DSR 2016 (Vol.2) PDF
DSR 2016 (Vol.2) PDF
GOVERNMENT OF INDIA
dsUnzh; yksd fuekZ.k foHkkx
CENTRAL PUBLIC WORKS DEPARTMENT
fnYyh nj vuqlwph
Hkkx - 2
DELHI SCHEDULE OF RATES
(Vol. 2)
2016
ISBN : 978-81-932679-0-5
Also available at
All Leading Booksellers & Authorised Govt. Dealers In India
Price : Rs. 1200/- (for both volumes) excluding postage and forwarding charges etc.
Hkkjr ljdkj dsUnzh; yksd fuekZ.k foHkkx
Government of India fuekZ.k Hkou] ubZ fnYyh 110011
Central Public Works Department
DIVAKAR GARG Nirman Bhawan, New Delhi- 110011
Director General Tel : 23062556 / 1317, Fax : 23061884
E-Mail : [email protected]
FOREWORD
Delhi Schedule of Rates, being published by Central Public Works Department from time to time, is
a very comprehensive technical document and useful in execution of civil construction works. Apart
from C.P.W.D., this Schedule of Rates is used as a guide by many departments, institutions, public
sector undertakings, architects, builders, contractors, etc.
The Central Public Works Department Schedule of Rates was first published in the year 1931,
followed by a number of revisions/publications from time to time in order to bring it in line with the
prevailing technologies and market rates. The Delhi Schedule of Rates were revised many times in
the subsequent years viz 1977, 1981, 1985, 1989, 1993, 1997, 2002, 2007, 2010 (Reprint), 2012,
2013 & 2014.
Earlier Hindi version of DSR was being published separately, but considering the convenience and
mandate for use of Hindi, the present DSR has been made bilingual and covered in two volumes.
The prices of labour and materials have registered some changes since last publication. Besides the
cost, there has been spurt of new construction technologies and materials. This has necessitated
revision of existing DSR 2014 to include the above changes.
Although this DSR contains most of the items of DSR 2014, the nomenclature of existing items has
been reviewed & updated wherever found necessary. The items pertaining to new technology and
materials have been added in New Sub head 26 for use of field units and feedback on these items.
I wish to place on record the technical input and effective coordination on the part of Shri Abhai
Sinha, Spl. DG (HQ), Shri Balraj Chadha ADG (TD), Shri M.K. Sharma CE (CSQ)-(Civil) and the
efforts put in by Shri S.P. Chaudhary Director (Tech. & PR), Shri P.P. Singh SE (TAS) and his team
of officers in CSQ unit in finalizing the DSR-2016 in a short time.
I am sure that this Schedule of Rates 2016 will be quite useful to all concerned Engineers & Architects
in the Building construction industry in general and CPWD in particular.
1. Delhi Schedule of Rates-2016 includes the existing items of DSR 2014 with deletion of few obsolete
items, merger of similar items and addition of new items in line with emerging trends in construction
Industry.
2. DSR-2016 is based on the prevailing market rates of materials in Delhi as on 01.04.2016. The
labour rates adopted are as per minimum wages applicable w.e.f 01/04/2016 issued by Govt. of
Delhi/ Govt. of India, whichever is higher.
3. The cost index for DSR 2016 is 102 with reference to CPWD Plinth Area Rates 2012, having
base 100 as on 01/10/2012.
4. This DSR 2016 shall be read along with CPWD specifications 2009 Vol.-I & II with up to date
Correction Slips.
5.1.1 Sub-head Nos. 24, 25 & 26 of DSR-2014 have been re-numbered as 23, 24 & 25
respectively due to separate publication of DSR for Horticulture and Land Scaping.
5.1.2 New Sub- head No. 26 for New Technologies and Materials has been introduced.
5.1.3 The rates of basic materials incorporated in this DSR 2016 are considered for the
materials available in the market, conforming to BIS Standards/ CPWD Specifications.
5.1.4 The items relating to uPVC windows have been made composite & units of measurement
converted from metre to square metre with a number of possible combinations of window
profiles. Provision for tolerance to profiles sizes have been made to allow for innovations
and vendor variations.
6.0 Keeping in view amendments in IS: 383-2016, the use of manufactured aggregate (RCA & RA)
have been permitted in the Concrete and RCC work.
IV
Salient Modifications and Changes in Sub Heads:
7.1 Carriage of Materials: Item No. 1.1.18 for Disposal of moorum/ building rubbish/ malba/
similar unserviceable, dismantled or waste material by mechanical transport has been added.
7.2 Concrete Work: The items with FINE SAND have been deleted.
7.3 RCC Work: The items of 1:2:4 nominal concrete mix (M15) have been modified to 1:1 :3
nominal concrete mix (M20) due to changes in IS 456 in the minimum grade of concrete to M20
keeping in view durability consideration. However, the use of nominal mix in RCC work is to be
discouraged.
The item no. 5.29 for Non- asbestos cement bonded wood particle board 6 mm thick as per IS:
14276 for covering of expansion joints has been added.
7.4 Brick Work: The item No. 6.47 for Autoclaved Aerated Cement blocks masonry with polymer
modified adhesive mortar has been added.
7.5 Stone Work: Item No. 7.23.5 wall lining (veneer work) with Gang saw cut sand stone has been
added.
7.6 Marble Work: Item No. 8.13 for Polished Granite stone flooring has been added.
7.7 Wood Work: Item No. 8.13 for Cement bonded wood particle board as per IS:14276 has been
added.
Item Nos. 9.147.A to 9.147.F.4 for uPVC shutters having mode of measurement in square metre
have been added by replacing old item in running metre.
Item Nos. 9.161 to 9.165 (for 120 minutes fire rated) fire resistant door have been added.
7.8 Steel Work: Item Nos. 10.31 for angle iron frames for doors, windows for Maintenance Works
has been added.
7.9 Flooring: Items Nos. 11.37.A & 11.46. A for ceramic tiles for skirting and screen printed border
tile have been added.
7.10 Roofing: Item No. 12.26.2 for 6 mm thick Cement bonded wood particle board as per IS:14276
has been added.
7.11 Finishing: Item No. 13.86 for 6 mm plaster on cement concrete or reinforced cement concrete
work with white cement based polymer modified self curing mortar has been added.
7.12 Repairs to building: Item No. 14.75 for repair to plaster with white cement based polymer
modified self curing mortar has been added.
V
7.13 Road Work: Item No. 16.95 to 16.97 for Gabion structure with Mechanically Woven Double
Twisted Hexagonal Shaped Wire mesh Gabion Boxes have been added.
7.14 Sanitary Installation: Items pertaining to Hubless pipes as per IS:15905 ( 22 Nos.) vide Item
Nos 17.35.1.3 to 17.60.2.3 have been added.
Item No 17.81 pertaining to floor mounted double siphoned water closet have been added.
7.15 Water Proofing : Item No. 22.22 to 22.26 for waterproofing treatment have been added.
8.0 New Technologies and Materials
With a view to give boost to make in India initiative of the Government, a new sub Head has been
added for New Technologies and Materials. These new items are included for a period of two
years and then performance shall be reviewed. Following are items added under this sub head.
8.1 Phenol bonded Bamboo wood flooring, wall skirting, wall cladding. 25 mm and 30mm thick
panelled and panelled /glazed shutters for doors and windows and Bamboo wood frame.
8.2 50mm thick extruded polystyrene rigid insulation board for cavity wall and under deck insulation.
8.3 Relevant items for modular kitchen.
8.4 Items relating to Polypropylene Geogrid, Nonwoven Geotextile drainage composite and High
strength flexible Geogrids (HSFG) as soil reinforcement.
8.5 Items for Aluminium profile industrial troughed sheet roofing.
8.6 Security guard with and without gun.
8.7 P/F Densified calcium silicate false ceiling tiles, GRG false ceiling tiles and Mineral fiber false
ceiling tiles.
8.8 Repair and Rehabilitation 13 Nos. Items
8.9 New Technology items viz. Light Gauge Steel Framed Structure (LGSFS), Expanded Polystyrene
Core (EPS Core) wall panel and roof/floor panels and Customized Aluminum formwork for
monolithic construction.
8.10 While preparing the DSR, it is ensured that brand name, product of any particular company,
proprietary items does not find place in the nomenclature of the items. In case, any such item
having brand name/ manufactures name is noticed, it may be brought to the notice of Superintending
Engineer (TAS), CPWD, Nirman Bhawan, New Delhi for remedial action.
9.0 Lot of efforts have gone into the preparation of this Delhi Schedule of Rates 2016 (Bilingual). I
convey my deep appreciation and sincere thanks to Shri M. K. Sharma - CE(CSQ),
Shri S. P. Chaudhary - Director(Tech. & PR), Shri P. P. Singh - SE(TAS) and his team comprising
Shri R. B. Garg - EE(TAS-II), Shri K. R. Meena - EE(TAD), Shri Kunwar Chandresh - EE(e-
Gov.), Shri S. K. Srivastava - EE(QA), Shri D. K. Chaudhary - EE(QA),
VI
Shri D. S. Adhikari - AE(QA), Shri K. N. Singh - AE(TAS), Shri D. K. Malhotra - AE(TAS), Ms.
Anjana Reghu - JE, Shri Chalapaka Ramraju - JE, Shri Naveen Kumar P. - JE,
Shri Jai Prakash - Chief Estimator, Shri Kishan Singh - Sr. D/man, Shri Bhim Singh -
Sr. D/man; Shri Sanjeev Rastogi - SE(C&M) and his team comprising Shri Virendra Kumar - EE(M),
Shri Keshav Ram - EE(C), Shri H. K. Gupta - AE(C), Shri Dalbir Singh - Sr.D/man; Shri Som Lal
Kajal - EE(HQ); Shri Sanjay Singh - AD(OL) and his team for Hindi translation of DSR-2016,
and other officers and staff of CSQ whose names are not mentioned here, for their sincere efforts
made in the preparation of this document in such a short time. Various Committees and field units,
who contributed field inputs, also deserve appreciation for their timely help.
10.0 Although due care has been taken to print the DSR- 2016 as correctly as possible, there is
possibility that some errors might have crept in inadvertently. In case, any error or omission is
noticed, it may be brought to the notice of Superintending Engineer (TAS), CPWD, Room no.
418, A, Nirman Bhawan, New Delhi 110011 (Tele fax. 011-23062339 ).
(Balraj Chadha)
ADG (TD) CPWD
Note :- In case of any discrepancy between English and Hindi versions, the English version
shall be held valid.
VII
Committees for Bringing Out New edition of DSR 2016
CPWD DSR is a very comprehensive document. Delhi Schedule of Rate 2016 includes the existing
item of DSR 2014 with deletion of few obsolete items, merger of similar items and addition of new
items in line with emerging trends in construction industry. DSR 2016 is based on prevailing market
rates of material and labour in Delhi as on 01.04.2016. To bring out new edition of DSR 2016 it
was felt necessary to take input from as many officers as possible and utilize their experiences in
this regard. Accordingly, the following committees were constituted for the above task.
1. Drafting Committee
(a) Shri M.K. Sharma, CE (CSQ)-Civil Chairman
(b) Shri S.P. Chaudhary, Director (Tech. & PR) Member
(c) Shri Sanjeev Rastogi, SE (C&M) Member
(d) Shri P.P. Singh, SE (QA-cum-TLC) Member
(e) Shri K.R. Meena, EE (TAD) Member
(f) Shri R.B. Garg, EE (TAS) Member
(g) Shri Kunwar Chandresh, EE (E-gov.) Member
(h) Shri D.K. Chaudhary, EE (QA) Member
(i) Shri S.K. Srivastava, EE (QA) Member
(j) Shri Keshav Ram, EE (Contracts) Member
(k) Shri Virendra Kumar, EE (Manual) Member
3. Committee for review/ revision of items of sub head 9, 21, & 25 of DSR 2014
(a) Shri Prabhakar Singh, CE (NDZ)-I Chairman
(b) Shri K.S. Warriach, SE (P)-NDZ-I Member
(c) Shri Manoj Talreja, SE DCC-II Member
4. Committee for review/ revision of items of sub head 1, 2 & 26 of DSR 2014
(a) Shri Akhilesh Kumar, CE (NDZ)-II Chairman
(b) Shri R.K. Kashyap SE (P)-NDZ-II Member
(c) Shri B.K. Sinha, SE-DCC-IX Member
VIII
5. Committee for review/ revision of items of sub head 11,12 & 13 of DSR 2014
(a) Shri Bhagwan Singh, CE (NDZ)-III Chairman
(b) Shri N.K. Khatri, SE (P)-DCC-VI Member
(c) Shri Rajeev Gupta, SE-DCC-VIII Member
6. Committee for review/revision of items of sub head 6, 7, 10, & 24 of DSR 2014
(e) Shri P.K. Singh, CE (NDZ)-IV Chairman
(a) Shri Rajeev Gupta, SE-DCC-V Member
(b) Shri R.R. Verma, PM SCP Member
7. Committee for review / revision of items of sub head 17 & 18 of DSR 2014
(a) Shri Ranjit Singh, CE (NDZ-V) Chairman
(b) Shri Rajesh Banga, SE-DCC-IV Member
(c) Shri Prem Mohan, PM NDP Circle Member
(d) Shri Anurag Khare, SE-VBC Member
11. Committee for review/revision of items of sub head 16 & 19 of DSR 2014
(a) Shri S.K. Rampal, CE (PWD-MZ-I) Chairman
(b) Shri Pradeep Gupta, CE, (East Zone) Member
(c) Shri A.K. Agarwal, SE (NE) Member
(d) Shri K.R. Bhandaria, SE (NW) Member
12. Committee for making available basic rates for building materials as on 01.04.2016
(a) Shri Prabhakar Singh, CE (NDZ)-I Now ADG (NDR)
(b) Shri Akhilesh Kumar, CE (NDZ)-II
(c) Shri Bhagwan Singh, CE (NDZ)-III
(d) Shri P.K. Singh, CE (NDZ)-IV
(e) Shri S.K. Rampal, CE (PWD MZ-I)
The above committees carried out their work under the overall supervision and guidance of
Shri P.K. Garg the then ADG (TD).
****
IX
C O N T E N T S
Vol. 1
SH. No. NAME OF SUB-HEAD PAGE No.
A. BASIC RATES
0.2 LABOUR 5
0.3 MATERIALS 7
B. SUB -HEADS
1. Carriage of Materials 66
2. Earth Work 74
3. Mortars 82
4. Concrete Work 85
X
C O N T E N T S
Vol. 2
SH. No. NAME OF SUB-HEAD PAGE No.
13 Finishing 223
19 Drainage 349
XI
DELHI SCHEDULE OF RATES
(Vol. 2)
fnYyh nj vuqlwph
Hkkx - 2
2016
SUB HEAD : 13.0
FINISHING
223
BASIC RATES (SH: 13.0 FINISHING)
13.22 Extra for plastering exterior walls of height more than 10 m from
ground level for every additional height of 3 m or part thereof. sqm 40.65
13.23 Extra for plastering on circular work not exceeding 6 m in radius:
13.23.1 In one coat sqm 20.85
13.23.2 In two coats sqm 31.80
13.24 Extra for plastering done on moulding, cornices or architraves
including neat finish to line and level:
13.24.1 In one coat sqm 305.45
13.24.2 In two coats sqm 503.20
13.25 Extra for plastering:
13.25.1 Spherical ceiling sqm 77.70
13.25.2 Groined ceiling sqm 84.45
13.25.3 Flewing soffits sqm 51.20
13.26 Providing and applying plaster of paris putty of 2 mm thickness over
plastered surface to prepare the surface even and smooth complete. sqm 118.70
ARTIFICIAL STONE PLASTER
13.27 Extra for lining out plaster to imitate stone or concrete blocks walling. sqm 48.85
PLAIN CEMENT MORTAR BANDS
13.28 12 mm thick plain cement mortar bands in cement mortar 1:4 (1
cement : 4 fine sand):
13.28.1 Flush Band cm per metre 3.45
13.28.2 Sunk Band cm per metre 3.75
13.28.3 Raised Band cm per metre 4.25
13.28.4 Moulded Band cm per metre 7.15
13.29 18 mm thick plain cement mortar band in cement mortar 1:4
(1 cement : 4 fine sand):
13.29.1 Flush Band cm per metre 4.25
13.29.2 Sunk Band cm per metre 4.65
13.29.3 Raised Band cm per metre 5.25
13.29.4 Moulded Band cm per metre 9.60
13.30 18 mm thick moulded cement mortar band in two coats under layer
12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top
layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand). cm per metre 9.60
POINTING ON BRICK WORK
13.31 Pointing on brick work or brick flooring with cement mortar 1:3 (1
cement : 3 fine sand):
13.31.1 Flush / Ruled/ Struck or weathered pointing sqm 115.85
13.31.2 Raised and cut pointing sqm 188.70
13.52 Finishing with Epoxy paint (two or more coats) at all locations prepared
and applied as per manufacturer's specifications including appropriate
priming coat, preparation of surface, etc. complete.
13.52.1 On steel work sqm 122.50
13.52.2 On concrete work sqm 124.50
13.53 Painting on G.S. sheet with synthetic enamel paint of approved brand
and manufacture of required colour to give an even shade :
13.53.1 New work (two or more coats) including a coat of approved
steel primer but excluding a coat of mordant solution sqm 84.00
13.54 Applying a coat of mordant solution on G.S. sheet:
13.54.1 With a solution of 38 gms of copper acetate in a litre of
soft water sqm 29.25
13.54.2 With a solution made of 13 gms of hydrochloric acid in a
solution of 13 gms each of copper chloride, copper nitrate
and ammonium chloride dissolved in a litre of soft water sqm 29.05
13.55 Painting (two or more coats) on rain water, soil, waste and vent
pipes and fittings with black anticorrosive bitumastic paint of approved
brand and manufacture, over and including a priming of ready mixed
zinc chromate yellow primer on new work:
13.55.1 100 mm diameter pipes metre 35.85
13.55.2 150 mm diameter pipes metre 53.50
13.56 Painting (two or more coats) on rain water, soil, waste and vent
pipes and fittings with synthetic enamel paint of approved brand and
manufacture and required colour over a priming coat of approved
steel primer on new work.
13.56.1 100 mm diameter pipes metre 40.55
13.56.2 150 mm diameter pipes metre 60.40
13.57 Painting with oil type wood preservative of approved brand and
manufacture :
13.57.1 New work (two or more coats) sqm 32.20
13.58 Providing and applying two coats of fire retardant paint on cleaned
wood / ply surface @ 3.5 sqm per litre per coat including preparation
of base surface as per recommendations of manufacturer to make
the surface fire retardant. sqm 232.55
13.59 Coal tarring two coats on new work using 0.16 Litre and 0.12 litre
coal tar per sqm in the first coat and second coat respectively. sqm 33.45
13.60 Wall painting with acrylic emulsion paint of approved brand and
manufacture to give an even shade :
13.60.1 Two or more coats on new work sqm 84.45
13.61 Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade :
13.61.1 Two or more coats on new work sqm 78.40
13.73 Forming groove of uniform size in the top layer of washed stone grit
plaster as per approved pattern using wooden battens, nailed to the
under layer, including removal of wooden battens, repair to the edges
of panels and finishing the groove complete as per specifications
and direction of the Engineer-in-charge :
13.73.1 15 mm wide and 15 mm deep groove metre 34.40
13.73.2 20 mm wide and 15 mm deep groove metre 34.95
13.74 Extra for washed grit plaster on exterior walls of height more than 10
m from ground level for every additional height of 3 m or part thereof. sqm 85.90
13.75 Extra for washed stone grit plaster on circular work not exceeding 6
m in radius (in two coats). sqm 60.45
13.76 Forming groove of uniform size from 12x12 mm and upto 25x15 mm
in the top layer of washed stone grit plastered surface as per approved
pattern, including providing and fixing aluminum channels of
appropriate size and thickness (not less than 2 mm), nailed to the
under layer with rust proof screws and nails and finishing the
groove complete as per specifications and direction of the Engineer-in-
Charge. metre 71.60
13.77 Extra for using white cement in place of ordinary cement in the top
layer of the item of washed stone grit plaster. sqm 63.90
13.78 Providing and applying 12 mm thick (average) premixed formulated
one coat gypsum lightweight plaster having additives and light weight
aggregates as vermiculite/ perlite respectively conforming to IS: 2547
(Part - 1 & II) 1976, applied on hacked / uneven background such
as bare brick/ block/ RCC work on walls & ceiling at all floors and
locations, finished in smooth line and level etc. complete. sqm 217.35
13.79 Extra for addition of synthetic Polyester triangular fibre of length
6 mm, effective diameter 10-40 microns and specific gravity of
1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Per Bag of
Polyester triangular fibre for 50 Kgs. cement used in cement mortar 50 Kg of
as per directions of Engineer-in-Charge. cement 58.10
13.80 Providing and applying white cement based putty of average thickness
1 mm, of approved brand and manufacturer, over the plastered wall
surface to prepare the surface even and smooth complete. sqm 87.35
13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile
Organic Compound ) content less than 50 grams/ litre, of approved
brand and manufacture, including applying additional coats wherever
required, to achieve even shade and colour.
13.81.1 One coat sqm 30.90
13.81.2 Two coats sqm 49.65
13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic
Compound ) content less than 50 grams/ litre, of approved brand and
manufacture, including applying additional coats wherever required,
to achieve even shade and colour.
13.82.1 One coat sqm 49.35
13.82.2 Two coats Sqm 73.90
13.83 Wall painting with premium acrylic emulsion paint of interior grade,
having VOC (Volatile Organic Compound ) content less than 50
grams/ litre of approved brand and manufacture, including applying
additional coats wherever required to achieve even shade and colour.
13.83.1 One coat sqm 46.65
13.83.2 Two coats Sqm 71.00
13.84 Painting with synthetic enamel paint, having VOC (Volatile Organic
Compound) content less than 150 grams/ litre, of approved brand
and manufacture, including applying additional coats wherever
required to achieve even shade and colour.
13.84.1 One coat sqm 49.75
13.84.2 Two coats sqm 75.00
13.85 Applying priming coats with primer of approved brand and
manufacture, having low VOC (Volatile Organic Compound ) content.
13.85.1 With ready mixed pink or grey primer on wood work
(hard and soft wood) having VOC content less than 50
grams/ litre sqm 38.45
13.85.2 With ready mixed red oxide zinc chromatic on steel /
iron works having VOC content less than 250 grams/
litre sqm 32.55
13.85.3 With water thinnable cement primer on wall surface
having VOC content less than 50 grams/litre sqm 36.95
13.86 6 mm plaster on cement concrete or reinforced cement
concrete work with white cement based polymer modified
self curing mortar of approved make as per the direction of
Engineer-In-Charge. sqm 146.45
REPAIRS TO BUILDING
236
BASIC RATES (SH: 14.0 REPAIRS TO BUILDING)
0006 Hire charges of Spraying machine including electric charges day 250.00
0011 Hire charges of Pump set of capacity 4000 litres/hour day 650.00
0058 Air compressor hour 200.00
0085 Using cost of Ultra Violet Radiation tube Hour 189.00
0086 Compressor, gun, rubber pipes & other accessories- hire charge
of plant & machinery i/c necessary fuel day 4000.00
0087 Hire Charges of Suction Jeting machine 2200 PSI machine including
POL and operator day 36000.00
0100 Bandhani day 407.00
0101 Bhisti day 407.00
0102 Blacksmith 1st class day 487.00
0103 Blacksmith 2nd class day 448.00
0111 Carpenter 1st class day 487.00
0112 Carpenter 2nd class day 448.00
0114 Beldar day 368.00
0115 Coolie day 368.00
0116 Fitter (grade 1) day 487.00
0117 Assistant fitter or 2nd class fitter day 448.00
0119 Glazier day 448.00
0123 Mason (brick layer) 1st class day 487.00
0124 Mason (brick layer) 2nd class day 448.00
0126 Mason 1st class day 487.00
0128 Mate day 407.00
0129 Sewer man day 390.00
0130 Mistry day 487.00
0131 Painter day 448.00
0138 Sprayer (for bitumen, tar etc.) day 407.00
0139 Skilled Beldar (for floor rubbing etc.) day 407.00
0141 White Washer day 407.00
0155 Mason (average) day 467.00
0156 Carpenter (average) day 467.00
0160 Technician day 775.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1300.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1300.00
0302 Safeda ballies 125 mm diameter metre 35.00
0308 Bhusa quintal 600.00
0367 Portland Cement (OPC-43 grade) tonne 5700.00
0389 Brass single acting spring hinges 150 mm each 460.00
0390 Brass single acting spring hinges 125 mm each 298.00
0391 Brass single acting spring hinges 100 mm each 260.00
0392 Brass double acting spring hinges 150 mm each 498.00
7752 PVC slotted pipe 200 mm dia as per IS: 12818 metre 700.00
8500 Water for jetting / blowback 1000 litre 1500.00
8505 Acrylic exterior paint litre 170.00
8506 Premium Acrylic exterior paint litre 203.00
8507 Textured exterior paint litre 230.00
8508 Primer for cement paint litre 70.00
9977 Carriage L.S. 1.73
9988 Carriage and sundries L.S. 1.73
9999 Sundries L.S. 1.73
14.19 Taking out wind ties from roof including cutting out rusted bolts,
nuts etc. and removing materials to any distance within compound
and stacking. kg 2.25
14.20 Fixing of old wind tie with new fittings including painting two or more
coats with anticorrosive bitumastic paint of approved brand &
manufacturer over and including priming coat of ready mixed zinc
chromate yellow primer of approved brand. metre 74.40
14.21 Renewing bottom rail and/or top runner of collapsible gate including
making good all damages and applying priming coat of zinc chromate
yellow primer of approved brand and manufacturer. kg 144.10
14.22 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate
and fitting and fixing the same with necessary clamps, nuts and
bolts/welding and erection etc. complete.
14.22.1 Wheel 50 mm dia and below per wheel 122.65
14.22.2 Wheel above 50 mm dia per wheel 187.25
EARTH WORK
14.23 Pumping out water caused by springs, tidal or river seepage, broken
water mains or drains and the like. kilo litre 104.30
14.24 Mud mortar made with local clay good earth. cum 533.20
BRICK WORK
14.25 Brick work with common burnt clay bricks of class designation 7.5
in mud mortar cum 3972.20
WOOD WORK
14.26 Providing and fixing 25 mm thick shutters for cup board etc. :
14.26.1 Panelled or panelled & glazed shutters :
14.26.1.1 Superior class teak wood including nickel
plated bright finished M.S. piano hinges with
necessary screws. sqm 3492.55
14.26.1.2 Ist class teak wood including nickel plated
bright finished M.S. piano hinges with
necessary screws. sqm 2954.85
14.26.2 Glazed shutters :
14.26.2.1 Superior class teak wood including nickel
plated bright finished M.S. piano hinges with
necessary screws. sqm 3563.10
14.26.2.2 Ist class teak wood including nickel plated
bright finished M.S. piano hinges with
necessary screws. sqm 2985.05
14.27 Providing and fixing plain jaffri door and window shutters including
bright or/and black enamelled M.S. butt hinges with necessary
screws 35x10 mm laths placed 35 mm apart (frames to be paid
separately), including fixing 50x12 mm beading complete with :
14.27.1 Second class teak wood sqm 2837.20
14.28 Providing and fixing brass curtain rods of wall thickness 1.25 mm
with two brass brackets fixed with brass screws and wooden plugs
etc. wherever necessary complete.
14.28.1 20 mm diameter. metre 222.10
14.28.2 25 mm diameter. metre 245.35
14.29 Providing and fixing M.S. round or square bars with M.S. flats
at required spacing in wooden frames of windows and clerestory
windows. kg 61.80
14.30 Providing joists (karries) including hoisting, fixing in position and
applying wood preservative on unexposed surface etc. complete
with :
14.30.1 Sal wood cum 75873.50
14.30.2 Hollock wood cum 45070.55
14.31 Providing and fixing bright finished brass single acting spring hinges
with necessary brass screws etc. complete :
14.31.1 150 mm each 586.65
14.31.2 125 mm each 398.45
14.31.3 100 mm each 349.70
14.32 Providing and fixing bright finished brass double acting spring hinges
with necessary brass screws etc. complete :
14.32.1 150 mm each 630.75
14.32.2 125 mm each 528.55
14.32.3 100 mm each 477.45
14.33 Providing and fixing bright finished brass flush bolts with necessary
brass screws etc. complete :
14.33.1 250 mm each 193.25
14.33.2 150 mm each 168.10
14.33.3 100 mm each 121.65
14.34 Providing and fixing 150 mm bright finished floor brass door stopper
with rubber cushion, necessary brass screws etc. to suit shutter
thickness complete each 211.15
14.35 Providing and fixing bright finished brass hard drawn hooks and
eyes :
14.35.1 300 mm each 79.05
14.35.2 250 mm each 77.35
14.35.3 200 mm each 72.10
14.35.4 150 mm each 55.85
14.35.5 100 mm each 50.05
14.36 Providing and fixing bright finished brass fan light pivot with necessary
brass screws etc. complete. each 35.25
14.37 Providing and fixing 300 mm long bright finished brass chain with
hook for fan light including necessary brass screws etc. complete. each 56.95
14.38 Providing and fixing bright finished brass quadrant stay 300 mm
long with necessary brass screws etc. complete. each 155.65
14.39 Providing and fixing bright finished brass helical door spring (superior
quality). each 404.55
14.40 Providing and fixing chromium plated brass butt hinges with
necessary chromium plated brass screws etc. complete.
14.40.1 125x70x4 mm (ordinary type) each 156.95
14.40.2 100x70x4 mm (ordinary type) each 128.85
14.40.3 75x65x4 mm (heavy type) each 146.15
14.40.4 75x40x2.5 mm (ordinary type) each 83.40
14.40.5 50x40x2.5 mm (ordinary type) each 35.85
14.41 Providing and fixing 85x42 mm chromium plated brass pull bolt lock
with necessary chromium plated brass screws, nuts, bolts and
washers etc. complete. each 205.95
FINISHING
14.42 White washing with lime to give an even shade :
14.42.1 Old work (two or more coats) sqm 10.25
14.42.2 Old work (one or more coats) sqm 6.30
14.43 Removing white or colour wash by scrapping and sand papering
and preparing the surface smooth including necessary repairs to
scratches etc. complete sqm 8.35
14.44 Distempering with dry distemper of approved brand and manufacture
(one or more coats) and of required shade on old work to give an
even shade. sqm 30.05
14.45 Distempering with oil bound washable distemper of approved brand
and manufacture to give an even shade :
14.45.1 Old work (one or more coats) sqm 33.35
14.46 Removing dry or oil bound distemper, water proofing cement paint
and the like by scrapping, sand papering and preparing the surface
smooth including necessary repairs to scratches etc. complete. sqm 10.80
14.47 Painting on G.S. sheet with synthetic enamel paint of approved
brand and manufacture of required colour to give an even shade :
14.47.1 Old work (one or more coats) sqm 43.60
14.48 Painting (two or more coats) on rain water, soil, waste and vent
pipes and fittings with black anticorrosive bitumastic paint of approved
brand and manufacture over and including a priming coat of ready
mixed zinc chromate yellow primer on new work :
14.48.1 75 mm diameter pipes metre 26.85
14.49 Painting (one or more coats) on rain water, soil, waste and vent
pipes and fittings with black anticorrosive bitumastic paint of approved
brand and manufacture on old work :
14.49.1 75 mm diameter pipes metre 13.00
14.61 Painting (one or more coats) with black Japan paint of approved
brand and manufacture to give an even shade. sqm 44.80
14.62 Providing and fixing C.P. brass chain and rubber plug complete for
sink or wash basin:
14.62.1 32 mm dia each 62.65
14.62.2 40 mm dia each 62.65
14.63 Distempering with 1st quality acrylic washable distemper (ready
made) of approved manufacturer and of required shade and colour
complete. as per manufacturer's specification.
14.63.1 One or more coats on old work sqm 29.80
14.64 Finishing walls with water proofing cement paint of required shade :
14.64.1 Old work (one or more coats applied @ 2.20 kg/10 sqm)
over priming coat of primer applied @ 0.80 litrs/10 sqm
complete including cost of Priming coat. sqm 55.70
14.64.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm 37.90
14.65 Finishing walls with textured exterior paint of required shade :
14.65.1 Old work (Two or more coats on existing cement paint
surface applied @ 3.28 ltr/10 sqm. sqm 124.75
14.65.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. sqm 76.20
14.66 Finishing walls with Acrylic Smooth exterior paint of required shade:
14.66.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm)
on existing cement paint surface sqm 68.95
14.66.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm 45.35
14.67 Finishing walls with Premium Acrylic Smooth exterior paint with
Silicone additives of required shade
14.67.1 Old work (Two or more coats applied @ 1.43 ltr/ 10
sqm)
over existing cement paint surface sqm 70.75
14.67.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm 47.25
14.69 Varnishing with varnish of approved brand and manufacture:
14.69.1 One or more coats with copal varnish sqm 46.95
14.69.2 One or more coats with spar varnish sqm 47.50
14.70 Melamine polishing on wood work (one or more coat). sqm 79.50
14.71 Varnishing with flatting varnish of approved brand and manufacture
one or more coats on old work. sqm 47.20
14.72 Providing and fixing double scaffolding system (cup lock type) on
the exterior side, up to seven story height made with 40 mm dia
M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining
with cup & lock system with M.S. tubes, M.S. tube challies, M.S.
clamps and M.S. staircase system in the scaffolding for working
platform etc. and maintaining it in a serviceable condition for the
required duration as approved and removing it there after .The
DISMANTLING
AND
DEMOLISHING
251
BASIC RATES (SH:15.0 DISMANTLING AND DEMOLISHING)
15.10 Dismantling dressed stone work ashlar face stone work, marble work
or precast concrete work manually/ by mechanical means including
stacking of serviceable and disposal of unserviceable material within
50 metres lead as per direction of Engineer-in-charge :
15.10.1 In lime mortar cum 599.60
15.10.2 In cement mortar cum 1176.65
15.11 Removing mortar from and cleaning stones and concrete articles
(net quantity of stacks of cleaned materials will be measured):
15.11.1 In lime mortar cum 198.05
15.11.2 In cement mortar cum 284.30
15.12 Dismantling doors, windows and clerestory windows (steel or wood)
shutter including chowkhats, architrave, holdfasts etc. complete and
stacking within 50 metres lead :
15.12.1 Of area 3 sq. metres and below each 157.85
15.12.2 Of area beyond 3 sq. metres each 216.40
15.13 Taking out doors, windows and clerestory window shutters (steel or
wood) including stacking within 50 metres lead :
15.13.1 Of area 3 sq. metres and below each 61.25
15.13.2 Of area beyond 3 sq. metres each 81.00
15.14 Dismantling wood work in frames, trusses, purlins and rafters up to
10 metres span and 5 metres height including stacking the material
within 50 metres lead :
15.14.1 Of sectional area 40 square centimetres and above cum 1922.45
15.14.2 Of sectional area below 40 square centimetres metre 7.70
15.15 Extra for dismantling trusses, rafters, purlins etc. of wood work
for every additional span of one metre or part thereof beyond 10
metres :
15.15.1 Of sectional area 40 square centimetres and above Cum per
metre span 259.20
15.15.2 Of sectional area below 40 square centimetres Metre per
metre span 0.75
15.16 Extra for dismantling trusses, rafters, purlins etc. of wood work
for every additional height of one metre or part thereof beyond 5
metres :
15.16.1 Of sectional area 40 square centimetres and above Cum per
metre height 370.70
15.16.2 Of sectional area below 40 square centimetres Metre per
metre height 1.45
15.17 Dismantling steel work in single sections including dismembering
and stacking within 50 metres lead in:
15.17.1 R.S. Joists kg 1.40
15.17.2 Channels, angles, tees and flats kg 0.95
15.18 Dismantling steel work in built up sections in angles, tees, flats and
channels including all gusset plates, bolts, nuts, cutting rivets, welding
etc. including dismembering and stacking within 50 metres lead. kg 2.40
15.19 Dismantling steel work manually/ by mechanical means in built up
sections without dismembering and stacking within 50 metres lead
as per direction of Engineer-in-charge. kg 1.60
15.20 Extra for dismantling trusses, rafters, purlins etc. of steel work for Kg per
every additional span of one metre or part thereof beyond 10 metres metre
span 0.35
15.21 Extra for dismantling trusses, rafters, purlins etc. of steel work for Kg per
every additional height of one metre or part thereof beyond 5 metres. metre
height 0.35
15.22 Extra for marking of structural steel work required to be re-erected. kg 2.00
15.23 Dismantling tile work in floors and roofs laid in cement mortar including
stacking material within 50 metres lead.
15.23.1 For thickness of tiles 10 mm to 25 mm sqm 31.55
15.23.2 For thickness of tiles above 25 mm and up to 40 mm sqm 49.20
15.24 Demolishing dry brick pitching in floors, drains etc. including stacking
serviceable material and disposal of unserviceable material within
50 metres lead : cum 539.80
15.25 Dismantling stone slab flooring laid in cement mortar including
stacking of serviceable material and disposal of unserviceable material
within 50 metres lead. sqm 109.35
15.26 Demolishing brick tile covering in terracing including stacking of
serviceable material and disposal of unserviceable material within
50 metres lead. sqm 45.70
15.27 Demolishing mud phaska in terracing and disposal of material within
50 metres lead. cum 373.95
15.28 Dismantling roofing including ridges, hips, valleys and gutters etc.,
and stacking the material within 50 metres lead of:
15.28.1 G.S. Sheet sqm 70.10
15.28.2 Asbestos sheet sqm 32.85
15.29 Dismantling stone slab roofing over wooden karries or R.C.C. battens
(dismantling karries and battens to be paid for separately), including
stacking of serviceable material and disposal of unserviceable material
within 50 metres lead. cum 1093.30
15.30 Dismantling jack arch roofing and floors including stacking of
serviceable material and disposal of unserviceable material within
50 metres lead. sqm 104.20
15.31 Dismantling tiled roofing with battens, boarding etc. complete including
stacking of serviceable material and disposal of unserviceable
material within 50 metres lead. sqm 86.25
15.32 Demolishing thatch roofing including mats, bamboo, jaffari etc.
complete including stacking of serviceable material and disposal of
unserviceable material within 50 metres lead. sqm 23.80
15.44 Dismantling G.I. pipes (external work) including excavation and refilling
trenches after taking out the pipes, manually/ by mechanical means
including stacking of pipes within 50 metres lead as per direction of
Engineer-in-charge :
15.44.1 15 mm to 40 mm nominal bore metre 63.65
15.44.2 Above 40 mm nominal bore metre 70.85
15.45 Dismantling C.I. pipes including excavation and refilling trenches
after taking out the pipes, manually/ by mechanical means breaking
lead caulked joints, melting of lead and making into blocks including
stacking of pipes & lead at site within 50 metre lead as per direction
of Engineer-in-charge:
15.45.1 Up to 150 mm diameter metre 183.05
15.45.2 Above 150 mm dia up to 300 mm dia metre 242.05
15.45.3 Above 300 mm diameter metre 314.40
15.46 Dismantling steel cylinder R.C. pipes including excavation and
refilling trenches after taking out the pipes, manually/ by mechanical
means breaking lead caulked joints, melting of lead and making into
blocks including stacking of pipes & lead at site within 50 metres
lead as per direction of Engineer-in-charge :
15.46.1 Up to 600 mm diameter metre 299.10
15.46.2 Above 600 mm diameter metre 752.85
15.47 Dismantling asbestos cement pressure pipes including excavation
and refilling trenches after taking out the pipes manually/ by
mechanical means and stacking the pipes within 50 metres lead as
per direction of Engineer-in-charge :
15.47.1 Up to 150 mm diameter metre 135.70
15.47.2 Above 150 mm diameter metre 164.80
15.48 Taking out C.I. cover with frame from R.C.C. top slab of manholes of
various sizes including demolishing of R.C.C. work manually/ by
mechanical means and stacking of useful materials near the site
and disposal of unserviceable materials within 50 metres lead as per
direction of Engineer-in-charge. each 290.55
15.49 Taking out C.I. cover with frame from R.C.C. top slab of inspection
chambers of various sizes including demolishing of R.C.C. work
manually/ by mechanical means and stacking of useful materials
near the site and disposal of unserviceable materials within 50 metres
lead as per direction of Engineer-in-charge. each 170.15
15.50 Dismantling of R.C.C. spun vent shaft including excavating the
cement concrete pit completely, taking out the shaft, refilling
the excavated gap, stacking the useful materials near the site and
disposal of unserviceable materials within 50 metres lead. each 1947.25
15.51 Dismantling of road gully chamber of various sizes including C.I.
grating with frame including stacking of useful materials near the
site and disposal of unserviceable materials within 50 metres lead
including refilling the excavated gap. each 397.15
ROAD WORK
259
BASIC RATES (SH: 16.0 ROAD WORK)
0001 Hire charges of Coaltar Boiler 900 to 1400 litres day 800.00
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00
0003 Hire charges of Diesel Road Roller - 8 to 10 tonne day 2200.00
0004 Production cost of concrete by batch mix plant cum 400.00
0007 Hire charges of Coaltar Sprayer day 250.00
0008 Hire charges of Barber green,drying, mixing and asphalt plant,
with accessories,capacity 30/45 tonne day 7700.00
0009 Pumping charges of concrete including Hire charges of pump, piping
work & accessories etc. cum 200.00
0012 Vibrator (Needle type 40 mm) day 350.00
0013 Machine for rubbing of floors day 350.00
0014 Front end loader capacity 1.00 cum day 6000.00
0016 Mastic cooker day 750.00
0017 Hire and running charges of tipper day 1800.00
0018 Hire and running charges of loader day 6000.00
0021 Pin vibrator day 250.00
0022 Surface Vibrator day 250.00
0023 Hot Bitumen Mixer 0.5 cum i/c hand cart day 3500.00
0029 Carriage of concrete by transit mixer km/cum 23.00
0030 Generator 250 KVA day 2500.00
0033 Paint applicator day 800.00
0038 Tractor with ripper attachment day 1100.00
0041 Joint cutting machine with 2,3 blades day 750.00
0042 CC batch mix plant day 10000.00
0043 Road sweeper day 550.00
0045 Slip form paver with sensor day 13000.00
0046 Water tanker 5000 litre day 1100.00
0047 Concrete joint cutting machine day 900.00
0048 Texturing machine day 925.00
0049 Dozer D-80-A12 hour 2000.00
0050 Motor Grader 3.35 metre blade hour 2100.00
0051 Hydraulic Excavator of 1 cum bucket hour 800.00
0052 Front end loader 1 cum bucket capacity (incl POL) hour 800.00
0053 Tipper-5 Cum tonne km 3.00
0054 Vibratory roller 8 to 10 tonne hour 650.00
0055 Smooth Wheeled Roller 8 to 10 tonne hour 200.00
0056 Tandem Road Roller hour 1150.00
0057 Water Tanker 5 to 6 KL capacity hour 200.00
0058 Air compressor hour 200.00
0059 Wet Mix Plant 60 TPH hour 750.00
0060 Mechanical Broom hydraulic hour 200.00
SUB HEAD : 16.0 ROAD WORK 260
Code Description Unit Rate
No.
0061 Emulsion Pressure Distributor @ 1750 sqm per hour hour 800.00
0062 Hot mix Plant -120 TPH capacity hour 15000.00
0063 Hot mix Plant 100 TPH Capacity hour 13000.00
0064 Paver finisher Hydrostatic with sensor control 100 TPH hour 1500.00
0065 Paver finisher Mechanical 100 TPH hour 700.00
0066 Batching and Mixing Plant @ 75 cum per hour hour 2500.00
0068 Concrete paver finisher with 40 HP motor and sensor hour 2500.00
0069 Generator 250 KVA hour 400.00
0070 Generator 100 KVA/125 KVA hour 300.00
0071 Truck 5.5 cum/10tonne tonne km 3.00
0075 Road sweeper (Mechamical Broom) @ 1250 sqm per hour hour 300.00
0076 Drum Type HMP of 60-90 TPH capacity @ 75 tonne per hour
actual output hour 11000.00
0083 Hire charges of TATA 407 or equivalent for local shifting. day 1400.00
0100 Bandhani day 407.00
0101 Bhisti day 407.00
0102 Blacksmith 1st class day 487.00
0103 Blacksmith 2nd class day 448.00
0113 Chowkidar day 368.00
0114 Beldar day 368.00
0115 Coolie day 368.00
0116 Fitter (grade 1) day 487.00
0123 Mason (brick layer) 1st class day 487.00
0124 Mason (brick layer) 2nd class day 448.00
0125 Mason (for plain stone work) 2nd class day 448.00
0126 Mason (for ornamental stone work) 1st class day 487.00
0128 Mate day 407.00
0130 Mistry day 487.00
0131 Painter day 448.00
0138 Sprayer (for bitumen, tar etc.) day 407.00
0139 Skilled Beldar (for floor rubbing etc.) day 407.00
0155 Mason (average) day 467.00
0157 Operator (Pile/ Special machine) day 487.00
0286 Brick Aggregate (Single size) : 50 mm nominal size cum 750.00
0287 Brick Aggregate (Single size) : 40 mm nominal size cum 750.00
0291 Stone Aggregate (Single size) : 63 mm nominal size cum 1150.00
0292 Stone Aggregate (Single size) : 50 mm nominal size cum 1150.00
0293 Stone Aggregate (Single size) : 40 mm nominal size cum 1250.00
0294 Stone Aggregate (Single size) : 25 mm nominal size cum 1250.00
0295 Stone Aggregate (Single size) : 20 mm nominal size cum 1300.00
0296 Stone Aggregate (Single size) : 12.5 mm nominal size cum 1300.00
0297 Stone Aggregate (Single size) : 10 mm nominal size cum 1300.00
ROADS
16.1 Preparation and consolidation of sub grade with power road roller of
8 to 12 tonne capacity after excavating earth to an average of 22.5
cm depth, dressing to camber and consolidating with road roller
including making good the undulations etc. and re-rolling the sub
grade and disposal of surplus earth with lead upto 50 metres. sqm 90.10
16.2 Extra for compaction of earth work in embankment under optimum
moisture conditions to give at least 95% of the maximum dry density
(proctor density). cum 10.70
16.3 Supplying and stacking at site.
16.3.1 90 mm to 45 mm size stone aggregate cum 1336.05
16.3.2 63 mm to 45 mm size stone aggregate cum 1449.30
16.3.3 53 mm to 22.4 mm size stone aggregate cum 1542.25
16.3.4 Over burnt (Jhama) brick aggregate 120 mm to 40 mm cum 653.70
16.3.5 Over burnt (Jhama) brick aggregate 90 mm to 45 mm cum 676.90
16.3.6 Stone screening 13.2 mm nominal size (Type A) cum 1505.60
16.3.7 Stone screening 11.2 mm nominal size (Type B) cum 1462.05
16.3.8 Red bajri cum 1514.35
16.3.9 Good earth cum 332.55
16.3.10 Moorum cum 643.20
16.4 Laying, spreading and compacting stone aggregate of specified sizes
to WBM specifications in uniform thickness, hand picking, rolling
with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to
proper grade and camber, applying and brooming requisite type of
screening / binding material to fill up interstices of coarse aggregate,
watering and compacting to the required density . cum 449.10
16.5 Laying water bound macadam sub-base with brick aggregate and binding
material, earth etc. including screening, sorting and spreading to template
and consolidation with light power road-roller etc. complete.(payment
for brick aggregate and moorum etc. to be made separately)
16.5.1 Over burnt (Jhama) brick aggregate 120 mm to 40 mm cum 363.25
16.5.2 Over burnt (Jhama) brick aggregate 90 mm to 45 mm cum 363.25
16.6 Supplying, stacking and Spreading 6 mm thick red bajri, watering
and rolling complete including preparation of the surface and rolling.
16.6.1 With road roller/ hand roller sqm 15.55
16.7 Brick edging in full brick width and half brick depth including
excavation, refilling and disposal of surplus earth lead upto 50 metres.
16.7.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 metre 127.60
16.8 Brick edging laid lengthwise with half brick depth including excavation,
refilling and disposal of surplus earth lead upto 50 metres :
16.8.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 metre 36.20
16.9 Scarifying metalled (water-bound) road surface including disposal of
rubbish, lead upto 50 m and consolidation of the aggregate received
from scarifying with power road roller of 8 to 10 tonne capacity. sqm 14.45
16.10 Making bajri path including preparation of subgrade, supplying and
laying brick aggregate of 50 mm nominal size 7.5 cm deep with
blinding material consisting of 12 mm moorum and 12 mm red bajri
consolidated with road roller. sqm 142.50
16.11 Dry stone pitching 22.5 cm thick including supply of stones and
preparing surface complete. sqm 499.65
16.12 Dry brick pitching half brick thick in drains including supply of bricks
and preparing the surface complete :
16.12.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 sqm 447.45
16.13 Cutting road and making good the same including supply of extra
quantities of materials i.e. aggregate, moorum screening, red bajri
and labour required.
16.13.1 bituminous portion cum 2384.05
16.13.2 Water bound macadam cum 1407.15
16.14 Cutting bajri paths and making good the same including supply of
extra quantities of brick aggregate, moorum and red bajri required. sqm 134.55
FENCING
16.15 Supplying at site :
16.15.1 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3
(1 cement : 1.5 coarse sand : 3 graded stone aggregate
12.5 mm nominal size) with wooden plugs or 6mm bar
nibs wherever required as per direction of Engineer-in-
charge (cost of earth works in excavation, concrete works
in foundation to be paid separately). cum 19774.55
16.15.2 Welded steel wire fabric of required width having
rectangular mesh painted with two or more coats of enamel
paint of approved shade over a coat of primer (Priming &
Painting to be paid for separately). kg 60.05
16.16 Supplying and fixing turn buckles and straining bolts for barbed wire
fencing. each set 150.45
16.17 Fencing with R.C.C. post placed at required distance, embedded
in cement concrete blocks, every 15th post, last but one end post
and corner post shall be strutted on both sides and end post one
side only, provided with horizontal lines and two diagonals of barbed
wire weighing 9.38 kg per 100 metres (minimum), between the two
posts fitted and fixed with G.I. staples on wooden plugs or G.I.
binding wire tied to 6 mm bar nibs fixed while casting the post
16.44 Extra for providing and mixing hardening compound of approved quality
as per manufacturer's specification in cement concrete. litre 46.45
16.45 Providing and fixing in position pre-moulded joint filler in expansion per cm
joints. depth per
cm width
per m length 2.20
16.46 Providing and laying in position bitumen hot sealing compound for
expansion joints etc.
16.46.1 Using grade 'A' sealing compound. per cm
depth per cm
width per
m length 2.20
PAINTING AREA / RUNWAY MARKING
16.47 Painting runway/taxi track/apron marking with adequate nos of coats
to give uniform finish with road marking paint of superior make as
approved by the Engineer-in-charge, i/c cleaning the surface of ail
dirt, scales, oil, grease and other foreign mater;al etc. and lining out
complete.
16.47.1 New work (Two or more coats) sqm 104.90
16.47.2 Old work (One or more coats) sqm 66.25
16.48 Painting road surface marking with adequate nos of coats to give
uniform finish with ready mixed road marking paint conforming to IS
: 164, on bituminous surface in white/yellow shade, including cleaning
the surface of all dirt, scales, oil, grease and foreign material etc.
complete.
16.48.1 New work (Two or more coats) sqm 133.10
16.48.2 Old work (One or more coats) sqm 86.90
MISCELLANEOUS
16.49 Making bell mouth opening/ entrance of size 100x50x50 cm for
drainage pipe under footpath, including providing cement concrete
1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm
nominal size) for shape of bell mouth, including plastering providing
and fixing precast R.C.C./ S.F.R.C. slab including plastering with
cement mortar 1:3 (1 cement : 3 fine sand) of 6 mm thickness on
exposed surface of the slab & bell mouth including centring, shuttering
& neat cement punning inside the bell mouth etc. all complete. each 1829.70
16.50 Providing and fixing Glow studs of size 100x20 mm made of heavy
duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or
HIP (High impact polystyrene) or ABS having electronically welded
micro- prismatic lens with abrasion resistant coating as approved by
Engineer in charge. The glow stud shall support a load of 13635 kg
tested in accordance with ASTM D4280. The slope of retro- reflective
surface shall be 35 (+/-5) degress to base .The reflective panels on
both sides with at least 12 cm of reflective area up each side. The
luminance intensity should be as per the specification and shall be
16.62 Providing and applying 2.5 mm thick road marking strips (retro-
reflective) of specified shade/ colour using hot thermoplastic material
by fully/ semi automatic thermoplastic paint applicator machine fitted
with profile shoe, glass beads dispenser, propane tank heater and
profile shoe heater, driven by experienced operator on road surface
including cost of material, labour, T&P, cleaning the road surface of
all dirt, seals, oil, grease and foreign material etc. complete as per
direction of Engineer-in-charge and accordance with applicable
specifications. sqm 391.25
16.63 Providing, laying and making kerb channel 30 cm wide and 50 mm
thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded
stone aggregate 20 mm nominal size) over 75mm bed of dry brick
ballast 40 mm nominal size, well rammed and consolidated
and grouted with fine sand, including finishing the top smooth etc.
complete and as per direction of Engineer-in-charge. sqm 382.05
16.64 Providing and laying 75 mm thick compacted bed of dry brick
aggregate of 40 mm thick nominal size including spreading,
well ramming, consolidating and grouting with jamuna sand, including
finishing smooth etc. complete as per direction of Engineer-in-charge. sqm 141.35
16.65 Providing and fixing post delineators made of ABS round body fitted
with 2 nos 100 mm dia high reflective reflectors and mounted on MS
pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to
be installed as per direction of Engineer-in-charge. each 554.50
16.66 Excavating holes upto 0.10 cum, including getting out the excavated
soil, then returning the soil as deported in layers not exceeding 20
cm in depth, including consolidating and deposited layer by ramming
watering etc., disposing of surplus excavated soil as directed with in
a lead of 50 mm and lift upto 1.5 m.
16.66.1 All kind of soil each 17.55
16.67 Providing and fixing at or near ground level factory made RCC
pavement slab of M-30 grade of size 450x450x50 mm, including
reinforcement with 6 mm dia M.S. bars 4 nos on each side, including
setting in position in footpath to the required level and line over a bed
of 20 mm average thick cement mortar 1:5 (1 cement : 5 coarse
sand), having joint thickness not more than 5mm except on curve,
including filling of joints with same cement mortar and making grooves
etc. complete as per direction of Engineer-in-charge. sqm 654.35
16.68 Providing and laying 60mm thick faciory made cement concrete
interlocking paver block of M -30 grade made by block making
machine with strong vibratory compaction, of approved s;ze, design
& shape, laid in required colour and pattern over and including 50mm
thick compacted bed of coarse sand, filling the joints with line sand
etc. all complete as per the direction of Engineer-in-charge. sqm 615.70
16.69 Providing and laying at or near ground level factory made kerb stone
of M-25 grade cement concrete in position to the required line, level
and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse
sand), including making joints with or without grooves (thickness of
joints except at sharp curve shall not to more than 5mm), including
making drainage opening wherever required complete etc. as per
16.90 Providing and laying tactile tile (for vision impaired persons as per
standards) of size 300x300x9.8mm having water absorption less
than 0.5% and conforming to IS: 15622, of approved make in all
colours and shades in outdoor floors such as footpath, court yard,
multi modals location etc., laid on 20mm thick base of cement mortar
1:4 (1 cement : 4 coarse sand) in all shapes & patterns including
grouting the joints with white cement mixed with matching
pigments etc. complete as per direction of Engineer-in-Charge. sqm 1450.45
16.91 Providing and laying factory made chamfered edge Cement Concrete
paver blocks In foot path, park & lawns driveway or light & traffic
parking etc. of required strength, thickness & size/ shape, made by
table vibratory method using PU mould, laid in required colour &
pattern over 50mm thick compacted bed of course sand, compacting
and proper embedding/laying of inter locking paver blocks into the
sand bedding layer through vibratory compaction by using plate
vibrator, filling the joints with sand and cutting of paver blocks as per
required size and pattern, finishing and sweeping extra sand, all
complete as per manufacturer's specifications & direction of Engineer-
in-Charge.
16.91.1 60mm thick Cement concrete paver block of M-35 grade
with approved colour, design & pattern. sqm 756.15
16.91.2 80mm thick Cement concrete paver block of M-30 grade
with approved colour, design & pattern. sqm 638.95
16.92 Providing and fixing 10x10x7.50 cm Granite stone block hand cut
and chisel dressed on top, for paving in floors, drains etc. laid over
20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with
joints 10mm wide filled with same mortar including ruled pointing etc.
complete as per direction of engineer-in-charge. sqm 1395.25
16.93 Providing and placing in position 100 mm thick factory made machine
batched & machine mixed Precast RCC Rectangular Covers on
drains of footpath of various sizes, of M-25 grade cement concrete
for RCC work, including cost of centering, shuttering, reinforcement
of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on
both ways , neat cement punning on finished surface, properly
encased on all edges with 1.6 mm thick , 100 mm wide MS sheet
duly painted over priming coat , reinforcement to be welded at edges
with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c
cost of cartage, all leads & lift, handling at site etc. all complete as
per direction of Engineer-in-Charge. sqm 1907.95
16.94 Providing & making Gabion structure with Mechanically Woven
Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes
as per IS 16014:2012,MORTH Clause 2500, of required size,
Mesh Type 10x12 (D=100 mm with tolerance of 2%) zinc
coated, Mesh wire diameter 3.0 mm, mechanically edged/
selvedged with partitions at every 1m interval and shall have
minimum 10 numbers of openings per meter of mesh
perpendicular to twist, tying with lacing wire of diameter
2.2mm, supplied @3% by weight of Gabion boxes, filled with
boulders with least dimension of 200 mm, as per drawing, all
complete as per direction of Engineer-in-charge. cum 2501.10
SANITARY INSTALLATIONS
283
BASIC RATES (17.0 SANITARY INSTALLATIONS)
1532 Flush pipe with union spreaders and clamps all in C.P. brass for
single stall each 270.00
1533 Flush pipe with union spreaders and clamps all in C.P. brass for
double stall each 400.00
1534 Flush pipe with union spreaders and clamps all in C.P. brass for
range of three stall each 520.00
1535 Flush pipe with union spreaders and clamps all in C.P. brass for
range of four stall each 600.00
1540 Flush pipe and spreaders G.l. for single set of one squatting
plate urinal each 175.00
1541 Flush pipe and spreaders G.l. for range of two squatting plates urinal each 250.00
1542 Flush pipe and spreaders G.l. for range of three squatting plates urinal each 300.00
1543 Flush pipe and spreaders G.l. for range of four squatting plates urinal each 390.00
1614 G.I. inlet connection each 60.00
1616 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
75 mm dia each 950.00
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
100 mm dia each 1150.00
1620 S.C.I. plain bend 75 mm dia each 170.00
1621 S.C.I. plain bend 100 mm dia each 350.00
1624 S.C.I. bend with access door 75 mm dia each 200.00
1625 S.C.I. bend with access door 100 mm dia each 252.00
1627 S.C.I. plain single equal junctions 75x75x75 mm dia each 265.00
1628 S.C.I. plain single equal junctions 100x100x100 mm dia each 450.00
1630 S.C.I. single equal junctions 75x75x75 mm dia with access door each 278.00
1631 S.C.I. single equal junctions 100x100x100 mm dia with access door each 376.00
1633 S.C.I. plain double equal junctions 75x75x75x75 mm dia each 346.00
1634 S.C.I. plain double equal junctions 100x100x100x100 mm dia each 520.00
1636 S.C.I. double equal junctions 75x75x75x75 mm dia with access door each 425.00
1637 S.C.I. double equal junctions 100x100x100x100 mm dia with
access door each 550.00
1639 Slotted cowl (terminal guard) 75 mm dia each 151.00
1640 Slotted cowl (terminal guard) 100 mm dia each 190.00
1653 Sand cast iron S&S plain single unequal junctions: 100x100x
75 mm dia each 370.00
1656 Sand cast iron S&S single unequal junctions: 100x100x75 mm dia
with access door each 400.00
1659 Sand cast iron S&S plain double unequal junctions: 100x100x75x
75 mm dia each 550.00
1662 Sand cast iron S&S double unequal junctions: 100x100x75x75 mm
dia with access door each 550.00
1666 Sand cast iron heel rest bend 75 mm dia each 220.00
1667 Sand cast iron heel rest bend 100 mm dia each 250.00
1669 S.C.I. single equal invert branch of required degree 75x75x75 mm dia each 320.00
1670 S.C.I. single equal invert branch of required degree 100x100x
100 mm dia each 410.00
1672 S.C.I. double equal invert branch of required degree 75x75x75x
75 mm dia each 410.00
1673 S.C.I. double equal invert branch of required degree 100x100x
100x100 mm dia each 550.00
1674 S.C.I. single unequal invert branch of required degree 100x100x
75 mm dia each 495.00
1677 S.C.I. double unequal invert branch of required degree 100x100x
75x75 mm dia each 570.00
1682 S.C.I. door pieces 75 mm dia each 275.00
1683 S.C.I. door pieces 100 mm dia each 400.00
1685 S.C.I. collar 75 mm dia each 92.00
1686 S.C.I. collar 100 mm dia each 138.00
1863 Fire clay kitchen sink: 600x450x250 mm each 1300.00
1871 White vitreous china laboratory sink 450x300x150 mm each 820.00
1872 White vitreous china laboratory sink 600x450x200 mm each 1525.00
1875 White plastic seat (solid) with lid C.P. brass hinges and rubber buffers each 330.00
1876 Black plastic seat (solid) with lid C.P. brass hinges and rubber buffers each 310.00
1881 Spun yarn kilogram 50.00
1885 15 mm C.P. brass tap each 210.00
1889 C.P. brass toilet paper holder of standard size each 185.00
1891 C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 50 mm dia each 170.00
1893 C.I. trap for standard urinal with vent arm with operating and other
couplings in C.P. brass: 80 mm dia each 225.00
1895 C.P. brass trap 40 mm dia each 250.00
1896 100 mm S.C.I. trap with vent heel each 315.00
1897 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet each 275.00
1898 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet each 218.00
1913 Vitreous china lipped front urinal each 460.00
1915 Vitreous china squatting plate urinal each 1053.00
1947 Vitreous china flat back wash basin 630x450 mm each 725.00
1949 Vitreous china angle back wash basin 600x480 mm each 725.00
1950 Vitreous china angle back wash basin 400x400 mm each 425.00
1951 C.P. brass waste 32 mm each 80.00
1952 C.P. brass waste 40 mm each 95.00
1953 Vitreous china Indian type W.C. pan size 580 mm each 450.00
1954 Vitreous china orrisa type W.C. pan size 580 mm each 780.00
1955 Vitreous china pedestal type water closet each 700.00
1965 White vitreous china dual purpose closet (Anglo Indian W.C.) suitable
for use as squatting pan or European type water closet as per
manufacturer's specifications each 1300.00
1966 Floor mounted white vitrous china double trap syphonic WC with
10 litre cistern and all fittings & fixtures,seat cover etc each 9500.00
1970 Vitreous china foot rests 250x125x25 mm pair 100.00
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
2203 Carriage of Coarse sand cum 103.77
2205 Carriage of Steel tonne 92.24
2209 Carriage of Cement tonne 92.24
3213 Vitreous china Surgeon type wash basin of size 660x460 mm each 1000.00
3228 600x120 mm glass shelf with anodised aluminium angle frame,
C.P. brass brackets and guard rail of standard size each 250.00
3229 Vitreous china flat back wash basin 550x400 mm each 550.00
3617 C.P. Brass union 40mm dia each 195.00
3620 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long:
100 mm dia each 1196.00
3621 C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long:
75 mm dia each 1035.00
3624 S.C.I. S&S bends with access door 100 mm dia each 290.00
3625 S.C.I. S&S bends with access door 75 mm dia each 240.00
3628 S.C.I. S&S bend 100 mm dia each 265.00
3629 S.C.I. S&S bend 75 mm dia each 195.00
3634 S.C.I. S&S heel rest sanitary bend 100 mm dia each 296.00
3635 S.C.I. S&S heel rest sanitary bend 75 mm dia each 250.00
3640 S.C.I. S&S single equal junctions 100x100x100 mm each 472.00
3641 S.C.I. S&S single equal junctions 75x75x75 mm each 330.00
3644 S.C.I. S&S single equal junctions with access door 100x100x 100 mm each 495.00
3645 S.C.I. S&S single equal junctions with access door 75x75x75 mm each 373.00
3650 S.C.I. S&S double equal junctions 100x100x100x100 mm each 620.00
3651 S.C.I. S&S double equal junctions 75x75x75x75 mm each 462.00
3654 S.C.I. S&S double equal junctions with access door 100x100x
100x100 mm each 615.00
3655 S.C.I. S&S double equal junctions with access door 75x75x75x
75 mm each 480.00
3660 S.C.I. S&S single unequal junctions 100x100x75 mm each 570.00
3664 S.C.I. S&S single unequal junctions with access door 100x100x
75 mm each 640.00
3670 S.C.I. S&S double unequal junctions 100x100x75x75 mm each 800.00
3674 S.C.I. S&S double unequal junctions with access door 100x100x
75x75 mm each 850.00
3681 S.C.I. S&S single equal invert branch of required degree 100x
100x100 mm dia each 425.00
3682 S.C.I. S&S single equal invert branch of required degree 75x75x
75 mm dia each 323.00
3685 S.C.I. S&S double equal invert branch of required degree 100x
100x100x100 mm dia each 530.00
3686 S.C.I. S&S double equal invert branch of required degree 75x75x
75x75 mm dia each 425.00
3690 S.C.I. S&S single unequal invert branch of required degree 100x
100x75 mm dia each 545.00
3695 S.C.I. S&S double unequal invert branch of required degree 100x
100x75x75 mm dia each 725.00
3699 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 225.00
3707 S.C.I. S&S, 150 mm offset for 75 mm dia pipe each 285.00
3708 S.C.I. S&S, 150 mm offset for 100 mm dia pipe each 390.00
3712 S.C.I. S&S, 114 mm offset for 75 mm dia pipe each 300.00
3713 S.C.I. S&S, 114 mm offset for 100 mm dia pipe each 383.00
3716 S.C.I. S&S, 152 mm offset for 75 mm dia pipe each 358.00
3717 S.C.I. S&S, 152 mm offset for 100 mm dia pipe each 455.00
3728 S.C.I. S&S door pieces 100 mm dia each 400.00
3729 S.C.I. S&S door pieces 75 mm dia each 295.00
3733 S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm each 264.00
3734 S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm each 210.00
3738 S.C.I. S&S, collars 100 mm each 279.00
3739 S.C.I. S&S, collars 75 mm each 170.00
3746 S.C.I. S&S, 75 mm offset for 75 mm dia pipe each 218.00
3747 S.C.I. S&S, 75 mm offset for 100 mm dia pipe each 363.00
3749 Vitreous china toilet paper holder of standard size each 100.00
4202 Red oxide Zinc chromate primer litre 65.00
7004 Vitreous china flat back wash basin 450x300 mm each 325.00
7005 Vitreous china 10 litres low level cistern without fittings each 750.00
7006 Vitreous china 10 litres low level cistern with fittings each 1300.00
7048 Rawl plug 50 mm (designation 10 nos) each 10.00
7072 Wall mounted water closet of size 780x370x690 mm each 4650.00
7073 Adjustable Vitreous China Cistern with fittings of flushing capacity
3litre/6 litre (adjustable to 4 litre/8 litre ) each 2000.00
7074 White Vitreous China Waterless Urinal of size 600 x 330x315 mm each 10105.00
7075 Cistern with fittings for Waterless Urinal each 2400.00
7076 Battery based infrared sensor operated White Vitreous Urinal of
approx size 610 x 390 x 370 mm each 4000.00
7095 Stainless steel kitchen sink - with drain board bowl depth 250 mm each 2600.00
7096 Stainless steel kitchen sink - with drain board 510 x 1040 mm
bowl depth 225 mm each 2350.00
7097 Stainless steel kitchen sink - with drain board 510 x 1040 mm
bowl depth 200 mm each 2300.00
7098 Stainless steel kitchen sink - with drain board 510x1040 mm
bowl depth 178 mm each 2250.00
7101 Stainless steel kitchen sink - without drain board 610x510 mm
bowl depth 200 mm each 1500.00
7102 Stainless steel kitchen sink - without drain board 610x460 mm
bowl depth 200 mm each 1250.00
7103 Stainless steel kitchen sink - without drain board 470x420 mm
bowl depth 178 mm each 1100.00
7104 Coloured Orissa pattern W.C. pan 580x440 mm each 980.00
7105 Coloured Pedestal type W.C. pan 580x440 mm (European type) each 900.00
7106 Coloured Vitreous china 10 lit. low level cistern each 1100.00
7107 Coloured (other than black) solid P.V.C. seat in European W.C. pan each 405.00
7112 Circular shape 450 mm dia Mirror with Plastic moulded frame each 450.00
7113 Rectangular shape 453x357 mm Mirror with Plastic moulded frame each 300.00
7114 Oval shape 450x350 mm (outer dimensions) Mirror with Plastic
moulded frame each 350.00
7115 Rectangular shape 1500x450 mm Mirror with Plastic moulded frame each 700.00
7116 Hard board 6 mm thick sqm 120.00
7117 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with
length not less than 700 mm i/c PVC waste fittings each 30.00
7118 Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with
length not less than 700 mm i/c PVC waste fittings each 35.00
7119 Flexible (coil shaped) PVC waste pipe for sink and wash basin
32 mm dia with length not less than 700 mm i/c PVC waste fittings each 28.00
7120 Flexible (coil shaped) PVC waste pipe for sink and wash basin
40 mm dia with length not less than 700 mm i/c PVC waste fittings each 30.00
7121 Bottle Trap each 650.00
7122 CP Brass Single lever telephonic wall mixer of approved make of
aproved make each 4000.00
7123 Coloured High density polyethylene / poly propylene 10 lit. (full
flush) capacity controlled low level flushing cistern with fittings each 540.00
7126 White Vitreous china 10 litre (full flush) capacity controlled low level
flushing cistern with all fittings each 800.00
7127 Coloured Vitreous china 10 litre (full flush) capacity controlled low
level flushing cistern with all fittings each 1200.00
7358 Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with
fittings, accessories and flush pipe) each 600.00
7359 P.V.C. automatic flushing cistern 5 litre capacity each 490.00
7361 P.V.C. automatic flushing cistern 10 litre capacity each 530.00
7363 15 mm C.P. brass tap with elbow operation lever each 450.00
7364 White glazed fire clay draining board 600x450x25 mm each 550.00
7375 G.I. flush pipe and C.P. brass spreader including C.P. connecting
pipe Single lipped urinal each 465.00
7376 G.I. flush pipe and C.P. brass spreader including C.P. connecting
pipe Range of two lipped urinals each 800.00
7377 G.i. flush pipe and C.P. brass spreader including C.P. connecting
pipe Range of three lipped urinals each 1100.00
7378 G.I. flush pipe and C.P. brass spreader including C.P. connecting
pipe Range of four lipped urinals each 1500.00
7379 White vitreous china clay half stall urinal flat back 580x380x350 mm
or angle back 450x375x350 mm with waste fittings as per IS:2556 each 907.00
7406 PTMT pillar cock each 129.00
7491 PTMT - Waste Coupling 31/32 mm each 36.00
7492 PTMT - Waste Coupling 38/40 mm each 50.00
7493 PTMT - Bottle Trap 31/32 mm each 218.00
7494 PTMT - Bottle Trap 38/40 mm each 228.00
7503 PTMT Liquid Soap Container of 400 ml capacity each 107.00
7504 PTMT - Towel Ring 215x200x37 mm each 135.00
7505 PTMT - Towel Rail (450 mm) each 141.00
7506 PTMT - Towel Rail (600 mm) each 169.00
7507 PTMT Shelf 450x124x36 mm each 210.00
7508 PTMT - Urinal Spreader 15 mm each 80.00
7621 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm
dia (3000 mm length pipe) metre 729.00
7622 Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm
dia (3000 mm length pipe) metre 597.00
7623 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 -
100 mm dia each 241.00
7624 Hubless centrifugally cast (spun) iron plain bend as per IS 15905 -
75 mm dia each 164.00
7625 Hubless centrifugally cast (spun) iron double equal plain junction as
per IS 15905 - 100x100x100x100 mm dia each 532.00
7626 Hubless centrifugally cast (spun) iron double equal plain junction as
per IS 15905 - 75x75x75x75 mm dia each 286.00
7627 Hubless centrifugally cast (spun) iron single equal plain junction as
per IS 15905 - 100x100x100 mm dia each 410.00
7628 Hubless centrifugally cast (spun) iron single equal plain junction as
per IS 15905 - 75x75x75 mm dia each 225.00
7629 Hubless centrifugally cast (spun) iron double unequal plain junction
as per IS 15905 - 100x100x75x75 mm dia each 421.00
7630 Hubless centrifugally cast (spun) iron single unequal plain junction
as per IS 15905 - 100x100x75 mm dia each 392.00
7631 Hubless centrifugally cast (spun) iron double equal plain invert branch
as per IS 15905 - 100x100x100x100 mm dia each 653.00
7632 Hubless centrifugally cast (spun) iron single equal plain invert branch
as per IS 15905 - 100x100x100 mm dia each 410.00
7633 Hubless centrifugally cast (spun) iron single equal plain invert branch
as per IS 15905 - 75x75x75 mm dia each 270.00
7634 Hubless centrifugally cast (spun) iron single unequal plain invert
branch 45 degree as per IS 15905 - 100x100x75 mm dia each 450.00
7735 Ductile Iron Class K- 7 pipe conforming to I.S. 8329 - 1000 mm dia metre 17032.00
7736 Extruded burnt flyash clay sewer bricks conforming to I.S 4885 1000 Nos 5400.00
7737 Fly ash bricks conforming to I.S. 12894 1000 Nos 5800.00
7738 Calcium Silicate Bricks machine moulded conforming to I.S. 4139 1000 Nos 5700.00
7639 Hubless centrifugally cast (spun) iron bend with access door - 100
mm dia as per IS 15905 each 380.00
7640 Hubless centrifugally cast (spun) iron bend with access door - 75
mm dia as per IS 15905 each 303.00
7641 Hubless centrifugally cast (spun) iron terminal guard (slotted cowl) -
100 mm dia as per IS 15905 each 283.00
7642 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and
100 mm outlet as per IS 15905 each 560.00
7643 Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75
mm outlet as per IS 15905 each 404.00
7644 SS 304 grade shielded coupling with EPDM rubber gasket for 100
mm dia Hubless centrifugally cast (spun) iron each 287.00
7645 SS 304 grade shielded coupling with EPDM rubber gasket for 75 mm
dia Hubless centrifugally cast (spun) iron each 262.00
7805 Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan
724 mm X 578 mm each 3600.00
7806 Salem Stainless steel AISI - 304 (18/8) Round basin 405mm X
355 mm each 1500.00
7807 Salem Stainless steel AISI - 304 (18/8) Wash basin 530mm X
345 mm each 1500.00
7808 Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet each 435.00
7809 Centrifugally cast (spun) iron S&S 100 mm inlet and 75 mm outlet each 468.00
7858 P.T.M.T. Urinal cock 15 mm dia each 110.00
9001 CP brass centre Hole Basin mixer with cast spout each 1200.00
9977 Carriage L.S. 1.73
9988 Carriage and sundries L.S. 1.73
9999 Sundries L.S. 1.73
17.5 Providing and fixing white vitreous china flat back half stall urinal of
size 580x380x350 mm with white PVC automatic flushing cistern,
with fittings, standard size C.P. brass flush pipe, spreaders with
unions and clamps (all in C.P. brass) with waste fitting as per IS :
2556, C.I. trap with outlet grating and other couplings in C.P. brass,
including painting of fittings and cutting and making good the walls
and floors wherever required :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic flushing
cistern each 6187.40
17.5.2 Range of two half stall urinals with 5 litre P.V.C. automatic
flushing cistern each 9317.60
17.5.3 Range of three half stall urinals with 10 litre P.V.C.
automatic flushing cistern each 11694.90
17.5.4 Range of four half stall urinals with 10 litre P.V.C. automatic
flushing cistern each 13941.75
17.6 Providing and fixing one piece construction white vitreous china
squatting plate with an integral longitudinal flushing pipe, white P.V.C.
automatic flushing cistern, with fittings, standard size G.I. / PVC
flush pipe for back and front flush with standard spreader pipes with
fittings, G.I clamps and C.P. brass coupling complete, including
painting of fittings and cutting and making good the walls and floors
etc. wherever required :
17.6.1 Single squatting plate with 5 litre P.V.C. automatic flushing
cistern each 4887.50
17.6.2 Range of two squatting plates with 5 litre P.V.C. automatic
flushing cistern each 7257.40
17.6.3 Range of three squatting plates with 10 litre P.V.C.
automatic flushing cistern each 9650.15
17.6.4 Range of four squatting plates with 10 litre P.V.C. automatic
flushing cistern each 11723.85
17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass
pillar taps, 32 mm C.P. brass waste of standard pattern, including
painting of fittings and brackets, cutting and making good the walls
wherever require:
17.7.1 White Vitreous China Wash basin size 630x450 mm with
a pair of 15 mm C.P. brass pillar taps each 2298.55
17.7.2 White Vitreous China Wash basin size 630x450 mm with
a single 15 mm C.P. brass pillar tap each 2020.60
17.7.3 White Vitreous China Wash basin size 550x400 mm with
a pair of 15 mm C.P. brass pillar taps each 2095.30
17.7.4 White Vitreous China Flat back wash basin size 550x
400 mm with single 15 mm C.P. brass pillar tap each 1817.35
17.7.5 White Vitreous China Angle back wash basin size 600 x
480 mm with single 15 mm C.P. brass pillar tap each 2020.60
17.7.6 White Vitreous China Angle back wash basin size 400 x
400 mm with single 15 mm C.P. brass pillar tap each 1672.15
17.7.7 White Vitreous China Flat back wash basin size 450x
300 mm with single 15 mm C.P. brass pillar tap each 1556.00
17.7.8 White Vitreous China Surgeon type wash basin of size
660x460 mm with a pair of 15 mm C.P. brass pillar taps
with elbow including operated levers each 3175.50
17.7.9 White Vitreous China Surgeon type wash basin of size
660x460 mm with single 15 mm C.P. brass pillar taps
with elbow operated levers ISi marked each 2618.75
17.7.10 Stainless Steel AISI-304(18/8) Round basin 405x355 mm
with single 15 mm C.P. brass pillar tap each 2920.75
17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm
with single 15 mm C.P. brass pillar tap each 2920.75
17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia
CP Brass single hole basin mixer of approved quality and
make, including painting of fittings and brackets, cutting and
making good the walls wherever required:-
(a) White Vitreous China Wash basin size 550x400 mm with a
15 mm CP Brass single hole basin mixer each 2984.20
17.7B Providing and fixing wash basin with C.I. brackets, 15 mm
PTMT pillar cock, 32 mm PTMT waste coupling of standard
pattern, including painting of fittings and brackets, cutting and
making good the walls wherever required. White Vitreous
China Flat back wash basin size 550x400 mm with single
15 mm PTMT pillar cock. each 1706.20
17.8 Providing and fixing white vitreous china pedestal for wash basin
completely recessed at the back for the reception of pipes and fittings. each 975.25
17.9 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain
with rubber plug, 40 mm C.P. brass waste complete, including painting
the fittings and brackets, cutting and making good the walls wherever
required:
17.9.1 White glazed fire clay kitchen sink of size 600x450x 250
mm each 2433.25
17.10 Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as
per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,
including painting of fittings and brackets, cutting and making good
the walls wherever required :
17.19 Providing and fixing controlled flush, low level cistern made of vitreous
china with all fittings complete.
17.19.1 10 litre (full flush) capacity-white each 1452.90
17.19.2 10 litre (full flush) capacity-coloured each 1917.50
17.20 Providing and fixing solid plastic seat with lid for pedestal type W.C.
pan complete :
17.20.1 White solid plastic seat with lid each 410.20
17.20.2 Black solid plastic seat with lid each 386.95
17.20.3 Coloured (other than black & white) solid plastic seat
with lid each 497.30
17.22 Providing and fixing G.I. inlet connection for flush pipe connecting
with W.C. pan. each 96.60
17.22A Providing and fixing CP Brass 32mm size Bottle Trap of
approved quality & make and as per the direction of Engineer-
in-charge. each 795.15
17.22B Providing and fixing CP Brass Single lever telephonic wall
mixer of quality & make as approved by Engineer in charge.
(a) 15 mm nominal dia each 4715.75
17.23 Providing and fixing white vitreous china flat back or wall corner type
lipped front urinal basin of 430x260x350 mm or 340x410x265 mm
sizes respectively. each 930.75
17.24 Providing and fixing white vitreous china squatting plate urinal with
integral rim longitudinal flush pipe. each 2264.75
17.25 Providing and fixing white vitreous china wash basin including making
all connections but excluding the cost of fittings :
17.25.1 Flat back wash basin of size 630x450 mm each 969.30
17.25.2 Flat back wash basin of size 550x400 mm each 766.05
17.25.3 Angle back wash basin of size 600x480 mm each 969.30
17.25.4 Angle back wash basin of size 400x400 mm each 620.85
17.25.5 Flat back wash basin of size 450x300 mm each 504.70
17.25.6 Surgeon type wash basin of size 660x460 mm each 1288.70
17.26 Providing and fixing kitchen sink including making all connections
excluding cost of fittings.
17.26.1 White glazed fire clay sink of size 600x450x250 mm each 1612.90
17.27 Providing and fixing white vitreous china laboratory sink including
making all connections excluding cost of fittings :
17.27.1 Size 450x300x150 mm each 1055.35
17.27.2 Size 600x450x200 mm each 1874.20
17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including
P.V.C. waste fittings complete.
17.28.1 Semi rigid pipe
17.28.1.1 32 mm dia each 75.60
17.28.1.2 40 mm dia each 81.40
17.28.2 Flexible pipe
17.28.2.1 32 mm dia each 73.25
17.28.2.2 40 mm dia each 75.60
17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. each 29.25
17.30 Providing and fixing in position 25 mm diameter mosquito proof
coupling of approved municipal design. each 38.50
17.31 Providing and fixing 600x450 mm beveled edge mirror of superior
glass (of approved quality) complete with 6 mm thick hard board
ground fixed to wooden cleats with C.P. brass screws and washers
complete. each 817.95
17.32 Providing and fixing mirror of superior glass (of approved quality) and
of required shape and size with plastic moulded frame of approved
make and shade with 6 mm thick hard board backing :
17.32.1 Circular shape 450 mm dia each 905.00
17.32.2 Rectangular shape 453x357 mm each 752.80
17.32.3 Oval shape 450x350 mm (outer dimensions) each 809.50
17.32.4 Rectangular shape 1500x450 mm each 1323.10
17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,
supported on anodised aluminium angle frame with C.P. brass
brackets and guard rail complete fixed with 40 mm long screws, rawl
plugs etc., complete. each 573.30
17.34 Providing and fixing toilet paper holder :
17.34.1 C.P. brass each 385.35
17.34.2 Vitreous china each 295.45
17.35 Providing and fixing soil, waste and vent pipes :
17.35.1 100 mm dia
17.35.1.1 Sand cast iron S&S pipe as per IS: 1729 metre 862.80
17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe
as per IS: 3989 metre 921.65
17.35.1.3 Hubless centrifugally cast (spun) iron pipes epoxy
coated inside & outside IS:15905 metre 925.55
17.35.2 75 mm diameter :
17.35.2.1 Sand cast iron S&S pipe as per IS: 1729 metre 712.20
17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 metre 794.55
17.35.2.3 Hubless centrifugally cast (spun) iron pipes epoxy
coated inside & outside IS:15905 metre 759.80
17.36 Providing and filling the joints with spun yarn, cement slurry and
cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :
17.36.1 75 mm dia pipe each 72.95
17.36.2 100 mm dia pipe each 85.95
17.37 Providing and fixing M.S. holder-bat clamps of approved design to
Sand Cast iron/cast iron (spun) pipe embedded in and including
cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2
coarse sand : 4 graded stone aggregate 20 mm nominal size),
including cost of cutting holes and making good the walls etc. :
17.39.2 75 mm dia
17.39.2.1 Sand cast iron S&S as per IS -1729 each 219.15
17.39.2.2 Sand cast iron S&S as per IS - 3989 each 248.20
17.41 Providing and fixing double equal junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete :
17.41.1 100x100x100x100 mm
17.41.1.1 Sand cast iron S&S as per IS - 1729 each 686.65
17.41.1.2 Sand cast iron S&S as per IS - 3989 each 762.15
17.41.2 75x75x75x75 mm
17.43 Providing and fixing single equal plain junction of required degree
with access door, insertion rubber washer 3 mm thick, bolts and
nuts complete.
17.43.1 100x100x100 mm
17.43.1.1 Sand cast iron S&S as per IS - 1729 each 484.80
17.43.1.2 Sand cast iron S&S as per IS - 3989 each 623.00
17.43.2 75x75x75 mm
17.43.2.1 Sand cast iron S&S as per IS - 1729 each 362.00
17.43.2.2 Sand cast iron S&S as per IS - 3989 each 472.35
17.44 Providing and fixing single equal plain junction of required degree :
17.44.1 100x100x100 mm
17.44.1.1 Sand cast iron S&S as per IS - 1729 each 549.85
17.44.1.2 Sand cast iron S&S as per IS - 3989 each 575.40
17.44.1.3 Hubless centrifugally cast (spun) iron epoxy
coated inside & outside as per IS:15905 each 503.40
17.44.2 75x75x75 mm
17.44.2.1 Sand cast iron S&S as per IS - 1729 each 329.50
17.44.2.2 Sand cast iron S&S as per IS - 3989 each 405.00
17.44.2.3 Hubless centrifugally cast (spun) Iron
epoxy coated inside & outside as per IS:15905 each 283.05
17.45 Providing and fixing double unequal junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete:
17.45.1 100x100x75x75 mm
17.45.1.1 Sand cast iron S&S as per IS - 1729 each 686.90
17.45.1.2 Sand cast iron S&S as per IS - 3989 each 1035.35
17.46 Providing and fixing double unequal plain junction of required degree:
17.46.1 100x100x75x75 mm
17.46.1.1 Sand cast iron S&S as per IS - 1729 each 666.00
17.46.1.2 Sand cast iron S&S as per IS - 3989 each 956.35
17.46.1.3 Hubless centrifugally cast (spun) iron
epoxy coated inside & outside as per
IS:15905 each 516.15
17.47 Providing and fixing single unequal junction of required degree with
access door, insertion rubber washer 3 mm thick, bolts and nuts
complete :
17.47.1 100x100x75 mm
17.47.1.1 Sand cast iron S&S as per IS - 1729 each 512.65
17.47.1.2 Sand cast iron S&S as per IS - 3989 each 791.45
17.48 Providing and fixing single unequal plain junction of required
degree :
17.48.1 100x100x75 mm
17.48.1.1 Sand cast iron S&S as per IS - 1729 each 456.90
17.48.1.2 Sand cast iron S&S as per IS - 3989 each 689.20
17.48.1.3 Hubless centrifugally cast (spun) iron
epoxy coated inside & outside as per
IS:15905 each 482.45
17.49 Providing and fixing double equal plain invert branch of required
degree:
17.49.1 100x100x100x100 mm
17.49.1.1 Sand cast iron S&S as per IS - 1729 each 666.00
17.49.1.2 Sand cast iron S&S as per IS 3989 each 642.75
17.49.1.3 Hubless centrifugally cast (spun) iron
epoxy coated inside & outside as per
IS:15905 each 785.60
17.49.2 75x75x75x75 mm
17.49.2.1 Sand cast iron S&S as per IS - 1729 each 497.90
17.49.2.2 Sand cast iron S&S as per IS - 3989 each 515.35
17.50 Providing and fixing single equal plain invert branch of required degree :
17.50.1 100x100x100 mm
17.50.1.1 Sand cast iron S&S as per iron 1729 each 503.40
17.50.1.2 Sand cast iron S&S as per IS - 3989 each 520.80
17.50.1.3 Hubless centrifugally cast (spun) iron
epoxy coated inside & outside as per
IS:15905 each 503.40
17.50.2 75x75x75 mm
17.50.2.1 Sand cast iron S&S as per IS - 1729 each 393.35
17.55 Providing and fixing door piece, insertion rubber washer 3mm thick,
bolts & nuts complete :
17.55.1 100 mm
17.55.2 75 mm
17.56.1 100 mm
17.56.2 75 mm
17.57.1 100 mm
17.57.2 75 mm
17.62 Painting C.I. cistern with bitumastic or any other anti-corrosive paint
inside and white paint over a coat of zinc chromate yellow primer (of
approved quality ) on the outside surface of the cistern, flush pipe,
other fittings, etc. complete for new work. each 471.75
17.63 Re-painting C.I. cistern with bitumastic or any other anti-corrosive
paint inside and white paint on the outside surface of the cistern,
flush pipe, other fittings, etc. complete, including polishing of wooden
seat and lid and cleaning of W.C. pan with acid wherever necessary. each 328.40
17.64 Repainting C.I. cistern with synthetic enamel paint of approved colour,
brand and manufacture on the outside surface of cistern, flush pipe,
other fittings etc. complete. each 140.30
17.65 Painting sand cast iron/ centrifugally cast (spun) iron soil, waste
vent pipes and fittings with two coats of synthetic enamel paint of
any colour such as chocolate grey, or buff etc. over a coat of primer
(of approved quality) for new work :
17.65.1 100 mm diameter pipe metre 40.65
17.65.2 75 mm diameter pipe metre 31.00
17.66 Repainting sand cast iron/ centrifugally cast iron (spun) iron, soil,
waste, vent pipes and fittings with one coat of synthetic enamel
paint of any colour such as chocolate, grey or buff etc :
17.66.1 100 mm diameter pipe metre 20.20
17.66.2 75 mm diameter pipe metre 15.10
17.67 Repainting bath tub of size 1700x730x430 mm with enamel paint. each 412.55
17.68 Providing and fixing vitreous china dual purpose closet suitable for
use as squatting pan or European type water closet (Anglo Indian
W.C pan) with seat & lid fixed with C.P. brass hinges and rubber
buffers, 10 litre low level flushing cistern with fitting and brackets, 40
mm flush bend, 20 mm over flow pipe, with specials of standard
make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required:
17.68.1 White vitreous china dual purpose WC pan with white
solid plastic seat and lid with white vitreous china flushing
cistern and C.P. flush bend. each 6290.85
17.69 Providing and fixing PTMT Waste Coupling for wash basin and sink,
of approved quality and colour.
17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm
breadth weighing not less than 45 gms each 82.55
17.69.2 Waste coupling 38 mm dia of 83 mm length and 77mm
breadth, weighing not less than 60 gms each 98.80
17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.
17.70.1 Bottle trap 31mm single piece moulded with height of
270 mm, effective length of tail pipe 260 mm from the
centre of the waste coupling, 77 mm breadth with 25 mm
minimum water seal, weighing not less than 260 gms each 293.95
17.78 Providing and fixing white vitreous china extended wall mounting
water closet of size 780x370x690 mm of approved shape including
providing & fixing white vitreous china cistern with dual flush fitting,
of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),
including seat cover, and cistern fittings, nuts, bolts and gasket etc
complete. each 9685.70
17.79 Providing & fixing white vitreous china water less urinal of size 600 x
330 x 315 mm having antibacterial /germs free ceramic surface,
fixed with cartridge having debris catcher and hygiene seal. each 15040.75
17.80 Providing and fixing white vitreous china battery based infrared sensor
operated urinal of approx. size 610 x 390 x 370 mm having pre &
post flushing with water (250 ml & 500 ml consumption), having
water inlet from back side, including fixing to wall with suitable
brackets all as per manufacturers specification and direction of
Engineer-in-charge. each 5162.20
17.81 Providing and fixing floor mounted, white vitreous china single
piece, double traps syphonic water closet of approved brand/
make, shape, size and pattern including integrated white
vitreous china cistern of capacity 10 litres with dual flushing
system, including all fittings and fixtures with seat cover, cistern
fittings, nuts, bolts and gasket etc including making connection
with the existing P/S trap, complete in all respect as per
directions of Engineer-in-Charge. each 12612.65
WATER SUPPLY
308
BASIC RATES (SH: 18.0 WATER SUPPLY)
Code Description Unit Rate
No.
1470 Flanged C.I. standard specials over 300 mm dia (heavy class) quintal 5500.00
1472 Casing pipe 100 mm dia metre 335.00
1545 G.I. pipes 15 mm dia metre 77.00
1546 G.I. pipes 20 mm dia metre 99.00
1547 G.I. pipes 25 mm dia metre 110.00
1548 G.I. pipes 32 mm dia metre 145.00
1549 G.I. pipes 40 mm dia metre 185.00
1550 G.I. pipes 50 mm dia metre 220.00
1551 G.I. pipes 65 mm dia metre 295.00
1552 G.I. pipes 80 mm dia metre 400.00
1555 G.I. back (jam) nuts 25 mm dia each 8.00
1559 G.I. back (jam) nuts 65 mm dia each 20.00
1608 G.I. tees (equal) 25 mm each 40.00
1612 G.I. tees (equal) 65 mm each 250.00
1641 G.I. Union 15 mm nominal bore each 30.00
1642 G.I. Union 20 mm nominal bore each 50.00
1643 G.I. Union 25 mm nominal bore each 80.00
1644 G.I. Union 32 mm nominal bore each 110.00
1645 G.I. Union 40 mm nominal bore each 160.00
1646 G.I. Union 50 mm nominal bore each 200.00
1647 G.I. Union 65 mm nominal bore each 400.00
1648 G.I. Union 80 mm nominal bore each 470.00
1649 Polyethylene water storage tank with cover and suitable locking
arrangement per litre 5.30
1687 Unplasticised P.V.C. connection pipe with brass union 30 cm long
15 mm bore each 30.00
1688 Unplasticised P.V.C. connection pipe with brass union 30 cm long
20 mm bore each 35.00
1689 Unplasticised P.V.C. connection pipe with brass union 45 cm long
15 mm bore each 35.00
1690 Unplasticised P.V.C. connection pipe with brass union 45 cm long
20 mm bore each 48.00
1693 S.C.I. hand pump each 670.00
1878 Shower rose C.P. brass for 15 to 20 mm inlet 100 mm dia each 50.00
1879 Shower rose C.P. brass for 15 to 20 mm inlet 150 mm dia each 60.00
1881 Spun yarn kilogram 50.00
1882 Strainer brass 40 mm dia 1.5 metre long each 600.00
1922 H.P. or L.P. ball valve with polythene floats: 15 mm dia each 210.00
1923 H.P. or L.P. ball valve with polythene floats: 20 mm dia each 235.00
1924 H.P. or L.P. ball valve with polythene floats: 25 mm dia each 230.00
1926 20 mm dia Gunmetal gate valve with wheel each 325.00
1927 Brass full way valve with C.I. wheel (screwed end) 25 mm dia each 350.00
1928 Brass full way valve with C.I. wheel (screwed end) 32 mm dia each 410.00
1929 Brass full way valve with C.I. wheel (screwed end) 40 mm dia each 480.00
1930 Brass full way valve with C.I. wheel (screwed end) 50 mm dia each 620.00
1931 Brass full way valve with C.I. wheel (screwed end) 65 mm dia each 1080.00
1932 Brass full way valve with C.I. wheel (screwed end) 80 mm dia each 1620.00
1933 Gunmetal non-return valve-horizontal (screwed end) 25 mm dia each 330.00
1934 Gunmetal non-return valve-horizontal (screwed end) 32 mm dia each 450.00
1935 Gunmetal non-return valve-horizontal (screwed end) 40 mm dia each 560.00
1936 Gunmetal non-return valve-horizontal (screwed end) 50 mm dia each 820.00
1937 Gunmetal non-return valve-horizontal (screwed end) 65 mm dia each 1490.00
1938 Gunmetal non-return valve-horizontal (screwed end) 80 mm dia each 2120.00
1940 C.I. sluice valve (with caps) class I: 100 mm dia each 2410.00
1941 C.I. sluice valve (with caps) class I : 125 mm dia each 2600.00
1942 C.I. sluice valve (with caps) class I: 150 mm dia each 3600.00
1943 C.I. sluice valve (with caps) class I : 200 mm dia each 7500.00
1944 C.I. sluice valve (with caps) class I : 250 mm dia each 10980.00
1945 C.I. sluice valve (with caps) class I: 300 mm dia each 15500.00
1956 Bolts and nuts 16 mm dia 60 mm long each 11.00
1957 Bolts and nuts 16 mm dia 65 mm long each 12.00
1958 Bolts and nuts 20 mm dia 65 mm long each 15.00
1959 Bolts and nuts 20 mm dia 70 mm long each 17.00
1960 Bolts and nuts 20 mm dia 75 mm long each 16.00
1961 Bolts and nuts 20 mm dia 80 mm long each 18.00
1962 Bolts and nuts 24 mm dia 85 mm long each 28.00
1963 Bolts and nuts 24 mm dia 90 mm long each 32.00
1964 Bolts and nuts 27 mm dia 100 mm long each 38.00
2271 Carriage of G.I. pipes below 100 mm dia tonne 92.24
2272 Carriage of Stainless Steel pipes below 100 mm dia tonne 92.24
2309 Carriage of Cast Iron fittings tonne 92.24
2319 Carriage of Spun iron S & S pipes 100 mm dia 100 metre 226.82
2320 Carriage of Spun iron S & S pipes 125 mm dia 100 metre 302.97
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 378.03
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 614.93
2323 Carriage of Spun iron S & S pipes 250 mm dia 100 metre 873.84
2324 Carriage of Spun iron S & S pipes 300 mm dia 100 metre 1080.08
2325 Carriage of Spun iron S & S pipes 350 mm dia 100 metre 1512.11
2326 Carriage of Spun iron S & S pipes 400 mm dia 100 metre 2061.97
2327 Carriage of Spun iron S & S pipes 450 mm dia 100 metre 2520.19
2328 Carriage of Spun iron S & S pipes 500 mm dia 100 metre 2520.19
2329 Carriage of Spun iron S & S pipes 600mm dia 100 metre 3780.28
2330 Carriage of C.I. pipes 500 mm dia 100 metre 2520.19
2331 Carriage of R.C.C. pipes 900 mm dia 100 metre 5670.42
2332 Carriage of R.C.C. pipes 1000 mm dia 100 metre 7560.57
2333 Carriage of R.C.C. pipes 1100 mm dia 100 metre 7560.57
2334 Carriage of R.C.C. pipes 1200 mm dia 100 metre 7560.57
2335 Carriage of Jamuna sand cum 103.77
2341 Carriage of Pig lead tonne 92.24
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre 226.82
2344 Carriage of Cast iron pipes 150 mm dia 100 metre 378.03
2345 Carriage of Cast iron pipes 200 mm dia 100 metre 614.93
2346 Carriage of Cast iron pipes 250 mm dia 100 metre 873.84
2347 Carriage of Cast iron pipes 300 mm dia 100 metre 1080.08
2348 Carriage of Cast iron pipes 350 mm dia 100 metre 1512.11
2349 Carriage of Cast iron pipes 400 mm dia 100 metre 2061.97
2350 Carriage of Cast iron pipes 450 mm dia 100 metre 2520.19
2351 Carriage of Cast iron pipes 500 mm dia 100 metre 2520.19
2352 Carriage of Cast iron pipes 600 mm dia 100 metre 3780.28
2353 Carriage of Cast iron pipes 700 mm dia 100 metre 3780.28
2355 Carriage of Cast iron pipes 800 mm dia 100 metre 3780.28
2356 Carriage of Cast iron pipes 900 mm dia 100 metre 5670.42
2357 Carriage of Cast iron pipes 1000 mm dia 100 metre 7560.57
3080 Gunmetal non-return valve - vertical (screwed end) 25 mm dia each 350.00
3084 Gunmetal non-return valve - vertical (screwed end) 32 mm dia each 500.00
3088 Gunmetal non-return valve - vertical (screwed end) 40 mm dia each 700.00
3092 Gunmetal non-return valve - vertical (screwed end) 50 mm dia each 900.00
3096 Gunmetal non-return valve - vertical (screwed end) 65 mm dia each 1500.00
3300 Gunmetal non-return valve - vertical (screwed end) 80 mm dia each 2500.00
3311 C.I. sluice valve (with caps) class II : 100 mm dia each 2700.00
3314 C.I. sluice valve (with caps) class II : 125 mm dia each 3200.00
3317 C.I. sluice valve (with caps) class II : 150 mm dia each 4000.00
3320 C.I. sluice valve (with caps) class II : 200 mm dia each 8900.00
3321 C.I. sluice valve (with caps) class II : 250 mm dia each 14500.00
3326 C.I. sluice valve (with caps) class II : 300 mm dia each 18200.00
3327 15 mm Battery Based Sensor Pillar Cock each 5800.00
6501 Sand zone V (Jamuna) cum 600.00
7257 C.P. Brass bibcock 15 mm each 300.00
7258 C.P. Brass long nose bibcock 15 mm each 450.00
7259 C.P. Brass long body bibcock 15 mm each 400.00
7260 C.P. Brass stop cock (concealed) 15 mm each 450.00
7261 C.P. Brass angle valve 15 mm each 390.00
7400 15 mm PTMT bib cock each 75.00
7401 15 mm PTMT bib cock with flange (fancy) each 110.00
7402 15 mm PTMT bib cock long body with flange each 122.00
7403 15 mm dia PTMT stop cock (male thread) each 75.00
7405 20 mm dia PTMT stop cock each 102.00
7406 PTMT pillar cock each 129.00
7407 PTMT push cock 15 mm dia each 65.00
7408 PTMT push cock 12 mm dia 20 mm BSP each 60.00
7409 PTMT grating 100 mm dia each 21.00
7410 PTMT Pillar cock (fancy) 15 mm foam flow each 144.00
7411 125 mm grating with waste hole each 32.00
7412 Rectangular type with openable circular lid 150 mm size 18 mm
high with 100 mm dia (110 gm) each 122.00
7415 Double acting air valve 50 mm each 3900.00
7416 Double acting air valve 80 mm each 4750.00
7417 Double acting air valve 100 mm each 6200.00
7418 Water meter (including testing charges) 80 mm each 2130.00
7419 Water meter (including testing charges) 100 mm each 3300.00
7420 Water meter (including testing charges) 150 mm each 5000.00
7421 Water meter (including testing charges) 200 mm each 5400.00
7422 Dirt box strainer 80 mm each 2810.00
7423 Dirt box strainer 100 mm each 4580.00
7424 Dirt box strainer 150 mm each 5810.00
7425 Dirt box strainer 200 mm each 8250.00
7495 PTMT Ball Cock 15mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball each 105.00
7496 PTMT Ball Cock 20mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball each 140.00
7497 PTMT Ball Cock 25mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball each 300.00
7498 PTMT Ball Cock 40mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball each 501.00
7499 PTMT Ball Cock 50mm complete with Epoxy Coated Aluminium
Rod & H.D. Ball each 913.00
7500 PTMT Angle Stop cock with Flange 15 mm each 102.00
7501 PTMT Swiveling shower 15 mm each 75.00
7509 PTMT Soap Dish/Holder 138x102x75 mm each 85.00
7651 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia metre 800.00
7652 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 150 mm dia metre 1200.00
7653 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 200 mm dia metre 1650.00
7654 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia metre 2300.00
7655 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 300 mm dia metre 2860.00
7656 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia metre 3510.00
7657 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 400 mm dia metre 4500.00
7658 Ductile Iron class K - 9 pipe Conforming to 1.S. 8329 - 450 mm dia metre 5200.00
7659 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia metre 6580.00
7660 Ductile Iron class K -9 pipe Conforming to I.S. 8329 - 600 mm dia metre 7930.00
7661 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia metre 11000.00
7662 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia metre 11900.00
7663 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia metre 12000.00
7664 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900 mm dia metre 14500.00
7665 Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 1000 mm dia metre 16300.00
7666 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 100 mm dia each 30.00
7668 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 150 mm dia each 38.00
7669 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 200 mm dia each 66.00
7670 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm dia each 78.00
7671 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 300 mm dia each 115.00
7672 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 350 mm dia each 132.00
7673 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 400 mm dia each 240.00
7674 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 450 mm dia each 280.00
7675 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 500 mm dia each 305.00
7676 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 600 mm dia each 380.00
7677 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 700 mm dia each 575.00
7678 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 750 mm dia each 690.00
7679 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 800 mm dia each 760.00
7680 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 900 mm dia each 1000.00
7681 Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 1000 mm dia each 1200.00
8795 Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe each 187.00
8796 Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe each 190.00
8797 Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe each 359.00
8798 Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe each 362.00
8799 Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe each 362.00
8800 Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe each 387.00
8801 Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe each 410.00
8802 Reducer for 48.60 mm X 22.22 mm outer Dia SS pipe each 410.00
8803 Reducer for 48.60 mm X 28.58 mm outer Dia SS pipe each 410.00
8804 Reducer for 48.60 mm X 34.00 mm outer Dia SS pipe each 410.00
8805 Reducer for48.60 mm X 42.70 mm outer Dia SS pipe each 410.00
8806 Slip Coupling / Socket 15.88 mm outer dia SS pipe each 47.00
8807 Slip Coupling / Socket 22.22 mm outer dia SS pipe each 63.00
8808 Slip Coupling / Socket 28.58 mm outer dia SS pipe each 89.00
8809 Slip Coupling / Socket 34.00 mm outer dia SS pipe each 131.00
8810 Slip Coupling / Socket 42.70 mm outer dia SS pipe each 158.00
8811 Slip Coupling / Socket 48.60 mm outer dia SS pipe each 170.00
8812 Elbow 90 for 15.88 mm outer dia SS pipe each 58.00
8813 Elbow 90 for 22.22 mm outer dia SS pipe each 63.00
8814 Elbow 90 for 28.58 mm outer dia SS pipe each 96.00
8815 Elbow 90 for 34.00 mm outer dia SS pipe each 109.00
8816 Elbow 90 for 42.70 mm outer dia SS pipe each 116.00
8817 Elbow 90 for 48.60 mm outer dia SS pipe each 150.00
8818 Reducing Elbow 90 for 22.22 mm X 15.88 mm outer dia SS pipe each 148.00
8819 Reducing Elbow 90 for 28.58 mm X 15.88 mm outer dia SS pipe each 191.00
8820 Reducing Elbow 90 for 28.58 mm X 22.22 mm outer dia SS pipe each 221.00
8821 Reducing Elbow 90 for 34.00 mm X 22.22 mm outer dia SS pipe each 287.00
8822 Reducing Elbow 90 for 34.00 mm X 28.58 mm outer dia SS pipe each 396.00
8823 Reducing Elbow 90 for 42.70 mm X 34.00 mm outer dia SS pipe each 179.00
8824 Equal Tee for 15.88 mm outer dia SS pipe each 159.00
8825 Equal Tee for 22.22 mm outer dia SS pipe each 231.00
8826 Equal Tee for 28.58 mm outer dia SS pipe each 273.00
8827 Equal Tee for 34.00 mm outer dia SS pipe each 437.00
8828 Equal Tee for 42.70 mm outer dia SS pipe each 683.00
8829 Equal Tee for 48.60 mm outer dia SS pipe each 887.00
8830 Reducing Tee for 22.22 mm X 15.88 mm outer dia SS each 179.00
8831 Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe each 273.00
8832 Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe each 273.00
8833 Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe each 437.00
8834 Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe each 437.00
8835 Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe each 437.00
8836 Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe each 683.00
8837 Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe each 683.00
8838 Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe each 683.00
8839 Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe each 683.00
8840 Reducing Tee for 48.60 mm X 15.88 mm outer dia SS pipe each 887.00
8841 Reducing Tee for 48.60 mm X 22.22 mm outer dia SS pipe each 887.00
8842 Reducing Tee for 48.60 mm X 28.58 mm outer dia SS pipe each 887.00
8843 Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe each 887.00
8844 Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe each 887.00
8845 Stainless steel Male thread Tee for 15.88 mm outer dia X 15 mm
nominal dia threaded each 179.00
8846 Stainless steel Male thread Tee for 22.22 mm outer dia X 15 mm
nominal dia threaded each 200.00
8847 Stainless steel Male thread Tee for 22.22 mm outer dia X 20 mm
nominal dia threaded each 205.00
8848 Stainless steel Male thread Tee for 28.58 mm outer dia X 15 mm
nominal dia threaded each 273.00
8849 Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mm
nominal dia threaded each 273.00
8850 Stainless steel Male thread Tee for 28.58 mm outer dia X 25 mm
nominal dia threaded each 273.00
8851 Stainless steel Male thread Tee for 34.00 mm outer dia X 15 mm
nominal dia threaded each 437.00
8852 Stainless steel Male thread Tee for 34.00 mm outer dia X 20 mm
nominal dia threaded each 437.00
8853 Stainless steel Male thread Tee for 34.00 mm outer dia X 25 mm
nominal dia threaded each 437.00
8854 Stainless steel Male thread Tee for 34.00 mm outer dia X 32 mm
nominal dia threaded each 437.00
8855 Stainless steel Male thread Tee for 42.70 mm outer dia X 15 mm
nominal dia threaded each 683.00
8856 Stainless steel Male thread Tee for 42.70 mm outer dia X 20 mm
nominal dia threaded each 683.00
8857 Stainless steel Male thread Tee for 42.70 mm outer dia X 25 mm
nominal dia threaded each 683.00
8858 Stainless steel Male thread Tee for 42.70 mm outer dia X 32 mm
nominal dia threaded each 683.00
8859 Stainless steel Male thread Tee for 42.70 mm outer dia X 40 mm
nominal dia threaded each 683.00
8860 Stainless steel Male thread Tee for 48.60 mm outer dia X 15 mm
nominal dia threaded each 887.00
8861 Stainless steel Male thread Tee for 48.60 mm outer dia X 20 mm
nominal dia threaded each 887.00
8862 Stainless steel Male thread Tee for 48.60 mm outer dia X 25 mm
nominal dia threaded each 887.00
8863 Stainless steel Male thread Tee for 48.60 mm outer dia X 32 mm
nominal dia threaded each 887.00
8864 Stainless steel Male thread Tee for 48.60 mm outer dia X 40 mm
nominal dia threaded each 887.00
8865 Stainless steel Male thread Tee for 48.60 mm outer dia X 50 mm
nominal dia threaded each 887.00
8866 Stainless steel Female thread Tee for 15.88 mm outer dia X 15 mm
nominal dia threaded each 179.00
8867 Stainless steel Female thread Tee for 22.22 mm outer dia X 15 mm
nominal dia threaded each 200.00
8868 Stainless steel Female thread Tee for 22.22 mm outer dia X 20 mm
nominal dia threaded each 200.00
8869 Stainless steel Female thread Tee for 28.58 mm outer dia X 15 mm
nominal dia threaded each 273.00
8870 Stainless steel Female thread Tee for 28.58 mm outer dia X 20 mm
nominal dia threaded each 273.00
8871 Stainless steel Female thread Tee for 28.58 mm outer dia X 25 mm
nominal dia threaded each 273.00
8872 Stainless steel Female thread Tee for 34.00 mm outer dia X 15 mm
nominal dia threaded each 437.00
8873 Stainless steel Female thread Tee for 34.00 mm outer dia X 20 mm
nominal dia threaded each 437.00
8874 Stainless steel Female thread Tee for 34.00 mm outer dia X 25 mm
nominal dia threaded each 437.00
8875 Stainless steel Female thread Tee for 34.00 mm outer dia X 32 mm
nominal dia threaded each 437.00
8876 Stainless steel Female thread Tee for 42.70 mm outer dia X 15 mm
nominal dia threaded each 683.00
8877 Stainless steel Female thread Tee for 42.70 mm outer dia X 20 mm
nominal dia threaded each 683.00
8878 Stainless steel Female thread Tee for 42.70 mm outer dia X 25 mm
nominal dia threaded each 683.00
8879 Stainless steel Female thread Tee for 42.70 mm outer dia X 32 mm
nominal dia threaded each 683.00
8880 Stainless steel Female thread Tee for 42.70 mm outer dia X 40 mm
nominal dia threaded each 683.00
8881 Stainless steel Female thread Tee for 48.60 mm outer dia X 15 mm
nominal dia threaded each 887.00
8882 Stainless steel Female thread Tee for 48.60 mm outer dia X 20 mm
nominal dia threaded each 887.00
8883 Stainless steel Female thread Tee for 48.60 mm outer dia X 25 mm
nominal dia threaded each 887.00
8884 Stainless steel Female thread Tee for 48.60 mm outer dia X 32 mm
nominal dia threaded each 887.00
8885 Stainless steel Female thread Tee for 48.60 mm outer dia X 40 mm
nominal dia threaded each 887.00
8886 Stainless steel Female thread Tee for 48.60 mm outer dia X 50 mm
nominal dia threaded each 887.00
8887 Stainless steel Female threaded Connector/Adapter for 15.88 mm
outer dia X 15 mm nominal threaded each 190.00
8888 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded each 230.00
8889 Stainless steel Female threaded Connector/Adapter for 22.22 mm
outer dia X 20 mm nominal threaded each 237.00
8890 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 15 mm nominal threaded each 277.00
8891 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal threaded each 286.00
8892 Stainless steel Female threaded Connector/Adapter for 28.58 mm
outer dia X 25 mm nominal threaded each 337.00
8893 Stainless steel Female threaded Connector/Adapter for 34.00 mm
outer dia X 25 mm nominal threaded each 409.00
8894 Stainless steel Female threaded Connector/Adapter for 34.00 mm
outer dia X 32 mm nominal threaded each 538.00
8895 Stainless steel Female threaded Connector/Adapter for 42.70 mm
outer dia X 32 mm nominal threaded each 576.00
8896 Stainless steel Female threaded Connector/Adapter for 42.70 mm
outer dia X 40 mm nominal threaded each 681.00
8897 Stainless steel Female threaded Connector/Adapter for 48.60 mm
outer dia X 40 mm nominal threaded each 838.00
8898 Stainless steel Female threaded Connector/Adapter for 48.60 mm
outer dia X 50 mm nominal threaded each 965.00
8899 Stainless steel Male threaded Connector/Adapter for 15.88 mm outer
dia X 15 mm nominal threaded each 193.00
8900 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 15 mm nominal threaded each 227.00
8901 Stainless steel Male threaded Connector/Adapter for 22.22 mm
outer dia X 20 mm nominal threaded each 248.00
8902 Stainless steel Male threaded Connector/Adapter for 28.58 mm
outer dia X 20 mm nominal threaded each 313.00
8925 Stainless steel Female Threaded Elbow 90O for 48.60 mm outer
dia X 50 mm nominal dia threaded each 683.00
O
8926 Stainless steel Male Threaded Elbow 90 for 15.88 mm outer
dia X 15 mm nominal dia threaded each 191.00
8927 Stainless steel Male Threaded Elbow 90O for 22.22 mm outer dia X
15 mm nominal dia threaded each 205.00
O
8928 Stainless steel Male Threaded Elbow 90 for 22.22 mm outer dia X
20 mm nominal dia threaded each 205.00
O
8929 Stainless steel Male Threaded Elbow 90 for 28.58 mm outer dia X
25 mm nominal dia threaded each 205.00
O
8930 Stainless steel MaleThreaded Elbow 90 for 34.00 mm outer dia X
25 mm nominal dia threaded each 287.00
8931 Stainless steel Male Threaded Elbow 90O for 34.00 mm outer dia X
32 mm nominal dia threaded each 287.00
O
8932 Stainless steel Male Threaded Elbow 90 for 42.70 mm outer dia X
32 mm nominal dia threaded each 478.00
O
8933 Stainless steel Male Threaded Elbow 90 for 42.70 mm outer dia X
40 mm nominal dia threaded each 478.00
O
8934 Stainless steel Male Threaded Elbow 90 for 48.60 mm outer dia X
40 mm nominal dia threaded each 683.00
8935 Stainless steel Male Threaded Elbow 90O for 48.60 mm outer dia X
50 mm nominal dia threaded each 683.00
8936 Stainless steel Cap for 15.88 mm outer dia pipe each 45.00
8937 Stainless steel Cap for 22.22 mm outer dia pipe each 64.00
8938 Stainless steel Cap for 28.58 mm outer dia pipe each 84.00
8939 Stainless steel Cap for 34.00 mm outer dia pipe each 173.00
8940 Stainless steel Cap for 42.70 mm outer dia pipe each 253.00
8941 Stainless steel Cap for 48.60 mm outer dia pipe each 330.00
8942 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 214.00
8943 Stainless steel Pipe Bridge for 15.88 mm outer dia pipe each 271.00
8944 Stainless steel Pipe Bridge for 28.58 mm outer dia pipe each 407.00
9977 Carriage L.S. 1.73
9988 Carriage and sundries L.S. 1.73
9999 Sundries L.S. 1.73
External work
18.3.1 1216 (16 mm OD) pipe metre 161.40
18.3.2 1620 (20 mm OD ) pipe metre 185.55
18.3.3 2025 (25 mm OD ) pipe metre 233.90
18.3.4 2532 (32 mm OD ) pipe metre 304.85
18.3.5 3240 (40 mm OD ) pipe metre 434.40
18.3.6 4050 (50 mm OD ) pipe metre 577.85
C.P.V.C. PIPES
18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, including fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings
with one step CPVC solvent cement and testing of joints complete
as per direction of Engineer in Charge.
Internal work - Exposed on wall
18.7.1 15 mm nominal outer dia Pipes metre 142.95
18.7.2 20 mm nominal outer dia Pipes metre 179.95
18.7.3 25 mm nominal outer dia Pipes metre 216.20
18.7.4 32 mm nominal outer dia Pipes metre 289.05
18.7.5 40 mm nominal outer dia Pipes metre 385.50
18.7.6 50 mm nominal outer dia Pipes metre 548.55
18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply, including all
CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps
at 1.00 m spacing. This includes jointing of pipes & fittings with one
step CPVC solvent cement and the cost of cutting chases and making
good the same including testing of joints complete as per direction
of Engineer in Charge.
Concealed work, including cutting chases and making good the
walls etc.
18.8.1 15 mm nominal outer dia Pipes metre 246.20
18.8.2 20 mm nominal outer dia Pipes metre 284.85
18.8.3 25 mm nominal outer dia Pipes metre 333.60
18.8.4 32 mm nominal outer dia Pipes metre 412.90
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold water supply including all
CPVC plain & brass threaded fittings This includes jointing of pipes
& fittings with one step CPVC solvent cement, trenching, refilling &
testing of joints complete as per direction of Engineer in Charge.
External work
18.9.1 15 mm nominal outer dia Pipes metre 120.65
18.9.2 20 mm nominal outer dia Pipes metre 149.30
18.9.3 25 mm nominal outer dia Pipes metre 191.65
18.9.4 32 mm nominal outer dia Pipes metre 250.55
18.9.5 40 mm nominal outer dia Pipes metre 321.15
18.9.6 50 mm nominal outer dia Pipes metre 484.25
18.9.7 62.50 mm nominal inner dia Pipes metre 1081.75
18.9.8 75 mm nominal inner dia Pipes metre 1201.05
18.9.9 100 mm nominal inner dia Pipes metre 1618.10
18.9.10 150 mm nominal inner dia Pipes metre 2408.75
18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps,
i/c cutting and making good the walls etc.
Internal work - Exposed on wall
18.10.1 15 mm dia nominal bore metre 186.40
18.10.2 20 mm dia nominal bore metre 224.15
18.10.3 25 mm dia nominal bore metre 247.85
18.10.4 32 mm dia nominal bore metre 308.35
18.10.5 40 mm dia nominal bore metre 394.15
18.10.6 50 mm dia nominal bore metre 472.40
18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,
i/c making good the walls etc. concealed pipe, including painting
with anti corrosive bitumastic paint, cutting chases and making good
the wall :
18.11.1 15 mm dia nominal bore metre 285.70
18.11.2 20 mm dia nominal bore metre 316.20
18.12 Providing and fixing G.I. pipes complete with G.I. fittings including
trenching and refilling etc.
External work
18.12.1 15 mm dia nominal bore metre 160.20
18.12.2 20 mm dia nominal bore metre 186.30
18.12.3 25 mm dia nominal bore metre 205.85
18.12.4 32 mm dia nominal bore metre 247.40
18.12.5 40 mm dia nominal bore metre 301.05
18.12.6 50 mm dia nominal bore metre 342.70
18.12.7 65 mm dia nominal bore metre 451.70
18.12.8 80 mm dia nominal bore metre 576.30
18.13 Making connection of G.I. distribution branch with G.I. main of following
sizes by providing and fixing tee, including cutting and threading the
pipe etc. complete :
18.13.1 25 to 40 mm nominal bore each 394.15
18.13.2 50 to 80 mm nominal bore each 771.20
18.14 Fixing water meter and stop cock in G.I. pipe line including cutting
and threading the pipe and making long screws etc. complete (cost
of water meter and stop cock to be paid separately). Each 347.70
BRASS FITTINGS
18.15 Providing and fixing brass bib cock of approved quality :
18.15.1 15 mm nominal bore each 260.10
18.15.2 20 mm nominal bore each 280.40
18.16 Providing and fixing brass stop cock of approved quality :
18.16.1 15 mm nominal bore each 260.10
18.16.2 20 mm nominal bore each 280.40
18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved
quality (screwed end) :
18.17.1 25 mm nominal bore each 428.20
18.17.1A 20 mm nominal bore each 396.55
18.17.2 32 mm nominal bore. each 500.75
18.17.3 40 mm nominal bore each 584.70
18.17.4 50 mm nominal bore each 749.90
18.17.5 65 mm nominal bore each 1286.80
18.17.6 80 mm nominal bore each 1919.50
18.18 Providing and fixing ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete :
18.18.1 15 mm nominal bore each 287.25
18.18.2 20 mm nominal bore each 327.05
18.18.3 25 mm nominal bore each 331.95
18.19 Providing and fixing gun metal non- return valve of approved quality
(screwed end) :
18.19.1 25 mm nominal bore
18.19.1.1 Horizontal each 410.45
18.19.1.2 Vertical each 433.70
18.19.2 32 mm nominal bore
18.19.2.1 Horizontal each 552.45
18.19.2.2 Vertical each 610.55
18.26 Providing and laying flanged C.I. standard specials such as tees,
bends, collars, tapers, caps etc., suitable for flanged jointing as per
IS : 1538 :
18.26.1 Up to 300 mm dia quintal 6683.15
18.26.2 Over 300 mm dia quintal 6683.15
18.27 Providing and laying S&S centrifugally cast (spun) iron pipes (Class
LA) conforming to IS - 1536 :
18.27.1 100 mm dia pipe metre 1078.25
18.27.2 125 mm dia pipe metre 1343.80
18.27.3 150 mm dia pipe metre 1621.60
18.27.4 200 mm dia pipe metre 2750.55
18.27.5 250 mm dia pipe metre 3591.65
18.27.6 300 mm dia pipe metre 4841.60
18.27.7 350 mm dia pipe metre 5808.35
18.27.8 400 mm dia pipe metre 7649.30
18.27.9 450 mm dia pipe metre 9262.10
18.27.10 500 mm dia pipe metre 10753.40
18.27.11 600 mm dia pipe metre 15033.60
18.28 Providing lead caulked joints to spun iron or C.I. pipes and specials,
including testing of joints but excluding the cost of pig lead :
18.28.1 100 mm diameter pipe each 224.65
18.28.2 125 mm diameter pipe each 332.00
18.28.3 150 mm diameter pipe each 337.20
18.28.4 200 mm diameter pipe each 447.50
18.28.5 250 mm diameter pipe each 559.20
18.28.6 300 mm diameter pipe each 673.25
18.28.7 350 mm diameter pipe each 690.85
18.28.8 400 mm diameter pipe each 904.05
18.28.9 450 mm diameter pipe each 1013.90
18.28.10 500 mm diameter pipe each 1072.75
18.28.11 600 mm diameter pipe each 1449.40
18.29 Supplying pig lead at site of work. quintal 16039.40
18.30 Providing flanged joints to double flanged C.I./ D.I. pipes and specials,
including testing of joints :
18.30.1 80 mm diameter pipe each 119.55
18.30.2 100 mm diameter pipe each 193.85
18.30.3 125 mm diameter pipe each 205.45
18.30.4 150 mm diameter pipe each 243.05
18.47 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and
threading the pipe and making long screws, including excavation,
refilling the earth or cutting of wall and making good the same complete
wherever required :
18.47.1 15 mm nominal bore each 366.20
18.47.2 20 mm nominal bore each 389.45
18.47.3 25 mm nominal bore each 424.30
18.47.4 32 mm nominal bore each 459.15
18.47.5 40 mm nominal bore each 517.20
18.47.6 50 mm nominal bore each 682.85
18.47.7 65 mm nominal bore each 915.15
18.47.8 80 mm nominal bore each 996.45
18.48 Providing and placing on terrace (at all floor levels) polyethylene water
storage tank, IS : 12701 marked, with cover and suitable locking
arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank.
18.48A Circular tank per litre 7.25
18.48B Rectangular tank per litre 7.25
C.P. BRASS FITTINGS
18.49 Providing and fixing C.P. brass bib cock of approved quality conforming
to IS:8931 :
18.49.1 15 mm nominal bore each 371.70
18.50 Providing and fixing C.P. brass long nose bib cock of approved quality
conforming to IS standards and weighing not less than 810 gms.
18.50.1 15 mm nominal bore each 555.30
18.51 Providing and fixing C.P. brass long body bib cock of approved
quality conforming to IS standards and weighing not less than 690
gms.
18.51.1 15 mm nominal bore each 492.55
18.52 Providing and fixing C.P. brass stop cock (concealed) of standard
design and of approved make conforming to IS:8931.
18.52.1 15 mm nominal bore each 545.95
18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser
points of approved quality conforming to IS:8931
18.53.1 15mm nominal bore each 475.70
18.53A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm)
of approved make and quality as per direction of Engineer-in-charge. each 58.10
PTMT FITTINGS
18.54 Providing and fixing PTMT bib cock of approved quality and colour.
18.54.1 15mm nominal bore, 86 mm long, weighing not less than
88 gms each 103.30
18.54.2 15 mm nominal bore, 122mm long, weighing not less
than 99 gms each 143.95
18.54.3 15 mm nominal bore, 165 mm long, weighing not less
than 110 gms each 157.90
18.54.4 15 mm nominal bore, 90 mm long, weighing not less
than 93 gms each 113.75
18.55 Providing and fixing PTMT stop cock of approved quality and colour.
18.55.1 15 mm nominal bore, 86 mm long, weighing not less
than 88 gms each 103.30
18.55.2 20 mm nominal bore, 89 mm long, weighing not less
than 88 gms each 134.65
18.55.3 Concealed stop cock, 15 mm nominal bore, 108 mm
long, weighing not less than 108 gms each 161.40
18.56 Providing and fixing PTMT pillar cock of approved quality and colour
18.56.1 15 mm nominal bore, 107 mm long, weighing not less
than 110 gms each 168.90
18.56.2 15 mm nominal bore, 125 mm long foam flow, weighing
not less than 120 gms each 186.30
18.57 Providing and fixing PTMT, push cock of approved quality and colour.
18.57.1 15 mm nominal bore, 98 mm long, weighing not less
than 75 gms each 91.70
18.57.2 15 mm nominal bore, 80 mm long, weighing not less
than 46 gms each 85.90
18.58 Providing and fixing PTMT grating of approved quality and colour.
18.58.1 Circular type
18.58.1.1 100 mm nominal dia each 32.75
18.58.1.2 125 mm nominal dia with 25 mm waste hole each 45.55
18.58.2 Rectangular type with openable circular lid
18.58.2.1 150 mm nominal size square 100 mm
diameter of the inner hinged round grating each 150.05
AIR VALVE & WATER METER (BULK TYPE)
18.59 Providing and fixing C.I. double acting air valve of approved quality
with bolts, nuts, rubber insertions etc. complete (The tail pieces,
tapers etc if required will be paid separately) :
18.59.1 50 mm dia each 4662.45
18.59.2 80 mm dia each 5649.75
18.59.3 100 mm dia each 7410.80
18.60 Providing and fixing enclosed type water meter (bulk type) conforming
to IS : 2373 and tested by Municipal Board complete with bolts,
nuts, rubber insertions etc. (The tail pieces if required will be paid
separately) :
18.60.1 80 mm dia nominal bore each 3104.90
18.60.2 100 mm dia nominal bore each 4638.60
18.60.3 150 mm dia nominal bore each 6816.05
18.60.4 200 mm dia nominal bore each 7433.95
18.61 Providing and fixing C.I. dirt box strainer for bulk type water meter
with nuts, bolts, rubber insertions etc. complete conforming to IS :
2373 :
18.61.1 80 mm dia each 3633.50
18.61.2 100 mm dia each 5864.10
18.61.3 150 mm dia each 7443.40
18.61.4 200 mm dia each 10430.75
18.62 Providing and fixing PTMT Ball cock of approved quality, colour and
make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D.
plastic ball.
18.62.1 15 mm nominal bore, 105 mm long, weighing not less
than 138 gms each 165.30
18.62.2 20 mm nominal bore, 120 mm long, weighing not less
than 198 gms each 216.70
18.62.3 25 mm nominal bore, 152mm long, weighing not less
than 440 gms each 413.25
18.62.4 40 mm nominal bore, 206mm long, weighing not less
than 690 gms each 646.70
18.62.5 50 mm nominal bore, 242mm long, weighing not less
than 1240 gms each 1125.25
18.63 Providing and fixing PTMT angle stop cock 15 mm nominal bore,
weighing not less than 85 gms each 134.65
18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore,
weighing not less than 40 gms each 100.70
18.65 Providing and fixing PTMT soap Dish Holder having length of 138mm,
breadth 102mm, height of 75mm with concealed fitting arrangements,
weighing not less than 106 gms. each 112.30
18.66 Providing and laying S&S C.I. Standard specials such as tees,
bends, collars tapers and caps etc, suitable for flanged jointing as
per IS : 1538 :
18.66.1 Up to 300 mm dia quintal 6625.10
18.66.2 Above 300 mm dia quintal 7856.25
18.67 Providing and laying S&S C.I. Standard specials suitable for
mechanical jointing as per IS : 13382 :
18.67.1 Up to 300 mm dia quintal 10748.40
18.67.2 Above 300 mm dia quintal 11329.15
18.68 Providing and laying D.I. specials of class K-12 suitable for push-on
jointing as per IS : 9523 :
18.68.1 Up to 600 mm dia quintal 15394.40
18.68.2 Above 600 mm dia quintal 21201.90
18.69 Providing and laying D.I. Specials of Class K - 12 suitable for
mechanical jointing as per IS : 9523 :
18.69.1 Up to 600 mm dia quintal 16207.45
18.69.2 Above 600 mm dia quintal 23118.40
18.70 Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or
Ductile Iron Pipes including testing of joints and the cost of rubber
gasket :
18.70.1 100 mm dia pipes joint 65.10
18.70.2 150 mm dia pipes joint 102.35
18.70.3 200 mm dia pipes joint 154.30
18.70.4 250 mm dia pipes joint 187.65
18.70.5 300 mm dia pipes joint 250.00
18.70.6 350 mm dia pipes joint 269.75
18.70.7 400 mm dia pipes joint 434.00
18.70.8 450 mm dia pipes joint 499.90
18.70.9 500 mm dia pipes joint 538.65
18.70.10 600 mm dia pipes joint 693.70
18.70.11 650 mm dia pipes joint 966.75
18.70.12 700 mm dia pipes joint 1100.30
18.70.13 800 mm dia pipes joint 1212.70
18.70.14 900 mm dia pipes joint 1549.65
18.70.15 1000 mm dia pipes joint 1820.80
18.71 Providing and laying Double Flanged (screwed / welded) Centrifugally
(Spun) Cast Iron, Class B (IS : 1536) :
18.71.1 100 mm dia C.I. Double Flanged Pipe metre 1640.95
18.71.2 150 mm dia C.I. Double Flanged Pipe metre 2569.15
18.71.3 200 mm dia C.I. Double Flanged Pipe metre 4053.40
18.71.4 250 mm dia C.I. Double Flanged Pipe metre 4902.80
18.71.5 300 mm dia C.I. Double Flanged Pipe metre 6266.90
18.71.6 350 mm dia C.I. Double Flanged Pipe metre 7890.95
18.86 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304
as per JIS standard 3448 complete with press type fitting (fitting
shall be paid for separately) i/c fixing of the pipe with clamps at
1.00m spacing and also including cutting of chases and making
good the walls including testing of joints complete as per direction of
Engineer -in-charge. (The pipe length inserted in the fitting shall not
be measured for payment)
Internal work - Concealed Pipe
18.86.1 15.88 mm outer dia .Pipes. metre 348.30
18.86.2 22.22 mm Outer dia pipes metre 484.90
18.87 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Coupling/Socket
18.87.1 For 15.88 mm outer dia pipe each 48.80
18.87.2 For 22.22 mm outer dia pipe each 73.15
18.87.3 For 28.58 mm outer dia pipe each 103.35
18.87.4 For 34.00 mm outer dia pipe each 152.15
18.87.5 For 42.70 mm outer dia pipe each 183.50
18.87.6 For 48.60 mm outer dia pipe each 209.05
18.88 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming toJWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per dirction of Engineer-in-charge.
Reducer
18.88.1 For 22.22 mm x 15.88 mm outer dia pipe each 119.65
18.88.2 For 28.58 mm x 15.88 mm outer dia pipe each 163.75
18.88.3 For 28.58 mm x 22.22 mm outer dia pipe each 168.40
18.88.4 For 34.00 mm x 15.88 mm outer dia pipe each 213.70
18.88.5 For 34.00 mm x 22.22 mm outer dia pipe each 217.20
18.88.6 For 34.00 mm x 28.58 mm outer dia pipe each 220.70
18.88.7 For 42.70 mm x 15.88 mm outer dia pipe each 417.00
18.88.8 For 42.70 mm x 22.22 mm outer dia pipe each 420.45
18.88.9 For 42.70 mm x 28.58 mm outer dia pipe each 420.45
18.88.10 For 42.70 mm x 34.00 mm outer dia pipe each 449.50
18.92 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Equal Tee
18.92.1 For 15.88 mm outer dia pipe each 184.70
18.92.2 For 22.22 mm outer dia pipe each 268.30
18.92.3 For 28.58 mm outer dia pipe each 317.10
18.92.4 For 34.00 mm outer dia pipe each 507.60
18.92.5 For 42.70 mm outer dia pipe each 793.30
18.92.6 For 48.60 mm outer dia pipe each 1030.25
18.93 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Reducing Tee
18.93.1 For 22.22 mm x 15.88 mm outer dia pipe each 207.90
18.93.2 For 28.58 mm x 15.88 mm outer dia pipe each 317.10
18.93.3 For 28.58 mm x 22.22 mm outer dia pipe each 317.10
18.93.4 For 34.00 mm x 15.88 mm outer dia pipe each 507.60
18.93.5 For 34.00 mm x 22.22 mm outer dia pipe each 507.60
18.93.6 For 34.00 mm x 28.58 mm outer dia pipe each 507.60
18.93.7 For 42.70 mm x 15.88 mm outer dia pipe each 793.30
18.93.8 For 42.70 mm x 22.22 mm outer dia pipe each 793.30
18.93.9 For 42.70 mm x 28.58 mm outer dia pipe each 793.30
18.93.10 For 42.70 mm x 34.00 mm outer dia pipe each 793.30
18.93.11 For 48.60 mm x 15.88 mm outer dia pipe each 1030.25
18.93.12 For 48.60 mm x 22.22 mm outer dia pipe each 1030.25
18.93.13 For 48.60 mm x 28.58 mm outer dia pipe each 1030.25
18.93.14 For 48.60 mm x 34.00 mm outer dia pipe each 1030.25
18.93.15 For 48.60 mm x 42.70 mm outer dia pipe each 1030.25
18.94 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Male Thread Tee
18.94.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 207.90
18.94.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 232.30
18.94.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 238.10
18.94.4 For 28.58 mm outer dia x 15 mm nominal dia threaded each 317.10
18.94.5 For 28.58 mm outer dia x 20 mm nominal dia threaded each 317.10
18.94.6 For 28.58 mm outer dia x 25 mm nominal dia threaded each 317.10
18.94.7 For 34.00 mm outer dia x 15 mm nominal dia threaded each 507.60
18.94.8 For 34.00 mm outer dia x 20 mm nominal dia threaded each 507.60
18.94.9 For 34.00 mm outer dia x 25 mm nominal dia threaded each 507.60
18.94.10 For 34.00 mm outer dia x 32 mm nominal dia threaded each 507.60
18.94.11 For 42.70 mm outer dia x 15 mm nominal dia threaded each 793.30
18.94.12 For 42.70 mm outer dia x 20 mm nominal dia threaded each 793.30
18.94.13 For 42.70 mm outer dia x 25 mm nominal dia threaded each 793.30
18.94.14 For 42.70 mm outer dia x 32 mm nominal dia threaded each 793.30
18.94.15 For 42.70 mm outer dia x 40 mm nominal dia threaded each 793.30
18.94.16 For 48.60 mm outer dia x 15 mm nominal dia threaded each 1030.25
18.94.17 For 48.60 mm outer dia x 20 mm nominal dia threaded each 1030.25
18.94.18 For 48.60 mm outer dia x 25 mm nominal dia threaded each 1030.25
18.94.19 For 48.60 mm outer dia x 32 mm nominal dia threaded each 1030.25
18.94.20 For 48.60 mm outer dia x 40 mm nominal dia threaded each 1030.25
18.94.21 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1030.25
18.95 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Female Thread Tee
18.95.1 For 15.88 mm outer dia x15 mm nominal dia threaded each 207.90
18.95.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 232.30
18.95.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 232.30
18.95.4 For 28.58 mm outer dia x 15 mm nominal dia threaded each 317.10
18.95.5 For 28.58 mm outer dia x 20 mm nominal dia threaded each 317.10
18.95.6 For 28.58 mm outer dia x 25 mm nominal dia threaded each 317.10
18.95.7 For 34.00 mm outer dia x 15 mm nominal dia threaded each 507.60
18.95.8 For 34.00 mm outer dia x 20 mm nominal dia threaded each 507.60
18.95.9 For 34.00 mm outer dia x 25 mm nominal dia threaded each 507.60
18.95.10 For 34.00 mm outer dia x 32 mm nominal dia threaded each 507.60
18.95.11 For 42.70 mm outer dia x 15 mm nominal dia threaded each 793.30
18.95.12 For 42.70 mm outer dia x 20 mm nominal dia threaded each 793.30
18.95.13 For 42.70 mm outer dia x 25 mm nominal dia threaded each 793.30
18.95.14 For 42.70 mm outer dia x 32 mm nominal dia threaded each 793.30
18.95.15 For 42.70 mm outer dia x 40 mm nominal dia threaded each 793.30
18.95.16 For 48.60 mm outer dia x 15 mm nominal dia threaded each 1030.25
18.95.17 For 48.60 mm outer dia x 20 mm nominal dia threaded each 1030.25
18.95.18 For 48.60 mm outer dia x 25 mm nominal dia threaded each 1030.25
18.95.19 For 48.60 mm outer dia x 32 mm nominal dia threaded each 1030.25
18.95.20 For 48.60 mm outer dia x 40 mm nominal dia threaded each 1030.25
18.95.21 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1030.25
18.96 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Female Thread Connector/ Adapter
18.96.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 220.70
18.96.2 For 22.22 mm outer dia x 15 mmnominal dia threaded each 267.15
18.96.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 275.30
18.96.4 For 28.58 mm outer dia x 15 mm nominal dia threaded each 321.75
18.96.5 For 28.58 mm outer dia x 20 mm nominal dia threaded each 332.20
18.96.6 For 28.58 mm outer dia x 25 mm nominal dia threaded each 391.45
18.96.7 For 34.00 mm outer dia x 25 mm nominal dia threaded each 475.05
18.96.8 For 34.00 mm outer dia x 32 mm nominal dia threaded each 624.90
18.96.9 For 42.70 mm outer dia x 32 mm nominal dia threaded each 669.00
18.96.10 For 42.70 mm outer dia x 40 mm nominal dia threaded each 791.00
18.96.11 For 48.60 mm outer dia x 40 mm nominal dia threaded each 973.35
18.96.12 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1120.85
18.97 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Male Thread Connector/ Adapter
18.97.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 224.15
18.97.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 263.65
18.97.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 288.05
18.97.4 For 28.58 mm outer dia x 20 mm nominal dia threaded each 363.55
18.97.5 For 28.58 mm outer dia x 25 mm nominal dia threaded each 371.70
18.97.6 For 34.00 mm outer dia x 25 mm nominal dia threaded each 535.45
18.97.7 For 34.00 mm outer dia x 32 mm nominal dia threaded each 656.25
18.97.8 For 42.70 mm outer dia x 32 mm nominal dia threaded each 753.80
18.97.9 For 42.70 mm outer dia x 40 mm nominal dia threaded each 843.25
18.97.10 For 48.60 mm outer dia x 40 mm nominal dia threaded each 975.65
18.97.11 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1321.80
18.98 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Valve Connector
18.98.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 271.80
18.98.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 320.55
18.98.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 342.65
18.98.4 For 28.58 mm outer dia x 25 mm nominal dia threaded each 492.50
18.98.5 For 34.00 mm outer dia x 32 mm nominal dia threaded each 730.60
18.98.6 For 42.70 mm outer dia x 40 mm nominal dia threaded each 1016.30
18.98.7 For 48.60 mm outer dia x 50 mm nominal dia threaded each 1365.90
18.99 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Female Threaded Elbow 90
18.99.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 174.25
18.99.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 221.85
18.99.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 221.85
18.99.4 For 25.58 mm outer dia x 25 mm nominal dia threaded each 238.10
18.99.5 For 34.00 mm outer dia x 32 mm nominal dia threaded each 333.35
18.99.6 For 42.70 mm outer dia x 32 mm nominal dia threaded each 555.20
18.99.7 For 42.70 mm outer dia x 40 mm nominal dia threaded each 555.20
18.99.8 For 48.60 mm outer dia x 40 mm nominal dia threaded each 793.30
18.99.9 For 48.60 mm outer dia x 50 mm nominal dia threaded each 793.30
18.100 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Male Threaded Elbow 90
18.100.1 For 15.88 mm outer dia x 15 mm nominal dia threaded each 221.85
18.100.2 For 22.22 mm outer dia x 15 mm nominal dia threaded each 238.10
18.100.3 For 22.22 mm outer dia x 20 mm nominal dia threaded each 238.10
18.100.4 For 28.58 mm outer dia x 25 mm nominal dia threaded each 238.10
18.100.5 For 34.00 mm outer dia x 25 mm nominal dia threaded each 333.35
18.100.6 For 34.00 mm outer dia x 32 mm nominal dia threaded each 333.35
18.100.7 For 42.70 mm outer dia x 32 mm nominal dia threaded each 555.20
18.100.8 For 42.70 mm outer dia x 40 mm nominal dia threaded each 555.20
18.100.9 For 48.60 mm outer dia x 40 mm nominal dia threaded each 793.30
18.100.10 For 48.60 mm outer dia x 50 mm nominal dia threaded each 793.30
18.101 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Cap
18.101.1 For 15.88 mm outer dia pipe each 52.25
18.101.2 For 22.22 mm outer dia pipe each 74.35
18.101.3 For 28.58 mm outer dia pipe each 97.55
18.101.4 For 34.00 mm outer dia pipe each 200.95
18.101.5 For 42.70 mm outer dia pipe each 293.85
18.101.6 For 48.60 mm outer dia pipe each 383.30
18.102 Providing and fixing required Stainless Steel Fitting of press fit design
of grade AISI 304 conforming to JWWA G116 standard with V-profile
or M-profile and with O-ring sealing gasket of EPDM material of
required dia as per direction of Engineer-in-charge.
Pipe Bridge
18.102.1 For 15.88 mm outer dia pipe each 248.55
18.102.2 For 22.22 mm outer dia pipe each 314.75
18.102.3 For 28.58 mm outer dia pipe each 472.75
DRAINAGE
349
BASIC RATES (SH: 19.0 DRAINAGE)
Code Description Unit Rate
No.
0101 Bhisti day 407.00
0103 Blacksmith 2nd class day 448.00
0114 Beldar day 368.00
0115 Coolie day 368.00
0123 Mason (brick layer) 1st class day 487.00
0124 Mason (brick layer) 2nd class day 448.00
0285 Brick Aggregate (Single size) : 63 mm nominal size cum 750.00
0287 Brick Aggregate (Single size) : 40 mm nominal size cum 750.00
0362 Brick bats cum 500.00
0367 Portland Cement (OPC-43 grade) tonne 5700.00
0983 Fine sand (zone IV) cum 760.00
1003 Mild steel round bar above 12 mm dia quintal 3575.00
1006 Mild steel square bars quintal 3675.00
1336 Clearing eye with chain and lid 100 mm dia each 44.00
1337 Clearing eye with chain and lid 150 mm dia each 50.00
1352 C.I. cover and frame 300x300 mm inside each 300.00
1353 C.I. cover without frame 300x300 mm inside i/c cover of 4.50 kg each 225.00
1354 Rectangular cover 455x610 mm with frame (low duty) each 1500.00
1355 Rectangular cover 455x610 mm without frame (low duty) each 1000.00
1356 500 mm dia cover with frame (medium duty) each 4750.00
1357 500 mm dia cover without frame (medium duty) each 2300.00
1364 C.I. grating 100x100 mm each 15.00
1366 C.I. grating 150x150 mm each 25.00
1367 C.I. grating 180x180 mm each 30.00
1617 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
100 mm dia each 1150.00
1618 S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:
150 mm dia each 1750.00
1621 S.C.I. plain bend 100 mm dia each 350.00
1622 S.C.I. plain bend 150 mm dia each 400.00
1628 S.C.I. plain single equal junctions 100x100x100 mm dia each 450.00
1700 R.C.C. pipes NP2 class 100 mm dia metre 200.00
2336 Carriage of R.C.C. pipe above 1200 mm dia and upto 1800 mm dia 100 metre 7560.57
2602 Common burnt clay F.P.S. (non modular) bricks class
designation 7.5 1000 Nos 4500.00
3860 560 mm dia cover with frame (Heavy duty) each 9000.00
3861 560 mm dia cover without frame (Heavy duty) each 5000.00
7087 S.C.I. Tee 150 mm each 600.00
7128 S.W. intercepting trap 100 mm dia each 190.00
7129 S.W. intercepting trap 150 mm dia each 250.00
7130 Rectangular shape 600x450 mm precast R.C.C. manhole cover
with frame - L.D. - 25 each 700.00
7131 Square shape 450x450 mm precast R.C.C. manhole cover with
frame - L.D. - 25 each 600.00
7132 Circular shape 450 mm dia precast R.C.C. manhole cover with
frame - L.D. - 25 each 600.00
7133 Rectangular shape 500x500 mm precast R.C.C. manhole cover
with frame - M.D. - 10 each 700.00
7134 Circular shape 500 mm dia precast R.C.C. manhole cover with
frame- M.D.-10 each 600.00
7135 Circular shape 560 mm dia precast R.C.C. manhole cover with
frame - H.D. - 20 each 920.00
7136 Circular shape 560 mm dia precast R.C.C. manhole cover with
frame - E.H.D. - 35 each 1225.00
7354 Plastic encapsulated M.S. foot rest 30x20x15 cm each 115.00
7380 Precast R.C.C. grating with frame 500x450 mm horizontal grating each 650.00
7381 Precast R.C.C. grating with frame 450x100 mm vertical grating each 245.00
8701 SS pipe 304 grades with fresh fit technology as per JIS 3448
standards. 48.60 mm outer dia metre 584.00
9977 Carriage L.S. 1.73
9988 Carriage and sundries L.S. 1.73
9999 Sundries L.S. 1.73
19.12 Extra depth for circular type manhole 1.22 m internal dia (at bottom)
beyond 1.68 m to 2.29 m :
19.12.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 metre 6362.65
19.12.2 With Sewer bricks conforming IS : 4885 metre 6505.15
19.13 Constructing brick masonry circular manhole 1.52 m internal dia at
bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement : 4
coarse sand) inside cement plaster 12 mm thick with cement mortar
1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat
cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 40 mm nominal size) and making necessary
channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement, all complete as per standard design :
19.13.1 2.30 m deep with SFRC Cover and frame (heavy duty HD-
20 grade designation) 560 mm internal diameter conform-
ing to I.S. 12592, total weight of cover and frame to be not
less than 182 kg. fixed in cement concrete 1:2:4 (1 ce-
ment : 2 coarse sand : 4 graded stone aggregate 20 mm
nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12 mm thick cement plaster at
the external surface shall be paid for separately) :
19.13.1.1 With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 each 35380.05
19.13.1.2 With Sewer bricks conforming IS : 4885 each 35845.05
19.14 Extra depth for circular type manhole 1.52 m internal dia (at bottom)
beyond 2.30 m :
19.14.1 With common burnt clay F.P.S. (non modular) bricks of
class designation 7.5 metre 15028.55
19.14.2 With Sewer bricks conforming IS : 4885 metre 15397.05
19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10
cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm nominal size) as per standard
design :
19.15.1 With 20x20 mm square bar each 267.95
19.15.2 With 20 mm diameter round bar each 240.25
19.16 Providing orange colour safety foot rest of minimum 6 mm thick
plastic encapsulated as per IS : 10910, on 12 mm dia steel bar
conforming to IS: 1786, having minimum cross section as 23 mmx25
mm and over all minimum length 263 mm and width as 165 mm with
minimum 112 mm space between protruded legs having 2 mm tread
on top surface by ribbing or chequering besides necessary and
adequate anchoring projections on tail length on 138 mm as per
standard drawing and suitable to with stand the bend test and
19.36 Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C.
pipes including collars/spigot jointed with stiff mixture of cement
mortar in the proportion of 1:2 (1 cement : 2 fine sand) including
testing of joints etc. complete
19.36.1 450 mm dia RCC pipes. metre 2211.25
19.36.2 600 mm dia RCC pipes. metre 2883.70
19.36.3 900 mm dia RCC pipes. metre 5525.50
19.36.4 1000 mm dia RCC pipes.(Laying by mannual/ machenical
means) metre 6856.65
19.36.5 1200 mm dia RCC pipes. (Laying by mannual/ machenical
means) metre 8165.25
19.36.6 1800 mm dia RCC pipes. (Laying by mannual/ machenical
means) metre 16648.75
PILE WORK
364
BASIC RATES (SH: 20.0 PILE WORK)
Code Description Unit Rate
No.
0015 Hire and running charges of Tripod and Mechanical Winch machine
complete with power unit and accessories day 2000.00
0017 Hire and running charges of tipper day 1800.00
0018 Hire and running charges of loader day 6000.00
0024 Hire and running charges of hydraulic piling rig with power unit etc.
including complete accessories and shifting at site day 34000.00
0025 Hire and running charges of light crane day 2500.00
0026 Hire and running charges of bentonite pump day 4200.00
0027 Hire and running charges of vibrating pile driving hammer complete
with power unit and accessories day 35000.00
0028 Hire and running charges of crane 20 tonne capacity day 9300.00
0080 Hire and running charges of of dril machine up to 400 mm dia
( including cost of mobile oil, diesel consumption in ordinary soil
and operator) day 7500.00
0081 Pile Integrity testing equipment day 3000.00
0114 Beldar day 368.00
0130 Mistry day 487.00
0160 Technician day 775.00
0161 Helper (Technician) day 368.00
7181 C.I. pile shoe of 80 kg per pile kilogram 50.00
7182 M.S. clamps for pile shoe of 35 kg per pile kilogram 45.00
7183 Bentonite tonne 3100.00
7246 Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification and up to 50
tonne capacity pile per test 33200.00
7247 Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification & above 50
tonne and up to 100 tonne per test 40300.00
7248 Vertical load testing (initial) of piles in accordance with IS : 2911
(Part-IV) including installation of loading platform and preparation
of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification & group of two
or more up to 50 tonne per test 48500.00
20.6 Vertical load testing of piles in accordance with IS 2911 (Part IV)
including installation of loading platform by Kentledge/Anchor piles
method and preparation of pile head or construction of test cap and
dismantling of test cap after test etc. complete as per specification
& the direction of Engineer in-charge.
Note: 1. Initial and Routine Load Test shall not be carried out by
Dynamic method of testing.
Note: 2. Testing agency shall submitt the design of loading platform
for the approval of Engineer-in-charge.
20.6.1 Single pile upto 50 tonne Safe capacity
20.6.1.1 Initial test (Test Load 2.5 times the Safe
capacity) per test 38561.80
20.6.1.2 Routine test (Test Load 1.5 times the Safe
capacity) per test 17422.50
20.6.2 Single pile above 50 tonne and upto 100 tonne Safe
capacity
20.6.2.1 Initial test (Test Load 2.5 times the Safe
capacity) per test 46808.45
20.6.2.2 Routine test (Test Load 1.5 times the Safe
capacity) per test 26714.50
20.6.3 Group of two or more piles upto 50 tonne Safe capacity
20.6.3.1 Initial test (Test Load 2.5 times the Safe
capacity) per test 56332.75
20.6.3.2 Routine test (Test Load 1.5 times the Safe
capacity) per test 34264.25
20.7 Cyclic vertical load testing of pile in accordance with IS Code of
practice IS: 2911 (part IV) by Kentledge method including preparation
of pile head etc for.
20.7.1 Single pile
20.7.1.1 Upto 50 tonne Safe capacity pile per test 17422.50
20.7.1.2 Above 50 tonne and upto 100 tonne Safe
capacity pile per test 26714.50
20.7.2 Group of two or more piles
20.7.2.1 Upto 400 tonne Safe capacity of group per test 34264.25
20.8 Lateral load testing of single pile in accordance with IS Code of
practice IS : 2911 (Part IV) for determining safe allowable lateral
load on pile :
20.8.1 Upto 50 tonne capacity pile per test 17422.50
20.8.2 Above 50 tonne and upto 100 tonne capacity pile per test 27411.40
20.9 Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic
Echo Test method in accordance with IS 14893 including surface
preparation of pile top by removing soil, mud, dust & chipping lean
concrete lumps etc. and use of computerised equipment and high
skill trained personal for conducting the test & submission of results,
all complete as per direction of Engineer-in-charge. per test 750.95
Note :- The inclusion of the above item in the schedule of work shall
be judiciously decided by the technical sanctioning authority,
keeping in view the quality control, type of soil strata & importance
of the project.
ALUMINIUM WORK
371
BASIC RATES (SH: 21.0 ALUMINIUM WORK)
Code Description Unit Rate
No.
0100 Bandhani day 407.00
0111 Carpenter 1st class day 487.00
0112 Carpenter 2nd class day 448.00
0114 Beldar day 368.00
0116 Fitter (grade 1) day 487.00
0119 Glazier day 448.00
0123 Mason (brick layer) 1st class day 487.00
0124 Mason (brick layer) 2nd class day 448.00
0139 Skilled Beldar (for floor rubbing etc.) day 407.00
0589 Chromium plated Brass screws 20 mm 100 Nos 170.00
0689 Anodised Aluminium butt hinges 100x75x4 mm 10 Nos 400.00
0992 Galvanised steel plain sheets quintal 5600.00
2406 Float glass sheet of nominal thickness 4 mm (weight not less
than 10 kg/sqm) sqm 286.00
2407 Float glass sheet of nominal thickness 5.5 mm (weight not less
than 13.50 kg/sqm) sqm 490.00
2408 Float glass sheet of nominal thickness 8 mm (weight not less
than 20.00 kg/sqm) sqm 605.00
2704 Aluminium Strip 40 mm wide and 2 mm thick kg 225.00
7001 Brass 100mm mortice latch and lock with 6 levers without pair
of handles each 220.00
7019 Dash fastener/chemical fastener each 15.00
7048 Rawl plug 50 mm (designation 10 nos) each 10.00
7306 Aluminium T or L sections kg 200.00
7313 Expandable fastener with plastic sleeve and MS screws. 32 mm long each 11.00
7347 Cadmium plated full threaded steel screws (30x4 mm dia) 100 Nos 28.00
7348 Aluminium washer 2 mm thick 15 mm dia 100 Nos 10.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 12.00
7389 Anodising 15 microns on aluminium sections kg 40.00
7390 EPDM Gasket for uPVC window/door metre 20.00
7391 Anodising 25 microns on aluminium sections kg 50.00
7392 Powder coating 50 microns on aluminium sections kg 64.00
7393 Polyester powder coating 50 microns on aluminium sections kg 70.00
7394 Double action hydraulic floor spring with stainless steel cover plate each 1550.00
7395 6 mm dia G.I. adjustable hangers including clips (up to 1.2 m length) each 20.00
7396 Double action hydraulic floor spring with brass cover plate each 1700.00
WATER PROOFING
378
BASIC RATES (SH : 22.0 WATER PROOFING)
Code Description Unit Rate
No.
0002 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper day 800.00
0012 Vibrator (needle type 40 mm) day 350.00
0101 Bhisti day 407.00
0114 Beldar day 368.00
0115 Coolie day 368.00
0123 Mason (brick layer) 1st class day 487.00
0124 Mason (brick layer) 2nd class day 448.00
0125 Mason (for plain stone work) 2nd class day 448.00
0128 Mate day 407.00
0130 Mistry day 487.00
0131 Painter day 448.00
0155 Mason (average) day 467.00
0159 Skilled torch operator for laying tack day 487.00
0285 Brick Aggregate (single size) : 63 mm nominal size cum 750.00
0295 Stone Aggregate (single size) : 20 mm nominal size cum 1300.00
0296 Stone Aggregate (single size) : 12.5 mm nominal size cum 1300.00
0297 Stone Aggregate (single size) : 10 mm nominal size cum 1300.00
0313 Blown type petroleum bitumen of penetration 85/25 of approved
quality tonne 34561.00
0316 Bitumen solution primer of approved quality litre 50.00
0318 Bitumen felt fibre base (vegetable or animal):As per IS 7193 Grade I sqm 70.00
0319 Bitumen felt as per IS 7193 Grade-II sqm 80.00
0322 Bitumen felt :Type 3 Grade I sqm 70.00
0367 Portland Cement (OPC-43 Grade) tonne 5700.00
0370 Coal (steam) quintal 400.00
0982 Coarse sand (zone III) cum 1200.00
1169 Kota stone slab 25mm thick (rough chiseled) sqm 280.00
1177 Stone grit 6 mm and down size or pea sized gravel cum 795.00
1213 Water proofing materials kg 35.00
1241 Commercial LPG in cylinder kg 65.00
2200 Carriage of Steam coal tonne 118.59
2202 Carriage of Stone aggregate below 40 mm nominal size cum 103.77
22.11 Providing and laying six courses water proofing treatment with
bitumen felt over roofs consisting of first, third and fifth courses of
blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70
kg per square metre of area respectively, second and fourth courses
of roofing felt type 2 grade II (glass fibre base self finished bitumen
felt) and sixth and final course of stone grit 6 mm and down size
or pea sized gravel spread at 6 cubic decimeter per sqm including
preparation of surface but excluding grading, complete. sqm 548.75
22.12 Supplying and applying bituminous solution primer on roof and / or
wall surface at 0.24 litre per sqm. sqm 33.05
22.13 Deduct for omitting in water proofing treatment final course of
spreading stone grit 6 mm down size or pea sized gravel :
22.13.1 at 6 cudm per sqm sqm 11.95
22.13.2 at 8 cudm per sqm sqm 15.10
22.14 Grading roof for water proofing treatment with
22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand :
4 graded stone aggregate 20 mm nominal size) cum 5583.80
22.14.2 Cement mortar 1:3 (1 cement : 3 coarse sand) cum 9280.65
22.14.3 Cement mortar 1:4 (1cement : 4 coarse sand) cum 8404.25
22.15 Providing and laying in situ seven course water proofing treatment
with APP (Atactic poly-propylene) modified Polymeric memberane
over roof consisting of first coat of bitumen primer @ 0.40 Kg per
sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting
of five layers prefabricated with centre core as 20 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film. 7th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for separately). sqm 459.65
22.16 Providing and laying in situ five course water proofing treatment with
APP (Atactic Polypropylene) modified Polymeric memberane over
roof consisting of first coat of bitumen primer @ 0.40Kg per sqm,
2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall
consist of blown type bitumen of grade 85/25 conforming to IS :
702, 3rd layer of roofing membrane APP modified Polymeric
membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five
layers prefabricated with centre core as 100 micron HMHDPE film
sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film. 5th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for separately). sqm 321.50
22.17 Providing and laying in situ seven course water proofing treatment
with APP (Atactic Polypropylene) modified Polymeric memberane
over roof consisting of first coat of bitumen primer @ 0.40 Kg per
sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm,
which shall consist of blown type bitumen of grade 85/25 conforming
to IS : 702, 3rd and 5th layers of roofing membrane APP modified
Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting
of five layers prefabricated with centre core as 100 micron HMHDPE
film sandwiched on both sides with polymeric mix and the polymeric
mix is protected on both side with 20 micron HMHDPE film. 7th, the
top most layer shall be finished with brick tiles of class designation
10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed
with 2% integral water proofing compound by weight of cement over
a 12 mm layer of cement mortar 1:3 ( 1 cement : 3 fine sand) and
finished neat (item of laying brick tiles shall be paid for separately). sqm 518.40
22.18 Providing and fixing APP (Atactic Polypropylene Polymer) modified
prefabricated five layer 2 mm thick water proofing membrance, black
finished reinforced with glass fibre matt consisting of a coat of
bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same
membrance manufacture of density at 25C, 0.87 - 0.89 kg/ litre
and viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using Butane torch and sealing all joints etc., and
preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23C as 350/300 N/ 5 cm.
Tear strength in longitudinal and transverse direction as 60/80N.
Softening point of membrane not less than 150C. Cold flexibility
shall be upto -2C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the authorised
applicator of the manufacture of membrane.
22.18.1 2mm (for corrugated roof sheets) sqm 282.95
22.19 Providing and laying APP (Atactic Polypropylene Polymer) modified
prefabricated five layer, 3 mm thick water proofing membrane, black
finished reinforced with glass fibre matt consisting of a coat of
bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same
membrane manufactured of density at 25C, 0.87 - 0.89 kg/litre and
viscocity 70 - 160 cps. Over the primer coat the layer of membrane
shall be laid using butane torch and sealing all joints etc., and
preparing the surface complete. The vital physical and chemical
parameters of the membrane shall be as under : Joint strength in
longitudinal and transverse direction at 23C as 350/300 N/5 cm.
Tear strength in longitudinal and transverse direction as 60/80N.
Softening point of membrane not less than 150C. Cold flexibility
shall be upto -2C when tested in accordance with ASTM, D - 5147.
The laying of membrane shall be got done through the authorised
applicator of the manufacturer of membrane :
22.19.1 3 mm thick sqm 410.70
22.24A Providing & Applying high quality acrylic modified resin based
texture of Dholpur/Red sand stone Pattern with anti algae
and UV resistance properties to be applied as intermediate
finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1-
1.5 mm thickness after scrapping and properly cleaning the
surface to remove loose particles from the plaster surface,
followed by top coating with Premium Acrylic Smooth exterior
paint with Silicone additives of required shade by two
or more coats @ 1.43 litres/10 sqm, complete as the direction
of Engineer -in-Charge. sqm 391.80
22.25 Providing and applying crystalline mortar by mixing in the
ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for
the treatment of faulty construction joints, cracks, tie rod holes
and spalled & honeycombed surface of RCC underground
structures like basement, water tanks, bridge deck etc. to
ensure water tightness. The crystallie mortar shall conform to
the EN 1504-3 having compressive strength Class R4 > 45 MPa
and adhesive bond strength Class R3 > 1.5 MPa. The work
shall be carried out all complete as per specification and the
direction of the Engineer-in-charge. The product performance
shall carry guarantee for 10 years against any leakage.
22.25.1 For sealing cracks and faulty construction joints,
by preparing the surface, making U-shape groove
size of 25x25mm and then priming the surface with
integral crystalline slurry @0.05kg per running
meter and while the surface is tacky then filling
the groove upto top edge with crystalline mortar
@1.50kg per running meter. Once crystalline mortar
is touch dry then finally applying two coats
of integral crystalline slurry @0.05kg per running
meter per coat on treated surface. metre 514.00
22.25.2 For patching of tie rod holes, preparing tie rod hole
surface and then priming the area with integral
crystalline slurry @0.070kg per sqm and while the
surface is tacky, repairing and then filling the tie
rod holes with crystalline mortar @0.040kg per hole.
The crystalline mortar shall be tightly rodded into
tie rod holes or packed tightly (For 25x25x25 mm
tie rod hole, use 0.040 kg to fill the hole) each hole 18.45
22.26 Providing and applying of swellable type water stop tape,
19mm x 25mm thick in linear meter (expansive nature) for
construction joints treatment of RCC structure, such as raft
slab, retaining walls, water storage tank and at the junctions
of raft slab with the retaining walls etc.. After cleaning the
surface, one coat of required primer for swellable water stop
tape shall be applied throughout the length of the joint @3.78
litre per 240 running meter. Over the primed surface swellable
type water stop tape shall be placed. The work shall be carried
out all complete as per specification and the direction of
the engineer-in-charge. The product performance shall carry
guaranteed for 10 years against any leakage. metre 538.90
389
BASIC RATES (SH: 23.0 RAIN WATER HARVESTING & TUBEWELLS)
Code Description Unit Rate
No.
0005 Hire charges of Diesel Truck - 9 tonne day 2000.00
0020 Hydraulic Excavator (3D) with driver and fuel day 6500.00
0040 Air compressor 250 cfm with two leads for pneumatic cutters /
hammers day 1500.00
0103 Blacksmith 2nd class day 448.00
0113 Chowkidar day 368.00
0114 Beldar day 368.00
0115 Coolie day 368.00
0123 Mason (Brick layer ) first class day 487.00
0124 Mason (Brick layer ) 2nd class day 448.00
0130 Mistry day 487.00
0134 Rock Hole Driller day 368.00
1235 Diesel litre 46.55
2321 Carriage of Spun iron S & S pipes 150 mm dia 100 metre 378.03
2322 Carriage of Spun iron S & S pipes 200 mm dia 100 metre 614.93
2343 Carriage of Ductile Iron pipes (k7) 100 mm dia 100 metre 226.82
2344 Carriage of Cast iron pipes 150 mm dia 100 metre 378.03
2345 Carriage of Cast iron pipes 200 mm dia 100 metre 614.93
7743 M.S. pipe 150 mm dia casing pipe metre 450.00
7744 M.S. pipe 200 mm dia casing pipe metre 1200.00
7745 PVC blind pipe 150 mm dia as per IS: 12818 metre 487.00
7746 PVC blind pipe 200 mm dia as per IS: 12818 metre 519.00
7747 M.S. cap 150 mm dia each 150.00
7748 M.S. cap 200 mm dia each 190.00
7749 M.S bail plug 150 mm dia each 190.00
7750 M.S bail plug 200 mm dia each 210.00
7751 PVC slotted pipe 150 mm dia as per IS: 12818 metre 450.00
7752 PVC slotted pipe 200 mm dia as per IS: 12818 metre 700.00
7753 Boulder 50 mm to 200 mm cum 700.00
7754 Gravel 5 mm to 10 mm cum 800.00
7755 Gravel 1.5 mm to 2 mm cum 800.00
CONSERVATION
OF
HERITAGE BUILDINGS
395
BASIC RATES (SH: 24.0 CONSERVATION OF HERITAGE BUILDINGS)
Code Description Unit Rate
No.
0101 Bhisti day 407.00
0103 Blacksmith 2nd class day 448.00
0114 Beldar day 368.00
0115 Coolie day 368.00
0116 Fitter (grade 1) day 487.00
0124 Mason (Brick layer) 2 nd class day 448.00
0128 Mate day 407.00
0131 Painter day 448.00
0155 Mason (average) day 467.00
0159 Skilled torch operator for laying tack day 487.00
0773 Unslaked lime quintal 270.00
1034 Bolts and nuts up to 300 mm in length quintal 5100.00
1182 Surki cum 700.00
2205 Carriage of Steel tonne 92.24
4009 Mild steel tubes hot finished welded type kg 42.00
6501 Sand zone V (Jamuna) cum 600.00
7346 Double coupler each 48.00
7387 Spigot for standard jointing kg 45.00
7397 Base Jack each 150.00
7398 Challies each 800.00
7399 Cup locks each 50.00
7767 Stone cleaning chemical approved by ASI litre 165.00
7768 Water repellent chemical approved by ASI litre 650.00
7769 Stone surface strengthening chemical approved by ASI litre 1020.00
7770 Turpentine oil litre 55.00
7771 Liquid Amonia 5% litre 161.00
7775 Sodium pentachlorophenate kg 630.00
9999 Sundries L.S. 1.73
24.6 Ruled/ Flush pointing on White sand stone masonry surface with
lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One
lime : 1.5 surkhi (15% dark red and 85% light yellow surkhi) : 1/2
marble dust}. (The rate is inclusive of all materials & labours involved
except scaffolding). sqm 159.70
24.7 Applying two or more coat of Ethyl Silicate chemical as approved
by Archaeological Survey of India/ Engineer-in-charge, of approved
brand and manufacturer, with brush or spray on the existing stone
masonry surface till there is no further absorption of chemical by
stone surface, including protecting the applied surface from direct
sunlight by suitable means during application, all complete as per
direction of the Engineer-in-Charge (The rate is inclusive of all
materials & labours involved except scaffolding). sqm 267.80
24.8 Applying breathable, non-reactive, antifungal, and water repellant
Silane/ Siloxane chemical as approved by Archaeological Survey of
India/ Engineer-in-charge, of approved brand and manufacture, diluted
with solvent mineral Turpentine oil in the ratio of 1:12 (One part of
approved chemical :12 Part of Turpentine oil), on the existing sand
stone masonry surface with two or more coats to give uniform
application of chemical on the surface, all complete as per direction
of Engineer-In-charge (The rate is inclusive of all materials & labours
involved except scaffolding). sqm 55.15
STRUCTURAL GLAZING
ALUMINIUM COMPOSITE PANEL
399
BASIC RATES (SH: 25.0 STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL
Code Description Unit Rate
No.
2605 Structural sealant - 6 x 12 mm metre 30.00
2606 Spacer tape 6.4 mm thick x 6 mm wide metre 20.00
2607 Weather Sealant - Non Staining (600 ml) each 420.00
2608 Weather Sealant - Normal (300 ml) each 125.00
2609 MS Brackets/Aluminium Alloy Brackets kg 100.00
2610 Silicon Gasket in Kg (Above 50 g / m) kg 570.00
2611 EPDM Gasket in Kg (Above 60 g / m) kg 150.00
2612 Anchor Fastner - M10 each 10.00
2613 SS Bolt with washer of different sizes for structural glazing /
ACP Cladding each 35.00
2614 SS Screws of sizes for structural glazing / ACP Cladding each 4.00
2615 Protective Tape metre 20.00
2616 GI flashing - 1.2 mm thick kg 58.00
2617 6 mm thick high performance glass sqm 1850.00
2618 6 mm thick clear heat strengthened glass sqm 640.00
2619 6 mm thick clear heat strengthened glass each 128.00
2620 ARMS GS HD - Top Hung -20"- Type P- Couple pair 1550.00
2621 Connection Block for vision glass panel each 39.00
2622 Curtain wall striker for vision glass panel each 100.00
2623 Adjustable fastening pawl for vision glass panel each 38.00
2624 Corner drive for vision glass panel each 295.00
2625 Top wedge block for vision glass panel each 135.00
2626 Glass wool of denisity @ 48 Kg / cum with black glass tissue (BGT) sqm 230.00
2627 SS Screws - # 8 x 19 each 10.00
2628 Weather Sealant - DC 789 cartridge 130.00
2629 Cement Board sqm 250.00
2630 Baker rod metre 5.00
2631 4 mm thick ACP sqm 1000.00
2632 Fire Stop metre 550.00
2634 GI/Aluminium Sheet (0.8 mm thick) kg 45.00
7306 Aluminium T or L sections kg 200.00
407
BASIC RATES (SH: 26.0 NEW TECHNOLOGIES AND MATERIALS)
2492 Solid foam uPVC sheet 20mm thick pre laminated on both side
( Accuplist/Accucel/Sintex ) sqm 2075.00
2493 PVC edge beading metre 30.00
2494 Expandable fastner with plastic sleeve each 5.00
2635 GI Screws of gauge 10, length 25 mm for fixing cement fibre
board to C section each 2.75
2636 GI Screws of gauge 10, length 45 mm for fixing cement fibre
board to C section each 3.00
2637 Vapour barrier sqm 170.00
7009 12.5 mm thick tapered edge gypsum plain borad sqm 160.00
7025 self tapping pan head nickle coated mild steel screws of size 13 x
3.2 mm 1000 Nos 550.00
7026 Fibre joint tape 50 mm wide (90 metre) roll each roll 170.00
7274 Glass wool 50 mm thick sqm 250.00
7367 Galvanised M.S. sheet 0.5 mm thick pressed channel section of
size 50x32 mm metre 60.00
7369 Galvanised M.S. sheet 0.50 mm thick pressed stud : 48x34x36 mm metre 75.00
7383 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastner each 7.00
7388 Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt each 12.00
7911 Chemical Rust Remover litre 200.00
7912 Hire charges of Drill machine upto 30 mm dia day 150.00
7913 Epoxy kg 550.00
7914 SBR Polymer kg 180.00
7915 Wooven PVC cloth sqm 25.00
7916 Hire charges of sand blasting equipment day 400.00
7917 Hire charges of compressure day 600.00
7918 25mm thick cement concrete shotcrete(gunting) with compressor sqm 100.00
7921 Adhesive chemical ml 2.36
7922 Bit of drilling machine for Hole upto 30mm dia each 475.00
7923 GI injection nipple 12mm dia, 75mm long each 40.00
7924 Blowing compressed air for cleaning holes upto 30mm dia each 10.00
7925 L shaped 100mm long, 10mm dia mild steel shear key kg 67.10
7927 Acrylic Polymer chemical for cracks kg 30.00
8013 Factory made EPS Core wallpanel /roof panel sandwiched between
two Engineered welded wire fabric mesh of 3 mm dia G.I. wire mesh,
with 50 mm pitch in both the directions, kept at 120-135 mm gap and
interconnected by the zig zag G.I. wire of 3 mm dia at alternate row
by welding. sqm 1650.00
8596 Galvanised MS 8mm outer diameter M-6 dash fastener 25mm long each 31.00
8597 Gi Metal Tile Clip in Plain Beveled edge global white colour tiles
of size 600x600 mm and 0.5 mm thick sqm 650.00
8598 GI Metal Tile Clip in Perforated Beveled edge global white colour
tiles of size 600x600 mm and 0.5 mm thick sqm 812.00
8604 Spring T-section 24x34x0.45 mm (3.00 meter long) metre 180.00
8605 C Wall angle section 20x30x20x0.50 mm (3.00 meter long) metre 90.00
8606 Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) metre 110.00
8607 Spring T-connector each 5.00
8608 C Carrier Connector each 11.00
8609 C Suspension Clip each 8.00
8610 Wire Coupling Clip each 9.00
8611 Main T ceiling sections 24x38x0.3 mm (3 metre long) each 101.00
8612 Perimeter wall angle 24 x 24 x 0.3 mm (3 metre long) each 75.00
8613 Intermediate cross T-Section 24x25x0.3 mm (1.2 m long) each 34.00
8614 Intermediate cross T-Section 24x25x0.3 mm (0.6 m long) each 17.00
8615 Hanger rod 4 mm thick each 8.00
8616 Adjustment clip 85x30x0.8 mm each 5.00
8617 Soffit cleat (Size 27x37x25x1.60 mm) each 4.00
8618 Dash fastener 6 mm dia 50 mm long each 8.00
8619 Galavanised MS L-shape level adjuster of size 85x25x2 mm each 14.00
8784 8 mm thick Calcium silicate perforated tiles of size 595 x595 mm sqm 690.00
8956 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m
in the longitudinal and transverse direction sqm 95.00
8957 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20kN/m
in the longitudinal and transverse direction sqm 109.00
8958 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30kN/m
in the longitudinal and transverse direction sqm 178.00
8959 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40kN/m
in the longitudinal and transverse direction sqm 260.00
8960 Geosynthetic Drainagewith two filtering nonwoven geotextiles having
a W configuration as longitudinal parallel channels. Minimum thickness
to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven
geotextile of minimum thickness of 0.75mm having pores of 150 micron
and tensile strength of 8.0 kN/m and having plane flow capacity of
2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure ,tensile
strength of 18 kN/m , with mass per unit area of 740 gsm. sqm 504.00
26.5 Providing & fixing in position Phenol bonded Bamboo wood panelling
of 10mm thick, in 25 to 40 mm thick panelled or panelled & glazed
shutters for doors, windows, clerestorey windows, in approved colour,
texture & finish. The bomboo wood planks shall have minimum
density of 1000 Kg/cum & minimum Hardness 1000 Kgf. The panels
shall have profiled interlocking system locked in place with bamboo
pins all complete as per directions of Engineer in-charge. (Area of
opening for panel inserts excluding portion inside grooves or rebates
to be measured). sqm 3016.10
26.6 Providing & fixing in position 65 mm thick factory made door frame
of Phenol bonded Bamboo wood (superior class, interior use), in
approved colour, texture and finish.The bamboo wood shall have
minimum density of 1000 Kg/cum, minimum hardness 1000 Kgf.
The door frame shall have tenon & mortise interlocking system, to
be fixed to the wall with 100 mm size G.I screws all complete as
per directions of Engineer-in charge. cudm 228.65
26.7 Providing and fixing 50 mm thick extruded polystyrene rigid insulation
board of required size between cavity wall, complying with ISO
4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity
of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346),
compressive strength of > 350 kPa listed as per ASTM D 1621,
density of 34-36 kg/cum as per ASTM D 1622, water absorption <
1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1
listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per
ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of
class B2 and as per ASTM E84 class A, fixed with suitable water
based adhesive and fastener, complete in all respect as per the
directions of Engineer-in-Charge. sqm 649.10
26.8 Providing and fixing 50 mm thick extruded polystyrene rigid insulation
board of required size underdeck on ceiling surface, complying
with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal
conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per
IS 3346), compressive strength of > 350 kPa listed as per ASTM D
1621, density of 34-36 kg/m as per ASTM D 1622, water absorption
< 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1
listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per
ASTM D 3576. Fire retardent property as per DIN 4102, Part 1 of
class B2 and as per ASTM E84 class A, fixed with suitable water
based adhesive and fastener, complete in all respect as per the
directions of Engineer-in-Charge. sqm 685.75
26.9 Providing and fixing factory made solid Foam uPVC profile for kitchen
cabinet frame (45x20 mm) of approved shade, quality and make.
The profile shall be laminated on both sides, made from rigid foam
sheets (Single extruded) having density 600 Kg/cum and the exposed
edges sealed with PVC edge beading of same shade and colour.
The frame shall be fire retardent with necessary screw holding
capacity. Frame shall be fixed to wall using Expendable Fastener
with necessary stainless steel screws, all complete as per directions
of Engineer-in-charge. metre 294.65
26.25 Providing and fixing 15 mm thick false ceiling tiles at all heights
with integral densified calcium silicate reinforced with fibre and natural
filler false ceiling tiles of Size 595x595 mm of approved texture,
design and patterns having NRC (Noise Reduction coefficient) of
0.50 (minimum) as per IS 8225:1987, Light reflectance of 85%
(minimum). Non combustible as per BS:476 (part-4), fire performance
as per BS:476 (part 6 &7), humidity resistance of 100%, thermal
conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal
level on the existing frame work consisting of T-sections and
Lsections suitably fixed according to tile size as per direction of
Engineer-in-charge. sqm 1291.20
26.26 Providing & fixing false ceiling at all heights with GRG (Glass Fibre
Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of
approved texture, design and patterns having moisture content less
than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS
8225:1987, Non combustible as per BS 476 (part-4)-1970 and light
reflectance of 85% (minimum) to be laid in true horizontal level
suspended on inter-locking metal T-Grid of hot dipped galvanised
iron section of 0.33mm thick (galvanized @ 120 grams per sqm
including both sides) comprising of main-T runners of size 15x32
mm of length 3000 mm, cross - T of size 15x32 mm of length 1200
mm and secondary intermediate cross-T of size 15x32 mm of
length 600mm to form grid module of size 600 x 600 mm, suspended
from ceiling using galvanised mild steel items (galvanizing @ 80
grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash
fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length
and L-shape level adjuster of size 85x25x2 mm. Galvanised iron
perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to
be fixed on periphery wall / partition with the help of plastic rawl
plugs at 450 mm center to center and 40 mm long dry wall SS
screws. The work shall be carried out as per specifications, drawing
and as per directions of Engineer-in-Charge.
26.26.1 With semi perforated 12 mm thick micro tegular edged
GRG false ceiling tiles. sqm 1352.90
26.26.2 With fully perforated 12 mm thick micro tegular edged or
10 mm thick square edged GRG false ceiling tiles. sqm 1452.90
26.27 Providing and fixing mineral fibre false ceiling tiles at all heights of
size 595X595mm of approved texture, design and pattern. The tiles
should have Humidity Resistance (RH) of 99%, Light Reflectance
> 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire
Performance as per (BS 476 pt - 6 &7)in true horizontal level
suspended on interlocking T-Grid of hot dipped all round galvanized
iron section of 0.33 mm thick (galvanized @120 gsm ) comprising
of main T runners of 15x32 mm of length 3000 mm, cross T of size
15x32mm of length 1200 mm and secondary intermediate cross T
of size 15x32 mm of length 600 mm to form grid module of size
600x600 mm suspended from ceiling using galvanized mild steel
item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6
dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000
mm length and L-shape level adjuster of size 85x25x2 mm, spaced
Note: Rates shall be for finished surface area of concrete and shall
include the cost of making holes in existing RCC slab, if required,
for pouring concrete in shuttering mould of jacket and appropriate
approved Super-Plasticiser for rendering concrete as flowable self
compacting and SBR polymer but shall exclude cost of
reinforcement, bond coat, Shear Keys, centering and shuttering,
strutting, propping etc (Payment under this item shall be made only
after proper wet curing has been done and surface has been
satisfactorily evaluated by sounding/tapping with a blunt metal
instrument)
26.34.1 50mm thick in Grade M 25 with cement content not less
than 330 kg per cum sqm 478.40
26.34.2 75mm thick in Grade M 25 with cement content not less
than 330 kg per cum sqm 717.65
26.34.3 100mm thick in Grade M 25 with cement content not
less than 330 kg per cum sqm 956.85
26.35 Providing and injecting approved grout in proportion recommended
by the manufacturer into cracks/honey-comb area of concrete/
masonry by suitable gun/pump at required pressure including cutting
of nipples after curing etc. complete as per directions of Engineer-
in-Charge.
(The payment shall be made on the basis of actual weight of approved
grout injected.)
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2%
of weight of cement used) modified Cement slurry made
with non shrink compound in concrete/RCC work kg 69.50
26.35.2 Stirrer mixed SBR Polymer (of approved make) modified
Cement slurry made with Shrinkage Compensating
Cement in concrete/RCC work. kg 73.00
26.35.3 Epoxy injection grout in concrete/RCC work of approved
make kg 644.45
26.36 Providing, erecting, maintaining and removing temporary protective
screens made out of specified fabric with all necessary fixing
arrangement to ensure that it remains in position for the work duration
as required by the Engineer-in-charge.
26.36.1 Wooven PVC cloth sqm 39.05
26.37 Cleaning of exposed concrete surface of sticking material including
loose and foreign material by sand blasting with coarse sand followed
by and including cleaning with oil free air blast as per direction of
Engineer in charge. sqm 252.60
26.38 Shotcreting R.C.C. columns, beams and slabs etc. in layers with
approved design mix concrete having the specified minimum
characteristic compressive strength [with ordinary portland cement,
coarse sand and graded stone aggregate of 10 mm maximum size
in proportion as per design criteria] including the cost of centering
and shuttering at edges and corners etc. as directed by Engineer-
in-Charge
SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIALS
425
Code Description Unit Rate
No.
26.46 Providing and fixing in position, 200 mm thick factory made Expanded
Polystyrene Core (EPS Core) wall panels consisting of EPS core
sandwiched between two Engineered sheets of welded wire fabric
mesh duly finished with shortcrete materials on outer faces. The
fabric mesh shall be made of 3 mm dia G.I. wire mesh with 50 mm
pitch in both the directions and on both faces of the wall, kept at
120-135 mm gap and connected by the zig zag G.I. wire of 3 mm
dia at alternate row by welding (at an angle ranging from 50-70
degree) . The EPS core shall consist of 100 mm thick EPS of density
not less than 20 kg/ per cum. Both the outer faces of the panel shall
be finished by applying the layer of 50 mm thick cement mortar 1:3
{1 cement: 3 coarse sand (not having more than 40% stone chips of
size upto 6 mm)} with the help of shotcreting/guniting equipment
etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces
finished with trowel. Fixing operations of wall panels shall
be completed in all respect as per drawings and specifications and
under the overall direction of the Engineer-in-charge. sqm 3246.15
26.47 Providing and fixing in position, 230mm thick factory made Expanded
Polystyrene Core (EPS Core) roof/floor panels made of 3 mm dia
G.I. wire mesh with 50 mm pitch in both the directions and on both
faces of panel, kept at 120-135 mm gap and connected by the zig
zag G.I. wire of 3 mm dia at alternate row by welding (at an angle
ranging from 50-70 degree). The EPS core shall consist of 100 mm
thick EPS of density not less than 20kg/ per cum. The bottom side
of the panel shall be finished by applying a layer of 60-65 mm thick
cement mortar 1: 3 {1 cement: 3 coarse sand (not having more than
40% stone chips of size upto 6 mm)} with the help of shotcreting
equipment etc at a pressure of not less than 1 bar (100Kn/m2) and
surface finished with trowel. The top face of the panel shall be
provided and finished by applying 70-75 mm thick layer of cement
concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size). Fixing operations of roof/floor panels
shall be completed in all respect as per drawings and specifications
and under the overall direction of the Engineer-in-charge. sqm 3436.35
26.48 Providing and fixing of costomized Aluminium formwork for monolithic
construction RCC members with a repetitive usage of 100 times
using grade 5052 aluminium for panel sheets of minimum 4 mm
thick and grade 6061 (Type-6) aluminium for extruded sections.
The form work includes of beam components i.e.beam side panel,prop
head for soffit beam,beams soffit panel,beam soffit bulk head and
deck componets i.e. deck panel, deck prop, prop length, deck mid,
soffit length, deck beam bar and wall components i.e. wall panel,
rocker, kiker and internal soffit corner, external soffit corner,external
corner,internal corner etc.,The panels are held in position by a simple
pin and wedge system that passes through holes in the out side rib
of each panel.The tolerance of finished panels to be (-1 mm), and
shall conform to IS 14687-1999. Pins and wedges to be made of
high grade mild steel,all complete as per direction of Engineer-in-
charge.(Cost of RCC work shall be paid seperately) sqm 149.45
429
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
3.0 MORTAR
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
3.1 Cement Mortar 1:1 (1 cement : 1 fine sand). cum 10.20
3.2 Cement mortar 1:2 (1 cement : 2 fine sand). cum 6.80
3.3 Cement mortar 1:3 (1 cement : 3 fine sand). cum 5.10
3.4 Cement mortar 1:4 (1 cement : 4 fine sand). cum 3.80
3.5 Cement mortar 1:5 (1 cement : 5 fine sand). cum 3.10
3.6 Cement mortar 1:6 (1 cement : 6 fine sand). cum 2.50
3.7 Cement mortar 1:2 (1 cement : 2 coarse sand). cum 6.80
3.8 Cement mortar 1:3 (1 cement : 3 coarse sand). cum 5.10
3.9 Cement mortar 1:4 (1 cement : 4 coarse sand). cum 3.80
3.10 Cement mortar 1:5 (1 cement : 5 coarse sand). cum 3.10
3.11 Cement mortar 1:6 (1 cement : 6 coarse sand). cum 2.50
3.12 Cement mortar 1:2 (1 cement : 2 stone dust). cum 6.80
3.13 Cement mortar 1:2 (1 cement : 2 marble dust). cum 6.80
3.14 Cement mortar 1:5 (1 cement : 5 marble dust). cum 3.10
3.15 White cement mortar 1:2 (1 white cement : 2 marble dust). cum 6.80*
3.16 White cement mortar 1:3 (1 white cement : 3 marble dust). cum 5.10*
3.17 White cement mortar 1:5 (1 white cement : 5 marble dust). cum 3.10*
* white cement
430
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
4.0 CONCRETE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
CEMENT CONCRETE (CAST - IN- SITU)
4.1 P/L cement concrete - all works upto plinth level :
4.1.2 1:1:3 (1 Cement : 1 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
4.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
4.1.4 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone
aggregate 40 mm nominal size) cum 3.20
4.1.5 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) cum 2.20
4.1.6 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone
aggregate 40 mm nominal size) cum 2.20
4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size) cum 1.70
4.1.10 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) cum 1.30
4.1.11 1:5:10 (1 cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size) cum 1.30
4.1.12 1:2:3:9 (1 ordinary portland cement : 2 Fly ash :
3 coarse sand : 9 graded stone aggregate 40 mm
nominal size) cum 1.70
4.1.13 1:2:4:11 (1 ordinary portland cement : 2 fly
ash : 4 coarse sand : 11 graded stone aggregate
40 mm nominal size) cum 1.30
4.2 P/L cement concrete in retaining walls, return walls etc.:
4.2.2 1:1:3 (1 cement:1 coarse sand:3 graded stone
aggregate 20 mm nominal size) cum 4.00
4.2.3 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
4.2.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone
aggregate 20 mm nominal size) cum 2.20
4.2.8 1:5:10 (1 cement : 5 coarse sand : 10 graded stone
aggregate 40 mm nominal size) cum 1.30
431
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
432
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
4.20 P/L ready mix plain cement concrete :
4.20.1 All works upto plinth level
4.20.1.1 M-15 grade plain cement concrete cum 2.40
4.20.1.2 M-10 grade plain cement concrete cum 2.20
4.20.2 All works above plinth and upto floor V level
4.20.2.1 M-15 grade plain cement concrete cum 2.40
4.20.2.2 M-10 grade plain cement concrete cum 2.20
433
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
5.0 REINFORCED CEMENT CONCRETE
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
CAST-IN-SITU
5.1 P/L R.C.C. upto plinth level :
5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
5.1.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) cum 3.20
5.2 R.C.C work in walls etc.:
5.2.2 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size) cum 4.00
5.3 R.C.C. (1:1.5:3) work in beams etc. cum 4.00
5.4 R.C.C. (1:1.5:3) work in kerbs, steps etc. cum 4.00
5.5 R.C.C. (1:1.5:3) work in arches,domes etc. cum 4.00
5.6 R.C.C. (1:1.5:3) work in chimneys & shafts. cum 4.00
5.7 R.C.C. (1:1.5:3) work in well-steining. cum 4.00
5.8 R.C.C. (1:1.5:3) work in vertical and horizontal fins individually
or forming box louvers, facias and eaves boards. cum 4.00
PRE - CAST R.C.C.
5.12 P/F precast R.C.C. (1:1.5:3) work in string courses, bands,
copings, bed plates, anchor blocks, plain window sills etc. cum 4.00
5.13 P/F precast R.C.C. (1:1.5:3) in small lintels not exceeding
1.5m clear span. cum 4.00
5.14 P/F precast R.C.C. (1:1.5:3) in mouldings as in cornices,
windows sills etc. cum 4.00
5.15 P/F precast R.C.C. (1:1.5:3) in lintels, beams and bressumers etc. cum 4.00
5.16 P/F precast R.C.C. (1:1.5:3) in shelves. cum 4.05
5.17 P/F precast R.C.C. (1:1.5:3) in vertical & horizontal fins individually
or forming box louvers. cum 4.00
5.18 Fixing precast cement concrete Jali (1:2:4).
5.18.1 50 mm thick 100 sqm 1.64*
5.18.2 40 mm thick 100 sqm 1.64*
5.18.3 25 mm thick 100 sqm 1.64*
434
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
435
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
6.0 BRICK WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
6.1 Brick work in foundation & plinth with non modular bricks.
6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.2 Brick work in foundation & plinth with modular bricks.
6.2.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.836
6.2.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.55
6.3 Brick work with machine moulded perforated bricks.
6.3.1 With non modular bricks. cum 0.625
6.3.2 With modular bricks. cum 0.55
6.4 Brick work in superstructure.
6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.7 Half brick masonry in cement mortar (1:3) for closing cavity
5 to 7.5 cm wide in cavity wall. 100 metre 3.86
6.8 Brick work 7 cm in cement mortar (1:3). 100 sqm 9.23
6.9& Brick work in plain & gauged arches in cement mortar (1:3). cum 1.28
6.10
HALF BRICK MASONRY
6.12& Half brick masonry in foundations & plinth and superstructure.
6.13
6.12.1 Cement mortar 1:3 (1 cement : 3 coarse sand) 100 sqm 14.28
&
6.13.1
6.12.2 Cement mortar 1:4 (1 cement : 4 coarse sand) 100 sqm 10.64
&
6.13.2
BRICK TILE WORK
6.16 ile brick masonry in foundation and plinth. :
6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 1.52
6.16.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 1.00
6.17& Tile brick masonry with m/c moulded tiles in cement mortar
6.18 1:6 (1 cement : 6 coarse sand). cum 1.00
6.20 & Tile brick masonry with tile bricks in plain/gauged arches
6.21 work in in cement mortar (1:4). cum 1.33
6.22 Tile brick masonry work 5 cm thick in cement mortar (1:3). 100 sqm 7.65
436
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
HONEY COMB WORK
6.23 Honey-comb brick work 10/11.4 cm thick in cement mortar 1:4. 100 sqm 6.56
EXPOSED BRICK WORK
6.26 Brick work with selected bricks in cement mortar (1:6). cum 0.625
6.27 Brick work with modular bricks in cement mortar (1:6). cum 0.55
6.28 Brick work with machine moulded modular bricks in cement
mortar (1:6). cum 0.55
6.29 Brick work with m/c moulded F.P.S. bricks in cement
mortar (1:6). cum 0.625
6.30 Brick work with machine moulded perforated F.P.S. bricks in
cement mortar (1:6). cum 0.625
6.31 Brick work with machine moulded perforated modular bricks in
cement mortar (1:6). cum 0.55
6.32 Brick work with clay flyash F.P.S. brick.
6.32.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.32.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.625
6.34 Brick work with non modular fly ash lime bricks (FALG Bricks) in :
6.34.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.95
6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) cum 0.625
6.35 Brick work with modular calcium silicate bricks machine
moulded in :
6.35.1 Cement mortar 1:4 (1 cement : 4 coarse sand) cum 0.836
6.35.3 Cement mortar 1:6 (1 cement : 6 Coarse sand) cum 0.55
6.36 Brick work with modular extruded burnt fly ash clay sewer
bricks in :
6.36.1 Cement Mortar 1:4 ( 1 cement : 4 coarse sand) cum 0.836
6.37 Brick work with modular extruded burnt fly ash clay sewer
bricks in cement mortar (1:3). cum 1.275
6.38 Autoclaved aerated cement blocks masonry with 100mm
thick AAC blocks in cement mortar (1:4). cum 0.57
6.44 Brick edging 7 cm wide in cement mortar (1:4). 100 metre 0.137
6.45 Half brick masonry with non modular FALG bricks.
6.45.1 Cement mortar 1:3 (1 cement :3 coarse sand). 100 sqm 14.28
6.45.2 Cement mortar 1:4 (1 cement :4 coarse sand). 100 sqm 10.64
437
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
7.0 STONE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
RANDOM RUBBLE MASONRY
7.1& Random rubble masonry with cement mortar (1:6). cum 0.825
7.2
COURSED RUBBLE MASONRY
7.6 Coursed rubble masonry (first sort) with :
7.6.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.750
7.7 Coursed rubble masonry (second sort) with :
7.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 0.750
ASHLAR MASONRY
7.12 Stone work in plain ashlar in cement mortar (1:6) including
pointing with white cement mortar (1:2). cum 0.54
7.13& Stone work plain ashlar in arches/domes in cement mortar (1:3)
7.14 including pointing with white cement mortar (1:2). cum 1.07
7.15 Stone work ashlar punched in cement mortar 1:6) including
pointing with white cement mortar (1:2). cum 0.54
SUNK, MOULDED, CARVED ASHLAR MASONRY
7.20 Stone work sunk and / or moulded including pointing with white
cement mortar (1:2). cum 0.54
MISCELLANEOUS STONE WORK
7.23 Stone work (machine cut edges) for wall lining etc. (veneer work)
in cement mortar (1:3) including pointing in white cement
mortar (1:2). 100 sqm 9.18 + 1.56*
7.25 P/F stainless steel cramps in stone wall lining in cement
mortar (1:2). kg 0.07
7.26 P/F stone dowels 10x5x2.50 cm in cement mortar (1:2) . each 0.007
7.27 P/F copper pins 7.5 cm long 6 mm diameter in stone wall
lining in cement mortar (1:2). each 0.007
7.28 P/F sloping chajja of stone 40 mm thick and upto 80 cm wide in
cement mortar (1:4) i/c pointing in white cement mortar (1:2). 100 sqm 5.59
7.29 P/F horizontal chajja of stone 40 mm thick and upto 80 cm
projection in cement mortar (1:4) i/c pointing in white cement
mortar (1:2). 100 sqm 4.94 + 0.03*
7.30 P/F 30 mm red sand stone sun-shade with cement mortar 1:4
including finishing complete. 100 sqm 2.19
7.31 Providing and fixing red sand stone brackets 55x22.5x45cm. 100nos 3.02
438
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
* White cement
439
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
8.0 MARBLE & GRANITE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
8.1 Marble work 18 mm thick for wall lining in cement mortar 1:3 100
including pointing with white cement mortar 1:2. sqm 8.67 + 1.70*
8.2 P/F 18mm thick gang saw cut mirror polished premoulded and
prepolished) machine cut for kitchen platforms, vanity counters
100 etc. laid over 20mm thick base cement mortar 1:4. sqm 9.12
8.4 Extra for fixing marble /granite stone over and above corres-
ponding basic item, in facia and drops of width upto 150 mm
with epoxy 100 resin based adhesive including cleaning etc.
complete. metre 1.27
8.7 P/F cramps in RCC/ CC backing with cement mortar 1:2 .
8.7.1 Gunmetal cramps kg 0.0635
8.7.2 Stainless steel cramps kg 0.0701
8.9 Stone tile work for wall lining over 12mm thick bed of cement
mortar (1:3) and cement slurry @ 3.3 kg/sqm including pointing
100 in white cement complete. sqm 10.44 + 1.90*
8.11 P/F machine cut mirror/edge polished 100 sqm. 8.16 + 3.30*
8.12 P/L flamed finish granite stone flooring 100 sqm. 13.50
8.13 P/L polished granite stone ......... 100 sqm. 13.50
* White cement
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. : 8.0 MARBLE & GRANITE WORK
440
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
9.0 WOOD AND P.V.C. WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. : 8.0 WOOD AND PVC WORK
441
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
10.0 MARBLE & GRANITE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
10.4 P/F 1 mm thick M.S. sheet sliding-shutters with frame. 100 sqm 0.35
10.5 P/F 1 mm thick M.S. sheet door with frame. 100 sqm 0.35
10.6 Supplying and fixing rolling shutters. 100 sqm 0.35
10.10.1 & Fixing standard steel glaze door windows etc. 100 kg 0.13
10.11.1
10.13.1 P/F T iron froms for doors windows & ventilators 100 kg 0.11
10.15 Providing and fixing M.S. Tubular frames for doors,
windows, ventilators and cupboard with 15x3 mm lugs
10 cm long embedded in cement concrete blocks
15x10x10 cm of 1:3:6 mix. 100 kg 0.28
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. : 10.0 MARBLE & GRANITE WORK
442
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
11.0 FLOORING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
11.1 Brick on edge flooring.
11.1.1 1:4 (1 cement : 4 coarse sand) sqm 0.1850
11.1.2 1:6 (1cement : 6 coarse sand) sqm 0.1285
11.3 Cement concrete flooring 1:2:4.
11.3.1 40mm thick with 20mm nominal size stone aggregate sqm 0.17
11.4 52 mm thick cement concrete flooring. sqm 0.231
11.5 62 mm thick cement concrete flooring. sqm 0.263
11.6 Cement plaster skirting with cement mortar (1:3). sqm 0.14
11.7 Cement concrete pavement with C.C. (1:2:4). cum 3.20
TERRAZO FLOORING
11.9 40 mm thick marble chips flooring with under layer 34 mm
thick cement concrete (1:2:4).
11.9.1 Dark shade pigment with ordinary cement sqm 0.1695
11.9.2 Light shade pigment with white cement sqm 0.129+0.0405*
11.9.3 Medium shade pigment with 50% white cement and
50% ordinary cement sqm 0.1492+0.0202*
11.9.4 White cement without any pigment sqm 0.129+0.0202*
11.9.5 Light shade pigment with ordinary cement sqm 0.1695
11.9.6 Ordinary cement without any pigment sqm 0.1695
11.10 40 mm thick marble chips flooring with under layer 31mm thick
cement concrete 1:2:4.
11.10.1 Dark shade pigment with Ordinary cement sqm 0.1783
11.10.2 Light shade pigment with white cement sqm 0.1205+0.0578*
11.10.3 Medium shade pigment with 50% white cement and
50% ordinary cement sqm 0.1494+0.0289*
11.10.4 White cement without any pigment sqm 0.1205+0.0578*
11.10.5 Light shade pigment with ordinary cement sqm 0.1783
11.10.6 Ordinary cement without any pigment sqm 0.1783
11.11 40 mm thick marble chips flooring with under layer 28 mm thick
cement concrete 1:2:4.
11.11.1 Dark shade pigment with ordinary cement sqm 0.1907
11.11.2 Light shade pigment with white cement sqm 0.1097+0.081*
11.11.3 Medium shade pigment with 50% white cement
and 50% ordinary cement sqm 0.1502+0.0405*
11.11.4 White cement without any pigment sqm 0.1097+0.081*
443
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
11.11.5 Light shade pigment with ordinary cement sqm 0.1097
11.11.6 Ordinary cement without any pigment sqm 0.1097
11.12 Marble chips skirting :
11.12.1 18 mm thick with under layer 12 mm thick in
cement plaster 1:3 (1 cement : 3 coarse sand) :
11.12.1.1 Dark shade pigment with ordinary cement sqm 0.1292
11.12.1.2 Light shade pigment with white cement sqm 0.0887+0.0405*
11.12.1.3 Medium shade pigment with 50% white cement
and 50% ordinary cement sqm 0.109+0.0203*
11.12.1.4 White cement without any pigment sqm 0.109+0.0405*
11.12.1.5 Light shade pigment with ordinary cement sqm 0.1292
11.12.1.6 Ordinary cement without any pigment sqm 0.1292
11.15 Crazy marble stone flooring.
11.15.1 18 mm thick crazy marble stone white, black
or as specified sqm 0.1200+0.0405*
* White Cement
TILE FLOORING
11.16 Precast terrazo tiles 22mm thick in floors, and landings on
20mm thick bed of cement mortar (1:4).
11.16.1 Light shade using white cement sqm 0.0895+0.044*
11.16.2 Medium shade using 50%white cement and
50% ordinary cement sqm 0.0917+0.0220*
11.16.3 Dark shade using ordinary cement sqm 0.0939
11.16.4 Ordinary cement without any pigment sqm 0.0939
11.18 Precast terrazo tiles 22 mm thick in skirting and risers
of steps.
11.18.1 Light shade using white cement. sqm 0.0734+0.066*
11.18.2 Medium shades using 50% white cement and
50% ordinary cement. sqm 0.1064+0.033*
11.18.3 Dark shade using ordinary cement sqm 0.1394
11.18.4 Ordinary cement without any pigment sqm 0.1394
11.19 Chequered terrazo tiles 22 mm thick in floors on 20 mm
thick bed of cement mortar (1:4).
11.19.1 Light shade using white cement sqm 0.0895+0.044*
11.19.2 Medium shade using 50% white cement,
50% ordinary cement sqm 0.0917+0.024*
11.19.3 Dark shade using ordinary cement sqm 0.0939
11.19.4 Ordinary cement without any pigment sqm 0.0939
444
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
11.20 Chequerred precast cement concrete tiles 22 mm thick in
foot path on 20 mm thick bed of cement mortar (1:4).
11.20.1 Light shade using white cement sqm 0.1291+0.066*
11.20.2 Medium shade using 50% white cement 50%
Grey cement sqm 0.1621+0.033*
11.20.3 Dark shade using ordinary cement sqm 0.1951
11.20.4 Ordinary cement without any pigment sqm 0.1951
11.21 Providing and fixing 10mm thick acid and or alkali resistant tiles.
11.21.1 In flooring on a bed of 10 mm thick mortar 1:4
(1 acid proof cement : 4 coarse sand)
11.21.1.1 Acid and alkali resistant tile sqm 0.0786**
11.21.2 In dado/skirting on 12 mm thick mortar 1:4
(1 acid proof cement : 4 coarse sand)
11.21.2.1 Acid and alkali resistant tile sqm 0.0862**
11.22 Tile work in skirting, risers of steps etc. with 8 mm thick
marble tile. sqm 0.1044
STONE FLOORING
11.23 Marble stone flooring with 18 mm thick marble stone over
20 mm thick cement mortar (1:4). sqm 0.13512
KOTA STONE FLOORING
11.26 Kota stone slab flooring over 20 mm thick bed of cement
mortar (1:4). sqm 0.1491
11.27 Kota stone slabs 20 mm thick in risers of steps, skirting etc.
laid on 12 mm (average) thick cement mortar 1:3. sqm 0.1374
SAND STONE FLOORING
11.28 40 mm thick fine dressed stone flooring over 20 mm (average)
thick base of cement mortar 1:5 with joints finished flush. sqm 0.0775
11.29 40 mm thick fine dressed stone flooring over 20 mm (average)
thick base of cement mortar 1:5 including pointing with
cement mortar 1:2. sqm 0.0931
11.30 40 mm thick rubbed stone flooring over 20 mm (average) thick
base of cement mortar 1:5 with joints 3mm thick, side buttered
with cement mortar 1:2. sqm 0.0931
CERAMIC GLAZED TILES
11.36 P/F 1st quality ceramic glazed wall tiles over 12 mm thick
bed of cement Mortar (1:3). sqm 0.1044
11.37 P/L ceramic glazed floor tiles laid on 20 mm thick Cement
Mortar (1:4). sqm 0.1242
445
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
11.38 P/L ceramic glazed floor tiles laid on 20mm thick bed of
Cement Mortar (1:4). sqm 0.1242
11.39& P/L rectified Glazed Ceramic floor tiles laid on 20mm thick
11.40 cement mortar (1:4). sqm 0.1242
VITRIFIED FLOOR TILES
11.41 P/L vitrified floor tile laid on 20mm thick cement mortar (1:4). sqm 0.1242
11.44 Crazy ceramic tile flooring. sqm 0.0646
11.46 P/L vitrified tile in skirting in cement mortar (1:3). sqm 0.088
11.51 P/L Machine cut, Mirror polished, Italian Marble stone flooring Sqm. 0.085 + 0.05*
11.52 P/L Machine cut Mirror polished Marble stone flooring Sqm. 0.085 + 0.05*
* White cement
** Acid alkali resistant cement.
446
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
12.0 ROOFING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
12.16 10 cm thick mud phaska with flat tile bricks grouted with
cement mortar (1:3). 100 sqm 3.11
12.17 10cm thick mud phaska with machine moulded tile bricks
grouted with cement mortar (1:3). 100 sqm 3.11
12.19 Providing and laying brick tiles over mumty roofs grouted with
cement mortar (1:3). 100 sqm 9.13
12.20 Providing and laying pressed clay tiles on roofs jointed with
cement mortar (1:4). 100 sqm 9.92
12.21 Providing gola 75x75 mm in cement concrete (1:2:4). metre 0.031
12.22 Making khurras 45x45 cm with average minimum thickness
of 5 cm cement concrete (1:2:4). each 0.06
12.23 Providing sand stone slab for roofing and laying cement
mortar (1 : 4). 100 sqm 0.74
12.38 Providing and fixing M.S. holder bat clamps in cement concrete
blocks 10x10x10cm of 1:2:4 mix. each 0.005
12.55 P/F heat resistant tile on roof with cement mortar (1:4) and
filling joints with white cement marble mix. sqm 0.1367
447
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
13.0 FINISHING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
CEMENT PLASTER (IN FINE SAND)
13.1 12 mm cement plaster:
13.1.1 1:4 (1 cement : 4 fine sand) 100 sqm 5.47
13.1.2 1:6 (1 cement : 6 fine sand) 100 sqm 3.60
13.2 15 mm cement plaster:
13.2.1 1:4 (1 cement : 4 fine sand) 100 sqm 6.54
13.2.2 1:6 (1 cement : 6 fine sand) 100 sqm 4.30
13.3 20 mm cement plaster :
13.3.1 1:4 (1 cement : 4 fine sand) 100 sqm 8.51
13.3.2 1:6 (1 cement : 6 fine sand) 100 sqm 5.60
CEMENT PLASTER (IN COARSE SAND)
13.4 12 mm cement plaster :
13.4.1 1:4 (1 cement : 4 coarse sand) 100 sqm 5.47
13.4.2 1:6 (1 cement : 6 coarse sand) 100 sqm 3.60
13.5 15 mm cement plaster :
13.5.1 1:4 (1 cement : 4 coarse sand) 100 sqm 6.54
13.5.2 1:6 (1 cement : 6 coarse sand) 100 sqm 4.30
13.6 20 mm cement plaster :
13.6.1 1:4 (1 cement : 4 coarse sand) 100 sqm 8.51
13.6.2 1:6 (1 cement : 6 coarse sand) 100 sqm 5.60
CEMENT PLASTER WITH A FLOATING COAT OF
NEAT CEMENT
13.7 12 mm cement plaster finished with a floating coat of
neat cement :
13.7.1 1:3 (1 cement : 3 fine sand) 100 sqm 9.54
13.7.2 1:4 (1 cement : 4 fine sand) 100 sqm 7.67
13.8 15 mm cement plaster finished with a floating coat of
neat cement :
13.8.1 1:3 (1 cement : 3 fine sand) 100 sqm 10.97
13.8.2 1:4 (1 cement : 4 fine sand) 100 sqm 8.74
13.9 Cement plaster (1:3) finished with a floating coat of
neat cement.
13.9.1 12 mm Cement Plaster 100 sqm 9.54
13.9.2 20 mm Cement Plaster 100 sqm 13.62
448
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
13.10 15 mm cement plaster (1:3) finished with a floating coat of
neat cement. 100 sqm 10.97
CEMENT PLASTER IN TWO COATS
13.11 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster 1:5 finished with a top layer 6mm thick
cement plaster 1:6. 100 sqm 6.26
13.12 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster 1:5 and a top layer 6mm thick cement
plaster (1:3). 100 sqm 8.13
13.13 12 mm cement plaster 1:2 (1 cement : 2 stone dust). 100 sqm 9.79
13.14 15 mm cement plaster 1:2 (1 cement : 2 stone dust). 100 sqm 11.70
13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust). 100 sqm 15.23
6 MM CEMENT PLASTER
13.16 6 mm cement plaster of mix :
13.16.1 1:3 (1 cement : 3 fine sand) 100 sqm 3.67
13.17 6 mm cement plaster (1:3) finished with a floating coat of
neat cement. 100 sqm 5.87
13.18 Neat cement punning 100 sqm 2.20
ROUGH CAST PLASTER
13.19 Rough cast plaster in two layers, under layer 12 mm
cement plaster (1:4) and top layer 10mm cement
plaster (1:3). 100 sqm 11.59
PEBBLE DASH PLASTER
13.20 Pebble dash plaster in two layers, under layer 12mm
cement plaster 1:4 and top layer 10mm cement plaster with
cement mortar (1:3). 100 sqm 11.59
PLAIN CEMENT MORTAR BANDS
13.28 12 mm thick plain cement mortar bands in cement 100 metre
mortar (1:4) : (Flush /Sunk / Raised / Moulded Band). 1cm wide 0.053
13.29 18 mm thick plain cement mortar band in cement mortar (1:4). 100 metre
1cm wide 0.076
13.30 18 mm thick moulded cement mortar band in two coats 100
under layer 12mm thick with cement mortar 1:5, top layer metre
6mm thick with cement mortar (1:4). 1cm wide 0.07
POINTING OF BRICK WORK
13.31 Pointing on brick work with cement mortar (1:3) :
13.31.1 Flush / Ruled/ Struck or weathered pointing 100 sqm 1.53
13.31.2 Raised and cut pointing 100 sqm 2.04
449
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
* White cement
450
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
14.0 REPAIR TO BUILDING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
14.1 Repairs to plaster of thickness 12 mm to 20 mm in patches
with cement mortar 1:4. 100 sqm 6.95
14.2 Fixing chowkhats in existing opening with hold fasts in
cement concrete blocks with cement concrete 1:3:6.
14.2.1 Door chowkhats each 0.12
14.2.2 Window chowkhats each 0.06
14.2.3 Clerestory window chowkhats each 0.03
14.12 Providing and fixing 16 mm M.S. Fan clamps in existing
R.C.C. slab. each 0.016
14.13 Regrading terracing of mud phaska to proper slope. 100 sqm 3.11
14.14 Replacing sand stone slabs in roofing in cement mortar 1:4. 100 sqm 0.78
14.15 Renewing wooden battens in roofs & making good the holes
in walls. cum 0.36
14.16 Renewing wooden beams in roofs & making good the holes
in walls. cum 0.13
14.18 Flush pointing with cement mortar 1:3 for flat tile bricks on
top of mud phaska. 100 sqm 0.76
451
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
16.0 ROAD WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
FENCING
16.23 P/F boundary stone including finishing smooth with cement
mortar (1:3). each 0.082
16.24 P/F precast R.C.C. kilometre stone including finishing smooth
in cement mortar (1:3).
16.24.1 35x111x25 cm size each 0.37
16.24.2 50x152.5x25 cm size each 0.698
16.24.3 35x93.5x18 cm size each 0.23
CONCRETE PAVEMENT
16.42 Cement concrete (1:2:4) in pavements. cum 3.20
16.43 Providing and laying design mix cement concrete of M-30
grade, in roads/ taxi tracks/ runways, using cement content
as per design mix. cum 3.40
MISCELLANEOUS
16.49 Making bell mouth opening including providing cement
concrete (1:3:6) & plastering with cement mortar (1:3). 10 nos 6.60
16.52 Providing and fixing precast lime fly ash concrete blocks
including finishing with 10mm thick cement mortar (1:3), in
foot paths. sqm 0.05
16.63 P/L kerb channel 30cm wide and 50mm thick of cement
concrete (1:3:6). metre 0.11
16.67 Providing and fixing factory made RCC pavement slab of M-30
grade in footpath over a bed of 20mm average thick cement
mortar (1:5). 100 sqm 7.75
16.69 Providing and laying factory made kerb stone of M-25 grade
jointed with cement mortar (1:3). cum 0.05
16.75 Providing and laying C.C. pavement of mix M-25 with ready
mixed concrete. cum 3.30
16.80 Dry lean cement concrete sub base. cum 1.50
16.85 Laying old kerb stones, jointed with cement mortar (1:3). 100 metre 0.3723
16.86 P/L gang saw cut 18 mm thick, morror polished sqm. 0.09
16.87 P/L gang saw cut 30 mm thick mirror polished sqm. 0.09
16.88 P/L Matt finished vitrified tile of size sqm. 0.12
16.89 P/L Matt finished vitrifid tile of size sqm. 0.12
16.90 P/L tactile tile sqm. 0.12
16.92 P/F 10x10x7.5 cm. granite stone block sqm. 1.85
16.93 Providing and Placing in position 100mm thick precast RCC
covers on drain of footpath sqm. 0.352
452
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
17.0 SANITARY INSTALLATIONS
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
17.1/17.2/
17.3 Fixing Indian European type W.C. pan. each 0.05
17.4 Fixing white vitreous china urinal basin :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic
flushing cistern each 0.025
17.4.2 Range of two urinal basins with 5 litre white P.V.C.
automatic flushing cistern each 0.04
17.4.3 Range of three urinal basins with 10litre white P.V.C.
automatic flushing cistern each 0.067
17.4.4 Range of four urinal basins with 10 litre white P.V.C.
automatic flushing cistern each 0.095
17.5 Fixing white vitreous china flat back half stall urinal :
17.5.1 Single half stall urinal with 5 litre P.V.C. automatic
flushing cistern each 0.051
17.5.2 Range of two half stall urinals with 5 litre P.V.C.
automatic flushing cistern each 0.102
17.5.3 Range of three half stall urinals with 10 litre P.V.C.
automatic flushing cistern each 0.153
17.5.4 Range of four half stall urinals with 10 litre P.V.C.
automatic flushing cistern each 0.203
17.6 Fixing one piece construction white vitreous china squatting plate :
17.6.1 Single squatting plate with 5 litre P.V.C. automatic
flushing cistern each 0.051
17.6.2 Range of two squatting plates with 5 litre P.V.C.
automatic flushing cistern each 0.102
17.6.3 Range of three squatting plates with 10 litre P.V.C.
automatic flushing cistern each 0.153
17.6.4 Range of four squatting plates with 10 litre P.V.C.
automatic flushing cistern each 0.203
17.7 Fixing wash basin with C.I. brackets. each 0.025
17.8 Fixing white vitreous china pedestal for wash basin. each 0.016*
17.9 Fixing kitchen sink with C.I. brackets. each 0.025
17.10 Fixing kitchen sink with C.I. brackets. each 0.025
17.11 Fixing kitchen sink with C.I. brackets. each 0.025
17.12 Fixing draining board with C.I. brackets. each 0.014
453
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
17.13 Fixing White vitreous china water closet squatting pan. each 0.025
17.17 Fixing a pair of white vitreous china foot rests. each 0.025
17.23 Fixing white vitreous china flat urinal basin. each 0.01
17.24 Fixing white vitreous china squatting plate urinal. each 0.02
17.25 Fixing white vitreous china wash basin. each 0.015
17.26 Fixing kitchen sink. each 0.015
17.27 Fixing kitchen sink. each 0.015
17.37 Providing and fixing M.S. holder-bat clamps. each 0.005
17.59 Providing and fixing M.S. stays and clamps. each 0.005
17.60 Providing and fixing trap of self-cleansing design. each 0.025
17.61 Cutting chases in brick masonry walls for sand cast iron/
centrifugally cast (spun) iron pipes and making good the
same with C.C.(1:3:6).
17.61.1 100 mm dia 100 metre 5.40
17.61.2 75 mm dia 100 metre 3.70
17.61.3 50 mm dia 100 metre 1.87
* White Cement.
454
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
18.0 WATER SUPPLY
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
18.1/18.4/ Providing and fixing G.I./ PE-AL-PE/ PP-R pipes.
18.7/18.10 Internal work - Exposed on wall
18.10.1 15 mm dia nominal bore 100 metre 0.05
18.10.2 20 mm dia nominal bore 100 metre 0.06
18.10.3 25 mm dia nominal bore 100 metre 0.07
18.10.4 32 mm dia nominal bore 100 metre 0.075
18.10.5 40 mm dia nominal bore 100 metre 0.08
18.10.6 50 mm dia nominal bore 100 metre 0.08
18.2/18.5/
18.8/18.11 P/F concealed pipes. 100 metre 0.88
18.32 Constructing masonry Chamber 30x30x50 cm, for
stop cock. each 0.26
18.33 Constructing masonry Chamber 60x60x75 cm, for
sluice valve. each 1.44
18.34 Constructing masonry Chamber 90x90x100 cm, for
sluice valve. each 2.48
18.35 Constructing masonry Chamber 120x120x100 cm, for
sluice valve. each 3.50
18.36 Constructing masonry Chamber 60x60x75 cm, for fire
hydrants. each 1.30
18.37 Constructing masonry Chamber 60x45x50 cm, for
water meter. each 1.34
18.76 Cutting holes up to 30x30 cm in walls including making
good the same. 100 nos. 2.92
18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs
and repairing the hole after insertion of drain pipes etc.
with cement concrete (1:2:4). 100 nos. 0.70
18.78 Making chases up to 7.5x7.5 cm in walls i/c finishing. 100 metre 0.88
18.79 Making hole up to 20x20 cm and embedding pipes up to
150 mm diameter in masonry and filling with cement
concrete (1:3:6). 100 metre 4.90
455
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
19.0 DRAINAGE
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
19.1 Jointing glazed stoneware pipes with stiff mixture of cement
mortar in the proportion of (1:1).
19.1.1 100 mm diameter 100 metre 2.17
19.1.2 150 mm diameter 100 metre 3.23
19.1.3 200 mm diameter 100 metre 4.33
19.1.5 250 mm diameter 100 metre 5.40
19.1.6 300 mm diameter 100 metre 6.47
19.2 Laying cement concrete (1:5:10) alround S.W. pipes:
19.2.1 100 mm diameter S.W. pipe 100 metre 19.24
19.2.2 150 mm diameter S.W. pipe 100 metre 23.53
19.2.3 200 mm diameter S.W. pipe 100 metre 27.43
19.2.5 250 mm diameter S.W. pipe 100 metre 31.72
19.3 Laying cement concrete (1:5:10) upto haunches of
S.W. pipes:
19.3.1 100 mm diameter S.W. pipe 100 metre 9.14
19.3.2 150 mm diameter S.W. pipe 100 metre 14.82
19.3.3 200 mm diameter S.W. pipe 100 metre 17.42
19.3.5 250 mm diameter S.W. pipe 100 metre 20.28
19.3.6 300 mm diameter S.W. pipe 100 metre 23.40
19.4 Providing and fixing square-mouth S.W. gully trap :
19.4.1 100x100 mm size P type each 0.27
19.4.2 150 x 100 mm size P type. each 0.26
19.4.3 180x150 mm size P type each 0.25
19.6 P/L NP2 class R.C.C. pipes with collars jointed with
stiff mixture of cement mortar in the proportion of (1:2):
19.6.1 100 mm dia. R.C.C. pipe 100 metre 0.50
19.6.2 150 mm dia. R.C.C. pipe 100 metre 0.60
19.6.3 250 mm dia. R.C.C. pipe 100 metre 0.90
19.6.4 300 mm dia. R.C.C. pipe 100 metre 1.10
19.6.5 450 mm dia. R.C.C. pipe 100 metre 2.40
19.6.6 500 mm dia. R.C.C. pipe 100 metre 2.60
19.6.7 600 mm dia. R.C.C. pipe 100 metre 3.20
19.6.8 700 mm dia. R.C.C. pipe 100 metre 3.70
19.6.9 800 mm dia. R.C.C. pipe 100 metre 4.20
456
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
457
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
19.19.2 M D - 10
19.19.2.1 Square shape 450mm internal dimension each 0.128
19.19.2.2 Circular shape 500mm internal diameter each 0.096
19.19.3 H D - 20
19.19.3.1 Circular shape 560 mm internal diameter each 0.096
19.19.4 EHD - 35
19.19.4.1 Circular shape 560 mm internal dia each 0.096
19.21 Making connection of drain or sewer line with existing
manhole and making good the walls, floors with
C.C.(1:2:4) mix.
19.21.1 For pipes 100 to 250 mm diameter each 0.056
19.21.2 For pipes 250 to 300 mm diameter each 0.095
19.21.3 For pipes 350 to 450 mm diameter each 0.153
19.22 Providing sand cast iron drop connection externally for
60 cm drop from branch sewer line to main sewer manhole. :
19.22.1 100 mm dia sand cast iron drop connection each 0.34
19.22.2 150 mm dia sand cast iron drop connection each 0.46
19.23 Extra for depths beyond 60 cm of sand cast iron drop
connection. :
19.23.1 For 100 mm dia. sand cast iron drop connection metre 0.21
19.23.2 For 150 mm dia. sand cast iron drop connection metre 0.26
19.27 Constructing brick masonry road gully chamber 50x45x
60cm in cement mortar (1:4). each 0.93
19.28 Constructing brick masonry road gully chamber 45x45x
77.5 cm in cement mortar (1:4). each 0.82
19.29 Constructing brick masonry road gully chamber 110x50x
77.5 cm in cement mortar (1:4). each 1.66
19.30 Constructing brick masonry chamber for underground
C.I. inspection chamber and bends in cement mortar (1:4).
19.30.1 Inside dimensions 455x610 mm and 45 cm deep
for single pipe line each 0.90
19.30.2 Inside dimensions 500x700 mm and 45 cm
deep for pipe line with one or two inlets each 1.02
19.30.3 Inside dimensions 600x 850 mm and 45 cm deep
for pipe line with three or more inlets each 1.27
19.31 Extra for depth beyond 45 cm of brick masonry chamber :
19.31.1 For 455x610 mm size metre 0.87
19.31.2 For 500x700 mm size metre 0.95
19.31.3 For 600x850 mm size metre 1.12
458
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
19.32 Making soak pit 2.5 m diameter 3.0 metre deep. each 0.072
19.34 Providing and fixing S.W. intercepting trap in manholes
with stiff mixture of cement mortar (1:1).
19.34.1 100 mm dia each 0.013
19.34.2 150 mm dia each 0.019
19.35 P/L Non pressure Np-3 class
19:35:1 450 mm dia RCC pipe 100 Mtrs. 1.20
19:35:2 600 mm dia R.C.C. pipe 100 mtrs. 1.60
19:35:3 900 mm dia R.C.C. pipe 100 mtrs. 2.50
19:35:4 1000 mm dia RCC pipe 100 mtrs. 2.80
19:35:5 1200 mm dia RCC pipe 100 mtrs. 3.40
19:35:6 1800 mm dia RCC pipe 100 mtrs. 4.90
19:36 P/L Non pressure Np-4 class
19:36:1 450 mm dia RCC pipes 100 mtrs. 1.20
19:36:2 600 mm dia RCC pipes 100 mtrs. 1.60
19:36:3 900 mm dia RCC pipes 100 mtrs. 2.50
19:36:4 1000 mm dia RCC pipes 100 mtrs. 2.80
19:36:5 1200 mm dia RCC pipes 100 mtrs. 3.40
19:36:6 1800 mm dia RCC pipes 100 mtrs. 4.90
459
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
20.0 PILE WORK
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
460
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
461
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
22.0 WATER PROOFING
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
22.1 P/L integral cement based treatment for water proofing on
horizontal surface. :
22.1.1 Using rough kota stone sqm 0.342
22.2 P/L integral cement based treatment for water proofing on
the vertical surface. :
22.2.1 Using rough Kota stone sqm 0.443
22.3 P/L water proofing treatment to vertical and horizontal
surfaces of depressed portions of W.C., kitchen and the like
consisting of:
i) Ist course of applying cement slurry @ 4.4 kg/sqm
ii) IInd course of 20mm cement plaster (1:3)
iii) IIIrd course of applying blown or residual bitumen applied
hot at 1.7 Kg. per sqm of area
iv) IVth course of 400 micron thick PVC sheet sqm 0.158
22.5 P/L water proofing treatment in sunken portion of WCs,
bathroom etc. sqm 0.0123
22.6 P/L water proofing treatment on roofs. sqm 0.0195
22.7 P/L integral cement based water proofing treatment on
roofs, balconies, terraces etc. :
22.7.1 With average thickness of 120mm and minimum
thickness at khurra as 65 mm sqm 0.387
22.14 Grading roof for water proofing treatment with
22.14.1 Cement concrete 1:2:4 cum 3.20
22.14.2 Cement mortar 1:3 cum 5.10
22.14.3 Cement mortar 1:4 cum 3.80
462
1.0 COEFFICIENTS FOR CEMENT CONSUMPTION
26.0 NEW TECHNOLOGIES AND MATERIALS
Code Description Unit Quantity of cement
No. per unit quantity of
work (Quintals)
26.31.1 SBR Polymer (@10% of cement weight) modified cementitious
bond coat @2.2 kg cement per sqm. 100 sqm 2.20
26.32 Providing, mixing and applying SBR polymer (of approved
make) modified Cement mortar in proportion of 1:4 (1 cement:
4 graded coarse sand with polymer minimum 2% by wt. of
cement used) .
26.32.1 12 mm average thickness. 100 sqm 5.47
26.32.2 25 mm average thickness in 2 layers. 100 sqm 11.40
26.32.3 50 mm average thickness in 3 layers. 100 sqm 22.80
26.33 Providing, mixing and applying SBR polymer (of approved
make @ minimum 2% by wt. of cement used) modified
plain/reinforced cement concrete for structural members.
26.33.1 50mm thick in Grade M 25 with cement content not less
than 330 kg per cum 100 sqm 16.50
26.33.2 75mm thick in Grade M 25 with cement content not less
than 330 kg per cum 100 sqm 24.75
26.34 Providing and laying SBR Polymer modified (of approved
make @ minimum 2% by wt. of cement used) plain/reinforced
concrete jacket for the structural members e.g. columns,
pillars, piers, beams etc with concrete.
26.34.1 50mm thick in Grade M 25 with cement content not less
than 330 kg per cum 100 sqm 16.50
26.34.2 75mm thick in Grade M 25 with cement content not less
than 330 kg per cum 100 sqm 24.75
26.34.3 100mm thick in Grade M 25 with cement content not less
than 330 kg per cum 100 sqm 33.00
26.35 Providing and injecting approved grout in proportion
recommended by the manufacturer into cracks/honey-comb
area of concrete/masonry by suitable gun/pump.
26.35.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of
weight of cement used) modified Cement slurry made with
non shrink compound in concrete/RCC work 100 kg 1.00
26.35.2 Stirrer mixed SBR Polymer (of approved make) modified
Cement slurry made with Shrinkage Compensating Cement
in concrete/RCC work. 100 kg 1.00
26.38 "Shotcreting R.C.C. columns, beams and slabs etc. in layers
with approved design mix concrete having ."
26.38.1 25mm thick in Grade M 25 with cement content not less than
330 kg per cum 100 sqm 10.31
26.38.2 50mm thick in Grade M 25 with cement content not less than
330 kg per cum 100 sqm 20.63
26.38.3 75mm thick in Grade M 25 with cement content not less than
330 kg per cum 100 sqm 30.94
26.46 Providing and fixing in position, 200 mm thick factory made
Expanded Polystyrene Core (EPS Core) wall panels consisting
of EPS core sandwiched between two Engineered sheets of
welded wire fabric mesh.....................applying the layer of
50 mm thick cement mortar 1:3 {1 cement: 3 coarse sand 100 sqm 51.00
26.47 Providing and fixing in position, 230mm thick factory made
Expanded Polystyrene Core (EPS Core) roof/floor panels...........
applying a layer of 60-65 mm thick cement mortar 1: 3 {1 cement:
3 coarse sand............ applying 70-75 mm thick layer of cement
concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone
aggregate 20 mm nominal size). 100 sqm 58.60
COEFFICIENTS FOR CEMENT CONSUMPTION S.H. : 26.0 NEW TECHNOLOGIES AND MATERIALS
463
COEFFICIENTS
FOR BITUMEN
CONSUMPTION
464
2.0 COEFFICIENTS FOR BITUMEN CONSUMPTION
16.0 ROAD WORK
Code Description Unit Quantity of bitumen
No. per unit quantity of
work (Quintals)
SURFACE DRESSING
16.25 Surface dressing on new surface with paving bitumen
of grade VG -10. sqm 0.0225
16.26 Surface dressing on new surface in two coats with bitumen
of grade VG -10. sqm 0.029
16.27 Surface dressing on old surface with hot bitumen of grade
VG -10. sqm 0.0195
16.28 Surface dressing one coat on new surface :
16.28.1 Using bitumen emulsion sqm 0.0195
16.29 Surface dressing one coat on old surface :
16.29.1 Using bitumen emulsion sqm 0.0122
PREMIX CARPET
16.30 Providing and applying tack coat with bitumen of grade
VG-10 :
16.30.1 On W.B.M. @ 0.75 Kg / sqm sqm 0.0075
16.30.2 On bituminous surface @ 0.50 Kg / sqm sqm 0.0050
16.31 Providing and applying tack coat using bitumen emulsion
(Rapid Setting):
16.31.1.1 On W.B.M @ 0.4kg/sqm sqm 0.0040
16.31.1.2 On bituminous surface @ 0.25kg/sqm sqm 0.0025
16.32 2 cm premix carpet surfacing with paving asphalt
VG-10/VG-30/modified bitumen CRMB 55. sqm 0.0144
16.33 2.5 cm premix carpet surfacing with paving asphalt
VG-10/VG-30/modified bitumen CRMB 55. sqm 0.018
16.34 2 cm premix carpet surfacing with bitumen emulsion. sqm 0.0255*
16.35 2.5 cm premix carpet surfacing with bitumen emulsion. sqm 0.0313*
16.36 Providing and laying Bitumen Penetration Macadam :
16.36. For 50mm compacted thickness with paving
asphalt VG-10 @ 50 kg/10 sqm sqm 0.05
16.36.2 For 75 mm compacted thickness in two layers
with paving asphalt VG-10 @ 68 kg/10 sqm sqm 0.068
MASTIC AND BITUMASTIC WEARING COURSE
16.37 Providing and laying bitumen mastic wearing course:
16.37.1 5 mm thick sqm 0.0588
16.37.2 40 mm thick sqm 0.0941
465
Code Description Unit Quantity of bitumen
No. per unit quantity of
work (Quintals)
16.38 2.5 cm thick bitumastic sheet with hot bitumen, paving
asphalt VG-10/VG-30/modified bitumen CRMB 55. sqm 0.0303
16.39 4 cm thick bitumastic sheet with hot bitumen, paving
asphalt VG-10/VG-30/modified bitumen CRMB 55. sqm 0.0479
SEAL COAT
16.40 P/L seal coat using 128 kg of bitumen of grade VG-10. sqm 0.0077
16.41 P/L seal coat using 98 kg of bitumen of grade VG-10. sqm 0.0098
16.54 P/L Dense Bituminous macadam :
16.54.1 50 to 100 mm average compacted thickness with
bitumen of grade VG-30 @ 5% (percentage by weight
of total mix) and lime filler @ 2% (percentage by weight
of Aggregate) prepared in Batch Type Hot Mix
Plant of 100-120 TPH capacity. cum 1.1538
16.54.2 50 to 100 mm average compacted thickness with
bitumen of grade VG-30 @ 5% (percentage by weight
of total mix) and lime filler @ 2% (percentage by weight
of Aggregate) prepared in Drum Type Hot Mix
Plant of 60-90 TPH capacity. cum 1.1538
16.55 Providing and laying Bituminous Macadam.
16.55.1 50 to 100 mm average compacted thickness with
bitumen of grade VG-30 @ 3.50% (percentage by
weight of total mix) prepared in Batch Type Hot Mix
Plant of 100-120 TPH capacity. cum 0.7683
16.55.2 50 to 100 mm average compacted thickness with
bitumen of grade VG-30 @ 3.50% (percentage by
weight of total mix) prepared in Drum Type Hot Mix
Plant of 60-90 TPH capacity. cum 0.7683
16.56 Providing and laying Semi Dense Bituminous concrete
16.56.1 25 mm compacted thickness with bitumen of grade
VG-30 @ 5% (percentage by weight of total mix) and
lime filler @ 2% (percentage by weight of Aggregate)
prepared in Batch Type Hot Mix Plant of 100-120 TPH
capacity. 100 sqm 2.8846
16.56.2 25 mm compacted thickness with bitumen of grade
VG-30 @ 5% (percentage by weight of total mix) and
lime filler @ 2% (percentage by weight of Aggregate)
prepared in Drum Type Hot Mix Plant of 60-90 TPH
capacity. 100 sqm 2.8846
16.57 P/L Bituminous Concrete :
16.57.1 40/50 mm compacted thickness with bitumen of grade
VG-30 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) prepared in Batch Type Hot Mix Plant of
100- 120 TPH capacity. cum 1.2958
466
Code Description Unit Quantity of bitumen
No. per unit quantity of
work (Quintals)
16.57.2 40/50 mm compacted thickness with bitumen of grade
VG-30 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) and waste plastic additive @ 8%
(percentage by weight of bitumen) prepared in Batch
Type Hot Mix Plant of 100-120 TPH capacity. cum 1.2958
16.57.3 40/50 mm compacted thickness with bitumen of grade
PMB-40 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) prepared in Batch Type Hot Mix Plant of
100-120 TPH capacity. cum 1.2958
16.57.4 40/50 mm compacted thickness with bitumen of grade
CRMB-60 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) prepared in Batch Type Hot Mix Plant
of 100-120 TPH capacity. cum 1.2958
16.57.5 40/50 mm compacted thickness with bitumen of grade
VG-30 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) prepared in drum Type Hot Mix Plant of
60-90 TPH capacity. cum 1.2958
16.57.6 40/50 mm compacted thickness with bitumen of grade
VG-30 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) and waste plastic additive @ 8% (percen-
tage by weight of bitumen) prepared in drum Type
Hot Mix Plant of 60-90 TPH capacity. cum 1.2958
16.57.7 40/50 mm compacted thickness with bitumen of grade
PMB-40 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) prepared in drum Type Hot Mix Plant of
60-90 TPH capacity. cum 1.2958
16.57.8 40/50 mm compacted thickness with bitumen of grade
CRMB-60 @ 5.5% (percentage by weight of total mix)
and lime filler @ 3% (percentage by weight of
Aggregate) prepared in Drum Type Hot Mix Plant
of 60-90 TPH capacity. cum 1.2958
467
2.0 COEFFICIENTS FOR BITUMEN CONSUMPTION
22.0 WATER PROOFING
Code Description Unit Quantity of
No. bitumen per unit
quantity of work
(Quintals)
22.3 P/L water proofing treatment to vertical and horizontal
surfaces of depressed portions of W.C., kitchen and the like. sqm 0.017
22.6 P/L water proofing treatment on roofs with cement slurry &
fibre glass cloth. sqm 0.0097
22.8 P/L four courses water proofing treatment with bitumen
felt over roofs:
22.8.1 Bitumen felt (hessian base)type 3 grade I sqm 0.029
22.9 P/L six courses water proofing treatment with bitumen felt
over roofs applied hot @ 1.45, 1.20 & 1.45 for 1st, 3rd and
5th course. sqm 0.041
22.10& P/L six courses water proofing treatment with bitumen felt
22.11 over roofs applied hot @ 1.45, 120 & 1.70 for 1st, 3rd and
5th course. sqm 0.0435
22.15 P/L in situ seven course water proofing treatment with
APP (1.5 mm thick @ 2.25 kg./sqm). sqm 0.036
22.16 P/L in situ five course water proofing treatment with
APP (2.00 mm thick @ 3.00 kg./sqm). sqm 0.024
22.17 P/L in situ seven course water proofing treatment with
APP (2.00 mm thick @ 3.00 kg./sqm). sqm 0.036
22.18 P/F APP.
22.18.1 2 mm (for corrugated roof sheets) sqm 0.0035
22.19 P/L APP modified prefabricated five layer, 3 mm thick water
proofing membrane. Tear strength in longitudinal and
transverse direction as 60/80N.
22.19.1 3 mm thick sqm 0.0035
22.20 P/L APP modified prefabricated five layer 3 mm thick water
proofing membrane. Tear strength in longitudinal and
transverse direction as 300/250N.
22.20.1 3 mm thick sqm 0.0035
468