Setting Up Alfresco Office Services Using A non-SSL Connection Alfresco Documentation PDF
Setting Up Alfresco Office Services Using A non-SSL Connection Alfresco Documentation PDF
1
Office (http://docs.alfresco.com /concepts/aos-intro.html) Installing and configuring AOS
/aos1.1/concepts/aos-user.html) (http://docs.alfresco.com/aos1.1/concepts/aos-config-intro.html)
Installing and configuring AOS Configuring Alfresco Office Services (http://docs.alfresco.com
(http://docs.alfresco.com/aos1.1 /aos1.1/concepts/aos-config.html)
/concepts/aos-config-intro.html)
Prerequisites for using Alfresco
Office Services
(http://docs.alfresco.com/aos1.1
/concepts/aos-prereqs.html)
Installing Alfresco Office
Services
(http://docs.alfresco.com/aos1.1
/tasks/aos-install.html)
Installing Alfresco into an
existing web application If you are using AOS with a non-SSL connection, you must edit the
(http://docs.alfresco.com/aos1.1 Windows registry, or run a command at the Mac terminal for every client
/tasks/install-server-root.html) machine.
Considerations when using
Alfresco Office Services We strongly recommend that you activate SSL when using Alfresco Office
(http://docs.alfresco.com/aos1.1 Services. For more information, see Configuring SSL
/concepts/aos-issues.html) (http://docs.alfresco.com/5.1/concepts/configure-ssl-intro.html). This
information is provided in the case where it is not possible to set up SSL
Configuring Alfresco Office
in your environment.
Services
(http://docs.alfresco.com/aos1.1
1. If you are using Microsoft Office for Mac 2011 without SSL, run this
/concepts/aos-config.html)
command on the client machine:
Setting up Alfresco Office
Services using a non-SSL
defaults -currentHost write com.microsoft.registrationDB
connection
hkey_current_user\\hkey_local_machine\\software\\microsof
(http://docs.alfresco.com t\\office\\14.0\\common\\internet\\basicauthlevel -int 2
/aos1.1/tasks/aos-config-
nonSSL.html)
2. Follow the remaining steps if you are using Microsoft Office 2010 or
Setting up a global filepath to 2013. Set the following registry keys:
access Alfresco
(http://docs.alfresco.com Each registry key takes the following values:
/aos1.1/tasks
/aos-filepath.html)
Option Description
Configuring mapping
0 Basic authentication disabled
properties in Alfresco Office
Services 1 Basic authentication enabled for SSL shares only
(http://docs.alfresco.com
2 or Basic authentication enabled for SSL shares and for
/aos1.1/tasks/aos-props-
greater non-SSL shares
mapping.html)
Upgrading Alfresco Office Services
a. Enable basic authentication on the client machine. Change
from a previous version of Alfresco
or create the following registry key and set its value to 2:
(http://docs.alfresco.com/aos1.1
/tasks/aos-upgrade.html)
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Service
Troubleshooting AOS s\WebClient\Parameters\BasicAuthLevel" (REG_DWORD)
(http://docs.alfresco.com/aos1.1
/concepts
b. Update the registry on the client machine, using the
Note:If you are not being prompted for your credentials, try clicking the
small down arrow next to the Open button (instead of clicking the
Open button itself). The client will then prompt you for your
credentials and you can start working with documents from Alfresco
sites.
2 ratings
First Last