Kat - Ersce - Eng
Kat - Ersce - Eng
Kat - Ersce - Eng
switches
Safety
switches
Quick Reference
ERSCE
Powertools switches
powertools switches
page 167
114 C ATA L O G U E 2 0 1 1
Position switches
Overview The position switches are ERSCEs main product, and are the result of more than 40 years of
experience in industrial automation.
They are suitable for use in the most different environmental conditions, thanks to their solid
construction, IP66 certified, and proven reliability over decades of fieldwork.
*E100
Casing
Contact block
ERSCE position switches are available in 4 different series E100, E300, E400, each characterized
by different technical solutions and mounting options.
Each series comprises a metal actuator, the casing is available in PA6 thermoplastic reinforced
with fiberglass (black RAL 9005) or diecast metal alloy (in this case there is a screw for earthing
the switch) painted with baked epoxy powder (gray RAL 7022).
The standard thread for cable input / output is Pg 13,5. 1/2 NPT and M20 threads are available
on request.
Contact All series are provided with a 2 contacts snap action contact block with positive opening of the
blocks NC contact.
Thanks to the careful design and to the use of the best materials, all ERSCE contact blocks are
designed to offer maximum reliability, both electrical and mechanical.
C ATA L O G U E 2 0 1 1 115
Position switches
Actuators There are several standard actuators available with direct, angular and multidirectional movement:
A B C D
Steel plunger Steel roller Thermoplastic Thermoplastic
plunger roller lever, side roller lever, vertical
actuation actuation
B13
Steel roller
plunger
13 mm
E I F L
Side rotary lever Offset side rotary Side rotary Flexible rod
with plastic roller lever with plastic adjustable lever
roller with plastic roller
Maximum versatility:
all actuators are adjustable in steps of 90
10x360
116 C ATA L O G U E 2 0 1 1
Options Cable input / output
on request Position switches with thread for cable input / output M20x1,5 and 1/2 NPT are available on request.
Contact blocks
The following contact blocks are available on request:
Slow action
1NO+1NC
25 17
Overlapping
02 26 18
Zb
Actuators
The following actuators are available on request:
G H E/50 F/50
Side rotary Side rotary Side rotary lever Side rotary
adjustable plastic adjustable with rubber roller adjustable lever
glass fiber rod aluminium rod 50mm diameter with rubber roller
6mm diameter 6mm diameter 50mm diameter
C ATA L O G U E 2 0 1 1 117
Position switches
* between terminals of the same polarity: between terminals with different polarity: between live mechanical parts and ground;
between live mechanical parts and non-current-carrying metal parts
118 C ATA L O G U E 2 0 1 1
Approvals position switches
Switzerland
Federation
Denmark
Germany
Sweden
Russian
Norway
Canada
Canada
Finland
Austria
Britain
Great
USA /
International electrical
Country
Commission
Verband fr Elektrotechnik
Materielkotroll-anstalten
IEC
Shtar-kastuskeskus
Verband Deutscher
Svenska Elektriske
Elektrotechnischer
according to CSA
CSA International
Norges Elektriske
British Standards
Schweizerischer
sterreichischer
UL investigated
Elektrotechiker
Materielkotroll
Materielkotroll
Danmarks
Elektriske
Istitution
GOST
Verein
Authority
(1) (1) (2) (3) (3) (4)
Mark of BS
VDE 0660 IEC 60947
standard C US
C EN 60947
LISTED
E100 + + + + + + + + +
E300 + + + + + + + + +
E400 + + + + + + + + +
E600 + + + + + + + + +
E700 + + + + + + + + +
M3 + + + + + + + + +
Approved
+ conforms to requirements
Notes:
1) UL Approval File E728661
2) CSA Approval File 026716-0-000
3) It is not required to bear a symbol but switches must conform to requirements.
4) IEC does not operate an approval scheme
C ATA L O G U E 2 0 1 1 119
Position switches
V
V max (m/s)
Act. A 0,5
Act. B 0,5
Drive forces
Minimum command force 9N
Minimum forced opening force 28 N
Drive forces
Minimum command force 9N
Minimum forced opening force 28 N
120 C ATA L O G U E 2 0 1 1
Operating
features Roller lever, side travel
Actuator: C
Drive forces
Minimum command force 9N
Minimum forced opening force 26 N
Drive forces
Minimum command force 8N
Minimum forced opening force 26 N
Roller lever
Actuators: E-I-F
C ATA L O G U E 2 0 1 1 121
E100 Series
122 C ATA L O G U E 2 0 1 1
position switches
Steel plunger
Part no. Contact block Circuit diagram Contact travel Pack.
Thermoplastic
E10000AI Snap action 1
1NO+1NC
Metal
E10000AM Snap action 1
1NO+1NC
Thermoplastic
E10000BI Snap action 1
1NO+1NC
Metal
E10000BM Snap action 1
1NO+1NC
Thermoplastic 12,5
20 5
4,2
22
57,5
15 Pg 13,5
32,5
C ATA L O G U E 2 0 1 1 123
E100 Series
Thermoplastic
E10000CI Snap action 1
1NO+1NC
Metal
E10000CM Snap action 1
1NO+1NC
Thermoplastic
E10000DI Snap action 1
1NO+1NC
Metal
E10000DM Snap action 1
1NO+1NC
124 C ATA L O G U E 2 0 1 1
position switches
Thermoplastic
E10000EI Snap action 1
1NO+1NC
Metal
E10000EM Snap action 1
1NO+1NC
Thermoplastic
E10000II Snap action 1
1NO+1NC
Metal
E10000IM Snap action 1
1NO+1NC
C ATA L O G U E 2 0 1 1 125
E100 Series
Thermoplastic
E10000FI Snap action 1
1NO+1NC
Metal
E10000FM Snap action 1
1NO+1NC
126 C ATA L O G U E 2 0 1 1
position switches
Flexible rod
Part no. Contact block Circuit diagram Contact travel Pack.
Thermoplastic
E10000LI Snap action 1
1NO+1NC
Metal
E10000LM Snap action 1
1NO+1NC
C ATA L O G U E 2 0 1 1 127
E300 Series
Contact block
128 C ATA L O G U E 2 0 1 1
position switches
Steel plunger
Part no. Contact block Circuit diagram Contact travel Pack.
C ATA L O G U E 2 0 1 1 129
E300 Series
130 C ATA L O G U E 2 0 1 1
position switches
Flexible rod
Part no. Contact block Circuit diagram Contact travel Pack.
C ATA L O G U E 2 0 1 1 131
E400 Series
132 C ATA L O G U E 2 0 1 1
position switches
Steel plunger
Part no. Contact block Circuit diagram Contact travel Pack.
Metal
Metal
Metal
C ATA L O G U E 2 0 1 1 133
E400 Series
Metal
Metal
Metal
134 C ATA L O G U E 2 0 1 1
position switches
Metal
Flexible rod
Part no. Contact block Circuit diagram Contact travel Pack.
Metal
C ATA L O G U E 2 0 1 1 135
Safety switches
136 C ATA L O G U E 2 0 1 1
Key actuated series - Pull wire series
C ATA L O G U E 2 0 1 1 137
Pull wire series - Hinge series
Hinge series
138 C ATA L O G U E 2 0 1 1
Accessories position switches
Contact blocks
Part no. Contact block Circuit diagram Pack.
11,5
4,4 30 9,5
Z5 90 Key 10
8,6
7
22
36,2
36,2
4,3 13
56
30,4
16
40
13 56
20
C ATA L O G U E 2 0 1 1 139
Accessories
R05 Wire rope thimble, shape A, for rope 5mm - DIN 6899 10
140 C ATA L O G U E 2 0 1 1