Kobalt Lowes Charger
Kobalt Lowes Charger
18/20-VOLT
Lithium-Ion/NiCd
KOBALT and the K Design are
registered trademarks of LF, LLC. CHARGER
All Rights Reserved.
MODEL #K20-MC60A
Franais p. 17
Espaol p. 35
Product Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PRODUCT SPECIFICATIONS
Components Specifications
Charger input 120-Volts, 60Hz A/C only
Charging output 20V D/C
Charging time for batteries K18-LB15A: 20 min.
K18-LB30A: 30 min.
K18-NB15A: 60 min.
K20-LB20A: 35 min.
K20-LB40A: 45 min.
Optimum charging temperature 32F (0C) - 131F (55C) for
Lithium batteries
41F (5C) - 104F (40C) for
NiCd battery
Notice: For use with the following batteries only.
SAFETY INFORMATION
3
SAFETY INFORMATION
Electrical Safety
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adaptor plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce the risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep the cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable,
use a ground-fault circuit interrupter (GFCI) protected
supply. Use of a GFCI reduces the risk of electric shock.
4
SAFETY INFORMATION
ersonal Safety
P
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power
tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask, non-
skid safety shoes, hard hat, or hearing protection, used for
appropriate conditions, will reduce personal injuries.
Prevent unintentional starting. Ensure that the switch is in
the off-position before connecting to a power source and/or
battery pack, picking up or carrying the tool. Carrying power
tools with your finger on the switch or energizing power tools that
have the switch on invites accidents.
Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep
your hair, clothing and gloves away from moving parts.
Loose clothing, jewelry or long hair can be caught in moving
parts.
If devices are provided for the connection of dust-extraction
and collection facilities, ensure that these are connected
and properly used. Use of these devices can reduce dust-
related hazards.
5
SAFETY INFORMATION
6
SAFETY INFORMATION
7
SAFETY INFORMATION
8
SAFETY INFORMATION
Keep the cord and charger away from heat to prevent damage to
the housing or internal parts.
Do not allow gasoline, oils, petroleum-based products, etc. to come
in contact with plastic parts. These materials contain chemicals that
can damage, weaken, or destroy plastic.
An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in a
risk of fire and electric shock. If an extension cord must be used,
make sure that:
The pins on the plug of extension cord are the same number,
size and shape as those of the plug on charger.
The cord is properly wired and in good electrical condition
The size is large enough for A/C ampere rating of charger as
specified below:
9
SAFETY INFORMATION
10
PREPARATION
B A
Part Description
A Electric Contacts
B LCD Screen
C Air Vents
11
OPERATING INSTRUCTIONS
Lithium-Ion Batteries
It is not necessary to run down the Lithium-Ion battery pack charge
before recharging. Remove the battery pack from the tool and
recharge it when it is convenient.
NiCd Batteries
For best performance, fully charge and fully discharge the battery for
each cycle.
NOTICE: Before using it the first time, fully charge the battery pack.
A fully discharged battery pack will charge about 20-60 minutes,
depending on the type.
12
OPERATING INSTRUCTIONS
13
OPERATING INSTRUCTIONS
Power on;
Green Steady 2 seconds
ready to charge
Power on;
None Steady
no battery installed
Up to 90 a
Orange Hot/cold battery
minutes
Approx. 10 b
Red Defective battery
minutes
Orange
Alternates
10 - 40 Minutes remaining
between
minutes to full charge
Orange icons
Fully charged
None The backlight will turn
off automatically
aC harging will start when battery is within temperature range: 32F (0C) - 131F (55C).
b After approximately 10 minutes the charger will re-evaluate. If still defective, the
backlight will turn off.
14
OPERATING INSTRUCTIONS
Power on;
Green Steady 2 seconds
ready to charge
Power on;
None
no battery installed
Orange c
Hot/cold battery
Flashes d
Orange 2 minutes Deep discharge
slowly
Red e
Defective battery
Moves from
Orange Charging
left to right
Fully charged
None The backlight will turn
off automatically
c Charging will start when battery is within temperature range: 41F (5C) - 104F (40C).
d Battery voltage is very low; normal charging will begin in 1-2 minutes.
e After approx. 10 minutes the charger will re-evaluate.
15
CARE AND MAINTENANCE
Printed in China
16