litigation for the system supplier, and chemical cost overruns for the drinking
water system.
Let the buyer beware!
Complementary Design Service
Lantec Products provides free design consultation to users of is products, with performance guarantees for degasifiers that are properly sized and operated.
.
818-707-2285