SCBTT 270
SCBTT 270
SCBTT 270
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely.
Please keep this manual for future reference.
P PC VQT3D27-3
VQT3D27
2
Downloaded from www.Manualslib.com manuals search engine
IMPORTANT SAFETY
CAUTION
INSTRUCTIONS RISK OF ELECTRIC SHOCK
DO NOT OPEN
Read these operating instructions carefully before using the unit. Follow the
safety instructions on the unit and the applicable safety instructions listed CAUTION: TO REDUCE THE RISK OF ELECTRIC
below. Keep these operating instructions handy for future reference. SHOCK, DO NOT REMOVE SCREWS.
1 Read these instructions. NO USER-SERVICEABLE PARTS
2 Keep these instructions. INSIDE.
3 Heed all warnings. REFER SERVICING TO QUALIFIED
4 Follow all instructions. SERVICE PERSONNEL.
5 Do not use this apparatus near water.
6 Clean only with dry cloth. The lightning flash with arrowhead symbol, within
7 Do not block any ventilation openings. Install in accordance with the an equilateral triangle, is intended to alert the user
manufacturers instructions. to the presence of uninsulated dangerous
8 Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat. voltage within the products enclosure that may be
9 Do not defeat the safety purpose of the polarized or grounding-type plug. of sufficient magnitude to constitute a risk of
A polarized plug has two blades with one wider than the other. electric shock to persons.
A grounding-type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided The exclamation point within an equilateral triangle
plug does not fit into your outlet, consult an electrician for replacement of is intended to alert the user to the presence of
the obsolete outlet. important operating and maintenance (servicing)
10 Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the instructions in the literature accompanying the
apparatus. appliance.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
(Inside of product)
CAUTION
Unit
This unit utilizes a laser. Use of controls or adjustments or performance of
procedures other than those specified herein may result in hazardous
radiation exposure.
Do not place sources of naked flames, such as lighted candles, on this unit.
Placement
To reduce the risk of fire, electric shock or product damage,
Do not install or place this unit in a bookcase, built-in cabinet or in another
confined space. Ensure this unit is well ventilated.
Do not obstruct this units ventilation openings with newspapers,
tablecloths, curtains, and similar items.
VQT3D27
3
Downloaded from www.Manualslib.com manuals search engine
Table of contents
IMPORTANT SAFETY INSTRUCTIONS ......... 3
POWER-SAVING FEATURES .................................. 7 TV
Main unit (Rear)................................................................ 7
Playable discs/Cards........................................ 8 Enjoying TV with units speakers.................... 30
Unit and media care ......................................... 9 Surround sound effects.................................................. 30
Sound modes................................................................. 30
Using the remote control .................................. 9
Linked operations with the TV
STEP 1 : Preparing the speakers................... 10
(VIERA LinkTM HDAVI ControlTM).................. 31
Assembling the speakers ............................................... 10
Setting the audio link ..................................................... 31
Preparing cables and making connection ...................... 11
Easy control only with VIERA remote control ................ 32
STEP 2 : Positioning ...................................... 12
STEP 3: Connections..................................... 13
Speaker cable connection .............................................. 13 Other devices
Connection to a TV ........................................................ 14
Connection with Set Top Box, etc. ................................. 16
Using the iPod/iPhone .................................... 32
Radio antenna connection ............................................. 16
iPod/iPhone Connection ................................................ 32
[BTT770] Digital transmitter connection............................ 17
iPod/iPhone Playback.................................................... 33
Connection to a broadband network .............................. 17
STEP 4:
AC power supply cord connection.................. 18 Advanced operations
STEP 5: [BTT770]
Preparing the wireless system ....................... 18 Enjoying VIERA CASTTM ................................ 34
STEP 6: Easy setup ....................................... 19 Playback menu ............................................... 35
Network Easy Setting ..................................................... 20 Setup menu .................................................... 37
Reprogramming the remote control................................ 21 Speaker settings ............................................................ 41
Firmware updates........................................................... 22
Inserting or removing media........................... 22
HOME menu .................................................. 23 Optional speaker settings
Enjoying sound effects from all speakers....... 24
Enjoying surround sound effects .................................... 24
Speaker installation option ............................. 42
Playback Reference
VQT3D27
4
Downloaded from www.Manualslib.com manuals search engine
Getting started
Indicates features applicable to:
This Owners Manual is applicable to models
[BTT770]: SC-BTT770 only
SC-BTT770, SC-BTT370, SC-BTT270 and SC-BTT273.
Unless otherwise indicated, illustrations in this Owners [BTT370]: SC-BTT370 only
Getting started
Manual are of SC-BTT770. [BTT270]: SC-BTT270 only
Operations in this Owners Manual are described mainly [BTT273]: SC-BTT273 only
with the remote control, but you can perform the
operations on the main unit if the controls are the same.
Playback
Surround speakers SB-HS270 SB-HS270 SB-HS270 SB-HS270
Subwoofer SB-HW370 SB-HW370 SB-HW270 SB-HW270
Wireless system (with digital transmitter) SH-FX71
Some accessories and external devices mentioned in this Owners Manual that are not included with this product may
not be on sale in certain regions.
Please note that the actual controls and components, menu items, etc. of your Blu-ray Disc Home Theater Sound
System may look somewhat different from those shown in the illustrations in this Owners Manual.
Radio
Accessory
Check the supplied accessories before using this unit.
For accessories of speakers, refer to page 10.
[BTT770] [BTT370] [BTT270] [BTT273]
1 Remote control 1 Remote control 1 Remote control 1 Remote control
(N2QAYB000632) (N2QAYB000632) (N2QAYB000629) (N2QAYB000629)
TV
2 Batteries for remote 2 Batteries for remote 2 Batteries for remote 2 Batteries for remote
control control control control
1 Sheet of speaker cable 1 Sheet of speaker cable 1 Sheet of speaker cable 1 Sheet of speaker cable
sticker sticker sticker sticker
1 FM indoor antenna 1 FM indoor antenna 1 FM indoor antenna 1 FM indoor antenna
Other devices
(RSAX0002) (RSAX0002) (RSAX0002) (RSAX0002)
2 AC power supply cord 1 AC power supply cord 1 AC power supply cord 1 AC power supply cord
(K2CB2CB00021) (K2CB2CB00021) (K2CB2CB00021) (K2CB2CB00021)
Advanced operations
(RFAX0023) with a
ferrite core
1 Digital transmitter 1 HDMI cable
(RFAX1012B) (K1HA19DA0005)
Optional speaker
[For_Canada] settings
The enclosed Canadian French label sheet corresponds to the Product numbers provided in this Owners Manual correct as of December
English display on the front and back side of the unit. 2010. These may be subject to change.
Do not use AC power supply cord with other equipment.
[For_U.S.A._and_Puerto_Rico.]: To order accessories, refer to Accessory
Purchases (United States and Puerto Rico) on page 50.
[For_Canada]: To order accessories, call the dealer from whom you have
made your purchase.
Reference
VQT3D27
5
Downloaded from www.Manualslib.com manuals search engine
Control reference guide
13 Remote control
1 1 Turn the unit on and off
2 Select title numbers, etc./Enter numbers or characters
( 34)
[CANCEL]: Cancel
2 3 Select the source ( 22)
14 4 Basic playback control buttons ( 25)
5 Select preset radio stations
6 Show status messages ( 25)
15 7 Display the Home screen of VIERA CAST ( 34)
8 Selection/OK, Frame-by-frame ( 25)
3 16 9 Show sub menu ( 26)
10 These buttons are used when;
4
17 Operating a BD-Video disc that includes JavaTM
applications (BD-J).
Operating contents of VIERA CAST ( 34)
11 Set the sound mode ( 24)/Select speaker channel
5 ( 24)
12 Select surround sound effects ( 24)/Set the sleep timer
6 18 1 Press and hold [SLEEP].
2 While SLEEP is displayed, press [SLEEP]
19 several times to select the time (in minutes).
7 20
21 13 TV operation buttons
9 []: Turn the television on and off
[AV, INPUT]: Switch the input select
10 [i j VOL]: Adjust the volume
14 Adjust the volume of the main unit
11 22 15 Mute the sound
12 MUTE flashes on the units display, while the function is
23 on.
To cancel, press the button again or adjust the volume.
Muting is canceled if the unit is turned off.
16 Show NETFLIX screen
17 Select radio stations manually ( 29)
18 Exit the menu screen
19 Show HOME menu ( 23)
20 Show Pop-up menu/Top menu/Direct Navigator ( 25)
21 Return to previous screen
22 [BTT770] [BTT370] : Start up a video communication ( 34)
23 Show Playback menu ( 35)/Select audio ( 25)
VQT3D27
6
Downloaded from www.Manualslib.com manuals search engine
Main unit (Front)
Getting started
1 2 3
Pull open.
iPod
SD CARD
4 5 6 7 8 9 10
1 Standby/on switch (POWER /I) (> 19) 6 Start play (> 25)
Press to switch the unit from on to standby mode or vice 7 SD card slot (> 22)
versa. In standby mode, the unit is still consuming a small 8 Remote control signal sensor
amount of power. Distance: Within approx. 7 m (23 ft.)
2 Open or close the disc tray (> 22) Angle: Approx. 20o up and down, 30o left and right
3 Adjust the volume of the main unit 9 Display
4 Disc tray 10 Connect iPod/iPhone (> 32)
5 Stop (> 25)
POWER-SAVING FEATURES
The main unit is designed to conserve its power consumption and save energy.
[BTT770] [BTT370] Wireless system (SH-FX71) does not have this function.
e.g.
Automatic power-down function
jThere is no audio signal from an external device.
The main unit will automatically switch to standby mode after
jDisc playback is stopped/paused.
30 minutes if the main unit is inactive as follows.
jiPod/iPhone playback is stopped/paused.
jThe disc menu is displayed and play is not selected.
(This function may not work depending on the application
type of discs.)
1 2 3 4 5 6 7 8 9 10 11 12 13
6 5 2 1 4 3
3 3 R 3 L R 3 L COMMUNICATION LAN FM ANT AUX
SUBWOOFER CENTER FRONT SURROUND CAMERA 75
VQT3D27
7
Downloaded from www.Manualslib.com manuals search engine
Playable discs/Cards
Type Logo Type detail Playable contents
examples ( 49)
BD-Video Video
Video
[BD] BD-RE
JPEG/MPO (3D still picture)
BD-R Video
DVD-Video Video
DVD-R
Video
AVCHD
[DVD] MP3
DVD-R DL JPEG/MPO (3D still picture)
DVD-RW Video
AVCHD
+R/+RW/+R DL
1
1 ALL 2
4
VQT3D27
8
Downloaded from www.Manualslib.com manuals search engine
Finalize SD card
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by miniSD Cards, microSD Cards, microSDHC
Getting started
a recorder, etc. needs to be finalized by the recorder to play on Cards and microSDXC Cards can be used, but
this unit. Please refer to the recorders instructions. must be used with an adaptor card. These are
usually supplied with such cards, or otherwise
BD-Video customer provided.
This unit supports high bit rate audio (Dolby Digital Plus, Dolby Keep the Memory Card out of reach of children
TrueHD, DTS-HD High Resolution Audio and DTS-HD Master to prevent swallowing.
Audio) adopted in BD-Video. To protect the cards contents, move the record prevention
tab (on the SD card) to LOCK.
Music CD This unit is compatible with SD Memory Cards that meet SD
Operation and sound quality of CDs that do not conform to Card Specifications FAT12 and FAT16 formats, as well as
CD-DA specifications (copy control CDs, etc.) cannot be SDHC Memory Cards in FAT32 format (Does not support
guaranteed. long file name.) and SDXC Memory Cards in exFAT.
The digital audio content side of a DualDisc does not meet If the SD card is used with incompatible computers or
the technical specifications of the Compact Disc Digital devices, recorded contents may be erased due to the card
Audio (CD-DA) format so playback may not be possible. being formatted etc.
Useable memory may be slightly less than the card capacity.
3D
3D videos and 3D still pictures can be played back when this
It may not be possible to play the above media in some cases due to the
unit is connected to a 3D compatible TV using a High Speed type of media, the condition of the recording, the recording method and
HDMI Cable. how the files were created.
2D video can be enjoyed as 3D virtually. ( 27) The producers of the disc can control how discs are played. So you may
not always be able to control play as described in this Owners Manual.
Read the discs instructions carefully.
[BTT370] [BTT273]
2 Front speakers 5 Speaker cables 2 Screws A
(REEX1266A: RED) (XTB4i12GFJK)
(REEX1267A: WHITE)
2 Bases (REEX1268: GREEN)
(RYK1637-K) (REEX1269: GRAY)
(REEX1270: BLUE)
[BTT270]
5 Speaker cables
(REEX1266A: RED) (REEX1269: GRAY)
(REEX1267A: WHITE) (REEX1270: BLUE)
(REEX1268: GREEN)
Screw A
Tighten
securely. 2
2 Insert the wire
fully.
r: White
s: Blue line Push!
Screw B
Press into the groove. 1
Tighten securely.
Leave about 80 mm (3 5/32q)
VQT3D27
10
Downloaded from www.Manualslib.com manuals search engine
[BTT370] [BTT273]
Getting started
through the base. r: White
Use cables with a white connector
and red connector.
s: Blue line
Push!
A Speaker cable sticker (supplied)
B Connector
Speaker cable sticker Color
1 FRONT (L) WHITE r: White
2 FRONT (R) RED s: Blue line
3 SURROUND (L) BLUE
4 SURROUND (R) GRAY
5 CENTER GREEN Push!
6 SUBWOOFER PURPLE
Be sure to match the number on each sticker with the
connector color.
Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.
Dont use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.
Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.
VQT3D27
11
Downloaded from www.Manualslib.com manuals search engine
STEP 2 : Positioning
Caution
The main unit and supplied speakers are to be used only as indicated in this setup. Failure to do so may lead to damage to the
amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if
you experience a sudden change in performance.
Do not attempt to attach these speakers to walls using methods other than those described in this manual.
Do not touch the front netted area of the speakers. Hold by the sides.
How you set up your speakers can affect the bass and the sound field.
Keep your speakers at least 10 mm (13/32z) away from the system for [BTT770]
proper ventilation.
Wireless system
To avoid interference, maintain the following distances
between the wireless system and other electronic devices
that use the same radio frequency (2.4 GHz band).
60
Wireless Wireless LAN:
System approx. 2 m (61/2 ft.)
12
Downloaded from www.Manualslib.com manuals search engine
STEP 3: Connections
Turn off all equipment before connection and read the appropriate owners manual.
Getting started
Do not connect the AC power supply cord until all other connections are complete.
Wireless System
Main unit
SPEAKERS
ENCEINTES
LS / RB LB / RS
6 5 2 1 4 3
3 3 R 3 L R 3 L
SUBWOOFER CENTER FRONT SURROUND
SURR
Surround selector
Do not connect the surround speaker cables to the main unit
L
SIDE
R SURROUND (3 - 6 )
SIDE AMBIOPHONIQUES The surround selector switch
when using the wireless system. must be set in the center
position.
6 PURPLE Subwoofer
5 GREEN Center speaker
2 RED Front speaker (Rch)
1 WHITE Front speaker (Lch)
6 PURPLE Subwoofer
5 GREEN Center speaker
2 RED Front speaker (Rch)
1 WHITE Front speaker (Lch)
4 GRAY Surround speaker (Rch)
Main unit 3 BLUE Surround speaker (Lch)
[BTT370]
When using the optional wireless system, do not attempt
3
6 5
3
2 1
R 3 L
4 3
R 3 L to connect any extra surround or surround back speakers
SUBWOOFER CENTER FRONT SURROUND VQT3D27
to the main unit.
13
Downloaded from www.Manualslib.com manuals search engine
Connection to a TV
The basic connection is shown in the included Easy Setting Guide, however, there are more connection examples to optimize
your system setting.
Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
Turn off all equipment before connection.
OPTICAL IN
After making the digital audio connection, make settings to suit the type of audio from your digital equipment. ( 25)
HDMI
The HDMI connection supports VIERA Link HDAVI Control ( 31) when used with a compatible Panasonic TV.
Please use High Speed HDMI Cables that have the HDMI logo (as shown on the back cover). It is recommended that you use
Panasonics HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.
Recommended part number (High Speed HDMI Cable):
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.
Audio will be output through the system's speakers when Off is selected in HDMI Audio Output. ( 39)
TV
VIDEO IN
To enjoy TV audio from this home theater
AUDIO IN
systems speakers:
AUDIO OUT
L L
2 Select AUX as a source ( 23).
AUX A Audio cable (not supplied)
B Video cable (not supplied)
AUX
VIDEO OUT
TV OPTICAL
VIDEO IN
To enjoy TV audio from this home theater
OUT
systems speakers:
AUDIO IN
VQT3D27
14
Downloaded from www.Manualslib.com manuals search engine
Connection for the best picture and audio
When connecting to a TV using an HDMI cable, check the HDMI terminal on the TV. If the HDMI terminal is labeled
Getting started
HDMI (ARC), you can connect the unit simply with a single HDMI cable.
It is possible to playback 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.
For details, refer to the operating instructions of your TV.
What is ARC?
TV
ARC is an abbreviation of Audio Return Channel, also known
as HDMI ARC. It refers to one of the HDMI functions. When
you connect the unit to the terminal labeled HDMI (ARC), the
HDMI
optical digital audio cable that is usually required in order to
(ARC)
listen to sound from TV is no longer required, and TV pictures
and sound can be enjoyed with a single HDMI cable.
A HDMI cable
[BTT770] [BTT370] [BTT270] : not supplied
[BTT273] : supplied
TV
To enjoy TV audio from this home theater
systems speakers:
OPTICAL
1 Connect the TV and the main unit with the
HDMI OUT
Optical digital audio cable (not supplied).
2 Select DIGITAL IN or D-IN as a source
(> 23).
A HDMI cable
[BTT770] [BTT370] [BTT270] : not supplied
[BTT273] : supplied
B Optical digital audio cable (not supplied)
VQT3D27
15
Downloaded from www.Manualslib.com manuals search engine
Connection with Set Top Box, etc.
[BTT770] [BTT370] When the connecting devices have an HDMI terminal
e.g., A HDMI cable (not supplied)
B Set Top Box (Cable/Satellite), etc.
TV
C Other devices (Video game, etc.)
Make sure that the HDMI cable connection is made to enjoy
AV IN
(ARC)
AV OUT AV OUT the videos from the Set Top Box, etc. Futhermore, select
HDMI Input1 or HDMI Input2 as a source.
HDMI IN 2
HDMI AV OUT
(ARC) HDMI IN 1(CABLE/SAT)
OPTICAL
1 Connect the STB and the main unit with the
Optical digital audio cable (not supplied).
OUT
Main unit
e.g.,
Main unit
FM ANT
75
FM ANT
75
Getting started
Do not insert or remove while the home DO DO NOT
theater unit is on.
LAN
A LAN Cable (not supplied) A Main unit (Wireless LAN is built in.)
B Broadband router, etc. B Wireless router, etc.
C Modem (Broadband) *Provided by ISP C LAN Cable (not supplied)
D Modem (Broadband) *Provided by ISP
Use category 5 or above straight LAN cables (STP) when For up to date compatibility information on your Wireless
connecting to peripheral devices. router refer to
Inserting any cable other than a LAN cable in the LAN http://panasonic.jp/support/global/cs/
terminal can damage the unit. (This site is in English only.)
The unit is not compatible with public wireless LAN
services provided in airports, stations, cafes etc.
For additional information about this unit refer to
http://www.panasonic.com/consumer/support (For U.S.A.)
17
Downloaded from www.Manualslib.com manuals search engine
STEP 4: AC power supply cord connection
Connect only after all other connections are complete.
AC IN [BTT770]
Wireless System
AC power supply cord
Main unit with a ferrite core is for the
wireless system. Do not
use any other AC power
supply cord except the
supplied one.
A AC power supply cord (supplied) A AC power supply cord (supplied)
B To a household AC outlet B To a household AC outlet
Main unit
This unit consumes a small amount of AC power, even when it is turned off.
[BTT770] [BTT370] : approx. 0.05 W*, [BTT270] [BTT273]: approx. 0.4 W*
* When the Quick Start setting is Off
In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC outlet.
Wireless system [BTT770]: approx. 0.2 W
Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.
VQT3D27
18
Downloaded from www.Manualslib.com manuals search engine
STEP 6: Easy setup
Getting started
The Easy setup assists you to make necessary
settings.
1 Press [].
Setup screen appears.
Follow the on-screen prompts to make basic settings for the
If this unit is connected to a Panasonic TV (VIERA)
system.
supporting HDAVI Control 2 or later via an HDMI cable,
then setting information on the TV such as On-screen
Language is acquired by this unit.
2 Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
[BTT770] [BTT370]
Wireless System
You can perform this setup anytime by selecting Easy setup in the Setup
menu. (> 40)
VQT3D27
19
Downloaded from www.Manualslib.com manuals search engine
Search for wireless network
Network Easy Setting The available wireless networks will be displayed.
The configuration of your network is about to begin. If you 1 Select your network name and press [OK].
If your network name is not displayed search again by
failed to make the settings, refer to page 21
pressing the [R] button on the remote control. Stealth
SSID will not be displayed, in this case enter manually.
Wired connection Wireless Settings
Select a wireless network for connection.
Wired
Wireless When your wireless network is encrypted
OK 2 Press [OK] to select Encryption Key.
RETURN
Encryption Key
Preparation
Obtain your network name ( 21, SSID).
3 Enter your encryption key.
If your wireless connection is encrypted please be sure
that you know your encryption key. Encryption Key
_
SSID
Set
VQT3D27
20
Downloaded from www.Manualslib.com manuals search engine
Network Easy Setting (Internet Connection Check)
When you experience problems Network Easy Setting (Internet Connection Check)
with settings
Getting started
Complete.
- Connection to the Internet : Fail(Error code: B019)
Wireless Setting
Failed the connection test.
Wireless Settings Cannot find the server.(Error code: B019)
Please refer to the owner's manual for the cause of
Failed to complete. the error and the solution for it.
Press [OK].
A conflict with another device occurred.
Check the
Display
following
1. LAN cable connection or Connection of Reprogramming the remote
:Fail
Wireless setting the LAN
cables ( 17)
control
2. IP address setting :Fail
3. Connection to gateway :Fail If you have more than one Panasonic player/recorder and the
1. LAN cable connection or :Pass Connection remote control operates both products at once, you will
Wireless setting and settings of need to change the remote control code on one product to
2. IP address setting :Fail the hub and prevent this occurrence. ( 40, Remote Control Code)
router
3. Connection to gateway :Fail
Settings of IP
1. LAN cable connection or :Pass Address /
Wireless setting
DNS Settings
2. IP address setting :Pass ( 40)
3. Connection to gateway :Fail
VQT3D27
21
Downloaded from www.Manualslib.com manuals search engine
Firmware updates Inserting or removing
Occasionally, Panasonic may release updated firmware for this
unit that may add or improve the way a feature operates.
media
These updates are available free of charge.
OK
control
If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the following
website and burn it to a CD-R to update the firmware. Button Source
http://panasonic.jp/support/global/cs/ Select disc drive or SD card drive
(This site is in English only.) DISC/SD
To show the firmware version on this unit. ( 40, System Information) BD/DVD or SD card (SD) ( 25)
Downloading will require several minutes. It may take longer or may
not work properly depending on the connection environment. RADIO/EXT-IN
Select iPod/iPhone, FM tuner or external
If you do not want to check for the latest firmware version, set Automatic iPod audio as the source
Update Check to Off. ( 40) iPod (IPOD) ( 32)
FM Radio (FM) ( 29)
To enjoy sound from the TV ( 30)
AUX*1
ARC*1
DIGITAL IN*1(D-IN)
To enjoy sound from other devices
( 30)
DIGITAL IN*2(D-IN)
[BTT770] [BTT370]
HDMI IN1/HDMI IN2 ( 16)
Items to be displayed may vary with the media.
When the selector is switched, it may take time to playback the selected
video and/or audio.
*1 (TV) is displayed next to items set for TV AUDIO input.
*2 (CABLE/SATELLITE) is displayed next to DIGITAL IN when set for
CABLE/SATELLITE AUDIO input.
VQT3D27
22
Downloaded from www.Manualslib.com manuals search engine
HOME menu Videos/
Photos/
Disc Play back the contents.
( 25, 28, 29)
Music SD card When multiple contents are
Getting started
Major functions of this unit can be operated from the HOME
menu. recorded, select the types
Preparation of contents or the title.
Turn on the television and select the appropriate video input on Internet Displays the Home screen of VIERA CAST
the television. Content ( 34)
iPod All
1 Press [] to turn on the unit.
2 Press [3, 4, 2, 1] to select the item and Music ( 32)
press [OK]. Videos
FM
To enjoy the FM radio ( 29)
HOME Radio
Internet
EXT IN FM Radio
Home theater Content
EXT IN AUX*1 When using an Audio cable
Items to be displayed may vary with the media.
When the selector is switched, it may take time to playback the selected
video and/or audio.
*1 (TV) is displayed next to items set for TV AUDIO input.
*2 (CABLE/SATELLITE) is displayed next to DIGITAL IN when set for
CABLE/SATELLITE AUDIO input.
VQT3D27
23
Downloaded from www.Manualslib.com manuals search engine
The channels not included in the playing audio will not
Enjoying sound effects be displayed (subwoofer is displayed even if it is not
included).
from all speakers 3 Press [3] (increase) or [4] (decrease) to adjust the
speaker level for each speaker.
s6 dB to r6 dB
L R C RSRB* LB*LS SW
* When the optional surround back speakers are connected.
L R: Front speaker
(left and right: only the balance is adjustable.)
Press [2, 1] to adjust the balance of the front
speakers.
C: Center speaker
RS: Surround speaker (right)
RB*: Surround back speaker (right)
LB*: Surround back speaker (left)
LS: Surround speaker (left)
VQT3D27 SW: Subwoofer
24
Downloaded from www.Manualslib.com manuals search engine
Playing video contents
Playback
Search/Slow-motion
Getting started
[BD] [DVD] [CD] [SD] Search
While playing, press [SEARCH6] or
1 Insert the media.
If the menu is displayed, press [OK] or [3, 4, 2, 1] to [SEARCH5].
select the item. ( 23) Music and MP3: The speed is fixed to a single step.
Playback
BD-Video and AVCHD: Forward direction [SEARCH5]
3D compatible video software, play back in accordance
only.
with the instructions.
The speed increases up to 5 steps.
To show menus Press [1 PLAY] to revert to normal playback speed.
You can show Top Menu, DIRECT NAVIGATOR or Pop-up Menu.
Press [POP-UP MENU, TOP MENU].
Press [3, 4, 2, 1] to select the item and press [OK].
Skip
To show the status messages While playing or paused, press [:] or [9].
While playing, press [STATUS]. Skip to the title, chapter or track you want to play.
The status messages give you information about what is currently Each press increases the number of skips.
being played. Each time you press [STATUS], the display
information may change or will disappear from the screen.
Frame-by-frame
e.g. BD-Video
T: Title, C: Chapter, PL: Playlist
While paused, press [2] (2;) or [1] (;1).
Elapsed time in the title
Press and hold to change in succession forward or
T1 C1 0:05.14
BD-Video backward.
Play Press [1 PLAY] to revert to normal playback speed.
0:20.52
BD-Video and AVCHD: Forward direction [1] (;1) only.
Current position Total time
DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press
Changing audio
[STOP] when you finish to preserve the units motor and your television
screen.
Depending on media and contents, the display may change or may not
appear. 1 Press and hold [jAUDIO] to activate the
It is not possible to playback AVCHD and MPEG2 video which have been audio setting mode.
dragged and dropped, copied and pasted to the media.
2 Press [jAUDIO] several times to select the
audio.
You can change the audio channel number or soundtrack
Other operations during play language, etc.
These functions may not work depending on the media and its Selecting the type of audio from the
contents.
DIGITAL AUDIO IN terminal
Stop Select to suit the type of audio from the DIGITAL IN terminal on
the main unit.
Format SD Card
While playing
Depending on the media and contents, displayed items are different.
Enjoying BD-Live or
picture-in-picture in BD-Video
space.
3 Insert the disc.
VQT3D27
26
Downloaded from www.Manualslib.com manuals search engine
Enjoying 3D video Useful functions
You can enjoy powerful 3D videos with realistic sensations by
connecting this unit with a High Speed HDMI Cable to a 3D
1 While playing,
compatible TV. Press [SUB MENU].
2 Press [3, 4] to select 3D Settings and
press [OK].
3 Select an item, then press [OK].
Signal Original Keep original picture
Playback
Format format.
Side by side 3D picture format
comprising of left and right
screens.
2D to 3D Converts 2D pictures to 3D
The illustration is an image. effect.
3D Normal Playback pictures with
Preparation Picture normal 3D effects.
Connect 3D compatible TV to an HDMI AV OUT terminal of Mode
this unit using a High Speed HDMI Cable and select HDMI Soft You can enjoy 3D pictures
video input mode on the TV. ( 14, 15) with a feeling of
Perform the necessary preparations for the TV. broadness, holding back
the depth perception.
Method of playback is the same as normal disc playback. Manual Set 3D effect manually.
( 25) Settings
Playback following the instructions displayed on the screen. Distance
Set the amount of depth
perception.
3D settings Screen Type
Selects how the screen
Perform the following settings as necessary. appears during 3D
playback (flat or round).
3D BD-Video It is also possible to play back 3D discs Frame Width
Playback in 2D (conventional video). ( 37) Set the amount of
3D Type If 3D video cannot be played back in feathering at the edge of
3D, change the settings as required by screen.
the connected TV format. ( 39) Frame Color
Change the settings for 3D on the TV Set the color of feathering
also when Checker board or Side at the edge of screen.
by side is selected.
3D Playback Hide the 3D viewing warning screen.
Precautions ( 39) Depending on the contents, displayed items are different.
Please refrain from viewing 3D images if you do not feel well or are
Pop-Out Level Adjust the pop-up position for the experiencing visual fatigue.
Playback menu or message screen etc. In the event that you experience dizziness, nausea, or other discomfort
while viewing 3D images, discontinue use and rest your eyes.
( 36) Depending on the connected TV, the video being played back might switch
to 2D video due to changes in resolution etc. Check the 3D setting on the
TV.
3D images may not output as settings of HDMI Resolution and 24p
Output. ( 39)
VQT3D27
27
Downloaded from www.Manualslib.com manuals search engine
Playing still pictures Useful functions
[BD] [DVD] [CD] [SD]
(BD-RE, DVD-R/R DL, CD-R/RW, SD Card) 1 Press [SUB MENU].
In order to play back 3D still pictures (MPO), this unit should be 2 Select an item, then press [OK].
connected to a Full HD 3D compatible TV via an HDMI While Photo View screen is displayed
terminal. Slideshow Start Slideshow
1 Insert the media. You can display still pictures one by one at
a constant interval.
If the menu is displayed, press [OK] or [3, 4, 2, 1] to Display Interval
select the item. ( 23) Change the display interval.
2 Press [3, 4] to select the folder and press Transition Effect
[OK]. Set display method.
Repeat Play
3D View : 3D still pictures (MPO) are sorted here. To play
back in 3D, select from 3D View. (Still pictures in 2D Repeat slideshow.
View are played back in 2D) Random Soundtrack
Background music is played in random
order.
Photo View
SD card
Soundtrack
2D View 3D View An MP3 on the iPod/iPhone or a music CD
Folder Name
XXXXXXXX
Photos
42
can be played back during the slideshow of
XXXX
JPEG on the SD card.
105
XXXXXXXX 58
XXXXXXXX 77
To exit the screen Wallpaper Set the still picture to the wallpaper of
Press [RETURN]. HOME screen. ( 23)
Pop-Out Pop-up position for the Playback menu or
Level message screen etc. can be adjusted
To show the still picture properties during 3D playback.
1 / 26
Date 11/12/2007 Depending on the condition of the unit and media contents, displayed items
Size 500 x 375 are different.
Manufacturer When viewing a 3D still picture, some functions may not work.
Equipment When a still picture with large number of pixels is played, the display
interval may become longer. Even if the setting is changed, the display
interval may not become shorter.
To exit the screen When both a music CD and an iPod/iPhone is inserted to this unit, the
iPod/iPhone has a priority to be played back as background music.
Press [STATUS]. Still pictures displayed as cannot be played back with this unit.
VQT3D27
28
Downloaded from www.Manualslib.com manuals search engine
Playing music Listening to the Radio
Radio
[DVD] [CD]
(DVD-R/R DL, music CD, CD-R/RW)
Presetting stations
1 Insert the media.
automatically
If the menu is displayed, press [OK] or [3, 4, 2, 1] to Up to 30 stations can be set.
select the item. ( 23)
1 Press [RADIO] to select FM.
2 Press [3, 4] to select the track and press
2 Press [STATUS] to select the position to
Playback
[OK].
start the auto preset search.
DIRECT NAVIGATOR Music list 0.09 4.30 LOWEST:
CD Track1
5 Tracks / Total Play Time 20min54sec To begin auto preset with the lowest frequency (FM87.9 or
No. Track Name Play Time FM87.5).
01 Track1 4min30sec
02 Track2 3min41sec CURRENT:
03 Track3 4min30sec
04 Track4 3min11sec To begin auto preset with the current frequency.*
05 Track5 5min 2sec
* To change the frequency, refer to Presetting stations
manually.
Radio
3 Press and hold [OK].
Release the button when AUTO is displayed.
Play
RETURN
The tuner starts to preset all the stations it can receive into
indicates the track currently playing. the channels in ascending order.
SET OK is displayed when the stations are set, and the radio tunes to the
last preset station.
Playing a track in another ERROR is displayed when automatic presetting is unsuccessful. Preset
the stations manually.
folder
1 While the DIRECT NAVIGATOR screen is displayed
Press [SUB MENU]. Presetting stations manually
2 Press [3, 4] to select Select Folder and Preparation
press [OK]. Select a radio broadcast.
1 Press [RADIO] to select FM.
2 Press [SEARCH6] or [SEARCH5] to select the
You cannot select folders that contain no compatible tracks. frequency.
To start automatic tuning, press and hold [SEARCH6], [SEARCH5]
until the frequency starts scrolling. Tuning stops when a station is found.
A station previously stored is overwritten when another station is stored in
the same channel preset.
VQT3D27
29
Downloaded from www.Manualslib.com manuals search engine
Enjoying TV with units
TV
VQT3D27
30
Downloaded from www.Manualslib.com manuals search engine
Linked operations with
VIERA Link HDAVI Control, based on the control functions provided by
Radio
2 Set the HDAVI Control operations on the connected automatically turn the unit on and select, AUX*2, ARC*1,*2
equipment (e.g., TV). or D-IN (DIGITAL IN)*2 as the source.
3 Turn on all HDAVI Control compatible equipment and You can control the volume setting using the volume or mute
select this units input channel on the connected TV so that button on the TVs remote control.
the HDAVI Control function works properly. If you turn off this unit, TV speakers will be automatically
When the connection or settings are changed, repeat activated.
this procedure.
TV
TV
TV speakers are active.
Setting the audio link The volume of this unit is set to 0.
Audio output is 2-channel audio.
Setting the audio link with the TV
With the remote control:
Select the actual TV audio connection on the main unit. When switching between this units speakers and TV speakers, the TV
screen may be blank for several seconds.
1 Press [HOME]. The audio from AUX, DIGITAL IN, FM Radio or iPod will be output
2 Press [3, 4, 2, 1] to select Others and press [OK]. from this unit's speakers even though the TV speakers are selected.
3 Press [OK] to select Setup.
4 Press [3, 4] to select TV / Device Connection.
5 Press [3, 4] to select TV Audio Input. Automatic input switching
6 Press [2, 1] to switch AUX, ARC or DIGITAL IN and
press [OK].
(Power on link)
Select AUX or ARC*1 in TV Audio Input when the
When the following operations are performed, the television
DIGITAL AUDIO IN terminal is used for the STB
will automatically switch the input channel and display the
connection.
corresponding action. When the TV is off, the TV will
Whenever the connection or settings are changed, reconfirm
automatically turn on.
the points above.
jWhen play starts on the unit
jWhen an action that uses the display screen is performed
Setting the audio link with the STB (e.g., DIRECT NAVIGATOR screen)
With the remote control: When you switch the TV input to TV tuner mode, this unit will
Select the STB input channel on the TV. automatically switch to AUX*2, ARC*1,*2 or D-IN
1 Press [EXT-IN] to select D-IN. (DIGITAL IN)*2.
2 Press [STATUS] to select CABLE/SATELLITE AUDIO This function does not work when the iPod/iPhone selector is
ON. chosen. ( 33)
If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select CABLE/SATELLITE AUDIO OFF in step
2 above and then repeat steps 1 to 2.
If using HDMI IN1 or HDMI IN2 as a source, set to
CABLE/SATELLITE AUDIO OFF in step 2.
VQT3D27
31
Downloaded from www.Manualslib.com manuals search engine
Using the iPod/iPhone
Other devices
* Playback functions on the main unit may be limited in the All mode.
Easy control only with VIERA In some locations, reception status of an iPhone may be poor when it is
loaded on this unit.
remote control
Only TV supports HDAVI Control 2 or later
When the iPhone receives a call while connected to this unit, playback, etc.
By using the TV remote control, you can play discs using the of the iPhone may stop.
Control Panel and display the Top Menu or Pop-up Menu, To prioritize the operation with the iPhone connected to this unit, make the
etc. setting so that the iPhone does not receive calls.
This works only during BD/DVD or SD playback and
resume modes.
iPod/iPhone Connection
1 Press [SUB MENU].
Preparation
e.g. BD-Video Before connecting/disconnecting the iPod/iPhone, turn the
Control Panel main unit off or reduce the volume of the main unit to its
Screen Aspect minimum.
Make sure that the video cable connection is made to view
Top Menu photos/videos from the iPod/iPhone.
Pop-up Menu
OK
1 Push the center of drawer (A), and pull out
SUB
MENU RETURN fully until it clicks to open the Dock for
iPod/iPhone (C).
2 Select an item, then press [OK]. 2 Install a Dock adapter (not supplied) (B)
before inserting your iPod/iPhone into the
The sub menu may not appear while the Top Menu for
BD-Video or DVD-Video is displayed.
dock.
3 Connect the iPod/iPhone (not supplied)
firmly.
The buttons that you can use for this unit can vary depending on the TV.
For details, refer to the operating instructions of the TV.
The operation of this unit may be interrupted when you press incompatible
buttons on the TV remote control.
Depending on the menu, some button operations cannot be performed
from the TVs remote control.
VQT3D27
32
Downloaded from www.Manualslib.com manuals search engine
1 iPod/iPhone Playback
Preparation
Make sure that the IPOD source is selected. Press [iPod] to
select the source.
To view photos/videos from the iPod/iPhone
Operate the iPod/iPhone menu to make the appropriate
photo/video output settings for your TV.
To display the picture, turn on the TV and select the
appropriate video input mode.
iPod/iPhone
3
Enjoy music/video
1 Press [iPod] to select IPOD.
2
2 Press [STATUS] several times to select the
music menu or videos menu.
You can also select "Videos" or "Music" by using HOME
menu. (> 23)
3 Press [3, 4] to select an item and press
[OK].
Repeat this step until the selected title starts playback.
Main unit
Press [2, 1] to display the previous or next page.
e.g., music playback screen
A The center of drawer
B Dock adapter (not supplied) iPod
TV
Good morning
Please be sure to use the adapter that is compatible Ronaldo
Other devices
D Make sure to match when inserting.
Carefully insert and remove the iPod/iPhone to A Album artwork
ensure long lasting product enjoyment. If album artwork is contained in the data of a song, it
Check that the connector has no dust or foreign will appear on the TV. If there is no album artwork,
materials before connecting. will be appear on TV.
Depending on the software version of your iPod/
iPhone, the album artwork may not appear properly.
It may take time to read the album artwork.
The 3D logo on the Dock for iPod/iPhone does not mean that the iPod/ Some operations may not work while reading the
iPhone has 3D capabilities.
Avoid using Wi-Fi mode on your iPhone while the network functions or
album artwork.
surround speakers on this unit are in use wirelessly. To exit, press [RETURN].
About recharging the battery
iPod/iPhone will start recharging regardless of whether this unit is on or off. Basic controls
IPOD will be shown on the main units display during iPod/iPhone
charging in main unit standby mode. (For music and video playback only)
Once fully recharged, additional recharging will not occur.
Buttons Functions
[1 PLAY] Play
[STOP]
Pause
[;PAUSE]
[:, 9] Skip
(Press and hold) Search
[SEARCH6, SEARCH5]
VQT3D27
33
Downloaded from www.Manualslib.com manuals search engine
Enjoying
Advanced operations
Enjoy photos
1 Press [iPod] to select IPOD. VIERA CASTTM
2 Press [STATUS] several times to select
ALL on the units display. You can access a selection of Internet services from the Home
You can also select "All" by using HOME menu. (> 23) screen with VIERA CAST, for example YouTube, Picasa Web
Albums. (Current as of December 2010)
3 Switch the TV input to video in.
4 Play a slideshow on your iPod/iPhone. Preparation
The picture will be displayed on your TV. Network connection (> 17)
Network setting (> 20)
To use the iPod touch/iPhone features
[BTT770] [BTT370]
1 Press the Home button on the iPod touch/iPhone.
2 Select the iPod touch/iPhone features on the touch screen To enjoy video communication (ex. SkypeTM) :
to operate. Connect this unit with optional Communication Camera
(TY-CC10W or compatible equipment).
You can use the remote control to operate the iPod/iPhone Depending on the area, this optional camera may not be
menu. available. Please consult your local Panasonic dealer for
The operation may vary among iPod/iPhone models. advice.
[3, 4]: To navigate menu items
[OK]: To go to the next menu.
[RETURN]: To return to the previous menu.
New York, NY
69 NW 10
mph
The setting of the playback mode will be kept until changes are made on TOMORROW
H
L
76
56
Surround sound effect and sound mode are available (> 24).
Featured Videos Featured Photos
MORE
XXXXXXXXXXX
VQT3D27
34
Downloaded from www.Manualslib.com manuals search engine
Playback menu
When playing content from a disc/SD card VIERA CAST cannot be
accessed by pressing [VIERA CAST].
In the following cases, settings are possible using Internet Content 1 Press [DISPLAY].
Settings ( 40) e.g., BD-Video
When restricting the use of VIERA CAST.
When the audio is distorted.
When wrong time is displayed Disc Signal Type
If using slow Internet connection, the video may not be displayed correctly. Play
Subtitle Off Main 1ENG
A high-speed Internet service with a speed of at least 6 Mbps is Video
recommended. Audio Subtitle Style - Angle -
Be sure to update the firmware when a firmware update notice is displayed
on the screen. If the firmware is not updated, you will not be able to use the
VIERA CAST function. ( 22) Menus Items Settings
VIERA CAST home screen is subject to change without notice.
TM
The services through VIERA CASTTM are operated by their respective 2 Press [3, 4] to select the menu and press
service providers, and service may be discontinued either temporarily or [1].
permanently without notice. Therefore, Panasonic will make no warranty
for the content or the continuity of the services.
All features of websites or content of the service may not be available.
3 Press [3, 4, 2, 1] to select the item and
Some content may be inappropriate for some viewers. press [1].
Some content may only be available for specific countries and may be
presented in specific languages. 4 Press [3, 4] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Disc
Signal Type
The recording method of
Video
Primary original video appears.
Other devices
Video Select the type of audio or
Soundtrack
language.
Select on/off of images. The
Video recording method of original
Secondary video appears.
Video
Advanced operations
Select on/off of audio and the
Soundtrack
language.
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending
on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
( 25, Changing audio)
Angle
Select the number of the angle.
VQT3D27
Some items may be changed only on the disc specific menu. ( 25)
35
Downloaded from www.Manualslib.com manuals search engine
Play Audio
Repeat Play Movie Sound Effect
(Only when the elapsed time is being displayed on the units Select the sound effect of the movie.
display.) Cinema Surround Plus:
Select the item which you want to repeat. The items displayed The function creates the sound of virtual speakers to
differ depending on the type of media. enhance the realistic surround feeling as if the sound comes
from all directions.
Select Off to cancel.
Music Sound Effects*1, *2
Random Select the sound effect of the music.
Select whether or not to play random. Digital Tube Sound:
This feature gives you warm sound, like that produced by a
vacuum tube amplifier.
Pop-Out Level
Re-master:
[Only when Full HD is selected in 3D Type ( 39).]
This feature gives you brighter sound by increasing the high
Pop-up position for the Playback menu or message screen etc.
frequency portion of the audio. (Discs recorded at 48 kHz or
can be adjusted during 3D playback.
less)
Recommended settings:
Video Re-master 1 Pop and rock
Advanced Setting
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for
Chroma Process outputting image, it produces clearer sound.
The high-resolution processing of HDMI chroma signals Only when you have selected Enable in High Clarity
produces a high-resolution picture with rich picture quality. Sound ( 38).
Detail Clarity *1 When audio is output from the HDMI AV OUT terminal this function is
The picture is sharp and detailed. effective only when Dolby D/Dolby D +/Dolby TrueHD or DTS/
DTS-HD is set to PCM. ( 38)
*2 This function has no effect when the type of audio is Dolby Pro Logic II.
Super Resolution
Pictures of normal image quality are corrected to sharp and
detailed images when output as 1080i/1080p from HDMI AV
OUT.
Progressive
Select the method of conversion for progressive output to suit
the type of material being played.
When the content is distorted change the settings from
Auto to Video.
24p
Movies and other material recorded on DVD-Video at 24p are
output at 24p.
Only when you have selected On in 24p Output ( 39)
VQT3D27
36
Downloaded from www.Manualslib.com manuals search engine
Setup menu Disc
Change the units settings if necessary. The settings remain
DVD-Video Ratings
intact even if you switch the unit to standby.
Set a ratings level to limit DVD-Video play.
1 Press [HOME]. Follow the on-screen instructions. Enter the 4-digit password
with the number buttons when the password screen is
2 Press [3, 4, 2, 1] to select Others and shown.
press [OK].
3 Press [OK] to select Setup. BD-Video Ratings
Set an age limit of BD-Video play.
Setup Follow the on-screen instructions. Enter the 4-digit password
Disc
with the number buttons when the password screen is
Video
shown.
Audio
Display
TV / Device Connection 3D BD-Video Playback
Network
Select the playback method of 3D compatible video software.
Others
OK
RETURN
Audio Language
Choose the language for audio.
4 Press [3, 4] to select the menu and press If Original is selected, the original language of each disc
[OK]. will be selected.
5 Press [3, 4] to select the item and press Enter a code (> 46) with the number buttons when you
select Other .
[OK].
If there are any other items, repeat these steps.
Subtitle Language
6 Press [3, 4, 2, 1] to select the option and Choose the language for the subtitle.
press [OK]. If Automatic is selected and the language selected for
Audio Language is not available, subtitles of that language
will automatically appear if available on that disc.
There may be differences in operation methods. If this happens, follow the Enter a code (> 46) with the number buttons when you
on-screen instructions for the operation. select Other .
About the password
The following items use the same password. Menu Language
Dont forget your password. Choose the language for the disc menus.
DVD-Video Ratings Enter a code (> 46) with the number buttons when you
BD-Video Ratings select Other .
Lock (> 40)
Advanced operations
BD-Live Internet Access (> 26)
You can restrict Internet access when BD-Live functions are
used.
If Allow ( Limited ) is selected, Internet access is permitted
only for BD-Live contents which have content owner
certificates.
VQT3D27
37
Downloaded from www.Manualslib.com manuals search engine
Downmix
Video Select the downmix system to enjoy multi-channel or
Still Mode (paused video) 2-channel sound.
Select the type of picture shown when you pause playback. Select Surround encoded to enjoy the surround sound.
There is no downmix effect on the bitstream audio signal.
Auto Automatically selects the type of picture The audio will be output in Stereo in the following cases:
shown. AVCHD playback
Field Select if jittering occurs when Auto is Dolby TrueHD playback
selected. Playback of secondary audio (including the button click
sound).
Frame Select if small text or fine patterns cannot
be seen clearly when Auto is selected.
High Clarity Sound
When connected to TV via the HDMI AV OUT terminal for
outputting image, it produces clearer sound.
Seamless Play Set to Enable and then set High Clarity Sound on the
The chapter segments in playlists are played seamlessly. Playback menu to On. (> 36)
Select On, when the picture freezes for a moment at the
chapters segment in playlists. Audio Delay
Mis-sync between the video and audio is corrected by delaying
Black Level Control the audio output.
Select lighter or darker for adjusting the black level control to
the desired setting for picture enhancement. Speaker
Refer to page 41
Audio
Display
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly. Status Messages
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only) Choose whether to show status messages automatically.
Auto is effective only when playing Dolby TrueHD.
On-screen Language
Choose the language for menus and on-screen messages.
Digital Audio Output
Press [OK] to show the following settings:
Screen Saver Function
Dolby D/Dolby D +/Dolby TrueHD This is to prevent burn-in on the screen.
DTS/DTS-HD When this is set to On:
Select the audio signal to output. If there is no operation for 5 minutes or more, DIRECT
Select PCM, when the connected equipment cannot NAVIGATOR screen switches to HOME menu automatically.
decode the respective audio format. While playing and pausing, etc., this function is not available.
Not making the proper settings may result in noise. While playing music (CD-DA or MP3), after about 5 minutes
DIRECT NAVIGATOR screen switches to a blank screen
with Screen Saver message.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and
secondary audio (including the button click sound). (> 26)
Front Panel Display
If Off is selected, the unit outputs the primary audio Changes the brightness of the units display.
only. If Auto is selected, the display is dimmed but brightens
when you perform some operations.
VQT3D27
38
Downloaded from www.Manualslib.com manuals search engine
HDMI Color Mode
TV / Device Connection This setting is for selecting color-space conversion of the
image signal when the unit is connected using an HDMI
3D Settings cable.
Advanced operations
Video/Audio:
HDMI Resolution When the TV is turned off, this unit will turn off
The items supported by the connected devices are automatically.
indicated on the screen as . When any item without Video:
is selected, the images may be distorted. When the TV is turned off, this unit will turn off except
If Auto is selected, automatically selects the output during the following conditions:
resolution best suited to the connected television. jCD or MP3 audio playback
To enjoy high-definition video up-converted to 1080p, jiPod/iPhone mode
you need to connect the unit directly to 1080p jRadio mode
compatible HDTV (High Definition Television). If this unit jAUX,ARC or D-IN (DIGITAL IN) mode (non-selected
is connected to an HDTV through other equipment, it TV AUDIO setting for VIERA Link)
must also be 1080p compatible. jD-IN (DIGITAL IN) mode (non-selected CABLE/
SATELLITE AUDIO setting for VIERA Link)
24p Output
When this unit is connected to a TV supporting 1080/24p TV Audio Input
output using an HDMI cable, movies and other material Select the TV audio input to work with the VIERA Link
recorded at 24p are output at 24p. operations.
When playing DVD-Video, set to On and then also set
24p in Video ( 36) to On.
When BD-Video images other than 24p are played,
images are output at 60p.
24p :
A progressive image recorded at a rate of 24 frames per
second (motion-picture film). Many BD-Video movie
contents are recorded in 24 frames/second in
accordance with the film materials.
VQT3D27
39
Downloaded from www.Manualslib.com manuals search engine
Network Others
Network Easy Setting (> 20) Remote Control Code
Change the remote control code, when other Panasonic
Network Settings products react to this remote control.
Perform network-related settings individually.
Press [OK] to show the following settings: Quick Start*
Speed of startup from power off is increased.
LAN Connection Mode Internal control unit will be powered when it is set to On, so
Select connection method. contents of the following will be different from the time it is
set to Off.
Wireless Settings Idle power consumption will increase. (More about the
This allows the Wireless router and connection settings to power consumption > 48)
be set and the current connection settings and connection * Depending on the power conserving setting activated on
state to be checked when a wireless connection is used. the TV, this function may have less effect when the unit is
started by the power on link function. (> 31)
Connection Setting
The Wireless router connection wizard will be displayed. Easy setup (> 19)
You can execute basic settings to optimize your home theater
IP Address / DNS Settings system.
This is for checking the state of the network connection
and setting the IP address and DNS-related. Restore Default Settings
Press [OK] to show the respective setting. This returns all values in the Setup menu and the Playback
Connection Speed Setting is enabled only when Auto menu, except for Remote Control Code, LAN Connection
Detect Connection Speed is turned Off. Mode, Wireless Settings, IP Address / DNS Settings,
Proxy Server Settings, Lock, DVD-Video Ratings and
Proxy Server Settings BD-Video Ratings etc. to the default settings.
This is for checking the state of connection with the Proxy
server and performing settings. System Information
Press [OK] to show the respective setting.
Display firmware version of this unit and wireless LAN module.
Lock
Automatic Update Check
You can restrict the usage of VIERA CAST.
When this equipment remains connected to the Internet, it
Follow the on-screen instructions. Enter the 4-digit
will check for the latest firmware version when it is turned
password with the number buttons when the password
on and you can update it if necessary.
screen is shown.
Audio Auto Gain Control
Update Now
Volume that is different depending on the contents is
You can update the firmware manually.
adjusted automatically to the standard volume while
using the VIERA CAST.
Depending on contents, this function effect will not
work.
Select Off when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the units
time to match your location.
Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select On when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
VQT3D27
40
Downloaded from www.Manualslib.com manuals search engine
B Surround speaker / Surround back speaker
Speaker settings Difference Setting
Delay time Approx. 170 cm (5 ft. 6 in.) 5.0 ms
For optimum listening with 5.1-channel sound, all the Approx. 340 cm (11 ft. 1 in.) 10.0 ms
speakers, except for the subwoofer, should be the same Approx. 510 cm (16 ft. 8 in.) 15.0 ms
distance from the seating position.
If either distance A or B is less than C, find the difference in
the relevant table and adjust the delay time to make up for the
difference. [BTT770] [BTT370]
A
When using the 7.1ch speaker system
C : B 1 Check the distance difference of both the front speakers
L C R
and the surround back speakers from the seating position.
A C : C 2 Set the delay time of the surround back speakers.
SW
B
LS RS D Adjusting speaker level
LS RS
dB
A B C: Primary listening distance Volume (Channel balance) ( 0 )
A Approximate room dimensions (Effective when playing multi-channel audio)
B Actual speaker position
C Ideal speaker position 1 Select Test and press [OK].
D Circle of constant primary listening distance A test signal is output.
1 Press [3, 4, 2, 1] to select the distance 2 While listening to the test signal
box ( ms
0.0 ) and press [OK].
Press [3, 4] to adjust the volume of each
e.g., 5.1ch setting speaker.
The volume can be adjusted between r6 dB to s6 dB.
Set each speaker level according to the volume of the
ms dB
Front (L) and Front (R) speaker volume respectively.
L 0.0 C 0 R
Complete dB
0
3 Press [OK].
Test SW The test signal stops.
dB
0
ms
0.0
dB
0 e.g., 5.1ch setting
LS RS
ms dB
A Center (C) L 0.0 C 0 R
Advanced operations
dB
Test 0
SW
e.g., [BTT770] [BTT370] 7.1ch setting
dB
0
ms
0.0
dB
0
ms dB LS RS
L 0.0 C 0 R
Complete dB
0
Test SW
dB
0
ms
0.0
dB
0
A Center (C)
B Test
LS RS
C Left Surround (LS), Right Surround (RS)
LB
dB
0
ms
0.0
dB
0 RB To finish the speaker setting
Press [3, 4, 2, 1] to select Complete and press [OK].
C Left Surround back (LB), Right Surround back (RB)
VQT3D27
41
Downloaded from www.Manualslib.com manuals search engine
Speaker installation
Optional speaker settings
option H
I
335 mm (13 3/16q)
210 mm to 212 mm
[BTT270]
Front speaker,
(8 9/32q to 8 11/32q) Surround speaker
Attaching to a wall J 40 mm (1 9/16q)
K 63 mm (2 15/32q)
You can attach all of the speakers (except subwoofer) to a wall. L 322 mm (12 11/16q)
M 40 mm (1 9/16q)
The wall or pillar on which the speakers are to be attached
should be capable of supporting 10 kg (22 lbs) per screw. N 17.6 mm (11/16q)
Consult a qualified building contractor when attaching the O 98.7 mm (3 7/8q)
speakers to a wall. Improper attachment may result in
damage to the wall and speakers.
Do not attempt to attach these speakers to walls using [BTT770]
methods other than those described in this manual. Center speaker
VQT3D27
42
Downloaded from www.Manualslib.com manuals search engine
Troubleshooting guide
Disc cannot be played.
Reference
The following do not indicate a problem with this unit: This unit does not recognize the communication camera
jRegular disc rotating sounds. correctly.
jImage disturbance during search. Disconnect and reconnect the communication camera. If it
jImage disturbance when replacing 3D discs. still does not recognize the connection, turn the power of this
unit off and on again.
Unit does not respond to the remote
control or front panel buttons. Power
Press and hold [POWER /I] on the main unit for 5 seconds.
jIf still unable to power the unit off, disconnect the power cord, No power.
wait 1 minute, then reconnect the power cord. Insert the AC power supply cord securely into a household
AC outlet. (> 18)
Cannot eject disc.
The unit may have a problem. The unit switches to standby mode.
While the unit is off, press and hold [9] on the remote This unit will automatically turn to standby mode after 30
control and [< OPEN/CLOSE] on the unit at the same time for minutes if it is inactive. (> 7)
more than 5 seconds. When the time set for the sleep timer has passed, the power
will be turned off. (> 6)
General operation One of the units safety devices is activated. Press
[POWER /I] on the main unit to turn the unit on.
Optional speaker
To return to the factory preset
Select Yes in Restore Default Settings in the Setup menu. This unit is turned off when the input for the TV is switched.
(> 40) This is a normal phenomenon when using VIERA Link settings
(HDAVI Control 4 or later). For details please read the
To return all settings to the factory preset operating instructions for the TV.
Reset the unit as follows:
While the unit is off, press and hold [+ VOLUME], [< OPEN/ The unit does not turn off.
CLOSE] and [POWER /I] on the main unit at the same 1 Press and hold [POWER /I] on the main unit for 5 seconds.
time for more than 5 seconds. (If still unable to power the unit off, disconnect the power
Reference
No power.
No disc is inserted.
Ensure the AC power supply cord of the wireless system is
The disc may be upside down.
connected properly.
$ This operation is not available.
The wireless link indicator is flashing.
Some operations are unsupported by the unit. For example;
There is no link between the main unit and the wireless
jBD-Video: During playback, reverse slow-motion or
system. Turn the wireless system off and then back on.
reverse frame-by-frame is not possible.
Alternatively, turn the wireless system off, disconnect the AC
power supply cord and then reconnect it.
IP address is not set.
The IP Address in IP Address / DNS Settings is ---. ---.
The wireless link indicator does not light.
---. ---. Set the IP Address, Subnet Mask, and Default
Check that the main unit is turned on, and the wireless
Gateway. (Select the automatic address acquisition if
system is turned on.
necessary.)
Ensure that the digital transmitter is fully inserted into the slot
of the main unit. ( 17)
No Video
Depending on the connected iPod/iPhone, video menu may
The wireless link indicator keeps flashing between red and
not be available on the TV. Select ALL on the units display
green.
and operate video playback from your iPod/iPhone menu.
There is a power supply problem. Consult the dealer.
( 34)
No READ
information
The media is dirty or badly scratched. The unit cannot play. Display languages list
PLEASE WAIT Display Language Display Language Display Language
The unit is carrying out an internal process.This is not a ENG English JPN Japanese ARA Arabic
malfunction. You cannot operate the unit while PLEASE FRA French CHI Chinese HIN Hindi
DEU German KOR Korean PER Persian
WAIT is displayed. ITA Italian MAL Malay IND Indonesian
ESP Spanish VIE Vietnamese MRI Maori
NLD Dutch THA Thai BUL Bulgarian
SET SVE Swedish POL Polish RUM Romanian
( stands for a number.) NOR Norwegian CES Czech GRE Greek
DAN Danish SLK Slovak TUR Turkish
The remote control and main unit are using different codes. POR Portuguese HUN Hungarian Others
Change the code on the remote control. RUS Russian FIN Finnish
Press and hold [OK] and the indicated
number button at the same time for Language code list
more than 5 seconds.
Language Code Language Code Language Code
Abkhazian 6566 Gujarati: 7185 Rhaeto-Romance:
H or F Afar: 6565 Hausa: 7265 8277
( stands for a number.) Afrikaans: 6570 Hebrew: 7387 Romanian: 8279
Check and correct the speaker cable connections. Albanian: 8381 Hindi: 7273 Russian: 8285
Amharic: 6577 Hungarian: 7285 Samoan: 8377
There is something unusual. Arabic: 6582 Icelandic: 7383 Sanskrit: 8365
Check the unit using the troubleshooting guide. If the service Armenian: 7289 Indonesian: 7378 Scots Gaelic: 7168
number does not disappear, do the following. Assamese: 6583 Interlingua: 7365 Serbian: 8382
Aymara: 6589 Irish: 7165 Serbo-Croatian: 8372
1 Disconnect the plug from the household AC outlet, wait a Azerbaijani: 6590 Italian: 7384 Shona: 8378
few seconds, then reconnect it. Bashkir: 6665 Japanese: 7465 Sindhi: 8368
2 Press [POWER /I] to turn the power on. Basque: 6985 Javanese: 7487 Singhalese: 8373
Bengali; Bangla: Kannada: 7578 Slovak: 8375
If the service number does not disappear despite doing the
6678 Kashmiri: 7583 Slovenian: 8376
above, request service from the dealer. Inform the dealer of Bhutani: 6890 Kazakh: 7575 Somali: 8379
the service number when requesting service. Bihari: 6672 Kirghiz: 7589 Spanish: 6983
Breton: 6682 Korean: 7579 Sundanese: 8385
Bulgarian: 6671 Kurdish: 7585 Swahili: 8387
UPD/ Burmese: 7789 Laotian: 7679 Swedish: 8386
( stands for a number.) Byelorussian: 6669 Latin: 7665 Tagalog: 8476
Cambodian: 7577 Latvian, Lettish: 7686 Tajik: 8471
The firmware is being updated. Please do not turn off power. Catalan: 6765 Lingala: 7678 Tamil: 8465
Chinese: 9072 Lithuanian: 7684 Tatar: 8484
IPOD OVER CURRENT ERROR Corsican: 6779 Macedonian: 7775 Telugu: 8469
Croatian: 7282 Malagasy: 7771 Thai: 8472
The iPod/iPhone is drawing too much power. Remove the Czech: 6783 Malay: 7783 Tibetan: 6679
iPod/iPhone, and turn the unit off and on again. Danish: 6865 Malayalam: 7776 Tigrinya: 8473
Dutch: 7876 Maltese: 7784 Tonga: 8479
English: 6978 Maori: 7773 Turkish: 8482
START Esperanto: 6979 Marathi: 7782 Turkmen: 8475
The system is being restarted during the firmware update. Estonian: 6984 Moldavian: 7779 Twi: 8487
Please do not turn off power. Faroese: 7079 Mongolian: 7778 Ukrainian: 8575
Fiji: 7074 Nauru: 7865 Urdu: 8582
Finnish: 7073 Nepali: 7869 Uzbek: 8590
FINISH French: 7082 Norwegian: 7879 Vietnamese: 8673
The firmware update is completed. Frisian: 7089 Oriya: 7982 Volapk: 8679
Galician: 7176 Pashto, Pushto: 8083 Welsh: 6789
Georgian: 7565 Persian: 7065 Wolof: 8779
NOT CONDITIONAL German: 6869 Polish: 8076 Xhosa: 8872
Greek: 6976 Portuguese: 8084 Yiddish: 7473
The requested operation cannot be conducted.
Greenlandic: 7576 Punjabi: 8065 Yoruba: 8979
Guarani: 7178 Quechua: 8185 Zulu: 9085
VQT3D27
46
Downloaded from www.Manualslib.com manuals search engine
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the United States
and other countries.
This item incorporates copy protection technology that is protected by This product incorporates the following software:
U.S. patents and other intellectual property rights of Rovi Corporation. (1) the software developed independently by or for Panasonic
Reverse engineering and disassembly are prohibited. Corporation,
(2) the software owned by third party and licensed to Panasonic
Corporation,
(3) the software licensed under the GNU General Public License,
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are Version 2 (GPL v2),
trademarks or registered trademarks of HDMI Licensing LLC in the (4) the software licensed under the GNU LESSER General Public
United States and other countries. License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the
GPL v2 and/or LGPL v2.1
This product is licensed under the AVC patent portfolio license and For the software categorized as (3) and (4), please refer to the terms
VC-1 patent portfolio license for the personal and non-commercial use and conditions of GPL v2 and LGPL v2.1, as the case may be at
of a consumer to (i) encode video in compliance with the AVC Standard http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
and VC-1 Standard (AVC/VC-1 Video) and/or (ii) decode AVC/VC-1 http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
Video that was encoded by a consumer engaged in a personal and In addition, the software categorized as (3) and (4) are copyrighted by
non-commercial activity and/or was obtained from a video provider several individuals. Please refer to the copyright notice of those
licensed to provide AVC/VC-1 Video. No license is granted or shall be individuals at
implied for any other use. Additional information may be obtained from http://www.am-linux.jp/dl/AWBPP11
MPEG LA, LLC.
See http://www.mpegla.com. The GPL/LGPL software is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY, without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to
HDAVI Control is a trademark of Panasonic Corporation. any third party who contacts us at the contact information provided
below, for a charge no more than our cost of physically performing
source code distribution, a complete machine-readable copy of the
corresponding source code covered under GPL v2/LGPL v2.1.
VIERA Link is a trademark of Panasonic Corporation.
Contact Information
[email protected]
VIERA CAST is a trademark of Panasonic Corporation. Source code is also freely available to you and any other member of
the public via our website below.
EZ Sync is a trademark of Panasonic Corporation. http://www.am-linux.jp/dl/AWBPP11
DVD Logo is a trademark of DVD Format/Logo Licensing Corporation. Part of the software embedded in this product is gSOAP software.
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van
Engelen, Genivia inc. All Rights Reserved.
Reference
VIDEO SECTION
Signal system: NTSC
Video output
Reference
As of December 2010
User memo: The model number and serial number of this product can be
DATE OF PURCHASE ________________________ found on either the back or the bottom of the unit.
DEALER NAME ______________________________ Please note them in the space provided below and keep for
DEALER ADDRESS __________________________ future reference.
___________________________________________
MODEL NUMBER _____________________________
TELEPHONE NUMBER _______________________
VQT3D27 SERIAL NUMBER _____________________________
50
Downloaded from www.Manualslib.com manuals search engine
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand
product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in Canada, which product
was not sold "as is", and which product was delivered to you in new condition in the original packaging.
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and
tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are
caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect,
mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper
maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as
hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or
damage that is attributable to acts of God.
Dry cell batteries are also excluded from coverage under this warranty.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL
PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY.
(As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to
media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the
exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific
legal rights and you may have other rights which vary depending on your province or territory.
WARRANTY SERVICE
For product operation and information assistance, please contact:
PRODUCT REPAIRS
51
Downloaded from www.Manualslib.com manuals search engine
Index
A L R
Audio LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Radio . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Changing audio. . . . . . . . . . . . . . . . .25 Language Re-master . . . . . . . . . . . . . . . . . . . . . . . 36
Language . . . . . . . . . . . . . . . . . .35, 37 Audio . . . . . . . . . . . . . . . . . . . . . 35, 37 Restore Default Settings. . . . . . . . . . . 40
Menu . . . . . . . . . . . . . . . . . . . . . . . . 37 Resume play function . . . . . . . . . . . . . 25
B
On-screen . . . . . . . . . . . . . . . . . . . . 38
BD-Live. . . . . . . . . . . . . . . . . . . . . . . . . .26 S
Soundtrack. . . . . . . . . . . . . . . . . . . . 35
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . 35
C Subtitle . . . . . . . . . . . . . . . . . . . . 35, 37
Chapter. . . . . . . . . . . . . . . . . . . . . . . . . .26 V
N
VIERA CASTTM . . . . . . . . . . . . . . . . . . . 34
F Network
VIERA LinkTM HDAVI ControlTM . . . . 31
File format . . . . . . . . . . . . . . . . . . . . . . .49 Connection. . . . . . . . . . . . . . . . . . . . 17
Firmware update . . . . . . . . . . . . . . . . . .22 Setting . . . . . . . . . . . . . . . . . . . . 20, 40 W
Wireless LAN . . . . . . . . . . . . . . . . . . . . 17
I P
iPod/iPhone . . . . . . . . . . . . . . . . . . . . . .32 Playlists. . . . . . . . . . . . . . . . . . . . . . . . . 26
24p . . . . . . . . . . . . . . . . . . . . . . . . . 36, 39
Pop-up menu . . . . . . . . . . . . . . . . . . . . 25
3D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Q
Quick Start . . . . . . . . . . . . . . . . . . . . . . 40
As an ENERGY STAR Partner, Panasonic has determined that
this product meets the ENERGY STAR guidelines for energy efficiency.
For Canada only: The word Participant is used in place of the word Partner.