DB-HSDPA (RAN16.0 - Draft A) PDF
DB-HSDPA (RAN16.0 - Draft A) PDF
Draft A
Date
2014-01-20
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or representations
of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website:
http://www.huawei.com
Email:
WCDMA RAN
DB-HSDPA Feature Parameter Description
Contents
Contents
1 About This Document..................................................................................................................1
1.1 Scope..............................................................................................................................................................................1
1.2 Intended Audience..........................................................................................................................................................1
1.3 Change History...............................................................................................................................................................1
2 Overview.........................................................................................................................................3
2.1 Background.....................................................................................................................................................................3
2.2 Definition........................................................................................................................................................................4
2.2.1 Introduction.................................................................................................................................................................4
2.2.2 Basic Concepts............................................................................................................................................................5
2.2.3 Combination of Frequency Bands...............................................................................................................................6
2.3 Benefits...........................................................................................................................................................................7
3 Technical Description...................................................................................................................8
3.1 Introduction....................................................................................................................................................................9
3.1.1 DB-HSDPA Cell Group..............................................................................................................................................9
3.1.2 Requirements for NEs.................................................................................................................................................9
3.1.3 Function Summary....................................................................................................................................................10
3.2 Radio Bearer Policy......................................................................................................................................................11
3.3 Load Control.................................................................................................................................................................12
3.3.1 Load Evaluation.........................................................................................................................................................12
3.3.2 Selection of Primary and Secondary Cells................................................................................................................13
3.3.3 Periodic DRD............................................................................................................................................................14
3.3.4 Call Admission Control.............................................................................................................................................15
3.3.5 Preemption and Queuing...........................................................................................................................................16
3.3.6 Congestion Control....................................................................................................................................................16
3.4 Scheduling....................................................................................................................................................................16
3.5 State Transition.............................................................................................................................................................17
3.6 Mobility Management..................................................................................................................................................17
3.6.1 Measurement Control................................................................................................................................................17
3.6.2 DB-HSDPA Handovers.............................................................................................................................................18
3.7 Dynamic Shutdown of Cells.........................................................................................................................................19
4 Related Features...........................................................................................................................20
Issue Draft A (2014-01-20)
ii
WCDMA RAN
DB-HSDPA Feature Parameter Description
Contents
5 Network Impact...........................................................................................................................22
5.1 WRFD-150209 DB-HSDPA........................................................................................................................................22
5.2 WRFD-150227 DB-HSDPA+MIMO...........................................................................................................................23
6 Engineering Guidelines.............................................................................................................24
6.1 WRFD-150209 DB-HSDPA........................................................................................................................................25
6.1.1 When to Use DB-HSDPA.........................................................................................................................................25
6.1.2 Required Information................................................................................................................................................25
6.1.3 Planning.....................................................................................................................................................................25
6.1.3.1 RF Planning............................................................................................................................................................25
6.1.3.2 Network Planning...................................................................................................................................................26
6.1.3.3 Hardware Planning.................................................................................................................................................26
6.1.4 Deployment...............................................................................................................................................................26
6.1.4.1 Requirements..........................................................................................................................................................26
6.1.4.2 Data Preparation.....................................................................................................................................................27
6.1.4.3 Precautions..............................................................................................................................................................28
6.1.4.4 Activation...............................................................................................................................................................28
6.1.4.4.1 Using MML Commands......................................................................................................................................28
6.1.4.4.2 MML Command Examples.................................................................................................................................28
6.1.4.4.3 Using the CME....................................................................................................................................................29
6.1.4.5 Activation Observation...........................................................................................................................................30
6.1.4.6 Deactivation............................................................................................................................................................31
6.1.4.6.1 Using MML Commands......................................................................................................................................31
6.1.4.6.2 MML Command Examples.................................................................................................................................31
6.1.4.6.3 Using the CME....................................................................................................................................................31
6.1.5 Performance Monitoring............................................................................................................................................32
6.1.6 Parameter Optimization.............................................................................................................................................34
6.1.7 Troubleshooting.........................................................................................................................................................34
6.2 WRFD-150227 DB-HSDPA+MIMO...........................................................................................................................35
6.2.1 When to Use DB-HSDPA+MIMO............................................................................................................................35
6.2.2 Required Information................................................................................................................................................35
6.2.3 Planning.....................................................................................................................................................................35
6.2.3.1 RF Planning............................................................................................................................................................35
6.2.3.2 Network Planning...................................................................................................................................................36
6.2.3.3 Hardware Planning.................................................................................................................................................36
6.2.4 Deployment...............................................................................................................................................................36
6.2.4.1 Requirements..........................................................................................................................................................36
6.2.4.2 Data Preparation.....................................................................................................................................................36
6.2.4.3 Precautions..............................................................................................................................................................37
6.2.4.4 Activation...............................................................................................................................................................37
Issue Draft A (2014-01-20)
iii
WCDMA RAN
DB-HSDPA Feature Parameter Description
Contents
7 Parameters.....................................................................................................................................43
8 Counters......................................................................................................................................161
9 Glossary.......................................................................................................................................172
10 Reference Documents.............................................................................................................173
iv
WCDMA RAN
DB-HSDPA Feature Parameter Description
1.1 Scope
This document describes the Dual-Band HSDPA (DB-HSDPA) feature, including basic
principles, feature dependencies, network impact, and engineering guidelines.
DB-HSDPA involves the following features:
l
WRFD-150209 DB-HSDPA
WRFD-150227 DB-HSDPA+MIMO
Feature change
Changes in features of a specific product version
Editorial change
Changes in wording or addition of information that was not described in the earlier version
Draft A(2014-01-20)
Compared with Issue 04(2013-12-30) of RAN15.0, Issue Draft A(2014-01-20) of RAN16.0
includes the following changes.
Issue Draft A (2014-01-20)
WCDMA RAN
DB-HSDPA Feature Parameter Description
Change Type
Change Description
Parameter Change
Feature change
None
None
WCDMA RAN
DB-HSDPA Feature Parameter Description
2 Overview
Overview
2.1 Background
In releases earlier than 3GPP Release 8, UEs could use only single-carrier HSDPA (SC-HSDPA)
to transmit data. 3GPP Release 8 and later releases introduced multi-carrier HSDPA to improve
the performance and throughput of HSDPA services. Compared with SC-HSDPA, multi-carrier
HSDPA doubles user throughput or more.
Figure 2-1 illustrates the evolution of multi-carrier HSDPA in 3GPP technical specifications
(TSs).
WCDMA RAN
DB-HSDPA Feature Parameter Description
2 Overview
In 3GPP Release 8, a single user can use two carriers in the same frequency band for
downlink data transmission. This is known as Dual-Carrier HSDPA (DC-HSDPA).
In 3GPP Release 9, a single user can use two carriers in different frequency bands for data
transmission. This is known as Dual-Band HSDPA (DB-HSDPA).
In 3GPP Release 10, DB-HSDPA works with MIMO (DB-HSDPA+MIMO for short) to
further increase user throughput.
2.2 Definition
2.2.1 Introduction
This document describes two features:
l
WRFD-150209 DB-HSDPA
This feature is available from RAN15.0 and is a optional feature.
The DB-HSDPA feature enables a UE to simultaneously establish HSDPA connections in
two inter-band co-coverage cells. With this feature, the UE can use the resources of two
cells operating in different frequency bands, which increases the peak throughput.
WCDMA RAN
DB-HSDPA Feature Parameter Description
2 Overview
WRFD-150227 DB-HSDPA+MIMO
This feature is available from RAN15.0 and is a trial feature.
The DB-HSDPA+MIMO feature is introduced in 3GPP Release 10. It combines DBHSDPA introduced in 3GPP Release 9 and MIMO introduced in 3GPP Release 7. This
feature enables the NodeB to simultaneously send HSDPA data to a UE over two carriers
in different frequency bands by using MIMO.
In RAN15.0, the DB-HSDPA+MIMO feature supports the following configurations:
Only one carrier in a DB-HSDPA cell group is configured to support MIMO. The
theoretical peak rate of this configuration is 63 Mbit/s.
Both carriers in a DB-HSDPA cell group are configured to support MIMO. The
theoretical peak rate of this configuration is 84 Mbit/s.
Both cells in a DC-HSDPA cell group operate in the same frequency band.
WCDMA RAN
DB-HSDPA Feature Parameter Description
2 Overview
DB-HSDPA User
As shown in Figure 2-2, the UE that simultaneously establishes HSDPA connections with both
the primary and secondary cells in a DB-HSDPA cell group is called a DB-HSDPA user.
The concept of DB-HSDPA user is specific to a service. A DB-HSDPA user must satisfy the
following conditions:
l
The network status meets the requirements of initiating the DB-HSDPA service.
Combination of Frequency
Bands
Uplink
Frequency
Band
Downlink
Frequency
Band
I or VIII
I and VIII
II or IV
II and IV
WCDMA RAN
DB-HSDPA Feature Parameter Description
2 Overview
DB-HSDPA
Configuratio
n
Combination of Frequency
Bands
Uplink
Frequency
Band
Downlink
Frequency
Band
I or V
I and V
I or XI
I and XI
II or V
II and V
NOTE
The NodeB radio frequency (RF) modules must support the frequency bands of DB-HSDPA cell groups.
However, Huawei RF modules do not support Band XI currently. Therefore, the frequency band
combination of 2100 MHz + 1500 MHz is not supported in RAN15.0.
In RAN15.0, DB-HSDPA supports only the combination of frequency bands defined by 3GPP
Release 10 TS 25.101. The UMTS 900 MHz frequencies used by DB-HSDPA support nonstandard bandwidth, for example, 4.2 MHz or 3.8 MHz. For details about non-standard
bandwidth, see GU 900 MHz Non-standard Frequency Spacing Feature Parameter
Description.
2.3 Benefits
The DB-HSDPA feature provides the following benefits for multi-band networks:
l
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
Technical Description
This chapter describes the basic principles of DB-HSDPA. Unless otherwise specified, the
description in this chapter also applies to DB-HSDPA+MIMO.
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
3.1 Introduction
3.1.1 DB-HSDPA Cell Group
Restrictions
The two cells in a DB-HSDPA cell group must meet all of the following requirements:
l
The two cells operate in different frequency bands and the bandwidth does not exceed 5
MHz. The combination of the frequency bands must comply with those listed in Table
2-1.
The two cells belong to the same sector of a NodeB and have the same coverage.
The two cells are in the same downlink resource group of a NodeB.
The two cells have the same time offset (specified by the TCELL parameter).
Characteristics
The primary and secondary cells in a DB-HSDPA cell group have the following characteristics:
l
Uplink channels
DB-HSDPA users establish all uplink channels only in the primary cell. The uplink
channels include the DPCCH, DPDCH, HS-DPCCH, and HSUPA-related uplink channels.
Downlink channels
DB-HSDPA users establish HSDPA-related downlink channels (HS-SCCH and HSPDSCH) and R99 downlink channels (DPCH or F-DPCH) in the primary cell but establish
only HSDPA-related downlink channels in the secondary cell.
Therefore, when a DB-HSDPA user processes combined services, HSDPA data is
transmitted in both the primary and secondary cells, whereas R99 data is transmitted only
in the primary cell.
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
Requirement
CN
The CN must support a downlink peak rate of 42 Mbit/s (DB-HSDPA with 64QAM)
or 84 Mbit/s (DB-HSDPA+MIMO with 64QAM).
RNC
Node
B
The NodeB must support MAC-ehs. A MAC-ehs entity enables the DB-HSDPA
user to simultaneously receive data in the primary and secondary cells under the
same NodeB.
UE
Description
See Section
Radio bearer
Load control
Scheduling
3.4 Scheduling
State
transition
3.5 State
Transition
Mobility
management
3.6 Mobility
Management
10
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
Function
Description
See Section
Traffic-Based
Activation
and
Deactivation
of the
Supplementar
y Carrier In
Multi-carrier
Dynamic cell
shutdown
DB-HSDPA+DL 64QAM
DB-HSDPA and downlink 64QAM can be used together. Downlink 64QAM can be
configured in one cell or both cells of a DB-HSDPA cell group.
With DB-HSDPA and downlink 64QAM, the single-user peak rate can reach 42 Mbit/s.
DB-HSDPA+MIMO
DB-HSDPA and MIMO can be used together. MIMO can be configured in one cell or both
cells of a DB-HSDPA cell group.
When DB-HSDPA+MIMO is enabled in a cell and the UE is capable of DB-HSDPA
+MIMO, the peak downlink rate of the UE can reach 84 Mbit/s if the Downlink 64QAM
feature is also enabled.
DB-HSDPA+CPC
11
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
The Continuous Packet Connectivity (CPC) feature can be used in a DB-HSDPA cell group.
However, note the following restrictions when using the combination:
CPC DTX is applied only to the primary cell because there is no uplink control channel
in the secondary cell.
CPC HS-SCCH Less Operation is applied only to the primary cell.
The primary and secondary cells must have the same CPC DRX activation states and
data transmission patterns for a DB-HSDPA user.
l
Uplink bearer
The TCP protocol is widely used during data transmission.
When a UE downloads a file, TCP acknowledgement messages are sent in the uplink. The higher
the download rate, the broader the required uplink bandwidth. If the download rate is 42 Mbit/
s or higher, the required uplink rate must be far greater than 384 kbit/s. However, 384 kbit/s is
the highest data rate supported by the DCH. Therefore, HSUPA must be used in the uplink to
provide broader bandwidth. The single-user peak rate can reach 42 Mbit/s or higher in the
downlink only when HSUPA is used in the uplink.
12
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
NOTE
l The method for calculating the downlink cell power in a DC-HSDPA cell is the same as that for
calculating the downlink cell power in a DB-HSDPA or 4C-HSDPA cell only when the DC-HSDPA
cell has the Flexible Dual Carrier HSDPA feature enabled. For details about the methods for calculation
the downlink cell power in a DC-HSDPA, DB-HSDPA, or 4C-HSDPA cell, see Call Admission Control
Feature Parameter Description.
l Huawei 4C-HSDPA feature includes 3C-HSDPA and 4C-HSDPA scenarios.
l GBP is the power required for the guaranteed bit rate (GBR) in the downlink.
13
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
If this switch is turned off, the RNC randomly ranks the cells.
If this switch is turned on, the RNC ranks the cell in descending order by cell load.
Based on the ranking of candidate cells, the RNC performs CAC as follows: If the target
cell supports DB-HSDPA, the RNC selects a cell with the lightest load from the possible
secondary cell list to form a DB-HSDPA cell group with the target cell and then performs
CAC.
If the target cell does not support DB-HSDPA, the RNC regards the UE as a non-DBHSDPA user and then performs CAC.
If the call admission fails, the RNC selects a candidate cell with a lower priority and performs
CAC. The RNC repeats this process until the admission succeeds.
If the cell in which the admission succeeds supports DB-HSDPA, the cell is the primary cell and
the other cell is the secondary cell for the DB-HSDPA user. If the cell in which the admission
succeeds does not support DB-HSDPA, DB-HSDPA cannot be configured for the UE. When
this occurs, the RNC configures the UE with a technique supported by the cell.
14
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
The user can use DB-HSDPA or DB-HSDPA+MIMO according to the radio bearer policy.
When the timer expires, the RNC attempts to configure DB-HSDPA/DB-HSDPA+MIMO for
the user.
For details about periodic DRD, see Directed Retry Decision Feature Parameter Description.
15
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
When the downlink load in a cell exceeds the basic congestion threshold, the RNC cannot
perform inter-frequency or inter-RAT handovers on DB-HSDPA users whose secondary
cell is this cell. If the RNC performs inter-frequency handovers on DB-HSDPA users whose
primary cell is this cell, the target cells must not be the secondary cells of these DB-HSDPA
users.
When the downlink load in a cell exceeds the overload congestion threshold, the RNC takes
LDR actions on the DB-HSDPA users whose primary cell is this cell but cannot take LDR
actions on the DB-HSDPA users whose secondary cell is this cell.
3.4 Scheduling
The NodeB transmits downlink data to each DB-HSDPA user in the primary and secondary
cells. However, the data comes from the same MAC-ehs queue for a DB-HSDPA user. The
NodeB jointly schedules data from the MAC-ehs queue for transmission according to the
resources of the primary and secondary cells.
The method for calculating the scheduling priority of a DB-HSDPA user in the primary and
secondary cells is basically the same as the method for calculating the scheduling priority of an
SC-HSDPA user. For details about SC-HSDPA scheduling, see HSDPA Feature Parameter
Description. This section describes only the difference between the two methods.
When calculating the scheduling priority of a DB-HSDPA user in the primary and secondary
cells, the RNC considers the CQI in each cell and the sum of the Uu interface rates. In the
proportional fair (PF) and enhanced proportional fair (EPF) scheduling algorithms, the R/r value
is a major factor affecting the scheduling priority of a UE. The R/r value is positively correlated
to the scheduling priority. The method for calculating R/r for a DB-HSDPA user is different
from that for an SC-HSDPA user:
Issue Draft A (2014-01-20)
16
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
For an SC-HSDPA user, R indicates the throughput that corresponds to the CQI of the
current cell reported by the user, and r indicates the user's throughput in the current cell.
For a DB-HSDPA user, R indicates the throughput that corresponds to the CQI of the
current cell reported by the user, and r indicates the sum of the user's throughput in the
primary and secondary cells.
DB-HSDPA cells
DB-HSDPA does not affect the trigger of handover measurement and the handover procedure.
However, during a handover, the RNC needs to determine whether the user can go on to be a
DB-HSDPA user after the handover if the target cell supports DB-HSDPA.
This section describes only the mobility management of DB-HSDPA users. For details about
handovers, see Handover Feature Parameter Description.
17
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
radio signal quality of the primary cell triggers event 2D, DB-HSDPA users start inter-frequency
measurement.
In inter-frequency measurement control, the RNC determines whether to start the compressed
mode indicator based on the inter-band measurement capability of the user:
l
DB-HSDPA Users
For DB-HSDPA users, the RNC determines whether to trigger a handover based on the radio
signal quality in the primary cell and determines whether the handover is an intra-frequency or
inter-frequency handover based on the frequencies of the primary cell and the target cell.
When an intra-frequency or inter-frequency handover is triggered for a DB-HSDPA user:
l
If DB-HSDPA is enabled in the target cell, the RNC hands over the DB-HSDPA user to
the target cell and configures the cell as the primary cell. If configuring DB-HSDPA in the
target cell fails, the user falls back to SC-HSDPA in the target cell.
If DB-HSDPA is not enabled in the target cell, the user is handed over to the target cell and
falls back to SC-HSDPA.
In RAN15.0, the Iur interface does not support DB-HSDPA. If the target cell and the primary
cell before the handover belong to different RNCs, the DB-HSDPA user falls back to SC-HSDPA
and then is handed over to the target cell.
Non-DB-HSDPA Users
When a non-DB-HSDPA user (for example, an SC-HSDPA or R99 user) performs a handover,
the user retains the original configuration after the user is handed over to the target cell if the
target cell is a DB-HSDPA cell.
Issue Draft A (2014-01-20)
18
WCDMA RAN
DB-HSDPA Feature Parameter Description
3 Technical Description
If the user supports DB-HSDPA and the DB_HSDPA switch of the RetryCapability parameter
has been turned on, the RNC attempts to configure DB-HSDPA for the user a period after the
handover. The period is specified by the ChannelRetryHoTimerLen parameter. If configuring
DB-HSDPA fails, the RNC starts the channel retry timer. When the timer expires, the RNC
attempts to configure DB-HSDPA for the user. The ChannelRetryTimerLen parameter specifies
the timer length.
19
WCDMA RAN
DB-HSDPA Feature Parameter Description
4 Related Features
Related Features
Impacted Features
DB-HSDPA is affected by the following features:
l
UEs enabled with the WRFD-160103 Terminal Black List feature are prohibited from using
DB-HSDPA.
l
WRFD-150209 DB-HSDPA
WRFD-010684 22 MIMO
20
WCDMA RAN
DB-HSDPA Feature Parameter Description
4 Related Features
Impacted Features
DB-HSDPA+MIMO is affected by the WRFD-160103 Terminal Black List feature.
UEs enabled with the WRFD-160103 Terminal Black List feature are prohibited from using
DB-HSDPA+MIMO.
21
WCDMA RAN
DB-HSDPA Feature Parameter Description
5 Network Impact
Network Impact
Similar to DC-HSDPA and 4C-HSDPA UEs, a DB-HSDPA UE consumes one CE more than a
SC-HSDPA UE.
Network Performance
DB-HSDPA UEs report the CQI and hybrid automatic repeat request (HARQ) ACK/NACK
information about the primary and secondary cells to the RNC in the primary cell. As a result,
the uplink load of the primary cell is increased and the uplink coverage of DB-HSDPA UEs is
reduced. In addition, DB-HSDPA UEs consume more CPU resources than SC-HSDPA UEs.
The impact of DB-HSDPA on uplink load, uplink coverage, and CPU usage can be minimized
by the Traffic-Based Activation and Deactivation of the Supplementary Carrier In Multi-carrier
feature. This feature shuts down the secondary carrier when the traffic volume is low.
Issue Draft A (2014-01-20)
22
WCDMA RAN
DB-HSDPA Feature Parameter Description
5 Network Impact
DB-HSDPA improves spectral efficiency and consequently slightly improves network KPIssuch
as the access success rate and call drop rate.
Similar to DC-HSDPA and 4C-HSDPA UEs, a DB-HSDPA UE consumes one CE more than a
SC-HSDPA UE.
23
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Engineering Guidelines
24
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Operators have inter-band co-coverage cells. In addition, these inter-band co-coverage cells
are in the same sector.
In urban areas where network capacity is not limited, DB-HSDPA provides more benefits
if most services on the live network are burst services.
In suburban or rural areas where network capacity is not limited, DB-HSDPA improves
user experience. The experience improvement is especially noticeable for the cell edge
users.
DB-HSDPA can also be deployed in networks with limited capacity and high downlink load.
However, DB-HSDPA does not provide noticeable gain in this scenario.
Cell load
DB-HSDPA can provide better throughput gains in urban areas where network capacity is
not limited.
Uplink capabilities
If DB-HSDPA UEs use DCHs in the uplink, the downlink peak rates of DB-HSDPA UEs
are restricted, resulting in decreased gains. HSUPA is recommended in the uplink for DBHSDPA UEs.
6.1.3 Planning
6.1.3.1 RF Planning
The RF modules must support the frequency bands on which cells in a DB-HSDPA group
operate.
Issue Draft A (2014-01-20)
25
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
If the license for the Flexible Dual Carrier HSDPA feature is not activated, a cell can belong
to only one DB-HSDPA group. When the license is activated, a cell can belong to multiple
DB-HSDPA or 4C-HSDPA groups.
Cells in a DB-HSDPA group must be carried on the same baseband processing board.
If the base station is a distributed base station, the cells must be processed by the same RRU
or by two cascaded RRUs.
6.1.4 Deployment
6.1.4.1 Requirements
l
Hardware
The RF modules must support the frequency bands serving the cells in a DB-HSDPA
group.
The BTS3812A, BTS3812E, and BTS3812AE do not support DB-HSDPA.
The BTS3803E does not support DB-HSDPA.
The DBS3800 must be configured with a BBU3806 to support DB-HSDPA. In addition,
the BBU3806 must be configured with the EBBC or EBBCd board. The BBU3806C
does not support DB-HSDPA.
The 3900 series base stations (excluding the BTS3902E) must be configured with the
WBBPb3, WBBPb4, WBBPd, or WBBPf board.
Other Features
The prerequisite features for DB-HSDPA have been activated. The prerequisite features
are as follows:
WRFD-010610 HSDPA Introduction Package
WRFD-010685 Downlink Enhanced L2
WRFD-010629 DL 16QAM Modulation
License
The DB-HSDPA license on the NodeB side has been activated. For details on how to
activate the license, see License Management Feature Parameter Description.
The following table details the license.
Feature ID
Feature
Name
License
Control Item
NE
Sales Unit
WRFD-15020
9
DB-HSDPA
DB-HSDPA
Function(per
Cell)
NodeB
Per cell
26
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Others
The UE must belong to HS-DSCH category 25 or higher.
The UE notifies the RNC that it supports DB-HSDPA.
Parameter ID
Setting Notes
Data Source
Channel
Configuration
Strategy Switch:
CFG_HSDPA_DB_
SWITCH
CfgSwitch:
CFG_HSDPA_DB_
SWITCH
Set
CFG_HSDPA_DB_
SWITCH in the
Channel
Configuration
Strategy Switch
parameter to ON.
Engineering design
HspaPlusSwitch:
DB_HSDPA
Set DB_HSDPA
(DB-HSDPA
Function Switch) in
the Cell Hspa Plus
function switch
parameter to ON.
Engineering design
HSPA Technologies
Retried by UEs:
DB_HSDPA
RetryCapability:
DB_HSDPA
After DB-HSDPA is
enabled, if a UE
supports DBHSDPA but is not
configured with a
DB-HSDPA RB, the
DB_HSDPA switch
specifies whether the
UE periodically
performs DRD to use
DB-HSDPA.
Engineering design
InterPlmnMultiCarrSwitch
If cells belonging to
different operators
are allowed to form a
DB-HSDPA group,
set this parameter to
YES. Otherwise, set
this parameter to
NO.
Engineering design
Time Offset
Tcell
27
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
6.1.4.3 Precautions
For the 3900 series base stations, BTS3902E, and BTS3803E, you are advised to run the DEA
UCELL command to deactivate the cells to be added to a DB-HSDPA cell group before
activating DB-HSDPA. Otherwise, online UEs in these cells experience call drops.
For the DBS3800, BTS3812A, BTS3812E, and BTS3812AE, you must run the DEA UCELL
command to deactivate the cells to be added to a DB-HSDPA cell group before activating DBHSDPA.
6.1.4.4 Activation
6.1.4.4.1 Using MML Commands
Step 1 Configure a DB-HSDPA group on the NodeB side.
1.
2.
Run the ADD NODEBMULTICELLGRPITEM command to add cells to the DBHSDPA group.
Step 2 Run the RNC MML command MOD UCELLSETUP to set the Time Offset parameter for the
cells in the DB-HSDPA group according to the prepared data.
Step 3 (Optional) Run the RNC MML command SET UOPERATORSHARINGMODE to set the
Inter-PLMN Multicarrier HSDPA Switch parameter according to the prepared data.
Step 4 Run the RNC MML command SET UCORRMALGOSWITCH to enable DB-HSDPA at the
RNC level by selecting CFG_HSDPA_DB_SWITCH under the Channel Configuration
Strategy Switch parameter.
Step 5 Run the RNC MML command MOD UCELLALGOSWITCH to enable DB-HSDPA at the
cell level by selecting DB-HSDPA(DB-HSDPA Function Switch) under the Cell Hspa Plus
function switch parameter.
Step 6 (Optional) Run the RNC MML command SET UFRC and select DB_HSDPA under the HSPA
Technologies Retried by UEs parameter.
NOTE
Before enabling periodic DRD for DB-HSDPA, enable periodic DRD for other features on which this feature
depends. That is, select the DL_L2_ENHANCE check box under the HSPA Technologies Retried by UEs
parameter.
----End
28
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
When configuring the DB-HSDPA feature on the CME, perform a single configuration first, and then
perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
NodeBMult
iCellGrp
NodeB
Multiple
Carrier Cell
Group ID
MULTICEL
LGRPID
Yes
Multiple
Carrier Cell
Group Type
MULTICEL
LGRPTYPE
Yes
ULOCELL
ID
Yes
Set this
parameter to
HSDPA.
2
NODEBMU
LTICELLG
RPITEM
NodeB
Local Cell
ID
29
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
SN
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
3 (Optional)
UCELLSE
TUP
RNC
Time Offset
Tcell
Yes
UOPERAT
ORSHARI
NGMODE
RNC
InterPLMN
Multicarrie
r HSDPA
Switch
InterPlmnM
ultiCarrSwit
ch
Yes
UCORRM
ALGOSWI
TCH
RNC
Channel
Configurati
on Strategy
Switch
CfgSwitch
Yes
UCELLAL
GOSWITC
H
RNC
Cell Hspa
Plus
function
switch
HspaPlusSw
itch
Yes
7 (Optional)
UFRC
RNC
HSPA
Technologie
s Retried by
UEs
RetryCapabi
lity
Yes
NOTE
This
parameter
must be set
according to
the prepared
data.
4 (Optional)
NOTE
This
parameter
must be set
according to
the prepared
data.
NOTE
This
parameter
must be set
according to
the prepared
data.
30
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Expected result: If the value of the preceding counter is not zero, DB-HSDPA is working
properly.
----End
6.1.4.6 Deactivation
6.1.4.6.1 Using MML Commands
Operators can temporarily disable DB-HSDPA by performing steps 1 and 2. When DB-HSDPA
is temporarily disabled, operators can enable it by turning on the switches in steps 1 and 2. If
you need to completely disable DB-HSDPA, perform steps 1 through 4.
Perform the following operations to deactivate DB-HSDPA:
Step 1 Run the RNC MML command MOD UCELLALGOSWITCH to disable DB-HSDPA at the
cell level by deselecting DB-HSDPA(DB-HSDPA Function Switch) under the Cell Hspa Plus
function switch parameter.
Step 2 Run the RNC MML command SET UCORRMALGOSWITCH to disable DB-HSDPA at the
RNC level by deselecting CFG_HSDPA_DB_SWITCH under the Channel Configuration
Strategy Switch parameter.
Step 3 Run the NodeB MML command RMV NODEBMULTICELLGRPITEM to remove cells
from the DB-HSDPA group.
Step 4 Run the NodeB MML command RMV NODEBMULTICELLGRP to remove the DB-HSDPA
group.
----End
When configuring the DB-HSDPA feature on the CME, perform a single configuration first, and then
perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
31
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLAL
GOSWITC
H
RNC
Cell Hspa
Plus
function
switch
HspaPlusSw
itch
Yes
UCORRM
ALGOSWI
TCH
RNC
Channel
Configurati
on Strategy
Switch
CfgSwitch
Yes
NODEBMU
LTICELLG
RPITEM
NodeB
Local Cell
ID
ULOCELL
ID
Yes
NodeBMult
iCellGrp
NodeB
Multiple
Carrier Cell
Group ID
MULTICEL
LGRPID
Yes
Measurem
ent Unit
Description
Feature
ID
Feature
Name
VS.HSDPA.RAB.
DB.AttEstab
HSDPA.Cel
l
WRFD-1
50209
DB-HSDPA
VS.HSDPA.RAB.
DB.SuccEstab
HSDPA.Cel
l
Number of Successful
RAB Setups for Cell When
DB-HSDPA Applied
WRFD-1
50209
DB-HSDPA
32
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Counter Name
Measurem
ent Unit
Description
Feature
ID
Feature
Name
VS.HSDPA.RAB.
AbnormRel.DB
HSDPA.Cel
l
Number of Abnormally
Released RABs for Cell
When DB-HSDPA
Applied (RF Exceptions
Considered)
WRFD-1
50209
DB-HSDPA
VS.HSDPA.RAB.
NormRel.DB
HSDPA.Cel
l
Number of Normally
Released RABs for Cell
When DB-HSDPA
Applied
WRFD-1
50209
DB-HSDPA
VS.HSDPA.DB.S
EC.UE.Mean.Cell
HSDPA.Cel
l
WRFD-1
50209
DB-HSDPA
VS.HSDPA.DB.P
RIM.UE.Mean.Ce
ll
HSDPA.Cel
l
WRFD-1
50209
DB-HSDPA
VS.HSDPA.MC.S
EC.UE.Mean.Cell
HSDPA.Cel
l
WRFD-1
50209
DB-HSDPA
VS.MeanTCP.HS
DPA.MC
RTWPTCP.
Cell
Average DL Transmit
Power of 4C-HSDPA/DBHSDPA/DC-HSDPA UEs
for Cell
WRFD-1
50209
DB-HSDPA
VS.MaxTCP.HSD
PA.MC
RTWPTCP.
Cell
Maximum DL Transmit
Power of 4C-HSDPA/DBHSDPA/DC-HSDPA UEs
for Cell
WRFD-1
50209
DB-HSDPA
VS.MinTCP.HSD
PA.MC
RTWPTCP.
Cell
Minimum DL Transmit
Power of 4C-HSDPA/DBHSDPA/DC-HSDPA UEs
for Cell
WRFD-1
50209
DB-HSDPA
Table 6-4 lists the new counter that is added on the NodeB side and is used to measure the
performance of DB-HSDPA.
33
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Table 6-4 New NodeB counter for measuring the performance of DB-HSDPA
Counter Name
Measurement
Unit
Description
VS.DataOutput.DBHSDPA
.Traffic
HSDPA.LOCELL
VS.DBHSDPA.DataTtiNu
m.User
HSDPA.LOCELL
The higher the proportion of UEs supporting DB-HSDPA, the greater the average user rate. The
average user rate is indicated by the VS.HSDPA.MeanChThroughput counter.
6.1.7 Troubleshooting
Table 6-5 describes the alarms related to DB-HSDPA.
Table 6-5 Alarms related to DB-HSDPA
Alarm ID
Alarm
Name
NE
Feature
Description
ALM-222
41
UMTS Cell
MCHSDPA
Function
Fault
RNC
WRFD-150209 DBHSDPA
ALM-268
11
Configured
Capacity
Limit
Exceeding
Licensed
Limit
Node
B
WRFD-150209 DBHSDPA
ALM-282
06
Local Cell
Capability
Decline
Node
B
l WRFD-150209
DB-HSDPA
l WRFD-150227
DB-HSDPA
+MIMO
34
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Radio environment
MIMO provides better gains in areas that often experience multipath propagation and where
the signal-to-interference ratio (SIR) is high. Therefore, DB-HSDPA+MIMO is
recommended in hotspot areas where the cell radius is small.
Traffic volume
DB-HSDPA+MIMO is recommended for areas where the downlink traffic volume is high.
Uplink capabilities
If DB-HSDPA+MIMO UEs use DCHs in the uplink, the downlink peak rates of DBHSDPA+MIMO UEs are restricted, resulting in decreased gains. HSUPA is recommended
in the uplink for DC-HSDPA+MIMO UEs.
6.2.3 Planning
6.2.3.1 RF Planning
The RF modules must support the frequency bands on which cells in a DB-HSDPA group operate
and meet the hardware configuration requirements of MIMO. For details, see 2.2.3 Combination
of Frequency Bands and MIMO Feature Parameter Description.
Issue Draft A (2014-01-20)
35
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
6.2.4 Deployment
6.2.4.1 Requirements
l
Hardware
The DBS3800 must be configured with a BBU3806 to support DB-HSDPA+MIMO.
In addition, the BBU3806 must be configured with the EBBC or EBBCd board. The
BBU3806C does not support DB-HSDPA+MIMO.
The 3900 series base stations (excluding the BTS3902E) must be configured with the
WBBPb3, WBBPb4, WBBPd, or WBBPf board.
The BTS3812A, BTS3812E, and BTS3812AE do not support DB-HSDPA+MIMO.
The BTS3803E does not support DB-HSDPA.
Other Features
The prerequisite features for DB-HSDPA+MIMO have been activated. The prerequisite
features are as follows:
WRFD-150209 DB-HSDPA
WRFD-010684 22 MIMO
License
DB-HSDPA+MIMO is a trial feature and is not under license control.
Others
The UE must support DB-HSDPA and belong to HS-DSCH category 25, 26, 27, 28,
30, 32, 34, or 36.
The cells in DB-HSDPA groups must have 2X2 MIMO enabled.
Parameter ID
Setting Notes
Data
Source
Channel Configuration
Strategy Switch:
CFG_HSDPA_DBMI
MO_SWITCH
CfgSwitch:
CFG_HSDPA_D
BMIMO_SWITC
H
Set
CFG_HSDPA_DBMIMO_S
WITCH in the Channel
Configuration Strategy
Switch parameter to ON.
Engineeri
ng design
DB-HSDPA+MIMO
HSDPADBMIM
O
Engineeri
ng design
36
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Parameter Name
Parameter ID
Setting Notes
Data
Source
HspaPlusSwitch:
DBMIMO_HSDP
A
Engineeri
ng design
HSPA Technologies
Retried by UEs:
DBMIMO_HSDPA
RetryCapability:
DBMIMO_HSDP
A
After DB-HSDPA+MIMO is
enabled, if a UE supports DBHSDPA+MIMO but is not
assigned a DB-HSDPA
+MIMO RB, the
DBMIMO_HSDPA switch
specifies whether the UE
periodically performs DR to
use DB-HSDPA+MIMO.
Engineeri
ng design
6.2.4.3 Precautions
For the 3900 series base stations, BTS3902E, and BTS3803E, you are advised to run the DEA
UCELL command to deactivate the cells to be added to a DB-HSDPA+MIMO cell group before
activating DB-HSDPA+MIMO. Otherwise, online UEs in these cells experience call drops.
For the DBS3800, BTS3812A, BTS3812E, and BTS3812AE, you must run the DEA UCELL
command to deactivate the cells to be added to a DB-HSDPA+MIMO cell group before
activating DB-HSDPA+MIMO.
6.2.4.4 Activation
6.2.4.4.1 Using MML Commands
Perform the following operations to activate DB-HSDPA+MIMO:
Step 1 Run the NodeB MML command MOD ULOCELL to set DB-HSDPA+MIMO to TRUE
(TRUE).
Step 2 Run the RNC MML command SET UCORRMALGOSWITCH to enable DB-HSDPA
+MIMO at the RNC level by selecting CFG_HSDPA_DBMIMO_SWITCH in the Channel
Configuration Strategy Switch parameter.
Step 3 Run the RNC MML command MOD UCELLALGOSWITCH to enable DB-HSDPA+MIMO
at the cell level by selecting DBMIMO_HSDPA(DB-HSDPA+MIMO Function Switch) in
the Cell Hspa Plus function switch parameter.
Step 4 (Optional) Based on the prepared data, run the RNC MML command SET UFRC to select
DBMIMO_HSDPA in the HSPA Technologies Retried by UEs parameter.
Issue Draft A (2014-01-20)
37
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
NOTE
Before enabling periodic DRD for DB-HSDPA+MIMO, enable periodic DRD for other features on which this
feature depends. That is, select the DB_HSDPA and MIMO check boxes under the HSPA Technologies
Retried by UEs parameter.
----End
l When configuring the DB-HSDPA+MIMO feature on the CME, perform a single configuration first,
and then perform a batch modification if required.
l Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
MO
NE
Parameter Name
Parameter
ID
Configu
rable in
CME
Batch
Modific
ation
Center
ULOCELL
Node
B
DB-HSDPA+MIMO
HSDPADBM
IMO
Yes
UCORRMAL
GOSWITCH
RNC
Channel Configuration
Strategy Switch
CfgSwitch
Yes
38
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
SN
MO
NE
Parameter Name
Parameter
ID
Configu
rable in
CME
Batch
Modific
ation
Center
UCELLALGO
SWITCH
RNC
HspaPlusSwit
ch
Yes
4
(Opti
onal)
UFRC
RNC
HSPA Technologies
Retried by UEs
RetryCapabili
ty
Yes
6.2.4.6 Deactivation
6.2.4.6.1 Using MML Commands
Perform the following operations to deactivate DB-HSDPA+MIMO:
Step 1 Run the RNC MML command MOD UCELLALGOSWITCH to disable DB-HSDPA+MIMO
at the cell level by deselecting DBMIMO_HSDPA(DB-HSDPA+MIMO Function Switch)
in the Cell Hspa Plus function switch parameter.
Step 2 Run the RNC MML command SET UCORRMALGOSWITCH to disable DB-HSDPA
+MIMO at the RNC level by deselecting CFG_HSDPA_DBMIMO_SWITCH in the Channel
Configuration Strategy Switch parameter.
Step 3 Run the NodeB MML command MOD ULOCELL to set DB-HSDPA+MIMO to FALSE
(FALSE).
----End
Issue Draft A (2014-01-20)
39
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
l When configuring the DB-HSDPA+MIMO feature on the CME, perform a single configuration first,
and then perform a batch modification if required.
l Configure the parameters of a single object before a batch modification. Perform a batch modification
before logging out of the parameter setting interface.
MO
NE
Parameter
Name
Parameter
ID
Configura
ble in CME
Batch
Modificati
on Center
UCELLAL
GOSWITC
H
RNC
Cell Hspa
Plus
function
switch
HspaPlusSw
itch
Yes
UCORRM
ALGOSWI
TCH
RNC
Channel
Configuratio
n Strategy
Switch
CfgSwitch
Yes
ULOCELL
NodeB
DB-HSDPA
+MIMO
HSDPADB
MIMO
Yes
40
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
Measurem
ent Unit
Description
Feature
ID
Feature
Name
VS.HSDPA.RAB.
DBMIMO.AttEsta
b
HSDPA.Cel
l
WRFD-1
50227
DB-HSDPA
+MIMO
WRFD-1
50227
DB-HSDPA
+MIMO
WRFD-1
50227
DB-HSDPA
+MIMO
WRFD-1
50227
DB-HSDPA
+MIMO
HSDPA.Cel
l
Number of Successful
RAB Setups for Cell When
DB-HSDPA with MIMO
Applied
This counter is measured
only in the primary cell.
VS.HSDPA.RAB.
AbnormRel.DBM
IMO
HSDPA.Cel
l
Number of Abnormal
Released RABs for Cell
When DB-HSDPA with
MIMO Applied (RF
Exceptions Considered)
This counter is measured
only in the primary cell.
VS.HSDPA.RAB.
NormRel.DBMIM
O
HSDPA.Cel
l
Number of Normally
Released RABs for Cell
When DB-HSDPA with
MIMO Applied
This counter is measured
only in the primary cell.
The counters that are added on the NodeB side and used to measure the performance of DBHSDPA+MIMO are the same as those for DB-HSDPA. For details, see Table 6-4.
The higher the proportion of UEs supporting DB-HSDPA+MIMO, the greater the average user
rate. The average user rate is indicated by the VS.HSDPA.MeanChThroughput counter.
41
WCDMA RAN
DB-HSDPA Feature Parameter Description
6 Engineering Guidelines
6.2.7 Troubleshooting
Table 6-9 describes the alarms related to DB-HSDPA/DB-HSDPA+MIMO.
Table 6-9 Alarms related to DB-HSDPA+MIMO
Alarm ID
Alarm
Name
NE
Feature
Description
ALM-282
06
Local Cell
Capability
Decline
Node
B
l WRFD-150209
DB-HSDPA
l WRFD-150227
DB-HSDPA
+MIMO
42
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameters
NE
MML
Command
Feature ID
Feature Name
Description
TCell
BSC6900
ADD
UCELLSETUP
WRFD-010699
DC-HSDPA
+MIMO
MOD
UCELLSETUP
WRFD-150207
Meaning:Difference between
the System
Frame Number
(SFN) and
NodeB Frame
Number (BFN)
of the NodeB
which the cell
belongs to. It is
recommended
that TCell of all
intra-frequency
neighboring
cells under one
NodeB should
be unique. TCell
of DC carrier
group cells or
MC carrier
group cells must
be the same. For
detailed
information of
this parameter,
see 3GPP TS
25.402.
WRFD-022000
WRFD-150209
Physical
Channel
Management
WRFD-150208
4C-HSDPA
WRFD-150250
DB-HSDPA
WRFD-150223
WRFD-010696
Flexible Dual
Carrier HSDPA
WRFD-150227
3C-HSDPA
WRFD-021309
MC-HSDPA
+MIMO
WRFD-021308
DC-HSDPA
DB-HSDPA
+MIMO
Improved
Downlink
Coverage
Extended Cell
Coverage up to
200km
GUI Value
Range:CHIP0,
CHIP256,
CHIP512,
43
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CHIP768,
CHIP1024,
CHIP1280,
CHIP1536,
CHIP1792,
CHIP2048,
CHIP2304
Unit:chip
Actual Value
Range:CHIP0,
CHIP256,
CHIP512,
CHIP768,
CHIP1024,
CHIP1280,
CHIP1536,
CHIP1792,
CHIP2048,
CHIP2304
Default
Value:None
44
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
TCell
BSC6910
ADD
UCELLSETUP
WRFD-010699
DC-HSDPA
+MIMO
MOD
UCELLSETUP
WRFD-150207
Meaning:Difference between
the System
Frame Number
(SFN) and
NodeB Frame
Number (BFN)
of the NodeB
which the cell
belongs to. It is
recommended
that TCell of all
intra-frequency
neighboring
cells under one
NodeB should
be unique. TCell
of DC carrier
group cells or
MC carrier
group cells must
be the same. For
detailed
information of
this parameter,
see 3GPP TS
25.402.
WRFD-022000
WRFD-150209
Physical
Channel
Management
WRFD-150208
4C-HSDPA
WRFD-150250
DB-HSDPA
WRFD-150223
WRFD-010696
Flexible Dual
Carrier HSDPA
WRFD-150227
3C-HSDPA
WRFD-021309
MC-HSDPA
+MIMO
WRFD-021308
DC-HSDPA
DB-HSDPA
+MIMO
Improved
Downlink
Coverage
Extended Cell
Coverage up to
200km
GUI Value
Range:CHIP0,
CHIP256,
CHIP512,
CHIP768,
CHIP1024,
CHIP1280,
CHIP1536,
CHIP1792,
CHIP2048,
CHIP2304
Unit:chip
Actual Value
Range:CHIP0,
CHIP256,
CHIP512,
CHIP768,
CHIP1024,
CHIP1280,
CHIP1536,
45
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CHIP1792,
CHIP2048,
CHIP2304
Default
Value:None
TxDiversityInd
BSC6900
ADD
UCELLSETUP
WRFD-022000
MOD
UCELLSETUP
WRFD-010684
WRFD-150209
WRFD-010203
WRFD-010704
WRFD-010700
Physical
Channel
Management
DB-HSDPA
2x2 MIMO
Transmit
Diversity
Flexible HSPA+
Technology
Selection
Performace
Improvement of
MIMO and
HSDPA Cocarrier
Meaning:Wheth
er to activate the
transmit
diversity mode
for common
channels in a
cell. Transmit
diversity
enables the
transmit end to
use two or more
antennas for
transmitting
signals. Each
antenna is
assigned
different weight
coefficients,
such as
amplitude and
phase, to
improve the
reception
performance of
the receive end.
GUI Value
Range:TRUE,
FALSE
Unit:None
Actual Value
Range:TRUE,
FALSE
Default
Value:None
46
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
TxDiversityInd
BSC6910
ADD
UCELLSETUP
WRFD-022000
MOD
UCELLSETUP
WRFD-010684
Physical
Channel
Management
Meaning:Wheth
er to activate the
transmit
diversity mode
for common
channels in a
cell. Transmit
diversity
enables the
transmit end to
use two or more
antennas for
transmitting
signals. Each
antenna is
assigned
different weight
coefficients,
such as
amplitude and
phase, to
improve the
reception
performance of
the receive end.
WRFD-150209
WRFD-010203
WRFD-010704
WRFD-010700
DB-HSDPA
2x2 MIMO
Transmit
Diversity
Flexible HSPA+
Technology
Selection
Performace
Improvement of
MIMO and
HSDPA Cocarrier
GUI Value
Range:TRUE,
FALSE
Unit:None
Actual Value
Range:TRUE,
FALSE
Default
Value:None
47
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
HSPAPlusSatis
Switch
BSC6900
ADD
UCELLDRD
WRFD-020400
DRD
Introduction
Package
Meaning:Wheth
er the HSPA+
technical
compliance of
cells is
considered in
the periodic
Directed Retry
Decision (DRD)
process and
blind handoverbased nonperiodic DRD
process. If this
parameter is set
to ON, a cell
with higher
HSPA+
technical
compliance is
preferentially
selected as the
DRD target cell
in the periodic
DRD process
and blind
handover-based
non-periodic
DRD process. If
this parameter is
set to OFF, the
HSPA+
technical
compliance of
cells is not
considered in
the DRD
process.
MOD
UCELLDRD
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:OFF, ON
Default
Value:ON
48
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
HSPAPlusSatis
Switch
BSC6910
ADD
UCELLDRD
WRFD-020400
DRD
Introduction
Package
Meaning:Wheth
er the HSPA+
technical
compliance of
cells is
considered in
the periodic
Directed Retry
Decision (DRD)
process and
blind handoverbased nonperiodic DRD
process. If this
parameter is set
to ON, a cell
with higher
HSPA+
technical
compliance is
preferentially
selected as the
DRD target cell
in the periodic
DRD process
and blind
handover-based
non-periodic
DRD process. If
this parameter is
set to OFF, the
HSPA+
technical
compliance of
cells is not
considered in
the DRD
process.
MOD
UCELLDRD
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:OFF, ON
Default
Value:ON
49
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ServiceDiffDrdSwitch
BSC6900
ADD
UCELLDRD
WRFD-020400
04
Traffic Steering
and Load
Sharing During
RAB Setup
Meaning:Wheth
er to activate the
service-based
DRD algorithm.
This algorithm
is activated only
when this switch
is turned on. In
such a case, the
RNC selects
cells with the
highest service
priority for UE
access.
MOD
UCELLDRD
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:ON, OFF
Default
Value:OFF
ServiceDiffDrdSwitch
BSC6910
ADD
UCELLDRD
MOD
UCELLDRD
WRFD-020400
04
Traffic Steering
and Load
Sharing During
RAB Setup
Meaning:Wheth
er to activate the
service-based
DRD algorithm.
This algorithm
is activated only
when this switch
is turned on. In
such a case, the
RNC selects
cells with the
highest service
priority for UE
access.
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:ON, OFF
Default
Value:OFF
50
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
LdbDRDSwitch
HSDPA
BSC6900
ADD
UCELLDRD
WRFD-020400
04
MOD
UCELLDRD
WRFD-010611
12
Traffic Steering
and Load
Sharing During
RAB Setup
Meaning:Wheth
er to enable the
power balancing
DRD algorithm
for HSDPA
services. During
service setup or
reconfiguration,
this algorithm
enables the RNC
to preferentially
set up services in
cells with more
available power
resources based
on the power
resource usage
in the current
cell and interfrequency
neighboring
cells. Then,
power resources
are balanced
among interfrequency cells.
HSDPA DRD
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:ON, OFF
Default
Value:OFF
51
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
LdbDRDSwitch
HSDPA
BSC6910
ADD
UCELLDRD
WRFD-020400
04
MOD
UCELLDRD
WRFD-010611
12
Traffic Steering
and Load
Sharing During
RAB Setup
Meaning:Wheth
er to enable the
power balancing
DRD algorithm
for HSDPA
services. During
service setup or
reconfiguration,
this algorithm
enables the RNC
to preferentially
set up services in
cells with more
available power
resources based
on the power
resource usage
in the current
cell and interfrequency
neighboring
cells. Then,
power resources
are balanced
among interfrequency cells.
HSDPA DRD
GUI Value
Range:OFF, ON
Unit:None
Actual Value
Range:ON, OFF
Default
Value:OFF
52
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ChannelRetryTi
merLen
BSC6900
SET
UCOIFTIMER
WRFD-010614
03
HSUPA 2ms
TTI
WRFD-021101
Dynamic
Channel
Configuration
Control (DCCC)
Meaning:This
parameter
specifies the
value of the
channel retry
timer. The timer
will start when
traffic is set up
or reconfigured
and some higher
technique is not
configured by
some reason
except for the
capability of UE
or cell. Channel
retry will be
performed after
this timer
expires.
WRFD-010694
WRFD-010693
WRFD-150207
WRFD-010652
UL 16QAM
WRFD-010686
DL 64QAM
+MIMO
WRFD-010687
4C-HSDPA
WRFD-010684
SRB over
HSDPA
WRFD-010685
WRFD-010683
WRFD-010610
08
WRFD-150209
WRFD-010612
06
WRFD-140204
WRFD-010696
WRFD-150250
WRFD-010636
WRFD-010630
WRFD-010632
WRFD-010611
12
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
Downlink
Enhanced L2
Downlink
64QAM
Interactive and
Background
Traffic Class on
HSDPA
GUI Value
Range:0~180
Unit:s
Actual Value
Range:0~180
Default Value:5
DB-HSDPA
Interactive and
Background
Traffic Class on
HSUPA
DC-HSUPA
DC-HSDPA
3C-HSDPA
SRB over
HSUPA
Streaming
Traffic Class on
HSDPA
Streaming
Traffic Class on
HSUPA
53
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
HSDPA DRD
54
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ChannelRetryTi
merLen
BSC6910
SET
UCOIFTIMER
WRFD-010614
03
HSUPA 2ms
TTI
WRFD-021101
Dynamic
Channel
Configuration
Control (DCCC)
Meaning:This
parameter
specifies the
value of the
channel retry
timer. The timer
will start when
traffic is set up
or reconfigured
and some higher
technique is not
configured by
some reason
except for the
capability of UE
or cell. Channel
retry will be
performed after
this timer
expires.
WRFD-010694
WRFD-010693
WRFD-150207
WRFD-010652
UL 16QAM
WRFD-010686
DL 64QAM
+MIMO
WRFD-010687
4C-HSDPA
WRFD-010684
SRB over
HSDPA
WRFD-010685
WRFD-010683
WRFD-010610
08
WRFD-150209
WRFD-010612
06
WRFD-140204
WRFD-010696
WRFD-150250
WRFD-010636
WRFD-010630
WRFD-010632
WRFD-010611
12
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
Downlink
Enhanced L2
Downlink
64QAM
Interactive and
Background
Traffic Class on
HSDPA
GUI Value
Range:0~180
Unit:s
Actual Value
Range:0~180
Default Value:5
DB-HSDPA
Interactive and
Background
Traffic Class on
HSUPA
DC-HSUPA
DC-HSDPA
3C-HSDPA
SRB over
HSUPA
Streaming
Traffic Class on
HSDPA
Streaming
Traffic Class on
HSUPA
55
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
HSDPA DRD
56
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
RetryCapability
BSC6900
SET UFRC
WRFD-010614
03
HSUPA 2ms
TTI
WRFD-010699
WRFD-150207
DC-HSDPA
+MIMO
WRFD-010652
4C-HSDPA
WRFD-010686
SRB over
HSDPA
Meaning:This
parameter
specifies which
HSPA
technologies can
be retried by
UEs. When the
HSPA
technologies are
selected and
currently UE is
not using them,
"RNC" will
initiate these
HSPA
technologies
retry for UE.
WRFD-010687
WRFD-010684
WRFD-010685
CPC - DTX /
DRX
WRFD-010683
WRFD-010697
2x2 MIMO
WRFD-010694
Downlink
Enhanced L2
WRFD-010695
WRFD-150227
WRFD-150209
WRFD-150250
WRFD-010636
WRFD-010696
UL Layer 2
Improvement
Downlink
64QAM
WRFD-150223
E-DPCCH
Boosting
WRFD-010693
UL 16QAM
DB-HSDPA
+MIMO
DB-HSDPA
3C-HSDPA
SRB over
HSUPA
DC-HSDPA
MC-HSDPA
+MIMO
DL 64QAM
+MIMO
GUI Value
Range:SRB_O
VER_HSDPA,
SRB_OVER_H
SUPA,
TTI_2MS,
MIMO,
64QAM,
DL_L2_ENHA
NCE,
DTX_DRX,
HSSCCH_LES
S_OPERATIO
N,
MIMO_64QA
M,
DC_HSDPA,
UL_L2_ENHA
NCE,
UL_16QAM,
EDPCCH_BOO
STING,
DCMIMO_HS
DPA,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
57
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
DPA,
DB_HSDPA
Unit:None
Actual Value
Range:SRB_O
VER_HSDPA,
SRB_OVER_H
SUPA,
TTI_2MS,
MIMO,
64QAM,
DL_L2_ENHA
NCE,
DTX_DRX,
HSSCCH_LES
S_OPERATIO
N,
MIMO_64QA
M,
DC_HSDPA,
UL_L2_ENHA
NCE,
UL_16QAM,
EDPCCH_BOO
STING,
DCMIMO_HS
DPA,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
DPA,
DB_HSDPA
Default
Value:SRB_OV
ER_HSDPA:
0,SRB_OVER_
HSUPA:
0,TTI_2MS:
0,MIMO:
1,64QAM:
1,DL_L2_ENH
ANCE:
1,DTX_DRX:
1,HSSCCH_LE
SS_OPERATIO
58
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
N:
1,MIMO_64QA
M:
0,DC_HSDPA:
0,UL_L2_ENH
ANCE:
0,UL_16QAM:
0,EDPCCH_BO
OSTING:
0,DCMIMO_H
SDPA:
0,DC_HSUPA:
0,HSDPA_4C_
MIMO:
0,HSDPA_4C:
0,DBMIMO_H
SDPA:
0,DB_HSDPA:
0
59
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
RetryCapability
BSC6910
SET UFRC
WRFD-010614
03
HSUPA 2ms
TTI
WRFD-010699
WRFD-150207
DC-HSDPA
+MIMO
WRFD-010652
4C-HSDPA
WRFD-010686
SRB over
HSDPA
Meaning:This
parameter
specifies which
HSPA
technologies can
be retried by
UEs. When the
HSPA
technologies are
selected and
currently UE is
not using them,
"RNC" will
initiate these
HSPA
technologies
retry for UE.
WRFD-010687
WRFD-010684
WRFD-010685
CPC - DTX /
DRX
WRFD-010683
WRFD-010697
2x2 MIMO
WRFD-010694
Downlink
Enhanced L2
WRFD-010695
WRFD-150227
WRFD-150209
WRFD-150250
WRFD-010636
WRFD-010696
UL Layer 2
Improvement
Downlink
64QAM
WRFD-150223
E-DPCCH
Boosting
WRFD-010693
UL 16QAM
DB-HSDPA
+MIMO
DB-HSDPA
3C-HSDPA
SRB over
HSUPA
DC-HSDPA
MC-HSDPA
+MIMO
DL 64QAM
+MIMO
GUI Value
Range:SRB_O
VER_HSDPA,
SRB_OVER_H
SUPA,
TTI_2MS,
MIMO,
64QAM,
DL_L2_ENHA
NCE,
DTX_DRX,
HSSCCH_LES
S_OPERATIO
N,
MIMO_64QA
M,
DC_HSDPA,
UL_L2_ENHA
NCE,
UL_16QAM,
EDPCCH_BOO
STING,
DCMIMO_HS
DPA,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
60
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
DPA,
DB_HSDPA
Unit:None
Actual Value
Range:SRB_O
VER_HSDPA,
SRB_OVER_H
SUPA,
TTI_2MS,
MIMO,
64QAM,
DL_L2_ENHA
NCE,
DTX_DRX,
HSSCCH_LES
S_OPERATIO
N,
MIMO_64QA
M,
DC_HSDPA,
UL_L2_ENHA
NCE,
UL_16QAM,
EDPCCH_BOO
STING,
DCMIMO_HS
DPA,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
DPA,
DB_HSDPA
Default
Value:SRB_OV
ER_HSDPA:
0,SRB_OVER_
HSUPA:
0,TTI_2MS:
0,MIMO:
1,64QAM:
1,DL_L2_ENH
ANCE:
1,DTX_DRX:
1,HSSCCH_LE
SS_OPERATIO
61
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
N:
1,MIMO_64QA
M:
0,DC_HSDPA:
0,UL_L2_ENH
ANCE:
0,UL_16QAM:
0,EDPCCH_BO
OSTING:
0,DCMIMO_H
SDPA:
0,DC_HSUPA:
0,HSDPA_4C_
MIMO:
0,HSDPA_4C:
0,DBMIMO_H
SDPA:
0,DB_HSDPA:
0
62
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
CmpSwitch
BSC6900
SET
UCORRMALG
OSWITCH
WRFD-010610
06
HSDPA
Mobility
Management
Meaning:1.
CMP_IU_IMS_
PROC_AS_NO
RMAL_PS_SW
ITCH: When the
switch is on, the
IMS signaling
assigned by the
CN undergoes
compatibility
processing as an
ordinary PS
service. When
the switch is not
on, no special
processing is
performed. 2.
CMP_IU_QOS
_ASYMMETR
Y_IND_COMP
AT_SWITCH:
When the Iu
QoS
Negotiation
function is
active and the
switch is on, IE
RAB
Asymmetry
Indicator is
Symmetric
bidirectional,
The uplink and
downlink RNC
negotiation rate
is asymmetric,
"RNC" select
the bigger rate as
Iu QoS
negotiation rate.
When the switch
is OFF, "RNC"
select the less
rate as Iu QoS
negotiation rate.
3.
CMP_IU_SYS
HOIN_CMP_I
WRFD-020203
WRFD-020202
WRFD-150209
WRFD-150227
WRFD-021200
DB-HSDPA
WRFD-150223
DB-HSDPA
+MIMO
WRFD-010696
WRFD-010202
WRFD-010612
04
WRFD-140204
WRFD-150250
HCS
(Hierarchical
Cell Structure)
MC-HSDPA
+MIMO
DC-HSDPA
UE State in
Connected
Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
HSUPA
Mobility
Management
DC-HSUPA
3C-HSDPA
63
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
UUP_FIXTO1_
SWITCH:
When the switch
is on, the IUUP
version can be
rolled back to
R99 when
complete
configurations
are applied
during interRAT handover.
4.
CMP_IUR_H2
D_FOR_LOWR
5_NRNCCELL
_SWITCH:
When the switch
is on, H2D is
performed
before a
neighboring
RNC cell whose
version is earlier
than R5 is added
to the active set;
E2D is
performed
before a
neighboring
RNC cell whose
version is earlier
than R6 is added
to the active set.
If the DRNC is
of a version
earlier than R5,
DL services
cannot be
mapped on the
HS-DSCH. If
the DRNC is of a
version earlier
than R6, DL
services cannot
be mapped on
the HS-EDCH.
5.
64
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CMP_IUR_SH
O_DIVCTRL_S
WITCH: When
the switch is on,
the diversity
combination
over the Iur
interface is
configured on
the basis of that
of the local
RNC. When the
switch is not on,
the diversity
combination
over the Iur
interface is
configured on
the basis of
services. The
flag of diversity
combination
over the Iur
interface can be
set to MUST (for
BE services) or
MAY (for other
services). 6.
CMP_UU_ADJ
ACENT_FREQ
_CM_SWITCH
: Whether the
RNC activates
the compressed
mode before
initiating an
inter-frequency
measurement on
a DC-HSDPA or
DB-HSDPA
UE. When this
parameter is set
to ON, the RNC
initiates the
inter-frequency
measurement
without
activating the
65
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
compressed
mode if both the
UE and
EARFCN
support the noncompressed
inter-frequency
measurement.
When this
parameter is set
to OFF, the RNC
activates the
compressed
mode before
initiating the
inter-frequency
measurement.
This switch
takes effect only
in non-flexible
DC cells and DB
cells. 7.
CMP_UU_AM
R_DRD_HHO_
COMPAT_SWI
TCH: This
parameter
specifies to
enable AMR
through DRD
two-step
procedure
function. When
SRB is set up on
DCH, and
"RNC" decides
to setup the
AMR through
DRD procedure,
When the switch
is enabled,
"RNC" will
execute blind
handover to the
target cell, and
then setup the
AMR RBs on
the target cell,
66
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
When the switch
is disabled,
"RNC" will
setup the AMR
RBs on the
target cell
directly. 8.
CMP_UU_AM
R_SID_MUST_
CFG_SWITCH:
For narrowband
AMR services,
when the switch
is on, the SID
frame is always
configured;
when the switch
is not on, the
SID frame is
configured on
the basis of CN
assignment. 9.
CMP_UU_FDP
CH_COMPAT_
SWITCH:
When the switch
is OFF, if the
information
element that
indicates the FDPCH
capability of UE
exists in the
message
"RRC_CONNE
CT_REQ" or
"RRC_CONNE
CT_SETUP_C
MP", the FDPCH
capability
depends on that
indicator. In
other case, it
means UE does
not support FDPCH. When
the switch is
67
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
ON, if the
information
element that
indicates the FDPCH
capability of UE
exists in the
message
"RRC_CONNE
CT_REQ" or
"RRC_CONNE
CT_SETUP_C
MP", the FDPCH
capability
depends on that
indicator. If that
information
element does not
exist, UE
supports FDPCH when all
the conditions
meets: a) the
version of UE is
Release 6. b) UE
supports HSPDSCH. 10.
CMP_UU_IGN
ORE_UE_RLC
_CAP_SWITC
H: When the
switch is on, the
RAB
assignment
request and the
subsequent RB
setup procedure
proceed if the
RLC AM
capabilities of
the UE fail to
meet the
minimum RLC
TX/RX window
buffer
requirement of
the RAB to be
68
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
setup. When the
switch is not on,
the RAB
assignment
request is
rejected. 11.
CMP_UU_INT
RA_FREQ_MC
_BESTCELL_C
IO_SWITCH:
When this
switch is on, the
cell individual
offset (CIO) of
the best cell is
always set to 0 in
the INTRAFREQUENCY
MEASUREME
NT CONTROL
messages.
Otherwise, the
CIO information
of the best cell is
not carried in the
INTRAFREQUENCY
MEASUREME
NT CONTROL
messages. 12.
CMP_UU_IOS
_CELL_SYNC
_INFO_REPOR
T_SWITCH:
When the switch
is on, the cell
synchronization
information
traced by the
IOS need to be
reported during
the RRC
measurement
period. 13.
CMP_UU_SER
V_CELL_CHG
_WITH_ASU_
SWITCH:
69
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
When the switch
is on, the active
set update is in
the same
procedure as the
change of the
serving cell.
When the switch
is not on, the
serving cell is
changed after
the UE updates
the active set and
delivers
reconfiguration
of physical
channels. This
switch is
applicable only
to R6 or
aboveUEs. 14.
CMP_UU_SER
V_CELL_CHG
_WITH_RB_M
OD_SWITCH:
When the switch
is on, channel
transition is in
the same
procedure as the
change of the
serving cell.
When the switch
is not on, the
serving cell is
changed after
the UE performs
channel
transition and
delivers
reconfiguration
of physical
channels. 15.
CMP_UU_VOI
P_UP_PROC_
AS_NORMAL_
PS_SWITCH:
By default, the
70
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
switch is on. In
this case, the
Alternative Ebit is not
configured for
L2. 16.
CMP_F2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH: When the
switch is set to
ON, only uplink
RLC or
downlink RLC
can be reestablished
during the state
transition from
CELL_FACH to
CELL_FACH
(F2F for short).
17.
CMP_D2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH: When the
switch is set to
ON, only uplink
RLC or
downlink RLC
can be reestablished
during the state
transition from
CELL_DCH to
CELL_FACH
(D2F for short).
18.
CMP_RAB_5_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 5 can be
configured with
the Robust
Header
71
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Compression
(ROHC)
function. When
the switch is set
to OFF, the
service with
RAB ID 5
cannot be
configured with
the ROHC
function. 19.
CMP_RAB_6_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 6 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 6
cannot be
configured with
the ROHC
function. 20.
CMP_RAB_7_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 7 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 7
cannot be
configured with
the ROHC
function. 21.
CMP_RAB_8_
72
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 8 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 8
cannot be
configured with
the ROHC
function. 22.
CMP_RAB_9_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 9 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 9
cannot be
configured with
the ROHC
function. 23.
CMP_HSUPA_
MACD_FLOW
_MUL_SWITC
H: When the
switch is set to
ON, MAC-d
flow can be
multiplexed
without any
restrictions.
When the switch
is set to OFF,
only MAC-d
73
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
flows whose
scheduling
priority is lower
than that of the
current MAC-d
flow can be
multiplexed. 24.
CMP_SMLC_R
SLT_MODE_T
YPE_SWITCH:
If the Client
Type of a
positioning
request is Value
Added Service
or Lawful
Intercept Client,
the positioning
result is reported
by using the
Ellipsoid Arc
type. For other
client types, the
positioning
result is reported
by using the
Ellipsoid point
with uncertainty
circle type. 25.
CMP_F2P_PR
OCESS_OPTI
MIZATION_S
WITCH: Switch
for optimizing
the procedure
for the
CELL_FACHto-CELL_PCHor-URA_PCH
state transition.
When this
switch is set to
on, F2P state
transition is
performed
through the
physical channel
reconfiguration
74
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
procedure.Whe
n this switch is
set to off, F2P
state transition is
performed
through the RB
reconfiguration
procedure. 26.
CMP_UU_SIB1
1_SIB12_WIT
H_1A1D_SWIT
CH: Whether to
carry parameters
related to events
1A and 1D in
system
information
block type 11
(SIB 11) and
SIB 12.If the
switch of
deferred
measurement
control reading
is turned on, the
UE cannot
promptly read
parameters
related to events
1A and 1D for
intra-frequency
neighboring
cells from SIB
11 or SIB12. As
a result, the UE
cannot perform
soft handovers
in advance. The
switch is set
using
DeferMcReadIn
d in the ADD/
MOD
UCELLMEAS
command.
GUI Value
Range:CMP_IU
75
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
_IMS_PROC_A
S_NORMAL_P
S_SWITCH,
CMP_IU_SYS
HOIN_CMP_I
UUP_FIXTO1_
SWITCH,
CMP_IUR_H2
D_FOR_LOWR
5_NRNCCELL
_SWITCH,
CMP_IUR_SH
O_DIVCTRL_S
WITCH,
CMP_UU_AM
R_SID_MUST_
CFG_SWITCH,
CMP_UU_ADJ
ACENT_FREQ
_CM_SWITCH
,
CMP_UU_IGN
ORE_UE_RLC
_CAP_SWITC
H,
CMP_UU_SER
V_CELL_CHG
_WITH_ASU_
SWITCH,
CMP_UU_SER
V_CELL_CHG
_WITH_RB_M
OD_SWITCH,
CMP_UU_VOI
P_UP_PROC_
AS_NORMAL_
PS_SWITCH,
CMP_UU_FDP
CH_COMPAT_
SWITCH,
CMP_UU_AM
R_DRD_HHO_
COMPAT_SWI
TCH,
CMP_IU_QOS
_ASYMMETR
Y_IND_COMP
AT_SWITCH,
76
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CMP_F2P_PR
OCESS_OPTI
MIZATION_S
WITCH,
CMP_UU_IOS
_CELL_SYNC
_INFO_REPOR
T_SWITCH,
CMP_UU_INT
RA_FREQ_MC
_BESTCELL_C
IO_SWITCH,
CMP_UU_SIB1
1_SIB12_WIT
H_1A1D_SWIT
CH,
CMP_F2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_D2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_RAB_5_
CFG_ROHC_S
WITCH,
CMP_RAB_6_
CFG_ROHC_S
WITCH,
CMP_RAB_7_
CFG_ROHC_S
WITCH,
CMP_RAB_8_
CFG_ROHC_S
WITCH,
CMP_RAB_9_
CFG_ROHC_S
WITCH,
CMP_HSUPA_
MACD_FLOW
_MUL_SWITC
H,
CMP_SMLC_R
SLT_MODE_T
YPE_SWITCH
Unit:None
77
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:CMP_IU
_IMS_PROC_A
S_NORMAL_P
S_SWITCH,
CMP_IU_QOS
_ASYMMETR
Y_IND_COMP
AT_SWITCH,
CMP_IU_SYS
HOIN_CMP_I
UUP_FIXTO1_
SWITCH,
CMP_IUR_H2
D_FOR_LOWR
5_NRNCCELL
_SWITCH,
CMP_IUR_SH
O_DIVCTRL_S
WITCH,
CMP_UU_ADJ
ACENT_FREQ
_CM_SWITCH
,
CMP_UU_AM
R_DRD_HHO_
COMPAT_SWI
TCH,
CMP_UU_AM
R_SID_MUST_
CFG_SWITCH,
CMP_UU_FDP
CH_COMPAT_
SWITCH,
CMP_UU_IGN
ORE_UE_RLC
_CAP_SWITC
H,
CMP_UU_INT
RA_FREQ_MC
_BESTCELL_C
IO_SWITCH,
CMP_UU_IOS
_CELL_SYNC
_INFO_REPOR
T_SWITCH,
CMP_UU_SER
V_CELL_CHG
78
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
_WITH_ASU_
SWITCH,
CMP_UU_SER
V_CELL_CHG
_WITH_RB_M
OD_SWITCH,
CMP_UU_VOI
P_UP_PROC_
AS_NORMAL_
PS_SWITCH,
CMP_F2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_D2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_RAB_5_
CFG_ROHC_S
WITCH,
CMP_RAB_6_
CFG_ROHC_S
WITCH,
CMP_RAB_7_
CFG_ROHC_S
WITCH,
CMP_RAB_8_
CFG_ROHC_S
WITCH,
CMP_RAB_9_
CFG_ROHC_S
WITCH,
CMP_HSUPA_
MACD_FLOW
_MUL_SWITC
H,
CMP_SMLC_R
SLT_MODE_T
YPE_SWITCH,
CMP_F2P_PR
OCESS_OPTI
MIZATION_S
WITCH,
CMP_UU_SIB1
1_SIB12_WIT
H_1A1D_SWIT
CH
79
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Default
Value:CMP_IU
_IMS_PROC_A
S_NORMAL_P
S_SWITCH:
0,CMP_IU_QO
S_ASYMMET
RY_IND_COM
PAT_SWITCH:
0,CMP_IU_SY
SHOIN_CMP_I
UUP_FIXTO1_
SWITCH:
0,CMP_IUR_H
2D_FOR_LOW
R5_NRNCCEL
L_SWITCH:
0,CMP_IUR_S
HO_DIVCTRL
_SWITCH:
0,CMP_UU_A
DJACENT_FR
EQ_CM_SWIT
CH:
0,CMP_UU_A
MR_DRD_HH
O_COMPAT_S
WITCH:
1,CMP_UU_A
MR_SID_MUS
T_CFG_SWIT
CH:
0,CMP_UU_FD
PCH_COMPAT
_SWITCH:
0,CMP_UU_IG
NORE_UE_RL
C_CAP_SWIT
CH:
1,CMP_UU_IN
TRA_FREQ_M
C_BESTCELL_
CIO_SWITCH:
0,CMP_UU_IO
S_CELL_SYN
C_INFO_REPO
RT_SWITCH:
0,CMP_UU_SE
80
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
RV_CELL_CH
G_WITH_ASU
_SWITCH:
0,CMP_UU_SE
RV_CELL_CH
G_WITH_RB_
MOD_SWITC
H:
1,CMP_UU_V
OIP_UP_PROC
_AS_NORMAL
_PS_SWITCH:
1,CMP_F2F_R
LC_ONESIDE_
REBUILD_SW
ITCH:
0,CMP_D2F_R
LC_ONESIDE_
REBUILD_SW
ITCH:
0,CMP_RAB_5
_CFG_ROHC_
SWITCH:
0,CMP_RAB_6
_CFG_ROHC_
SWITCH:
0,CMP_RAB_7
_CFG_ROHC_
SWITCH:
0,CMP_RAB_8
_CFG_ROHC_
SWITCH:
0,CMP_RAB_9
_CFG_ROHC_
SWITCH:
0,CMP_HSUP
A_MACD_FLO
W_MUL_SWIT
CH:
0,CMP_SMLC_
RSLT_MODE_
TYPE_SWITC
H:
0,CMP_F2P_P
ROCESS_OPTI
MIZATION_S
WITCH:
0,CMP_UU_SI
81
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
B11_SIB12_WI
TH_1A1D_SWI
TCH:0
82
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
CmpSwitch
BSC6910
SET
UCORRMALG
OSWITCH
WRFD-010610
06
HSDPA
Mobility
Management
Meaning:1.
CMP_IU_IMS_
PROC_AS_NO
RMAL_PS_SW
ITCH: When the
switch is on, the
IMS signaling
assigned by the
CN undergoes
compatibility
processing as an
ordinary PS
service. When
the switch is not
on, no special
processing is
performed. 2.
CMP_IU_QOS
_ASYMMETR
Y_IND_COMP
AT_SWITCH:
When the Iu
QoS
Negotiation
function is
active and the
switch is on, IE
RAB
Asymmetry
Indicator is
Symmetric
bidirectional,
The uplink and
downlink RNC
negotiation rate
is asymmetric,
"RNC" select
the bigger rate as
Iu QoS
negotiation rate.
When the switch
is OFF, "RNC"
select the less
rate as Iu QoS
negotiation rate.
3.
CMP_IU_SYS
HOIN_CMP_I
WRFD-020203
WRFD-020202
WRFD-150209
WRFD-150227
WRFD-021200
DB-HSDPA
WRFD-150223
DB-HSDPA
+MIMO
WRFD-010696
WRFD-010202
WRFD-010612
04
WRFD-140204
WRFD-150250
HCS
(Hierarchical
Cell Structure)
MC-HSDPA
+MIMO
DC-HSDPA
UE State in
Connected
Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH)
HSUPA
Mobility
Management
DC-HSUPA
3C-HSDPA
83
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
UUP_FIXTO1_
SWITCH:
When the switch
is on, the IUUP
version can be
rolled back to
R99 when
complete
configurations
are applied
during interRAT handover.
4.
CMP_IUR_H2
D_FOR_LOWR
5_NRNCCELL
_SWITCH:
When the switch
is on, H2D is
performed
before a
neighboring
RNC cell whose
version is earlier
than R5 is added
to the active set;
E2D is
performed
before a
neighboring
RNC cell whose
version is earlier
than R6 is added
to the active set.
If the DRNC is
of a version
earlier than R5,
DL services
cannot be
mapped on the
HS-DSCH. If
the DRNC is of a
version earlier
than R6, DL
services cannot
be mapped on
the HS-EDCH.
5.
84
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CMP_IUR_SH
O_DIVCTRL_S
WITCH: When
the switch is on,
the diversity
combination
over the Iur
interface is
configured on
the basis of that
of the local
RNC. When the
switch is not on,
the diversity
combination
over the Iur
interface is
configured on
the basis of
services. The
flag of diversity
combination
over the Iur
interface can be
set to MUST (for
BE services) or
MAY (for other
services). 6.
CMP_UU_ADJ
ACENT_FREQ
_CM_SWITCH
: Whether the
RNC activates
the compressed
mode before
initiating an
inter-frequency
measurement on
a DC-HSDPA or
DB-HSDPA
UE. When this
parameter is set
to ON, the RNC
initiates the
inter-frequency
measurement
without
activating the
85
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
compressed
mode if both the
UE and
EARFCN
support the noncompressed
inter-frequency
measurement.
When this
parameter is set
to OFF, the RNC
activates the
compressed
mode before
initiating the
inter-frequency
measurement.
This switch
takes effect only
in non-flexible
DC cells and DB
cells. 7.
CMP_UU_AM
R_DRD_HHO_
COMPAT_SWI
TCH: This
parameter
specifies to
enable AMR
through DRD
two-step
procedure
function. When
SRB is set up on
DCH, and
"RNC" decides
to setup the
AMR through
DRD procedure,
When the switch
is enabled,
"RNC" will
execute blind
handover to the
target cell, and
then setup the
AMR RBs on
the target cell,
86
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
When the switch
is disabled,
"RNC" will
setup the AMR
RBs on the
target cell
directly. 8.
CMP_UU_AM
R_SID_MUST_
CFG_SWITCH:
For narrowband
AMR services,
when the switch
is on, the SID
frame is always
configured;
when the switch
is not on, the
SID frame is
configured on
the basis of CN
assignment. 9.
CMP_UU_FDP
CH_COMPAT_
SWITCH:
When the switch
is OFF, if the
information
element that
indicates the FDPCH
capability of UE
exists in the
message
"RRC_CONNE
CT_REQ" or
"RRC_CONNE
CT_SETUP_C
MP", the FDPCH
capability
depends on that
indicator. In
other case, it
means UE does
not support FDPCH. When
the switch is
87
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
ON, if the
information
element that
indicates the FDPCH
capability of UE
exists in the
message
"RRC_CONNE
CT_REQ" or
"RRC_CONNE
CT_SETUP_C
MP", the FDPCH
capability
depends on that
indicator. If that
information
element does not
exist, UE
supports FDPCH when all
the conditions
meets: a) the
version of UE is
Release 6. b) UE
supports HSPDSCH. 10.
CMP_UU_IGN
ORE_UE_RLC
_CAP_SWITC
H: When the
switch is on, the
RAB
assignment
request and the
subsequent RB
setup procedure
proceed if the
RLC AM
capabilities of
the UE fail to
meet the
minimum RLC
TX/RX window
buffer
requirement of
the RAB to be
88
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
setup. When the
switch is not on,
the RAB
assignment
request is
rejected. 11.
CMP_UU_INT
RA_FREQ_MC
_BESTCELL_C
IO_SWITCH:
When this
switch is on, the
cell individual
offset (CIO) of
the best cell is
always set to 0 in
the INTRAFREQUENCY
MEASUREME
NT CONTROL
messages.
Otherwise, the
CIO information
of the best cell is
not carried in the
INTRAFREQUENCY
MEASUREME
NT CONTROL
messages. 12.
CMP_UU_IOS
_CELL_SYNC
_INFO_REPOR
T_SWITCH:
When the switch
is on, the cell
synchronization
information
traced by the
IOS need to be
reported during
the RRC
measurement
period. 13.
CMP_UU_SER
V_CELL_CHG
_WITH_ASU_
SWITCH:
89
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
When the switch
is on, the active
set update is in
the same
procedure as the
change of the
serving cell.
When the switch
is not on, the
serving cell is
changed after
the UE updates
the active set and
delivers
reconfiguration
of physical
channels. This
switch is
applicable only
to R6 or
aboveUEs. 14.
CMP_UU_SER
V_CELL_CHG
_WITH_RB_M
OD_SWITCH:
When the switch
is on, channel
transition is in
the same
procedure as the
change of the
serving cell.
When the switch
is not on, the
serving cell is
changed after
the UE performs
channel
transition and
delivers
reconfiguration
of physical
channels. 15.
CMP_UU_VOI
P_UP_PROC_
AS_NORMAL_
PS_SWITCH:
By default, the
90
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
switch is on. In
this case, the
Alternative Ebit is not
configured for
L2. 16.
CMP_F2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH: When the
switch is set to
ON, only uplink
RLC or
downlink RLC
can be reestablished
during the state
transition from
CELL_FACH to
CELL_FACH
(F2F for short).
17.
CMP_D2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH: When the
switch is set to
ON, only uplink
RLC or
downlink RLC
can be reestablished
during the state
transition from
CELL_DCH to
CELL_FACH
(D2F for short).
18.
CMP_RAB_5_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 5 can be
configured with
the Robust
Header
91
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Compression
(ROHC)
function. When
the switch is set
to OFF, the
service with
RAB ID 5
cannot be
configured with
the ROHC
function. 19.
CMP_RAB_6_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 6 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 6
cannot be
configured with
the ROHC
function. 20.
CMP_RAB_7_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 7 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 7
cannot be
configured with
the ROHC
function. 21.
CMP_RAB_8_
92
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 8 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 8
cannot be
configured with
the ROHC
function. 22.
CMP_RAB_9_
CFG_ROHC_S
WITCH: When
the switch is set
to ON, the
service with
RAB ID 9 can be
configured with
the ROHC
function. When
the switch is set
to OFF, the
service with
RAB ID 9
cannot be
configured with
the ROHC
function. 23.
CMP_HSUPA_
MACD_FLOW
_MUL_SWITC
H: When the
switch is set to
ON, MAC-d
flow can be
multiplexed
without any
restrictions.
When the switch
is set to OFF,
only MAC-d
93
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
flows whose
scheduling
priority is lower
than that of the
current MAC-d
flow can be
multiplexed. 24.
CMP_SMLC_R
SLT_MODE_T
YPE_SWITCH:
If the Client
Type of a
positioning
request is Value
Added Service
or Lawful
Intercept Client,
the positioning
result is reported
by using the
Ellipsoid Arc
type. For other
client types, the
positioning
result is reported
by using the
Ellipsoid point
with uncertainty
circle type. 25.
CMP_F2P_PR
OCESS_OPTI
MIZATION_S
WITCH: Switch
for optimizing
the procedure
for the
CELL_FACHto-CELL_PCHor-URA_PCH
state transition.
When this
switch is set to
on, F2P state
transition is
performed
through the
physical channel
reconfiguration
94
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
procedure.Whe
n this switch is
set to off, F2P
state transition is
performed
through the RB
reconfiguration
procedure. 26.
CMP_UU_SIB1
1_SIB12_WIT
H_1A1D_SWIT
CH: Whether to
carry parameters
related to events
1A and 1D in
system
information
block type 11
(SIB 11) and
SIB 12.If the
switch of
deferred
measurement
control reading
is turned on, the
UE cannot
promptly read
parameters
related to events
1A and 1D for
intra-frequency
neighboring
cells from SIB
11 or SIB12. As
a result, the UE
cannot perform
soft handovers
in advance. The
switch is set
using
DeferMcReadIn
d in the ADD/
MOD
UCELLMEAS
command.
GUI Value
Range:CMP_IU
95
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
_IMS_PROC_A
S_NORMAL_P
S_SWITCH,
CMP_IU_SYS
HOIN_CMP_I
UUP_FIXTO1_
SWITCH,
CMP_IUR_H2
D_FOR_LOWR
5_NRNCCELL
_SWITCH,
CMP_IUR_SH
O_DIVCTRL_S
WITCH,
CMP_UU_AM
R_SID_MUST_
CFG_SWITCH,
CMP_UU_ADJ
ACENT_FREQ
_CM_SWITCH
,
CMP_UU_IGN
ORE_UE_RLC
_CAP_SWITC
H,
CMP_UU_SER
V_CELL_CHG
_WITH_ASU_
SWITCH,
CMP_UU_SER
V_CELL_CHG
_WITH_RB_M
OD_SWITCH,
CMP_UU_VOI
P_UP_PROC_
AS_NORMAL_
PS_SWITCH,
CMP_UU_FDP
CH_COMPAT_
SWITCH,
CMP_UU_AM
R_DRD_HHO_
COMPAT_SWI
TCH,
CMP_IU_QOS
_ASYMMETR
Y_IND_COMP
AT_SWITCH,
96
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CMP_F2P_PR
OCESS_OPTI
MIZATION_S
WITCH,
CMP_UU_IOS
_CELL_SYNC
_INFO_REPOR
T_SWITCH,
CMP_UU_INT
RA_FREQ_MC
_BESTCELL_C
IO_SWITCH,
CMP_UU_SIB1
1_SIB12_WIT
H_1A1D_SWIT
CH,
CMP_F2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_D2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_RAB_5_
CFG_ROHC_S
WITCH,
CMP_RAB_6_
CFG_ROHC_S
WITCH,
CMP_RAB_7_
CFG_ROHC_S
WITCH,
CMP_RAB_8_
CFG_ROHC_S
WITCH,
CMP_RAB_9_
CFG_ROHC_S
WITCH,
CMP_HSUPA_
MACD_FLOW
_MUL_SWITC
H,
CMP_SMLC_R
SLT_MODE_T
YPE_SWITCH
Unit:None
97
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Actual Value
Range:CMP_IU
_IMS_PROC_A
S_NORMAL_P
S_SWITCH,
CMP_IU_QOS
_ASYMMETR
Y_IND_COMP
AT_SWITCH,
CMP_IU_SYS
HOIN_CMP_I
UUP_FIXTO1_
SWITCH,
CMP_IUR_H2
D_FOR_LOWR
5_NRNCCELL
_SWITCH,
CMP_IUR_SH
O_DIVCTRL_S
WITCH,
CMP_UU_ADJ
ACENT_FREQ
_CM_SWITCH
,
CMP_UU_AM
R_DRD_HHO_
COMPAT_SWI
TCH,
CMP_UU_AM
R_SID_MUST_
CFG_SWITCH,
CMP_UU_FDP
CH_COMPAT_
SWITCH,
CMP_UU_IGN
ORE_UE_RLC
_CAP_SWITC
H,
CMP_UU_INT
RA_FREQ_MC
_BESTCELL_C
IO_SWITCH,
CMP_UU_IOS
_CELL_SYNC
_INFO_REPOR
T_SWITCH,
CMP_UU_SER
V_CELL_CHG
98
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
_WITH_ASU_
SWITCH,
CMP_UU_SER
V_CELL_CHG
_WITH_RB_M
OD_SWITCH,
CMP_UU_VOI
P_UP_PROC_
AS_NORMAL_
PS_SWITCH,
CMP_F2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_D2F_RL
C_ONESIDE_R
EBUILD_SWIT
CH,
CMP_RAB_5_
CFG_ROHC_S
WITCH,
CMP_RAB_6_
CFG_ROHC_S
WITCH,
CMP_RAB_7_
CFG_ROHC_S
WITCH,
CMP_RAB_8_
CFG_ROHC_S
WITCH,
CMP_RAB_9_
CFG_ROHC_S
WITCH,
CMP_HSUPA_
MACD_FLOW
_MUL_SWITC
H,
CMP_SMLC_R
SLT_MODE_T
YPE_SWITCH,
CMP_F2P_PR
OCESS_OPTI
MIZATION_S
WITCH,
CMP_UU_SIB1
1_SIB12_WIT
H_1A1D_SWIT
CH
99
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Default
Value:CMP_IU
_IMS_PROC_A
S_NORMAL_P
S_SWITCH:
0,CMP_IU_QO
S_ASYMMET
RY_IND_COM
PAT_SWITCH:
0,CMP_IU_SY
SHOIN_CMP_I
UUP_FIXTO1_
SWITCH:
0,CMP_IUR_H
2D_FOR_LOW
R5_NRNCCEL
L_SWITCH:
0,CMP_IUR_S
HO_DIVCTRL
_SWITCH:
0,CMP_UU_A
DJACENT_FR
EQ_CM_SWIT
CH:
0,CMP_UU_A
MR_DRD_HH
O_COMPAT_S
WITCH:
1,CMP_UU_A
MR_SID_MUS
T_CFG_SWIT
CH:
0,CMP_UU_FD
PCH_COMPAT
_SWITCH:
0,CMP_UU_IG
NORE_UE_RL
C_CAP_SWIT
CH:
1,CMP_UU_IN
TRA_FREQ_M
C_BESTCELL_
CIO_SWITCH:
0,CMP_UU_IO
S_CELL_SYN
C_INFO_REPO
RT_SWITCH:
0,CMP_UU_SE
100
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
RV_CELL_CH
G_WITH_ASU
_SWITCH:
0,CMP_UU_SE
RV_CELL_CH
G_WITH_RB_
MOD_SWITC
H:
1,CMP_UU_V
OIP_UP_PROC
_AS_NORMAL
_PS_SWITCH:
1,CMP_F2F_R
LC_ONESIDE_
REBUILD_SW
ITCH:
0,CMP_D2F_R
LC_ONESIDE_
REBUILD_SW
ITCH:
0,CMP_RAB_5
_CFG_ROHC_
SWITCH:
0,CMP_RAB_6
_CFG_ROHC_
SWITCH:
0,CMP_RAB_7
_CFG_ROHC_
SWITCH:
0,CMP_RAB_8
_CFG_ROHC_
SWITCH:
0,CMP_RAB_9
_CFG_ROHC_
SWITCH:
0,CMP_HSUP
A_MACD_FLO
W_MUL_SWIT
CH:
0,CMP_SMLC_
RSLT_MODE_
TYPE_SWITC
H:
0,CMP_F2P_P
ROCESS_OPTI
MIZATION_S
WITCH:
0,CMP_UU_SI
101
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
B11_SIB12_WI
TH_1A1D_SWI
TCH:0
102
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ChannelRetryH
oTimerLen
BSC6900
SET
UCOIFTIMER
WRFD-010614
03
HSUPA 2ms
TTI
WRFD-021101
Dynamic
Channel
Configuration
Control (DCCC)
Meaning:This
parameter
specifies the
value of the
channel retry
handover timer.
When handover
is performed and
some higher
HSPA or HSPA
plus technique is
supported,
UTRAN will
trigger the
reconfiguration
for the higher
techniques.
Pingpang will
happen when the
reconfiguration
is triggered
immediately
when handover
succeeds,
because
handover
procedure is
frequently. In
order to avoid
the pingpang,
this timer will
start after
handover
procedure is
performed, and
the
reconfiguration
will not be
triggered until
the timer
expires.
WRFD-010685
WRFD-010652
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010614
04
WRFD-010683
WRFD-150209
WRFD-010636
WRFD-021200
Downlink
Enhanced L2
SRB over
HSDPA
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
HSUPA 2ms/
10ms TTI
Handover
Downlink
64QAM
DB-HSDPA
SRB over
HSUPA
HCS
(Hierarchical
Cell Structure)
GUI Value
Range:0~999
Unit:s
Actual Value
Range:0~999
103
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Default Value:2
104
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
ChannelRetryH
oTimerLen
BSC6910
SET
UCOIFTIMER
WRFD-010614
03
HSUPA 2ms
TTI
WRFD-021101
Dynamic
Channel
Configuration
Control (DCCC)
Meaning:This
parameter
specifies the
value of the
channel retry
handover timer.
When handover
is performed and
some higher
HSPA or HSPA
plus technique is
supported,
UTRAN will
trigger the
reconfiguration
for the higher
techniques.
Pingpang will
happen when the
reconfiguration
is triggered
immediately
when handover
succeeds,
because
handover
procedure is
frequently. In
order to avoid
the pingpang,
this timer will
start after
handover
procedure is
performed, and
the
reconfiguration
will not be
triggered until
the timer
expires.
WRFD-010685
WRFD-010652
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010614
04
WRFD-010683
WRFD-150209
WRFD-010636
WRFD-021200
Downlink
Enhanced L2
SRB over
HSDPA
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
HSUPA 2ms/
10ms TTI
Handover
Downlink
64QAM
DB-HSDPA
SRB over
HSUPA
HCS
(Hierarchical
Cell Structure)
GUI Value
Range:0~999
Unit:s
Actual Value
Range:0~999
105
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Default Value:2
McHsdpaUserNumThd
BSC6900
ADD
UCELLDYNS
HUTDOWN
MOD
UCELLDYNS
HUTDOWN
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-150208
WRFD-150250
Flexible Dual
Carrier HSDPA
WRFD-020117
3C-HSDPA
WRFD-010696
Multi-Carrier
Switch off
Based on Traffic
Load
WRFD-020122
DC-HSDPA
Multi-Carrier
Switch off
Based on QoS
Meaning:Thresh
old for the
number of
multi-carrier
HSDPA users in
a cell. If the
number of
multi-carrier
HSDPA users in
a cell is not
greater than the
threshold, the
RNC attempts to
automatically
close the cell.
GUI Value
Range:0~15
Unit:None
Actual Value
Range:0~15
Default Value:2
McHsdpaUserNumThd
BSC6910
ADD
UCELLDYNS
HUTDOWN
MOD
UCELLDYNS
HUTDOWN
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-150208
WRFD-150250
Flexible Dual
Carrier HSDPA
WRFD-020117
3C-HSDPA
WRFD-010696
Multi-Carrier
Switch off
Based on Traffic
Load
WRFD-020122
DC-HSDPA
Multi-Carrier
Switch off
Based on QoS
Meaning:Thresh
old for the
number of
multi-carrier
HSDPA users in
a cell. If the
number of
multi-carrier
HSDPA users in
a cell is not
greater than the
threshold, the
RNC attempts to
automatically
close the cell.
GUI Value
Range:0~15
Unit:None
Actual Value
Range:0~15
Default Value:2
106
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
CfgSwitch
BSC6900
SET
UCORRMALG
OSWITCH
WRFD-010699
DC-HSDPA
+MIMO
Meaning:Chann
el configuration
strategy switch
group. 1.
CFG_DC_MIM
O_DYNAMIC_
SELECT_SWIT
CH: When this
switch is turned
on, the RNC
determines
whether to
enable the DCHSDPA or
MIMO feature
for a newly
admitted user
based on the cell
load and the
number of
HSDPA users.
2.
CFG_DL_BLIN
D_DETECTIO
N_SWITCH:
When the switch
is on, the DL
blind transport
format detection
function is used
for single SRB
and AMR+SRB
bearers. Note
that the UE is
only required to
support the blind
transport format
stipulated in
3GPP 25.212
section 4.3.1. 3.
CFG_EDPCCH
_BOOSTING_S
WITCH: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 4.
WRFD-010693
WRFD-010694
WRFD-010697
WRFD-010696
WRFD-150250
WRFD-010101
WRFD-010510
WRFD-011500
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010683
WRFD-010615
02
WRFD-010615
03
DL 64QAM
+MIMO
UL 16QAM
E-DPCCH
Boosting
DC-HSDPA
3C-HSDPA
3GPP R9
Specifications
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
WRFD-010615
01
PDCP Header
Compression
(RFC2507)
WRFD-010615
04
CPC - DTX /
DRX
WRFD-150207
WRFD-150227
WRFD-020605
04
WRFD-150223
WRFD-150209
WRFD-010615
WRFD-010617
WRFD-020134
2x2 MIMO
Downlink
64QAM
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services
Combination of
Two PS
Services
Combination of
One CS Service
and Three PS
Services
107
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
4C-HSDPA
CFG_FREE_U
SER_SWITCH:
When this
switch is turned
on, special
handling for free
access user is
enabled. 5.
CFG_HSDPA_
64QAM_SWIT
CH: When the
switch is on,
64QAM can be
configured for
the HSDPA
service. 6.
CFG_HSDPA_
DCMIMO_SWI
TCH: When this
switch is turned
on, DC+MIMO
can be
configured for
the HSDPA
service. 7.
CFG_HSDPA_
DC_SWITCH:
When the switch
is on, DC can be
configured for
the HSDPA
service. 8.
CFG_HSDPA_
MIMO_SWITC
H: When the
switch is on,
MIMO can be
configured for
the HSDPA
service. 9.
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH: When the
switch is on and
the switches for
64QAM and
MIMO are on,
DB-HSDPA
+MIMO
Lossless SRNS
Relocation
MC-HSDPA
+MIMO
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
VoIP over
HSPA/HSPA+
Push to Talk
108
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
64QAM
+MIMO can be
configured for
the HSDPA
service 10.
CFG_HSDPA_
4C_MIMO_SW
ITCH: Whether
the 4C-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (4CHSDPA
+MIMO and
3C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 11.
CFG_HSDPA_
4C_SWITCH:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or
4C-HSDPA
feature is
allowed for
HSDPA
services. 12.
CFG_HSDPA_
DBMIMO_SWI
TCH: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA
109
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 13.
CFG_HSDPA_
DB_SWITCH:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services. 14.
CFG_HSPA_D
TX_DRX_SWI
TCH: When the
switch is on,
DTX_DRX can
be configured
for the HSPA
service. 15.
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH:
When the switch
is on, HS-SCCH
Less Operation
can be
configured for
the HSPA
service. 16.
CFG_HSUPA_
16QAM_SWIT
CH: When the
switch is on,
16QAM can be
configured for
the HSUPA
110
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
service. 17.
CFG_HSUPA_
DC_SWITCH:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 18.
CFG_IMS_SUP
PORT_SWITC
H: When the
switch is on and
the IMS license
is activated, the
RNC supports
IMS signaling.
19.
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH:
Whether the
UTRAN
supports the
function of
lossless RLC
PDU size
change. When
this switch is
turned on,
downlink
channel
reconfiguration
between the
DCH and HSDSCH does not
cause RLC PDU
size change
which results in
packet loss. This
function takes
effect only on
the UEs enabled
with this
function. For
111
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
details about this
function, see
3GPP TS
25.331. 20.
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH:
When the switch
is on and the UE
supports lossless
relocation, the
RNC configures
lossless
relocation for
PDCP
parameters if the
requirements of
RLC mode,
discard mode,
and sequential
submission are
met. Then,
lossless
relocation is
used for the UE.
21.
CFG_MULTI_
RAB_SWITCH
: When the
switch is on, the
RNC supports
multi-RABs
combinations
such as 2CS,
2CS+1PS, 1CS
+2PS, and 2PS.
22.
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH: When the
switch is on and
the PDCP
Header
compression
license is
activated, the
PDCP header
112
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
compression
algorithm for
IPv6 is used at
the RNC. 23.
CFG_PDCP_R
FC2507_HC_S
WITCH: When
the switch is on
and the PDCP
Header
compression
license is
activated, the
PDCP RFC2507
header
compression
algorithm is
used for the
RNC. 24.
CFG_PDCP_R
FC3095_HC_S
WITCH: When
the switch is on
and the PDCP
ROHC license is
activated, the
PDCP RFC3095
header
compression
algorithm is
used for the
RNC. 25.
CFG_PTT_SWI
TCH: When this
switch is on, the
RNC identifies
the PTT user
based on the
QoS attributes in
the RAB
assignment
request
message. Then,
the PTT users
are subject to
special
processing. 26.
CFG_RAB_RE
113
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
L_RMV_HSPA
PLUS_SWITC
H: When this
switch is on and
if an RAB
release is
performed, the
RNC decides
whether to fall
back a certain
HSPA(HSPA+)
feature based on
the requirement
of remaining
traffic carried by
the UE. That is,
if an HSPA+
feature is
required by the
previously
released RAB
connection but
is not required in
the initial bearer
policy of the
remaining
traffic, the RNC
falls back the
feature to save
the transmission
resources. The
HSPA+ features
that support the
fallback are
MIMO,
64QAM, MIMO
+64QAM, UL
16QAM, DCHSDPA, UL
TTI 2ms, and
DC-HSUPA.
27.
CFG_RCS_E_S
WITCH:
Indicates
whether to
enable the RCSe (Rich
114
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Communication
Suit enhanced)
service that
supports voice
services carried
in the CS
domain and
video services
carried in the PS
domain. When
this switch is
turned off, the
RCS-e service is
disabled. When
this switch is
turned on, the
RCS-e service is
enabled. 28.
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH:
Switch for AM
RLC
retransmission
parameters for
UEs in the
CELL_FACH
state.When this
switch is turned
on, the
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "SET
UFACHCFGPA
RA" command
are used for the
AM RLC
retransmission
parameters
specific to PS
services and
SRBs.When this
switch is turned
off, the
"TimerPoll" and
115
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to
SRBs. In
addition, the
"TimerPoll" and
"NoDiscardMax
DAT" in the
"ADD
UTYPRABRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to PS
services. 29.
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH:
Switch
controlling the
configuration
mode of AM
RLC SDU
retransmission
parameters for
UEs in the
CELL_DCH
state. When this
switch is turned
on and UEs in
the CELL_DCH
state, on the
RNC, the
transmitting side
of an AM RLC
entity uses the
values of the
116
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBDCH
RNCRLC" or
"MOD
UTYPSRBDCH
RNCRLC"
command for
SDU
retransmission.
When this
switch is turned
off or UEs not in
the CELL_DCH
state, on the
RNC, the
transmitting side
uses the values
of these
parameters in
the "ADD
UTYPSRBRLC
" or "MOD
UTYPSRBRLC
" command for
SDU
retransmission.
GUI Value
Range:CFG_DL
_BLIND_DETE
CTION_SWIT
CH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
MIMO_SWITC
H,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,
117
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R
FC3095_HC_S
WITCH,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_PTT_SWI
TCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_FREE_U
SER_SWITCH,
CFG_DC_MIM
O_DYNAMIC_
118
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
SELECT_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Unit:None
Actual Value
Range:CFG_D
C_MIMO_DY
NAMIC_SELE
CT_SWITCH,
CFG_DL_BLIN
D_DETECTIO
N_SWITCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_FREE_U
SER_SWITCH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSDPA_
119
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
MIMO_SWITC
H,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R
120
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
FC3095_HC_S
WITCH,
CFG_PTT_SWI
TCH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Default
Value:CFG_DC
_MIMO_DYN
AMIC_SELEC
T_SWITCH:
0,CFG_DL_BL
IND_DETECTI
ON_SWITCH:
1,CFG_EDPCC
H_BOOSTING
_SWITCH:
0,CFG_FREE_
USER_SWITC
H:
0,CFG_HSDPA
_64QAM_SWI
TCH:
1,CFG_HSDPA
_DCMIMO_S
WITCH:
0,CFG_HSDPA
_DC_SWITCH:
0,CFG_HSDPA
_MIMO_SWIT
CH:
1,CFG_HSDPA
_MIMO_WITH
_64QAM_SWI
TCH:
121
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
0,CFG_HSDPA
_4C_MIMO_S
WITCH:
0,CFG_HSDPA
_4C_SWITCH:
0,CFG_HSDPA
_DBMIMO_S
WITCH:
0,CFG_HSDPA
_DB_SWITCH:
0,CFG_HSPA_
DTX_DRX_S
WITCH:
0,CFG_HSPA_
HSSCCH_LES
S_OP_SWITC
H:
0,CFG_HSUPA
_16QAM_SWI
TCH:
0,CFG_HSUPA
_DC_SWITCH:
0,CFG_IMS_S
UPPORT_SWI
TCH:
1,CFG_LOSSL
ESS_DLRLC_P
DUSIZECHG_
SWITCH:
0,CFG_LOSSL
ESS_RELOC_
CFG_SWITCH:
0,CFG_MULTI
_RAB_SWITC
H:
1,CFG_PDCP_I
PV6_HEAD_C
OMPRESS_SW
ITCH:
0,CFG_PDCP_
RFC2507_HC_
SWITCH:
0,CFG_PDCP_
RFC3095_HC_
SWITCH:
0,CFG_PTT_S
WITCH:
0,CFG_RAB_R
122
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
EL_RMV_HSP
APLUS_SWIT
CH:
0,CFG_RCS_E
_SWITCH:
0,CFG_FACH_
AM_RLC_RET
RANSMIT_PA
RA_SWITCH:
0,CFG_DCH_S
RB_AM_RLC_
RETRANS_PA
RA_SWITCH:0
123
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
CfgSwitch
BSC6910
SET
UCORRMALG
OSWITCH
WRFD-010699
DC-HSDPA
+MIMO
Meaning:Chann
el configuration
strategy switch
group. 1.
CFG_DC_MIM
O_DYNAMIC_
SELECT_SWIT
CH: When this
switch is turned
on, the RNC
determines
whether to
enable the DCHSDPA or
MIMO feature
for a newly
admitted user
based on the cell
load and the
number of
HSDPA users.
2.
CFG_DL_BLIN
D_DETECTIO
N_SWITCH:
When the switch
is on, the DL
blind transport
format detection
function is used
for single SRB
and AMR+SRB
bearers. Note
that the UE is
only required to
support the blind
transport format
stipulated in
3GPP 25.212
section 4.3.1. 3.
CFG_EDPCCH
_BOOSTING_S
WITCH: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 4.
WRFD-010693
WRFD-010694
WRFD-010697
WRFD-010696
WRFD-150250
WRFD-010101
WRFD-010510
WRFD-011500
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010683
WRFD-010615
02
WRFD-010615
03
DL 64QAM
+MIMO
UL 16QAM
E-DPCCH
Boosting
DC-HSDPA
3C-HSDPA
3GPP R9
Specifications
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
WRFD-010615
01
PDCP Header
Compression
(RFC2507)
WRFD-010615
04
CPC - DTX /
DRX
WRFD-150207
WRFD-150227
WRFD-020605
04
WRFD-150223
WRFD-150209
WRFD-010615
WRFD-010617
WRFD-020134
2x2 MIMO
Downlink
64QAM
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services
Combination of
Two PS
Services
Combination of
One CS Service
and Three PS
Services
124
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
4C-HSDPA
CFG_FREE_U
SER_SWITCH:
When this
switch is turned
on, special
handling for free
access user is
enabled. 5.
CFG_HSDPA_
64QAM_SWIT
CH: When the
switch is on,
64QAM can be
configured for
the HSDPA
service. 6.
CFG_HSDPA_
DCMIMO_SWI
TCH: When this
switch is turned
on, DC+MIMO
can be
configured for
the HSDPA
service. 7.
CFG_HSDPA_
DC_SWITCH:
When the switch
is on, DC can be
configured for
the HSDPA
service. 8.
CFG_HSDPA_
MIMO_SWITC
H: When the
switch is on,
MIMO can be
configured for
the HSDPA
service. 9.
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH: When the
switch is on and
the switches for
64QAM and
MIMO are on,
DB-HSDPA
+MIMO
Lossless SRNS
Relocation
MC-HSDPA
+MIMO
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
VoIP over
HSPA/HSPA+
Push to Talk
125
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
64QAM
+MIMO can be
configured for
the HSDPA
service 10.
CFG_HSDPA_
4C_MIMO_SW
ITCH: Whether
the 4C-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (4CHSDPA
+MIMO and
3C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 11.
CFG_HSDPA_
4C_SWITCH:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or
4C-HSDPA
feature is
allowed for
HSDPA
services. 12.
CFG_HSDPA_
DBMIMO_SWI
TCH: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA
126
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 13.
CFG_HSDPA_
DB_SWITCH:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services. 14.
CFG_HSPA_D
TX_DRX_SWI
TCH: When the
switch is on,
DTX_DRX can
be configured
for the HSPA
service. 15.
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH:
When the switch
is on, HS-SCCH
Less Operation
can be
configured for
the HSPA
service. 16.
CFG_HSUPA_
16QAM_SWIT
CH: When the
switch is on,
16QAM can be
configured for
the HSUPA
127
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
service. 17.
CFG_HSUPA_
DC_SWITCH:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 18.
CFG_IMS_SUP
PORT_SWITC
H: When the
switch is on and
the IMS license
is activated, the
RNC supports
IMS signaling.
19.
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH:
Whether the
UTRAN
supports the
function of
lossless RLC
PDU size
change. When
this switch is
turned on,
downlink
channel
reconfiguration
between the
DCH and HSDSCH does not
cause RLC PDU
size change
which results in
packet loss. This
function takes
effect only on
the UEs enabled
with this
function. For
128
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
details about this
function, see
3GPP TS
25.331. 20.
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH:
When the switch
is on and the UE
supports lossless
relocation, the
RNC configures
lossless
relocation for
PDCP
parameters if the
requirements of
RLC mode,
discard mode,
and sequential
submission are
met. Then,
lossless
relocation is
used for the UE.
21.
CFG_MULTI_
RAB_SWITCH
: When the
switch is on, the
RNC supports
multi-RABs
combinations
such as 2CS,
2CS+1PS, 1CS
+2PS, and 2PS.
22.
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH: When the
switch is on and
the PDCP
Header
compression
license is
activated, the
PDCP header
129
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
compression
algorithm for
IPv6 is used at
the RNC. 23.
CFG_PDCP_R
FC2507_HC_S
WITCH: When
the switch is on
and the PDCP
Header
compression
license is
activated, the
PDCP RFC2507
header
compression
algorithm is
used for the
RNC. 24.
CFG_PDCP_R
FC3095_HC_S
WITCH: When
the switch is on
and the PDCP
ROHC license is
activated, the
PDCP RFC3095
header
compression
algorithm is
used for the
RNC. 25.
CFG_PTT_SWI
TCH: When this
switch is on, the
RNC identifies
the PTT user
based on the
QoS attributes in
the RAB
assignment
request
message. Then,
the PTT users
are subject to
special
processing. 26.
CFG_RAB_RE
130
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
L_RMV_HSPA
PLUS_SWITC
H: When this
switch is on and
if an RAB
release is
performed, the
RNC decides
whether to fall
back a certain
HSPA(HSPA+)
feature based on
the requirement
of remaining
traffic carried by
the UE. That is,
if an HSPA+
feature is
required by the
previously
released RAB
connection but
is not required in
the initial bearer
policy of the
remaining
traffic, the RNC
falls back the
feature to save
the transmission
resources. The
HSPA+ features
that support the
fallback are
MIMO,
64QAM, MIMO
+64QAM, UL
16QAM, DCHSDPA, UL
TTI 2ms, and
DC-HSUPA.
27.
CFG_RCS_E_S
WITCH:
Indicates
whether to
enable the RCSe (Rich
131
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Communication
Suit enhanced)
service that
supports voice
services carried
in the CS
domain and
video services
carried in the PS
domain. When
this switch is
turned off, the
RCS-e service is
disabled. When
this switch is
turned on, the
RCS-e service is
enabled. 28.
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH:
Switch for AM
RLC
retransmission
parameters for
UEs in the
CELL_FACH
state.When this
switch is turned
on, the
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "SET
UFACHCFGPA
RA" command
are used for the
AM RLC
retransmission
parameters
specific to PS
services and
SRBs.When this
switch is turned
off, the
"TimerPoll" and
132
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to
SRBs. In
addition, the
"TimerPoll" and
"NoDiscardMax
DAT" in the
"ADD
UTYPRABRLC
" command are
used for the AM
RLC
retransmission
parameters
specific to PS
services. 29.
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH:
Switch
controlling the
configuration
mode of AM
RLC SDU
retransmission
parameters for
UEs in the
CELL_DCH
state. When this
switch is turned
on and UEs in
the CELL_DCH
state, on the
RNC, the
transmitting side
of an AM RLC
entity uses the
values of the
133
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
"TimerPoll" and
"NoDiscardMax
DAT"
parameters in
the "ADD
UTYPSRBDCH
RNCRLC" or
"MOD
UTYPSRBDCH
RNCRLC"
command for
SDU
retransmission.
When this
switch is turned
off or UEs not in
the CELL_DCH
state, on the
RNC, the
transmitting side
uses the values
of these
parameters in
the "ADD
UTYPSRBRLC
" or "MOD
UTYPSRBRLC
" command for
SDU
retransmission.
GUI Value
Range:CFG_DL
_BLIND_DETE
CTION_SWIT
CH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
MIMO_SWITC
H,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,
134
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R
FC3095_HC_S
WITCH,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_PTT_SWI
TCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_FREE_U
SER_SWITCH,
CFG_DC_MIM
O_DYNAMIC_
135
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
SELECT_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Unit:None
Actual Value
Range:CFG_D
C_MIMO_DY
NAMIC_SELE
CT_SWITCH,
CFG_DL_BLIN
D_DETECTIO
N_SWITCH,
CFG_EDPCCH
_BOOSTING_S
WITCH,
CFG_FREE_U
SER_SWITCH,
CFG_HSDPA_
64QAM_SWIT
CH,
CFG_HSDPA_
DCMIMO_SWI
TCH,
CFG_HSDPA_
DC_SWITCH,
CFG_HSDPA_
136
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
MIMO_SWITC
H,
CFG_HSDPA_
MIMO_WITH_
64QAM_SWIT
CH,
CFG_HSDPA_
4C_MIMO_SW
ITCH,
CFG_HSDPA_
4C_SWITCH,
CFG_HSDPA_
DBMIMO_SWI
TCH,
CFG_HSDPA_
DB_SWITCH,
CFG_HSPA_D
TX_DRX_SWI
TCH,
CFG_HSPA_H
SSCCH_LESS_
OP_SWITCH,
CFG_HSUPA_
16QAM_SWIT
CH,
CFG_HSUPA_
DC_SWITCH,
CFG_IMS_SUP
PORT_SWITC
H,
CFG_LOSSLE
SS_DLRLC_P
DUSIZECHG_
SWITCH,
CFG_LOSSLE
SS_RELOC_CF
G_SWITCH,
CFG_MULTI_
RAB_SWITCH
,
CFG_PDCP_IP
V6_HEAD_CO
MPRESS_SWI
TCH,
CFG_PDCP_R
FC2507_HC_S
WITCH,
CFG_PDCP_R
137
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
FC3095_HC_S
WITCH,
CFG_PTT_SWI
TCH,
CFG_RAB_RE
L_RMV_HSPA
PLUS_SWITC
H,
CFG_RCS_E_S
WITCH,
CFG_FACH_A
M_RLC_RETR
ANSMIT_PAR
A_SWITCH,
CFG_DCH_SR
B_AM_RLC_R
ETRANS_PAR
A_SWITCH
Default
Value:CFG_DC
_MIMO_DYN
AMIC_SELEC
T_SWITCH:
0,CFG_DL_BL
IND_DETECTI
ON_SWITCH:
1,CFG_EDPCC
H_BOOSTING
_SWITCH:
0,CFG_FREE_
USER_SWITC
H:
0,CFG_HSDPA
_64QAM_SWI
TCH:
1,CFG_HSDPA
_DCMIMO_S
WITCH:
0,CFG_HSDPA
_DC_SWITCH:
0,CFG_HSDPA
_MIMO_SWIT
CH:
1,CFG_HSDPA
_MIMO_WITH
_64QAM_SWI
TCH:
138
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
0,CFG_HSDPA
_4C_MIMO_S
WITCH:
0,CFG_HSDPA
_4C_SWITCH:
0,CFG_HSDPA
_DBMIMO_S
WITCH:
0,CFG_HSDPA
_DB_SWITCH:
0,CFG_HSPA_
DTX_DRX_S
WITCH:
0,CFG_HSPA_
HSSCCH_LES
S_OP_SWITC
H:
0,CFG_HSUPA
_16QAM_SWI
TCH:
0,CFG_HSUPA
_DC_SWITCH:
0,CFG_IMS_S
UPPORT_SWI
TCH:
1,CFG_LOSSL
ESS_DLRLC_P
DUSIZECHG_
SWITCH:
0,CFG_LOSSL
ESS_RELOC_
CFG_SWITCH:
0,CFG_MULTI
_RAB_SWITC
H:
1,CFG_PDCP_I
PV6_HEAD_C
OMPRESS_SW
ITCH:
0,CFG_PDCP_
RFC2507_HC_
SWITCH:
0,CFG_PDCP_
RFC3095_HC_
SWITCH:
0,CFG_PTT_S
WITCH:
0,CFG_RAB_R
139
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
EL_RMV_HSP
APLUS_SWIT
CH:
0,CFG_RCS_E
_SWITCH:
0,CFG_FACH_
AM_RLC_RET
RANSMIT_PA
RA_SWITCH:
0,CFG_DCH_S
RB_AM_RLC_
RETRANS_PA
RA_SWITCH:0
140
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
HspaPlusSwitch
BSC6900
ADD
UCELLALGOS
WITCH
WRFD-010699
DC-HSDPA
+MIMO
Meaning:This
parameter is
used to select a
feature related to
HSPA+. If a
feature is
selected, it
indicates that the
corresponding
algorithm is
enabled. If a
feature is not
selected, it
indicates that the
corresponding
algorithm is
disabled. Note
that other factors
such as license
and the physical
capability of
NodeB restrict
whether a
feature can be
used even if this
feature is
selected. The
EFACH/MIMO
switch
determines
whether the cell
supports the EFACH/MIMO
feature but does
not affect the
establishment of
the E-FACH and
the MIMO cell.
1. 64QAM:
When the switch
is on, 64QAM
can be
configured for
the HSDPA
service. 2.
MIMO: When
the switch is on,
MIMO can be
MOD
UCELLALGOS
WITCH
WRFD-010401
WRFD-010504
WRFD-010693
WRFD-010695
WRFD-010694
WRFD-010697
WRFD-010696
Background
QoS Class
DL 64QAM
+MIMO
WRFD-010501
UL Layer 2
Improvement
WRFD-010615
01
UL 16QAM
WRFD-150250
E-DPCCH
Boosting
WRFD-010610
08
DC-HSDPA
WRFD-010612
06
WRFD-140204
WRFD-010609
01
WRFD-010609
03
WRFD-010609
02
Conversational
QoS Class
Combination of
Two PS
Services
3C-HSDPA
Interactive and
Background
Traffic Class on
HSDPA
WRFD-010609
Interactive and
Background
Traffic Class on
HSUPA
WRFD-010510
DC-HSUPA
WRFD-010688
Combination of
Two CS
Services
(Except for Two
AMR Speech
Services)
WRFD-010702
WRFD-010701
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010685
WRFD-010683
WRFD-021000
WRFD-010503
WRFD-010615
02
Issue Draft A (2014-01-20)
System
Information
Broadcasting
Combination of
Two CS
Services and
One PS Service
(Except for Two
AMR Speech
Services)
141
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
WRFD-010615
03
Combination of
One CS Service
and One PS
Service
configured for
the HSDPA
service.The
MIMO switch
determines
whether the cell
supports the
MIMO feature
but does not
affect the
establishment of
the the MIMO
cell. 3.
E_FACH: When
the switch is on,
E_FACH can be
configured for
the HSDPA
service.The
E_FACH switch
determines
whether the cell
supports the
E_FACH
feature but does
not affect the
establishment of
the the MIMO
cell. 4.
DTX_DRX:
When the switch
is on,
DTX_DRX can
be configured
for the HSPA
service. 5.
HS_SCCH_LE
SS_OPERATIO
N: When the
switch is on, HSSCCH Less
Operation can
be configured
for the HSPA
service. 6.
DL_L2ENHAN
CED: When the
switch is on,
WRFD-010502
WRFD-010615
04
WRFD-010615
05
WRFD-022000
WRFD-150207
WRFD-150227
WRFD-150208
WRFD-150223
WRFD-020900
WRFD-150209
WRFD-010615
WRFD-010632
WRFD-010630
Enhanced DRX
Uplink
Enhanced
CELL_FACH
Multiple RAB
Introduction
Package (PS
RAB < 2)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Downlink
Enhanced
CELL_FACH
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
Downlink
Enhanced L2
Downlink
64QAM
Transport
Channel
Management
Interactive QoS
Class
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services
142
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Streaming QoS
Class
DL_L2ENHAN
CED can be
configured for
the HSDPA
service. 7.
64QAM_MIM
O: When the
switch is on and
the switches for
64QAM and
MIMO are on,
64QAM
+MIMO can be
configured for
the HSDPA
service 8.
UL_16QAM:
When the switch
is on, 16QAM
can be
configured for
the HSUPA
service. 9.
DC_HSDPA:
When the switch
is on, DC can be
configured for
the HSDPA
service. 10.
UL_L2ENHAN
CED: When the
switch is on,
UL_L2ENHAN
CED can be
configured for
the HSUPA
service. 11.
EDPCCH_BOO
STING: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 12.
DCMIMO_HS
DPA: When this
switch is turned
on, DC+MIMO
Combination of
One CS Service
and Three PS
Services
Combination of
Four PS
Services
Physical
Channel
Management
4C-HSDPA
DB-HSDPA
+MIMO
Flexible Dual
Carrier HSDPA
MC-HSDPA
+MIMO
Logical Channel
Management
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
Streaming
Traffic Class on
HSUPA
Streaming
Traffic Class on
HSDPA
143
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
can be
configured for
the HSDPA
service. 13.
E_DRX: When
the switch is on,
E_DRX can be
configured for
the HSUPA
service. 14.
DC_HSUPA:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 15.
HSDPA_4C_M
IMO: Whether
the MC-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (3CHSDPA
+MIMO and
4C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 16.
HSDPA_4C:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or
144
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
4C-HSDPA
feature is
allowed for
HSDPA
services. 17.
DBMIMO_HS
DPA: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 18.
DB_HSDPA:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services.
GUI Value
Range:64QAM
(Cell 64QAM
Function
Switch), MIMO
(Cell MIMO
Function
Switch),
E_FACH(Cell
E_FACH
Function
Switch),
DTX_DRX
(Cell
145
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
DTX_DRX
Function
Switch),
HS_SCCH_LE
SS_OPERATIO
N(Cell
HS_SCCH
LESS
OPERATION
Function
Switch),
DL_L2ENHAN
CED(Cell DL
L2ENHANCED
Function
Switch),
64QAM_MIM
O(Cell 64QAM
+MIMO
Function
Switch),
UL_16QAM
(Cell UL
16QAM
Function
Switch),
DC_HSDPA
(Cell DCHSDPA
Function
Switch),
UL_L2ENHAN
CED(Cell UL
L2ENHANCED
Function
Switch),
EDPCCH_BOO
STING(Cell EDPCCH
Boosting
Function
Switch),
DCMIMO_HS
DPA(Cell DCHSDPA
Combined with
MIMO Function
Switch),
146
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
E_DRX
(Enhanced
Discontinuous
Reception
Function
Switch),
DC_HSUPA
(Cell DCHSUPA
Function
Switch),
HSDPA_4C_M
IMO(4CHSDPA
+MIMO
Function
Switch),
HSDPA_4C
(4C-HSDPA
Function
Switch),
DBMIMO_HS
DPA(DBHSDPA
+MIMO
Function
Switch),
DB_HSDPA
(DB-HSDPA
Function
Switch)
Unit:None
Actual Value
Range:64QAM,
MIMO,
E_FACH,
DTX_DRX,
HS_SCCH_LE
SS_OPERATIO
N,
DL_L2ENHAN
CED,
64QAM_MIM
O, UL_16QAM,
DC_HSDPA,
UL_L2ENHAN
CED,
147
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
EDPCCH_BOO
STING,
DCMIMO_HS
DPA, E_DRX,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
DPA,
DB_HSDPA
Default Value:
64QAM:
0,MIMO:
0,E_FACH:
0,DTX_DRX:
0,HS_SCCH_L
ESS_OPERATI
ON:
0,DL_L2ENHA
NCED:
0,64QAM_MI
MO:
0,UL_16QAM:
0,DC_HSDPA:
0,UL_L2ENHA
NCED:
0,EDPCCH_BO
OSTING:
0,DCMIMO_H
SDPA:
0,E_DRX:
0,DC_HSUPA:
0,HSDPA_4C_
MIMO:
0,HSDPA_4C:
0,DBMIMO_H
SDPA:
0,DB_HSDPA:
0
148
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
HspaPlusSwitch
BSC6910
ADD
UCELLALGOS
WITCH
WRFD-010699
DC-HSDPA
+MIMO
Meaning:This
parameter is
used to select a
feature related to
HSPA+. If a
feature is
selected, it
indicates that the
corresponding
algorithm is
enabled. If a
feature is not
selected, it
indicates that the
corresponding
algorithm is
disabled. Note
that other factors
such as license
and the physical
capability of
NodeB restrict
whether a
feature can be
used even if this
feature is
selected. The
EFACH/MIMO
switch
determines
whether the cell
supports the EFACH/MIMO
feature but does
not affect the
establishment of
the E-FACH and
the MIMO cell.
1. 64QAM:
When the switch
is on, 64QAM
can be
configured for
the HSDPA
service. 2.
MIMO: When
the switch is on,
MIMO can be
MOD
UCELLALGOS
WITCH
WRFD-010401
WRFD-010504
WRFD-010693
WRFD-010695
WRFD-010694
WRFD-010697
WRFD-010696
Background
QoS Class
DL 64QAM
+MIMO
WRFD-010501
UL Layer 2
Improvement
WRFD-010615
01
UL 16QAM
WRFD-150250
E-DPCCH
Boosting
WRFD-010610
08
DC-HSDPA
WRFD-010612
06
WRFD-140204
WRFD-010609
01
WRFD-010609
03
WRFD-010609
02
Conversational
QoS Class
Combination of
Two PS
Services
3C-HSDPA
Interactive and
Background
Traffic Class on
HSDPA
WRFD-010609
Interactive and
Background
Traffic Class on
HSUPA
WRFD-010510
DC-HSUPA
WRFD-010688
Combination of
Two CS
Services
(Except for Two
AMR Speech
Services)
WRFD-010702
WRFD-010701
WRFD-010686
WRFD-010687
WRFD-010684
WRFD-010685
WRFD-010683
WRFD-021000
WRFD-010503
WRFD-010615
02
Issue Draft A (2014-01-20)
System
Information
Broadcasting
Combination of
Two CS
Services and
One PS Service
(Except for Two
AMR Speech
Services)
149
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
WRFD-010615
03
Combination of
One CS Service
and One PS
Service
configured for
the HSDPA
service.The
MIMO switch
determines
whether the cell
supports the
MIMO feature
but does not
affect the
establishment of
the the MIMO
cell. 3.
E_FACH: When
the switch is on,
E_FACH can be
configured for
the HSDPA
service.The
E_FACH switch
determines
whether the cell
supports the
E_FACH
feature but does
not affect the
establishment of
the the MIMO
cell. 4.
DTX_DRX:
When the switch
is on,
DTX_DRX can
be configured
for the HSPA
service. 5.
HS_SCCH_LE
SS_OPERATIO
N: When the
switch is on, HSSCCH Less
Operation can
be configured
for the HSPA
service. 6.
DL_L2ENHAN
CED: When the
switch is on,
WRFD-010502
WRFD-010615
04
WRFD-010615
05
WRFD-022000
WRFD-150207
WRFD-150227
WRFD-150208
WRFD-150223
WRFD-020900
WRFD-150209
WRFD-010615
WRFD-010632
WRFD-010630
Enhanced DRX
Uplink
Enhanced
CELL_FACH
Multiple RAB
Introduction
Package (PS
RAB < 2)
3.4/6.8/13.6/27.
2Kbps RRC
Connection and
Radio Access
Bearer
Establishment
and Release
Downlink
Enhanced
CELL_FACH
CPC - DTX /
DRX
CPC - HSSCCH less
operation
2x2 MIMO
Downlink
Enhanced L2
Downlink
64QAM
Transport
Channel
Management
Interactive QoS
Class
Combination of
One CS Service
and Two PS
Services
Combination of
Three PS
Services
150
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
Streaming QoS
Class
DL_L2ENHAN
CED can be
configured for
the HSDPA
service. 7.
64QAM_MIM
O: When the
switch is on and
the switches for
64QAM and
MIMO are on,
64QAM
+MIMO can be
configured for
the HSDPA
service 8.
UL_16QAM:
When the switch
is on, 16QAM
can be
configured for
the HSUPA
service. 9.
DC_HSDPA:
When the switch
is on, DC can be
configured for
the HSDPA
service. 10.
UL_L2ENHAN
CED: When the
switch is on,
UL_L2ENHAN
CED can be
configured for
the HSUPA
service. 11.
EDPCCH_BOO
STING: When
the switch is on,
Boosting can be
configured for
the HSUPA
service. 12.
DCMIMO_HS
DPA: When this
switch is turned
on, DC+MIMO
Combination of
One CS Service
and Three PS
Services
Combination of
Four PS
Services
Physical
Channel
Management
4C-HSDPA
DB-HSDPA
+MIMO
Flexible Dual
Carrier HSDPA
MC-HSDPA
+MIMO
Logical Channel
Management
DB-HSDPA
Multiple RAB
Package(PS
RAB >= 2)
Streaming
Traffic Class on
HSUPA
Streaming
Traffic Class on
HSDPA
151
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
can be
configured for
the HSDPA
service. 13.
E_DRX: When
the switch is on,
E_DRX can be
configured for
the HSUPA
service. 14.
DC_HSUPA:
When this
switch is turned
on, the DCHSUPA
function can be
enabled for
HSUPA
services. 15.
HSDPA_4C_M
IMO: Whether
the MC-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
MC-HSDPA
+MIMO (3CHSDPA
+MIMO and
4C-HSDPA
+MIMO)
feature is
allowed for
HSDPA
services. 16.
HSDPA_4C:
Whether the 3CHSDPA or 4CHSDPA feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
3C-HSDPA or
152
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
4C-HSDPA
feature is
allowed for
HSDPA
services. 17.
DBMIMO_HS
DPA: Whether
the DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
+MIMO feature
is allowed for
HSDPA
services. 18.
DB_HSDPA:
Whether the
DB-HSDPA
feature is
allowed for
HSDPA
services. When
this switch is
turned on, the
DB-HSDPA
feature is
allowed for
HSDPA
services.
GUI Value
Range:64QAM
(Cell 64QAM
Function
Switch), MIMO
(Cell MIMO
Function
Switch),
E_FACH(Cell
E_FACH
Function
Switch),
DTX_DRX
(Cell
153
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
DTX_DRX
Function
Switch),
HS_SCCH_LE
SS_OPERATIO
N(Cell
HS_SCCH
LESS
OPERATION
Function
Switch),
DL_L2ENHAN
CED(Cell DL
L2ENHANCED
Function
Switch),
64QAM_MIM
O(Cell 64QAM
+MIMO
Function
Switch),
UL_16QAM
(Cell UL
16QAM
Function
Switch),
DC_HSDPA
(Cell DCHSDPA
Function
Switch),
UL_L2ENHAN
CED(Cell UL
L2ENHANCED
Function
Switch),
EDPCCH_BOO
STING(Cell EDPCCH
Boosting
Function
Switch),
DCMIMO_HS
DPA(Cell DCHSDPA
Combined with
MIMO Function
Switch),
154
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
E_DRX
(Enhanced
Discontinuous
Reception
Function
Switch),
DC_HSUPA
(Cell DCHSUPA
Function
Switch),
HSDPA_4C_M
IMO(4CHSDPA
+MIMO
Function
Switch),
HSDPA_4C
(4C-HSDPA
Function
Switch),
DBMIMO_HS
DPA(DBHSDPA
+MIMO
Function
Switch),
DB_HSDPA
(DB-HSDPA
Function
Switch)
Unit:None
Actual Value
Range:64QAM,
MIMO,
E_FACH,
DTX_DRX,
HS_SCCH_LE
SS_OPERATIO
N,
DL_L2ENHAN
CED,
64QAM_MIM
O, UL_16QAM,
DC_HSDPA,
UL_L2ENHAN
CED,
155
WCDMA RAN
DB-HSDPA Feature Parameter Description
Parameter ID
NE
MML
Command
7 Parameters
Feature ID
Feature Name
Description
EDPCCH_BOO
STING,
DCMIMO_HS
DPA, E_DRX,
DC_HSUPA,
HSDPA_4C_M
IMO,
HSDPA_4C,
DBMIMO_HS
DPA,
DB_HSDPA
Default Value:
64QAM:
0,MIMO:
0,E_FACH:
0,DTX_DRX:
0,HS_SCCH_L
ESS_OPERATI
ON:
0,DL_L2ENHA
NCED:
0,64QAM_MI
MO:
0,UL_16QAM:
0,DC_HSDPA:
0,UL_L2ENHA
NCED:
0,EDPCCH_BO
OSTING:
0,DCMIMO_H
SDPA:
0,E_DRX:
0,DC_HSUPA:
0,HSDPA_4C_
MIMO:
0,HSDPA_4C:
0,DBMIMO_H
SDPA:
0,DB_HSDPA:
0
156
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
InterPlmnMultiCarrSwitch
BSC6900
SET
UOPERATORS
HARINGMOD
E
WRFD-150209
DB-HSDPA
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-010696
DC-HSDPA
Meaning:Wheth
er to allow
multi-carrier
HSDPA users
across different
PLMNs. When
this switch is set
to ON, multicarrier features
such as DCHSDPA, DBHSDPA, 3CHSDPA and 4CHSDPA can be
configured
across different
PLMNs.When
this switch is set
to OFF, multicarrier HSDPA
users are
allowed only if
the primary and
secondary
carriers belong
to the same
operator.
GUI Value
Range:NO
(NO), YES
(YES)
Unit:None
Actual Value
Range:NO, YES
Default
Value:YES
(YES)
157
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
InterPlmnMultiCarrSwitch
BSC6910
SET
UOPERATORS
HARINGMOD
E
WRFD-150209
DB-HSDPA
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-010696
DC-HSDPA
Meaning:Wheth
er to allow
multi-carrier
HSDPA users
across different
PLMNs. When
this switch is set
to ON, multicarrier features
such as DCHSDPA, DBHSDPA, 3CHSDPA and 4CHSDPA can be
configured
across different
PLMNs.When
this switch is set
to OFF, multicarrier HSDPA
users are
allowed only if
the primary and
secondary
carriers belong
to the same
operator.
GUI Value
Range:NO
(NO), YES
(YES)
Unit:None
Actual Value
Range:NO, YES
Default
Value:YES
(YES)
158
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
MULTICELLG
RPID
BTS3900,
BTS3900
WCDMA
ADD
NODEBMULTI
CELLGRP
None
None
Meaning:Uniqu
ely identifies a
multiple carrier
cell group.
ADD
NODEBMULTI
CELLGRPITE
M
GUI Value
Range:0~95
Unit:None
LST
NODEBMULTI
CELLGRP
Actual Value
Range:0~95
Default
Value:None
LST
NODEBMULTI
CELLGRPITE
M
RMV
NODEBMULTI
CELLGRP
RMV
NODEBMULTI
CELLGRPITE
M
MULTICELLG
RPTYPE
BTS3900,
BTS3900
WCDMA
ADD
NODEBMULTI
CELLGRP
LST
NODEBMULTI
CELLGRP
WRFD-010696
DC-HSDPA
WRFD-140204
DC-HSUPA
WRFD-150209
DB-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150250
3C-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-150223
WRFD-150227
WRFD-010699
MC-HSDPA
+MIMO
DB-HSDPA
+MIMO
DC-HSDPA
+MIMO
159
WCDMA RAN
DB-HSDPA Feature Parameter Description
7 Parameters
Parameter ID
NE
MML
Command
Feature ID
Feature Name
Description
HSDPADBMI
MO
BTS3900,
BTS3900
WCDMA
ADD
ULOCELL
WRFD-150227
DB-HSDPA
+MIMO
Meaning:Indicates whether
the DB-HSDPA
+MIMO feature
is supported by
the cell.
MOD
ULOCELL
LST ULOCELL
GUI Value
Range:FALSE
(FALSE),
TRUE(TRUE)
Unit:None
Actual Value
Range:FALSE,
TRUE
Default
Value:FALSE
(FALSE)
160
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counters
Counter Name
Counter
Description
NE
Feature ID
Feature Name
50332168
VS.DataOutput.
DBHSDPA.Tra
ffic
MAC-ehs traffic
volume of DBHSDPA/DBHSDPA
+MIMO users
NodeB
Multi-mode:
None
DB-HSDPA
GSM: None
UMTS:
WRFD-150209
LTE: None
50332173
50341702
VS.DBHSDPA.
DataTtiNum.Us
er
VS.HSDPA.DC
Cfg.SupCarrier
Deact.TimeRati
o
Total number of
user-level TTIs
within which
there is data to
transmit in DBHSDPA/DBHSDPA
+MIMO user
queue buffers
NodeB
The Ratio Of Dc
Deact
NodeB
Multi-mode:
None
GSM: None
UMTS:
WRFD-150209
LTE: None
Multi-mode:
None
GSM: None
UMTS:
WRFD-150209
WRFD-010713
WRFD-010699
LTE: None
DB-HSDPA
DB-HSDPA
Traffic-Based
Activation and
Deactivation of
the
Supplementary
Carrier In Multicarrier
DC-HSDPA
+MIMO
161
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425890
VS.HSDPA.MC
.SEC.UE.Mean.
Cell
Average
Number of 4CHSDPA/DBHSDPA/DCHSDPA UEs
Using This Cell
as the Secondary
Carrier Cell
BSC6900
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425893
73425896
VS.HSDPA.DB
.PRIM.UE.Mea
n.Cell
Average
Number of DBHSDPA UEs
Using This Cell
as the Primary
Carrier Cell
BSC6900
VS.HSDPA.MC
.MeanRequired
Pwr
Power Required
by 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6900
WRFD-150209
DB-HSDPA
WRFD-150227
DB-HSDPA
+MIMO
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
162
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425901
VS.HSDPA.MC
.MaxRequiredP
wr
Maximum
Power Required
by 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6900
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425903
VS.HSDPA.MC
.MinRequiredP
wr
Minimum
Power Required
by 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6900
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425905
VS.MeanTCP.H
SDPA.MC
Average DL
Transmit Power
of 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6900
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
163
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425910
VS.MaxTCP.H
SDPA.MC
Maximum DL
Transmit Power
of 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6900
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425912
VS.MinTCP.HS
DPA.MC
Minimum DL
Transmit Power
of 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6900
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425937
VS.HSDPA.RA
B.AbnormRel.D
B2P
Number of
Abnormal RAB
Releases for
Cell During
State Transition
of DB-HSDPA
UEs to CELL/
URA_PCH
BSC6900
WRFD-150209
DB-HSDPA
73425938
VS.HSDPA.RA
B.AbnormRel.D
BMIMO2P
Number of
Abnormal RAB
Releases for
Cell During
State Transition
of DB-HSDPA
+MIMO UEs to
CELL/
URA_PCH
BSC6900
WRFD-150227
DB-HSDPA
+MIMO
164
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425948
VS.HSDPA.RA
B.NormRel.DB.
All
Number of
Normal RAB
Releases of DBHSDPA UEs for
Cell (All
Scenarios)
BSC6900
WRFD-150209
DB-HSDPA
73425949
VS.HSDPA.RA
B.NormRel.DB
MIMO.All
Number of
Normal RAB
Releases of DBHSDPA
+MIMO UEs for
Cell (All
Scenarios)
BSC6900
WRFD-150227
DB-HSDPA
+MIMO
73426106
VS.HSDPA.RA
B.DBMIMO.At
tEstab
Number of RAB
Setup Attempts
for Cell When
DB-HSDPA
with MIMO
Applied
BSC6900
WRFD-150227
DB-HSDPA
+MIMO
73426107
VS.HSDPA.RA
B.DBMIMO.Su
ccEstab
Number of
Successful RAB
Setups for Cell
When DBHSDPA with
MIMO Applied
BSC6900
WRFD-150227
DB-HSDPA
+MIMO
73426108
VS.HSDPA.RA
B.AbnormRel.D
BMIMO
Number of
Abnormal
Released RABs
for Cell When
DB-HSDPA
with MIMO
Applied (RF
Exceptions
Considered)
BSC6900
WRFD-150227
DB-HSDPA
+MIMO
73426109
VS.HSDPA.RA
B.NormRel.DB
MIMO
Number of
Normally
Released RABs
for Cell When
DB-HSDPA
with MIMO
Applied
BSC6900
WRFD-150227
DB-HSDPA
+MIMO
165
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426114
VS.HSDPA.RA
B.DB.AttEstab
Number of RAB
Setup Attempts
for Cell When
DB-HSDPA
Applied
BSC6900
WRFD-150209
DB-HSDPA
73426115
VS.HSDPA.RA
B.DB.SuccEsta
b
Number of
Successful RAB
Setups for Cell
When DBHSDPA
Applied
BSC6900
WRFD-150209
DB-HSDPA
73426116
VS.HSDPA.RA
B.AbnormRel.D
B
Number of
Abnormally
Released RABs
for Cell When
DB-HSDPA
Applied (RF
Exceptions
Considered)
BSC6900
WRFD-150209
DB-HSDPA
73426117
VS.HSDPA.RA
B.NormRel.DB
Number of
Normally
Released RABs
for Cell When
DB-HSDPA
Applied
BSC6900
WRFD-150209
DB-HSDPA
73425890
VS.HSDPA.MC
.SEC.UE.Mean.
Cell
Average
Number of 4CHSDPA/DBHSDPA/DCHSDPA UEs
Using This Cell
as the Secondary
Carrier Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
166
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425893
VS.HSDPA.DB
.PRIM.UE.Mea
n.Cell
Average
Number of DBHSDPA UEs
Using This Cell
as the Primary
Carrier Cell
BSC6910
WRFD-150209
DB-HSDPA
WRFD-150227
DB-HSDPA
+MIMO
VS.HSDPA.MC
.MeanRequired
Pwr
Power Required
by 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
73425896
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425901
VS.HSDPA.MC
.MaxRequiredP
wr
Maximum
Power Required
by 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
167
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425903
VS.HSDPA.MC
.MinRequiredP
wr
Minimum
Power Required
by 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425905
VS.MeanTCP.H
SDPA.MC
Average DL
Transmit Power
of 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425910
VS.MaxTCP.H
SDPA.MC
Maximum DL
Transmit Power
of 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
168
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73425912
VS.MinTCP.HS
DPA.MC
Minimum DL
Transmit Power
of 4C-HSDPA/
DB-HSDPA/
DC-HSDPA
UEs for Cell
BSC6910
WRFD-150250
3C-HSDPA
WRFD-150207
4C-HSDPA
WRFD-150209
DB-HSDPA
WRFD-010696
DC-HSDPA
WRFD-150208
Flexible Dual
Carrier HSDPA
WRFD-010699
WRFD-150227
WRFD-150223
DC-HSDPA
+MIMO
DB-HSDPA
+MIMO
MC-HSDPA
+MIMO
73425937
VS.HSDPA.RA
B.AbnormRel.D
B2P
Number of
Abnormal RAB
Releases for
Cell During
State Transition
of DB-HSDPA
UEs to CELL/
URA_PCH
BSC6910
WRFD-150209
DB-HSDPA
73425938
VS.HSDPA.RA
B.AbnormRel.D
BMIMO2P
Number of
Abnormal RAB
Releases for
Cell During
State Transition
of DB-HSDPA
+MIMO UEs to
CELL/
URA_PCH
BSC6910
WRFD-150227
DB-HSDPA
+MIMO
73425948
VS.HSDPA.RA
B.NormRel.DB.
All
Number of
Normal RAB
Releases of DBHSDPA UEs for
Cell (All
Scenarios)
BSC6910
WRFD-150209
DB-HSDPA
73425949
VS.HSDPA.RA
B.NormRel.DB
MIMO.All
Number of
Normal RAB
Releases of DBHSDPA
+MIMO UEs for
Cell (All
Scenarios)
BSC6910
WRFD-150227
DB-HSDPA
+MIMO
169
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426106
VS.HSDPA.RA
B.DBMIMO.At
tEstab
Number of RAB
Setup Attempts
for Cell When
DB-HSDPA
with MIMO
Applied
BSC6910
WRFD-150227
DB-HSDPA
+MIMO
73426107
VS.HSDPA.RA
B.DBMIMO.Su
ccEstab
Number of
Successful RAB
Setups for Cell
When DBHSDPA with
MIMO Applied
BSC6910
WRFD-150227
DB-HSDPA
+MIMO
73426108
VS.HSDPA.RA
B.AbnormRel.D
BMIMO
Number of
Abnormal
Released RABs
for Cell When
DB-HSDPA
with MIMO
Applied (RF
Exceptions
Considered)
BSC6910
WRFD-150227
DB-HSDPA
+MIMO
73426109
VS.HSDPA.RA
B.NormRel.DB
MIMO
Number of
Normally
Released RABs
for Cell When
DB-HSDPA
with MIMO
Applied
BSC6910
WRFD-150227
DB-HSDPA
+MIMO
73426114
VS.HSDPA.RA
B.DB.AttEstab
Number of RAB
Setup Attempts
for Cell When
DB-HSDPA
Applied
BSC6910
WRFD-150209
DB-HSDPA
73426115
VS.HSDPA.RA
B.DB.SuccEsta
b
Number of
Successful RAB
Setups for Cell
When DBHSDPA
Applied
BSC6910
WRFD-150209
DB-HSDPA
170
WCDMA RAN
DB-HSDPA Feature Parameter Description
8 Counters
Counter ID
Counter Name
Counter
Description
NE
Feature ID
Feature Name
73426116
VS.HSDPA.RA
B.AbnormRel.D
B
Number of
Abnormally
Released RABs
for Cell When
DB-HSDPA
Applied (RF
Exceptions
Considered)
BSC6910
WRFD-150209
DB-HSDPA
73426117
VS.HSDPA.RA
B.NormRel.DB
Number of
Normally
Released RABs
for Cell When
DB-HSDPA
Applied
BSC6910
WRFD-150209
DB-HSDPA
171
WCDMA RAN
DB-HSDPA Feature Parameter Description
9 Glossary
Glossary
172
WCDMA RAN
DB-HSDPA Feature Parameter Description
10 Reference Documents
10
Reference Documents
1.
2.
3.
4.
5.
6.
7.
8.
9.
173