Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

1) Create a document with the text given below and save it as First.

Doc

A Read only Memory is a memory unit that performs the read operation only, it does
not have a write capability. This implies that binary information stored in a ROM is
made permanent during the hardware production of the unit and cannot be altered
by writing different words into it. Whereas a RAM is a general-purpose device whose
contents can be altered during the computational process, a ROM is restricted to
reading words that are permanently stored with in the unit. The binary information
to be stored, specified by the designer, is then embedded in the unit to form the
required interconnection pattern.

Do the following

1. Replace ROM with Read Only Memory in the entire document


2. Underline the text Read Only Memory
3. Make an auto correct entry for ROM and it should be replaced by Read Only
Memory

2) Use first.doc to perform the following operations


a) Make the first line of document bold
b) Make the second line italic
c) Underline the third line
d) Align the fourth line to center
e) Make the font color of first line as red
f) Change the font style of fifth line to Arial
g) Change the second line to 18 points
h) Insert the date & time at the start of document

3) Insert a table. The table should have 5 columns. The auto behavior should be
Fixed column width. The following report has to be created in the table.

Sr. No. Name Basic Pay Designation Department


1 Rahul Roy 10000/- MD Marketing
2 Ritu Garg 12000/- AD Sales
3 Mohit 8000/- Manager Sales
4 Rakesh 9000/- Senior Manager HR

(a) Heading should have a font size of 18, color should be blue and font
should be bold.
(b) The data should have a font size of 12, color should be Red and font
should be italic
(c) Insert a new row between 3 & 4 and type the data and reorder the sr.
no column.
4) Make a template for the bio-data with the following format
Bio-Data

Name :

Fathers Name :

Date of Birth :

Age :

Address :

Educational Qualification

Sr No Qualification Board Percentage

Work Experience:

5) Excel
SESSION_N ROUND1 ROUND ROUND TOTAL/30 PERCENTA GRADE
O 2 3 0 GE
SS1 56 46 65
SS2 78 56 67
SS3 98 85 81
SS4 71 77 68

Criteria to find GRADE


PERCENTAGE >= 80 ------------------------------------------------------- GRADE A
PERCENTAGE between 79 and 60 (both are inclusive) ---------------- GRADE B
PERCENTAGE between 59 and 50 (both are inclusive) ---------------- GRADE C
Otherwise ---------------------------------------------------------------------- GRADE F
(a) Find out TOTAL and PERCENTAGE of all sessions using function or formula. (1)
(b) Find out GRADE using above specified criteria of all sessions. (1)
(c) Using SESSION_NO and PERCENTAGE create a line chart. (2)

You might also like