Professional Documents
Culture Documents
GC Gas Column
GC Gas Column
Micropacked GC Columns
Above-Ambient Analyses of Permanent Gases and Light Hydrocarbons
Separate permanent gases, Analyzing the permanent gases oxygen, nitrogen, methane, carbon monoxide, and carbon diox-
including CO/CO2, without ide has been virtually impossible for a single gas chromatography (GC) or gas-solid chromatog-
cryogenic cooling. raphy (GSC) column, without sub-ambient temperatures.
Now, Resteks ShinCarbon ST material, a high surface area carbon molecular sieve (~1500 m2/g),
Rapid separations of permanent
is the ideal medium for separating gases and highly volatile compounds by GSC. A 2 m x 1 mm
gas/light hydrocarbon mixtures. ID micropacked column containing ShinCarbon ST separates the permanent gases in 10 minutes,
Excellent compatibility with most without cryogenic cooling (Figure 1).
GC detectorsminimal bleed, In addition to providing a breakthrough in analyses of permanent gases, ShinCarbon ST columns
minimal baseline rise. can separate light hydrocarbon / permanent gas mixtures. Figure 2 shows an analysis of perma-
nent gases plus acetylene, ethylene, and ethane, completed in less than 20 minutes. Natural gas
Preconditioned, less than 30 components (70% methane) also are cleanly separated (Figure 3). Other potential applications
minutes to stabilize. for ShinCarbon ST include analyses of sulfur dioxide and Freon fluorocarbons (Figure 4).*
*For analysis of other low molecular weight sulfur compounds, we recommend Rt-XLSulfur micropacked and
packed columns or Rtx-1 capillary columns.
Figure 1 Separate permanent gases Figure 2 Rapidly analyze light Figure 3 Separate components in
in 10 minutes, without cryogenic hydrocarbon/permanent gas natural gas.
cooling. mixtures. 1
2 34 2
Peaks
Peaks Peaks
1. Oxygen
1. Hydrogen 4. Carbon monoxide 1. C1 5. C4
2. Nitrogen
2. Oxygen 5. Methane 2. C2 6. iC5-isopentane
3. Carbon monoxide
3. Nitrogen 6. Carbon dioxide 3. C3 7. nC5
4. Methane
4. iC4-isobutane 8. Hexanes
5. Carbon dioxide
Column ShinCarbon ST, 100/120 mesh, 2m, 2 6. Acetylene
1/16in. OD, 1.0 mm ID (cat.# 19808) 7. Ethylene Column SilcoSmooth Tubing, 100/120
Sample Permanent gases mix, 8. Ethane mesh on Shincarbon ST, 1m, 1/16
approx. 5 mol % each OD, 1.0 mm ID (cat.# 19809)
Injection Sample C1-C6 hydrocarbons
Inj. Vol.: 5 L packed on-column Column ShinCarbon ST, 100/120 mesh, 2m, 3 Conc.: 0.5-8% varied
Inj. Temp.: 100 C 1/16in. OD, 1.0 mm ID (cat.# 19808) Injection packed on-column
Oven Sample Permanent gases-C1+C2 Inj. Temp.: 200 C
Oven Temp: 40 C (hold 3 min.) to 250 C at hydrocarbons Oven
8 C/min. (hold 10 min.) Injection Oven Temp: 125 C to 250 C at 16 C/min.
Carrier Gas He, constant flow Inj. Vol.: 5 L packed on-column Carrier Gas He, constant flow
Flow Rate: 10 mL/min. Inj. Temp.: 100 C Flow Rate: 10 mL/min.
Detector HID @ 200 C Oven Detector FID @ 250 C
Oven Temp: 40 C (hold 3 min.) to 250 C 45
at 8 C/min. (hold 10 min.)
5 Carrier Gas He, constant flow
1
Flow Rate: 10 mL/min.
Detector HID @ 200 C
GC_PC00666
GC_PC00665
GC_PC00672
1
6 8 8
3 4 7 67
5 6
0 min. 55 10
10 15 0 min. 20 55 10
10 15
15 20
20 min. 0
0 10 10 2020 30
30
Time (min) Time (min) Time (min)
*Please add column instrument configuration suffix number to cat.# when ordering. See chart on the next page.
U.S. 110 Benner Circle Bellefonte, PA 16823 1-814-353-1300 1-800-356-1688 fax: 1-814-353-1309 www.restek.com
China phone: +86-10-5629-6620 fax: +86-10-5814-3980 cn.restek.com
France phone: +33 (0)1 60 78 32 10 fax: +33 (0)1 60 78 70 90 www.restek.fr
Germany phone: +49 (0)6172 2797 0 fax: +49 (0)6172 2797 77 www.restekgmbh.de
Italy phone: +39-02-7610037 fax: +39-02-70100100 www.superchrom.it
Japan phone: +81 (3)6459 0025 fax: +81 (3)6459 0025 e-mail: [email protected]
UK phone: +44 (0)1494 563377 fax: +44 (0)1494 564990 www.thamesrestek.co.uk