Professional Documents
Culture Documents
Boysen Plexibond
Boysen Plexibond
do)
LOCATE A DEALER (locate.do) | FIND A
CONTRACTOR (findcontractor.do)
(http://www.rdasiatrustedbrands.com/boysen_showcase.html)
(http://boysenknoxoutproject.com/)
http://www.boysen.com.ph/products.do?item_id=780
Surface Preparation:
1. BOYSEN Plexibond #7760 should be applied on bare concrete, wood, or metal NOT PREVIOUSLY
PAINTED.
2. Surface should be clean, free from oil, grease, dirt, any loose grit or mortar. Wet Masonry surfaces first
with water before applying mix to avoid abrupt drying and cracking of the applied modified cement,
especially under hot and sunny conditions.
Preparation of Mixture:
4. Ensure intimate mixing, stirring as often as possible to avoid settling. Mixture proportion should be kept
constant for a uniform texture.
5. Mix only enough material to prevent waste. Workability of BOYSEN Plexibond mixture is 30
minutes, while pot life is 2 hours.
Application:
1. Apply 2 coats of the BOYSEN Plexibond mixture by textured roller (orange peel texture) while
maintaining coverage rate at 5 -6 sq. meters per gallon.
2. Orange peel textured finish can also be achieved by applying on coat by brush and a second by mortar
gun. Recoating interval is 1 to 2 hours.
2. Reinforce joints, corners, and active cracks susceptible to cracking or movement with a strip of
fiberglass matting.
3. Put on the matting immediately after the second coat, while the mixture is still wet. The matting should
adhere to the mixture.
4. Make sure the BOYSEN Plexibond mix and the matting is completely dry before applying
succeeding coats.
6. Let dry for one day then apply a bond coat by brushing BOYSEN Plexibond straight from the can
prior to laying out mortar topping.
1. Add 3 parts by volume of fine uniform-sized sand to 1 part cement and mix with BOYSEN
Plexibond to trowellable consistency.
Note:
1. The effectiveness of BOYSEN Plexibond as waterproofing is limited to water coming from positive
side (water ingress above the coated part of the substrate) and not from the negative side (water coming
from the back of the coating applied on the substrate).
2. The cementitious coating will be able to cover hairline cracks but will not bridge gaps and active
structural cracks. Immediate repairs using suitable sealants should be done.
Painting:
For maximum durability, paint application is recommended. Allow BOYSEN Plexibond to dry at least
one (1) day before paint application. Suggested painting systems are:
http://www.boysen.com.ph/products.do?item_id=780
Video
http://www.boysen.com.ph/products.do?item_id=780