Lorentz Force
Lorentz Force
Lorentz Force
en.wikipedia.org /wiki/Lorentz_force
Electromagnetism
Electricity
Magnetism
Electrostatics[show]
Magnetostatics[show]
Electrodynamics[hide]
Electrical network[show]
Covariant formulation[show]
Scientists[show]
In physics (particularly in electromagnetism) the Lorentz force is the combination of electric and magnetic force on
a point charge due to electromagnetic fields. A particle of charge q moving with velocity v in the presence of an
electric field E and a magnetic field B experiences a force
F = q E + q v B {\displaystyle \mathbf {F} =q\mathbf {E} +q\mathbf {v} \times \mathbf {B} }
(in SI units [1][2]). Variations on this basic formula describe the magnetic force on a current-carrying wire (sometimes
called Laplace force), the electromotive force in a wire loop moving through a magnetic field (an aspect of Faraday's
law of induction), and the force on a charged particle which might be travelling near the speed of light (relativistic
form of the Lorentz force).
The first derivation of the Lorentz force is commonly attributed to Oliver Heaviside in 1889,[3] although other
historians suggest an earlier origin in an 1865 paper by James Clerk Maxwell.[4] Hendrik Lorentz derived it a few
years after Heaviside.[citation needed]
Contents
[hide]
Equation[edit]
1/15
Charged particle[edit]
The force F acting on a particle of electric charge q with instantaneous velocity v, due to an external electric field E
and magnetic field B, is given by (in SI units [1]): [5]
F = q ( E + v B ) {\displaystyle \mathbf {F} =q(\mathbf {E} +\mathbf {v} \times \mathbf {B} )}
where is the vector cross product. All boldface quantities are vectors. More explicitly stated:
in which r is the position vector of the charged particle, t is time, and the overdot is a time derivative.
A positively charged particle will be accelerated in the same linear orientation as the E field, but will curve
perpendicularly to both the instantaneous velocity vector v and the B field according to the right-hand rule (in detail,
if the fingers of the right hand are extended to point in the direction of v and are then curled to point in the direction
of B, then the extended thumb will point in the direction of F).
The term qE is called the electric force, while the term qv B is called the magnetic force.[6] According to some
definitions, the term "Lorentz force" refers specifically to the formula for the magnetic force,[7] with the total
electromagnetic force (including the electric force) given some other (nonstandard) name. This article will not follow
this nomenclature: In what follows, the term "Lorentz force" will refer only to the expression for the total force.
The magnetic force component of the Lorentz force manifests itself as the force that acts on a current-carrying wire
in a magnetic field. In that context, it is also called the Laplace force.
For a continuous charge distribution in motion, the Lorentz force equation becomes:
d F = d q ( E + v B ) {\displaystyle \mathrm {d} \mathbf {F} =\mathrm {d} q\left(\mathbf {E} +\mathbf {v}
\times \mathbf {B} \right)\,\!}
where dF is the force on a small piece of the charge distribution with charge dq. If both sides of this equation are
divided by the volume of this small piece of the charge distribution dV, the result is:
f = ( E + v B ) {\displaystyle \mathbf {f} =\rho \left(\mathbf {E} +\mathbf {v} \times \mathbf {B} \right)\,\!}
where f is the force density (force per unit volume) and is the charge density (charge per unit volume). Next, the
current density corresponding to the motion of the charge continuum is
f = E + J B {\displaystyle \mathbf {f} =\rho \mathbf {E} +\mathbf {J} \times \mathbf {B} \,\!}
The total force is the volume integral over the charge distribution:
F = ( E + J B ) d V . {\displaystyle \mathbf {F} =\iiint \!(\rho \mathbf {E} +\mathbf {J} \times \mathbf {B}
)\,\mathrm {d} V.\,\!}
In terms of and S, another way to write the Lorentz force (per unit volume) is [8]
where c is the speed of light and denotes the divergence of a tensor field. Rather than
the amount of charge and its velocity in electric and magnetic fields, this equation relates
the energy flux (flow of energy per unit time per unit distance) in the fields to the force exerted on a charge
distribution. See Covariant formulation of classical electromagnetism for more details.
The above-mentioned formulae use SI units which are the most common among experimentalists, technicians, and
engineers. In cgs-Gaussian units, which are somewhat more common among theoretical physicists, one has instead
where c is the speed of light. Although this equation looks slightly different, it is
completely equivalent, since one has the following relations:[1]
q c g s = q S I 4 0 , E c g s = 4 0 E S I , B c g s = 4 / 0 B S I , c = 1 0 0 . {\displaystyle
q_{\mathrm {cgs} }={\frac {q_{\mathrm {SI} }}{\sqrt {4\pi \epsilon _{0}}}},\quad \mathbf {E} _{\mathrm {cgs} }=
{\sqrt {4\pi \epsilon _{0}}}\,\mathbf {E} _{\mathrm {SI} },\quad \mathbf {B} _{\mathrm {cgs} }={\sqrt {4\pi /\mu
_{0}}}\,{\mathbf {B} _{\mathrm {SI} }},\quad c={\frac {1}{\sqrt {\epsilon _{0}\mu _{0}}}}.}
where 0 is the vacuum permittivity and 0 the vacuum permeability. In practice, the subscripts "cgs" and "SI" are
always omitted, and the unit system has to be assessed from context.
History[edit]
3/15
Trajectory of a particle with a positive or negative charge q under the
influence of a magnetic field B, which is directed perpendicularly out of
the screen.
The modern concept of electric and magnetic fields first arose in the theories of Michael Faraday, particularly his
idea of lines of force, later to be given full mathematical description by Lord Kelvin and James Clerk Maxwell.[15]
From a modern perspective it is possible to identify in Maxwell's 1865 formulation of his field equations a form of the
Lorentz force equation in relation to electric currents,[4] however, in the time of Maxwell it was not evident how his
equations related to the forces on moving charged objects. J. J. Thomson was the first to attempt to derive from
Maxwell's field equations the electromagnetic forces on a moving charged object in terms of the object's properties
and external fields. Interested in determining the electromagnetic behavior of the charged particles in cathode rays,
Thomson published a paper in 1881 wherein he gave the force on the particles due to an external magnetic field
as[3]
Thomson derived the correct basic form of the formula, but, because of some miscalculations and an incomplete
description of the displacement current, included an incorrect scale-factor of a half in front of the formula. Oliver
Heaviside invented the modern vector notation and applied it to Maxwell's field equations; he also (in 1885 and
1889) had fixed the mistakes of Thomson's derivation and arrived at the correct form of the magnetic force on a
moving charged object.[3][16][17] Finally, in 1892, Hendrik Lorentz derived the modern form of the formula for the
electromagnetic force which includes the contributions to the total force from both the electric and the magnetic
fields. Lorentz began by abandoning the Maxwellian descriptions of the ether and conduction. Instead, Lorentz
made a distinction between matter and the luminiferous aether and sought to apply the Maxwell equations at a
microscopic scale. Using Heaviside's version of the Maxwell equations for a stationary ether and applying
Lagrangian mechanics (see below), Lorentz arrived at the correct and complete form of the force law that now bears
his name.[18][19]
4/15
Trajectories of particles due to the Lorentz force[edit]
Main article: Guiding center
The electromagnetic force F on a test charge at a given point and time is a certain function of its charge q
and velocity v, which can be parameterized by exactly two vectors E and B, in the functional form:
F = q ( E + v B ) {\displaystyle \mathbf {F} =q(\mathbf {E} +\mathbf {v} \times \mathbf {B} )}
5/15
This is valid, even for particles approaching the speed of light (that is, magnitude of v = |v|
= c). [24] So the two vector fields E and B are thereby defined throughout space and time,
and these are called the "electric field" and "magnetic field". The fields are defined
everywhere in space and time with respect to what force a test charge would receive regardless of whether a
charge is present to experience the force.
As a definition of E and B, the Lorentz force is only a definition in principle because a real particle (as opposed to
the hypothetical "test charge" of infinitesimally-small mass and charge) would generate its own finite E and B fields,
which would alter the electromagnetic force that it experiences. In addition, if the charge experiences acceleration,
as if forced into a curved trajectory by some external agency, it emits radiation that causes braking of its motion.
See for example Bremsstrahlung and synchrotron light. These effects occur through both a direct effect (called the
radiation reaction force) and indirectly (by affecting the motion of nearby charges and currents). Moreover, net force
must include gravity, electroweak, and any other forces aside from electromagnetic force.
If the wire is not straight but curved, the force on it can be computed by applying this formula to each infinitesimal
segment of wire d, then adding up all these forces by integration. Formally, the net force on a stationary, rigid wire
carrying a steady current I is
F = I d B {\displaystyle \mathbf {F} =I\int \mathrm {d} {\boldsymbol {\ell }}\times \mathbf {B} }
This is the net force. In addition, there will usually be torque, plus other effects if the wire is
not perfectly rigid.
One application of this is Ampre's force law, which describes how two current-carrying wires can attract or repel
each other, since each experiences a Lorentz force from the other's magnetic field. For more information, see the
article: Ampre's force law.
EMF[edit]
The magnetic force (qv B) component of the Lorentz force is responsible for motional electromotive force (or
motional EMF), the phenomenon underlying many electrical generators. When a conductor is moved through a
magnetic field, the magnetic field exerts opposite forces on electrons and nuclei in the wire, and this creates the
EMF. The term "motional EMF" is applied to this phenomenon, since the EMF is due to the motion of the wire.
In other electrical generators, the magnets move, while the conductors do not. In this case, the EMF is due to the
electric force (qE) term in the Lorentz Force equation. The electric field in question is created by the changing
6/15
magnetic field, resulting in an induced EMF, as described by the MaxwellFaraday equation (one of the four modern
Maxwell's equations). [25]
Both of these EMFs, despite their apparently distinct origins, are described by the same equation, namely, the EMF
is the rate of change of magnetic flux through the wire. (This is Faraday's law of induction, see below.) Einstein's
special theory of relativity was partially motivated by the desire to better understand this link between the two
effects.[25] In fact, the electric and magnetic fields are different facets of the same electromagnetic field, and in
moving from one inertial frame to another, the solenoidal vector field portion of the E-field can change in whole or in
part to a B-field or vice versa.[26]
where
is the magnetic flux through the loop, B is the magnetic field, (t) is a surface
bounded by the closed contour (t), at all at time t, dA is an infinitesimal vector
area element of (t) (magnitude is the area of an infinitesimal patch of surface,
direction is orthogonal to that surface patch).
The sign of the EMF is determined by Lenz's law. Note that this is valid for not only a stationary wire but also for a
moving wire.
From Faraday's law of induction (that is valid for a moving wire, for instance in a motor) and the Maxwell Equations,
the Lorentz Force can be deduced. The reverse is also true, the Lorentz force and the Maxwell Equations can be
used to derive the Faraday Law.
Let (t) be the moving wire, moving together without rotation and with constant velocity v and (t) be the internal
surface of the wire. The EMF around the closed path (t) is given by: [27]
where
is the electric field and d is an infinitesimal vector element of the contour (t).
NB: Both d and dA have a sign ambiguity; to get the correct sign, the right-hand rule is used, as explained in the
article KelvinStokes theorem.
7/15
The above result can be compared with the version of Faraday's law of induction that appears in the modern
Maxwell's equations, called here the MaxwellFaraday equation:
E = B t . {\displaystyle \nabla \times \mathbf {E} =-{\frac {\partial \mathbf {B} }{\partial t}}\ .}
The MaxwellFaraday equation also can be written in an integral form using the Kelvin
Stokes theorem.[28]
(t)dF/q(r, t)=ddt(t)dAB
( r , t ) . {\displaystyle \oint _{\partial \Sigma
(t)}\mathrm {d} {\boldsymbol {\ell }}\cdot \mathbf {F} /q(\mathbf {r} ,\ t)=-{\frac {\mathrm {d} }{\mathrm {d} t}}\iint
_{\Sigma (t)}\mathrm {d} \mathbf {A} \cdot \mathbf {B} (\mathbf {r} ,\ t).}
(t)dF/q(r,t)=(t)dAt
B ( r , t ) + ( t ) v B d {\displaystyle \oint _{\partial \Sigma (t)}\mathrm {d} {\boldsymbol {\ell }}\cdot
\mathbf {F} /q(\mathbf {r} ,t)=-\iint _{\Sigma (t)}\mathrm {d} \mathbf {A} \cdot {\frac {\partial }{\partial t}}\mathbf
{B} (\mathbf {r} ,t)+\oint _{\partial \Sigma (t)}\!\!\!\!\mathbf {v} \times \mathbf {B} \,\mathrm {d} {\boldsymbol {\ell
}}}
( t ) d F / q ( r , t ) = ( t ) d E ( r , t ) + ( t ) v B ( r , t ) d {\displaystyle \oint
_{\partial \Sigma (t)}\mathrm {d} {\boldsymbol {\ell }}\cdot \mathbf {F} /q(\mathbf {r} ,\ t)=\oint _{\partial \Sigma
(t)}\mathrm {d} {\boldsymbol {\ell }}\cdot \mathbf {E} (\mathbf {r} ,\ t)+\oint _{\partial \Sigma (t)}\!\!\!\!\mathbf {v}
\times \mathbf {B} (\mathbf {r} ,\ t)\,\mathrm {d} {\boldsymbol {\ell }}}
Faraday's law of induction holds whether the loop of wire is rigid and
stationary, or in motion or in process of deformation, and it holds whether the magnetic field is constant in time or
changing. However, there are cases where Faraday's law is either inadequate or difficult to use, and application of
the underlying Lorentz force law is necessary. See inapplicability of Faraday's law.
8/15
If the magnetic field is fixed in time and the conducting loop moves through the field, the magnetic flux B linking the
loop can change in several ways. For example, if the B-field varies with position, and the loop moves to a location
with different B-field, B will change. Alternatively, if the loop changes orientation with respect to the B-field, the B
dA differential element will change because of the different angle between B and dA, also changing B. As a third
example, if a portion of the circuit is swept through a uniform, time-independent B-field, and another portion of the
circuit is held stationary, the flux linking the entire closed circuit can change due to the shift in relative position of the
circuit's component parts with time (surface (t) time-dependent). In all three cases, Faraday's law of induction
then predicts the EMF generated by the change in B.
Note that the Maxwell Faraday's equation implies that the Electric Field E is non conservative when the Magnetic
Field B varies in time, and is not expressible as the gradient of a scalar field, and not subject to the gradient theorem
since its rotational is not zero.[27][29]
E = A t {\displaystyle \mathbf {E} =-\nabla \phi -{\frac {\partial \mathbf {A} }{\partial t}}}
B = A {\displaystyle \mathbf {B} =\nabla \times \mathbf {A} }
F=q[ At+(vA)(v)A]
{\displaystyle \mathbf {F} =q\left[-\nabla \phi -{\frac {\partial
\mathbf {A} }{\partial t}}+\nabla (\mathbf {v} \cdot \mathbf {A}
)-(\mathbf {v} \cdot \nabla )\mathbf {A} \right]}
d A d t = A t + ( v ) A {\displaystyle {\frac {\mathrm {d} \mathbf {A} }{\mathrm {d} t}}={\frac {\partial
\mathbf {A} }{\partial t}}+(\mathbf {v} \cdot \nabla )\mathbf {A} }
F = q [ ( v A ) d A d t ] {\displaystyle \mathbf {F} =q\left[-\nabla (\phi -\mathbf {v} \cdot \mathbf {A}
)-{\frac {d\mathbf {A} }{\mathrm {d} t}}\right]}
9/15
F = q [ x ( x A ) + d d t x ( x A ) ] {\displaystyle \mathbf {F} =q\left[-\nabla _{\mathbf {x}
}(\phi -{\dot {\mathbf {x} }}\cdot \mathbf {A} )+{\frac {\mathrm {d} }{\mathrm {d} t}}\nabla _{\dot {\mathbf {x} }}
(\phi -{\dot {\mathbf {x} }}\cdot \mathbf {A} )\right]}
The Lagrangian for a charged particle of mass m and charge q in an electromagnetic field equivalently describes
the dynamics of the particle in terms of its energy, rather than the force exerted on it. The classical expression is
given by:[30]
where A and are the potential fields as above. Using Lagrange's equations, the
equation for the Lorentz force can be obtained.
The potential energy depends on the velocity of the particle, so the force is velocity dependent, so it is not
conservative.
Field tensor[edit]
Main articles: Covariant formulation of classical electromagnetism and Mathematical descriptions of the
electromagnetic field
Using the metric signature (1, 1, 1, 1), the Lorentz force for a charge q can be written in [31] covariant form:
10/15
d p d = q F U {\displaystyle {\frac {\mathrm {d} p^{\alpha }}{\mathrm {d} \tau }}=qF^{\alpha \beta
}U_{\beta }}
p = ( p 0 , p 1 , p 2 , p 3 ) = ( m c , p x , p y , p z ) , {\displaystyle p^{\alpha
}=\left(p_{0},p_{1},p_{2},p_{3}\right)=\left(\gamma mc,p_{x},p_{y},p_{z}\right)\,,}
F = ( 0 E x / c E y / c E z / c E x / c 0 B z B y E y / c B z 0 B x E z / c B y B x 0 ) {\displaystyle
F^{\alpha \beta }={\begin{pmatrix}0&-E_{x}/c&-E_{y}/c&-E_{z}/c\\E_{x}/c&0&-B_{z}&B_{y}\\E_{y}/c&B_{z}&0&-
B_{x}\\E_{z}/c&-B_{y}&B_{x}&0\end{pmatrix}}}
U=(U0,U1,U2,U3)=(c,vx,vy,
v z ) , {\displaystyle U_{\beta
}=\left(U_{0},U_{1},U_{2},U_{3}\right)=\gamma
\left(c,-v_{x},-v_{y},-v_{z}\right)\,,}
in which
dp1d=q[c(Exc)+(vy)(Bz)+(v
z)(By)]=q(Ex+vyBzvzBy)=q[Ex
+ ( v B ) x ] . {\displaystyle {\begin{aligned}{\frac {\mathrm {d} p^{1}}{\mathrm {d} \tau }}&=q\gamma
\left[c\left({\frac {E_{x}}{c}}\right)+(-v_{y})(-B_{z})+(-v_{z})(B_{y})\right]\\&=q\gamma \left(E_{x}+v_{y}B_{z}-
v_{z}B_{y}\right)\\&=q\gamma \left[E_{x}+\left(\mathbf {v} \times \mathbf {B} \right)_{x}\right]\,.\end{aligned}}}
d p d = q ( E + v B ) , {\displaystyle {\frac
{\mathrm {d} \mathbf {p} }{\mathrm {d} \tau
}}=q\gamma \left(\mathbf {E} +\mathbf {v} \times \mathbf {B} \right)\,,}
and since differentials in coordinate time dt and proper time d are related by the
Lorentz factor,
so we arrive at
d p d t = q ( E + v B ) . {\displaystyle {\frac {\mathrm {d} \mathbf {p} }{\mathrm {d} t}}=q\left(\mathbf {E}
+\mathbf {v} \times \mathbf {B} \right)\,.}
This is precisely the Lorentz force law, however, it is important to note that p is the
relativistic expression,
The electric and magnetic fields are dependent on the velocity of an observer, so the relativistic form of the Lorentz
force law can best be exhibited starting from a coordinate-independent expression for the electromagnetic and
magnetic fields F {\displaystyle {\mathcal {F}}} , and an arbitrary time-direction, 0 {\displaystyle \gamma _{0}}
. This can be settled through Space-Time Algebra (or the geometric algebra of space-time), a type of Clifford's
Algebra defined on a pseudo-euclidian space,[32] as
and
F {\displaystyle {\mathcal {F}}} is a space-time bivector (an oriented plane segment, just
like a vector is an oriented line segment), which has six degrees of freedom corresponding to boosts (rotations in
space-time planes) and rotations (rotations in space-space planes). The dot product with the vector 0
{\displaystyle \gamma _{0}} pulls a vector (in the space algebra) from the translational part, while the wedge-
12/15
product creates a trivector (in the space algebra) who is dual to a vector which is the usual magnetic field vector.
The relativistic velocity is given by the (time-like) changes in a time-position vector v = x {\displaystyle v={\dot {x}}}
, where
v 2 = 1 , {\displaystyle v^{2}=1,}
(which shows our choice for the metric) and the velocity is
Note that the order is important because between a bivector and a vector the dot product is anti-symmetric. Upon a
space time split like one can obtain the velocity, and fields as above yielding the usual expression.
Applications[edit]
The Lorentz force occurs in many devices, including:
In its manifestation as the Laplace force on an electric current in a conductor, this force occurs in many devices
including:
See also[edit]
[edit]
1. ^ Jump up to: a b c In SI units, B is measured in teslas (symbol: T). In Gaussian-cgs units, B is measured in
gauss (symbol: G). See e.g. "Geomagnetism Frequently Asked Questions" . National Geophysical Data
Center. Retrieved 21 October 2013.)
2. Jump up ^ The H-field is measured in amperes per metre (A/m) in SI units, and in oersteds (Oe) in cgs
units. "International system of units (SI)". NIST reference on constants, units, and uncertainty. National
Institute of Standards and Technology. Retrieved 9 May 2012.
4. ^ Jump up to: a b Huray, Paul G. (2009). Maxwell's Equations. Wiley-IEEE. p. 22. ISBN 0-470-54276-4.
5. ^ Jump up to: a b See Jackson page 2. The book lists the four modern Maxwell's equations, and then states,
"Also essential for consideration of charged particle motion is the Lorentz force equation, F = q ( E+ v B ),
which gives the force acting on a point charge q in the presence of electromagnetic fields."
6. Jump up ^ See Griffiths page 204.
7. Jump up ^ For example, see the website of the "Lorentz Institute": \ [1], or Griffiths.
8. ^ Jump up to: a b c Griffiths, David J. (1999). Introduction to electrodynamics. reprint. with corr. (3rd ed.).
Upper Saddle River, New Jersey [u.a.]: Prentice Hall. ISBN 978-0-13-805326-0.
9. Jump up ^ Delon, Michel (2001). Encyclopedia of the Enlightenment. Chicago, IL: Fitzroy Dearborn
Publishers. p. 538. ISBN 157958246X.
13/15
10. Jump up ^ Goodwin, Elliot H. (1965). The New Cambridge Modern History Volume 8: The American and
French Revolutions, 176393. Cambridge: Cambridge University Press. p. 130. ISBN 9780521045469.
11. Jump up ^ Meyer, Herbert W. (1972). A History of Electricity and Magnetism . Norwalk, Connecticut: Burndy
Library. pp. 3031. ISBN 0-262-13070-X.
12. Jump up ^ Verschuur, Gerrit L. (1993). Hidden Attraction : The History And Mystery Of Magnetism . New
York: Oxford University Press. pp. 7879. ISBN 0-19-506488-7.
13. Jump up ^ Darrigol, Olivier (2000). Electrodynamics from Ampre to Einstein. Oxford, [England]: Oxford
University Press. pp. 9, 25. ISBN 0-19-850593-0.
14. Jump up ^ Verschuur, Gerrit L. (1993). Hidden Attraction : The History And Mystery Of Magnetism . New
York: Oxford University Press. p. 76. ISBN 0-19-506488-7.
15. Jump up ^ Darrigol, Olivier (2000). Electrodynamics from Ampre to Einstein. Oxford, [England]: Oxford
University Press. pp. 126131, 139144. ISBN 0-19-850593-0.
16. Jump up ^ Darrigol, Olivier (2000). Electrodynamics from Ampre to Einstein. Oxford, [England]: Oxford
University Press. pp. 200, 429430. ISBN 0-19-850593-0.
17. Jump up ^ Heaviside, Oliver. "On the Electromagnetic Effects due to the Motion of Electrification through a
Dielectric". Philosophical Magazine, April 1889, p. 324 .
18. Jump up ^ Darrigol, Olivier (2000). Electrodynamics from Ampre to Einstein. Oxford, [England]: Oxford
University Press. p. 327. ISBN 0-19-850593-0.
19. Jump up ^ Whittaker, E. T. (1910). A History of the Theories of Aether and Electricity: From the Age of
Descartes to the Close of the Nineteenth Century. Longmans, Green and Co. pp. 420423. ISBN 1-143-
01208-9.
20. Jump up ^ See Griffiths page 326, which states that Maxwell's equations, "together with the [Lorentz] force
law...summarize the entire theoretical content of classical electrodynamics".
21. Jump up ^ See, for example, Jackson pp 7778.
22. Jump up ^ J.A. Wheeler; C. Misner; K.S. Thorne (1973). Gravitation. W.H. Freeman & Co. pp. 7273.
ISBN 0-7167-0344-0.. These authors use the Lorentz force in tensor form as definer of the electromagnetic
tensor F, in turn the fields E and B.
23. Jump up ^ I.S. Grant; W.R. Phillips; Manchester Physics (2008). Electromagnetism (2nd ed.). John Wiley &
Sons. p. 122. ISBN 978-0-471-92712-9.
24. Jump up ^ I.S. Grant; W.R. Phillips; Manchester Physics (2008). Electromagnetism (2nd Edition). John
Wiley & Sons. p. 123. ISBN 978-0-471-92712-9.
27. ^ Jump up to: a b Landau, L. D., Lifshits, E. M., & Pitaevski, L. P. (1984). Electrodynamics of continuous
media; Volume 8 Course of Theoretical Physics (Second ed.). Oxford: Butterworth-Heinemann. p. 63 (49
pp. 205207 in 1960 edition). ISBN 0-7506-2634-8.
28. Jump up ^ Roger F Harrington (2003). Introduction to electromagnetic engineering. Mineola, New York:
Dover Publications. p. 56. ISBN 0-486-43241-6.
29. Jump up ^ M N O Sadiku (2007). Elements of electromagnetics (Fourth ed.). NY/Oxford: Oxford University
Press. p. 391. ISBN 0-19-530048-3.
30. Jump up ^ Classical Mechanics (2nd Edition), T.W.B. Kibble, European Physics Series, Mc Graw Hill (UK),
14/15
1973, ISBN 0-07-084018-0.
31. Jump up ^ Jackson, J.D. Chapter 11
32. Jump up ^ Hestenes, David. "SpaceTime Calculus".
References[edit]
The numbered references refer in part to the list immediately below.
Feynman, Richard Phillips; Leighton, Robert B.; Sands, Matthew L. (2006). The Feynman lectures on physics
(3 vol.). Pearson / Addison-Wesley. ISBN 0-8053-9047-2.: volume 2.
Griffiths, David J. (1999). Introduction to electrodynamics (3rd ed.). Upper Saddle River, [NJ.]: Prentice-Hall.
ISBN 0-13-805326-X.
Jackson, John David (1999). Classical electrodynamics (3rd ed.). New York, [NY.]: Wiley. ISBN 0-471-30932-
X.
Serway, Raymond A.; Jewett, John W., Jr. (2004). Physics for scientists and engineers, with modern physics.
Belmont, [CA.]: Thomson Brooks/Cole. ISBN 0-534-40846-X.
Srednicki, Mark A. (2007). Quantum field theory. Cambridge, [England] ; New York [NY.]: Cambridge
University Press. ISBN 978-0-521-86449-7.
External links[edit]
15/15