Professional Documents
Culture Documents
Sper 1c1 - Trip CKT Supvn
Sper 1c1 - Trip CKT Supvn
Department
Commissioning Standard Test
Formats
Description: SPER 1C1 TRIP CKT
Record No.:
SUPERVISION
Bay no.: Drawing ref.: Sheet:1 of 3
Contractor: Contract no.: Substation No :
3. ELECTRICAL TESTS:
A. FUNCTION TEST:
3 Indication Checked
18(+) , 28(-)
Drop-off voltage should be < 40V DC (Table 1 of Buyers Guide 1MRS 750
428-MBG).
11(+) , 21(-)
Current through the circuit 11(+) & 21(-) at 125V DC should be 1.5mA
(Table 1 of Buyers Guide 1MRS 750 428-MBG).
NOTE:
For testing purpose, the Aux. Supply for the terminal 11, 21 and the Aux. supply for
the terminal 18, 28 must be different.
The Pick-up & Drop off test should be done at the relay terminal 11(+), 21(-).
During the pick-up & drop off test do not disturb the Aux. Supply at terminal 18(+),
28(-).
During drop-off test the voltage should be reduced gradually in steps.
For each step wait 3 Sec to find correct drop off value.
Tested by: ENG. Witnessed by: ENG.
Typical operate time 3 Sec (Table 2 of Buyers Guide 1MRS 750 428-MBG).
Typical reset time 1 Sec (Table 2 of Buyers Guide 1MRS 750 428-MBG).
NOTE:
The timing test should be done at the relay terminal 11(+), 21(-).
During the timing test do not disturb the Aux. Supply at terminal 18(+), 28(-).
For the operating time, the voltage at the terminal should be reduced from 125V DC to
0V DC.
For the resetting time, the voltage at the terminal should be increased from 0V DC to
125V DC.
AL-BABTAIN