Professional Documents
Culture Documents
GoPro Hero+ Manual (English)
GoPro Hero+ Manual (English)
facebook.com/GoPro youtube.com/GoPro Para descargar este manual de usuario en otro idioma, visite
gopro.com/getstarted.
Para baixar este manual do usurio em outro idioma, acesse
twitter.com/GoPro instagram.com/GoPro gopro.com/getstarted.
gopro.com/getstarted
gopro.com/getstarted
gopro.com/getstarted
,
gopro.com/getstarted.
/ Table of Contents / Table of Contents
4 5
/ The Basics / The Basics
6 7
Slim housing closed Swapping housing doors
8 9
/ Getting Started / Getting Started
POWERING ON + OFF
To Power On:
Press the Power/Mode button once. The camera status lights
flash three times and the sound indicator emits three beeps. When
Use brand name memory cards that meet these requirements: the camera status screen displays information, your camera is on.
microSD, microSDHC, or microSDXC (sold separately) To Power Off:
Capacity up to 64GB Press and hold the Power/Mode button for two seconds. The
Minimum of Class 10 or UHS-I rating camera status lights flash several times and the sound indicator
For a list of the recommended microSD cards, visit gopro.com/support. emits seven beeps.
NOTICE: Use care when handling memory cards. Avoid liquids, dust,
and debris. As a precaution, power off the camera before inserting
or removing the card. Check manufacturer guidelines regarding use
in acceptable temperature ranges.
10 11
/ Getting Started / Getting Started
CAMERA BACKDOORS
Your HERO+ camera comes with two types of backdoors.
12 13
/ Getting Started / Camera Display
CAMERA SOFTWARE UPDATES The camera status screen displays the following information about
To get the latest features and best performance from your HERO+ modes and settings:
camera, make sure you are using the most current camera software.
You can update your camera software via the GoPro App or GoPro
Studio software. For more information, visit gopro.com/getstarted.
CAMERA DEFAULT SETTINGS
The HERO+ camera powers up with the following default settings:
Video 1080p30
Photo 8MP
Burst 10 photos in 2 seconds (5 fps) 1. Camera Mode/FOV 5. Spot Meter
(field of view) (when feature is enabled)
Time Lapse 0.5 second intervals
2. Resolution/fps (frames per 6. Time Lapse Interval/Burst
QuikCapture Off second) /Megapixels Rate (not shown)
3. Number of Items Captured 7. Wireless (when on)
Wireless Off
4. Remaining Time/Photos on 8. Battery Life
PRO TIP: To open the settings menu for the current mode, press the microSD Card
Settings/Tag button. To change general camera settings that apply to
all modes, navigate to Setup mode.
Note: The icons that appear on the camera status screen vary by mode.
14 15
/ Camera Modes / Navigating Settings Menus
HERO+ features several camera modes. Press the Power/Mode Each camera mode has its own settings menu.
button repeatedly to cycle through the modes. To Navigate Settings Menus:
1. Verify that the camera is in the desired camera mode. If the icon
These modes appear:
for that mode does not appear on the camera status screen, press
Video Record video the Power/Mode button repeatedly until it appears.
2. Press the Settings/Tag button to open the settings menu for that
Photo Capture a single photo mode.
Burst Capture 10 photos in 2 seconds (5 fps) 3. Use the Power/Mode button to cycle through the settings.
16 17
/ Camera Menus + Icons / Camera Menus + Icons
18 19
/ Capturing Video / Capturing Video
CAPTURING VIDEO
1. Press the Power/Mode button repeatedly until you get to Video
[ ] mode.
2. Press the Shutter/Select button. The camera beeps once and the
camera status lights flash while the camera is recording.
3. To stop capturing, press the Shutter/Select button. The camera
status lights flash three times and the camera beeps
three times.
If the memory card is full or the battery is out of power, your camera
automatically stops recording. Your video is saved before the camera HILIGHT TAGGING
powers off. You can mark specific moments in your video as they happen with
HiLight Tags. HiLight Tags make it easy to find the best highlights
PRO TIP: When QuikCapture is enabled, you can turn the camera to share.
on and immediately begin capturing video just by pressing the You can add tags with your camera, the GoPro App, or the Smart
Shutter/Select button. For details, see QuikCapture (page 38). Remote (sold separately).
To Add a HiLight Tag with Your Camera:
While recording video, press the Settings/Tag button.
Tags are visible in the timeline during playback in the GoPro App or
GoPro Studio software.
PRO TIP: In the GoPro App, tap the screen during playback to display
the HiLight Tags in the timeline.
20 21
/ Capturing Photos / Capturing Burst Photos
In Photo mode, you can capture photos at a resolution of 8MP with Burst mode is perfect for capturing the definitive moment in fast-
Ultra Wide FOV. action sports. In this mode, you can capture 10 photos in 2 seconds
(5 fps). The resolution for these photos is 8MP with Ultra Wide FOV.
CAPTURING A SINGLE PHOTO
1. Press the Power/Mode button repeatedly until you get to Photo CAPTURING BURST PHOTOS
[ ] mode. 1. Press the Power/Mode button repeatedly until you get to Burst
2. Press the Shutter/Select button. The camera beeps two times, [ ] mode.
the camera status lights flash and the counter on the camera 2. Press the Shutter/Select button. The camera status lights flash
status screen increases by one. and the camera beeps multiple times.
22 23
/ Capturing Time Lapse Photos / Connecting to the GoPro App
Time Lapse mode captures a series of photos at set intervals. You can The free GoPro App lets you control your camera remotely using
use Time Lapse to capture photos of any activity, so you can choose a smartphone or tablet. Features include full camera control, live
the best ones later. You can also stitch the photos together in editing to preview, playback and sharing of content, creation of short highlight
create a Time Lapse video. The resolution for these photos is 8MP with clips, and camera software updates.
Ultra Wide FOV.
TO CONNECT YOUR CAMERA TO THE GOPRO APP:
CAPTURING TIME LAPSE PHOTOS 1. Download the GoPro App to your smartphone or tablet from the
1. Press the Power/Mode button repeatedly until you get to Time Apple App Store or Google Play.
Lapse [ ] mode. 2. Open the app.
2. Press the Shutter/Select button. The camera initiates countdown 3. Follow the apps on-screen instructions to connect your camera.
and the camera status lights flash each time a photo is captured. Note: If needed, the default password for your camera is goprohero.
3. To stop capturing, press the Shutter/Select button. The camera For complete pairing instructions, visit gopro.com/support.
status lights flash three times and the camera beeps three times.
PRO TIP: To quickly turn wireless on or off, press and hold the
PRO TIP: When QuikCapture is enabled, you can turn the camera on Settings/Tag button.
and immediately begin capturing Time Lapse photos just by pressing
and holding the Shutter/Select button for two seconds. For details,
see QuikCapture (page 38).
24 25
/ Transferring Files to a Computer / Playing Back Video and Photos
To play back your videos and view photos on a computer, first transfer You can play back your content on your computer or smartphone/
these files from your camera to a computer. Transferring frees up tablet (using the free GoPro App). You can also play back content by
space on your microSD card for new content. You can also transfer inserting the microSD card directly into a device, such as a computer
files to a computer using a card reader (sold separately). or compatible TV.
TO TRANSFER YOUR FILES TO A COMPUTER: PLAYING BACK VIDEOS AND PHOTOS ON A COMPUTER
1. Download and install free GoPro Studio software from To play back your video and photos on a computer, first transfer these
gopro.com/getstarted. The HERO+ camera was designed to files to your computer. For best results, visit gopro.com/getstarted to
work with GoPro Studio to help you easily transfer your files. download free GoPro Studio software.
2. Connect the camera to your computer using the included To Play Back Files on a Computer:
USB cable. 1. Transfer your files to a computer. For details, see Transferring Files
3. Press the Power/Mode button to power on the camera. to a Computer (page 26).
GoPro Studio Importer automatically opens. 2. Use the controls in GoPro Studio to play back your files.
4. Follow the on-screen instructions.
PRO TIP: Longer video files are written to your memory card in
segments. When viewing this content on a computer, you might
see separate files for each segment. Use GoPro Studio software to
combine the files into a longer video, if needed.
26 27
/ Playing Back Video and Photos / Settings
PLAYING BACK VIDEOS AND PHOTOS ON YOUR TV VIDEO SETTINGS
Playback on your TV/HDTV requires a USB card reader and For instructions on changing settings, see Navigating Settings Menus
compatible TV. (page 17).
Note: Some TVs do not support USB card readers.
Resolution, FPS, and FOV
To Play Back Content on a TV: HERO+ includes the video resolutions listed below. All resolutions
1. Insert the microSD card into a USB card reader (sold separately). include Auto Low Light at the 60/50 fps setting. Auto Low Light
2. Connect the card reader to your TV. automatically optimizes fps according to lighting conditions.
3. Use the controls on the TV to play back your files. FPS refers to frames per second. FOV refers to field of view.
28 29
/ Settings / Settings
30 31
/ Settings / Settings
PHOTO SETTINGS
INTERVAL
For instructions on changing settings, see Navigating Settings Menus
In Video mode, this setting applies only to Looping. Looping lets you (page 17).
continuously record and save only the best moments, which helps
to conserve space on your microSD card. Available intervals for INTERVAL
looping are 5, 20, 60, and 120 minutes. For example, if you select a
This setting applies only to Time Lapse mode. Interval determines the
5-minute interval, only the previous 5 minutes are saved when you
amount of time that passes between each captured photo. Available
stop recording.
intervals for Time Lapse range from 0.5 second (default) to 60
You can also select Max as the interval for Looping. With this option, seconds.
the camera records until the memory card is full, then overwrites the
oldest content to continue recording. The default option for Looping Interval Examples
is Off. 0.5-2 seconds Surfing, biking, or other sports
Note: To use Looping, be sure that your microSD card has sufficient space to create the loop segment
based on the interval that you select. If the microSD card becomes full, Looping does not overwrite 2 seconds Busy street corner
the content.
5-10 seconds Sunset
PRO TIP: Looping video files are written to your memory card in Lengthy activities, such as construction
10-60 seconds
segments. When viewing this content on a computer, you might projects
see separate files for each segment. Use GoPro Studio software to
combine the files into a longer video, if needed.
32 33
/ Settings / Setup Mode
In Setup mode, you can change settings that apply to all camera
SPOT METER
modes. For instructions on how to change the following settings,
This setting applies to all photo capture modes: Photo, Burst, see Navigating Settings Menus (page 17).
and Time Lapse. Spot Meter is good for capturing photos where
the lighting is different from where you are, such as capturing the WIRELESS
outdoors from within a car or capturing a shaded environment while
When wireless is on, a wireless status icon appears on the
standing in the sun. Spot Meter automatically sets the exposure based
camera status screen and the blue wireless lights blink
on a single spot in the middle of the image, rather than on the entire
intermittently.
frame. When Spot Meter is turned on, [ ] appears on the camera
display. The options for this setting are Off (default) and On. Setting Description
Note: Changes that you make to the Spot Meter setting in one mode (Photo, Burst, or Time Lapse)
apply only to that mode. To adjust this setting for another mode, adjust the setting within that mode. Off (default)
Camera connects to the GoPro App. For
GoPro App instructions on connecting to this app, see
Connecting to the GoPro App (page 25).
Camera connects to the GoPro remote
REM CTRL control (sold separately). For instructions on
pairing, see the user manual for the remote.
Resets your camera's wireless name and
RESET Wi-Fi
password to the defaults.
34 35
/ Setup Mode / Setup Mode
Resetting Your Camera's Wireless Name and Password
ORIENTATION
1. Power on the camera.
2. Press the Power/Mode button repeatedly until you get to Setup, This setting eliminates the need to flip your video during editing when
then press the Shutter/Select button to select it. the camera is mounted upside down.
3. Press the Shutter/Select button to open the wireless menu. Setting Description
4. Press the Power/Mode button repeatedly until you get to Reset
Up (default) Camera is used right-side up.
Wi-Fi, then press the Shutter/Select button to select it.
5. Press the Power/Mode button to highlight Reset, then press the Down Camera is used upside down.
Shutter/Select button to select it. The password is reset to the
default: goprohero.
36 37
/ Setup Mode / Setup Mode
QUIKCAPTURE LEDS
With QuikCapture, you can quickly turn your camera on and begin This setting determines which status lights to activate. The options for
capturing video or Time Lapse photos. The options for this setting are this setting are Both On (front and back), Both Off, Front On, or Rear On.
On and Off (default). The default setting is Both On.
Note: You cannot start QuikCapture with the GoPro remote or the GoPro App.
BEEPS
To Capture Video with QuikCapture:
With the camera powered off, press the Shutter/Select button. You can set the sound indicator to On (default) or Off.
Your camera automatically powers on and begins capturing video.
VIDEO FORMAT
To Capture Time Lapse Photos with QuikCapture:
With the camera powered off, press and hold the Shutter/Select The Video Format setting governs frame rates for recording and
button for two seconds. Your camera automatically powers on and playback when viewing video on a TV/HDTV.
begins capturing Time Lapse photos.
Setting Description
To Stop Recording:
Press the Shutter/Select button to stop recording and power off Viewing video on an NTSC TV/HDTV
NTSC (default)
the camera. (most televisions in North America)
Viewing video on a PAL TV/HDTV (most
PAL
televisions outside of North America)
38 39
/ Setup Mode / Important Messages
MICROSD CARD MESSAGES
DATE/TIME
No card present. The camera requires a
Your cameras date and time are automatically set when you connect
NO SD microSD, microSDHC, or microSDXC card
your camera to the GoPro App or GoPro Studio software. This setting
(sold separately) to capture videos and photos.
lets you manually set the date and time.
FULL Card is full. Delete files or swap card.
DELETE Camera is unable to read card formatting.
SD ERR
Reformat the card in the camera.
This setting lets you delete the most recently captured video, photo,
Burst sequence, or Time Lapse sequence. You also have the option PRO TIP: Reformat your microSD card on a regular basis to ensure
to delete all files and reformat the memory card. Deleting all files is that the card remains in good condition.
useful after you transfer your files to your computer and want to make
room on your memory card for more content. The camera status
lights blink until the operation is complete.
NOTICE: If you select All/Format, the memory card is reformatted,
which deletes every file on the card.
40 41
/ Important Messages / Camera Housing
FILE REPAIR ICON SWAPPING BACKDOORS
You+can
Quick Release Buckle + Thumb Screw Slimswitch the= backdoor
housing of your HERO+ to suit your activity and
Complete Unit
If your last video file was corrupted during recording,
capture conditions.
the camera displays the File Repair icon while it tries to
repair the file. When this process is finished, press any To Change the Backdoor:
button to continue using the camera. 1. Open the backdoor of the housing so that it hangs downwards.
2. Firmly pull the backdoor downwards until it snaps free from the
main housing.
TEMPERATURE ICON
3. Line up the replacement backdoor into the hinge opening.
The Temperature icon appears on the camera status 4. Push upwards on the backdoor until it clicks into place.
Slim housing closed Swapping housing doors
screen when the camera becomes too hot and needs
to cool down. Simply let it sit and cool before attempting
to use it again. Your camera was designed to identify
conditions of overheating and is designed to respond
accordingly.
Slim housing remove camera Note: The camera cannot be removed from the housing. Slim housing insert camer
42 43
/ Camera Housing / Using the Mounts
PREVENTING WATER DAMAGE TO YOUR CAMERA ATTACHING YOUR CAMERA TO MOUNTS
The rubber seal that lines the camera housing forms a waterproof barrier To attach your HERO+ camera to a mount, you need a mounting buckle
that protects your HERO+ in wet and underwater conditions. and/or thumb screw, depending on the mount you are using. For more
Quick Releaseon
information Buckle + Thumb
mounts, visitScrew + Slim housing = Complete Unit
gopro.com.
Keep the camera housings rubber seal clean. A single hair or grain
of sand can cause a leak and damage your camera.
After every use in salt water, rinse the outside of the camera housing
with fresh water and dry. Not doing this can eventually cause
corrosion of the hinge pin and salt buildup in the seal, which can
cause failure. Mounting Buckle Thumb Screw Camera Complete Unit
To clean the seal, carefully remove it, rinse it in fresh water, and shake USING
Slim CURVED
housing closed+ FLAT ADHESIVE
SwappingMOUNTS
housing doors
it dry (drying with a cloth may cause lint to compromise the seal). The Curved + Flat Adhesive Mounts make it easy to attach the camera
Re-install the seal into the grooves in the backdoor of the camera to curved and flat surfaces of helmets, vehicles, and gear. Using the
housing. mounting buckle, the assembled camera housing can be clicked on
and off the secured Curved or Flat Adhesive Mounts.
WARNING: Failure to follow these steps each time you use
your GoPro can result in leaks that may damage or destroy your
camera. Water will damage both the camera and the battery,
which could cause an explosion or fire. Your warranty does not
cover water damage resulting from user error.
Slim housing remove camera
44 45
/ Using the Mounts / Using the Mounts
MOUNTING GUIDELINES LOCKING PLUG
Follow these guidelines when attaching mounts: If you are using HERO+ in sports such as surfing, use the standalone
Attach the adhesive mounts at least 24 hours prior to use. white locking plug to securely lock the mounting buckle fingers
Adhesive mounts must be mounted only on smooth surfaces. into place.
Porous or textured surfaces do not enable a proper bond. When
To Attach the Locking Plug:
applying the mount, firmly press it into place and ensure full
1. Loop the circular ring over the thumb screw. The circular ring
contact over the entire surface.
acts as a leash to prevent dropping or losing the locking plug.
Apply adhesive mounts to clean surfaces only. Wax, oil, dirt or
2. Slide the mounting buckle into the mount until it clicks
other debris reduce adhesion, which can result in a weak bond
into place.
and risk of losing the camera should the connection fail.
3. Press the U-shaped part of the plug into the U-shaped space in
Attach adhesive mounts in room temperature conditions.
the mounting buckle.
Mount adhesives do not bond properly if applied in cold or damp
environments to cold or damp surfaces, or if the surface is not
room temperature.
For more information on mounts, visit gopro.com.
WARNING: If using your camera with a GoPro mount or strap
intended for use with a helmet, always select a helmet that
meets the applicable safety standard.
Choose the right helmet for your particular sport or activity WARNING: To avoid injury in the event of an accident, do not use
and make sure that it is the right fit and size for you. Inspect the locking plug or tether when using a mounting device on a
your helmet to ensure that it is in good condition and follow the helmet or other personal protective gear.
helmet manufacturers instructions on safe helmet use.
Any helmet that has sustained a major impact should be
replaced. No helmet can protect against injury in every accident.
46 47
/ Battery / Battery
Your HERO+ camera, battery, and housing are integrated. You cannot BATTERY STORAGE AND HANDLING
remove the camera from the housing, or remove the battery from The camera contains sensitive components, including the battery.
the camera. Avoid exposing your camera to very cold or very hot temperatures.
Low or high temperature conditions may temporarily shorten the
The battery icon displayed in the camera status screen blinks
battery life or cause the camera to temporarily stop working properly.
when the battery drops below 10%. If the battery reaches 0% while
Avoid dramatic changes in temperature or humidity when using the
recording, the camera saves the file and powers off.
camera, as condensation may form on or within the camera.
MAXIMIZING BATTERY LIFE
The integrated camera housing protects the camera and battery from
To maximize battery life, close the GoPro App or turn off wireless.
water damage. For more information, see Camera Backdoors (page
Extreme cold temperatures can decrease battery life. To maximize
13). Do not turn on your camera if the camera (inside the housing)
battery life in cold conditions, keep the camera in a warm place prior
gets wet. If your camera is already on, turn it off immediately. Allow
to use.
the camera to dry thoroughly before using it again. Do not dry the
camera or battery with an external heat source such as a microwave
PRO TIP: QuikCapture helps maximize battery life. For details,
oven or hair dryer. Damage to the camera or battery caused by contact
see QuikCapture (page 38).
with liquid (inside the housing) is not covered under the warranty.
48 49
/ Troubleshooting / Troubleshooting
MY GOPRO WON'T POWER ON Playing a high bitrate HD video file over a low bandwidth USB
Make sure your GoPro is charged. To charge your camera, use the connection. Transfer the file to the computer to play back.
included USB cable and a computer. You can also use the GoPro Wall If your computer does not meet the minimum requirements,
or Auto Charger. make sure that all other programs on your computer are closed.
MY GOPRO WON'T RESPOND WHEN I PRESS A BUTTON I FORGOT MY CAMERAS USERNAME OR PASSWORD
Press and hold the Power/Mode button for eight seconds to reset your See Resetting Your Camera's Wireless Name and Password (page
camera. This reset saves all of your content and settings, and powers 36).
off your camera.
I POWERED OFF MY GOPRO, BUT THE BLUE LIGHT IS
MY PLAYBACK IS CHOPPY STILL BLINKING
Choppy video is typically not a problem with the file. If your footage The blue light indicates that wireless is on. To turn off wireless,
skips, one of these situations is likely the cause: press and hold the Settings/Tag button until the wireless status
Using an incompatible video player. Not all video players support lights blink rapidly and then turn off.
the H.264 codec. For best results, use GoPro Studio software, WHAT IS MY CAMERAS SERIAL NUMBER?
available for free at gopro.com/getstarted. The cameras serial number is listed in several places:
The computer does not meet the minimum requirements for On the bottom of the camera
HD playback. The higher the resolution and frame rate of your
On your cameras microSD card (in the version.txt file in the
video, the harder the computer has to work to play it back. If you
MISC folder)
are using GoPro Studio software to play back your files, be sure
On your cameras original packaging
that your computer meets the minimum system requirements,
available on gopro.com/getstarted. For more answers to commonly asked questions, see
gopro.com/support.
50 51
/ Customer Support
GoPro is dedicated to providing the best possible service. To reach GoPro
Customer Support, visit gopro.com/support.
/ Regulatory Information
To see the complete list of country certifications, refer to the Important
Product + Safety Information included with your camera.
/ Trademarks
GoPro, HERO, the GoPro logo, the GoPro Be a HERO logo, BacPac,
Protune, SuperView, and Wear It. Mount It. Love It. are trademarks or
registered trademarks of GoPro, Inc. in the U.S. and internationally.
Other names and marks are the property of their respective owners.
52