Professional Documents
Culture Documents
Design Inducer Pump
Design Inducer Pump
home
products
services
applications
about
support
news
Page 1 sur 2
webinars
Home Applications Applications Examples Design of an Inducer Pump with High Suction Performance and
Backflow Control
Design of an Inducer Pump with High Suction Performance and Backflow Control
The design of inducers is critical to achieving high suction performance in industrial pumps and rocket engine
Follow us:
turbopumps. However, the conventional design approach, based on blade angles, often causes unstable
pump operation. Instabilities such as strong inlet backflow and rotating cavitation in inducers may cause
applications
1/15
publications
Study of Turbopump In
Designed by 3-D Invers
Method
Fig.2: TURBOdesign1
Design Optimisation of
Pump Inducer
TURBOdesign1 was also applied in the design of the main impeller of an inducer
pump, see Figure 3.
Development of Cryoge
Hydrodynamics Using I
Design Method and CF
Improvements of Induc
Backflow Characteristic
Inverse Design Method
Fig.3
using TURBOdesign1 (Figure 5). The conventional helical type inducer has a
strong inlet backflow even at the design point, the presence of which is confirmed
by the photograph in Figure 6. This inlet backflow at the design point was
eliminated by optimizing the blade loading distribution using TURBOdesign1, see
Application of TURBOd
Compact Design of Roc
Turbopump - JAXA
Figure 7. The meridional geometry was also re-designed to achieve high loading.
Figures 8 and 10 show the streamlines at design point, the elimination of the inlet
backflow can be clearly seen.
Fig.4
Login or Register
Fig.5
Fig.6: Conventional
Fig.7: TURBOdesign1
The elimination of inlet backflow is important for assuring mechanical reliability, and avoiding deterioration of
the thermodynamic effects on suppressing cavitation of liquid hydrogen. Figures 9 and 11 show the FFT
analysis results of measured pressure fluctuation at the design point, and a cavitation number of = 0.04. In
the case of the inducer designed by TURBOdesign1, pressure oscillation was maintained at a very low level
and no evidence of rotating cavitation was observed.
Fig.8: Conventional
Fig.9: Conventional
Fig.10: TURBOdesign1
Fig.11: TURBOdesign1
References:
Ashihara, K. and Goto, A., 1999, Improvements of Pump Suction Performance using 3-D Inverse Design
Method, ASME FEDSM99-6846
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.
http://www.adtechnology.co.uk/applications/design-inducer-pump-suction-performance 01/07/2013
Design of an Inducer Pump with High Suction Performance and Backflow Control | ...
Page 2 sur 2
Ashihara, K. and Goto, A., 2002, Effects of Blade Loading on Pump Inducer Performance and Flow Fields,
ASME FEDSM 2002
Ashihara, K., Goto, A., Kamijo, K., Yamada, H., Hashimoto, and T., Uchiumi, M., 2001, Study on
Turbopump Inducers Designed by 3-D Inverse Design Method, AFI-2001, Zao, Japan.
ShareThis:
Advanced Design Technology Dilke House, 1 Malet Street, London WC1E 7JN United Kingdom
tel: +44 (0)20 7299 1170 fax: +44 (0)20 7636 8028 [email protected]
1998-2013 Advanced Design Technology Ltd - Disclaimer - Privacy Policy - Usage Terms and Conditions
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.
http://www.adtechnology.co.uk/applications/design-inducer-pump-suction-performance 01/07/2013