Scribd Logo
Upload

Welcome to Scribd!

  • Flashlight List

    Uploaded by

    Robert Florez
    195 views3 pages
    listado

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    listado

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    195 views3 pages

    Flashlight List

    Uploaded by

    Robert Florez
    listado

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    Download as xlsx, pdf, or txt
    of 3

    CMM 25-60-02

    EF-1 FLASHLIGHT
    P2-07-0001-100 P2-07-0001-211
    P2-07-0001-101 P2-07-0001-214
    P2-07-0001-201 P2-07-0001-215
    P2-07-0001-205 P2-07-0001-400
    P2-07-0001-207

    BATTERY SHELF LIFE 4 years maximum at +20C.

    3.0 Battery Pack Replacement


    A. Unscrew bottom end cap from flashlight body. Remove and replace O-ring seal, if required.
    B. Disconnect battery/flashlight connector.
    C. Remove and replace battery pack.
    D. Mate flashlight and battery connections. Note that connector locking feature allows the connection to be made
    E. Replace bottom end cap.
    F. Place flashlight back into the bracket to turn-off the flashlight. Reinstall tamper shield, if installed.

    Reference Description
    Battery Pack, Model 213 P4-01-0021
    Bottom End Cap Seal A1-25-0014
    Tamper Shield, Model SE-4 A1-18-1030

    CMM 25-60-13
    AIR LITE 1E LED FLASHLIGHT SYSTEM
    P2-07-0015-001,
    P2-07-0015-002,
    P2-07-0015-003,
    P2-07-0015-004
    and P2-07-0015-005
    BATTERY SHELF LIFE 5 years in storage at 25C (77F)
    2. Repair Procedures (See IPL Figures 1, 1A, 1B and 1C)
    A. Battery Pack Replacement
    Handlight Assembly (Battery Pack Removal)
    (1) Remove the bottom cap assembly and the O-ring. Discard the O-ring.
    (2) Remove the battery pack from the tube assembly.
    NOTE: The top cap (head assembly) is bonded to the tube and cannot be removed.

    Handlight Assembly Consumables


    Reference Description
    Battery Pack PN P2-07-0021-002
    O-ring A1-25-0097-001
    Bottom Cap (including Lanyard) A3-06-2090-001 (Gray) (if reqd for replacement)
    A3-06-2090-003 (Beige) (if reqd for replacement)
    Tamper Shield A1-26-0086-001 (for P2-07-0015-001) if reqd
    A1-26-0086-002 (for P2-07-0015-002 and -004) if reqd
    e connection to be made only one way thus ensuring that polarity is observed.

    You might also like