HUAWEI ALE-L21C432B564 Software Upgrade Guideline PDF
HUAWEI ALE-L21C432B564 Software Upgrade Guideline PDF
HUAWEI ALE-L21C432B564 Software Upgrade Guideline PDF
HUAWEI
ALE-L21C432B564
Software Upgrade Guideline
Contents
CONTENTS...................................................................................................................................... 2
4 UPGRADE OPERATIONS...................................................................................................... 4
1 Version introduction
ALE-L21C432B560
ALE-L21C432B550
ALE-L21C432B524
ALE-L21C432B204
ALE-L21C432B200
ALE-L21C432B194
ALE-L21C432B170
ALE-L21C432B010
1.2 Upgradepackage
1) To make sure that the Micro SD card is available and can be read and write.
Notes: A Micro SD card of 8GB or more should be available. It is recommended that The Micro
2) To make sure that the power of the battery is enough to run the upgrade process. It is
3) Upgrade operations will erase all user data. So if there is some important information,you
4) If the path of main package is a .zip file in chapter 1.2,you should unzip the .zip file firstly,and get
3 Upgrade introduction
There are two methods to upgrade: normal upgrade and force upgrade.
Normal upgrade needs to start the handset and enter the System Update module. Force upgrade is
justused when the handset cant boot up or cant enter the idle screen.
4 Upgrade operations
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD
Insert the Micro SD card into the handset and power on. After entering call
Step 4. When the progress bar stop, the phone will restart automatically.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the rootdirectory of the
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset.Press
the VOLUME UPandVOLUME DOWN key, and then press the POWER key to power on
Step 5. When the progress bar stop, the phone will restart automatically.
Step 2. Copy the entire dload folder (with Vendor package UPDATE.APP in it) to the root directory
Insert the Micro SD card into the handset and power on. After entering call
Step 3. When the progress bar stop, the phone will restart automatically.
Step 4. After vendor package upgrade successfully, you must manually restore factory settings.
5 Upgrade validate