Professional Documents
Culture Documents
ME 206 Fluid Machinery PDF
ME 206 Fluid Machinery PDF
Text Books:
1. Som, Introduction to Fluid Mechanics and Fluid Machines ,McGraw Hill Education India 2011
2. Bansal R. K., A Textbook of Fluid Mechanics and Hydraulic Machines, Laxmi
Publications,2005.
Reference Books:
1. Cengel Y. A. and J. M. Cimbala, Fluid Mechanics, Tata McGraw Hill, 2013
2. Yahya S. M, Fans, Blower and Compressor, Tata McGraw Hill, 2005.
3. Shepherd D. G, Principles of Turbo Machinery, Macmillan, 1969.
4. Stepanoff A. J, Centrifugal and Axial Flow Pumps, John Wiley & Sons, 1991.
5. Rajput R. K, Fluid Mechanics and Hydraulic Machines, S. Chand & Co.,2006.
6. Subramanya, Fluid mechanics and hydraulic machines, 1e McGraw Hill Education
India,2010
Course Plan
Sem.
Module Contents Hours Exam
Marks
Impact of jets: Introduction to hydrodynamic thrust of jet on a fixed and
moving surface (flat and curve), Series of vanes - work done and
efficiency
Hydraulic Turbines : Impulse and Reaction Turbines Degree of
I reaction Pelton Wheel Constructional features - Velocity triangles 7 15%
Eulers equation Speed ratio, jet ratio and work done , losses and
efficiencies, design of Pelton wheel Inward and outward flow
reaction turbines- Francis Turbine Constructional features Velocity
triangles, work done and efficiencies.
Axial flow turbine (Kaplan) Constructional features Velocity
triangles- work done and efficiencies Characteristic curves of
II turbines theory of draft tubes surge tanks Cavitation in turbines
Governing of turbines Specific speed of turbine , Type Number 7 15%
Characteristic curves, scale Laws Unit speed Unit discharge and
unit power.
FIRST INTERNAL EXAM
Rotary motion of liquids free, forced and spiral vortex flows
Rotodynamic pumps- centrifugal pump impeller types,-velocity
triangles-manometric head- work, efficiency and losses, H-Q
characteristic, typical flow system characteristics, operating point of a 7
III pump. Cavitation in centrifugal pumps- NPSH required and available- 15%
Type number-Pumps in series and parallel operations. Performance
characteristics- Specific speed-Shape numbers Impeller shapes based
on shape numbers.
Positive displacement pumps- reciprocating pump Single acting and
double acting- slip, negative slip and work required and efficiency-
indicator diagram- acceleration head - effect of acceleration and
friction on indicator diagram speed calculation- Air vessels and their 7
IV purposes, saving in work done to air vessels multi cylinder pumps. 15%
Multistage pumps-selection of pumps-pumping devices-hydraulic ram,
Accumulator, Intensifier, Jet pumps, gear pumps, vane pump and lobe
pump.
SECOND INTERNAL EXAM
Compressors: classification of compressors, reciprocating
compressor-single stage compressor, equation for work with and 7
V 20%
without clearance volume, efficiencies, multistage compressor,
intercooler, free air delivered (FAD)
Centrifugal compressor-working, velocity diagram, work done, power
required, width of blades of impeller and diffuser, isentropic
efficiency, slip factor and pressure coefficient, surging and chocking. 7
VI Axial flow compressors:- working, velocity diagram, degree of 20%
reaction, performance. Roots blower, vane compressor, screw
compressor.
END SEMESTER EXAM
Question Paper Pattern
Total marks: 100, Time: 3 hrs
The question paper should consist of three parts
Part A
4 questions uniformly covering modules I and II. Each question carries 10 marks
Students will have to answer any three questions out of 4 (3X10 marks =30 marks)
Part B
4 questions uniformly covering modules III and IV. Each question carries 10 marks
Students will have to answer any three questions out of 4 (3X10 marks =30 marks)
Part C
6 questions uniformly covering modules V and VI. Each question carries 10 marks
Students will have to answer any four questions out of 6 (4X10 marks =40 marks)
Note: In all parts, each question can have a maximum of four sub questions, if needed.